diff --git a/src/board/system76/galp3-c/peci.c b/src/board/system76/galp3-c/peci.c
index 93802aa..145d8f6 100644
--- a/src/board/system76/galp3-c/peci.c
+++ b/src/board/system76/galp3-c/peci.c
@@ -12,9 +12,6 @@
 int16_t peci_offset = 0;
 int16_t peci_temp = 0;
 uint8_t peci_duty = 0;
-uint8_t peci_tcontrol = 0;
-uint8_t peci_tjmax = T_JUNCTION;
-static bool peci_config_loaded = false;
 
 #define PECI_TEMP(X) (((int16_t)(X)) << 6)
 #define PWM_DUTY(X) ((uint8_t)(((((uint16_t)(X)) * 255) + 99) / 100))
@@ -78,55 +75,6 @@ void peci_init(void) {
     PADCTLR = 0x02;
 }
 
-// Read tjmax using index 16 of RdPkgConfig
-static void peci_config(void) {
-    // Wait for completion
-    while (HOSTAR & 1) {}
-    // Clear status
-    HOSTAR  = HOSTAR;
-
-    // Enable PECI, clearing data fifo's
-    HOCTLR = (1 << 5) | (1 << 3);
-    // Set address to default
-    HOTRADDR = 0x30;
-    // Set write length
-    HOWRLR = 5;
-    // Set read length
-    HORDLR = 5;
-    // Set command
-    HOCMDR = 0xA1;
-    // Set Host ID ?
-    HOWRDR = 0x00;
-    // Set index
-    HOWRDR = 16;
-    // Set parameter
-    HOWRDR = 0;
-    HOWRDR = 0;
-    // Start transaction
-    HOCTLR |= 1;
-
-    // Wait for completion
-    while (HOSTAR & 1) {}
-
-    if (HOSTAR & (1 << 1)) {
-        // Use result if finished successfully
-
-        //TODO: check completion code
-        uint8_t data = HOWRDR;
-
-        // Throw away reserved byte
-        data = HOWRDR;
-        // Tead tcontrol for now
-        peci_tcontrol = HOWRDR;
-        // Read tjmax
-        peci_tjmax = HOWRDR;
-        // Throw away reserved byte
-        data = HOWRDR;
-
-        peci_config_loaded = true;
-    }
-}
-
 // PECI information can be found here: https://www.intel.com/content/dam/www/public/us/en/documents/design-guides/core-i7-lga-2011-guide.pdf
 void peci_event(void) {
     // Wait for completion
@@ -156,12 +104,6 @@ void peci_event(void) {
         uint8_t high = HORDDR;
         peci_offset = ((int16_t)high << 8) | (int16_t)low;
 
-        // TODO: Update max value if possible
-        // if (!peci_config_loaded) {
-        //     peci_config();
-        // }
-
-        // TODO: tjmax
         peci_temp = PECI_TEMP(T_JUNCTION) + peci_offset;
         peci_duty = fan_duty(peci_temp);
     } else {
diff --git a/src/board/system76/galp3-c/pmc.c b/src/board/system76/galp3-c/pmc.c
index bfbf490..98f54a7 100644
--- a/src/board/system76/galp3-c/pmc.c
+++ b/src/board/system76/galp3-c/pmc.c
@@ -35,7 +35,7 @@ bool pmc_sci(struct Pmc * pmc, uint8_t sci) {
 
 void pmc_event(struct Pmc * pmc) {
     static enum PmcState state = PMC_STATE_DEFAULT;
-    static uint8_t state_data[2] = {0, 0};
+    static uint8_t state_data = 0;
 
     uint16_t burst_timeout;
     for (burst_timeout = 1; burst_timeout > 0; burst_timeout--) {
@@ -94,16 +94,16 @@ void pmc_event(struct Pmc * pmc) {
                 switch (state) {
                 case PMC_STATE_ACPI_READ:
                     state = PMC_STATE_DEFAULT;
-                    uint8_t value = acpi_read(data);
-                    pmc_write(pmc, value, PMC_TIMEOUT);
+                    state_data = acpi_read(data);
+                    pmc_write(pmc, state_data, PMC_TIMEOUT);
                     break;
                 case PMC_STATE_ACPI_WRITE:
                     state = PMC_STATE_ACPI_WRITE_ADDR;
-                    state_data[0] = data;
+                    state_data = data;
                     break;
                 case PMC_STATE_ACPI_WRITE_ADDR:
                     state = PMC_STATE_DEFAULT;
-                    acpi_write(state_data[0], data);
+                    acpi_write(state_data, data);
                     break;
                 default:
                     state = PMC_STATE_DEFAULT;