Add fan module and implement fan_max switch

src/board/system76/common/dgpu.c

@@ -4,8 +4,7 @@
 
 #if HAVE_DGPU
 
-#include <stdbool.h>
-
+#include <board/fan.h>
 #include <board/gpio.h>
 #include <board/power.h>
 #include <common/debug.h>
@@ -34,12 +33,6 @@ int16_t dgpu_temp = 0;
 uint8_t dgpu_duty = 0;
 
 #define DGPU_TEMP(X) ((int16_t)(X))
-#define PWM_DUTY(X) ((uint8_t)(((((uint16_t)(X)) * 255) + 99) / 100))
-
-struct FanPoint {
-    int16_t temp;
-    uint8_t duty;
-};
 
 #define FAN_POINT(T, D) { .temp = DGPU_TEMP(T), .duty = PWM_DUTY(D) }
 
@@ -154,6 +147,10 @@ void dgpu_event(void) {
 
     uint8_t heatup_duty = fan_heatup(dgpu_duty);
     uint8_t cooldown_duty = fan_cooldown(heatup_duty);
+    if (fan_max) {
+        // Override duty if fans are manually set to maximum
+        cooldown_duty = 0xFF;
+    }
     if (cooldown_duty != DCR4) {
         DCR4 = cooldown_duty;
         DEBUG("DGPU temp=%d = %d\n", dgpu_temp, cooldown_duty);

src/board/system76/common/fan.c

@@ -0,0 +1,8 @@
+#include <board/fan.h>
+
+bool fan_max = false;
+
+void fan_reset(void) {
+    // Do not manually set fans to maximum speed
+    fan_max = false;
+}

src/board/system76/common/include/board/fan.h

@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-3.0-only
+
+#ifndef _BOARD_FAN_H
+#define _BOARD_FAN_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+struct FanPoint {
+    int16_t temp;
+    uint8_t duty;
+};
+
+#define PWM_DUTY(X) ((uint8_t)(((((uint16_t)(X)) * 255) + 99) / 100))
+
+extern bool fan_max;
+
+void fan_reset(void);
+
+#endif // _BOARD_FAN_H

src/board/system76/common/peci.c

@@ -1,7 +1,6 @@
 // SPDX-License-Identifier: GPL-3.0-only
 
-#include <stdbool.h>
-
+#include <board/fan.h>
 #include <board/peci.h>
 #include <board/power.h>
 #include <common/debug.h>
@@ -34,12 +33,6 @@ int16_t peci_temp = 0;
 uint8_t peci_duty = 0;
 
 #define PECI_TEMP(X) (((int16_t)(X)) << 6)
-#define PWM_DUTY(X) ((uint8_t)(((((uint16_t)(X)) * 255) + 99) / 100))
-
-struct FanPoint {
-    int16_t temp;
-    uint8_t duty;
-};
 
 #define FAN_POINT(T, D) { .temp = PECI_TEMP(T), .duty = PWM_DUTY(D) }
 
@@ -237,6 +230,10 @@ void peci_event(void) {
 
     uint8_t heatup_duty = fan_heatup(peci_duty);
     uint8_t cooldown_duty = fan_cooldown(heatup_duty);
+    if (fan_max) {
+        // Override duty if fans are manually set to maximum
+        cooldown_duty = 0xFF;
+    }
     if (cooldown_duty != DCR2) {
         DCR2 = cooldown_duty;
         DEBUG("PECI offset=%d, temp=%d = %d\n", peci_offset, peci_temp, cooldown_duty);

src/board/system76/common/power.c

@@ -6,6 +6,7 @@
 #include <board/battery.h>
 #include <board/board.h>
 #include <board/config.h>
+#include <board/fan.h>
 #include <board/gpio.h>
 #include <board/kbled.h>
 #include <board/lid.h>
@@ -337,6 +338,8 @@ static void power_cpu_reset(void) {
     pnp_enable();
     // Reset ACPI registers
     acpi_reset();
+    // Reset fans
+    fan_reset();
     //TODO: reset KBC and touchpad states
     kbled_reset();
 }