sravan/system76-embedded-controller
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update Makefile name

Browse Source 
Debug settings were moved to `common.mk` during code reorganization.
`PARPORT` was renamed `PARALLEL`.
This commit is contained in:
Tim Crawford 2020-07-23 08:12:28 -06:00 committed by Jeremy Soller
parent 769064e1d6
commit e3686e025b
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
doc/debugging.md
View File

@ -38,7 +38,7 @@ make BOARD=arduino/mega2560 flash
### Setup ### Setup
1. Enable parallel port debugging in the EC firmware 1. Enable parallel port debugging in the EC firmware
- Uncomment `PARPORT_DEBUG` in `board.mk` - Uncomment `PARALLEL_DEBUG` in `src/board/system76/common/common.mk`
- Build and flash the firmware for the target - Build and flash the firmware for the target
2. Power off target 2. Power off target
3. Remove bottom panel 3. Remove bottom panel
@ -107,7 +107,7 @@ Requirements:
- USB-C cable - USB-C cable
1. Enable I2C debugging in the EC firmware for the target 1. Enable I2C debugging in the EC firmware for the target
- Uncomment `I2C_DEBUGGER` in `board.mk` - Uncomment `I2C_DEBUGGER` in `src/board/system76/common/common.mk`
- Build and flash firmware - Build and flash firmware
2. Connect Trinket M0 to host 2. Connect Trinket M0 to host
- This will create an ACM device at `/dev/ttyACM*` - This will create an ACM device at `/dev/ttyACM*`