sravan/system76-embedded-controller
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Refactor to minimize differences between galp3-c and lemp9 code

Browse Source
This commit is contained in:
Jeremy Soller
2020-01-15 15:54:43 -07:00
parent e2a38c7a88
commit efa9fb7fb4
27 changed files with 493 additions and 612 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
src/board/system76/galp3-c/gpio.c
View File

@@ -1,6 +1,42 @@
#include <board/gpio.h>
#include <common/debug.h>
struct Gpio __code ACIN_N = GPIO(B, 6);
struct Gpio __code AC_PRESENT = GPIO(E, 7);
struct Gpio __code ALL_SYS_PWRGD = GPIO(C, 0);
struct Gpio __code BKL_EN = GPIO(H, 2);
struct Gpio __code BT_EN = GPIO(F, 3);
struct Gpio __code BUF_PLT_RST_N = GPIO(D, 2);
struct Gpio __code CCD_EN = GPIO(G, 0);
struct Gpio __code DD_ON = GPIO(E, 4);
struct Gpio __code EC_EN = GPIO(E, 1);
struct Gpio __code EC_RSMRST_N = GPIO(E, 5);
struct Gpio __code LED_ACIN = GPIO(C, 7);
struct Gpio __code LED_BAT_CHG = GPIO(A, 5);
struct Gpio __code LED_BAT_FULL = GPIO(A, 6);
struct Gpio __code LED_PWR = GPIO(A, 7);
struct Gpio __code LID_SW_N = GPIO(D, 1);
struct Gpio __code PCH_DPWROK_EC = GPIO(A, 3);
struct Gpio __code PCH_PWROK_EC = GPIO(A, 4);
struct Gpio __code PM_CLKRUN_N = GPIO(H, 0);
struct Gpio __code PM_PWROK = GPIO(C, 6);
struct Gpio __code PWR_BTN_N = GPIO(D, 5);
struct Gpio __code PWR_SW_N = GPIO(D, 0);
struct Gpio __code SB_KBCRST_N = GPIO(E, 6);
struct Gpio __code SCI_N = GPIO(D, 4);
struct Gpio __code SLP_SUS_N = GPIO(I, 2);
struct Gpio __code SMI_N = GPIO(D, 3);
struct Gpio __code SUSB_N_PCH = GPIO(H, 6);
struct Gpio __code SUSC_N_PCH = GPIO(H, 1);
struct Gpio __code SUSWARN_N = GPIO(D, 7);
struct Gpio __code SUS_PWR_ACK = GPIO(J, 0);
struct Gpio __code SWI_N = GPIO(E, 0);
struct Gpio __code USB_PWR_EN_N = GPIO(F, 7);
struct Gpio __code VA_EC_EN = GPIO(E, 3);
struct Gpio __code VR_ON = GPIO(H, 4);
struct Gpio __code WLAN_EN = GPIO(H, 5);
struct Gpio __code WLAN_PWR_EN = GPIO(J, 4);
void gpio_init() {
// Enable LPC reset on GPD2
GCR = 0x04;