Disable edk2 debugging

models/galp3-b/coreboot.config

@@ -29,6 +29,7 @@ CONFIG_RELOCATABLE_RAMSTAGE=y
 CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM=y
 # CONFIG_UPDATE_IMAGE is not set
 # CONFIG_BOOTSPLASH_IMAGE is not set
+# CONFIG_RAMPAYLOAD is not set
 
 #
 # Mainboard
@@ -84,6 +85,7 @@ CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM=y
 CONFIG_VENDOR_SYSTEM76=y
 # CONFIG_VENDOR_TI is not set
 # CONFIG_VENDOR_TYAN is not set
+# CONFIG_VENDOR_UP is not set
 # CONFIG_VENDOR_VIA is not set
 CONFIG_BOARD_SPECIFIC_OPTIONS=y
 CONFIG_MAINBOARD_DIR="system76/kbl-u"
@@ -114,6 +116,9 @@ CONFIG_DCACHE_BSP_STACK_SIZE=0x4000
 CONFIG_MMCONF_BASE_ADDRESS=0xe0000000
 CONFIG_HAVE_INTEL_FIRMWARE=y
 # CONFIG_POST_DEVICE is not set
+CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
+# CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS is not set
+CONFIG_TPM_INIT=y
 # CONFIG_DRIVERS_UART_8250IO is not set
 # CONFIG_VBOOT is not set
 CONFIG_DIMM_MAX=2
@@ -149,6 +154,8 @@ CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1413
 CONFIG_CONSOLE_POST=y
 CONFIG_PXE_ROM_ID="10ec,8168"
 CONFIG_FSP_M_XIP=y
+CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
+CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
 CONFIG_BOARD_ROMSIZE_KB_8192=y
 # CONFIG_COREBOOT_ROMSIZE_KB_64 is not set
 # CONFIG_COREBOOT_ROMSIZE_KB_128 is not set
@@ -205,7 +212,6 @@ CONFIG_FSP_HEADER_PATH="3rdparty/fsp/KabylakeFspBinPkg/Include/"
 CONFIG_FSP_FD_PATH="3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd"
 # CONFIG_NHLT_MAX98357 is not set
 # CONFIG_NHLT_DA7219 is not set
-# CONFIG_SPI_FLASH_INCLUDE_ALL_DRIVERS is not set
 CONFIG_IFD_CHIPSET="sklkbl"
 CONFIG_CPU_BCLK_MHZ=100
 CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL=0x30
@@ -290,6 +296,7 @@ CONFIG_PMC_GLOBAL_RESET_ENABLE_LOCK=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_RTC=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_SATA=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_SCS=y
+# CONFIG_SOC_INTEL_COMMON_EARLY_MMC_WAKE is not set
 CONFIG_SOC_INTEL_COMMON_BLOCK_SGX=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS=y
 CONFIG_SOC_INTEL_COMMON_BLOCK_TCO=y
@@ -332,7 +339,7 @@ CONFIG_SOC_INTEL_COMMON_NHLT=y
 # CONFIG_SOC_MEDIATEK_MT8183 is not set
 # CONFIG_SOC_NVIDIA_TEGRA124 is not set
 # CONFIG_SOC_NVIDIA_TEGRA210 is not set
-# CONFIG_QC_SDI_ENABLE is not set
+# CONFIG_SOC_QUALCOMM_COMMON is not set
 # CONFIG_SOC_QC_IPQ40XX is not set
 # CONFIG_SOC_QC_IPQ806X is not set
 # CONFIG_SOC_QUALCOMM_QCS405 is not set
@@ -378,7 +385,6 @@ CONFIG_SMM_STUB_STACK_SIZE=0x400
 # CONFIG_SMM_LAPIC_REMAP_MITIGATION is not set
 # CONFIG_SERIALIZED_SMM_INITIALIZATION is not set
 # CONFIG_X86_AMD_FIXED_MTRRS is not set
-# CONFIG_PLATFORM_USES_FSP1_0 is not set
 # CONFIG_MIRROR_PAYLOAD_TO_RAM_BEFORE_LOADING is not set
 # CONFIG_SOC_SETS_MSRS is not set
 CONFIG_CACHE_AS_RAM=y
@@ -420,6 +426,8 @@ CONFIG_INTEL_DESCRIPTOR_MODE_REQUIRED=y
 #
 # Super I/O
 #
+# CONFIG_SUPERIO_ASPEED_AST2400 is not set
+# CONFIG_SUPERIO_ASPEED_COMMON_PRE_RAM is not set
 # CONFIG_SUPERIO_NUVOTON_NCT6776_COM_A is not set
 
 #
@@ -497,7 +505,7 @@ CONFIG_UDK_VERSION=2015
 # CONFIG_ARCH_ROMSTAGE_PPC64 is not set
 # CONFIG_ARCH_RAMSTAGE_PPC64 is not set
 # CONFIG_ARCH_RISCV is not set
-CONFIG_ARCH_RISCV_M=y
+# CONFIG_ARCH_RISCV_M is not set
 # CONFIG_ARCH_RISCV_S is not set
 # CONFIG_ARCH_RISCV_U is not set
 # CONFIG_ARCH_RISCV_RV64 is not set
@@ -576,8 +584,6 @@ CONFIG_CARDBUS_PLUGIN_SUPPORT=y
 # CONFIG_AZALIA_PLUGIN_SUPPORT is not set
 CONFIG_PCIEXP_PLUGIN_SUPPORT=y
 # CONFIG_EARLY_PCI_BRIDGE is not set
-CONFIG_SUBSYSTEM_VENDOR_ID=0x0000
-CONFIG_SUBSYSTEM_DEVICE_ID=0x0000
 CONFIG_INTEL_GMA_HAVE_VBT=y
 CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_SOFTWARE_I2C is not set
@@ -591,7 +597,6 @@ CONFIG_INTEL_GMA_ADD_VBT=y
 # CONFIG_IPMI_KCS is not set
 # CONFIG_DRIVERS_LENOVO_WACOM is not set
 CONFIG_CACHE_MRC_SETTINGS=y
-CONFIG_MRC_SETTINGS_CACHE_SIZE=0x10000
 CONFIG_MRC_SETTINGS_PROTECT=y
 # CONFIG_HAS_RECOVERY_MRC_CACHE is not set
 # CONFIG_MRC_CLEAR_NORMAL_CACHE_ON_RECOVERY_RETRAIN is not set
@@ -612,7 +617,6 @@ CONFIG_SPI_FLASH_SMM=y
 # CONFIG_SPI_FLASH_FAST_READ_DUAL_OUTPUT_3B is not set
 # CONFIG_SPI_FLASH_HAS_VOLATILE_GROUP is not set
 # CONFIG_HAVE_SPI_CONSOLE_SUPPORT is not set
-CONFIG_TPM_INIT=y
 CONFIG_NO_UART_ON_SUPERIO=y
 # CONFIG_UART_OVERRIDE_INPUT_CLOCK_DIVIDER is not set
 # CONFIG_UART_OVERRIDE_REFCLK is not set
@@ -640,6 +644,7 @@ CONFIG_DRIVERS_I2C_DESIGNWARE=y
 # CONFIG_MAINBOARD_HAS_I2C_TPM_ATMEL is not set
 # CONFIG_MAINBOARD_HAS_I2C_TPM_CR50 is not set
 # CONFIG_MAINBOARD_HAS_I2C_TPM_GENERIC is not set
+# CONFIG_PLATFORM_USES_FSP1_0 is not set
 CONFIG_FSP_USE_REPO=y
 # CONFIG_DISPLAY_HOBS is not set
 # CONFIG_DISPLAY_UPD_DATA is not set
@@ -826,6 +831,7 @@ CONFIG_HAVE_DEBUG_GPIO=y
 CONFIG_HAVE_EM100_SUPPORT=y
 # CONFIG_EM100 is not set
 CONFIG_NO_EDID_FILL_FB=y
+CONFIG_SPD_READ_BY_WORD=y
 # CONFIG_ENABLE_APIC_EXT_ID is not set
 CONFIG_WARNINGS_ARE_ERRORS=y
 # CONFIG_POWER_BUTTON_DEFAULT_ENABLE is not set
@@ -838,5 +844,4 @@ CONFIG_REG_SCRIPT=y
 # CONFIG_EARLY_CBMEM_LIST is not set
 CONFIG_RELOCATABLE_MODULES=y
 CONFIG_GENERIC_GPIO_LIB=y
-CONFIG_SPD_READ_BY_WORD=y
 CONFIG_C_ENVIRONMENT_BOOTBLOCK=y

scripts/_build/edk2.sh

@@ -9,7 +9,7 @@ then
 fi
 UEFIPAYLOAD="$(realpath "$1")"
 
-BUILD_TYPE=DEBUG
+BUILD_TYPE=RELEASE
 TOOLCHAIN=GCC5
 
 pushd edk2 >/dev/null

scripts/build.sh

@@ -39,7 +39,6 @@ FIRMWARE_OPEN_VBT="${MODEL_DIR}/vbt.rom" \
 PACKAGES_PATH="${MODEL_DIR}:$(realpath edk2-platforms):$(realpath apps)" \
     ./scripts/_build/edk2.sh \
         "${UEFIPAYLOAD}" \
-        -D SOURCE_DEBUG_ENABLE=TRUE \
         -D USE_HPET_TIMER=TRUE \
         -D FIRMWARE_OPEN_FIRMWARE_SETUP="firmware-setup/firmware-setup.inf" \
         -D FIRMWARE_OPEN_GOP_POLICY="gop-policy/gop-policy.inf" \