From de7fa7cb161231b1bfd9bf3446e3e3d1285bdafb Mon Sep 17 00:00:00 2001 From: Jeremy Soller Date: Tue, 29 Dec 2020 10:56:38 -0700 Subject: [PATCH] Add darp7, galp5, and lemp10 --- models/README.md | 3 + models/darp7/FSP/Fsp_M.fd | 3 + models/darp7/FSP/Fsp_S.fd | 3 + models/darp7/FSP/Fsp_T.fd | 3 + .../FSP/Include/FirmwareVersionInfoHob.h | 69 + models/darp7/FSP/Include/FspInfoHob.h | 56 + models/darp7/FSP/Include/FspUpd.h | 48 + models/darp7/FSP/Include/FspmUpd.h | 3574 ++++++++++++++ models/darp7/FSP/Include/FspsUpd.h | 4201 +++++++++++++++++ models/darp7/FSP/Include/FsptUpd.h | 311 ++ models/darp7/FSP/Include/FusaInfoHob.h | 161 + models/darp7/FSP/Include/GpioConfig.h | 356 ++ models/darp7/FSP/Include/GpioSampleDef.h | 382 ++ models/darp7/FSP/Include/MemInfoHob.h | 286 ++ models/darp7/FSP/LICENSE | 46 + models/darp7/IntelGopDriver.efi | 3 + models/darp7/IntelGopDriver.inf | 9 + models/darp7/README.md | 12 + models/darp7/README.md.in | 1 + models/darp7/coreboot-collector.txt | 256 + models/darp7/coreboot.config | 29 + models/darp7/ec.config | 1 + models/darp7/ecspy.txt | 89 + models/darp7/edk2.config | 2 + models/darp7/fd.rom | 3 + models/darp7/gpio.h | 213 + models/darp7/hda_verb.c | 40 + models/darp7/me.rom | 3 + models/darp7/microcode.rom | 3 + models/darp7/vbt.rom | 3 + models/galp5/FSP/Fsp_M.fd | 3 + models/galp5/FSP/Fsp_S.fd | 3 + models/galp5/FSP/Fsp_T.fd | 3 + .../FSP/Include/FirmwareVersionInfoHob.h | 69 + models/galp5/FSP/Include/FspInfoHob.h | 56 + models/galp5/FSP/Include/FspUpd.h | 48 + models/galp5/FSP/Include/FspmUpd.h | 3574 ++++++++++++++ models/galp5/FSP/Include/FspsUpd.h | 4201 +++++++++++++++++ models/galp5/FSP/Include/FsptUpd.h | 311 ++ models/galp5/FSP/Include/FusaInfoHob.h | 161 + models/galp5/FSP/Include/GpioConfig.h | 356 ++ models/galp5/FSP/Include/GpioSampleDef.h | 382 ++ models/galp5/FSP/Include/MemInfoHob.h | 286 ++ models/galp5/FSP/LICENSE | 46 + models/galp5/IntelGopDriver.efi | 3 + models/galp5/IntelGopDriver.inf | 9 + models/galp5/README.md | 12 + models/galp5/README.md.in | 1 + models/galp5/chip.txt | 1 + models/galp5/coreboot-collector.txt | 257 + models/galp5/coreboot.config | 29 + models/galp5/ec.config | 1 + models/galp5/ecspy.txt | 81 + models/galp5/edk2.config | 2 + models/galp5/fd.rom | 3 + models/galp5/gpio.h | 213 + models/galp5/hda_verb.c | 40 + models/galp5/me.rom | 3 + models/galp5/microcode.rom | 3 + models/galp5/usb4-pd.rom | 3 + models/galp5/usb4-retimer.rom | 3 + models/galp5/vbt.rom | 3 + models/lemp10/FSP/Fsp_M.fd | 3 + models/lemp10/FSP/Fsp_S.fd | 3 + models/lemp10/FSP/Fsp_T.fd | 3 + .../FSP/Include/FirmwareVersionInfoHob.h | 69 + models/lemp10/FSP/Include/FspInfoHob.h | 56 + models/lemp10/FSP/Include/FspUpd.h | 48 + models/lemp10/FSP/Include/FspmUpd.h | 3574 ++++++++++++++ models/lemp10/FSP/Include/FspsUpd.h | 4201 +++++++++++++++++ models/lemp10/FSP/Include/FsptUpd.h | 311 ++ models/lemp10/FSP/Include/FusaInfoHob.h | 161 + models/lemp10/FSP/Include/GpioConfig.h | 356 ++ models/lemp10/FSP/Include/GpioSampleDef.h | 382 ++ models/lemp10/FSP/Include/MemInfoHob.h | 286 ++ models/lemp10/FSP/LICENSE | 46 + models/lemp10/IntelGopDriver.efi | 3 + models/lemp10/IntelGopDriver.inf | 9 + models/lemp10/README.md | 12 + models/lemp10/README.md.in | 1 + models/lemp10/chip.txt | 1 + models/lemp10/coreboot-collector.txt | 255 + models/lemp10/coreboot.config | 29 + models/lemp10/ec.config | 1 + models/lemp10/ecspy.txt | 89 + models/lemp10/edk2.config | 2 + models/lemp10/fd.rom | 3 + models/lemp10/gpio.h | 213 + models/lemp10/hda_verb.c | 40 + models/lemp10/me.rom | 3 + models/lemp10/microcode.rom | 3 + models/lemp10/usb4-pd.rom | 3 + models/lemp10/usb4-retimer.rom | 3 + models/lemp10/vbt.rom | 3 + 94 files changed, 30507 insertions(+) create mode 100644 models/darp7/FSP/Fsp_M.fd create mode 100644 models/darp7/FSP/Fsp_S.fd create mode 100644 models/darp7/FSP/Fsp_T.fd create mode 100644 models/darp7/FSP/Include/FirmwareVersionInfoHob.h create mode 100644 models/darp7/FSP/Include/FspInfoHob.h create mode 100644 models/darp7/FSP/Include/FspUpd.h create mode 100644 models/darp7/FSP/Include/FspmUpd.h create mode 100644 models/darp7/FSP/Include/FspsUpd.h create mode 100644 models/darp7/FSP/Include/FsptUpd.h create mode 100644 models/darp7/FSP/Include/FusaInfoHob.h create mode 100644 models/darp7/FSP/Include/GpioConfig.h create mode 100644 models/darp7/FSP/Include/GpioSampleDef.h create mode 100644 models/darp7/FSP/Include/MemInfoHob.h create mode 100644 models/darp7/FSP/LICENSE create mode 100644 models/darp7/IntelGopDriver.efi create mode 100644 models/darp7/IntelGopDriver.inf create mode 100644 models/darp7/README.md create mode 100644 models/darp7/README.md.in create mode 100644 models/darp7/coreboot-collector.txt create mode 100644 models/darp7/coreboot.config create mode 100644 models/darp7/ec.config create mode 100644 models/darp7/ecspy.txt create mode 100644 models/darp7/edk2.config create mode 100644 models/darp7/fd.rom create mode 100644 models/darp7/gpio.h create mode 100644 models/darp7/hda_verb.c create mode 100644 models/darp7/me.rom create mode 100644 models/darp7/microcode.rom create mode 100644 models/darp7/vbt.rom create mode 100644 models/galp5/FSP/Fsp_M.fd create mode 100644 models/galp5/FSP/Fsp_S.fd create mode 100644 models/galp5/FSP/Fsp_T.fd create mode 100644 models/galp5/FSP/Include/FirmwareVersionInfoHob.h create mode 100644 models/galp5/FSP/Include/FspInfoHob.h create mode 100644 models/galp5/FSP/Include/FspUpd.h create mode 100644 models/galp5/FSP/Include/FspmUpd.h create mode 100644 models/galp5/FSP/Include/FspsUpd.h create mode 100644 models/galp5/FSP/Include/FsptUpd.h create mode 100644 models/galp5/FSP/Include/FusaInfoHob.h create mode 100644 models/galp5/FSP/Include/GpioConfig.h create mode 100644 models/galp5/FSP/Include/GpioSampleDef.h create mode 100644 models/galp5/FSP/Include/MemInfoHob.h create mode 100644 models/galp5/FSP/LICENSE create mode 100644 models/galp5/IntelGopDriver.efi create mode 100644 models/galp5/IntelGopDriver.inf create mode 100644 models/galp5/README.md create mode 100644 models/galp5/README.md.in create mode 100644 models/galp5/chip.txt create mode 100644 models/galp5/coreboot-collector.txt create mode 100644 models/galp5/coreboot.config create mode 100644 models/galp5/ec.config create mode 100644 models/galp5/ecspy.txt create mode 100644 models/galp5/edk2.config create mode 100644 models/galp5/fd.rom create mode 100644 models/galp5/gpio.h create mode 100644 models/galp5/hda_verb.c create mode 100644 models/galp5/me.rom create mode 100644 models/galp5/microcode.rom create mode 100644 models/galp5/usb4-pd.rom create mode 100644 models/galp5/usb4-retimer.rom create mode 100644 models/galp5/vbt.rom create mode 100644 models/lemp10/FSP/Fsp_M.fd create mode 100644 models/lemp10/FSP/Fsp_S.fd create mode 100644 models/lemp10/FSP/Fsp_T.fd create mode 100644 models/lemp10/FSP/Include/FirmwareVersionInfoHob.h create mode 100644 models/lemp10/FSP/Include/FspInfoHob.h create mode 100644 models/lemp10/FSP/Include/FspUpd.h create mode 100644 models/lemp10/FSP/Include/FspmUpd.h create mode 100644 models/lemp10/FSP/Include/FspsUpd.h create mode 100644 models/lemp10/FSP/Include/FsptUpd.h create mode 100644 models/lemp10/FSP/Include/FusaInfoHob.h create mode 100644 models/lemp10/FSP/Include/GpioConfig.h create mode 100644 models/lemp10/FSP/Include/GpioSampleDef.h create mode 100644 models/lemp10/FSP/Include/MemInfoHob.h create mode 100644 models/lemp10/FSP/LICENSE create mode 100644 models/lemp10/IntelGopDriver.efi create mode 100644 models/lemp10/IntelGopDriver.inf create mode 100644 models/lemp10/README.md create mode 100644 models/lemp10/README.md.in create mode 100644 models/lemp10/chip.txt create mode 100644 models/lemp10/coreboot-collector.txt create mode 100644 models/lemp10/coreboot.config create mode 100644 models/lemp10/ec.config create mode 100644 models/lemp10/ecspy.txt create mode 100644 models/lemp10/edk2.config create mode 100644 models/lemp10/fd.rom create mode 100644 models/lemp10/gpio.h create mode 100644 models/lemp10/hda_verb.c create mode 100644 models/lemp10/me.rom create mode 100644 models/lemp10/microcode.rom create mode 100644 models/lemp10/usb4-pd.rom create mode 100644 models/lemp10/usb4-retimer.rom create mode 100644 models/lemp10/vbt.rom diff --git a/models/README.md b/models/README.md index 1e53dff..afa66b1 100644 --- a/models/README.md +++ b/models/README.md @@ -7,16 +7,19 @@ - [bonw14](./bonw14) - System76 Bonobo WS (bonw14) - [darp5](./darp5) - System76 Darter Pro (darp5) - [darp6](./darp6) - System76 Darter Pro (darp6) +- [darp7](./darp7) - System76 Darter Pro (darp7) - [galp2](./galp2) - System76 Galago Pro (galp2) - [galp3](./galp3) - System76 Galago Pro (galp3) - [galp3-b](./galp3-b) - System76 Galago Pro (galp3-b) - [galp3-c](./galp3-c) - System76 Galago Pro (galp3-c) - [galp4](./galp4) - System76 Galago Pro (galp4) +- [galp5](./galp5) - System76 Galago Pro (galp5) - [gaze14_1650_15](./gaze14_1650_15) - System76 Gazelle (gaze14) - [gaze14_1650_17](./gaze14_1650_17) - System76 Gazelle (gaze14) - [gaze14_1660ti_15](./gaze14_1660ti_15) - System76 Gazelle (gaze14) - [gaze14_1660ti_17](./gaze14_1660ti_17) - System76 Gazelle (gaze14) - [gaze15](./gaze15) - System76 Gazelle (gaze15) +- [lemp10](./lemp10) - System76 Lemur Pro (lemp10) - [lemp9](./lemp9) - System76 Lemur Pro (lemp9) - [oryp5](./oryp5) - System76 Oryx Pro (oryp5) - [oryp6](./oryp6) - System76 Oryx Pro (oryp6) diff --git a/models/darp7/FSP/Fsp_M.fd b/models/darp7/FSP/Fsp_M.fd new file mode 100644 index 0000000..2a65483 --- /dev/null +++ b/models/darp7/FSP/Fsp_M.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23305ad95f1d05d58ca6719df91b44ebf874702f9d572d4b2614c0b13009c866 +size 651264 diff --git a/models/darp7/FSP/Fsp_S.fd b/models/darp7/FSP/Fsp_S.fd new file mode 100644 index 0000000..108a145 --- /dev/null +++ b/models/darp7/FSP/Fsp_S.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c43ec298a13c0c5658ca299adfe6c803d309ae4602ec2fbc8d6fbc7ecf459f5d +size 368640 diff --git a/models/darp7/FSP/Fsp_T.fd b/models/darp7/FSP/Fsp_T.fd new file mode 100644 index 0000000..6dcc56a --- /dev/null +++ b/models/darp7/FSP/Fsp_T.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52b36311001a3f2b2c5731c7246f23a9806f983913b4cff916c216fcd3efa2c5 +size 28672 diff --git a/models/darp7/FSP/Include/FirmwareVersionInfoHob.h b/models/darp7/FSP/Include/FirmwareVersionInfoHob.h new file mode 100644 index 0000000..54543d4 --- /dev/null +++ b/models/darp7/FSP/Include/FirmwareVersionInfoHob.h @@ -0,0 +1,69 @@ +/** @file + Header file for Firmware Version Information + + @copyright + INTEL CONFIDENTIAL + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.
+ + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include +#include +#include + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/models/darp7/FSP/Include/FspInfoHob.h b/models/darp7/FSP/Include/FspInfoHob.h new file mode 100644 index 0000000..bc82ddf --- /dev/null +++ b/models/darp7/FSP/Include/FspInfoHob.h @@ -0,0 +1,56 @@ +/** @file + Header file for FSP Information HOB. + +@copyright + INTEL CONFIDENTIAL + Copyright 2017 - 2019 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ + +#ifndef _FSP_INFO_HOB_H_ +#define _FSP_INFO_HOB_H_ + +extern EFI_GUID gFspInfoGuid; + +#pragma pack (push, 1) + +typedef struct { +UINT8 SiliconInitVersionMajor; +UINT8 SiliconInitVersionMinor; +UINT8 SiliconInitVersionRevision; +UINT8 SiliconInitVersionBuild; +UINT8 FspVersionRevision; +UINT8 FspVersionBuild; +UINT8 TimeStamp [12]; +UINT8 FspVersionMinor; +} FSP_INFO_HOB; + +#pragma pack (pop) + +#endif // _FSP_INFO_HOB_H_ diff --git a/models/darp7/FSP/Include/FspUpd.h b/models/darp7/FSP/Include/FspUpd.h new file mode 100644 index 0000000..8315336 --- /dev/null +++ b/models/darp7/FSP/Include/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C4754 /* 'TGLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4754 /* 'TGLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C4754 /* 'TGLUPD_S' */ + +#pragma pack() + +#endif diff --git a/models/darp7/FSP/Include/FspmUpd.h b/models/darp7/FSP/Include/FspmUpd.h new file mode 100644 index 0000000..8d2db72 --- /dev/null +++ b/models/darp7/FSP/Include/FspmUpd.h @@ -0,0 +1,3574 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include + +#pragma pack(1) + + +#include + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x004A - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x004B - Enable/Disable CrashLog Device 10 + Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog + $EN_DIS +**/ + UINT8 CpuCrashLogDevice; + +/** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr00] +**/ + UINT32 MemorySpdPtr000; + +/** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr01] +**/ + UINT32 MemorySpdPtr001; + +/** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr02] +**/ + UINT32 MemorySpdPtr010; + +/** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr03] +**/ + UINT32 MemorySpdPtr011; + +/** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr04] +**/ + UINT32 MemorySpdPtr020; + +/** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr05] +**/ + UINT32 MemorySpdPtr021; + +/** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr06] +**/ + UINT32 MemorySpdPtr030; + +/** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr07] +**/ + UINT32 MemorySpdPtr031; + +/** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr08] +**/ + UINT32 MemorySpdPtr100; + +/** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr09] +**/ + UINT32 MemorySpdPtr101; + +/** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr10] +**/ + UINT32 MemorySpdPtr110; + +/** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr11] +**/ + UINT32 MemorySpdPtr111; + +/** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr12] +**/ + UINT32 MemorySpdPtr120; + +/** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr13] +**/ + UINT32 MemorySpdPtr121; + +/** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr14] +**/ + UINT32 MemorySpdPtr130; + +/** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr15] +**/ + UINT32 MemorySpdPtr131; + +/** Offset 0x008C - RcompResistor settings + Indicates RcompResistor settings: Board-dependent +**/ + UINT16 RcompResistor; + +/** Offset 0x008E - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh0] +**/ + UINT8 DqsMapCpu2DramMc0Ch0[2]; + +/** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh1] +**/ + UINT8 DqsMapCpu2DramMc0Ch1[2]; + +/** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh2] +**/ + UINT8 DqsMapCpu2DramMc0Ch2[2]; + +/** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh3] +**/ + UINT8 DqsMapCpu2DramMc0Ch3[2]; + +/** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh4] +**/ + UINT8 DqsMapCpu2DramMc1Ch0[2]; + +/** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh5] +**/ + UINT8 DqsMapCpu2DramMc1Ch1[2]; + +/** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh6] +**/ + UINT8 DqsMapCpu2DramMc1Ch2[2]; + +/** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh7] +**/ + UINT8 DqsMapCpu2DramMc1Ch3[2]; + +/** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh0] +**/ + UINT8 DqMapCpu2DramMc0Ch0[16]; + +/** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh1] +**/ + UINT8 DqMapCpu2DramMc0Ch1[16]; + +/** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh2] +**/ + UINT8 DqMapCpu2DramMc0Ch2[16]; + +/** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh3] +**/ + UINT8 DqMapCpu2DramMc0Ch3[16]; + +/** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh4] +**/ + UINT8 DqMapCpu2DramMc1Ch0[16]; + +/** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh5] +**/ + UINT8 DqMapCpu2DramMc1Ch1[16]; + +/** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh6] +**/ + UINT8 DqMapCpu2DramMc1Ch2[16]; + +/** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh7] +**/ + UINT8 DqMapCpu2DramMc1Ch3[16]; + +/** Offset 0x0128 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0129 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x012A - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x012B - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x012C - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x012D +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0130 - Intel Enhanced Debug + @deprecated - Not used and has no effect + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x0134 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x0138 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x013A - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x013B - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x013C - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[16]; + +/** Offset 0x014C - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options.\Manual: Do not use Platform Debug Consent to override other debug-relevant + policies, but the user must set each debug option manually, aimed at advanced users.\n + Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting. + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x014D - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x014E - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x014F - Enable DCI ModPHY Power Gate + Enable ModPHY Power Gate when DCI is enabled + $EN_DIS +**/ + UINT8 DciModphyPg; + +/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x0151 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x0154 - HD Audio DMIC Link Clock Select + Determines DMIC Clock Source. 0: Both, 1: ClkA, 2: ClkB + 0: Both, 1: ClkA, 2: ClkB +**/ + UINT8 PchHdaAudioLinkDmicClockSelect[2]; + +/** Offset 0x0156 - PchPreMemRsvd + Reserved for PCH Pre-Mem Reserved + $EN_DIS +**/ + UINT8 PchPreMemRsvd[5]; + +/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x015D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0160 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x0184 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x0185 - Vtd Programming for Igd + 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIgdEnable; + +/** Offset 0x0186 - Vtd Programming for Ipu + 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIpuEnable; + +/** Offset 0x0187 - Vtd Programming for Iop + 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIopEnable; + +/** Offset 0x0188 - Vtd Programming for ITbt + 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdItbtEnable; + +/** Offset 0x0189 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, + 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, + 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x018A - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x018B - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x018C - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x018D +**/ + UINT8 UnusedUpdSpace2; + +/** Offset 0x018E - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x0190 - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at three different frequencies. + 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x0191 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0192 - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x0193 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x0194 - Controller 0 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh0] +**/ + UINT8 DisableDimmMc0Ch0; + +/** Offset 0x0195 - Controller 0 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh1] +**/ + UINT8 DisableDimmMc0Ch1; + +/** Offset 0x0196 - Controller 0 Channel 2 DIMM Control + Controller 0 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh2] +**/ + UINT8 DisableDimmMc0Ch2; + +/** Offset 0x0197 - Controller 0 Channel 3 DIMM Control + Controller 0 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh3] +**/ + UINT8 DisableDimmMc0Ch3; + +/** Offset 0x0198 - Controller 1 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh4] +**/ + UINT8 DisableDimmMc1Ch0; + +/** Offset 0x0199 - Controller 1 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh5] +**/ + UINT8 DisableDimmMc1Ch1; + +/** Offset 0x019A - Controller 1 Channel 2 DIMM Control + Controller 1 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh6] +**/ + UINT8 DisableDimmMc1Ch2; + +/** Offset 0x019B - Controller 1 Channel 3 DIMM Control + Controller 1 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh7] +**/ + UINT8 DisableDimmMc1Ch3; + +/** Offset 0x019C - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x019D - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x019E - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x019F +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x01A0 - Memory Voltage + DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM + chips) in millivolts. 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x01A2 - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x01A3 - tCL + CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCL; + +/** Offset 0x01A4 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCWL; + +/** Offset 0x01A5 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01A6 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tFAW; + +/** Offset 0x01A8 - tRAS + RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRAS; + +/** Offset 0x01AA - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT8 tRCDtRP; + +/** Offset 0x01AB +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x01AC - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tREFI; + +/** Offset 0x01AE - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRFC; + +/** Offset 0x01B0 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRRD; + +/** Offset 0x01B1 - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRTP; + +/** Offset 0x01B2 - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x01B3 - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tWTR; + +/** Offset 0x01B4 - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x01B5 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x01B6 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x01B7 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x01B8 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x01B9 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x01BA - SAGV Gear Ratio + Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 SaGvGear[4]; + +/** Offset 0x01BE - SAGV Frequency + SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. +**/ + UINT16 SaGvFreq[4]; + +/** Offset 0x01C6 - SAGV Disabled Gear Ratio + Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 GearRatio; + +/** Offset 0x01C7 - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x01C8 - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x01CC - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x01D0 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x01D4 - HG dGPU Power Delay + HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 HgDelayAfterPwrEn; + +/** Offset 0x01D6 - HG dGPU Reset Delay + HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 HgDelayAfterHoldReset; + +/** Offset 0x01D8 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x01DB - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x01DC - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x01DD +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x01E0 - Temporary MMIO address for GMADR + Obsolete field now and it has been extended to 64 bit address, used GmAdr64 +**/ + UINT32 GmAdr; + +/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x01E8 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x01EA +**/ + UINT8 UnusedUpdSpace7[2]; + +/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0 + Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie0Rtd3Gpio[24]; + +/** Offset 0x024C - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x024D - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x024E - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x024F - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x0250 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x0254 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x0256 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x0259 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x025A - iTBT PCIe Multiple Segment setting + When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the + TBT PCIe RP are located at Segment1. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PcieMultipleSegmentEnabled; + +/** Offset 0x025B - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x025C - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x025D - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;1: Enable. + $EN_DIS +**/ + UINT8 ImguClkOutEn[6]; + +/** Offset 0x0263 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x0264 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 CpuPcieRpEnableMask; + +/** Offset 0x0268 - Assertion on Link Down GPIOs + GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down + GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpLinkDownGpios; + +/** Offset 0x0269 - Enable ClockReq Messaging + ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default): + Enable ClockReq Messaging [ALIAS_NAME RpClockReqMsgEnable] + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpClockReqMsgEnable; + +/** Offset 0x026A - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; + 4: Gen4 (see: CPU_PCIE_SPEED). [ALIAS_NAME RpPcieThresholdBytes] +**/ + UINT8 CpuPcieRpPcieSpeed[4]; + +/** Offset 0x026E - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x026F - Selection of DiSM Region Size + DiSM Size to be allocated for 2LM Sku Default is 0 + 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB +**/ + UINT8 DismSize; + +/** Offset 0x0270 - Enable Display memory map programming for DFD Restore + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DfdRestoreEnable; + +/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0272 - Program GPIOs for LFP on DDI port-B device + 0(Default)=Disabled,1=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortBConfig; + +/** Offset 0x0273 - Enable or disable HPD of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortAHpd; + +/** Offset 0x0274 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0275 - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0276 - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x0277 - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x0278 - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x0279 - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x027A - Enable or disable DDC of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortADdc; + +/** Offset 0x027B - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x027C - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x027D - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x027E - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x027F - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0280 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0281 - Enable Gt CLOS + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 GtClosEnable; + +/** Offset 0x0282 +**/ + UINT8 UnusedUpdSpace9[6]; + +/** Offset 0x0288 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB) +**/ + UINT64 GmAdr64; + +/** Offset 0x0290 - Hybrid Graphics Slot Selection + PEG or PCH Slot Selection for Hybrid Graphics +**/ + UINT8 HgSlot; + +/** Offset 0x0291 - DMI ASPM Configuration:{Combo + Set ASPM Configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspm; + +/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo + Set ASPM Control configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspmCtrl; + +/** Offset 0x0293 - DMI ASPM L1 exit Latency + Range: 0-7, 4 is default L1 exit Latency +**/ + UINT8 DmiAspmL1ExitLatency; + +/** Offset 0x0294 - Per-core HT Disable + Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, + 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value + of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have + HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. +**/ + UINT16 PerCoreHtDisable; + +/** Offset 0x0296 - DEKEL CDR Relock + Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable +**/ + UINT8 CpuPcieRpCdrRelock[4]; + +/** Offset 0x029A - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[96]; + +/** Offset 0x02FA - DMI Max Link Speed + Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): + Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x02FB - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x02FC - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x02FE - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x02FF - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0307 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x030F - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x031B - BIST on Reset + Enable or Disable BIST on Reset; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x031D - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- 1: Allocate PRMRR memory for C6DRAM power gating feature. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x031E - Over clocking support + Over clocking support; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x031F - Over clocking Lock + Over clocking Lock Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0320 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0321 - Core voltage mode + Core voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0322 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0323 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x0324 - Enable or Disable CPU Ratio Override + Enable or Disable CPU Ratio Override; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuRatioOverride; + +/** Offset 0x0325 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x0326 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. + 1: Maximum non-turbo performance. 2: Turbo performance + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x0327 - Number of active cores + Number of active cores(Depends on Number of cores). 0: All;1: 1 ;2: + 2 ;3: 3 + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting + 0: 800 MHz (ULT/ULX). 1: 1 GHz (DT/Halo). Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x0329 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x032A - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x032B - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x032C - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x032D - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. 0: + Disable; 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x032E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0330 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0332 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0334 - Core PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0335 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0336 - Ring voltage mode + Ring voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0337 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0338 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x033A - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x033C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x033E - Enable or Disable TME + Enable or Disable TME; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x033F - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x0340 - ElixirSpringsPatchAddr + DEPRECATED +**/ + UINT32 ElixirSpringsPatchAddr; + +/** Offset 0x0344 - ElixirSpringsPatchSize + DEPRECATED +**/ + UINT32 ElixirSpringsPatchSize; + +/** Offset 0x0348 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; 2: + No Change + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0349 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x034A - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x034B +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x034C - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x034D - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x034E +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0350 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0354 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0358 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0360 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0364 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0368 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x036C - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0370 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x0374 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0378 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0380 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0388 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0389 - Configuration for boot TDP selection + Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x038A - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[5]; + +/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x03D7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x03EF - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x0407 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x041F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0437 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x044F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0467 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x047F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0497 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x04AF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x04C7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x04DF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x04E7 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x04EF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x04F7 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x04FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x0507 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x050F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x0517 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x051F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0527 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x052F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0537 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x053F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0547 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x054F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0557 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x055F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0567 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0570 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + 0:LPC, 1:PCI +**/ + UINT8 PchPort80Route; + +/** Offset 0x0571 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0572 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0573 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x0574 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0576 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0577 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x0587 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x0597 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0598 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x059C - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x05A0 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x05A1 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x05A3 +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x05A4 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x05A8 - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x05AA - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x05AB +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x05AC - Serial Io Uart Debug Mmio Base + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 SerialIoUartDebugMmioBase; + +/** Offset 0x05B0 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x05B1 - GT PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x05B2 - Ring PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x05B3 - System Agent PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x05B4 - Memory Controller PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x05B5 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x05B6 - TCSS Thunderbolt PCIE Root Port 0 Enable + Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie0En; + +/** Offset 0x05B7 - TCSS Thunderbolt PCIE Root Port 1 Enable + Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie1En; + +/** Offset 0x05B8 - TCSS Thunderbolt PCIE Root Port 2 Enable + Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie2En; + +/** Offset 0x05B9 - TCSS Thunderbolt PCIE Root Port 3 Enable + Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie3En; + +/** Offset 0x05BA - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x05BB - TCSS USB DEVICE (xDCI) Enable + Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled + $EN_DIS +**/ + UINT8 TcssXdciEn; + +/** Offset 0x05BC - TCSS DMA0 Enable + Set TCSS DMA0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma0En; + +/** Offset 0x05BD - TCSS DMA1 Enable + Set TCSS DMA1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma1En; + +/** Offset 0x05BE - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x05BF - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x05C0 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x05C1 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x05C3 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x05C4 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x05C5 - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x05C6 - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x05C7 - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x05C8 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x05C9 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x05CA - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x05CB - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x05CC - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x05CD - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x05CE - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x05CF - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x05D0 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x05D1 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x05D2 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x05D3 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x05D4 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x05D5 - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x05D6 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x05D7 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x05D8 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x05D9 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x05DA - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x05DB - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x05DC - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x05DD - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x05DE - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x05DF - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x05E0 - Ibecc + In-Band ECC Support + $EN_DIS +**/ + UINT8 Ibecc; + +/** Offset 0x05E1 - IbeccParity + In-Band ECC Parity Control + $EN_DIS +**/ + UINT8 IbeccParity; + +/** Offset 0x05E2 - IbeccOperationMode + In-Band ECC Operation Mode + 0:Protect base on address range, 1: Non-protected, 2: All protected +**/ + UINT8 IbeccOperationMode; + +/** Offset 0x05E3 - IbeccProtectedRegionEnable + In-Band ECC Protected Region Enable + $EN_DIS +**/ + UINT8 IbeccProtectedRegionEnable[8]; + +/** Offset 0x05EB +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x05EC - IbeccProtectedRegionBases + IBECC Protected Region Bases +**/ + UINT16 IbeccProtectedRegionBase[8]; + +/** Offset 0x05FC - IbeccProtectedRegionMasks + IBECC Protected Region Masks +**/ + UINT16 IbeccProtectedRegionMask[8]; + +/** Offset 0x060C - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x060D - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x060E - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x060F - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x0610 - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x0611 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x0612 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x0613 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0614 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0615 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0616 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0617 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0618 - New Features 1 - MRC + New Feature Enabling 1, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable1; + +/** Offset 0x0619 - New Features 2 - MRC + New Feature Enabling 2, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable2; + +/** Offset 0x061A - Duty Cycle Correction Training + Enable/Disable Duty Cycle Correction Training + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x061B - Read Voltage Centering 1D + Enable/Disable Read Voltage Centering 1D + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x061C - TxDqTCO Comp Training + Enable/Disable TxDqTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x061D - ClkTCO Comp Training + Enable/Disable ClkTCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x061E - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x061F - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x0620 - DIMM CA ODT Training + Enable/Disable DIMM CA ODT Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x0621 - TxDqsTCO Comp Training + Enable/Disable TxDqsTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCODQS; + +/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D + Enable/Disable CMD/CTL Drive Strength Up/Dn 2D + $EN_DIS +**/ + UINT8 CMDDRUD; + +/** Offset 0x0623 - VccDLL Bypass Training + Enable/Disable VccDLL Bypass Training + $EN_DIS +**/ + UINT8 VCCDLLBP; + +/** Offset 0x0624 - PanicVttDnLp Training + Enable/Disable PanicVttDnLp Training + $EN_DIS +**/ + UINT8 PVTTDNLP; + +/** Offset 0x0625 - Read Vref Decap Training* + Enable/Disable Read Vref Decap Training* + $EN_DIS +**/ + UINT8 RDVREFDC; + +/** Offset 0x0626 - Vddq Training + Enable/Disable Vddq Training + $EN_DIS +**/ + UINT8 VDDQT; + +/** Offset 0x0627 - Rank Margin Tool Per Bit + Enable/Disable Rank Margin Tool Per Bit + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x0628 +**/ + UINT8 Reserved2[2]; + +/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x062C - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x062D +**/ + UINT8 UnusedUpdSpace16; + +/** Offset 0x062E - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x0830 +**/ + UINT16 ChHashMask; + +/** Offset 0x0630 - Base reference clock value + Base reference clock value, in Hertz(Default is 100Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0634 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x0636 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x0638 - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm0; + +/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm1; + +/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm0; + +/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm1; + +/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm0; + +/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm1; + +/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm0; + +/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm1; + +/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm0; + +/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm1; + +/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm0; + +/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm1; + +/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm0; + +/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm1; + +/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm0; + +/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm1; + +/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm0; + +/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm1; + +/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm0; + +/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm1; + +/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm0; + +/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm1; + +/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm0; + +/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm1; + +/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm0; + +/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm1; + +/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm0; + +/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm1; + +/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm0; + +/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm1; + +/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm0; + +/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm1; + +/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm0; + +/** Offset 0x065A - Write Energy Mc0Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm1; + +/** Offset 0x065B - Write Energy Mc0Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm0; + +/** Offset 0x065C - Write Energy Mc0Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm1; + +/** Offset 0x065D - Write Energy Mc1Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm0; + +/** Offset 0x065E - Write Energy Mc1Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm1; + +/** Offset 0x065F - Write Energy Mc1Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm0; + +/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm1; + +/** Offset 0x0661 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x00 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0662 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x0663 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x0664 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x0665 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x0666 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x0667 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x0668 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0669 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x066A - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x066B - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x066C - Page Close Idle Timeout + This option controls Page Close Idle Timeout + 0:Enabled, 1:Disabled +**/ + UINT8 DisPgCloseIdleTimeout; + +/** Offset 0x066D - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. 0x01=Default, + Rank0 is terminating and Rank1 is non-terminating +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x066E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x066F - Fivr Faults + Fivr Faults; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x0670 - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x0671 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x0672 - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x0673 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x0674 - TCSS USB Port Enable + Bitmap for per port enabling +**/ + UINT8 UsbTcPortEnPreMem; + +/** Offset 0x0675 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x0676 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0678 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0679 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x067A - WRC Feature + Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports + IO devices allocating onto the ring and into LLC. WRC is fused on by default. + $EN_DIS +**/ + UINT8 WrcFeatureEnable; + +/** Offset 0x067B +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x067C - BCLK RFI Frequency + Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz 0 - No + RFI Tuning. Range is 98Mhz-100Mhz. +**/ + UINT32 BclkRfiFreq[4]; + +/** Offset 0x068C - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x068E - Enable PCIe IMR + 0: Disable(AUTO), 1: Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x068F - Enable PCIe IMR + 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select + the Root port location from PCH PCIe or SA PCIe + $EN_DIS +**/ + UINT8 PcieImrRpLocation; + +/** Offset 0x0690 - Root port number for IMR. + Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port + from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 +**/ + UINT8 PcieImrRpSelection; + +/** Offset 0x0691 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0692 - Mem Boot Mode + 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION + 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION +**/ + UINT8 MemBootMode; + +/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom + This option is specifically needed for ASPM configuration in 2LM feature + 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto +**/ + UINT8 Peg3Aspm; + +/** Offset 0x0694 - MFVC WRR VC Arbitration + 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES + 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES +**/ + UINT8 MfvcWrrArb; + +/** Offset 0x0695 - BZM Support + 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support + $EN_DIS +**/ + UINT8 BzmSupport; + +/** Offset 0x0696 - VcId_7_0 values + Select VC ID for arbitration +**/ + UINT8 VcId_7_0[16]; + +/** Offset 0x06A6 - Set Hw Parameters enable/disable + 1: enable, 0: disable, Enable/disable setting of HW parameters + $EN_DIS +**/ + UINT8 SetHwParameters; + +/** Offset 0x06A7 +**/ + UINT8 UnusedUpdSpace19; + +/** Offset 0x06A8 - LTR L1.2 Threshold Value + LTR L1.2 Threshold Value +**/ + UINT16 Ltr_L1D2_ThVal; + +/** Offset 0x06AA - LTR L1.2 Threshold Scale + LTR L1.2 Threshold Scale +**/ + UINT8 Ltr_L1D2_ThScale; + +/** Offset 0x06AB - system power state + system power state indicates the platform power state +**/ + UINT8 SysPwrState; + +/** Offset 0x06AC - Media Death Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Media Death Notification + $EN_DIS +**/ + UINT8 MediaDeathNotification; + +/** Offset 0x06AD - Health Log Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Health Log Notification + $EN_DIS +**/ + UINT8 HealthLogNotification; + +/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification + $EN_DIS +**/ + UINT8 TempBelowThrottleNotification; + +/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification + $EN_DIS +**/ + UINT8 TempAboveThrottleNotification; + +/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification + $EN_DIS +**/ + UINT8 MissingCommitBitNotification; + +/** Offset 0x06B1 - NVMeHoldDisableBit + 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit + $EN_DIS +**/ + UINT8 NVMeHoldDisableBit; + +/** Offset 0x06B2 - Ddr4OneDpc + DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 Ddr4OneDpc; + +/** Offset 0x06B3 - Ch Hash Override POR settings + Enable/Disable Override Channel Hash Support POR values + $EN_DIS +**/ + UINT8 ChHashOverride; + +/** Offset 0x06B4 - PDA Enumeration + Enables/Disable PDA Enumeration + $EN_DIS +**/ + UINT8 PDA; + +/** Offset 0x06B5 - DPin Policy + Set DPin Policy. Internal Only:All display ports are for internal only. External + First:All display ports are for external only, if there is no External DP-In presence + presents then IOM will use all ports internal only + 0: Internal Only, 1: External First +**/ + UINT8 DpInExternalEn; + +/** Offset 0x06B6 - DPin External Ports Number + Total number of External Gfx DpIn Port present on Board. Currently hardware wise + max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports +**/ + UINT8 NumberOfDpInPort; + +/** Offset 0x06B7 - DPin External Port Connect Map + Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port. +**/ + UINT8 DpInPortConnectMap; + +/** Offset 0x06B8 - Command Pins Mapping + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. +**/ + UINT8 Lp5CccConfig[4]; + +/** Offset 0x06BC - Command Pins Mirrored + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. +**/ + UINT32 CmdMirror[1]; + +/** Offset 0x06C0 - CPU BCLK SSC Enable + Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled. + $EN_DIS +**/ + UINT8 CpuBclkSpread; + +/** Offset 0x06C1 - McParity + CMI/MC Parity Control + $EN_DIS +**/ + UINT8 McParity; + +/** Offset 0x06C2 - Vddq Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VddqVoltageOverride; + +/** Offset 0x06C4 - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x06C5 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x06C6 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x06C8 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x06C9 - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x06CA - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x06CB - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x06CC - PMR Size + Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot +**/ + UINT32 DmaBufferSize; + +/** Offset 0x06D0 - VT-d/IOMMU Boot Policy + BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS +**/ + UINT8 PreBootDmaMask; + +/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq + Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): + Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiHweq; + +/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass + CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0): Disable Phase 23 Bypass, Enabled(0x1)(Default): + Enable Phase 23 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase23Bypass; + +/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass + CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0): Disable Phase 3 Bypass, Enabled(0x1)(Default): + Enable Phase 3 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase3Bypass; + +/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable + Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local + Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter + Coefficient Override + $EN_DIS +**/ + UINT8 Gen3LtcoEnable; + +/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable + Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote + Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote + Transmitter Coefficient/Preset Override + $EN_DIS +**/ + UINT8 Gen3RtcoRtpoEnable; + +/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient + Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, + 2 is default for each lane +**/ + UINT8 DmiGen3Ltcpre[8]; + +/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient + Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default + for each lane +**/ + UINT8 DmiGen3Ltcpo[8]; + +/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCm[8]; + +/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCp[8]; + +/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable + Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, + Manual(0x1): Enable DmiGen3DsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3DsPresetEnable; + +/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3DsPortRxPreset[8]; + +/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3DsPortTxPreset[8]; + +/** Offset 0x0707 - Program DMI GEN3 Extended number of VC + (DEPRECATED) +**/ + UINT8 DmiGen3MultiVC; + +/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3Vc1Control; + +/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3VcMControl; + +/** Offset 0x070A - DMI Secure Register Lock:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiSrl; + +/** Offset 0x070B - DMI Scramble Enable:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiScramble; + +/** Offset 0x070C - DMI Max Payload Size:{Combo + (DEPRECATED) + 0:Auto, 1:128 TLP, 2:256 TLP +**/ + UINT8 DmiMaxPayload; + +/** Offset 0x070D - DPin Dynamic Switch Policy + Dynamic one-time switch from iGFx to dGFx after boot to OS + 0: Disble, 1: Enable +**/ + UINT8 DPinDynamicSwitch; + +/** Offset 0x070E - Delay before sending commn + Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this + value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default + is 0 second +**/ + UINT16 DPinDynamicSwitchDelay0; + +/** Offset 0x0710 - Delay before IOM de-assert HPD + Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending + dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second +**/ + UINT16 DPinDynamicSwitchDelay1; + +/** Offset 0x0712 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[28]; + +/** Offset 0x072E - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0730 - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x0732 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[12]; + +/** Offset 0x073E - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x073F - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x0740 - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x0741 - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x0743 - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x0744 - Enable HDA SDI lanes + Enable/disable HDA SDI lanes. +**/ + UINT8 PchHdaSdiEnable[2]; + +/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x0747 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0749 +**/ + UINT8 UnusedUpdSpace20[3]; + +/** Offset 0x074C - DMIC ClkA Pin Muxing (N - DMIC number) + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKA_* +**/ + UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; + +/** Offset 0x0754 - DMIC ClkB Pin Muxing + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKB_* +**/ + UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; + +/** Offset 0x075C - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace21[3]; + +/** Offset 0x0760 - DMIC Data Pin Muxing + Determines DMIC Data Pin muxing. See GPIO_*_MUXING_DMIC_DATA_* +**/ + UINT32 PchHdaAudioLinkDmicDataPinMux[2]; + +/** Offset 0x0768 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x076E - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x0772 - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x0773 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x0774 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x0775 - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0776 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0777 - ME DID Message + (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable + will prevent the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x0778 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0779 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x077A - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x077B - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1 + Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie1Rtd3Gpio[24]; + +/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2 + Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie2Rtd3Gpio[24]; + +/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3 + Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie3Rtd3Gpio[24]; + +/** Offset 0x089C - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x089D - PCI Express Dekel Workaround + Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum, + default is 2 +**/ + UINT8 CpuPcieRpDekelSquelchWa; + +/** Offset 0x089E - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x089F +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugRxPinMux; + +/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugTxPinMux; + +/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartDebugRtsPinMux; + +/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartDebugCtsPinMux; + +/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor + AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 + in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; + +/** Offset 0x08B2 - Lane Used of CSI port + Lane Used of each CSI port + 1:x1, 2:x2, 3:x3, 4:x4, 8:x8 +**/ + UINT8 IpuLaneUsed[8]; + +/** Offset 0x08BA - Lane Used of CSI port + Speed of each CSI port + 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps +**/ + UINT8 CsiSpeed[8]; + +/** Offset 0x08C2 - DPmem Support + 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support + $EN_DIS +**/ + UINT8 DpmemSupport; + +/** Offset 0x08C3 - Core VF Point Offset Mode + Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes; + 0: Legacy; 1: Selection. + 0:Legacy, 1:Selection +**/ + UINT8 CoreVfPointOffsetMode; + +/** Offset 0x08C4 - Core VF Point Offset + Array used to specifies the Offset Voltage applied to the each selected Core VF + Point. This voltage is specified in millivolts. +**/ + UINT16 CoreVfPointOffset[15]; + +/** Offset 0x08E2 - Core VF Point Offset Prefix + Sets the CoreVfPointOffset value as positive or negative for corresponding core + VF Point; 0: Positive ; 1: Negative. + 0:Positive, 1:Negative +**/ + UINT8 CoreVfPointOffsetPrefix[15]; + +/** Offset 0x08F1 - Core VF Point Ratio + Array for the each selected Core VF Point to display the ration. +**/ + UINT8 CoreVfPointRatio[15]; + +/** Offset 0x0900 - Core VF Point Count + Number of supported Core Voltage & Frequency Point Offset +**/ + UINT8 CoreVfPointCount; + +/** Offset 0x0901 - Enable CPU CrashLog GPRs dump + Enable or Disable CPU CrashLog GPRs dump; 0: Disable; 1: Enable; 2: Only + disable Smm GPRs dump + 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled +**/ + UINT8 CrashLogGprs; + +/** Offset 0x0902 +**/ + UINT8 UnusedUpdSpace23[2]; + +/** Offset 0x0904 - Bitmask of disable cores + Core mask is a bitwise indication of which core should be disabled. 0x00=Default; + Bit 0 - core 0, bit 7 - core 7. +**/ + UINT32 DisableCoreMask; + +/** Offset 0x0908 - REFRESH_PANIC_WM + Refresh Panic Watermark, range 1-8, Default is 8 +**/ + UINT8 RefreshPanicWm; + +/** Offset 0x0909 - REFRESH_HP_WM + Refresh High Priority Watermark, range 1-7, Default is 7 +**/ + UINT8 RefreshHpWm; + +/** Offset 0x090A - Support Unlimited ICCMAX + Support Unlimited ICCMAX more than maximum value 255.75A; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 UnlimitedIccMax; + +/** Offset 0x090B - Per Core Max Ratio override + Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new + favored core ratio to each Core. 0: Disable, 1: enable + $EN_DIS +**/ + UINT8 PerCoreRatioOverride; + +/** Offset 0x090C - Per Core Current Max Ratio + Array for the Per Core Max Ratio +**/ + UINT8 PerCoreRatio[10]; + +/** Offset 0x0916 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x0917 +**/ + UINT8 UnusedUpdSpace24; + +/** Offset 0x0918 - Margin Limit L2 + % of L1 check for margin limit check +**/ + UINT16 MarginLimitL2; + +/** Offset 0x091A - Iotg Pll SscEn + Enable or disable CPU SSC. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 IotgPllSscEn; + +/** Offset 0x091B - GPIO Override + Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings + before moved to FSP. Available configurations 0: Disable;1: Level 1 - skips GpioSetNativePadByFunction;Level + 2 - skips GpioSetNativePadByFunction and GpioSetPadMode +**/ + UINT8 GpioOverride; + +/** Offset 0x091C - Write0 enabling + Enable/Disable Write0 + $EN_DIS +**/ + UINT8 WRITE0; + +/** Offset 0x091D +**/ + UINT8 UnusedUpdSpace25[3]; + +/** Offset 0x0920 +**/ + UINT32 VccInVoltageOverride; + +/** Offset 0x0924 - Dynamic Memory Timings Changes + Dynamic Memory Timings Changes; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 DynamicMemoryChange; + +/** Offset 0x0925 - IbeccErrorInj + In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable + this option for production systems. + $EN_DIS +**/ + UINT8 IbeccErrorInj; + +/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable + Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, + Manual(0x1): Enable DmiGen3UsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3UsPresetEnable; + +/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3UsPortRxPreset[8]; + +/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3UsPortTxPreset[8]; + +/** Offset 0x0937 - BCLK Frequency Source + Clock source of BCLK OC frequency, 0:CPU BCLK, 1:PCH BCLK, 2:External CLK + 0:CPU BCLK, 1:PCH BCLK, 2:External CLK +**/ + UINT8 BclkSource; + +/** Offset 0x0938 - CPU BCLK OC Frequency + CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz 0 + - Auto. Range is 8000-50000 (10KHz). +**/ + UINT32 CpuBclkOcFrequency; + +/** Offset 0x093C - Ring CCF Auto Gv Disable Down + Ring CCF Auto Gv Disable Down, 0: Disabled, 1:Fused default + 0:Disabled, 1:Fused default +**/ + UINT8 RingCcfAutoGvDisable; + +/** Offset 0x093D - SA/Uncore voltage mode + SA/Uncore voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 SaVoltageMode; + +/** Offset 0x093E - SA/Uncore Voltage Override + The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override + mode. Valid Range 0 to 2000 +**/ + UINT16 SaVoltageOverride; + +/** Offset 0x0940 - SA/Uncore Extra Turbo voltage + Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode. + Valid Range 0 to 2000 +**/ + UINT16 SaExtraTurboVoltage; + +/** Offset 0x0942 +**/ + UINT8 UnusedUpdSpace26[5]; + +/** Offset 0x0947 +**/ + UINT8 ReservedFspmUpd2[1]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0948 +**/ + UINT8 UnusedUpdSpace27[6]; + +/** Offset 0x094E +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/models/darp7/FSP/Include/FspsUpd.h b/models/darp7/FSP/Include/FspsUpd.h new file mode 100644 index 0000000..7537647 --- /dev/null +++ b/models/darp7/FSP/Include/FspsUpd.h @@ -0,0 +1,4201 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x002C - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x0030 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x0034 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x0035 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x0036 +**/ + UINT8 UnusedUpdSpace0[2]; + +/** Offset 0x0038 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x003C - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0040 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0041 - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0042 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x004A - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x0052 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0062 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x006C - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x006D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x0074 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0075 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x007D - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x007E - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x007F - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x0080 - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x0081 - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x0082 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0084 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0089 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x008A - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x008B - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[7]; + +/** Offset 0x0092 - SPI Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, + 1:SerialIoSpiCsActiveHigh +**/ + UINT8 SerialIoSpiCsPolarity[14]; + +/** Offset 0x00A0 - SPI Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpiCsEnable[14]; + +/** Offset 0x00AE - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[7]; + +/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[7]; + +/** Offset 0x00BC - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[7]; + +/** Offset 0x00C3 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x00CA +**/ + UINT8 UnusedUpdSpace3[2]; + +/** Offset 0x00CC - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x00E8 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x00EF - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x00F6 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x0112 +**/ + UINT8 UnusedUpdSpace4[2]; + +/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMuxPolicy[7]; + +/** Offset 0x0130 - SerialIoUartCtsPinMuxPolicy + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMuxPolicy[7]; + +/** Offset 0x014C - SerialIoUartRxPinMuxPolicy + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMuxPolicy[7]; + +/** Offset 0x0168 - SerialIoUartTxPinMuxPolicy + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMuxPolicy[7]; + +/** Offset 0x0184 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, + 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used + for debug purpose. + 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0185 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; 0: Disable; + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[7]; + +/** Offset 0x018C - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x0194 - Serial IO I2C SDA Pin Muxing + Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for + possible values. +**/ + UINT32 PchSerialIoI2cSdaPinMux[8]; + +/** Offset 0x01B4 - Serial IO I2C SCL Pin Muxing + Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for + possible values. +**/ + UINT32 PchSerialIoI2cSclPinMux[8]; + +/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[8]; + +/** Offset 0x01DC - ISH GP GPIO Pin Muxing + Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER +**/ + UINT32 IshGpGpioPinMuxing[8]; + +/** Offset 0x01FC - ISH UART Rx Pin Muxing + Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* +**/ + UINT32 IshUartRxPinMuxing[3]; + +/** Offset 0x0208 - ISH UART Tx Pin Muxing + Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* +**/ + UINT32 IshUartTxPinMuxing[3]; + +/** Offset 0x0214 - ISH UART Rts Pin Muxing + Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. +**/ + UINT32 IshUartRtsPinMuxing[3]; + +/** Offset 0x0220 - ISH UART Rts Pin Muxing + Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. +**/ + UINT32 IshUartCtsPinMuxing[3]; + +/** Offset 0x022C - ISH I2C SDA Pin Muxing + Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. +**/ + UINT32 IshI2cSdaPinMuxing[3]; + +/** Offset 0x0238 - ISH I2C SCL Pin Muxing + Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. +**/ + UINT32 IshI2cSclPinMuxing[3]; + +/** Offset 0x0244 - ISH SPI MOSI Pin Muxing + Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. +**/ + UINT32 IshSpiMosiPinMuxing[2]; + +/** Offset 0x024C - ISH SPI MISO Pin Muxing + Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. +**/ + UINT32 IshSpiMisoPinMuxing[2]; + +/** Offset 0x0254 - ISH SPI CLK Pin Muxing + Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. +**/ + UINT32 IshSpiClkPinMuxing[2]; + +/** Offset 0x025C - ISH SPI CS#N Pin Muxing + Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS_* for possible + values. N-SPI number, 0-1. +**/ + UINT32 IshSpiCsPinMuxing[4]; + +/** Offset 0x026C - ISH GP GPIO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination + respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index + 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 +**/ + UINT8 IshGpGpioPadTermination[8]; + +/** Offset 0x0274 - ISH UART Rx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 + Rx, and so on. +**/ + UINT8 IshUartRxPadTermination[3]; + +/** Offset 0x0277 - ISH UART Tx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 + Tx, and so on. +**/ + UINT8 IshUartTxPadTermination[3]; + +/** Offset 0x027A - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 + Rts, and so on. +**/ + UINT8 IshUartRtsPadTermination[3]; + +/** Offset 0x027D - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 + Cts, and so on. +**/ + UINT8 IshUartCtsPadTermination[3]; + +/** Offset 0x0280 - ISH I2C SDA Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, + and so on. +**/ + UINT8 IshI2cSdaPadTermination[3]; + +/** Offset 0x0283 - ISH I2C SCL Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, + and so on. +**/ + UINT8 IshI2cSclPadTermination[3]; + +/** Offset 0x0286 - ISH SPI MOSI Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 + Mosi, and so on. +**/ + UINT8 IshSpiMosiPadTermination[2]; + +/** Offset 0x0288 - ISH SPI MISO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 + Miso, and so on. +**/ + UINT8 IshSpiMisoPadTermination[2]; + +/** Offset 0x028A - ISH SPI CLK Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, + and so on. +**/ + UINT8 IshSpiClkPadTermination[2]; + +/** Offset 0x028C - ISH SPI CS#N Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination + respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 + Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 +**/ + UINT8 IshSpiCsPadTermination[4]; + +/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned + Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs + number: 0-1 +**/ + UINT8 PchIshSpiCsEnable[4]; + +/** Offset 0x0294 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x02A4 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x02B4 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x02C4 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x02D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x02DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + Default = 29h (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x02E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x02F2 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], Default + = 00h. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x02FC +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x0306 +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x0310 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x031A +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x0324 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x032E +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x0338 +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x0342 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x034C - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x034D - Enable PCH TSN + Enable/disable TSN on the PCH. + $EN_DIS +**/ + UINT8 PchTsnEnable; + +/** Offset 0x034E - TSN Link Speed + Set TSN Link Speed. + 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps +**/ + UINT8 PchTsnLinkSpeed; + +/** Offset 0x034F +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0350 - PCH TSN0 MAC Address High Bits + Set TSN0 MAC Address High. +**/ + UINT32 PchTsn0MacAddressHigh; + +/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits + Set TSN0 MAC Address Low. +**/ + UINT32 PchTsn0MacAddressLow; + +/** Offset 0x0358 - PCIe PTM enable/disable + Enable/disable Precision Time Measurement for PCIE Root Ports. +**/ + UINT8 PciePtm[24]; + +/** Offset 0x0370 - PCIe DPC enable/disable + Enable/disable Downstream Port Containment for PCIE Root Ports. +**/ + UINT8 PcieDpc[24]; + +/** Offset 0x0388 - PCIe DPC extensions enable/disable + Enable/disable Downstream Port Containment Extensions for PCIE Root Ports. +**/ + UINT8 PcieEdpc[24]; + +/** Offset 0x03A0 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x03A1 +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x03A4 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x03A9 - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x03AB - Mask to enable the platform configuration of external V1p05 VR rail + External V1P05 Rail Supported Configuration +**/ + UINT8 PchFivrExtV1p05RailSupportedVoltageStates; + +/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x03AE - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x03B0 - Mask to enable the platform configuration of external Vnn VR rail + External Vnn Rail Supported Configuration +**/ + UINT8 PchFivrExtVnnRailSupportedVoltageStates; + +/** Offset 0x03B1 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x03BA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x03BE +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x03C0 - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x03C4 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x03C5 +**/ + UINT8 UnusedUpdSpace9[3]; + +/** Offset 0x03C8 - Pointer of ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x03CC - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x03D0 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x03D1 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x03D2 - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtV1p05RailIccMaximum; + +/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailIccMaximum; + +/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailSxIccMaximum; + +/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL) + Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves + addresseses from range 0x0 - 0x7FF + $EN_DIS +**/ + UINT8 PchEspiLockLinkConfiguration; + +/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable + Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads. + 0: disabled (default), 1: enabled + $EN_DIS +**/ + UINT8 PchSpiExtendedBiosDecodeRangeEnable; + +/** Offset 0x03DA - Enforce Enhanced Debug Mode + Determine if ME should enter Enhanced Debug Mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 EnforceEDebugMode; + +/** Offset 0x03DB - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd[1]; + +/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base + Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeBase; + +/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit + Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeLimit; + +/** Offset 0x03E4 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x03E5 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x03E6 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x03E7 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x03E8 - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default) + or GPP_F4 = 0x194CE404. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x03EC - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default) + or GPP_F5 = 0x394CE605. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in + GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x03F0 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x03F2 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x03F3 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x03F4 - External V1P05 Control Ramp Timer value + Hold off time to be used when changing the v1p05_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtV1p05RailCtrlRampTmr; + +/** Offset 0x03F5 - External VNN Control Ramp Timer value + Hold off time to be used when changing the vnn_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtVnnRailCtrlRampTmr; + +/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config + Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, + 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte + for each port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlpResetConfig[8]; + +/** Offset 0x03FE - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + DEPRECATED 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x03FF - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x0400 - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x0401 - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x0402 - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x0403 - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x0404 - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x0405 - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x0406 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0407 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0408 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x040A - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x040C - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x040D - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x040E - Force MEBX execution + Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x040F - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x043F - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x0457 +**/ + UINT8 UnusedUpdSpace13[1]; + +/** Offset 0x0458 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x0489 - V1p05-PHY supply external FET control + Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05PhyExtFetControlEn; + +/** Offset 0x048A - V1p05-IS supply external FET control + Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05IsExtFetControlEn; + +/** Offset 0x048B - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x048C - CdClock Frequency selection + 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: + 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz + 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz, + 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x048D - Enable/Disable PeiGraphicsPeimInit + Enable(Default): FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. + Disable: FSP will NOT initialize the framebuffer. + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x048E - Enable D3 Hot in TCSS + This policy will enable/disable D3 hot support in IOM + $EN_DIS +**/ + UINT8 D3HotEnable; + +/** Offset 0x048F - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x0490 - TypeC port GPIO setting + GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Tgl + = TigerLake) +**/ + UINT32 IomTypeCPortPadCfg[8]; + +/** Offset 0x04B0 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[8]; + +/** Offset 0x04B8 - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4 + Enable/Disable PCIe tunneling for USB4, default is enable + $EN_DIS +**/ + UINT8 ITbtPcieTunnelingForUsb4; + +/** Offset 0x04BA - Enable/Disable SkipFspGop + Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver + $EN_DIS +**/ + UINT8 SkipFspGop; + +/** Offset 0x04BB - TC State in TCSS + This TC C-State Limit in IOM +**/ + UINT8 TcCstateLimit; + +/** Offset 0x04BC - SaPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 SaPostMemRsvd[5]; + +/** Offset 0x04C1 - Enable VMD controller + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdEnable; + +/** Offset 0x04C2 - Enable VMD portA Support + Enable/disable to VMD portA Support. + $EN_DIS +**/ + UINT8 VmdPortA; + +/** Offset 0x04C3 - Enable VMD portB Support + Enable/disable to VMD portB Support. + $EN_DIS +**/ + UINT8 VmdPortB; + +/** Offset 0x04C4 - Enable VMD portC Support + Enable/disable to VMD portC Support. + $EN_DIS +**/ + UINT8 VmdPortC; + +/** Offset 0x04C5 - Enable VMD portD Support + Enable/disable to VMD portD Support. + $EN_DIS +**/ + UINT8 VmdPortD; + +/** Offset 0x04C6 - VMD Config Bar size + Set The VMD Config Bar Size. +**/ + UINT8 VmdCfgBarSize; + +/** Offset 0x04C7 - VMD Config Bar Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default) + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdCfgBarAttr; + +/** Offset 0x04C8 - VMD Mem Bar1 size + Set The VMD Mem Bar1 Size. +**/ + UINT8 VmdMemBarSize1; + +/** Offset 0x04C9 - VMD Mem Bar1 Attributes + 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar1Attr; + +/** Offset 0x04CA - VMD Mem Bar2 size + Set The VMD Mem Bar2 Size. +**/ + UINT8 VmdMemBarSize2; + +/** Offset 0x04CB - VMD Mem Bar2 Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar2Attr; + +/** Offset 0x04CC - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x04CD +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x04CE - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x04D0 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x04D2 - USB override in IOM + This policy will enable/disable USB Connect override in IOM + $EN_DIS +**/ + UINT8 UsbOverride; + +/** Offset 0x04D3 - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x04D4 - ITBT Root Port Enable + ITBT Root Port Enable, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 ITbtPcieRootPortEn[4]; + +/** Offset 0x04D8 - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x04DA - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x04DC - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x04DD - TCSS Usb3 Compliance Mode Enable + Used by IOM FW to skip powering down the PHY at the end of disconnect flow + $EN_DIS +**/ + UINT8 Usb3ComplModeEnable; + +/** Offset 0x04DE - ITBT DMA LTR + TCSS DMA1, DMA2 LTR value +**/ + UINT16 ITbtDmaLtr[2]; + +/** Offset 0x04E2 - Enable/Disable CrashLog + Deprecated. Move to PreMem + $EN_DIS +**/ + UINT8 DeprecatedCpuCrashLogEnable; + +/** Offset 0x04E3 - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x04E7 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x04F3 +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x050C - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x0510 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x0514 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0515 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; 1: Enable. + For all VR Indexes +**/ + UINT8 Psi3Enable[5]; + +/** Offset 0x051A - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 Psi4Enable[5]; + +/** Offset 0x051F +**/ + UINT8 UnusedUpdSpace16[1]; + +/** Offset 0x0520 - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes +**/ + UINT16 ImonSlope[5]; + +/** Offset 0x052A - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. 0: Auto +**/ + UINT16 ImonOffset[5]; + +/** Offset 0x0534 - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; 0: Disable; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable[5]; + +/** Offset 0x0539 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; 0: Disable; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable[5]; + +/** Offset 0x053E - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - + 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index +**/ + UINT8 TdcTimeWindow[5]; + +/** Offset 0x0543 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock[5]; + +/** Offset 0x0548 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. 0 - Auto Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x0549 +**/ + UINT8 PsysOffset; + +/** Offset 0x054A - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. 0: False; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisable[5]; + +/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains + Slew Rate configuration for Deep Package C States for VR domains based on Acoustic + Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRate[5]; + +/** Offset 0x0555 - Enable multi phases silicon initialization + A switch to determine MultiPhaseSiInit will be executed or not + $EN_DIS +**/ + UINT8 EnableMultiPhaseSiliconInit; + +/** Offset 0x0556 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. 0: Auto. For all VR Indexes +**/ + UINT16 TdcCurrentLimit[5]; + +/** Offset 0x0560 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline[5]; + +/** Offset 0x056A - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 DcLoadline[5]; + +/** Offset 0x0574 - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold[5]; + +/** Offset 0x057E - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold[5]; + +/** Offset 0x0588 - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold[5]; + +/** Offset 0x0592 - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax[5]; + +/** Offset 0x059C - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit[5]; + +/** Offset 0x05A6 - Enable VR specific mailbox command + VR specific mailbox commands. 00b - no VR specific command sent. 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x05A7 - Reserved + Reserved +**/ + UINT8 Reserved2; + +/** Offset 0x05A8 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x05A9 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize; 1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x05AA - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. 0: + Auto. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x05AC - FIVR RFI Spread Spectrum + Set the Spread Spectrum Range. 1.5%; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, + 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1% + = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44. +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x05AD +**/ + UINT8 UnusedUpdSpace17[3]; + +/** Offset 0x05B0 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x05B4 - CpuMpPpi + Optional pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. +**/ + UINT32 CpuMpPpi; + +/** Offset 0x05B8 - CpuMpHob + @deprecated This is not needed in current version of FSP. +**/ + UINT32 CpuMpHob; + +/** Offset 0x05BC - RFI Mitigation + Enable or Disable RFI Mitigation. 0: Disable - DCM is the IO_N default; 1: + Enable - Enable IO_N DCM/CCM switching as RFI mitigation. + $EN_DIS +**/ + UINT8 RfiMitigation; + +/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable + Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; 1: Enable +**/ + UINT8 FivrSpectrumEnable; + +/** Offset 0x05BE - Pre Wake Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled. Range 0-255 0. +**/ + UINT8 PreWake; + +/** Offset 0x05BF - Ramp Up Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampUp; + +/** Offset 0x05C0 - Ramp Down Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampDown; + +/** Offset 0x05C1 +**/ + UINT8 CpuPostMemRsvd[11]; + +/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number + Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this + flag is set) for PPIN Support + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x05CD - Enable or Disable Minimum Voltage Override + Enable or disable Minimum Voltage overrides ; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableMinVoltageOverride; + +/** Offset 0x05CE - Min Voltage for Runtime + PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride + = 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageRuntime; + +/** Offset 0x05D0 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x05D8 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x05DC - Min Voltage for C8 + PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = + 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageC8; + +/** Offset 0x05DE - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. 0 - Auto Units 1/1000, + Range 0-63999. For an offset of 25.348, enter 25348. +**/ + UINT16 PsysOffset1; + +/** Offset 0x05E0 - Smbios Type4 Max Speed Override + Provide the option for platform to override the MaxSpeed field of Smbios Type 4. + If this value is not zero, it dominates the field. +**/ + UINT16 SmbiosType4MaxSpeedOverride; + +/** Offset 0x05E2 - AvxDisable + Enable or Disable AVX Support. + 0: Enable, 1: Disable +**/ + UINT8 AvxDisable; + +/** Offset 0x05E3 - Avx3Disable + Enable or Disable AVX3 Support + 0: Enable, 1: Disable +**/ + UINT8 Avx3Disable; + +/** Offset 0x05E4 - ReservedCpuPostMemProduction + Reserved for CPU Post-Mem Production + $EN_DIS +**/ + UINT8 ReservedCpuPostMemProduction[4]; + +/** Offset 0x05E8 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x05F3 +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x05F4 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x05FE - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x0608 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x0609 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x060A - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd4[3]; + +/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned + Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiCs0Enable[1]; + +/** Offset 0x060E - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x060F - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x0610 - Enable PCH ISH SPI pins assigned + Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiEnable[1]; + +/** Offset 0x0611 - Enable PCH ISH UART pins assigned + Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshUartEnable[2]; + +/** Offset 0x0613 - Enable PCH ISH I2C pins assigned + Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI2cEnable[3]; + +/** Offset 0x0616 - Enable PCH ISH GP pins assigned + Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshGpEnable[8]; + +/** Offset 0x061E - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0621 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0622 - RTC BIOS Interface Lock + Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. + $EN_DIS +**/ + UINT8 RtcBiosInterfaceLock; + +/** Offset 0x0623 - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x0624 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x063C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x066C - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x0684 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x069C - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x06B4 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x06CC - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x06E4 - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x06FC - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x072C - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x0744 - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x075C - Touch Host Controller Port 0 Assignment + Assign THC Port 0 + 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0 +**/ + UINT8 ThcPort0Assignment; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux + Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort0InterruptPinMuxing; + +/** Offset 0x0764 - Touch Host Controller Port 1 Assignment + Assign THC Port 1 + 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1 +**/ + UINT8 ThcPort1Assignment; + +/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency + Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1ReadFrequency; + +/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency + Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1WriteFrequency; + +/** Offset 0x0767 +**/ + UINT8 UnusedUpdSpace20; + +/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux + Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort1InterruptPinMuxing; + +/** Offset 0x076C - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x0784 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x079C - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x07B4 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x07CC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x07E4 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x07FC - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x0814 - PCIe override default settings for EQ + Choose PCIe EQ method + $EN_DIS +**/ + UINT8 PcieEqOverrideDefault; + +/** Offset 0x0815 - PCIe choose EQ method + Choose PCIe EQ method + 0: HardwareEq, 1: FixedEq +**/ + UINT8 PcieEqMethod; + +/** Offset 0x0816 - PCIe choose EQ mode + Choose PCIe EQ mode + 0: PresetEq, 1: CoefficientEq +**/ + UINT8 PcieEqMode; + +/** Offset 0x0817 - PCIe EQ local transmitter override + Enable/Disable local transmitter override + $EN_DIS +**/ + UINT8 PcieEqLocalTransmitterOverrideEnable; + +/** Offset 0x0818 - PCIe number of valid list entries + Select number of presets or coefficients depending on the mode +**/ + UINT8 PcieEqPh3NumberOfPresetsOrCoefficients; + +/** Offset 0x0819 - PCIe pre-cursor coefficient list + Provide a list of pre-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PreCursorList[10]; + +/** Offset 0x0823 - PCIe post-cursor coefficient list + Provide a list of post-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PostCursorList[10]; + +/** Offset 0x082D - PCIe preset list + Provide a list of presets to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PresetList[11]; + +/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset + Allows to select the downstream port preset value that will be used during phase + 1 of equalization +**/ + UINT32 PcieEqPh1DownstreamPortTransmitterPreset; + +/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset + Allows to select the upstream port preset value that will be used during phase 1 + of equalization +**/ + UINT32 PcieEqPh1UpstreamPortTransmitterPreset; + +/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset + Allows to select the value of the preset used during phase 2 local transmitter override +**/ + UINT8 PcieEqPh2LocalTransmitterOverridePreset; + +/** Offset 0x0841 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0842 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0843 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen3ProgramStaticEq; + +/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming + Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen4ProgramStaticEq; + +/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x0847 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x0848 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x0849 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x084B - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x084D - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x084E - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x084F - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0850 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0851 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0852 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0853 - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x0854 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0855 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0856 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0858 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0859 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x085B - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x085C - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x085D - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x085E - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x085F - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x0860 - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0861 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x0869 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x0871 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x0879 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x0881 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x0889 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0891 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x0899 +**/ + UINT8 UnusedUpdSpace21[1]; + +/** Offset 0x089A - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x08AA - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x08B3 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x08B4 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x08B5 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x08B6 - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x08B7 - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x08BA - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x08BB - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x08BC - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x08BD - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x08C7 - UFS enable/disable + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x08C9 - IEH Mode + Integrated Error Handler Mode, 0: Bypass, 1: Enable + 0: Bypass, 1:Enable +**/ + UINT8 IehMode; + +/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x08D0 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x08D1 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x08D2 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x08D3 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x08D4 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x08D7 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x08D8 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x08D9 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x08DA - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x08DB - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x08DC - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x08DD - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x08DE - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x08DF - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x08E0 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x08E1 - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x08E2 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x08E3 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x08E5 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x08E8 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x08E9 - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x08EB - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x08ED - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x08EF +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08F0 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x08F2 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0902 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x090C - Enable xHCI LTR override + Enables override of recommended LTR values for xHCI + $EN_DIS +**/ + UINT8 PchUsbLtrOverrideEnable; + +/** Offset 0x090D +**/ + UINT8 UnusedUpdSpace23[3]; + +/** Offset 0x0910 - xHCI High Idle Time LTR override + Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting +**/ + UINT32 PchUsbLtrHighIdleTimeOverride; + +/** Offset 0x0914 - xHCI Medium Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting +**/ + UINT32 PchUsbLtrMediumIdleTimeOverride; + +/** Offset 0x0918 - xHCI Low Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting +**/ + UINT32 PchUsbLtrLowIdleTimeOverride; + +/** Offset 0x091C - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x091D - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x091E - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x091F - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x0920 - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode + Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. + Default is 0: Disabled + 0: Disabled, 1: Dynamic Configuration +**/ + UINT8 HybridStorageMode; + +/** Offset 0x0922 +**/ + UINT8 UnusedUpdSpace24[6]; + +/** Offset 0x0928 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0948 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x094C +**/ + UINT8 UnusedUpdSpace25[4]; + +/** Offset 0x0950 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0958 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x0960 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x0961 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x0962 +**/ + UINT8 UnusedUpdSpace26[6]; + +/** Offset 0x0968 - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x0970 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x0978 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x0979 - Si Config CSM Flag. + @deprecated Platform specific common policies that used by several silicon + components. CSM status flag. + $EN_DIS +**/ + UINT8 SiCsmFlag; + +/** Offset 0x097A - Skip Ssid Programming. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + $EN_DIS +**/ + UINT8 SiSkipSsidProgramming; + +/** Offset 0x097B +**/ + UINT8 UnusedUpdSpace27; + +/** Offset 0x097C - Change Default SVID + Change the default SVID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSvid; + +/** Offset 0x097E - Change Default SSID + Change the default SSID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSsid; + +/** Offset 0x0980 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0984 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x0986 - USB2 Port Reset Message Enable + 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message +**/ + UINT8 PortResetMessageEnable[16]; + +/** Offset 0x0996 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0997 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. 1: Enable ME Unconfig On Rtc Clear. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0998 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x099A - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x099B - PchDmiCwbEnable + Central Write Buffer feature configurable and enabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x099C - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x099D - S0ix Auto-Demotion + Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. + $EN_DIS +**/ + UINT8 PchS0ixAutoDemotion; + +/** Offset 0x099E - Latch Events C10 Exit + When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are + captured on C10 exit (instead of C10 entry which is default) + $EN_DIS +**/ + UINT8 PchPmLatchEventsC10Exit; + +/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm + CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieEqPh3LaneParamCm[32]; + +/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp + CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieEqPh3LaneParamCp[32]; + +/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCm[5]; + +/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCp[5]; + +/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCm[5]; + +/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCp[5]; + +/** Offset 0x09F3 - Gen3 Root port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen3RootPortPreset[20]; + +/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen4RootPortPreset[20]; + +/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen3EndPointPreset[20]; + +/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen4EndPointPreset[20]; + +/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane + Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen3EndPointHint[20]; + +/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane + Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen4EndPointHint[20]; + +/** Offset 0x0A6B - CPU PCIe Fia Programming + Load Fia configuration if enable. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieFiaProgramming; + +/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating + Describes whether the PCI Express Clock Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieClockGating; + +/** Offset 0x0A6D - CPU PCIe RootPort Power Gating + Describes whether the PCI Express Power Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPciePowerGating; + +/** Offset 0x0A6E - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 CpuPcieComplianceTestMode; + +/** Offset 0x0A6F - PCIE Secure Register Lock + Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled, + load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 CpuPcieSetSecuredRegisterLock; + +/** Offset 0x0A70 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 CpuPcieEnablePeerMemoryWrite; + +/** Offset 0x0A71 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 CpuPcieRpFunctionSwap; + +/** Offset 0x0A72 - PCI Express Slot Selection + Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default). + $EN_DIS +**/ + UINT8 CpuPcieSlotSelection; + +/** Offset 0x0A73 +**/ + UINT8 UnusedUpdSpace28; + +/** Offset 0x0A74 - CPU PCIE device override table pointer + The PCIe device table is being used to override PCIe device ASPM settings. This + is a pointer points to a 32bit address. And it's only used in PostMem phase. Please + refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId + must be 0. +**/ + UINT32 CpuPcieDeviceOverrideTablePtr; + +/** Offset 0x0A78 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 CpuPcieRpHotPlug[4]; + +/** Offset 0x0A7C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 CpuPcieRpPmSci[4]; + +/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 CpuPcieRpTransmitterHalfSwing[4]; + +/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 CpuPcieRpAcsEnabled[4]; + +/** Offset 0x0A88 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 CpuPcieRpEnableCpm[4]; + +/** Offset 0x0A8C - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 CpuPcieRpAdvancedErrorReporting[4]; + +/** Offset 0x0A90 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 CpuPcieRpUnsupportedRequestReport[4]; + +/** Offset 0x0A94 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpFatalErrorReport[4]; + +/** Offset 0x0A98 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpNoFatalErrorReport[4]; + +/** Offset 0x0A9C - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 CpuPcieRpCorrectableErrorReport[4]; + +/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnFatalError[4]; + +/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnNonFatalError[4]; + +/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnCorrectableError[4]; + +/** Offset 0x0AAC - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD. +**/ + UINT8 CpuPcieRpMaxPayload[4]; + +/** Offset 0x0AB0 - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcEnabled[4]; + +/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcExtensionsEnabled[4]; + +/** Offset 0x0AB8 - CPU PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 CpuPcieRpSlotImplemented[4]; + +/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen3EqPh3Method[4]; + +/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method + PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen4EqPh3Method[4]; + +/** Offset 0x0AC4 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 CpuPcieRpPhysicalSlotNumber[4]; + +/** Offset 0x0AC8 - PCIE RP Aspm + The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable; + 2: CpuPcieAspmL1(Default) +**/ + UINT8 CpuPcieRpAspm[4]; + +/** Offset 0x0ACC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). + Default is CpuPcieL1SubstatesL1_1_2. +**/ + UINT8 CpuPcieRpL1Substates[4]; + +/** Offset 0x0AD0 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 CpuPcieRpLtrEnable[4]; + +/** Offset 0x0AD4 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 CpuPcieRpLtrConfigLock[4]; + +/** Offset 0x0AD8 - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. [ALIAS_NAME RpPtmBytes] +**/ + UINT8 CpuPcieRpPtmEnabled[4]; + +/** Offset 0x0ADC - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 CpuPcieRpDetectTimeoutMs[4]; + +/** Offset 0x0AE4 - VC for PCIE RP Mask + Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpVcEnabled[4]; + +/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask + Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpMultiVcEnabled[4]; + +/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], Default + = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x0B3C - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x0B3D - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x0B3F - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0B40 - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x0B41 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x0B42 - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x0B43 - Enable/Disable CdClock Init + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock if not initialized by Gfx PEIM + $EN_DIS +**/ + UINT8 SkipCdClockInit; + +/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met) + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 RC1pFreqEnable; + +/** Offset 0x0B45 - Enable TSN Multi-VC + Enable/disable Multi Virtual Channels(VC) in TSN. + $EN_DIS +**/ + UINT8 PchTsnMultiVcEnable; + +/** Offset 0x0B46 - SaPostMemTestRsvd + Reserved for SA Post-Mem Test + $EN_DIS +**/ + UINT8 SaPostMemTestRsvd[13]; + +/** Offset 0x0B53 - RSR feature + Enable or Disable RSR feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableRsr; + +/** Offset 0x0B54 - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x0B55 - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x0B56 - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x0B57 - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x0B58 - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; 1: Enable; + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x0B59 - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; 1: Enabled 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x0B5A - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x0B5B - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. 0 : Disable; 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x0B5C - Turbo settings Lock + Lock all Turbo settings Enable/Disable; 0: Disable , 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x0B5D - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x0B5E - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x0B5F - Package PL3 Lock + Package PL3 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x0B60 - Package PL4 Lock + Package PL4 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x0B61 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + 10, For all other SKUs the recommended default are 0 +**/ + UINT8 TccActivationOffset; + +/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For SKL Y SKU, the recommended default for this policy is 1: Enabled, + For all other SKUs the recommended default are 0: Disabled. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x0B63 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x0B64 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x0B65 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x0B66 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x0B67 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x0B68 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x0B69 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x0B6A - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x0B6B - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x0B6C - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x0B6D - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x0B6E - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x0B6F - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x0B70 - PL1 Enable value + PL1 Enable value to limit average platform power. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x0B71 - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x0B72 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0B76 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; 2: MWAIT loop; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x0B78 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; 0: Single Range Output; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0B79 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x0B7D - Enable or Disable T states + Enable or Disable T states; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0B80 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0B81 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0B82 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableAllThermalFunctions; + +/** Offset 0x0B83 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x0B84 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0B85 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x0B86 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x0B89 - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x0B8A - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0B8C - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0B8D - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x0B8E - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0B8F - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0B90 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0B91 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0B92 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0B93 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x0B94 - Lock prochot configuration + Lock prochot configuration Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x0B95 - Configuration for boot TDP selection + Deprecated. Move to premem. +**/ + UINT8 DeprecatedConfigTdpLevel; + +/** Offset 0x0B96 - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x0B97 - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0BCF +**/ + UINT8 UnusedUpdSpace29; + +/** Offset 0x0BD0 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0BDC - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0BE0 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x0BE4 - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0BE8 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0BEC - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0C08 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0C0C - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0C10 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; 1: Enable + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0C11 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x0C13 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0C14 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0C15 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0C16 - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver + @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0C1B - Minimum Ring ratio limit override + Minimum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0C1C - Maximum Ring ratio limit override + Maximum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0C1D - Enable or Disable Per Core P State OS control + Enable or Disable Per Core P State OS control. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control + Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; 1: + Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping + Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x0C20 - Enable or Disable EPB override over PECI + Enable or Disable EPB override over PECI. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableEpbPeciOverride; + +/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST + Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableFastMsrHwpReq; + +/** Offset 0x0C22 - Enable Configurable TDP + Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP; + 1: Applies to cTDP + $EN_DIS +**/ + UINT8 ApplyConfigTdp; + +/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration + Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs. + $EN_DIS +**/ + UINT8 VccInDemotionOverride; + +/** Offset 0x0C24 - Customize the VccIn Demotion in ms. + Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be + in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on. + Value 0 will disable VccIn Demotion knob. It's 30ms by silicon default +**/ + UINT32 VccInDemotionMs; + +/** Offset 0x0C28 - ReservedCpuPostMemTest + Reserved for CPU Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedCpuPostMemTest[11]; + +/** Offset 0x0C33 - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x0C34 +**/ + UINT8 SecurityPostMemRsvd[16]; + +/** Offset 0x0C44 - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0C45 - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x0C46 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x0C48 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x0C49 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x0D82 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0DB4 - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0DB5 - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0DB7 - Low Power Mode Enable/Disable config mask + Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds + to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, + LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. [ALIAS_NAME LpmStateEnableMask] +**/ + UINT8 PmcLpmS0ixSubStateEnableMask; + +/** Offset 0x0DB8 - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x0DB9 +**/ + UINT8 UnusedUpdSpace30[1]; + +/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxSnoopLatency[4]; + +/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4]; + +/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Uptp[4]; + +/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Dptp[4]; + +/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 8. +**/ + UINT8 CpuPcieRpGen4Uptp[4]; + +/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 9. +**/ + UINT8 CpuPcieRpGen4Dptp[4]; + +/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable + Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs + $EN_DIS +**/ + UINT8 PmcC10DynamicThresholdAdjustment; + +/** Offset 0x0DFB - FOMS Control Policy + Choose the Foms Control Policy, Default = 0 + 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms +**/ + UINT8 CpuPcieFomsCp[4]; + +/** Offset 0x0DFF +**/ + UINT8 UnusedUpdSpace31; + +/** Offset 0x0E00 - LogoPixelHeight Address + Address of LogoPixelHeight +**/ + UINT32 LogoPixelHeight; + +/** Offset 0x0E04 - LogoPixelWidth Address + Address of LogoPixelWidth +**/ + UINT32 LogoPixelWidth; + +/** Offset 0x0E08 - P2P mode for PCIE RP + Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable. + 0: Disable, 1: Enable +**/ + UINT8 CpuPcieRpPeerToPeerMode[4]; + +/** Offset 0x0E0C - Map port under VMD + Map/UnMap port under VMD + $EN_DIS +**/ + UINT8 VmdPort[31]; + +/** Offset 0x0E2B - VMD Port Device + VMD Root port device number. +**/ + UINT8 VmdPortDev[31]; + +/** Offset 0x0E4A - VMD Port Func + VMD Root port function number. +**/ + UINT8 VmdPortFunc[31]; + +/** Offset 0x0E69 +**/ + UINT8 UnusedUpdSpace32[3]; + +/** Offset 0x0E6C - VMD Variable + VMD Variable Pointer. +**/ + UINT32 VmdVariablePtr; + +/** Offset 0x0E70 - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 TdcTimeWindow1[5]; + +/** Offset 0x0E84 - Temporary CfgBar address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdCfgBarBase; + +/** Offset 0x0E88 - Temporary MemBar1 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar1Base; + +/** Offset 0x0E8C - Temporary MemBar2 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar2Base; + +/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits + Set TSN1 MAC Address High. +**/ + UINT32 PchTsn1MacAddressHigh; + +/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits + Set TSN1 MAC Address Low. +**/ + UINT32 PchTsn1MacAddressLow; + +/** Offset 0x0E98 - FspEventHandler + Optional pointer to the boot loader's implementation of FSP_EVENT_HANDLER. +**/ + UINT32 FspEventHandler; + +/** Offset 0x0E9C - Enable VMD Global Mapping + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdGlobalMapping; + +/** Offset 0x0E9D +**/ + UINT8 UnusedUpdSpace33[3]; + +/** Offset 0x0EA0 +**/ + UINT8 ReservedFspsUpd[8]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0EA8 +**/ + UINT8 UnusedUpdSpace34[6]; + +/** Offset 0x0EAE +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/models/darp7/FSP/Include/FsptUpd.h b/models/darp7/FSP/Include/FsptUpd.h new file mode 100644 index 0000000..593ecf4 --- /dev/null +++ b/models/darp7/FSP/Include/FsptUpd.h @@ -0,0 +1,311 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include + +#pragma pack(1) + + +/** Fsp T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionSize; + +/** Offset 0x0030 +**/ + UINT8 Reserved[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - PcdSerialIoUartDebugEnable + Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIoUartDebugEnable; + +/** Offset 0x0041 - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0042 - PcdSerialIoUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIoUartMode; + +/** Offset 0x0043 +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIoUartBaudRate; + +/** Offset 0x0048 - Pci Express Base Address + Base address to be programmed for Pci Express +**/ + UINT64 PcdPciExpressBaseAddress; + +/** Offset 0x0050 - Pci Express Region Length + Region Length to be programmed for Pci Express +**/ + UINT32 PcdPciExpressRegionLength; + +/** Offset 0x0054 - PcdSerialIoUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIoUartParity; + +/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIoUartDataBits; + +/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIoUartStopBits; + +/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIoUartAutoFlow; + +/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartRxPinMux; + +/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartTxPinMux; + +/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIoUartRtsPinMux; + +/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIoUartCtsPinMux; + +/** Offset 0x0068 - PcdSerialIoUartDebugMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIoUartDebugMmioBase; + +/** Offset 0x006C - PcdLpcUartDebugEnable + Enable to initialize LPC Uart device in FSP. + 0:Disable, 1:Enable +**/ + UINT8 PcdLpcUartDebugEnable; + +/** Offset 0x006D - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x006E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x006F - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0070 - PcdSerialIo2ndUartEnable + Enable Additional SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIo2ndUartEnable; + +/** Offset 0x0071 - PcdSerialIo2ndUartNumber + Select SerialIo Uart Controller Number + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIo2ndUartNumber; + +/** Offset 0x0072 - PcdSerialIo2ndUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIo2ndUartMode; + +/** Offset 0x0073 +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x0074 - PcdSerialIo2ndUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIo2ndUartBaudRate; + +/** Offset 0x0078 - PcdSerialIo2ndUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIo2ndUartParity; + +/** Offset 0x0079 - PcdSerialIo2ndUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIo2ndUartDataBits; + +/** Offset 0x007A - PcdSerialIo2ndUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIo2ndUartStopBits; + +/** Offset 0x007B - PcdSerialIo2ndUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIo2ndUartAutoFlow; + +/** Offset 0x007C - PcdSerialIo2ndUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartRxPinMux; + +/** Offset 0x0080 - PcdSerialIo2ndUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartTxPinMux; + +/** Offset 0x0084 - PcdSerialIo2ndUartRtsPinMux - FSPT + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartRtsPinMux; + +/** Offset 0x0088 - PcdSerialIo2ndUartCtsPinMux - FSPT + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartCtsPinMux; + +/** Offset 0x008C - PcdSerialIo2ndUartMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIo2ndUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIo2ndUartMmioBase; + +/** Offset 0x0090 +**/ + UINT32 TopMemoryCacheSize; + +/** Offset 0x0094 - FspDebugHandler + Optional pointer to the boot loader's implementation of FSP_DEBUG_HANDLER. +**/ + UINT32 FspDebugHandler; + +/** Offset 0x0098 +**/ + UINT8 UnusedUpdSpace2[4]; + +/** Offset 0x009C +**/ + UINT8 ReservedFsptUpd1[20]; +} FSP_T_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSP_T_CONFIG FsptConfig; + +/** Offset 0x00B0 +**/ + UINT8 UnusedUpdSpace3[6]; + +/** Offset 0x00B6 +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/models/darp7/FSP/Include/FusaInfoHob.h b/models/darp7/FSP/Include/FusaInfoHob.h new file mode 100644 index 0000000..0d6a953 --- /dev/null +++ b/models/darp7/FSP/Include/FusaInfoHob.h @@ -0,0 +1,161 @@ +/** @file + This file contains definitions required for creation of TGL + end-to-end check-the-checker test result hob. + +@copyright + INTEL CONFIDENTIAL Copyright 2020 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ +#ifndef _FUSA_INFO_HOB_H_ +#define _FUSA_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiFusaInfoGuid; + +/** + FuSa Info HOB version + Use this to compare to the HOB retrieved from the FSP for the + exact match +**/ +#define FUSA_INFO_VERSION 0x00000100 + +/** Constants used for FUSA_TEST_RESULT->CheckResults[] and + * FUSA_TEST_RESULT->TestResult */ +/**@defgroup ResultConstant Check Result Constants*/ +/**@{*/ +#define FUSA_TEST_DEVICE_NOTAVAILABLE 0xFF /**TestNumber will have this value. + + @note While the core4-7 (cbo4-7) that are strictly related to + the TGL-H are listed, there are not within the + implementation scope and validation scope yet. +**/ +typedef enum +{ + FusaTestNumMc0Cmi = 0, /// + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __GPIOCONFIG_H__ +#define __GPIOCONFIG_H__ +#include +#include +#include + +/* + SKL LP GPIO pins + Use below for functions from PCH GPIO Lib which + require GpioPad as argument. Encoding used here + has all information required by library functions +*/ +#define GPIO_SKL_LP_GPP_A0 0x02000000 +#define GPIO_SKL_LP_GPP_A1 0x02000001 +#define GPIO_SKL_LP_GPP_A2 0x02000002 +#define GPIO_SKL_LP_GPP_A3 0x02000003 +#define GPIO_SKL_LP_GPP_A4 0x02000004 +#define GPIO_SKL_LP_GPP_A5 0x02000005 +#define GPIO_SKL_LP_GPP_A6 0x02000006 +#define GPIO_SKL_LP_GPP_A7 0x02000007 +#define GPIO_SKL_LP_GPP_A8 0x02000008 +#define GPIO_SKL_LP_GPP_A9 0x02000009 +#define GPIO_SKL_LP_GPP_A10 0x0200000A +#define GPIO_SKL_LP_GPP_A11 0x0200000B +#define GPIO_SKL_LP_GPP_A12 0x0200000C +#define GPIO_SKL_LP_GPP_A13 0x0200000D +#define GPIO_SKL_LP_GPP_A14 0x0200000E +#define GPIO_SKL_LP_GPP_A15 0x0200000F +#define GPIO_SKL_LP_GPP_A16 0x02000010 +#define GPIO_SKL_LP_GPP_A17 0x02000011 +#define GPIO_SKL_LP_GPP_A18 0x02000012 +#define GPIO_SKL_LP_GPP_A19 0x02000013 +#define GPIO_SKL_LP_GPP_A20 0x02000014 +#define GPIO_SKL_LP_GPP_A21 0x02000015 +#define GPIO_SKL_LP_GPP_A22 0x02000016 +#define GPIO_SKL_LP_GPP_A23 0x02000017 +#define GPIO_SKL_LP_GPP_B0 0x02010000 +#define GPIO_SKL_LP_GPP_B1 0x02010001 +#define GPIO_SKL_LP_GPP_B2 0x02010002 +#define GPIO_SKL_LP_GPP_B3 0x02010003 +#define GPIO_SKL_LP_GPP_B4 0x02010004 +#define GPIO_SKL_LP_GPP_B5 0x02010005 +#define GPIO_SKL_LP_GPP_B6 0x02010006 +#define GPIO_SKL_LP_GPP_B7 0x02010007 +#define GPIO_SKL_LP_GPP_B8 0x02010008 +#define GPIO_SKL_LP_GPP_B9 0x02010009 +#define GPIO_SKL_LP_GPP_B10 0x0201000A +#define GPIO_SKL_LP_GPP_B11 0x0201000B +#define GPIO_SKL_LP_GPP_B12 0x0201000C +#define GPIO_SKL_LP_GPP_B13 0x0201000D +#define GPIO_SKL_LP_GPP_B14 0x0201000E +#define GPIO_SKL_LP_GPP_B15 0x0201000F +#define GPIO_SKL_LP_GPP_B16 0x02010010 +#define GPIO_SKL_LP_GPP_B17 0x02010011 +#define GPIO_SKL_LP_GPP_B18 0x02010012 +#define GPIO_SKL_LP_GPP_B19 0x02010013 +#define GPIO_SKL_LP_GPP_B20 0x02010014 +#define GPIO_SKL_LP_GPP_B21 0x02010015 +#define GPIO_SKL_LP_GPP_B22 0x02010016 +#define GPIO_SKL_LP_GPP_B23 0x02010017 +#define GPIO_SKL_LP_GPP_C0 0x02020000 +#define GPIO_SKL_LP_GPP_C1 0x02020001 +#define GPIO_SKL_LP_GPP_C2 0x02020002 +#define GPIO_SKL_LP_GPP_C3 0x02020003 +#define GPIO_SKL_LP_GPP_C4 0x02020004 +#define GPIO_SKL_LP_GPP_C5 0x02020005 +#define GPIO_SKL_LP_GPP_C6 0x02020006 +#define GPIO_SKL_LP_GPP_C7 0x02020007 +#define GPIO_SKL_LP_GPP_C8 0x02020008 +#define GPIO_SKL_LP_GPP_C9 0x02020009 +#define GPIO_SKL_LP_GPP_C10 0x0202000A +#define GPIO_SKL_LP_GPP_C11 0x0202000B +#define GPIO_SKL_LP_GPP_C12 0x0202000C +#define GPIO_SKL_LP_GPP_C13 0x0202000D +#define GPIO_SKL_LP_GPP_C14 0x0202000E +#define GPIO_SKL_LP_GPP_C15 0x0202000F +#define GPIO_SKL_LP_GPP_C16 0x02020010 +#define GPIO_SKL_LP_GPP_C17 0x02020011 +#define GPIO_SKL_LP_GPP_C18 0x02020012 +#define GPIO_SKL_LP_GPP_C19 0x02020013 +#define GPIO_SKL_LP_GPP_C20 0x02020014 +#define GPIO_SKL_LP_GPP_C21 0x02020015 +#define GPIO_SKL_LP_GPP_C22 0x02020016 +#define GPIO_SKL_LP_GPP_C23 0x02020017 +#define GPIO_SKL_LP_GPP_D0 0x02030000 +#define GPIO_SKL_LP_GPP_D1 0x02030001 +#define GPIO_SKL_LP_GPP_D2 0x02030002 +#define GPIO_SKL_LP_GPP_D3 0x02030003 +#define GPIO_SKL_LP_GPP_D4 0x02030004 +#define GPIO_SKL_LP_GPP_D5 0x02030005 +#define GPIO_SKL_LP_GPP_D6 0x02030006 +#define GPIO_SKL_LP_GPP_D7 0x02030007 +#define GPIO_SKL_LP_GPP_D8 0x02030008 +#define GPIO_SKL_LP_GPP_D9 0x02030009 +#define GPIO_SKL_LP_GPP_D10 0x0203000A +#define GPIO_SKL_LP_GPP_D11 0x0203000B +#define GPIO_SKL_LP_GPP_D12 0x0203000C +#define GPIO_SKL_LP_GPP_D13 0x0203000D +#define GPIO_SKL_LP_GPP_D14 0x0203000E +#define GPIO_SKL_LP_GPP_D15 0x0203000F +#define GPIO_SKL_LP_GPP_D16 0x02030010 +#define GPIO_SKL_LP_GPP_D17 0x02030011 +#define GPIO_SKL_LP_GPP_D18 0x02030012 +#define GPIO_SKL_LP_GPP_D19 0x02030013 +#define GPIO_SKL_LP_GPP_D20 0x02030014 +#define GPIO_SKL_LP_GPP_D21 0x02030015 +#define GPIO_SKL_LP_GPP_D22 0x02030016 +#define GPIO_SKL_LP_GPP_D23 0x02030017 +#define GPIO_SKL_LP_GPP_E0 0x02040000 +#define GPIO_SKL_LP_GPP_E1 0x02040001 +#define GPIO_SKL_LP_GPP_E2 0x02040002 +#define GPIO_SKL_LP_GPP_E3 0x02040003 +#define GPIO_SKL_LP_GPP_E4 0x02040004 +#define GPIO_SKL_LP_GPP_E5 0x02040005 +#define GPIO_SKL_LP_GPP_E6 0x02040006 +#define GPIO_SKL_LP_GPP_E7 0x02040007 +#define GPIO_SKL_LP_GPP_E8 0x02040008 +#define GPIO_SKL_LP_GPP_E9 0x02040009 +#define GPIO_SKL_LP_GPP_E10 0x0204000A +#define GPIO_SKL_LP_GPP_E11 0x0204000B +#define GPIO_SKL_LP_GPP_E12 0x0204000C +#define GPIO_SKL_LP_GPP_E13 0x0204000D +#define GPIO_SKL_LP_GPP_E14 0x0204000E +#define GPIO_SKL_LP_GPP_E15 0x0204000F +#define GPIO_SKL_LP_GPP_E16 0x02040010 +#define GPIO_SKL_LP_GPP_E17 0x02040011 +#define GPIO_SKL_LP_GPP_E18 0x02040012 +#define GPIO_SKL_LP_GPP_E19 0x02040013 +#define GPIO_SKL_LP_GPP_E20 0x02040014 +#define GPIO_SKL_LP_GPP_E21 0x02040015 +#define GPIO_SKL_LP_GPP_E22 0x02040016 +#define GPIO_SKL_LP_GPP_E23 0x02040017 +#define GPIO_SKL_LP_GPP_F0 0x02050000 +#define GPIO_SKL_LP_GPP_F1 0x02050001 +#define GPIO_SKL_LP_GPP_F2 0x02050002 +#define GPIO_SKL_LP_GPP_F3 0x02050003 +#define GPIO_SKL_LP_GPP_F4 0x02050004 +#define GPIO_SKL_LP_GPP_F5 0x02050005 +#define GPIO_SKL_LP_GPP_F6 0x02050006 +#define GPIO_SKL_LP_GPP_F7 0x02050007 +#define GPIO_SKL_LP_GPP_F8 0x02050008 +#define GPIO_SKL_LP_GPP_F9 0x02050009 +#define GPIO_SKL_LP_GPP_F10 0x0205000A +#define GPIO_SKL_LP_GPP_F11 0x0205000B +#define GPIO_SKL_LP_GPP_F12 0x0205000C +#define GPIO_SKL_LP_GPP_F13 0x0205000D +#define GPIO_SKL_LP_GPP_F14 0x0205000E +#define GPIO_SKL_LP_GPP_F15 0x0205000F +#define GPIO_SKL_LP_GPP_F16 0x02050010 +#define GPIO_SKL_LP_GPP_F17 0x02050011 +#define GPIO_SKL_LP_GPP_F18 0x02050012 +#define GPIO_SKL_LP_GPP_F19 0x02050013 +#define GPIO_SKL_LP_GPP_F20 0x02050014 +#define GPIO_SKL_LP_GPP_F21 0x02050015 +#define GPIO_SKL_LP_GPP_F22 0x02050016 +#define GPIO_SKL_LP_GPP_F23 0x02050017 +#define GPIO_SKL_LP_GPP_G0 0x02060000 +#define GPIO_SKL_LP_GPP_G1 0x02060001 +#define GPIO_SKL_LP_GPP_G2 0x02060002 +#define GPIO_SKL_LP_GPP_G3 0x02060003 +#define GPIO_SKL_LP_GPP_G4 0x02060004 +#define GPIO_SKL_LP_GPP_G5 0x02060005 +#define GPIO_SKL_LP_GPP_G6 0x02060006 +#define GPIO_SKL_LP_GPP_G7 0x02060007 +#define GPIO_SKL_LP_GPD0 0x02070000 +#define GPIO_SKL_LP_GPD1 0x02070001 +#define GPIO_SKL_LP_GPD2 0x02070002 +#define GPIO_SKL_LP_GPD3 0x02070003 +#define GPIO_SKL_LP_GPD4 0x02070004 +#define GPIO_SKL_LP_GPD5 0x02070005 +#define GPIO_SKL_LP_GPD6 0x02070006 +#define GPIO_SKL_LP_GPD7 0x02070007 +#define GPIO_SKL_LP_GPD8 0x02070008 +#define GPIO_SKL_LP_GPD9 0x02070009 +#define GPIO_SKL_LP_GPD10 0x0207000A +#define GPIO_SKL_LP_GPD11 0x0207000B + +#define END_OF_GPIO_TABLE 0xFFFFFFFF + +//Sample GPIO Table + +static GPIO_INIT_CONFIG mGpioTableLpDdr3Rvp3[] = +{ +//skip for eSPI function {GPIO_SKL_LP_GPP_A0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//H_RCIN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD0_ESPI_IO0 +//skip for eSPI function {GPIO_SKL_LP_GPP_A2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD1_ESPI_IO1 +//skip for eSPI function {GPIO_SKL_LP_GPP_A3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD2_ESPI_IO2 +//skip for eSPI function {GPIO_SKL_LP_GPP_A4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD3_ESPI_IO3 +//skip for eSPI function {GPIO_SKL_LP_GPP_A5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//LPC_FRAME_ESPI_CS_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//INT_SERIRQ +//skip for eSPI function {GPIO_SKL_LP_GPP_A7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SLP_S0ix_R_N + {GPIO_SKL_LP_GPP_A8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_CLKRUN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_CLK_ESPI_CLK + {GPIO_SKL_LP_GPP_A10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//PCH_CLK_PCI_TPM + {GPIO_SKL_LP_GPP_A11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//EC_HID_INTR + {GPIO_SKL_LP_GPP_A12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//M.2_WWAN_GNSS_UART_RST_N + {GPIO_SKL_LP_GPP_A13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SUS_PWR_ACK_R +//skip for eSPI function {GPIO_SKL_LP_GPP_A14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SUS_STAT_ESPI_RST_N + {GPIO_SKL_LP_GPP_A15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SUSACK_R_N + {GPIO_SKL_LP_GPP_A16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_1P8_SEL + {GPIO_SKL_LP_GPP_A17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_PWR_EN_N + {GPIO_SKL_LP_GPP_A18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_0_SENSOR + {GPIO_SKL_LP_GPP_A19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_1_SENSOR + {GPIO_SKL_LP_GPP_A20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_2_SENSOR + {GPIO_SKL_LP_GPP_A21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GNSS_CHUB_IRQ + {GPIO_SKL_LP_GPP_A22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_SLP_N + {GPIO_SKL_LP_GPP_A23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//FPS_DRDY + {GPIO_SKL_LP_GPP_B0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID0 + {GPIO_SKL_LP_GPP_B1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID1 + {GPIO_SKL_LP_GPP_B2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GP_VRALERTB + {GPIO_SKL_LP_GPP_B3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioPlatformReset, GpioTermNone}},//TCH_PAD_INTR_R_N + {GPIO_SKL_LP_GPP_B4, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//BT_RF_KILL_N + {GPIO_SKL_LP_GPP_B5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_BT_UART_WAKE_N + // {GPIO_SKL_LP_GPP_B6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT1_N + // {GPIO_SKL_LP_GPP_B7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT2_LAN_N + // {GPIO_SKL_LP_GPP_B8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_SSD_SLOT3_N + // {GPIO_SKL_LP_GPP_B9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WIGIG_N + // {GPIO_SKL_LP_GPP_B10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WLAN_N + {GPIO_SKL_LP_GPP_B11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//MPHY_EXT_PWR_GATEB + {GPIO_SKL_LP_GPP_B12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SLP_S0_N + {GPIO_SKL_LP_GPP_B13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PLT_RST_N + {GPIO_SKL_LP_GPP_B14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_PWREN + {GPIO_SKL_LP_GPP_B15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_DFU + {GPIO_SKL_LP_GPP_B16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//M.2_WLAN_WIFI_WAKE_N + {GPIO_SKL_LP_GPP_B17, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSci, GpioHostDeepReset, GpioTermWpd20K}},//TBT_CIO_PLUG_EVENT_N + {GPIO_SKL_LP_GPP_B18, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermWpu20K}},//PCH_SLOT1_WAKE_N + {GPIO_SKL_LP_GPP_B19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_GSPI1_CS_R1_N + {GPIO_SKL_LP_GPP_B20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_CLK_R1 + {GPIO_SKL_LP_GPP_B21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MISO_R1 + {GPIO_SKL_LP_GPP_B22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MOSI_R1 + {GPIO_SKL_LP_GPP_B23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DISCRETE_GNSS_RESET_N + {GPIO_SKL_LP_GPP_C0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SMB_CLK + {GPIO_SKL_LP_GPP_C1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SMB_DATA + {GPIO_SKL_LP_GPP_C2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SKIN_THRM_SNSR_ALERT_N + {GPIO_SKL_LP_GPP_C3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_CLK + {GPIO_SKL_LP_GPP_C4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_DATA + {GPIO_SKL_LP_GPP_C5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermWpd20K}},//M.2_WIGIG_WAKE_N + {GPIO_SKL_LP_GPP_C6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML1_CLK + {GPIO_SKL_LP_GPP_C7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SML1_DATA + {GPIO_SKL_LP_GPP_C8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RXD + {GPIO_SKL_LP_GPP_C9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_TXD + {GPIO_SKL_LP_GPP_C10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RTS_N + {GPIO_SKL_LP_GPP_C11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_CTS_N + {GPIO_SKL_LP_GPP_C12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RXD + {GPIO_SKL_LP_GPP_C13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_TXD + {GPIO_SKL_LP_GPP_C14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RTS_N + {GPIO_SKL_LP_GPP_C15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_CTS_N + {GPIO_SKL_LP_GPP_C16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SDA + {GPIO_SKL_LP_GPP_C17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SCL + {GPIO_SKL_LP_GPP_C18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SDA + {GPIO_SKL_LP_GPP_C19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SCL + {GPIO_SKL_LP_GPP_C20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RXD + {GPIO_SKL_LP_GPP_C21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_TXD + {GPIO_SKL_LP_GPP_C22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RTS_N + {GPIO_SKL_LP_GPP_C23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_CTS_N + {GPIO_SKL_LP_GPP_D0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CS_N + {GPIO_SKL_LP_GPP_D1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CLK + {GPIO_SKL_LP_GPP_D2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MISO + {GPIO_SKL_LP_GPP_D3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MOSI + {GPIO_SKL_LP_GPP_D4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CSI2_FLASH_STROBE + {GPIO_SKL_LP_GPP_D5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SDA + {GPIO_SKL_LP_GPP_D6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SCL + {GPIO_SKL_LP_GPP_D7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SDA + {GPIO_SKL_LP_GPP_D8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SCL + {GPIO_SKL_LP_GPP_D9, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//HOME_BTN + {GPIO_SKL_LP_GPP_D10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SCREEN_LOCK_PCH + {GPIO_SKL_LP_GPP_D11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_UP_PCH + {GPIO_SKL_LP_GPP_D12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_DOWN_PCH + {GPIO_SKL_LP_GPP_D13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RXD_SML0B_DATA + {GPIO_SKL_LP_GPP_D14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_TXD_SML0B_CLK + {GPIO_SKL_LP_GPP_D15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RTS_N + {GPIO_SKL_LP_GPP_D16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_CTS_SML0B_ALERT_N + {GPIO_SKL_LP_GPP_D17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_1 + {GPIO_SKL_LP_GPP_D18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_1 + {GPIO_SKL_LP_GPP_D19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_0 + {GPIO_SKL_LP_GPP_D20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_0 + {GPIO_SKL_LP_GPP_D21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO2 + {GPIO_SKL_LP_GPP_D22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO3 + {GPIO_SKL_LP_GPP_D23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP_MCLK + {GPIO_SKL_LP_GPP_E0, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//SPI_TPM_HDR_IRQ_N + {GPIO_SKL_LP_GPP_E1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA_ODD_PRSNT_N + {GPIO_SKL_LP_GPP_E2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntLvlEdgDis | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_SSD_SATA2_PCIE3_DET_N + {GPIO_SKL_LP_GPP_E3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioResumeReset, GpioTermNone}},//EINK_SSR_DFU_N + {GPIO_SKL_LP_GPP_E4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_RESET + {GPIO_SKL_LP_GPP_E5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA1_PHYSLP1_DIRECT_R + {GPIO_SKL_LP_GPP_E6, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA2_PHYSLP2_M.2SSD_R + {GPIO_SKL_LP_GPP_E8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SATA_LED_N + {GPIO_SKL_LP_GPP_E9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_0_WP1_OTG_N + {GPIO_SKL_LP_GPP_E10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_1_WP4_N + {GPIO_SKL_LP_GPP_E11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_2_WP2_WP3_WP5_R_N + {GPIO_SKL_LP_GPP_E12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_IRQ + {GPIO_SKL_LP_GPP_E13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_HPD_Q + {GPIO_SKL_LP_GPP_E14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_HPD_Q + {GPIO_SKL_LP_GPP_E15, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSmi, GpioHostDeepReset, GpioTermNone}},//SMC_EXTSMI_R_N + {GPIO_SKL_LP_GPP_E16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//SMC_RUNTIME_SCI_R_N + {GPIO_SKL_LP_GPP_E17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EDP_HPD + {GPIO_SKL_LP_GPP_E18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_CTRL_CLK + {GPIO_SKL_LP_GPP_E19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI1_CTRL_DATA + {GPIO_SKL_LP_GPP_E20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_CTRL_CLK + {GPIO_SKL_LP_GPP_E21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI2_CTRL_DATA + {GPIO_SKL_LP_GPP_E22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_CODEC_IRQ + {GPIO_SKL_LP_GPP_E23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_RST_N + {GPIO_SKL_LP_GPP_F0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SCLK + {GPIO_SKL_LP_GPP_F1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SFRM + {GPIO_SKL_LP_GPP_F2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_TXD + {GPIO_SKL_LP_GPP_F3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_RXD + {GPIO_SKL_LP_GPP_F4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SDA + {GPIO_SKL_LP_GPP_F5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SCL + {GPIO_SKL_LP_GPP_F6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SDA + {GPIO_SKL_LP_GPP_F7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SCL + {GPIO_SKL_LP_GPP_F8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SDA + {GPIO_SKL_LP_GPP_F9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SCL + {GPIO_SKL_LP_GPP_F10, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SDA + {GPIO_SKL_LP_GPP_F11, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SCL + {GPIO_SKL_LP_GPP_F12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CMD + {GPIO_SKL_LP_GPP_F13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA0 + {GPIO_SKL_LP_GPP_F14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA1 + {GPIO_SKL_LP_GPP_F15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA2 + {GPIO_SKL_LP_GPP_F16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA3 + {GPIO_SKL_LP_GPP_F17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA4 + {GPIO_SKL_LP_GPP_F18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA5 + {GPIO_SKL_LP_GPP_F19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA6 + {GPIO_SKL_LP_GPP_F20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA7 + {GPIO_SKL_LP_GPP_F21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_RCLK + {GPIO_SKL_LP_GPP_F22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CLK + {GPIO_SKL_LP_GPP_F23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_M.2_WWAN_UIM_SIM_DET + {GPIO_SKL_LP_GPP_G0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CMD + {GPIO_SKL_LP_GPP_G1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA0 + {GPIO_SKL_LP_GPP_G2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA1 + {GPIO_SKL_LP_GPP_G3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA2 + {GPIO_SKL_LP_GPP_G4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA3 + {GPIO_SKL_LP_GPP_G5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CDB + {GPIO_SKL_LP_GPP_G6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CLK + {GPIO_SKL_LP_GPP_G7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_WP + {GPIO_SKL_LP_GPD0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_BATLOW_R_N + {GPIO_SKL_LP_GPD1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//AC_PRESENT_R + {GPIO_SKL_LP_GPD2, {GpioPadModeNative1, GpioHostOwnAcpi, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioDswReset, GpioTermNone}},//LANWAKE_SMC_WAKE_SCI_N + {GPIO_SKL_LP_GPD3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermWpu20K}},//PM_PWRBTN_R_N + {GPIO_SKL_LP_GPD4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S3_R_N + {GPIO_SKL_LP_GPD5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S4_R_N + {GPIO_SKL_LP_GPD6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_M_R_N + {GPIO_SKL_LP_GPD7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//USB_WAKEOUT_INTRUDET_N + {GPIO_SKL_LP_GPD8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SUS_CLK + {GPIO_SKL_LP_GPD9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PCH_SLP_WLAN_N + {GPIO_SKL_LP_GPD10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S5_R_N + {GPIO_SKL_LP_GPD11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_LANPHY_ENABLE + {END_OF_GPIO_TABLE, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//Marking End of Table +}; + +#endif //_GPIO_CONFIG_H_ diff --git a/models/darp7/FSP/Include/MemInfoHob.h b/models/darp7/FSP/Include/MemInfoHob.h new file mode 100644 index 0000000..4ff8bf9 --- /dev/null +++ b/models/darp7/FSP/Include/MemInfoHob.h @@ -0,0 +1,286 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + + @copyright + Copyright (c) 1999 - 2020, Intel Corporation. All rights reserved.
+ This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License that accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_TRACE_CACHE_TYPE 3 + +#define MAX_NODE 2 +#define MAX_CH 4 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef __MRC_BOOT_MODE__ +#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h + #ifndef INT32_MAX + #define INT32_MAX (0x7FFFFFFF) + #endif //INT32_MAX +typedef enum { + bmCold, ///< Cold boot + bmWarm, ///< Warm boot + bmS3, ///< S3 resume + bmFast, ///< Fast boot + MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. + MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. +} MRC_BOOT_MODE; +#endif //__MRC_BOOT_MODE__ + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#ifndef MRC_DDR_TYPE_WIO2 +#define MRC_DDR_TYPE_WIO2 4 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 5 +#endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz + UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT64 BaseAddress; ///< Trace Base Address + UINT64 TotalSize; ///< Total Trace Region of Same Cache type + UINT8 CacheType; ///< Trace Cache Type + UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code + UINT8 Rsvd[2]; +} PSMI_MEM_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + Revision 1: + - Initial version. + Revision 2: + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT64 PrmrrBase; + UINT32 PramSize; + UINT64 PramBase; + UINT64 DismLimit; + UINT64 DismBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; + PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ diff --git a/models/darp7/FSP/LICENSE b/models/darp7/FSP/LICENSE new file mode 100644 index 0000000..9fddc58 --- /dev/null +++ b/models/darp7/FSP/LICENSE @@ -0,0 +1,46 @@ +************************************************************************ +** ** +** ** +** IMPORTANT - READ THIS BEFORE COPYING, INSTALLING OR USING ** +** ** +** ANY PORTION OF THE SOFTWARE ** +** ** +************************************************************************ + +Copyright (c) 2018 Intel Corporation. +All rights reserved. + +Redistribution. + +Redistribution and use in binary form, without modification, are permitted +provided that the following conditions are met: + +- Redistributions must reproduce the above copyright notice and the +following disclaimer in the documentation and/or other materials provided +with the distribution. + +- Neither the name of Intel Corporation nor the names of its suppliers +may be used to endorse or promote products derived from this software +without specific prior written permission. + +- No reverse engineering, decompilation, or disassembly of this software +is permitted. + +"Binary form" includes any format that is commonly used for electronic +conveyance that is a reversible, bit-exact translation of binary +representation to ASCII or ISO text, for example "uuencode". + +DISCLAIMER. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/models/darp7/IntelGopDriver.efi b/models/darp7/IntelGopDriver.efi new file mode 100644 index 0000000..1d87dee --- /dev/null +++ b/models/darp7/IntelGopDriver.efi @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8f7e52b39dd1f5dc9e36dcce6af0016ca419e957760e5fece5e4f90d167bdc +size 148416 diff --git a/models/darp7/IntelGopDriver.inf b/models/darp7/IntelGopDriver.inf new file mode 100644 index 0000000..39b2eb9 --- /dev/null +++ b/models/darp7/IntelGopDriver.inf @@ -0,0 +1,9 @@ +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = IntelGopDriver + FILE_GUID = 767222f4-a9f4-41ba-9faa-edaa1405a486 + MODULE_TYPE = UEFI_DRIVER + VERSION_STRING = 1.0 + +[Binaries.X64] + PE32|IntelGopDriver.efi|* diff --git a/models/darp7/README.md b/models/darp7/README.md new file mode 100644 index 0000000..4ad5364 --- /dev/null +++ b/models/darp7/README.md @@ -0,0 +1,12 @@ +# System76 Darter Pro (darp7) + +## Contents + +- [EC](./ec.rom) + - *Read Error: No such file or directory (os error 2)* +- [FD](./fd.rom) + - Size: 4 KB + - HAP: false +- [ME](./me.rom) + - Size: 5116 KB + - Version: 15.0.10.1447 diff --git a/models/darp7/README.md.in b/models/darp7/README.md.in new file mode 100644 index 0000000..34afb2b --- /dev/null +++ b/models/darp7/README.md.in @@ -0,0 +1 @@ +# System76 Darter Pro (darp7) diff --git a/models/darp7/coreboot-collector.txt b/models/darp7/coreboot-collector.txt new file mode 100644 index 0000000..418c7a7 --- /dev/null +++ b/models/darp7/coreboot-collector.txt @@ -0,0 +1,256 @@ +## PCI ## +PCI Device: 0000:00:00.0: Class 0x00060000, Vendor 0x8086, Device 0x9A14, Revision 0x01 +PCI Device: 0000:00:02.0: Class 0x00030000, Vendor 0x8086, Device 0x9A49, Revision 0x01 +PCI Device: 0000:00:04.0: Class 0x00118000, Vendor 0x8086, Device 0x9A03, Revision 0x01 +PCI Device: 0000:00:06.0: Class 0x00060400, Vendor 0x8086, Device 0x9A09, Revision 0x01 +PCI Device: 0000:00:07.0: Class 0x00060400, Vendor 0x8086, Device 0x9A23, Revision 0x01 +PCI Device: 0000:00:0a.0: Class 0x00118000, Vendor 0x8086, Device 0x9A0D, Revision 0x01 +PCI Device: 0000:00:0d.0: Class 0x000C0330, Vendor 0x8086, Device 0x9A13, Revision 0x01 +PCI Device: 0000:00:0d.2: Class 0x000C0340, Vendor 0x8086, Device 0x9A1B, Revision 0x01 +PCI Device: 0000:00:14.0: Class 0x000C0330, Vendor 0x8086, Device 0xA0ED, Revision 0x20 +PCI Device: 0000:00:14.2: Class 0x00050000, Vendor 0x8086, Device 0xA0EF, Revision 0x20 +PCI Device: 0000:00:14.3: Class 0x00028000, Vendor 0x8086, Device 0xA0F0, Revision 0x20 +PCI Device: 0000:00:15.0: Class 0x000C8000, Vendor 0x8086, Device 0xA0E8, Revision 0x20 +PCI Device: 0000:00:15.1: Class 0x000C8000, Vendor 0x8086, Device 0xA0E9, Revision 0x20 +PCI Device: 0000:00:15.2: Class 0x000C8000, Vendor 0x8086, Device 0xA0EA, Revision 0x20 +PCI Device: 0000:00:16.0: Class 0x00078000, Vendor 0x8086, Device 0xA0E0, Revision 0x20 +PCI Device: 0000:00:1c.0: Class 0x00060400, Vendor 0x8086, Device 0xA0BD, Revision 0x20 +PCI Device: 0000:00:1c.6: Class 0x00060400, Vendor 0x8086, Device 0xA0BE, Revision 0x20 +PCI Device: 0000:00:1f.0: Class 0x00060100, Vendor 0x8086, Device 0xA082, Revision 0x20 +PCI Device: 0000:00:1f.3: Class 0x00040300, Vendor 0x8086, Device 0xA0C8, Revision 0x20 +PCI Device: 0000:00:1f.4: Class 0x000C0500, Vendor 0x8086, Device 0xA0A3, Revision 0x20 +PCI Device: 0000:00:1f.5: Class 0x000C8000, Vendor 0x8086, Device 0xA0A4, Revision 0x20 +PCI Device: 0000:01:00.0: Class 0x00010802, Vendor 0x15B7, Device 0x5009, Revision 0x01 +PCI Device: 0000:34:00.0: Class 0x00FF0000, Vendor 0x10EC, Device 0x522A, Revision 0x01 +PCI Device: 0000:35:00.0: Class 0x00020000, Vendor 0x10EC, Device 0x8168, Revision 0x15 +## GPIO ## +500 Series PCH-LP +GPP_B0 (0x6E,0x00) 0x44000700 0x0003c018 0x00000100 0x00000000 +GPP_B1 (0x6E,0x02) 0x44000700 0x0003c019 0x00000100 0x00000000 +GPP_B2 (0x6E,0x04) 0x44000102 0x0000301a 0x00000000 0x00000000 +GPP_B3 (0x6E,0x06) 0x80800102 0x0000001b 0x00000000 0x00000000 +GPP_B4 (0x6E,0x08) 0x44000300 0x0000001c 0x00000000 0x00000000 +GPP_B5 (0x6E,0x0A) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_B6 (0x6E,0x0C) 0x44000300 0x0000001e 0x00000000 0x00000000 +GPP_B7 (0x6E,0x0E) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_B8 (0x6E,0x10) 0x44000201 0x00000020 0x00000000 0x00000000 +GPP_B9 (0x6E,0x12) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_B10 (0x6E,0x14) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_B11 (0x6E,0x16) 0x04000702 0x00000023 0x00000000 0x00000000 +GPP_B12 (0x6E,0x18) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_B13 (0x6E,0x1A) 0x44000700 0x0003c025 0x00000000 0x00000000 +GPP_B14 (0x6E,0x1C) 0x44000200 0x0003c026 0x00000000 0x00000000 +GPP_B15 (0x6E,0x1E) 0x44000201 0x00000027 0x00000000 0x00000000 +GPP_B16 (0x6E,0x20) 0x44000301 0x00000028 0x00000000 0x00000000 +GPP_B17 (0x6E,0x22) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_B18 (0x6E,0x24) 0x44000300 0x0000002a 0x00000100 0x00000000 +GPP_B19 (0x6E,0x26) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_B20 (0x6E,0x28) 0x44000300 0x0000002c 0x00000000 0x00000000 +GPP_B21 (0x6E,0x2A) 0x44000300 0x0000002d 0x00000000 0x00000000 +GPP_B22 (0x6E,0x2C) 0x44000300 0x0000002e 0x00000000 0x00000000 +GPP_B23 (0x6E,0x2E) 0x44000200 0x0000002f 0x00000000 0x00000000 +GPP_T2 (0x6E,0x38) 0x44000300 0x00000032 0x00000000 0x00000000 +GPP_T3 (0x6E,0x3A) 0x44000300 0x00000033 0x00000000 0x00000000 +GPP_A0 (0x6E,0x54) 0x44000700 0x0003f040 0x00000100 0x00000000 +GPP_A1 (0x6E,0x56) 0x44000702 0x0003f041 0x00000100 0x00000000 +GPP_A2 (0x6E,0x58) 0x44000700 0x0003f042 0x00000100 0x00000000 +GPP_A3 (0x6E,0x5A) 0x44000700 0x0003f043 0x00000100 0x00000000 +GPP_A4 (0x6E,0x5C) 0x44000700 0x0003f044 0x00000100 0x00000000 +GPP_A5 (0x6E,0x5E) 0x44000700 0x0003d045 0x00000100 0x00000000 +GPP_A6 (0x6E,0x60) 0x44000700 0x0003c046 0x00000100 0x00000000 +GPP_A7 (0x6E,0x62) 0x44000300 0x00000047 0x00000000 0x00000000 +GPP_A8 (0x6E,0x64) 0x44000b00 0x0003c048 0x00000100 0x00000000 +GPP_A9 (0x6E,0x66) 0x44000f00 0x0003c049 0x00000100 0x00000000 +GPP_A10 (0x6E,0x68) 0x44000300 0x0000004a 0x00000000 0x00000000 +GPP_A11 (0x6E,0x6A) 0x44000300 0x0000004b 0x00000000 0x00000000 +GPP_A12 (0x6E,0x6C) 0x44000702 0x0000304c 0x00000000 0x00000000 +GPP_A13 (0x6E,0x6E) 0x84000201 0x0000004d 0x00000000 0x00000000 +GPP_A14 (0x6E,0x70) 0x44000300 0x0000004e 0x00000000 0x00000000 +GPP_A15 (0x6E,0x72) 0x44000300 0x0000004f 0x00000000 0x00000000 +GPP_A16 (0x6E,0x74) 0x44000300 0x00000050 0x00000000 0x00000000 +GPP_A17 (0x6E,0x76) 0x44000300 0x00000051 0x00000000 0x00000000 +GPP_A18 (0x6E,0x78) 0x44000700 0x00024052 0x00000000 0x00000000 +GPP_A19 (0x6E,0x7A) 0x44000300 0x00000053 0x00000000 0x00000000 +GPP_A20 (0x6E,0x7C) 0x44000300 0x00000054 0x00000000 0x00000000 +GPP_A21 (0x6E,0x7E) 0x44000300 0x00000055 0x00000000 0x00000000 +GPP_A22 (0x6E,0x80) 0x44000300 0x00000056 0x00000000 0x00000000 +GPP_A23 (0x6E,0x82) 0x84000200 0x00000057 0x00000000 0x00000000 +GPP_S0 (0x6D,0x00) 0x44000300 0x0180006c 0x00000000 0x00000000 +GPP_S1 (0x6D,0x02) 0x44000300 0x0180006d 0x00000000 0x00000000 +GPP_S2 (0x6D,0x04) 0x44000300 0x0180006e 0x00000000 0x00000000 +GPP_S3 (0x6D,0x06) 0x44000300 0x0180006f 0x00000000 0x00000000 +GPP_S4 (0x6D,0x08) 0x44000300 0x01800070 0x00000000 0x00000000 +GPP_S5 (0x6D,0x0A) 0x44000300 0x01800071 0x00000000 0x00000000 +GPP_S6 (0x6D,0x0C) 0x44000300 0x01800072 0x00000000 0x00000000 +GPP_S7 (0x6D,0x0E) 0x44000300 0x01800073 0x00000000 0x00000000 +GPP_H0 (0x6D,0x10) 0x84000201 0x00000074 0x00000000 0x00000000 +GPP_H1 (0x6D,0x12) 0x44000300 0x00000075 0x00000000 0x00000000 +GPP_H2 (0x6D,0x14) 0x44000300 0x00000076 0x00000000 0x00000000 +GPP_H3 (0x6D,0x16) 0x44000100 0x00001077 0x00000000 0x00000000 +GPP_H4 (0x6D,0x18) 0x44000702 0x00000018 0x00000000 0x00000000 +GPP_H5 (0x6D,0x1A) 0x44000702 0x00000019 0x00000000 0x00000000 +GPP_H6 (0x6D,0x1C) 0x44000300 0x0000001a 0x00000000 0x00000000 +GPP_H7 (0x6D,0x1E) 0x44000300 0x0000001b 0x00000000 0x00000000 +GPP_H8 (0x6D,0x20) 0x44000100 0x0000101c 0x00000000 0x00000000 +GPP_H9 (0x6D,0x22) 0x44000100 0x0000101d 0x00000000 0x00000000 +GPP_H10 (0x6D,0x24) 0x44000702 0x0000001e 0x00000000 0x00000000 +GPP_H11 (0x6D,0x26) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_H12 (0x6D,0x28) 0x44000300 0x00000020 0x00000000 0x00000000 +GPP_H13 (0x6D,0x2A) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_H14 (0x6D,0x2C) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_H15 (0x6D,0x2E) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_H16 (0x6D,0x30) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_H17 (0x6D,0x32) 0x44000602 0x0003c025 0x00000000 0x00000000 +GPP_H18 (0x6D,0x34) 0x44000700 0x0003c026 0x00000000 0x00000000 +GPP_H19 (0x6D,0x36) 0x44000300 0x0003c027 0x00000000 0x00000000 +GPP_H20 (0x6D,0x38) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_H21 (0x6D,0x3A) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_H22 (0x6D,0x3C) 0x44000300 0x0000002a 0x00000000 0x00000000 +GPP_H23 (0x6D,0x3E) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_D0 (0x6D,0x40) 0x44000102 0x0000002c 0x00000000 0x00000000 +GPP_D1 (0x6D,0x42) 0x84000201 0x0000002d 0x00000000 0x00000000 +GPP_D2 (0x6D,0x44) 0x84000102 0x0000002e 0x00000000 0x00000000 +GPP_D3 (0x6D,0x46) 0x84000102 0x0000002f 0x00000000 0x00000000 +GPP_D4 (0x6D,0x48) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_D5 (0x6D,0x4A) 0x44000702 0x00000031 0x00000000 0x00000000 +GPP_D6 (0x6D,0x4C) 0x44000702 0x00000032 0x00000000 0x00000000 +GPP_D7 (0x6D,0x4E) 0x44000700 0x00000033 0x00000000 0x00000000 +GPP_D8 (0x6D,0x50) 0x44000700 0x00000034 0x00000000 0x00000000 +GPP_D9 (0x6D,0x52) 0x44000300 0x00000035 0x00000000 0x00000000 +GPP_D10 (0x6D,0x54) 0x44000300 0x00000036 0x00000000 0x00000000 +GPP_D11 (0x6D,0x56) 0x44000102 0x00001037 0x00000000 0x00000000 +GPP_D12 (0x6D,0x58) 0x44000102 0x00001038 0x00000800 0x00000000 +GPP_D13 (0x6D,0x5A) 0x84000201 0x00000039 0x00000000 0x00000000 +GPP_D14 (0x6D,0x5C) 0x84000201 0x0000003a 0x00000000 0x00000000 +GPP_D15 (0x6D,0x5E) 0x44000300 0x0000003b 0x00000000 0x00000000 +GPP_D16 (0x6D,0x60) 0x44000300 0x0000003c 0x00000000 0x00000000 +GPP_D17 (0x6D,0x62) 0x44000300 0x0000003d 0x00000000 0x00000000 +GPP_D18 (0x6D,0x64) 0x44000300 0x0000003e 0x00000000 0x00000000 +GPP_D19 (0x6D,0x66) 0x44000300 0x0000003f 0x00000000 0x00000000 +GPP_U4 (0x6D,0x72) 0x84000200 0x00000044 0x00000000 0x00000000 +GPP_U5 (0x6D,0x74) 0x84000201 0x00000045 0x00000000 0x00000000 +GPD0 (0x6C,0x00) 0x04000702 0x00003060 0x00000000 0x00000000 +GPD1 (0x6C,0x02) 0x04000702 0x00003c61 0x00000000 0x00000000 +GPD2 (0x6C,0x04) 0x04000102 0x00000062 0x00000000 0x00000000 +GPD3 (0x6C,0x06) 0x04000702 0x00003063 0x00000010 0x00000000 +GPD4 (0x6C,0x08) 0x04000600 0x00000064 0x00000000 0x00000000 +GPD5 (0x6C,0x0A) 0x04000600 0x00000065 0x00000000 0x00000000 +GPD6 (0x6C,0x0C) 0x44000700 0x00000066 0x00000000 0x00000000 +GPD7 (0x6C,0x0E) 0x04000201 0x00000067 0x00000000 0x00000000 +GPD8 (0x6C,0x10) 0x04000700 0x00000068 0x00000000 0x00000000 +GPD9 (0x6C,0x12) 0x04000200 0x00000069 0x00000000 0x00000000 +GPD10 (0x6C,0x14) 0x44000500 0x0000306a 0x00000000 0x00000000 +GPD11 (0x6C,0x16) 0x44000102 0x0000306b 0x00000000 0x00000000 +GPP_C0 (0x6A,0x00) 0x44000702 0x0003c06e 0x00000000 0x00000000 +GPP_C1 (0x6A,0x02) 0x44000702 0x0003c06f 0x00000000 0x00000000 +GPP_C2 (0x6A,0x04) 0x44000300 0x00000070 0x00000100 0x00000000 +GPP_C3 (0x6A,0x06) 0x44000702 0x00000071 0x00000000 0x00000000 +GPP_C4 (0x6A,0x08) 0x44000702 0x00000072 0x00000000 0x00000000 +GPP_C5 (0x6A,0x0A) 0x44000300 0x00000073 0x00000000 0x00000000 +GPP_C6 (0x6A,0x0C) 0x04000702 0x00000074 0x00000000 0x00000000 +GPP_C7 (0x6A,0x0E) 0x04000702 0x00000075 0x00000000 0x00000000 +GPP_C8 (0x6A,0x10) 0x44000300 0x00000076 0x00000000 0x00000000 +GPP_C9 (0x6A,0x12) 0x44000300 0x00000077 0x00000000 0x00000000 +GPP_C10 (0x6A,0x14) 0x44000300 0x00000018 0x00000000 0x00000000 +GPP_C11 (0x6A,0x16) 0x44000300 0x00000019 0x00000000 0x00000000 +GPP_C12 (0x6A,0x18) 0x44000300 0x0000001a 0x00000000 0x00000000 +GPP_C13 (0x6A,0x1A) 0x44000300 0x0000001b 0x00000000 0x00000000 +GPP_C14 (0x6A,0x1C) 0x40100102 0x0000301c 0x00000000 0x00000000 +GPP_C15 (0x6A,0x1E) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_C16 (0x6A,0x20) 0x44000702 0x0000001e 0x00000000 0x00000000 +GPP_C17 (0x6A,0x22) 0x44000702 0x0000001f 0x00000000 0x00000000 +GPP_C18 (0x6A,0x24) 0x44000702 0x00000020 0x00000000 0x00000000 +GPP_C19 (0x6A,0x26) 0x44000702 0x00000021 0x00000000 0x00000000 +GPP_C20 (0x6A,0x28) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_C21 (0x6A,0x2A) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_C22 (0x6A,0x2C) 0x84000201 0x00000024 0x00000000 0x00000000 +GPP_C23 (0x6A,0x2E) 0x40880100 0x00000025 0x00000000 0x00000000 +GPP_F0 (0x6A,0x30) 0x44000700 0x0003c056 0x00000100 0x00000000 +GPP_F1 (0x6A,0x32) 0x44000702 0x0003f057 0x00000100 0x00000000 +GPP_F2 (0x6A,0x34) 0x44000700 0x0003c058 0x00000100 0x00000000 +GPP_F3 (0x6A,0x36) 0x44000700 0x0003f059 0x00000100 0x00000000 +GPP_F4 (0x6A,0x38) 0x44000300 0x0000005a 0x00000100 0x00000000 +GPP_F5 (0x6A,0x3A) 0x44000300 0x0000005b 0x00000100 0x00000000 +GPP_F6 (0x6A,0x3C) 0x44000300 0x0000005c 0x00000100 0x00000000 +GPP_F7 (0x6A,0x3E) 0x44000201 0x0000005d 0x00000000 0x00000000 +GPP_F8 (0x6A,0x40) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_F9 (0x6A,0x42) 0x44000201 0x0000005f 0x00000000 0x00000000 +GPP_F10 (0x6A,0x44) 0x44000300 0x00000060 0x00000000 0x00000000 +GPP_F11 (0x6A,0x46) 0x44000300 0x00000061 0x00000000 0x00000000 +GPP_F12 (0x6A,0x48) 0x44000300 0x00000062 0x00000000 0x00000000 +GPP_F13 (0x6A,0x4A) 0x44000300 0x00000063 0x00000000 0x00000000 +GPP_F14 (0x6A,0x4C) 0x44000300 0x00000064 0x00000000 0x00000000 +GPP_F15 (0x6A,0x4E) 0x44000300 0x00000065 0x00000000 0x00000000 +GPP_F16 (0x6A,0x50) 0x44000300 0x00000066 0x00000000 0x00000000 +GPP_F17 (0x6A,0x52) 0x84000102 0x00000067 0x00000000 0x00000000 +GPP_F18 (0x6A,0x54) 0x44000300 0x00000068 0x00000000 0x00000000 +GPP_F19 (0x6A,0x56) 0x44000300 0x00000069 0x00000000 0x00000000 +GPP_F20 (0x6A,0x58) 0x44000300 0x0003c06a 0x00000000 0x00000000 +GPP_F21 (0x6A,0x5A) 0x44000100 0x0003d06b 0x00000000 0x00000000 +GPP_F22 (0x6A,0x5C) 0x44000300 0x0003c06c 0x00000000 0x00000000 +GPP_F23 (0x6A,0x5E) 0x44000300 0x0003c06d 0x00000000 0x00000000 +GPP_E0 (0x6A,0x6E) 0x44000702 0x00000026 0x00000000 0x00000000 +GPP_E1 (0x6A,0x70) 0x84000200 0x00000027 0x00000000 0x00000000 +GPP_E2 (0x6A,0x72) 0x40880102 0x00000028 0x00000000 0x00000000 +GPP_E3 (0x6A,0x74) 0x44000102 0x00001029 0x00000000 0x00000000 +GPP_E4 (0x6A,0x76) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_E5 (0x6A,0x78) 0x44000300 0x00000031 0x00000000 0x00000000 +GPP_E6 (0x6A,0x7A) 0x44000300 0x00000032 0x00000900 0x00000000 +GPP_E7 (0x6A,0x7C) 0x82840102 0x00000033 0x00000000 0x00000000 +GPP_E8 (0x6A,0x7E) 0x44000300 0x00000034 0x00000000 0x00000000 +GPP_E9 (0x6A,0x80) 0x44000300 0x00000035 0x00000800 0x00000000 +GPP_E10 (0x6A,0x82) 0x44000300 0x00000036 0x00000900 0x00000000 +GPP_E11 (0x6A,0x84) 0x44000300 0x00000037 0x00000900 0x00000000 +GPP_E12 (0x6A,0x86) 0x44000300 0x00000038 0x00000000 0x00000000 +GPP_E13 (0x6A,0x88) 0x44000300 0x00000039 0x00000000 0x00000000 +GPP_E14 (0x6A,0x8A) 0x44000702 0x0002403a 0x00000000 0x00000000 +GPP_E15 (0x6A,0x8C) 0x44000300 0x0000003b 0x00000000 0x00000000 +GPP_E16 (0x6A,0x8E) 0x44000102 0x0000103c 0x00000000 0x00000000 +GPP_E17 (0x6A,0x90) 0x44000300 0x0000003d 0x00000000 0x00000000 +GPP_E18 (0x6A,0x92) 0x44000300 0x00003c3e 0x00000000 0x00000000 +GPP_E19 (0x6A,0x94) 0x44000300 0x00003c3f 0x00000000 0x00000000 +GPP_E20 (0x6A,0x96) 0x44000300 0x00000040 0x00000000 0x00000000 +GPP_E21 (0x6A,0x98) 0x44000300 0x00000041 0x00000000 0x00000000 +GPP_E22 (0x6A,0x9A) 0x44000300 0x00000042 0x00000000 0x00000000 +GPP_E23 (0x6A,0x9C) 0x44000300 0x00000043 0x00000000 0x00000000 +GPP_R0 (0x69,0x00) 0x44000700 0x0003c058 0x00000000 0x00000000 +GPP_R1 (0x69,0x02) 0x44000700 0x0003fc59 0x00000000 0x00000000 +GPP_R2 (0x69,0x04) 0x44000600 0x0003fc5a 0x00000000 0x00000000 +GPP_R3 (0x69,0x06) 0x44000700 0x0003fc5b 0x00000000 0x00000000 +GPP_R4 (0x69,0x08) 0x44000700 0x0003c05c 0x00000000 0x00000000 +GPP_R5 (0x69,0x0A) 0x44000300 0x0000005d 0x00000000 0x00000000 +GPP_R6 (0x69,0x0C) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_R7 (0x69,0x0E) 0x44000300 0x0000005f 0x00000000 0x00000000 +## HDAUDIO ## +hdaudioC0D0 + vendor_name: Realtek + chip_name: ALC293 + vendor_id: 0x10ec0293 + subsystem_id: 0x155851a1 + revision_id: 0x100003 + 0x12: 0x90a60130 + 0x13: 0x40000000 + 0x14: 0x90170110 + 0x15: 0x02211020 + 0x16: 0x411111f0 + 0x18: 0x411111f0 + 0x19: 0x411111f0 + 0x1a: 0x411111f0 + 0x1b: 0x411111f0 + 0x1d: 0x40738205 + 0x1e: 0x411111f0 +hdaudioC0D2 + vendor_name: Intel + chip_name: Tigerlake HDMI + vendor_id: 0x80862812 + subsystem_id: 0x80860101 + revision_id: 0x100000 + 0x04: 0x18560010 + 0x06: 0x18560010 + 0x08: 0x18560010 + 0x0a: 0x18560010 + 0x0b: 0x18560010 + 0x0c: 0x18560010 + 0x0d: 0x18560010 + 0x0e: 0x18560010 + 0x0f: 0x18560010 diff --git a/models/darp7/coreboot.config b/models/darp7/coreboot.config new file mode 100644 index 0000000..dd0981e --- /dev/null +++ b/models/darp7/coreboot.config @@ -0,0 +1,29 @@ +CONFIG_VENDOR_SYSTEM76=y +CONFIG_BOARD_SYSTEM76_DARP7=y +CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Darter Pro" +CONFIG_MAINBOARD_VERSION="darp7" +CONFIG_ADD_FSP_BINARIES=y +CONFIG_CCACHE=y +CONFIG_CONSOLE_SERIAL=n +CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS=y +CONFIG_CPU_UCODE_BINARIES="$(FIRMWARE_OPEN_MODEL_DIR)/microcode.rom" +CONFIG_FSP_M_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_M.fd" +CONFIG_FSP_S_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_S.fd" +CONFIG_FSP_HEADER_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Include" +CONFIG_HAVE_IFD_BIN=y +CONFIG_HAVE_ME_BIN=y +CONFIG_IFD_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/fd.rom" +CONFIG_INTEL_GMA_VBT_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/vbt.rom" +CONFIG_ME_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/me.rom" +CONFIG_PAYLOAD_ELF=y +CONFIG_PAYLOAD_FILE="$(FIRMWARE_OPEN_UEFIPAYLOAD)" +CONFIG_PCIEXP_HOTPLUG_MEM=0x2000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x20000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G=y +CONFIG_POST_IO=n +CONFIG_RUN_FSP_GOP=y +CONFIG_SMMSTORE=y +CONFIG_SUBSYSTEM_DEVICE_ID=0x51a1 +CONFIG_SUBSYSTEM_VENDOR_ID=0x1558 +CONFIG_VALIDATE_INTEL_DESCRIPTOR=y +#CONFIG_CONSOLE_SYSTEM76_EC=y diff --git a/models/darp7/ec.config b/models/darp7/ec.config new file mode 100644 index 0000000..c583eba --- /dev/null +++ b/models/darp7/ec.config @@ -0,0 +1 @@ +BOARD=system76/darp7 diff --git a/models/darp7/ecspy.txt b/models/darp7/ecspy.txt new file mode 100644 index 0000000..b4df7c7 --- /dev/null +++ b/models/darp7/ecspy.txt @@ -0,0 +1,89 @@ +id 5570 rev 2 +A0: data 0 mirror 0 pot 0 control 00 +A1: data 0 mirror 0 pot 0 control 00 +A2: data 0 mirror 0 pot 0 control 00 +A3: data 1 mirror 1 pot 0 control 44 +A4: data 1 mirror 1 pot 0 control 44 +A5: data 0 mirror 0 pot 0 control 00 +A6: data 0 mirror 0 pot 0 control 00 +A7: data 0 mirror 1 pot 0 control 00 +B0: data 0 mirror 0 pot 0 control 84 +B1: data 1 mirror 1 pot 0 control 84 +B2: data 1 mirror 1 pot 0 control 44 +B3: data 1 mirror 1 pot 0 control 80 +B4: data 1 mirror 1 pot 0 control 40 +B5: data 1 mirror 1 pot 0 control 44 +B6: data 1 mirror 1 pot 0 control 44 +B7: data 1 mirror 1 pot 0 control 80 +C0: data 1 mirror 1 pot 0 control 80 +C1: data 1 mirror 1 pot 0 control 04 +C2: data 1 mirror 1 pot 0 control 04 +C3: data 0 mirror 0 pot 0 control 04 +C4: data 0 mirror 0 pot 0 control 84 +C5: data 0 mirror 0 pot 0 control 04 +C6: data 1 mirror 1 pot 0 control 40 +C7: data 0 mirror 0 pot 0 control 44 +D0: data 1 mirror 1 pot 0 control 44 +D1: data 1 mirror 1 pot 0 control 44 +D2: data 1 mirror 1 pot 0 control 00 +D3: data 1 mirror 1 pot 0 control 82 +D4: data 1 mirror 1 pot 0 control 40 +D5: data 1 mirror 1 pot 0 control 44 +D6: data 1 mirror 1 pot 0 control 02 +D7: data 0 mirror 0 pot 0 control 80 +E0: data 1 mirror 1 pot 0 control 04 +E1: data 1 mirror 1 pot 0 control 44 +E2: data 0 mirror 0 pot 0 control 84 +E3: data 0 mirror 0 pot 0 control 44 +E4: data 1 mirror 1 pot 0 control 42 +E5: data 1 mirror 1 pot 0 control 40 +E6: data 1 mirror 1 pot 0 control 80 +E7: data 1 mirror 1 pot 0 control 04 +F0: data 0 mirror 0 pot 0 control 44 +F1: data 1 mirror 1 pot 0 control 44 +F2: data 1 mirror 1 pot 0 control 44 +F3: data 0 mirror 0 pot 0 control 06 +F4: data 1 mirror 1 pot 0 control 04 +F5: data 1 mirror 1 pot 0 control 04 +F6: data 1 mirror 1 pot 0 control 00 +F7: data 1 mirror 1 pot 0 control 44 +G0: data 1 mirror 1 pot 0 control 80 +G1: data 1 mirror 1 pot 0 control 44 +G2: data 0 mirror 0 pot 0 control 40 +G3: data 0 mirror 0 pot 0 control 00 +G4: data 0 mirror 0 pot 0 control 00 +G5: data 0 mirror 0 pot 0 control 00 +G6: data 1 mirror 1 pot 0 control 44 +G7: data 0 mirror 0 pot 0 control 00 +H0: data 1 mirror 1 pot 0 control 80 +H1: data 1 mirror 1 pot 0 control 80 +H2: data 1 mirror 1 pot 0 control 44 +H3: data 1 mirror 1 pot 0 control 80 +H4: data 1 mirror 1 pot 0 control 84 +H5: data 0 mirror 0 pot 0 control 44 +H6: data 1 mirror 1 pot 0 control 80 +H7: data 1 mirror 1 pot 0 control 80 +I0: data 0 mirror 0 pot 0 control 00 +I1: data 0 mirror 0 pot 0 control 00 +I2: data 0 mirror 0 pot 0 control 40 +I3: data 0 mirror 0 pot 0 control 80 +I4: data 0 mirror 0 pot 0 control 00 +I5: data 0 mirror 0 pot 0 control 00 +I6: data 0 mirror 0 pot 0 control 00 +I7: data 0 mirror 0 pot 0 control 00 +J0: data 1 mirror 1 pot 0 control 44 +J1: data 1 mirror 1 pot 0 control 40 +J2: data 0 mirror 0 pot 0 control 00 +J3: data 1 mirror 1 pot 0 control 80 +J4: data 1 mirror 1 pot 0 control 40 +J5: data 0 mirror 0 pot 0 control 40 +J6: data 1 mirror 1 pot 0 control 80 +J7: data 1 mirror 1 pot 0 control 80 +M0: data 0 mirror 0 control 06 +M1: data 0 mirror 0 control 06 +M2: data 0 mirror 0 control 06 +M3: data 0 mirror 0 control 06 +M4: data 0 mirror 0 control 06 +M5: data 0 mirror 0 control 00 +M6: data 0 mirror 0 control 86 +M7: data 0 mirror 0 control 86 diff --git a/models/darp7/edk2.config b/models/darp7/edk2.config new file mode 100644 index 0000000..eb4f1b9 --- /dev/null +++ b/models/darp7/edk2.config @@ -0,0 +1,2 @@ +PCIE_BASE=0xC0000000 +#SYSTEM76_EC_LOGGING=TRUE diff --git a/models/darp7/fd.rom b/models/darp7/fd.rom new file mode 100644 index 0000000..9a7643a --- /dev/null +++ b/models/darp7/fd.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:0aabf25a7ed9bef3e8a3a61cf85aa95b9972182887389f654ca7970a5178def3 +size 4096 diff --git a/models/darp7/gpio.h b/models/darp7/gpio.h new file mode 100644 index 0000000..c5b9ea8 --- /dev/null +++ b/models/darp7/gpio.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include +#include + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPD0, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1), + PAD_CFG_GPI(GPD2, NONE, PWROK), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPD7, 1, NONE, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD9, 0, NONE, PWROK), + PAD_CFG_NF(GPD10, UP_20K, DEEP, NF1), + PAD_CFG_GPI(GPD11, UP_20K, DEEP), + PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), + PAD_NC(GPP_A7, NONE), + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF2), + PAD_CFG_NF(GPP_A9, NONE, DEEP, NF3), + PAD_NC(GPP_A10, NONE), + PAD_NC(GPP_A11, NONE), + PAD_CFG_NF(GPP_A12, UP_20K, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_A13, 1, NONE, PLTRST), + PAD_NC(GPP_A14, NONE), + PAD_NC(GPP_A15, NONE), + PAD_NC(GPP_A16, NONE), + PAD_NC(GPP_A17, NONE), + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + PAD_NC(GPP_A19, NONE), + PAD_NC(GPP_A20, NONE), + PAD_NC(GPP_A21, NONE), + PAD_NC(GPP_A22, NONE), + PAD_CFG_TERM_GPO(GPP_A23, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_B2, UP_20K, DEEP), + _PAD_CFG_STRUCT(GPP_B3, 0x80800100, 0x0000), + PAD_NC(GPP_B4, NONE), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), + PAD_CFG_TERM_GPO(GPP_B8, 1, NONE, DEEP), + PAD_NC(GPP_B9, NONE), + PAD_NC(GPP_B10, NONE), + PAD_CFG_NF(GPP_B11, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_B14, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B15, 1, NONE, DEEP), + _PAD_CFG_STRUCT(GPP_B16, 0x44000301, 0x0000), + PAD_NC(GPP_B17, NONE), + PAD_NC(GPP_B18, NONE), + PAD_NC(GPP_B19, NONE), + PAD_NC(GPP_B20, NONE), + PAD_NC(GPP_B21, NONE), + PAD_NC(GPP_B22, NONE), + PAD_CFG_TERM_GPO(GPP_B23, 0, NONE, DEEP), + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_NC(GPP_C2, NONE), + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_NC(GPP_C5, NONE), + PAD_CFG_NF(GPP_C6, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_C7, NONE, PWROK, NF1), + PAD_NC(GPP_C8, NONE), + PAD_NC(GPP_C9, NONE), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_NC(GPP_C13, NONE), + _PAD_CFG_STRUCT(GPP_C14, 0x40100100, 0x3000), + PAD_NC(GPP_C15, NONE), + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + PAD_NC(GPP_C20, NONE), + PAD_NC(GPP_C21, NONE), + PAD_CFG_TERM_GPO(GPP_C22, 1, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_C23, 0x40880100, 0x0000), + PAD_CFG_GPI(GPP_D0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_D1, 1, NONE, PLTRST), + PAD_CFG_GPI(GPP_D2, NONE, PLTRST), + PAD_CFG_GPI(GPP_D3, NONE, PLTRST), + PAD_NC(GPP_D4, NONE), + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + PAD_NC(GPP_D9, NONE), + PAD_NC(GPP_D10, NONE), + PAD_CFG_GPI(GPP_D11, DN_20K, DEEP), + PAD_CFG_GPI(GPP_D12, DN_20K, DEEP), + PAD_CFG_TERM_GPO(GPP_D13, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_D14, 1, NONE, PLTRST), + PAD_NC(GPP_D15, NONE), + PAD_NC(GPP_D16, NONE), + PAD_NC(GPP_D17, NONE), + PAD_NC(GPP_D18, NONE), + PAD_NC(GPP_D19, NONE), + PAD_CFG_NF(GPP_E0, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_E1, 0, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_E2, 0x40880100, 0x0000), + PAD_CFG_GPI(GPP_E3, DN_20K, DEEP), + PAD_NC(GPP_E4, NONE), + PAD_NC(GPP_E5, NONE), + PAD_NC(GPP_E6, NONE), + _PAD_CFG_STRUCT(GPP_E7, 0x82840100, 0x0000), + PAD_NC(GPP_E8, NONE), + PAD_NC(GPP_E9, NONE), + PAD_NC(GPP_E10, NONE), + PAD_NC(GPP_E11, NONE), + PAD_NC(GPP_E12, NONE), + PAD_NC(GPP_E13, NONE), + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + PAD_NC(GPP_E15, NONE), + PAD_CFG_GPI(GPP_E16, DN_20K, DEEP), + PAD_NC(GPP_E17, NONE), + PAD_NC(GPP_E18, NATIVE), + PAD_NC(GPP_E19, NATIVE), + PAD_NC(GPP_E20, NONE), + PAD_NC(GPP_E21, NONE), + PAD_NC(GPP_E22, NONE), + PAD_NC(GPP_E23, NONE), + PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F3, UP_20K, DEEP, NF1), + PAD_NC(GPP_F4, NONE), + PAD_NC(GPP_F5, NONE), + PAD_NC(GPP_F6, NONE), + PAD_CFG_TERM_GPO(GPP_F7, 1, NONE, DEEP), + PAD_NC(GPP_F8, NONE), + PAD_CFG_TERM_GPO(GPP_F9, 1, NONE, DEEP), + PAD_NC(GPP_F10, NONE), + PAD_NC(GPP_F11, NONE), + PAD_NC(GPP_F12, NONE), + PAD_NC(GPP_F13, NONE), + PAD_NC(GPP_F14, NONE), + PAD_NC(GPP_F15, NONE), + PAD_NC(GPP_F16, NONE), + PAD_CFG_GPI(GPP_F17, NONE, PLTRST), + PAD_NC(GPP_F18, NONE), + PAD_NC(GPP_F19, NONE), + PAD_NC(GPP_F20, NONE), + PAD_CFG_GPI(GPP_F21, DN_20K, DEEP), + PAD_NC(GPP_F22, NONE), + PAD_NC(GPP_F23, NONE), + PAD_CFG_TERM_GPO(GPP_H0, 1, NONE, PLTRST), + PAD_NC(GPP_H1, NONE), + PAD_NC(GPP_H2, NONE), + PAD_CFG_GPI(GPP_H3, DN_20K, DEEP), + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + PAD_NC(GPP_H6, NONE), + PAD_NC(GPP_H7, NONE), + PAD_CFG_GPI(GPP_H8, DN_20K, DEEP), + PAD_CFG_GPI(GPP_H9, DN_20K, DEEP), + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF1), + PAD_NC(GPP_H11, NONE), + PAD_NC(GPP_H12, NONE), + PAD_NC(GPP_H13, NONE), + PAD_NC(GPP_H14, NONE), + PAD_NC(GPP_H15, NONE), + PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), + PAD_NC(GPP_H19, NONE), + PAD_NC(GPP_H20, NONE), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, NONE), + PAD_NC(GPP_H23, NONE), + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1), + PAD_NC(GPP_R5, NONE), + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), + PAD_NC(GPP_S4, NONE), + PAD_NC(GPP_S5, NONE), + PAD_NC(GPP_S6, NONE), + PAD_NC(GPP_S7, NONE), + PAD_NC(GPP_T2, NONE), + PAD_NC(GPP_T3, NONE), + PAD_CFG_TERM_GPO(GPP_U4, 0, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_U5, 1, NONE, PLTRST), +}; + +#endif + +#endif diff --git a/models/darp7/hda_verb.c b/models/darp7/hda_verb.c new file mode 100644 index 0000000..590e453 --- /dev/null +++ b/models/darp7/hda_verb.c @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* Realtek, ALC293 */ + 0x10ec0293, /* Vendor ID */ + 0x155851a1, /* Subsystem ID */ + 12, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x155851a1), + AZALIA_PIN_CFG(0, 0x12, 0x90a60130), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x02211020), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x40738205), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + /* Intel, TigerlakeHDMI */ + 0x80862812, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 10, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x04, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x08, 0x18560010), + AZALIA_PIN_CFG(2, 0x0a, 0x18560010), + AZALIA_PIN_CFG(2, 0x0b, 0x18560010), + AZALIA_PIN_CFG(2, 0x0c, 0x18560010), + AZALIA_PIN_CFG(2, 0x0d, 0x18560010), + AZALIA_PIN_CFG(2, 0x0e, 0x18560010), + AZALIA_PIN_CFG(2, 0x0f, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/models/darp7/me.rom b/models/darp7/me.rom new file mode 100644 index 0000000..bb6e35f --- /dev/null +++ b/models/darp7/me.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:70dcb245f002fec70be61ac7fdf8dd4e69066e45b5f62b2d9def6a3050543b9c +size 5238784 diff --git a/models/darp7/microcode.rom b/models/darp7/microcode.rom new file mode 100644 index 0000000..6ec2b90 --- /dev/null +++ b/models/darp7/microcode.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc4cd808a0e1705603bbecca807194d3e24b3cce8c6d62f6671e4cda5e7bd955 +size 107520 diff --git a/models/darp7/vbt.rom b/models/darp7/vbt.rom new file mode 100644 index 0000000..0c00d41 --- /dev/null +++ b/models/darp7/vbt.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a02508cfabacbbc0c98eea24e6e1b457c18bd28a35c72d8edb72dd15df11195 +size 8704 diff --git a/models/galp5/FSP/Fsp_M.fd b/models/galp5/FSP/Fsp_M.fd new file mode 100644 index 0000000..2a65483 --- /dev/null +++ b/models/galp5/FSP/Fsp_M.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23305ad95f1d05d58ca6719df91b44ebf874702f9d572d4b2614c0b13009c866 +size 651264 diff --git a/models/galp5/FSP/Fsp_S.fd b/models/galp5/FSP/Fsp_S.fd new file mode 100644 index 0000000..108a145 --- /dev/null +++ b/models/galp5/FSP/Fsp_S.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c43ec298a13c0c5658ca299adfe6c803d309ae4602ec2fbc8d6fbc7ecf459f5d +size 368640 diff --git a/models/galp5/FSP/Fsp_T.fd b/models/galp5/FSP/Fsp_T.fd new file mode 100644 index 0000000..6dcc56a --- /dev/null +++ b/models/galp5/FSP/Fsp_T.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52b36311001a3f2b2c5731c7246f23a9806f983913b4cff916c216fcd3efa2c5 +size 28672 diff --git a/models/galp5/FSP/Include/FirmwareVersionInfoHob.h b/models/galp5/FSP/Include/FirmwareVersionInfoHob.h new file mode 100644 index 0000000..54543d4 --- /dev/null +++ b/models/galp5/FSP/Include/FirmwareVersionInfoHob.h @@ -0,0 +1,69 @@ +/** @file + Header file for Firmware Version Information + + @copyright + INTEL CONFIDENTIAL + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.
+ + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include +#include +#include + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/models/galp5/FSP/Include/FspInfoHob.h b/models/galp5/FSP/Include/FspInfoHob.h new file mode 100644 index 0000000..bc82ddf --- /dev/null +++ b/models/galp5/FSP/Include/FspInfoHob.h @@ -0,0 +1,56 @@ +/** @file + Header file for FSP Information HOB. + +@copyright + INTEL CONFIDENTIAL + Copyright 2017 - 2019 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ + +#ifndef _FSP_INFO_HOB_H_ +#define _FSP_INFO_HOB_H_ + +extern EFI_GUID gFspInfoGuid; + +#pragma pack (push, 1) + +typedef struct { +UINT8 SiliconInitVersionMajor; +UINT8 SiliconInitVersionMinor; +UINT8 SiliconInitVersionRevision; +UINT8 SiliconInitVersionBuild; +UINT8 FspVersionRevision; +UINT8 FspVersionBuild; +UINT8 TimeStamp [12]; +UINT8 FspVersionMinor; +} FSP_INFO_HOB; + +#pragma pack (pop) + +#endif // _FSP_INFO_HOB_H_ diff --git a/models/galp5/FSP/Include/FspUpd.h b/models/galp5/FSP/Include/FspUpd.h new file mode 100644 index 0000000..8315336 --- /dev/null +++ b/models/galp5/FSP/Include/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C4754 /* 'TGLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4754 /* 'TGLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C4754 /* 'TGLUPD_S' */ + +#pragma pack() + +#endif diff --git a/models/galp5/FSP/Include/FspmUpd.h b/models/galp5/FSP/Include/FspmUpd.h new file mode 100644 index 0000000..8d2db72 --- /dev/null +++ b/models/galp5/FSP/Include/FspmUpd.h @@ -0,0 +1,3574 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include + +#pragma pack(1) + + +#include + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x004A - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x004B - Enable/Disable CrashLog Device 10 + Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog + $EN_DIS +**/ + UINT8 CpuCrashLogDevice; + +/** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr00] +**/ + UINT32 MemorySpdPtr000; + +/** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr01] +**/ + UINT32 MemorySpdPtr001; + +/** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr02] +**/ + UINT32 MemorySpdPtr010; + +/** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr03] +**/ + UINT32 MemorySpdPtr011; + +/** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr04] +**/ + UINT32 MemorySpdPtr020; + +/** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr05] +**/ + UINT32 MemorySpdPtr021; + +/** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr06] +**/ + UINT32 MemorySpdPtr030; + +/** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr07] +**/ + UINT32 MemorySpdPtr031; + +/** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr08] +**/ + UINT32 MemorySpdPtr100; + +/** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr09] +**/ + UINT32 MemorySpdPtr101; + +/** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr10] +**/ + UINT32 MemorySpdPtr110; + +/** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr11] +**/ + UINT32 MemorySpdPtr111; + +/** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr12] +**/ + UINT32 MemorySpdPtr120; + +/** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr13] +**/ + UINT32 MemorySpdPtr121; + +/** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr14] +**/ + UINT32 MemorySpdPtr130; + +/** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr15] +**/ + UINT32 MemorySpdPtr131; + +/** Offset 0x008C - RcompResistor settings + Indicates RcompResistor settings: Board-dependent +**/ + UINT16 RcompResistor; + +/** Offset 0x008E - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh0] +**/ + UINT8 DqsMapCpu2DramMc0Ch0[2]; + +/** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh1] +**/ + UINT8 DqsMapCpu2DramMc0Ch1[2]; + +/** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh2] +**/ + UINT8 DqsMapCpu2DramMc0Ch2[2]; + +/** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh3] +**/ + UINT8 DqsMapCpu2DramMc0Ch3[2]; + +/** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh4] +**/ + UINT8 DqsMapCpu2DramMc1Ch0[2]; + +/** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh5] +**/ + UINT8 DqsMapCpu2DramMc1Ch1[2]; + +/** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh6] +**/ + UINT8 DqsMapCpu2DramMc1Ch2[2]; + +/** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh7] +**/ + UINT8 DqsMapCpu2DramMc1Ch3[2]; + +/** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh0] +**/ + UINT8 DqMapCpu2DramMc0Ch0[16]; + +/** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh1] +**/ + UINT8 DqMapCpu2DramMc0Ch1[16]; + +/** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh2] +**/ + UINT8 DqMapCpu2DramMc0Ch2[16]; + +/** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh3] +**/ + UINT8 DqMapCpu2DramMc0Ch3[16]; + +/** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh4] +**/ + UINT8 DqMapCpu2DramMc1Ch0[16]; + +/** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh5] +**/ + UINT8 DqMapCpu2DramMc1Ch1[16]; + +/** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh6] +**/ + UINT8 DqMapCpu2DramMc1Ch2[16]; + +/** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh7] +**/ + UINT8 DqMapCpu2DramMc1Ch3[16]; + +/** Offset 0x0128 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0129 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x012A - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x012B - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x012C - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x012D +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0130 - Intel Enhanced Debug + @deprecated - Not used and has no effect + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x0134 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x0138 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x013A - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x013B - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x013C - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[16]; + +/** Offset 0x014C - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options.\Manual: Do not use Platform Debug Consent to override other debug-relevant + policies, but the user must set each debug option manually, aimed at advanced users.\n + Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting. + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x014D - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x014E - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x014F - Enable DCI ModPHY Power Gate + Enable ModPHY Power Gate when DCI is enabled + $EN_DIS +**/ + UINT8 DciModphyPg; + +/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x0151 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x0154 - HD Audio DMIC Link Clock Select + Determines DMIC Clock Source. 0: Both, 1: ClkA, 2: ClkB + 0: Both, 1: ClkA, 2: ClkB +**/ + UINT8 PchHdaAudioLinkDmicClockSelect[2]; + +/** Offset 0x0156 - PchPreMemRsvd + Reserved for PCH Pre-Mem Reserved + $EN_DIS +**/ + UINT8 PchPreMemRsvd[5]; + +/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x015D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0160 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x0184 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x0185 - Vtd Programming for Igd + 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIgdEnable; + +/** Offset 0x0186 - Vtd Programming for Ipu + 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIpuEnable; + +/** Offset 0x0187 - Vtd Programming for Iop + 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIopEnable; + +/** Offset 0x0188 - Vtd Programming for ITbt + 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdItbtEnable; + +/** Offset 0x0189 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, + 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, + 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x018A - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x018B - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x018C - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x018D +**/ + UINT8 UnusedUpdSpace2; + +/** Offset 0x018E - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x0190 - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at three different frequencies. + 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x0191 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0192 - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x0193 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x0194 - Controller 0 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh0] +**/ + UINT8 DisableDimmMc0Ch0; + +/** Offset 0x0195 - Controller 0 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh1] +**/ + UINT8 DisableDimmMc0Ch1; + +/** Offset 0x0196 - Controller 0 Channel 2 DIMM Control + Controller 0 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh2] +**/ + UINT8 DisableDimmMc0Ch2; + +/** Offset 0x0197 - Controller 0 Channel 3 DIMM Control + Controller 0 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh3] +**/ + UINT8 DisableDimmMc0Ch3; + +/** Offset 0x0198 - Controller 1 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh4] +**/ + UINT8 DisableDimmMc1Ch0; + +/** Offset 0x0199 - Controller 1 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh5] +**/ + UINT8 DisableDimmMc1Ch1; + +/** Offset 0x019A - Controller 1 Channel 2 DIMM Control + Controller 1 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh6] +**/ + UINT8 DisableDimmMc1Ch2; + +/** Offset 0x019B - Controller 1 Channel 3 DIMM Control + Controller 1 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh7] +**/ + UINT8 DisableDimmMc1Ch3; + +/** Offset 0x019C - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x019D - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x019E - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x019F +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x01A0 - Memory Voltage + DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM + chips) in millivolts. 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x01A2 - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x01A3 - tCL + CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCL; + +/** Offset 0x01A4 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCWL; + +/** Offset 0x01A5 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01A6 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tFAW; + +/** Offset 0x01A8 - tRAS + RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRAS; + +/** Offset 0x01AA - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT8 tRCDtRP; + +/** Offset 0x01AB +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x01AC - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tREFI; + +/** Offset 0x01AE - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRFC; + +/** Offset 0x01B0 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRRD; + +/** Offset 0x01B1 - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRTP; + +/** Offset 0x01B2 - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x01B3 - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tWTR; + +/** Offset 0x01B4 - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x01B5 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x01B6 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x01B7 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x01B8 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x01B9 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x01BA - SAGV Gear Ratio + Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 SaGvGear[4]; + +/** Offset 0x01BE - SAGV Frequency + SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. +**/ + UINT16 SaGvFreq[4]; + +/** Offset 0x01C6 - SAGV Disabled Gear Ratio + Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 GearRatio; + +/** Offset 0x01C7 - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x01C8 - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x01CC - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x01D0 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x01D4 - HG dGPU Power Delay + HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 HgDelayAfterPwrEn; + +/** Offset 0x01D6 - HG dGPU Reset Delay + HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 HgDelayAfterHoldReset; + +/** Offset 0x01D8 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x01DB - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x01DC - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x01DD +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x01E0 - Temporary MMIO address for GMADR + Obsolete field now and it has been extended to 64 bit address, used GmAdr64 +**/ + UINT32 GmAdr; + +/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x01E8 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x01EA +**/ + UINT8 UnusedUpdSpace7[2]; + +/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0 + Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie0Rtd3Gpio[24]; + +/** Offset 0x024C - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x024D - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x024E - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x024F - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x0250 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x0254 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x0256 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x0259 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x025A - iTBT PCIe Multiple Segment setting + When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the + TBT PCIe RP are located at Segment1. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PcieMultipleSegmentEnabled; + +/** Offset 0x025B - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x025C - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x025D - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;1: Enable. + $EN_DIS +**/ + UINT8 ImguClkOutEn[6]; + +/** Offset 0x0263 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x0264 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 CpuPcieRpEnableMask; + +/** Offset 0x0268 - Assertion on Link Down GPIOs + GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down + GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpLinkDownGpios; + +/** Offset 0x0269 - Enable ClockReq Messaging + ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default): + Enable ClockReq Messaging [ALIAS_NAME RpClockReqMsgEnable] + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpClockReqMsgEnable; + +/** Offset 0x026A - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; + 4: Gen4 (see: CPU_PCIE_SPEED). [ALIAS_NAME RpPcieThresholdBytes] +**/ + UINT8 CpuPcieRpPcieSpeed[4]; + +/** Offset 0x026E - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x026F - Selection of DiSM Region Size + DiSM Size to be allocated for 2LM Sku Default is 0 + 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB +**/ + UINT8 DismSize; + +/** Offset 0x0270 - Enable Display memory map programming for DFD Restore + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DfdRestoreEnable; + +/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0272 - Program GPIOs for LFP on DDI port-B device + 0(Default)=Disabled,1=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortBConfig; + +/** Offset 0x0273 - Enable or disable HPD of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortAHpd; + +/** Offset 0x0274 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0275 - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0276 - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x0277 - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x0278 - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x0279 - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x027A - Enable or disable DDC of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortADdc; + +/** Offset 0x027B - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x027C - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x027D - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x027E - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x027F - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0280 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0281 - Enable Gt CLOS + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 GtClosEnable; + +/** Offset 0x0282 +**/ + UINT8 UnusedUpdSpace9[6]; + +/** Offset 0x0288 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB) +**/ + UINT64 GmAdr64; + +/** Offset 0x0290 - Hybrid Graphics Slot Selection + PEG or PCH Slot Selection for Hybrid Graphics +**/ + UINT8 HgSlot; + +/** Offset 0x0291 - DMI ASPM Configuration:{Combo + Set ASPM Configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspm; + +/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo + Set ASPM Control configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspmCtrl; + +/** Offset 0x0293 - DMI ASPM L1 exit Latency + Range: 0-7, 4 is default L1 exit Latency +**/ + UINT8 DmiAspmL1ExitLatency; + +/** Offset 0x0294 - Per-core HT Disable + Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, + 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value + of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have + HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. +**/ + UINT16 PerCoreHtDisable; + +/** Offset 0x0296 - DEKEL CDR Relock + Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable +**/ + UINT8 CpuPcieRpCdrRelock[4]; + +/** Offset 0x029A - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[96]; + +/** Offset 0x02FA - DMI Max Link Speed + Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): + Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x02FB - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x02FC - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x02FE - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x02FF - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0307 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x030F - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x031B - BIST on Reset + Enable or Disable BIST on Reset; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x031D - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- 1: Allocate PRMRR memory for C6DRAM power gating feature. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x031E - Over clocking support + Over clocking support; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x031F - Over clocking Lock + Over clocking Lock Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0320 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0321 - Core voltage mode + Core voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0322 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0323 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x0324 - Enable or Disable CPU Ratio Override + Enable or Disable CPU Ratio Override; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuRatioOverride; + +/** Offset 0x0325 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x0326 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. + 1: Maximum non-turbo performance. 2: Turbo performance + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x0327 - Number of active cores + Number of active cores(Depends on Number of cores). 0: All;1: 1 ;2: + 2 ;3: 3 + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting + 0: 800 MHz (ULT/ULX). 1: 1 GHz (DT/Halo). Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x0329 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x032A - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x032B - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x032C - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x032D - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. 0: + Disable; 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x032E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0330 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0332 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0334 - Core PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0335 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0336 - Ring voltage mode + Ring voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0337 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0338 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x033A - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x033C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x033E - Enable or Disable TME + Enable or Disable TME; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x033F - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x0340 - ElixirSpringsPatchAddr + DEPRECATED +**/ + UINT32 ElixirSpringsPatchAddr; + +/** Offset 0x0344 - ElixirSpringsPatchSize + DEPRECATED +**/ + UINT32 ElixirSpringsPatchSize; + +/** Offset 0x0348 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; 2: + No Change + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0349 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x034A - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x034B +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x034C - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x034D - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x034E +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0350 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0354 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0358 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0360 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0364 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0368 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x036C - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0370 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x0374 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0378 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0380 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0388 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0389 - Configuration for boot TDP selection + Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x038A - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[5]; + +/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x03D7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x03EF - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x0407 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x041F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0437 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x044F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0467 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x047F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0497 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x04AF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x04C7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x04DF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x04E7 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x04EF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x04F7 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x04FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x0507 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x050F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x0517 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x051F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0527 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x052F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0537 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x053F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0547 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x054F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0557 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x055F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0567 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0570 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + 0:LPC, 1:PCI +**/ + UINT8 PchPort80Route; + +/** Offset 0x0571 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0572 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0573 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x0574 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0576 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0577 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x0587 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x0597 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0598 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x059C - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x05A0 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x05A1 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x05A3 +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x05A4 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x05A8 - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x05AA - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x05AB +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x05AC - Serial Io Uart Debug Mmio Base + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 SerialIoUartDebugMmioBase; + +/** Offset 0x05B0 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x05B1 - GT PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x05B2 - Ring PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x05B3 - System Agent PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x05B4 - Memory Controller PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x05B5 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x05B6 - TCSS Thunderbolt PCIE Root Port 0 Enable + Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie0En; + +/** Offset 0x05B7 - TCSS Thunderbolt PCIE Root Port 1 Enable + Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie1En; + +/** Offset 0x05B8 - TCSS Thunderbolt PCIE Root Port 2 Enable + Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie2En; + +/** Offset 0x05B9 - TCSS Thunderbolt PCIE Root Port 3 Enable + Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie3En; + +/** Offset 0x05BA - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x05BB - TCSS USB DEVICE (xDCI) Enable + Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled + $EN_DIS +**/ + UINT8 TcssXdciEn; + +/** Offset 0x05BC - TCSS DMA0 Enable + Set TCSS DMA0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma0En; + +/** Offset 0x05BD - TCSS DMA1 Enable + Set TCSS DMA1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma1En; + +/** Offset 0x05BE - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x05BF - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x05C0 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x05C1 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x05C3 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x05C4 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x05C5 - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x05C6 - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x05C7 - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x05C8 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x05C9 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x05CA - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x05CB - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x05CC - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x05CD - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x05CE - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x05CF - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x05D0 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x05D1 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x05D2 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x05D3 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x05D4 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x05D5 - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x05D6 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x05D7 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x05D8 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x05D9 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x05DA - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x05DB - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x05DC - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x05DD - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x05DE - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x05DF - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x05E0 - Ibecc + In-Band ECC Support + $EN_DIS +**/ + UINT8 Ibecc; + +/** Offset 0x05E1 - IbeccParity + In-Band ECC Parity Control + $EN_DIS +**/ + UINT8 IbeccParity; + +/** Offset 0x05E2 - IbeccOperationMode + In-Band ECC Operation Mode + 0:Protect base on address range, 1: Non-protected, 2: All protected +**/ + UINT8 IbeccOperationMode; + +/** Offset 0x05E3 - IbeccProtectedRegionEnable + In-Band ECC Protected Region Enable + $EN_DIS +**/ + UINT8 IbeccProtectedRegionEnable[8]; + +/** Offset 0x05EB +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x05EC - IbeccProtectedRegionBases + IBECC Protected Region Bases +**/ + UINT16 IbeccProtectedRegionBase[8]; + +/** Offset 0x05FC - IbeccProtectedRegionMasks + IBECC Protected Region Masks +**/ + UINT16 IbeccProtectedRegionMask[8]; + +/** Offset 0x060C - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x060D - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x060E - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x060F - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x0610 - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x0611 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x0612 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x0613 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0614 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0615 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0616 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0617 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0618 - New Features 1 - MRC + New Feature Enabling 1, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable1; + +/** Offset 0x0619 - New Features 2 - MRC + New Feature Enabling 2, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable2; + +/** Offset 0x061A - Duty Cycle Correction Training + Enable/Disable Duty Cycle Correction Training + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x061B - Read Voltage Centering 1D + Enable/Disable Read Voltage Centering 1D + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x061C - TxDqTCO Comp Training + Enable/Disable TxDqTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x061D - ClkTCO Comp Training + Enable/Disable ClkTCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x061E - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x061F - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x0620 - DIMM CA ODT Training + Enable/Disable DIMM CA ODT Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x0621 - TxDqsTCO Comp Training + Enable/Disable TxDqsTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCODQS; + +/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D + Enable/Disable CMD/CTL Drive Strength Up/Dn 2D + $EN_DIS +**/ + UINT8 CMDDRUD; + +/** Offset 0x0623 - VccDLL Bypass Training + Enable/Disable VccDLL Bypass Training + $EN_DIS +**/ + UINT8 VCCDLLBP; + +/** Offset 0x0624 - PanicVttDnLp Training + Enable/Disable PanicVttDnLp Training + $EN_DIS +**/ + UINT8 PVTTDNLP; + +/** Offset 0x0625 - Read Vref Decap Training* + Enable/Disable Read Vref Decap Training* + $EN_DIS +**/ + UINT8 RDVREFDC; + +/** Offset 0x0626 - Vddq Training + Enable/Disable Vddq Training + $EN_DIS +**/ + UINT8 VDDQT; + +/** Offset 0x0627 - Rank Margin Tool Per Bit + Enable/Disable Rank Margin Tool Per Bit + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x0628 +**/ + UINT8 Reserved2[2]; + +/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x062C - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x062D +**/ + UINT8 UnusedUpdSpace16; + +/** Offset 0x062E - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x0830 +**/ + UINT16 ChHashMask; + +/** Offset 0x0630 - Base reference clock value + Base reference clock value, in Hertz(Default is 100Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0634 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x0636 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x0638 - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm0; + +/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm1; + +/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm0; + +/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm1; + +/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm0; + +/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm1; + +/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm0; + +/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm1; + +/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm0; + +/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm1; + +/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm0; + +/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm1; + +/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm0; + +/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm1; + +/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm0; + +/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm1; + +/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm0; + +/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm1; + +/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm0; + +/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm1; + +/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm0; + +/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm1; + +/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm0; + +/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm1; + +/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm0; + +/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm1; + +/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm0; + +/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm1; + +/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm0; + +/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm1; + +/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm0; + +/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm1; + +/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm0; + +/** Offset 0x065A - Write Energy Mc0Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm1; + +/** Offset 0x065B - Write Energy Mc0Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm0; + +/** Offset 0x065C - Write Energy Mc0Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm1; + +/** Offset 0x065D - Write Energy Mc1Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm0; + +/** Offset 0x065E - Write Energy Mc1Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm1; + +/** Offset 0x065F - Write Energy Mc1Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm0; + +/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm1; + +/** Offset 0x0661 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x00 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0662 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x0663 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x0664 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x0665 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x0666 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x0667 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x0668 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0669 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x066A - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x066B - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x066C - Page Close Idle Timeout + This option controls Page Close Idle Timeout + 0:Enabled, 1:Disabled +**/ + UINT8 DisPgCloseIdleTimeout; + +/** Offset 0x066D - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. 0x01=Default, + Rank0 is terminating and Rank1 is non-terminating +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x066E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x066F - Fivr Faults + Fivr Faults; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x0670 - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x0671 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x0672 - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x0673 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x0674 - TCSS USB Port Enable + Bitmap for per port enabling +**/ + UINT8 UsbTcPortEnPreMem; + +/** Offset 0x0675 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x0676 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0678 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0679 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x067A - WRC Feature + Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports + IO devices allocating onto the ring and into LLC. WRC is fused on by default. + $EN_DIS +**/ + UINT8 WrcFeatureEnable; + +/** Offset 0x067B +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x067C - BCLK RFI Frequency + Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz 0 - No + RFI Tuning. Range is 98Mhz-100Mhz. +**/ + UINT32 BclkRfiFreq[4]; + +/** Offset 0x068C - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x068E - Enable PCIe IMR + 0: Disable(AUTO), 1: Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x068F - Enable PCIe IMR + 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select + the Root port location from PCH PCIe or SA PCIe + $EN_DIS +**/ + UINT8 PcieImrRpLocation; + +/** Offset 0x0690 - Root port number for IMR. + Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port + from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 +**/ + UINT8 PcieImrRpSelection; + +/** Offset 0x0691 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0692 - Mem Boot Mode + 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION + 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION +**/ + UINT8 MemBootMode; + +/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom + This option is specifically needed for ASPM configuration in 2LM feature + 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto +**/ + UINT8 Peg3Aspm; + +/** Offset 0x0694 - MFVC WRR VC Arbitration + 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES + 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES +**/ + UINT8 MfvcWrrArb; + +/** Offset 0x0695 - BZM Support + 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support + $EN_DIS +**/ + UINT8 BzmSupport; + +/** Offset 0x0696 - VcId_7_0 values + Select VC ID for arbitration +**/ + UINT8 VcId_7_0[16]; + +/** Offset 0x06A6 - Set Hw Parameters enable/disable + 1: enable, 0: disable, Enable/disable setting of HW parameters + $EN_DIS +**/ + UINT8 SetHwParameters; + +/** Offset 0x06A7 +**/ + UINT8 UnusedUpdSpace19; + +/** Offset 0x06A8 - LTR L1.2 Threshold Value + LTR L1.2 Threshold Value +**/ + UINT16 Ltr_L1D2_ThVal; + +/** Offset 0x06AA - LTR L1.2 Threshold Scale + LTR L1.2 Threshold Scale +**/ + UINT8 Ltr_L1D2_ThScale; + +/** Offset 0x06AB - system power state + system power state indicates the platform power state +**/ + UINT8 SysPwrState; + +/** Offset 0x06AC - Media Death Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Media Death Notification + $EN_DIS +**/ + UINT8 MediaDeathNotification; + +/** Offset 0x06AD - Health Log Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Health Log Notification + $EN_DIS +**/ + UINT8 HealthLogNotification; + +/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification + $EN_DIS +**/ + UINT8 TempBelowThrottleNotification; + +/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification + $EN_DIS +**/ + UINT8 TempAboveThrottleNotification; + +/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification + $EN_DIS +**/ + UINT8 MissingCommitBitNotification; + +/** Offset 0x06B1 - NVMeHoldDisableBit + 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit + $EN_DIS +**/ + UINT8 NVMeHoldDisableBit; + +/** Offset 0x06B2 - Ddr4OneDpc + DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 Ddr4OneDpc; + +/** Offset 0x06B3 - Ch Hash Override POR settings + Enable/Disable Override Channel Hash Support POR values + $EN_DIS +**/ + UINT8 ChHashOverride; + +/** Offset 0x06B4 - PDA Enumeration + Enables/Disable PDA Enumeration + $EN_DIS +**/ + UINT8 PDA; + +/** Offset 0x06B5 - DPin Policy + Set DPin Policy. Internal Only:All display ports are for internal only. External + First:All display ports are for external only, if there is no External DP-In presence + presents then IOM will use all ports internal only + 0: Internal Only, 1: External First +**/ + UINT8 DpInExternalEn; + +/** Offset 0x06B6 - DPin External Ports Number + Total number of External Gfx DpIn Port present on Board. Currently hardware wise + max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports +**/ + UINT8 NumberOfDpInPort; + +/** Offset 0x06B7 - DPin External Port Connect Map + Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port. +**/ + UINT8 DpInPortConnectMap; + +/** Offset 0x06B8 - Command Pins Mapping + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. +**/ + UINT8 Lp5CccConfig[4]; + +/** Offset 0x06BC - Command Pins Mirrored + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. +**/ + UINT32 CmdMirror[1]; + +/** Offset 0x06C0 - CPU BCLK SSC Enable + Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled. + $EN_DIS +**/ + UINT8 CpuBclkSpread; + +/** Offset 0x06C1 - McParity + CMI/MC Parity Control + $EN_DIS +**/ + UINT8 McParity; + +/** Offset 0x06C2 - Vddq Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VddqVoltageOverride; + +/** Offset 0x06C4 - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x06C5 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x06C6 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x06C8 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x06C9 - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x06CA - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x06CB - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x06CC - PMR Size + Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot +**/ + UINT32 DmaBufferSize; + +/** Offset 0x06D0 - VT-d/IOMMU Boot Policy + BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS +**/ + UINT8 PreBootDmaMask; + +/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq + Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): + Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiHweq; + +/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass + CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0): Disable Phase 23 Bypass, Enabled(0x1)(Default): + Enable Phase 23 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase23Bypass; + +/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass + CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0): Disable Phase 3 Bypass, Enabled(0x1)(Default): + Enable Phase 3 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase3Bypass; + +/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable + Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local + Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter + Coefficient Override + $EN_DIS +**/ + UINT8 Gen3LtcoEnable; + +/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable + Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote + Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote + Transmitter Coefficient/Preset Override + $EN_DIS +**/ + UINT8 Gen3RtcoRtpoEnable; + +/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient + Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, + 2 is default for each lane +**/ + UINT8 DmiGen3Ltcpre[8]; + +/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient + Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default + for each lane +**/ + UINT8 DmiGen3Ltcpo[8]; + +/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCm[8]; + +/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCp[8]; + +/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable + Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, + Manual(0x1): Enable DmiGen3DsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3DsPresetEnable; + +/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3DsPortRxPreset[8]; + +/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3DsPortTxPreset[8]; + +/** Offset 0x0707 - Program DMI GEN3 Extended number of VC + (DEPRECATED) +**/ + UINT8 DmiGen3MultiVC; + +/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3Vc1Control; + +/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3VcMControl; + +/** Offset 0x070A - DMI Secure Register Lock:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiSrl; + +/** Offset 0x070B - DMI Scramble Enable:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiScramble; + +/** Offset 0x070C - DMI Max Payload Size:{Combo + (DEPRECATED) + 0:Auto, 1:128 TLP, 2:256 TLP +**/ + UINT8 DmiMaxPayload; + +/** Offset 0x070D - DPin Dynamic Switch Policy + Dynamic one-time switch from iGFx to dGFx after boot to OS + 0: Disble, 1: Enable +**/ + UINT8 DPinDynamicSwitch; + +/** Offset 0x070E - Delay before sending commn + Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this + value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default + is 0 second +**/ + UINT16 DPinDynamicSwitchDelay0; + +/** Offset 0x0710 - Delay before IOM de-assert HPD + Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending + dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second +**/ + UINT16 DPinDynamicSwitchDelay1; + +/** Offset 0x0712 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[28]; + +/** Offset 0x072E - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0730 - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x0732 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[12]; + +/** Offset 0x073E - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x073F - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x0740 - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x0741 - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x0743 - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x0744 - Enable HDA SDI lanes + Enable/disable HDA SDI lanes. +**/ + UINT8 PchHdaSdiEnable[2]; + +/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x0747 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0749 +**/ + UINT8 UnusedUpdSpace20[3]; + +/** Offset 0x074C - DMIC ClkA Pin Muxing (N - DMIC number) + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKA_* +**/ + UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; + +/** Offset 0x0754 - DMIC ClkB Pin Muxing + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKB_* +**/ + UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; + +/** Offset 0x075C - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace21[3]; + +/** Offset 0x0760 - DMIC Data Pin Muxing + Determines DMIC Data Pin muxing. See GPIO_*_MUXING_DMIC_DATA_* +**/ + UINT32 PchHdaAudioLinkDmicDataPinMux[2]; + +/** Offset 0x0768 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x076E - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x0772 - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x0773 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x0774 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x0775 - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0776 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0777 - ME DID Message + (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable + will prevent the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x0778 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0779 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x077A - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x077B - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1 + Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie1Rtd3Gpio[24]; + +/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2 + Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie2Rtd3Gpio[24]; + +/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3 + Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie3Rtd3Gpio[24]; + +/** Offset 0x089C - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x089D - PCI Express Dekel Workaround + Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum, + default is 2 +**/ + UINT8 CpuPcieRpDekelSquelchWa; + +/** Offset 0x089E - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x089F +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugRxPinMux; + +/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugTxPinMux; + +/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartDebugRtsPinMux; + +/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartDebugCtsPinMux; + +/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor + AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 + in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; + +/** Offset 0x08B2 - Lane Used of CSI port + Lane Used of each CSI port + 1:x1, 2:x2, 3:x3, 4:x4, 8:x8 +**/ + UINT8 IpuLaneUsed[8]; + +/** Offset 0x08BA - Lane Used of CSI port + Speed of each CSI port + 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps +**/ + UINT8 CsiSpeed[8]; + +/** Offset 0x08C2 - DPmem Support + 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support + $EN_DIS +**/ + UINT8 DpmemSupport; + +/** Offset 0x08C3 - Core VF Point Offset Mode + Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes; + 0: Legacy; 1: Selection. + 0:Legacy, 1:Selection +**/ + UINT8 CoreVfPointOffsetMode; + +/** Offset 0x08C4 - Core VF Point Offset + Array used to specifies the Offset Voltage applied to the each selected Core VF + Point. This voltage is specified in millivolts. +**/ + UINT16 CoreVfPointOffset[15]; + +/** Offset 0x08E2 - Core VF Point Offset Prefix + Sets the CoreVfPointOffset value as positive or negative for corresponding core + VF Point; 0: Positive ; 1: Negative. + 0:Positive, 1:Negative +**/ + UINT8 CoreVfPointOffsetPrefix[15]; + +/** Offset 0x08F1 - Core VF Point Ratio + Array for the each selected Core VF Point to display the ration. +**/ + UINT8 CoreVfPointRatio[15]; + +/** Offset 0x0900 - Core VF Point Count + Number of supported Core Voltage & Frequency Point Offset +**/ + UINT8 CoreVfPointCount; + +/** Offset 0x0901 - Enable CPU CrashLog GPRs dump + Enable or Disable CPU CrashLog GPRs dump; 0: Disable; 1: Enable; 2: Only + disable Smm GPRs dump + 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled +**/ + UINT8 CrashLogGprs; + +/** Offset 0x0902 +**/ + UINT8 UnusedUpdSpace23[2]; + +/** Offset 0x0904 - Bitmask of disable cores + Core mask is a bitwise indication of which core should be disabled. 0x00=Default; + Bit 0 - core 0, bit 7 - core 7. +**/ + UINT32 DisableCoreMask; + +/** Offset 0x0908 - REFRESH_PANIC_WM + Refresh Panic Watermark, range 1-8, Default is 8 +**/ + UINT8 RefreshPanicWm; + +/** Offset 0x0909 - REFRESH_HP_WM + Refresh High Priority Watermark, range 1-7, Default is 7 +**/ + UINT8 RefreshHpWm; + +/** Offset 0x090A - Support Unlimited ICCMAX + Support Unlimited ICCMAX more than maximum value 255.75A; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 UnlimitedIccMax; + +/** Offset 0x090B - Per Core Max Ratio override + Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new + favored core ratio to each Core. 0: Disable, 1: enable + $EN_DIS +**/ + UINT8 PerCoreRatioOverride; + +/** Offset 0x090C - Per Core Current Max Ratio + Array for the Per Core Max Ratio +**/ + UINT8 PerCoreRatio[10]; + +/** Offset 0x0916 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x0917 +**/ + UINT8 UnusedUpdSpace24; + +/** Offset 0x0918 - Margin Limit L2 + % of L1 check for margin limit check +**/ + UINT16 MarginLimitL2; + +/** Offset 0x091A - Iotg Pll SscEn + Enable or disable CPU SSC. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 IotgPllSscEn; + +/** Offset 0x091B - GPIO Override + Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings + before moved to FSP. Available configurations 0: Disable;1: Level 1 - skips GpioSetNativePadByFunction;Level + 2 - skips GpioSetNativePadByFunction and GpioSetPadMode +**/ + UINT8 GpioOverride; + +/** Offset 0x091C - Write0 enabling + Enable/Disable Write0 + $EN_DIS +**/ + UINT8 WRITE0; + +/** Offset 0x091D +**/ + UINT8 UnusedUpdSpace25[3]; + +/** Offset 0x0920 +**/ + UINT32 VccInVoltageOverride; + +/** Offset 0x0924 - Dynamic Memory Timings Changes + Dynamic Memory Timings Changes; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 DynamicMemoryChange; + +/** Offset 0x0925 - IbeccErrorInj + In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable + this option for production systems. + $EN_DIS +**/ + UINT8 IbeccErrorInj; + +/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable + Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, + Manual(0x1): Enable DmiGen3UsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3UsPresetEnable; + +/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3UsPortRxPreset[8]; + +/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3UsPortTxPreset[8]; + +/** Offset 0x0937 - BCLK Frequency Source + Clock source of BCLK OC frequency, 0:CPU BCLK, 1:PCH BCLK, 2:External CLK + 0:CPU BCLK, 1:PCH BCLK, 2:External CLK +**/ + UINT8 BclkSource; + +/** Offset 0x0938 - CPU BCLK OC Frequency + CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz 0 + - Auto. Range is 8000-50000 (10KHz). +**/ + UINT32 CpuBclkOcFrequency; + +/** Offset 0x093C - Ring CCF Auto Gv Disable Down + Ring CCF Auto Gv Disable Down, 0: Disabled, 1:Fused default + 0:Disabled, 1:Fused default +**/ + UINT8 RingCcfAutoGvDisable; + +/** Offset 0x093D - SA/Uncore voltage mode + SA/Uncore voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 SaVoltageMode; + +/** Offset 0x093E - SA/Uncore Voltage Override + The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override + mode. Valid Range 0 to 2000 +**/ + UINT16 SaVoltageOverride; + +/** Offset 0x0940 - SA/Uncore Extra Turbo voltage + Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode. + Valid Range 0 to 2000 +**/ + UINT16 SaExtraTurboVoltage; + +/** Offset 0x0942 +**/ + UINT8 UnusedUpdSpace26[5]; + +/** Offset 0x0947 +**/ + UINT8 ReservedFspmUpd2[1]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0948 +**/ + UINT8 UnusedUpdSpace27[6]; + +/** Offset 0x094E +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/models/galp5/FSP/Include/FspsUpd.h b/models/galp5/FSP/Include/FspsUpd.h new file mode 100644 index 0000000..7537647 --- /dev/null +++ b/models/galp5/FSP/Include/FspsUpd.h @@ -0,0 +1,4201 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x002C - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x0030 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x0034 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x0035 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x0036 +**/ + UINT8 UnusedUpdSpace0[2]; + +/** Offset 0x0038 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x003C - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0040 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0041 - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0042 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x004A - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x0052 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0062 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x006C - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x006D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x0074 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0075 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x007D - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x007E - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x007F - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x0080 - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x0081 - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x0082 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0084 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0089 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x008A - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x008B - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[7]; + +/** Offset 0x0092 - SPI Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, + 1:SerialIoSpiCsActiveHigh +**/ + UINT8 SerialIoSpiCsPolarity[14]; + +/** Offset 0x00A0 - SPI Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpiCsEnable[14]; + +/** Offset 0x00AE - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[7]; + +/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[7]; + +/** Offset 0x00BC - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[7]; + +/** Offset 0x00C3 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x00CA +**/ + UINT8 UnusedUpdSpace3[2]; + +/** Offset 0x00CC - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x00E8 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x00EF - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x00F6 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x0112 +**/ + UINT8 UnusedUpdSpace4[2]; + +/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMuxPolicy[7]; + +/** Offset 0x0130 - SerialIoUartCtsPinMuxPolicy + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMuxPolicy[7]; + +/** Offset 0x014C - SerialIoUartRxPinMuxPolicy + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMuxPolicy[7]; + +/** Offset 0x0168 - SerialIoUartTxPinMuxPolicy + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMuxPolicy[7]; + +/** Offset 0x0184 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, + 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used + for debug purpose. + 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0185 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; 0: Disable; + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[7]; + +/** Offset 0x018C - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x0194 - Serial IO I2C SDA Pin Muxing + Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for + possible values. +**/ + UINT32 PchSerialIoI2cSdaPinMux[8]; + +/** Offset 0x01B4 - Serial IO I2C SCL Pin Muxing + Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for + possible values. +**/ + UINT32 PchSerialIoI2cSclPinMux[8]; + +/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[8]; + +/** Offset 0x01DC - ISH GP GPIO Pin Muxing + Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER +**/ + UINT32 IshGpGpioPinMuxing[8]; + +/** Offset 0x01FC - ISH UART Rx Pin Muxing + Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* +**/ + UINT32 IshUartRxPinMuxing[3]; + +/** Offset 0x0208 - ISH UART Tx Pin Muxing + Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* +**/ + UINT32 IshUartTxPinMuxing[3]; + +/** Offset 0x0214 - ISH UART Rts Pin Muxing + Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. +**/ + UINT32 IshUartRtsPinMuxing[3]; + +/** Offset 0x0220 - ISH UART Rts Pin Muxing + Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. +**/ + UINT32 IshUartCtsPinMuxing[3]; + +/** Offset 0x022C - ISH I2C SDA Pin Muxing + Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. +**/ + UINT32 IshI2cSdaPinMuxing[3]; + +/** Offset 0x0238 - ISH I2C SCL Pin Muxing + Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. +**/ + UINT32 IshI2cSclPinMuxing[3]; + +/** Offset 0x0244 - ISH SPI MOSI Pin Muxing + Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. +**/ + UINT32 IshSpiMosiPinMuxing[2]; + +/** Offset 0x024C - ISH SPI MISO Pin Muxing + Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. +**/ + UINT32 IshSpiMisoPinMuxing[2]; + +/** Offset 0x0254 - ISH SPI CLK Pin Muxing + Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. +**/ + UINT32 IshSpiClkPinMuxing[2]; + +/** Offset 0x025C - ISH SPI CS#N Pin Muxing + Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS_* for possible + values. N-SPI number, 0-1. +**/ + UINT32 IshSpiCsPinMuxing[4]; + +/** Offset 0x026C - ISH GP GPIO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination + respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index + 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 +**/ + UINT8 IshGpGpioPadTermination[8]; + +/** Offset 0x0274 - ISH UART Rx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 + Rx, and so on. +**/ + UINT8 IshUartRxPadTermination[3]; + +/** Offset 0x0277 - ISH UART Tx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 + Tx, and so on. +**/ + UINT8 IshUartTxPadTermination[3]; + +/** Offset 0x027A - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 + Rts, and so on. +**/ + UINT8 IshUartRtsPadTermination[3]; + +/** Offset 0x027D - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 + Cts, and so on. +**/ + UINT8 IshUartCtsPadTermination[3]; + +/** Offset 0x0280 - ISH I2C SDA Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, + and so on. +**/ + UINT8 IshI2cSdaPadTermination[3]; + +/** Offset 0x0283 - ISH I2C SCL Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, + and so on. +**/ + UINT8 IshI2cSclPadTermination[3]; + +/** Offset 0x0286 - ISH SPI MOSI Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 + Mosi, and so on. +**/ + UINT8 IshSpiMosiPadTermination[2]; + +/** Offset 0x0288 - ISH SPI MISO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 + Miso, and so on. +**/ + UINT8 IshSpiMisoPadTermination[2]; + +/** Offset 0x028A - ISH SPI CLK Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, + and so on. +**/ + UINT8 IshSpiClkPadTermination[2]; + +/** Offset 0x028C - ISH SPI CS#N Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination + respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 + Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 +**/ + UINT8 IshSpiCsPadTermination[4]; + +/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned + Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs + number: 0-1 +**/ + UINT8 PchIshSpiCsEnable[4]; + +/** Offset 0x0294 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x02A4 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x02B4 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x02C4 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x02D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x02DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + Default = 29h (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x02E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x02F2 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], Default + = 00h. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x02FC +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x0306 +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x0310 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x031A +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x0324 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x032E +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x0338 +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x0342 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x034C - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x034D - Enable PCH TSN + Enable/disable TSN on the PCH. + $EN_DIS +**/ + UINT8 PchTsnEnable; + +/** Offset 0x034E - TSN Link Speed + Set TSN Link Speed. + 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps +**/ + UINT8 PchTsnLinkSpeed; + +/** Offset 0x034F +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0350 - PCH TSN0 MAC Address High Bits + Set TSN0 MAC Address High. +**/ + UINT32 PchTsn0MacAddressHigh; + +/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits + Set TSN0 MAC Address Low. +**/ + UINT32 PchTsn0MacAddressLow; + +/** Offset 0x0358 - PCIe PTM enable/disable + Enable/disable Precision Time Measurement for PCIE Root Ports. +**/ + UINT8 PciePtm[24]; + +/** Offset 0x0370 - PCIe DPC enable/disable + Enable/disable Downstream Port Containment for PCIE Root Ports. +**/ + UINT8 PcieDpc[24]; + +/** Offset 0x0388 - PCIe DPC extensions enable/disable + Enable/disable Downstream Port Containment Extensions for PCIE Root Ports. +**/ + UINT8 PcieEdpc[24]; + +/** Offset 0x03A0 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x03A1 +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x03A4 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x03A9 - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x03AB - Mask to enable the platform configuration of external V1p05 VR rail + External V1P05 Rail Supported Configuration +**/ + UINT8 PchFivrExtV1p05RailSupportedVoltageStates; + +/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x03AE - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x03B0 - Mask to enable the platform configuration of external Vnn VR rail + External Vnn Rail Supported Configuration +**/ + UINT8 PchFivrExtVnnRailSupportedVoltageStates; + +/** Offset 0x03B1 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x03BA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x03BE +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x03C0 - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x03C4 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x03C5 +**/ + UINT8 UnusedUpdSpace9[3]; + +/** Offset 0x03C8 - Pointer of ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x03CC - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x03D0 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x03D1 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x03D2 - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtV1p05RailIccMaximum; + +/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailIccMaximum; + +/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailSxIccMaximum; + +/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL) + Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves + addresseses from range 0x0 - 0x7FF + $EN_DIS +**/ + UINT8 PchEspiLockLinkConfiguration; + +/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable + Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads. + 0: disabled (default), 1: enabled + $EN_DIS +**/ + UINT8 PchSpiExtendedBiosDecodeRangeEnable; + +/** Offset 0x03DA - Enforce Enhanced Debug Mode + Determine if ME should enter Enhanced Debug Mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 EnforceEDebugMode; + +/** Offset 0x03DB - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd[1]; + +/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base + Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeBase; + +/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit + Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeLimit; + +/** Offset 0x03E4 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x03E5 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x03E6 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x03E7 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x03E8 - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default) + or GPP_F4 = 0x194CE404. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x03EC - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default) + or GPP_F5 = 0x394CE605. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in + GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x03F0 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x03F2 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x03F3 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x03F4 - External V1P05 Control Ramp Timer value + Hold off time to be used when changing the v1p05_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtV1p05RailCtrlRampTmr; + +/** Offset 0x03F5 - External VNN Control Ramp Timer value + Hold off time to be used when changing the vnn_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtVnnRailCtrlRampTmr; + +/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config + Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, + 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte + for each port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlpResetConfig[8]; + +/** Offset 0x03FE - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + DEPRECATED 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x03FF - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x0400 - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x0401 - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x0402 - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x0403 - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x0404 - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x0405 - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x0406 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0407 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0408 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x040A - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x040C - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x040D - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x040E - Force MEBX execution + Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x040F - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x043F - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x0457 +**/ + UINT8 UnusedUpdSpace13[1]; + +/** Offset 0x0458 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x0489 - V1p05-PHY supply external FET control + Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05PhyExtFetControlEn; + +/** Offset 0x048A - V1p05-IS supply external FET control + Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05IsExtFetControlEn; + +/** Offset 0x048B - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x048C - CdClock Frequency selection + 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: + 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz + 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz, + 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x048D - Enable/Disable PeiGraphicsPeimInit + Enable(Default): FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. + Disable: FSP will NOT initialize the framebuffer. + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x048E - Enable D3 Hot in TCSS + This policy will enable/disable D3 hot support in IOM + $EN_DIS +**/ + UINT8 D3HotEnable; + +/** Offset 0x048F - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x0490 - TypeC port GPIO setting + GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Tgl + = TigerLake) +**/ + UINT32 IomTypeCPortPadCfg[8]; + +/** Offset 0x04B0 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[8]; + +/** Offset 0x04B8 - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4 + Enable/Disable PCIe tunneling for USB4, default is enable + $EN_DIS +**/ + UINT8 ITbtPcieTunnelingForUsb4; + +/** Offset 0x04BA - Enable/Disable SkipFspGop + Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver + $EN_DIS +**/ + UINT8 SkipFspGop; + +/** Offset 0x04BB - TC State in TCSS + This TC C-State Limit in IOM +**/ + UINT8 TcCstateLimit; + +/** Offset 0x04BC - SaPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 SaPostMemRsvd[5]; + +/** Offset 0x04C1 - Enable VMD controller + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdEnable; + +/** Offset 0x04C2 - Enable VMD portA Support + Enable/disable to VMD portA Support. + $EN_DIS +**/ + UINT8 VmdPortA; + +/** Offset 0x04C3 - Enable VMD portB Support + Enable/disable to VMD portB Support. + $EN_DIS +**/ + UINT8 VmdPortB; + +/** Offset 0x04C4 - Enable VMD portC Support + Enable/disable to VMD portC Support. + $EN_DIS +**/ + UINT8 VmdPortC; + +/** Offset 0x04C5 - Enable VMD portD Support + Enable/disable to VMD portD Support. + $EN_DIS +**/ + UINT8 VmdPortD; + +/** Offset 0x04C6 - VMD Config Bar size + Set The VMD Config Bar Size. +**/ + UINT8 VmdCfgBarSize; + +/** Offset 0x04C7 - VMD Config Bar Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default) + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdCfgBarAttr; + +/** Offset 0x04C8 - VMD Mem Bar1 size + Set The VMD Mem Bar1 Size. +**/ + UINT8 VmdMemBarSize1; + +/** Offset 0x04C9 - VMD Mem Bar1 Attributes + 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar1Attr; + +/** Offset 0x04CA - VMD Mem Bar2 size + Set The VMD Mem Bar2 Size. +**/ + UINT8 VmdMemBarSize2; + +/** Offset 0x04CB - VMD Mem Bar2 Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar2Attr; + +/** Offset 0x04CC - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x04CD +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x04CE - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x04D0 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x04D2 - USB override in IOM + This policy will enable/disable USB Connect override in IOM + $EN_DIS +**/ + UINT8 UsbOverride; + +/** Offset 0x04D3 - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x04D4 - ITBT Root Port Enable + ITBT Root Port Enable, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 ITbtPcieRootPortEn[4]; + +/** Offset 0x04D8 - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x04DA - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x04DC - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x04DD - TCSS Usb3 Compliance Mode Enable + Used by IOM FW to skip powering down the PHY at the end of disconnect flow + $EN_DIS +**/ + UINT8 Usb3ComplModeEnable; + +/** Offset 0x04DE - ITBT DMA LTR + TCSS DMA1, DMA2 LTR value +**/ + UINT16 ITbtDmaLtr[2]; + +/** Offset 0x04E2 - Enable/Disable CrashLog + Deprecated. Move to PreMem + $EN_DIS +**/ + UINT8 DeprecatedCpuCrashLogEnable; + +/** Offset 0x04E3 - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x04E7 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x04F3 +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x050C - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x0510 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x0514 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0515 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; 1: Enable. + For all VR Indexes +**/ + UINT8 Psi3Enable[5]; + +/** Offset 0x051A - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 Psi4Enable[5]; + +/** Offset 0x051F +**/ + UINT8 UnusedUpdSpace16[1]; + +/** Offset 0x0520 - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes +**/ + UINT16 ImonSlope[5]; + +/** Offset 0x052A - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. 0: Auto +**/ + UINT16 ImonOffset[5]; + +/** Offset 0x0534 - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; 0: Disable; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable[5]; + +/** Offset 0x0539 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; 0: Disable; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable[5]; + +/** Offset 0x053E - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - + 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index +**/ + UINT8 TdcTimeWindow[5]; + +/** Offset 0x0543 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock[5]; + +/** Offset 0x0548 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. 0 - Auto Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x0549 +**/ + UINT8 PsysOffset; + +/** Offset 0x054A - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. 0: False; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisable[5]; + +/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains + Slew Rate configuration for Deep Package C States for VR domains based on Acoustic + Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRate[5]; + +/** Offset 0x0555 - Enable multi phases silicon initialization + A switch to determine MultiPhaseSiInit will be executed or not + $EN_DIS +**/ + UINT8 EnableMultiPhaseSiliconInit; + +/** Offset 0x0556 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. 0: Auto. For all VR Indexes +**/ + UINT16 TdcCurrentLimit[5]; + +/** Offset 0x0560 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline[5]; + +/** Offset 0x056A - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 DcLoadline[5]; + +/** Offset 0x0574 - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold[5]; + +/** Offset 0x057E - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold[5]; + +/** Offset 0x0588 - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold[5]; + +/** Offset 0x0592 - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax[5]; + +/** Offset 0x059C - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit[5]; + +/** Offset 0x05A6 - Enable VR specific mailbox command + VR specific mailbox commands. 00b - no VR specific command sent. 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x05A7 - Reserved + Reserved +**/ + UINT8 Reserved2; + +/** Offset 0x05A8 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x05A9 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize; 1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x05AA - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. 0: + Auto. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x05AC - FIVR RFI Spread Spectrum + Set the Spread Spectrum Range. 1.5%; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, + 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1% + = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44. +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x05AD +**/ + UINT8 UnusedUpdSpace17[3]; + +/** Offset 0x05B0 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x05B4 - CpuMpPpi + Optional pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. +**/ + UINT32 CpuMpPpi; + +/** Offset 0x05B8 - CpuMpHob + @deprecated This is not needed in current version of FSP. +**/ + UINT32 CpuMpHob; + +/** Offset 0x05BC - RFI Mitigation + Enable or Disable RFI Mitigation. 0: Disable - DCM is the IO_N default; 1: + Enable - Enable IO_N DCM/CCM switching as RFI mitigation. + $EN_DIS +**/ + UINT8 RfiMitigation; + +/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable + Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; 1: Enable +**/ + UINT8 FivrSpectrumEnable; + +/** Offset 0x05BE - Pre Wake Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled. Range 0-255 0. +**/ + UINT8 PreWake; + +/** Offset 0x05BF - Ramp Up Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampUp; + +/** Offset 0x05C0 - Ramp Down Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampDown; + +/** Offset 0x05C1 +**/ + UINT8 CpuPostMemRsvd[11]; + +/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number + Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this + flag is set) for PPIN Support + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x05CD - Enable or Disable Minimum Voltage Override + Enable or disable Minimum Voltage overrides ; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableMinVoltageOverride; + +/** Offset 0x05CE - Min Voltage for Runtime + PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride + = 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageRuntime; + +/** Offset 0x05D0 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x05D8 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x05DC - Min Voltage for C8 + PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = + 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageC8; + +/** Offset 0x05DE - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. 0 - Auto Units 1/1000, + Range 0-63999. For an offset of 25.348, enter 25348. +**/ + UINT16 PsysOffset1; + +/** Offset 0x05E0 - Smbios Type4 Max Speed Override + Provide the option for platform to override the MaxSpeed field of Smbios Type 4. + If this value is not zero, it dominates the field. +**/ + UINT16 SmbiosType4MaxSpeedOverride; + +/** Offset 0x05E2 - AvxDisable + Enable or Disable AVX Support. + 0: Enable, 1: Disable +**/ + UINT8 AvxDisable; + +/** Offset 0x05E3 - Avx3Disable + Enable or Disable AVX3 Support + 0: Enable, 1: Disable +**/ + UINT8 Avx3Disable; + +/** Offset 0x05E4 - ReservedCpuPostMemProduction + Reserved for CPU Post-Mem Production + $EN_DIS +**/ + UINT8 ReservedCpuPostMemProduction[4]; + +/** Offset 0x05E8 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x05F3 +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x05F4 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x05FE - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x0608 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x0609 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x060A - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd4[3]; + +/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned + Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiCs0Enable[1]; + +/** Offset 0x060E - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x060F - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x0610 - Enable PCH ISH SPI pins assigned + Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiEnable[1]; + +/** Offset 0x0611 - Enable PCH ISH UART pins assigned + Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshUartEnable[2]; + +/** Offset 0x0613 - Enable PCH ISH I2C pins assigned + Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI2cEnable[3]; + +/** Offset 0x0616 - Enable PCH ISH GP pins assigned + Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshGpEnable[8]; + +/** Offset 0x061E - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0621 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0622 - RTC BIOS Interface Lock + Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. + $EN_DIS +**/ + UINT8 RtcBiosInterfaceLock; + +/** Offset 0x0623 - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x0624 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x063C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x066C - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x0684 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x069C - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x06B4 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x06CC - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x06E4 - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x06FC - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x072C - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x0744 - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x075C - Touch Host Controller Port 0 Assignment + Assign THC Port 0 + 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0 +**/ + UINT8 ThcPort0Assignment; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux + Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort0InterruptPinMuxing; + +/** Offset 0x0764 - Touch Host Controller Port 1 Assignment + Assign THC Port 1 + 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1 +**/ + UINT8 ThcPort1Assignment; + +/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency + Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1ReadFrequency; + +/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency + Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1WriteFrequency; + +/** Offset 0x0767 +**/ + UINT8 UnusedUpdSpace20; + +/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux + Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort1InterruptPinMuxing; + +/** Offset 0x076C - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x0784 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x079C - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x07B4 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x07CC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x07E4 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x07FC - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x0814 - PCIe override default settings for EQ + Choose PCIe EQ method + $EN_DIS +**/ + UINT8 PcieEqOverrideDefault; + +/** Offset 0x0815 - PCIe choose EQ method + Choose PCIe EQ method + 0: HardwareEq, 1: FixedEq +**/ + UINT8 PcieEqMethod; + +/** Offset 0x0816 - PCIe choose EQ mode + Choose PCIe EQ mode + 0: PresetEq, 1: CoefficientEq +**/ + UINT8 PcieEqMode; + +/** Offset 0x0817 - PCIe EQ local transmitter override + Enable/Disable local transmitter override + $EN_DIS +**/ + UINT8 PcieEqLocalTransmitterOverrideEnable; + +/** Offset 0x0818 - PCIe number of valid list entries + Select number of presets or coefficients depending on the mode +**/ + UINT8 PcieEqPh3NumberOfPresetsOrCoefficients; + +/** Offset 0x0819 - PCIe pre-cursor coefficient list + Provide a list of pre-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PreCursorList[10]; + +/** Offset 0x0823 - PCIe post-cursor coefficient list + Provide a list of post-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PostCursorList[10]; + +/** Offset 0x082D - PCIe preset list + Provide a list of presets to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PresetList[11]; + +/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset + Allows to select the downstream port preset value that will be used during phase + 1 of equalization +**/ + UINT32 PcieEqPh1DownstreamPortTransmitterPreset; + +/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset + Allows to select the upstream port preset value that will be used during phase 1 + of equalization +**/ + UINT32 PcieEqPh1UpstreamPortTransmitterPreset; + +/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset + Allows to select the value of the preset used during phase 2 local transmitter override +**/ + UINT8 PcieEqPh2LocalTransmitterOverridePreset; + +/** Offset 0x0841 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0842 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0843 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen3ProgramStaticEq; + +/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming + Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen4ProgramStaticEq; + +/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x0847 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x0848 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x0849 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x084B - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x084D - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x084E - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x084F - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0850 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0851 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0852 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0853 - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x0854 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0855 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0856 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0858 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0859 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x085B - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x085C - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x085D - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x085E - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x085F - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x0860 - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0861 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x0869 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x0871 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x0879 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x0881 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x0889 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0891 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x0899 +**/ + UINT8 UnusedUpdSpace21[1]; + +/** Offset 0x089A - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x08AA - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x08B3 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x08B4 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x08B5 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x08B6 - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x08B7 - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x08BA - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x08BB - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x08BC - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x08BD - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x08C7 - UFS enable/disable + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x08C9 - IEH Mode + Integrated Error Handler Mode, 0: Bypass, 1: Enable + 0: Bypass, 1:Enable +**/ + UINT8 IehMode; + +/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x08D0 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x08D1 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x08D2 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x08D3 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x08D4 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x08D7 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x08D8 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x08D9 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x08DA - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x08DB - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x08DC - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x08DD - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x08DE - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x08DF - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x08E0 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x08E1 - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x08E2 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x08E3 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x08E5 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x08E8 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x08E9 - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x08EB - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x08ED - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x08EF +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08F0 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x08F2 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0902 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x090C - Enable xHCI LTR override + Enables override of recommended LTR values for xHCI + $EN_DIS +**/ + UINT8 PchUsbLtrOverrideEnable; + +/** Offset 0x090D +**/ + UINT8 UnusedUpdSpace23[3]; + +/** Offset 0x0910 - xHCI High Idle Time LTR override + Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting +**/ + UINT32 PchUsbLtrHighIdleTimeOverride; + +/** Offset 0x0914 - xHCI Medium Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting +**/ + UINT32 PchUsbLtrMediumIdleTimeOverride; + +/** Offset 0x0918 - xHCI Low Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting +**/ + UINT32 PchUsbLtrLowIdleTimeOverride; + +/** Offset 0x091C - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x091D - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x091E - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x091F - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x0920 - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode + Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. + Default is 0: Disabled + 0: Disabled, 1: Dynamic Configuration +**/ + UINT8 HybridStorageMode; + +/** Offset 0x0922 +**/ + UINT8 UnusedUpdSpace24[6]; + +/** Offset 0x0928 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0948 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x094C +**/ + UINT8 UnusedUpdSpace25[4]; + +/** Offset 0x0950 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0958 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x0960 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x0961 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x0962 +**/ + UINT8 UnusedUpdSpace26[6]; + +/** Offset 0x0968 - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x0970 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x0978 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x0979 - Si Config CSM Flag. + @deprecated Platform specific common policies that used by several silicon + components. CSM status flag. + $EN_DIS +**/ + UINT8 SiCsmFlag; + +/** Offset 0x097A - Skip Ssid Programming. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + $EN_DIS +**/ + UINT8 SiSkipSsidProgramming; + +/** Offset 0x097B +**/ + UINT8 UnusedUpdSpace27; + +/** Offset 0x097C - Change Default SVID + Change the default SVID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSvid; + +/** Offset 0x097E - Change Default SSID + Change the default SSID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSsid; + +/** Offset 0x0980 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0984 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x0986 - USB2 Port Reset Message Enable + 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message +**/ + UINT8 PortResetMessageEnable[16]; + +/** Offset 0x0996 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0997 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. 1: Enable ME Unconfig On Rtc Clear. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0998 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x099A - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x099B - PchDmiCwbEnable + Central Write Buffer feature configurable and enabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x099C - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x099D - S0ix Auto-Demotion + Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. + $EN_DIS +**/ + UINT8 PchS0ixAutoDemotion; + +/** Offset 0x099E - Latch Events C10 Exit + When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are + captured on C10 exit (instead of C10 entry which is default) + $EN_DIS +**/ + UINT8 PchPmLatchEventsC10Exit; + +/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm + CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieEqPh3LaneParamCm[32]; + +/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp + CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieEqPh3LaneParamCp[32]; + +/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCm[5]; + +/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCp[5]; + +/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCm[5]; + +/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCp[5]; + +/** Offset 0x09F3 - Gen3 Root port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen3RootPortPreset[20]; + +/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen4RootPortPreset[20]; + +/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen3EndPointPreset[20]; + +/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen4EndPointPreset[20]; + +/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane + Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen3EndPointHint[20]; + +/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane + Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen4EndPointHint[20]; + +/** Offset 0x0A6B - CPU PCIe Fia Programming + Load Fia configuration if enable. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieFiaProgramming; + +/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating + Describes whether the PCI Express Clock Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieClockGating; + +/** Offset 0x0A6D - CPU PCIe RootPort Power Gating + Describes whether the PCI Express Power Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPciePowerGating; + +/** Offset 0x0A6E - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 CpuPcieComplianceTestMode; + +/** Offset 0x0A6F - PCIE Secure Register Lock + Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled, + load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 CpuPcieSetSecuredRegisterLock; + +/** Offset 0x0A70 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 CpuPcieEnablePeerMemoryWrite; + +/** Offset 0x0A71 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 CpuPcieRpFunctionSwap; + +/** Offset 0x0A72 - PCI Express Slot Selection + Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default). + $EN_DIS +**/ + UINT8 CpuPcieSlotSelection; + +/** Offset 0x0A73 +**/ + UINT8 UnusedUpdSpace28; + +/** Offset 0x0A74 - CPU PCIE device override table pointer + The PCIe device table is being used to override PCIe device ASPM settings. This + is a pointer points to a 32bit address. And it's only used in PostMem phase. Please + refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId + must be 0. +**/ + UINT32 CpuPcieDeviceOverrideTablePtr; + +/** Offset 0x0A78 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 CpuPcieRpHotPlug[4]; + +/** Offset 0x0A7C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 CpuPcieRpPmSci[4]; + +/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 CpuPcieRpTransmitterHalfSwing[4]; + +/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 CpuPcieRpAcsEnabled[4]; + +/** Offset 0x0A88 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 CpuPcieRpEnableCpm[4]; + +/** Offset 0x0A8C - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 CpuPcieRpAdvancedErrorReporting[4]; + +/** Offset 0x0A90 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 CpuPcieRpUnsupportedRequestReport[4]; + +/** Offset 0x0A94 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpFatalErrorReport[4]; + +/** Offset 0x0A98 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpNoFatalErrorReport[4]; + +/** Offset 0x0A9C - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 CpuPcieRpCorrectableErrorReport[4]; + +/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnFatalError[4]; + +/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnNonFatalError[4]; + +/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnCorrectableError[4]; + +/** Offset 0x0AAC - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD. +**/ + UINT8 CpuPcieRpMaxPayload[4]; + +/** Offset 0x0AB0 - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcEnabled[4]; + +/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcExtensionsEnabled[4]; + +/** Offset 0x0AB8 - CPU PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 CpuPcieRpSlotImplemented[4]; + +/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen3EqPh3Method[4]; + +/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method + PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen4EqPh3Method[4]; + +/** Offset 0x0AC4 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 CpuPcieRpPhysicalSlotNumber[4]; + +/** Offset 0x0AC8 - PCIE RP Aspm + The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable; + 2: CpuPcieAspmL1(Default) +**/ + UINT8 CpuPcieRpAspm[4]; + +/** Offset 0x0ACC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). + Default is CpuPcieL1SubstatesL1_1_2. +**/ + UINT8 CpuPcieRpL1Substates[4]; + +/** Offset 0x0AD0 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 CpuPcieRpLtrEnable[4]; + +/** Offset 0x0AD4 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 CpuPcieRpLtrConfigLock[4]; + +/** Offset 0x0AD8 - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. [ALIAS_NAME RpPtmBytes] +**/ + UINT8 CpuPcieRpPtmEnabled[4]; + +/** Offset 0x0ADC - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 CpuPcieRpDetectTimeoutMs[4]; + +/** Offset 0x0AE4 - VC for PCIE RP Mask + Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpVcEnabled[4]; + +/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask + Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpMultiVcEnabled[4]; + +/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], Default + = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x0B3C - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x0B3D - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x0B3F - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0B40 - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x0B41 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x0B42 - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x0B43 - Enable/Disable CdClock Init + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock if not initialized by Gfx PEIM + $EN_DIS +**/ + UINT8 SkipCdClockInit; + +/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met) + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 RC1pFreqEnable; + +/** Offset 0x0B45 - Enable TSN Multi-VC + Enable/disable Multi Virtual Channels(VC) in TSN. + $EN_DIS +**/ + UINT8 PchTsnMultiVcEnable; + +/** Offset 0x0B46 - SaPostMemTestRsvd + Reserved for SA Post-Mem Test + $EN_DIS +**/ + UINT8 SaPostMemTestRsvd[13]; + +/** Offset 0x0B53 - RSR feature + Enable or Disable RSR feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableRsr; + +/** Offset 0x0B54 - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x0B55 - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x0B56 - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x0B57 - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x0B58 - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; 1: Enable; + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x0B59 - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; 1: Enabled 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x0B5A - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x0B5B - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. 0 : Disable; 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x0B5C - Turbo settings Lock + Lock all Turbo settings Enable/Disable; 0: Disable , 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x0B5D - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x0B5E - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x0B5F - Package PL3 Lock + Package PL3 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x0B60 - Package PL4 Lock + Package PL4 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x0B61 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + 10, For all other SKUs the recommended default are 0 +**/ + UINT8 TccActivationOffset; + +/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For SKL Y SKU, the recommended default for this policy is 1: Enabled, + For all other SKUs the recommended default are 0: Disabled. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x0B63 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x0B64 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x0B65 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x0B66 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x0B67 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x0B68 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x0B69 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x0B6A - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x0B6B - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x0B6C - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x0B6D - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x0B6E - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x0B6F - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x0B70 - PL1 Enable value + PL1 Enable value to limit average platform power. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x0B71 - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x0B72 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0B76 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; 2: MWAIT loop; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x0B78 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; 0: Single Range Output; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0B79 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x0B7D - Enable or Disable T states + Enable or Disable T states; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0B80 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0B81 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0B82 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableAllThermalFunctions; + +/** Offset 0x0B83 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x0B84 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0B85 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x0B86 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x0B89 - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x0B8A - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0B8C - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0B8D - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x0B8E - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0B8F - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0B90 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0B91 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0B92 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0B93 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x0B94 - Lock prochot configuration + Lock prochot configuration Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x0B95 - Configuration for boot TDP selection + Deprecated. Move to premem. +**/ + UINT8 DeprecatedConfigTdpLevel; + +/** Offset 0x0B96 - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x0B97 - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0BCF +**/ + UINT8 UnusedUpdSpace29; + +/** Offset 0x0BD0 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0BDC - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0BE0 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x0BE4 - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0BE8 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0BEC - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0C08 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0C0C - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0C10 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; 1: Enable + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0C11 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x0C13 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0C14 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0C15 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0C16 - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver + @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0C1B - Minimum Ring ratio limit override + Minimum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0C1C - Maximum Ring ratio limit override + Maximum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0C1D - Enable or Disable Per Core P State OS control + Enable or Disable Per Core P State OS control. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control + Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; 1: + Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping + Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x0C20 - Enable or Disable EPB override over PECI + Enable or Disable EPB override over PECI. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableEpbPeciOverride; + +/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST + Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableFastMsrHwpReq; + +/** Offset 0x0C22 - Enable Configurable TDP + Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP; + 1: Applies to cTDP + $EN_DIS +**/ + UINT8 ApplyConfigTdp; + +/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration + Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs. + $EN_DIS +**/ + UINT8 VccInDemotionOverride; + +/** Offset 0x0C24 - Customize the VccIn Demotion in ms. + Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be + in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on. + Value 0 will disable VccIn Demotion knob. It's 30ms by silicon default +**/ + UINT32 VccInDemotionMs; + +/** Offset 0x0C28 - ReservedCpuPostMemTest + Reserved for CPU Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedCpuPostMemTest[11]; + +/** Offset 0x0C33 - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x0C34 +**/ + UINT8 SecurityPostMemRsvd[16]; + +/** Offset 0x0C44 - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0C45 - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x0C46 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x0C48 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x0C49 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x0D82 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0DB4 - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0DB5 - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0DB7 - Low Power Mode Enable/Disable config mask + Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds + to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, + LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. [ALIAS_NAME LpmStateEnableMask] +**/ + UINT8 PmcLpmS0ixSubStateEnableMask; + +/** Offset 0x0DB8 - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x0DB9 +**/ + UINT8 UnusedUpdSpace30[1]; + +/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxSnoopLatency[4]; + +/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4]; + +/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Uptp[4]; + +/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Dptp[4]; + +/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 8. +**/ + UINT8 CpuPcieRpGen4Uptp[4]; + +/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 9. +**/ + UINT8 CpuPcieRpGen4Dptp[4]; + +/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable + Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs + $EN_DIS +**/ + UINT8 PmcC10DynamicThresholdAdjustment; + +/** Offset 0x0DFB - FOMS Control Policy + Choose the Foms Control Policy, Default = 0 + 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms +**/ + UINT8 CpuPcieFomsCp[4]; + +/** Offset 0x0DFF +**/ + UINT8 UnusedUpdSpace31; + +/** Offset 0x0E00 - LogoPixelHeight Address + Address of LogoPixelHeight +**/ + UINT32 LogoPixelHeight; + +/** Offset 0x0E04 - LogoPixelWidth Address + Address of LogoPixelWidth +**/ + UINT32 LogoPixelWidth; + +/** Offset 0x0E08 - P2P mode for PCIE RP + Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable. + 0: Disable, 1: Enable +**/ + UINT8 CpuPcieRpPeerToPeerMode[4]; + +/** Offset 0x0E0C - Map port under VMD + Map/UnMap port under VMD + $EN_DIS +**/ + UINT8 VmdPort[31]; + +/** Offset 0x0E2B - VMD Port Device + VMD Root port device number. +**/ + UINT8 VmdPortDev[31]; + +/** Offset 0x0E4A - VMD Port Func + VMD Root port function number. +**/ + UINT8 VmdPortFunc[31]; + +/** Offset 0x0E69 +**/ + UINT8 UnusedUpdSpace32[3]; + +/** Offset 0x0E6C - VMD Variable + VMD Variable Pointer. +**/ + UINT32 VmdVariablePtr; + +/** Offset 0x0E70 - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 TdcTimeWindow1[5]; + +/** Offset 0x0E84 - Temporary CfgBar address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdCfgBarBase; + +/** Offset 0x0E88 - Temporary MemBar1 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar1Base; + +/** Offset 0x0E8C - Temporary MemBar2 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar2Base; + +/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits + Set TSN1 MAC Address High. +**/ + UINT32 PchTsn1MacAddressHigh; + +/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits + Set TSN1 MAC Address Low. +**/ + UINT32 PchTsn1MacAddressLow; + +/** Offset 0x0E98 - FspEventHandler + Optional pointer to the boot loader's implementation of FSP_EVENT_HANDLER. +**/ + UINT32 FspEventHandler; + +/** Offset 0x0E9C - Enable VMD Global Mapping + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdGlobalMapping; + +/** Offset 0x0E9D +**/ + UINT8 UnusedUpdSpace33[3]; + +/** Offset 0x0EA0 +**/ + UINT8 ReservedFspsUpd[8]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0EA8 +**/ + UINT8 UnusedUpdSpace34[6]; + +/** Offset 0x0EAE +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/models/galp5/FSP/Include/FsptUpd.h b/models/galp5/FSP/Include/FsptUpd.h new file mode 100644 index 0000000..593ecf4 --- /dev/null +++ b/models/galp5/FSP/Include/FsptUpd.h @@ -0,0 +1,311 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include + +#pragma pack(1) + + +/** Fsp T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionSize; + +/** Offset 0x0030 +**/ + UINT8 Reserved[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - PcdSerialIoUartDebugEnable + Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIoUartDebugEnable; + +/** Offset 0x0041 - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0042 - PcdSerialIoUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIoUartMode; + +/** Offset 0x0043 +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIoUartBaudRate; + +/** Offset 0x0048 - Pci Express Base Address + Base address to be programmed for Pci Express +**/ + UINT64 PcdPciExpressBaseAddress; + +/** Offset 0x0050 - Pci Express Region Length + Region Length to be programmed for Pci Express +**/ + UINT32 PcdPciExpressRegionLength; + +/** Offset 0x0054 - PcdSerialIoUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIoUartParity; + +/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIoUartDataBits; + +/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIoUartStopBits; + +/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIoUartAutoFlow; + +/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartRxPinMux; + +/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartTxPinMux; + +/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIoUartRtsPinMux; + +/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIoUartCtsPinMux; + +/** Offset 0x0068 - PcdSerialIoUartDebugMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIoUartDebugMmioBase; + +/** Offset 0x006C - PcdLpcUartDebugEnable + Enable to initialize LPC Uart device in FSP. + 0:Disable, 1:Enable +**/ + UINT8 PcdLpcUartDebugEnable; + +/** Offset 0x006D - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x006E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x006F - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0070 - PcdSerialIo2ndUartEnable + Enable Additional SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIo2ndUartEnable; + +/** Offset 0x0071 - PcdSerialIo2ndUartNumber + Select SerialIo Uart Controller Number + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIo2ndUartNumber; + +/** Offset 0x0072 - PcdSerialIo2ndUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIo2ndUartMode; + +/** Offset 0x0073 +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x0074 - PcdSerialIo2ndUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIo2ndUartBaudRate; + +/** Offset 0x0078 - PcdSerialIo2ndUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIo2ndUartParity; + +/** Offset 0x0079 - PcdSerialIo2ndUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIo2ndUartDataBits; + +/** Offset 0x007A - PcdSerialIo2ndUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIo2ndUartStopBits; + +/** Offset 0x007B - PcdSerialIo2ndUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIo2ndUartAutoFlow; + +/** Offset 0x007C - PcdSerialIo2ndUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartRxPinMux; + +/** Offset 0x0080 - PcdSerialIo2ndUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartTxPinMux; + +/** Offset 0x0084 - PcdSerialIo2ndUartRtsPinMux - FSPT + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartRtsPinMux; + +/** Offset 0x0088 - PcdSerialIo2ndUartCtsPinMux - FSPT + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartCtsPinMux; + +/** Offset 0x008C - PcdSerialIo2ndUartMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIo2ndUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIo2ndUartMmioBase; + +/** Offset 0x0090 +**/ + UINT32 TopMemoryCacheSize; + +/** Offset 0x0094 - FspDebugHandler + Optional pointer to the boot loader's implementation of FSP_DEBUG_HANDLER. +**/ + UINT32 FspDebugHandler; + +/** Offset 0x0098 +**/ + UINT8 UnusedUpdSpace2[4]; + +/** Offset 0x009C +**/ + UINT8 ReservedFsptUpd1[20]; +} FSP_T_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSP_T_CONFIG FsptConfig; + +/** Offset 0x00B0 +**/ + UINT8 UnusedUpdSpace3[6]; + +/** Offset 0x00B6 +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/models/galp5/FSP/Include/FusaInfoHob.h b/models/galp5/FSP/Include/FusaInfoHob.h new file mode 100644 index 0000000..0d6a953 --- /dev/null +++ b/models/galp5/FSP/Include/FusaInfoHob.h @@ -0,0 +1,161 @@ +/** @file + This file contains definitions required for creation of TGL + end-to-end check-the-checker test result hob. + +@copyright + INTEL CONFIDENTIAL Copyright 2020 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ +#ifndef _FUSA_INFO_HOB_H_ +#define _FUSA_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiFusaInfoGuid; + +/** + FuSa Info HOB version + Use this to compare to the HOB retrieved from the FSP for the + exact match +**/ +#define FUSA_INFO_VERSION 0x00000100 + +/** Constants used for FUSA_TEST_RESULT->CheckResults[] and + * FUSA_TEST_RESULT->TestResult */ +/**@defgroup ResultConstant Check Result Constants*/ +/**@{*/ +#define FUSA_TEST_DEVICE_NOTAVAILABLE 0xFF /**TestNumber will have this value. + + @note While the core4-7 (cbo4-7) that are strictly related to + the TGL-H are listed, there are not within the + implementation scope and validation scope yet. +**/ +typedef enum +{ + FusaTestNumMc0Cmi = 0, /// + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __GPIOCONFIG_H__ +#define __GPIOCONFIG_H__ +#include +#include +#include + +/* + SKL LP GPIO pins + Use below for functions from PCH GPIO Lib which + require GpioPad as argument. Encoding used here + has all information required by library functions +*/ +#define GPIO_SKL_LP_GPP_A0 0x02000000 +#define GPIO_SKL_LP_GPP_A1 0x02000001 +#define GPIO_SKL_LP_GPP_A2 0x02000002 +#define GPIO_SKL_LP_GPP_A3 0x02000003 +#define GPIO_SKL_LP_GPP_A4 0x02000004 +#define GPIO_SKL_LP_GPP_A5 0x02000005 +#define GPIO_SKL_LP_GPP_A6 0x02000006 +#define GPIO_SKL_LP_GPP_A7 0x02000007 +#define GPIO_SKL_LP_GPP_A8 0x02000008 +#define GPIO_SKL_LP_GPP_A9 0x02000009 +#define GPIO_SKL_LP_GPP_A10 0x0200000A +#define GPIO_SKL_LP_GPP_A11 0x0200000B +#define GPIO_SKL_LP_GPP_A12 0x0200000C +#define GPIO_SKL_LP_GPP_A13 0x0200000D +#define GPIO_SKL_LP_GPP_A14 0x0200000E +#define GPIO_SKL_LP_GPP_A15 0x0200000F +#define GPIO_SKL_LP_GPP_A16 0x02000010 +#define GPIO_SKL_LP_GPP_A17 0x02000011 +#define GPIO_SKL_LP_GPP_A18 0x02000012 +#define GPIO_SKL_LP_GPP_A19 0x02000013 +#define GPIO_SKL_LP_GPP_A20 0x02000014 +#define GPIO_SKL_LP_GPP_A21 0x02000015 +#define GPIO_SKL_LP_GPP_A22 0x02000016 +#define GPIO_SKL_LP_GPP_A23 0x02000017 +#define GPIO_SKL_LP_GPP_B0 0x02010000 +#define GPIO_SKL_LP_GPP_B1 0x02010001 +#define GPIO_SKL_LP_GPP_B2 0x02010002 +#define GPIO_SKL_LP_GPP_B3 0x02010003 +#define GPIO_SKL_LP_GPP_B4 0x02010004 +#define GPIO_SKL_LP_GPP_B5 0x02010005 +#define GPIO_SKL_LP_GPP_B6 0x02010006 +#define GPIO_SKL_LP_GPP_B7 0x02010007 +#define GPIO_SKL_LP_GPP_B8 0x02010008 +#define GPIO_SKL_LP_GPP_B9 0x02010009 +#define GPIO_SKL_LP_GPP_B10 0x0201000A +#define GPIO_SKL_LP_GPP_B11 0x0201000B +#define GPIO_SKL_LP_GPP_B12 0x0201000C +#define GPIO_SKL_LP_GPP_B13 0x0201000D +#define GPIO_SKL_LP_GPP_B14 0x0201000E +#define GPIO_SKL_LP_GPP_B15 0x0201000F +#define GPIO_SKL_LP_GPP_B16 0x02010010 +#define GPIO_SKL_LP_GPP_B17 0x02010011 +#define GPIO_SKL_LP_GPP_B18 0x02010012 +#define GPIO_SKL_LP_GPP_B19 0x02010013 +#define GPIO_SKL_LP_GPP_B20 0x02010014 +#define GPIO_SKL_LP_GPP_B21 0x02010015 +#define GPIO_SKL_LP_GPP_B22 0x02010016 +#define GPIO_SKL_LP_GPP_B23 0x02010017 +#define GPIO_SKL_LP_GPP_C0 0x02020000 +#define GPIO_SKL_LP_GPP_C1 0x02020001 +#define GPIO_SKL_LP_GPP_C2 0x02020002 +#define GPIO_SKL_LP_GPP_C3 0x02020003 +#define GPIO_SKL_LP_GPP_C4 0x02020004 +#define GPIO_SKL_LP_GPP_C5 0x02020005 +#define GPIO_SKL_LP_GPP_C6 0x02020006 +#define GPIO_SKL_LP_GPP_C7 0x02020007 +#define GPIO_SKL_LP_GPP_C8 0x02020008 +#define GPIO_SKL_LP_GPP_C9 0x02020009 +#define GPIO_SKL_LP_GPP_C10 0x0202000A +#define GPIO_SKL_LP_GPP_C11 0x0202000B +#define GPIO_SKL_LP_GPP_C12 0x0202000C +#define GPIO_SKL_LP_GPP_C13 0x0202000D +#define GPIO_SKL_LP_GPP_C14 0x0202000E +#define GPIO_SKL_LP_GPP_C15 0x0202000F +#define GPIO_SKL_LP_GPP_C16 0x02020010 +#define GPIO_SKL_LP_GPP_C17 0x02020011 +#define GPIO_SKL_LP_GPP_C18 0x02020012 +#define GPIO_SKL_LP_GPP_C19 0x02020013 +#define GPIO_SKL_LP_GPP_C20 0x02020014 +#define GPIO_SKL_LP_GPP_C21 0x02020015 +#define GPIO_SKL_LP_GPP_C22 0x02020016 +#define GPIO_SKL_LP_GPP_C23 0x02020017 +#define GPIO_SKL_LP_GPP_D0 0x02030000 +#define GPIO_SKL_LP_GPP_D1 0x02030001 +#define GPIO_SKL_LP_GPP_D2 0x02030002 +#define GPIO_SKL_LP_GPP_D3 0x02030003 +#define GPIO_SKL_LP_GPP_D4 0x02030004 +#define GPIO_SKL_LP_GPP_D5 0x02030005 +#define GPIO_SKL_LP_GPP_D6 0x02030006 +#define GPIO_SKL_LP_GPP_D7 0x02030007 +#define GPIO_SKL_LP_GPP_D8 0x02030008 +#define GPIO_SKL_LP_GPP_D9 0x02030009 +#define GPIO_SKL_LP_GPP_D10 0x0203000A +#define GPIO_SKL_LP_GPP_D11 0x0203000B +#define GPIO_SKL_LP_GPP_D12 0x0203000C +#define GPIO_SKL_LP_GPP_D13 0x0203000D +#define GPIO_SKL_LP_GPP_D14 0x0203000E +#define GPIO_SKL_LP_GPP_D15 0x0203000F +#define GPIO_SKL_LP_GPP_D16 0x02030010 +#define GPIO_SKL_LP_GPP_D17 0x02030011 +#define GPIO_SKL_LP_GPP_D18 0x02030012 +#define GPIO_SKL_LP_GPP_D19 0x02030013 +#define GPIO_SKL_LP_GPP_D20 0x02030014 +#define GPIO_SKL_LP_GPP_D21 0x02030015 +#define GPIO_SKL_LP_GPP_D22 0x02030016 +#define GPIO_SKL_LP_GPP_D23 0x02030017 +#define GPIO_SKL_LP_GPP_E0 0x02040000 +#define GPIO_SKL_LP_GPP_E1 0x02040001 +#define GPIO_SKL_LP_GPP_E2 0x02040002 +#define GPIO_SKL_LP_GPP_E3 0x02040003 +#define GPIO_SKL_LP_GPP_E4 0x02040004 +#define GPIO_SKL_LP_GPP_E5 0x02040005 +#define GPIO_SKL_LP_GPP_E6 0x02040006 +#define GPIO_SKL_LP_GPP_E7 0x02040007 +#define GPIO_SKL_LP_GPP_E8 0x02040008 +#define GPIO_SKL_LP_GPP_E9 0x02040009 +#define GPIO_SKL_LP_GPP_E10 0x0204000A +#define GPIO_SKL_LP_GPP_E11 0x0204000B +#define GPIO_SKL_LP_GPP_E12 0x0204000C +#define GPIO_SKL_LP_GPP_E13 0x0204000D +#define GPIO_SKL_LP_GPP_E14 0x0204000E +#define GPIO_SKL_LP_GPP_E15 0x0204000F +#define GPIO_SKL_LP_GPP_E16 0x02040010 +#define GPIO_SKL_LP_GPP_E17 0x02040011 +#define GPIO_SKL_LP_GPP_E18 0x02040012 +#define GPIO_SKL_LP_GPP_E19 0x02040013 +#define GPIO_SKL_LP_GPP_E20 0x02040014 +#define GPIO_SKL_LP_GPP_E21 0x02040015 +#define GPIO_SKL_LP_GPP_E22 0x02040016 +#define GPIO_SKL_LP_GPP_E23 0x02040017 +#define GPIO_SKL_LP_GPP_F0 0x02050000 +#define GPIO_SKL_LP_GPP_F1 0x02050001 +#define GPIO_SKL_LP_GPP_F2 0x02050002 +#define GPIO_SKL_LP_GPP_F3 0x02050003 +#define GPIO_SKL_LP_GPP_F4 0x02050004 +#define GPIO_SKL_LP_GPP_F5 0x02050005 +#define GPIO_SKL_LP_GPP_F6 0x02050006 +#define GPIO_SKL_LP_GPP_F7 0x02050007 +#define GPIO_SKL_LP_GPP_F8 0x02050008 +#define GPIO_SKL_LP_GPP_F9 0x02050009 +#define GPIO_SKL_LP_GPP_F10 0x0205000A +#define GPIO_SKL_LP_GPP_F11 0x0205000B +#define GPIO_SKL_LP_GPP_F12 0x0205000C +#define GPIO_SKL_LP_GPP_F13 0x0205000D +#define GPIO_SKL_LP_GPP_F14 0x0205000E +#define GPIO_SKL_LP_GPP_F15 0x0205000F +#define GPIO_SKL_LP_GPP_F16 0x02050010 +#define GPIO_SKL_LP_GPP_F17 0x02050011 +#define GPIO_SKL_LP_GPP_F18 0x02050012 +#define GPIO_SKL_LP_GPP_F19 0x02050013 +#define GPIO_SKL_LP_GPP_F20 0x02050014 +#define GPIO_SKL_LP_GPP_F21 0x02050015 +#define GPIO_SKL_LP_GPP_F22 0x02050016 +#define GPIO_SKL_LP_GPP_F23 0x02050017 +#define GPIO_SKL_LP_GPP_G0 0x02060000 +#define GPIO_SKL_LP_GPP_G1 0x02060001 +#define GPIO_SKL_LP_GPP_G2 0x02060002 +#define GPIO_SKL_LP_GPP_G3 0x02060003 +#define GPIO_SKL_LP_GPP_G4 0x02060004 +#define GPIO_SKL_LP_GPP_G5 0x02060005 +#define GPIO_SKL_LP_GPP_G6 0x02060006 +#define GPIO_SKL_LP_GPP_G7 0x02060007 +#define GPIO_SKL_LP_GPD0 0x02070000 +#define GPIO_SKL_LP_GPD1 0x02070001 +#define GPIO_SKL_LP_GPD2 0x02070002 +#define GPIO_SKL_LP_GPD3 0x02070003 +#define GPIO_SKL_LP_GPD4 0x02070004 +#define GPIO_SKL_LP_GPD5 0x02070005 +#define GPIO_SKL_LP_GPD6 0x02070006 +#define GPIO_SKL_LP_GPD7 0x02070007 +#define GPIO_SKL_LP_GPD8 0x02070008 +#define GPIO_SKL_LP_GPD9 0x02070009 +#define GPIO_SKL_LP_GPD10 0x0207000A +#define GPIO_SKL_LP_GPD11 0x0207000B + +#define END_OF_GPIO_TABLE 0xFFFFFFFF + +//Sample GPIO Table + +static GPIO_INIT_CONFIG mGpioTableLpDdr3Rvp3[] = +{ +//skip for eSPI function {GPIO_SKL_LP_GPP_A0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//H_RCIN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD0_ESPI_IO0 +//skip for eSPI function {GPIO_SKL_LP_GPP_A2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD1_ESPI_IO1 +//skip for eSPI function {GPIO_SKL_LP_GPP_A3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD2_ESPI_IO2 +//skip for eSPI function {GPIO_SKL_LP_GPP_A4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD3_ESPI_IO3 +//skip for eSPI function {GPIO_SKL_LP_GPP_A5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//LPC_FRAME_ESPI_CS_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//INT_SERIRQ +//skip for eSPI function {GPIO_SKL_LP_GPP_A7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SLP_S0ix_R_N + {GPIO_SKL_LP_GPP_A8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_CLKRUN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_CLK_ESPI_CLK + {GPIO_SKL_LP_GPP_A10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//PCH_CLK_PCI_TPM + {GPIO_SKL_LP_GPP_A11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//EC_HID_INTR + {GPIO_SKL_LP_GPP_A12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//M.2_WWAN_GNSS_UART_RST_N + {GPIO_SKL_LP_GPP_A13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SUS_PWR_ACK_R +//skip for eSPI function {GPIO_SKL_LP_GPP_A14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SUS_STAT_ESPI_RST_N + {GPIO_SKL_LP_GPP_A15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SUSACK_R_N + {GPIO_SKL_LP_GPP_A16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_1P8_SEL + {GPIO_SKL_LP_GPP_A17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_PWR_EN_N + {GPIO_SKL_LP_GPP_A18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_0_SENSOR + {GPIO_SKL_LP_GPP_A19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_1_SENSOR + {GPIO_SKL_LP_GPP_A20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_2_SENSOR + {GPIO_SKL_LP_GPP_A21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GNSS_CHUB_IRQ + {GPIO_SKL_LP_GPP_A22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_SLP_N + {GPIO_SKL_LP_GPP_A23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//FPS_DRDY + {GPIO_SKL_LP_GPP_B0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID0 + {GPIO_SKL_LP_GPP_B1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID1 + {GPIO_SKL_LP_GPP_B2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GP_VRALERTB + {GPIO_SKL_LP_GPP_B3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioPlatformReset, GpioTermNone}},//TCH_PAD_INTR_R_N + {GPIO_SKL_LP_GPP_B4, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//BT_RF_KILL_N + {GPIO_SKL_LP_GPP_B5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_BT_UART_WAKE_N + // {GPIO_SKL_LP_GPP_B6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT1_N + // {GPIO_SKL_LP_GPP_B7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT2_LAN_N + // {GPIO_SKL_LP_GPP_B8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_SSD_SLOT3_N + // {GPIO_SKL_LP_GPP_B9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WIGIG_N + // {GPIO_SKL_LP_GPP_B10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WLAN_N + {GPIO_SKL_LP_GPP_B11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//MPHY_EXT_PWR_GATEB + {GPIO_SKL_LP_GPP_B12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SLP_S0_N + {GPIO_SKL_LP_GPP_B13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PLT_RST_N + {GPIO_SKL_LP_GPP_B14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_PWREN + {GPIO_SKL_LP_GPP_B15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_DFU + {GPIO_SKL_LP_GPP_B16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//M.2_WLAN_WIFI_WAKE_N + {GPIO_SKL_LP_GPP_B17, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSci, GpioHostDeepReset, GpioTermWpd20K}},//TBT_CIO_PLUG_EVENT_N + {GPIO_SKL_LP_GPP_B18, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermWpu20K}},//PCH_SLOT1_WAKE_N + {GPIO_SKL_LP_GPP_B19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_GSPI1_CS_R1_N + {GPIO_SKL_LP_GPP_B20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_CLK_R1 + {GPIO_SKL_LP_GPP_B21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MISO_R1 + {GPIO_SKL_LP_GPP_B22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MOSI_R1 + {GPIO_SKL_LP_GPP_B23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DISCRETE_GNSS_RESET_N + {GPIO_SKL_LP_GPP_C0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SMB_CLK + {GPIO_SKL_LP_GPP_C1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SMB_DATA + {GPIO_SKL_LP_GPP_C2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SKIN_THRM_SNSR_ALERT_N + {GPIO_SKL_LP_GPP_C3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_CLK + {GPIO_SKL_LP_GPP_C4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_DATA + {GPIO_SKL_LP_GPP_C5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermWpd20K}},//M.2_WIGIG_WAKE_N + {GPIO_SKL_LP_GPP_C6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML1_CLK + {GPIO_SKL_LP_GPP_C7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SML1_DATA + {GPIO_SKL_LP_GPP_C8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RXD + {GPIO_SKL_LP_GPP_C9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_TXD + {GPIO_SKL_LP_GPP_C10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RTS_N + {GPIO_SKL_LP_GPP_C11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_CTS_N + {GPIO_SKL_LP_GPP_C12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RXD + {GPIO_SKL_LP_GPP_C13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_TXD + {GPIO_SKL_LP_GPP_C14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RTS_N + {GPIO_SKL_LP_GPP_C15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_CTS_N + {GPIO_SKL_LP_GPP_C16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SDA + {GPIO_SKL_LP_GPP_C17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SCL + {GPIO_SKL_LP_GPP_C18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SDA + {GPIO_SKL_LP_GPP_C19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SCL + {GPIO_SKL_LP_GPP_C20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RXD + {GPIO_SKL_LP_GPP_C21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_TXD + {GPIO_SKL_LP_GPP_C22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RTS_N + {GPIO_SKL_LP_GPP_C23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_CTS_N + {GPIO_SKL_LP_GPP_D0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CS_N + {GPIO_SKL_LP_GPP_D1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CLK + {GPIO_SKL_LP_GPP_D2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MISO + {GPIO_SKL_LP_GPP_D3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MOSI + {GPIO_SKL_LP_GPP_D4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CSI2_FLASH_STROBE + {GPIO_SKL_LP_GPP_D5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SDA + {GPIO_SKL_LP_GPP_D6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SCL + {GPIO_SKL_LP_GPP_D7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SDA + {GPIO_SKL_LP_GPP_D8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SCL + {GPIO_SKL_LP_GPP_D9, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//HOME_BTN + {GPIO_SKL_LP_GPP_D10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SCREEN_LOCK_PCH + {GPIO_SKL_LP_GPP_D11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_UP_PCH + {GPIO_SKL_LP_GPP_D12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_DOWN_PCH + {GPIO_SKL_LP_GPP_D13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RXD_SML0B_DATA + {GPIO_SKL_LP_GPP_D14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_TXD_SML0B_CLK + {GPIO_SKL_LP_GPP_D15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RTS_N + {GPIO_SKL_LP_GPP_D16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_CTS_SML0B_ALERT_N + {GPIO_SKL_LP_GPP_D17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_1 + {GPIO_SKL_LP_GPP_D18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_1 + {GPIO_SKL_LP_GPP_D19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_0 + {GPIO_SKL_LP_GPP_D20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_0 + {GPIO_SKL_LP_GPP_D21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO2 + {GPIO_SKL_LP_GPP_D22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO3 + {GPIO_SKL_LP_GPP_D23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP_MCLK + {GPIO_SKL_LP_GPP_E0, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//SPI_TPM_HDR_IRQ_N + {GPIO_SKL_LP_GPP_E1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA_ODD_PRSNT_N + {GPIO_SKL_LP_GPP_E2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntLvlEdgDis | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_SSD_SATA2_PCIE3_DET_N + {GPIO_SKL_LP_GPP_E3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioResumeReset, GpioTermNone}},//EINK_SSR_DFU_N + {GPIO_SKL_LP_GPP_E4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_RESET + {GPIO_SKL_LP_GPP_E5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA1_PHYSLP1_DIRECT_R + {GPIO_SKL_LP_GPP_E6, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA2_PHYSLP2_M.2SSD_R + {GPIO_SKL_LP_GPP_E8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SATA_LED_N + {GPIO_SKL_LP_GPP_E9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_0_WP1_OTG_N + {GPIO_SKL_LP_GPP_E10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_1_WP4_N + {GPIO_SKL_LP_GPP_E11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_2_WP2_WP3_WP5_R_N + {GPIO_SKL_LP_GPP_E12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_IRQ + {GPIO_SKL_LP_GPP_E13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_HPD_Q + {GPIO_SKL_LP_GPP_E14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_HPD_Q + {GPIO_SKL_LP_GPP_E15, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSmi, GpioHostDeepReset, GpioTermNone}},//SMC_EXTSMI_R_N + {GPIO_SKL_LP_GPP_E16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//SMC_RUNTIME_SCI_R_N + {GPIO_SKL_LP_GPP_E17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EDP_HPD + {GPIO_SKL_LP_GPP_E18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_CTRL_CLK + {GPIO_SKL_LP_GPP_E19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI1_CTRL_DATA + {GPIO_SKL_LP_GPP_E20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_CTRL_CLK + {GPIO_SKL_LP_GPP_E21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI2_CTRL_DATA + {GPIO_SKL_LP_GPP_E22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_CODEC_IRQ + {GPIO_SKL_LP_GPP_E23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_RST_N + {GPIO_SKL_LP_GPP_F0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SCLK + {GPIO_SKL_LP_GPP_F1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SFRM + {GPIO_SKL_LP_GPP_F2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_TXD + {GPIO_SKL_LP_GPP_F3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_RXD + {GPIO_SKL_LP_GPP_F4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SDA + {GPIO_SKL_LP_GPP_F5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SCL + {GPIO_SKL_LP_GPP_F6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SDA + {GPIO_SKL_LP_GPP_F7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SCL + {GPIO_SKL_LP_GPP_F8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SDA + {GPIO_SKL_LP_GPP_F9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SCL + {GPIO_SKL_LP_GPP_F10, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SDA + {GPIO_SKL_LP_GPP_F11, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SCL + {GPIO_SKL_LP_GPP_F12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CMD + {GPIO_SKL_LP_GPP_F13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA0 + {GPIO_SKL_LP_GPP_F14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA1 + {GPIO_SKL_LP_GPP_F15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA2 + {GPIO_SKL_LP_GPP_F16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA3 + {GPIO_SKL_LP_GPP_F17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA4 + {GPIO_SKL_LP_GPP_F18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA5 + {GPIO_SKL_LP_GPP_F19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA6 + {GPIO_SKL_LP_GPP_F20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA7 + {GPIO_SKL_LP_GPP_F21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_RCLK + {GPIO_SKL_LP_GPP_F22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CLK + {GPIO_SKL_LP_GPP_F23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_M.2_WWAN_UIM_SIM_DET + {GPIO_SKL_LP_GPP_G0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CMD + {GPIO_SKL_LP_GPP_G1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA0 + {GPIO_SKL_LP_GPP_G2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA1 + {GPIO_SKL_LP_GPP_G3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA2 + {GPIO_SKL_LP_GPP_G4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA3 + {GPIO_SKL_LP_GPP_G5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CDB + {GPIO_SKL_LP_GPP_G6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CLK + {GPIO_SKL_LP_GPP_G7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_WP + {GPIO_SKL_LP_GPD0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_BATLOW_R_N + {GPIO_SKL_LP_GPD1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//AC_PRESENT_R + {GPIO_SKL_LP_GPD2, {GpioPadModeNative1, GpioHostOwnAcpi, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioDswReset, GpioTermNone}},//LANWAKE_SMC_WAKE_SCI_N + {GPIO_SKL_LP_GPD3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermWpu20K}},//PM_PWRBTN_R_N + {GPIO_SKL_LP_GPD4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S3_R_N + {GPIO_SKL_LP_GPD5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S4_R_N + {GPIO_SKL_LP_GPD6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_M_R_N + {GPIO_SKL_LP_GPD7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//USB_WAKEOUT_INTRUDET_N + {GPIO_SKL_LP_GPD8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SUS_CLK + {GPIO_SKL_LP_GPD9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PCH_SLP_WLAN_N + {GPIO_SKL_LP_GPD10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S5_R_N + {GPIO_SKL_LP_GPD11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_LANPHY_ENABLE + {END_OF_GPIO_TABLE, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//Marking End of Table +}; + +#endif //_GPIO_CONFIG_H_ diff --git a/models/galp5/FSP/Include/MemInfoHob.h b/models/galp5/FSP/Include/MemInfoHob.h new file mode 100644 index 0000000..4ff8bf9 --- /dev/null +++ b/models/galp5/FSP/Include/MemInfoHob.h @@ -0,0 +1,286 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + + @copyright + Copyright (c) 1999 - 2020, Intel Corporation. All rights reserved.
+ This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License that accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_TRACE_CACHE_TYPE 3 + +#define MAX_NODE 2 +#define MAX_CH 4 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef __MRC_BOOT_MODE__ +#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h + #ifndef INT32_MAX + #define INT32_MAX (0x7FFFFFFF) + #endif //INT32_MAX +typedef enum { + bmCold, ///< Cold boot + bmWarm, ///< Warm boot + bmS3, ///< S3 resume + bmFast, ///< Fast boot + MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. + MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. +} MRC_BOOT_MODE; +#endif //__MRC_BOOT_MODE__ + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#ifndef MRC_DDR_TYPE_WIO2 +#define MRC_DDR_TYPE_WIO2 4 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 5 +#endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz + UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT64 BaseAddress; ///< Trace Base Address + UINT64 TotalSize; ///< Total Trace Region of Same Cache type + UINT8 CacheType; ///< Trace Cache Type + UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code + UINT8 Rsvd[2]; +} PSMI_MEM_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + Revision 1: + - Initial version. + Revision 2: + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT64 PrmrrBase; + UINT32 PramSize; + UINT64 PramBase; + UINT64 DismLimit; + UINT64 DismBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; + PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ diff --git a/models/galp5/FSP/LICENSE b/models/galp5/FSP/LICENSE new file mode 100644 index 0000000..9fddc58 --- /dev/null +++ b/models/galp5/FSP/LICENSE @@ -0,0 +1,46 @@ +************************************************************************ +** ** +** ** +** IMPORTANT - READ THIS BEFORE COPYING, INSTALLING OR USING ** +** ** +** ANY PORTION OF THE SOFTWARE ** +** ** +************************************************************************ + +Copyright (c) 2018 Intel Corporation. +All rights reserved. + +Redistribution. + +Redistribution and use in binary form, without modification, are permitted +provided that the following conditions are met: + +- Redistributions must reproduce the above copyright notice and the +following disclaimer in the documentation and/or other materials provided +with the distribution. + +- Neither the name of Intel Corporation nor the names of its suppliers +may be used to endorse or promote products derived from this software +without specific prior written permission. + +- No reverse engineering, decompilation, or disassembly of this software +is permitted. + +"Binary form" includes any format that is commonly used for electronic +conveyance that is a reversible, bit-exact translation of binary +representation to ASCII or ISO text, for example "uuencode". + +DISCLAIMER. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/models/galp5/IntelGopDriver.efi b/models/galp5/IntelGopDriver.efi new file mode 100644 index 0000000..1d87dee --- /dev/null +++ b/models/galp5/IntelGopDriver.efi @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8f7e52b39dd1f5dc9e36dcce6af0016ca419e957760e5fece5e4f90d167bdc +size 148416 diff --git a/models/galp5/IntelGopDriver.inf b/models/galp5/IntelGopDriver.inf new file mode 100644 index 0000000..39b2eb9 --- /dev/null +++ b/models/galp5/IntelGopDriver.inf @@ -0,0 +1,9 @@ +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = IntelGopDriver + FILE_GUID = 767222f4-a9f4-41ba-9faa-edaa1405a486 + MODULE_TYPE = UEFI_DRIVER + VERSION_STRING = 1.0 + +[Binaries.X64] + PE32|IntelGopDriver.efi|* diff --git a/models/galp5/README.md b/models/galp5/README.md new file mode 100644 index 0000000..52c7f72 --- /dev/null +++ b/models/galp5/README.md @@ -0,0 +1,12 @@ +# System76 Galago Pro (galp5) + +## Contents + +- [EC](./ec.rom) + - *Read Error: No such file or directory (os error 2)* +- [FD](./fd.rom) + - Size: 4 KB + - HAP: false +- [ME](./me.rom) + - Size: 5116 KB + - Version: 15.0.10.1447 diff --git a/models/galp5/README.md.in b/models/galp5/README.md.in new file mode 100644 index 0000000..211e30e --- /dev/null +++ b/models/galp5/README.md.in @@ -0,0 +1 @@ +# System76 Galago Pro (galp5) diff --git a/models/galp5/chip.txt b/models/galp5/chip.txt new file mode 100644 index 0000000..9b1d0de --- /dev/null +++ b/models/galp5/chip.txt @@ -0,0 +1 @@ +GD25Q127C/GD25Q128C diff --git a/models/galp5/coreboot-collector.txt b/models/galp5/coreboot-collector.txt new file mode 100644 index 0000000..0a4f97d --- /dev/null +++ b/models/galp5/coreboot-collector.txt @@ -0,0 +1,257 @@ +## PCI ## +PCI Device: 0000:00:00.0: Class 0x00060000, Vendor 0x8086, Device 0x9A14, Revision 0x01 +PCI Device: 0000:00:02.0: Class 0x00030000, Vendor 0x8086, Device 0x9A49, Revision 0x01 +PCI Device: 0000:00:06.0: Class 0x00060400, Vendor 0x8086, Device 0x9A09, Revision 0x01 +PCI Device: 0000:00:07.0: Class 0x00060400, Vendor 0x8086, Device 0x9A23, Revision 0x01 +PCI Device: 0000:00:0a.0: Class 0x00118000, Vendor 0x8086, Device 0x9A0D, Revision 0x01 +PCI Device: 0000:00:0d.0: Class 0x000C0330, Vendor 0x8086, Device 0x9A13, Revision 0x01 +PCI Device: 0000:00:0d.2: Class 0x000C0340, Vendor 0x8086, Device 0x9A1B, Revision 0x01 +PCI Device: 0000:00:14.0: Class 0x000C0330, Vendor 0x8086, Device 0xA0ED, Revision 0x20 +PCI Device: 0000:00:14.2: Class 0x00050000, Vendor 0x8086, Device 0xA0EF, Revision 0x20 +PCI Device: 0000:00:14.3: Class 0x00028000, Vendor 0x8086, Device 0xA0F0, Revision 0x20 +PCI Device: 0000:00:15.0: Class 0x000C8000, Vendor 0x8086, Device 0xA0E8, Revision 0x20 +PCI Device: 0000:00:15.1: Class 0x000C8000, Vendor 0x8086, Device 0xA0E9, Revision 0x20 +PCI Device: 0000:00:15.2: Class 0x000C8000, Vendor 0x8086, Device 0xA0EA, Revision 0x20 +PCI Device: 0000:00:16.0: Class 0x00078000, Vendor 0x8086, Device 0xA0E0, Revision 0x20 +PCI Device: 0000:00:1c.0: Class 0x00060400, Vendor 0x8086, Device 0xA0BC, Revision 0x20 +PCI Device: 0000:00:1d.0: Class 0x00060400, Vendor 0x8086, Device 0xA0B0, Revision 0x20 +PCI Device: 0000:00:1d.1: Class 0x00060400, Vendor 0x8086, Device 0xA0B1, Revision 0x20 +PCI Device: 0000:00:1f.0: Class 0x00060100, Vendor 0x8086, Device 0xA082, Revision 0x20 +PCI Device: 0000:00:1f.3: Class 0x00040300, Vendor 0x8086, Device 0xA0C8, Revision 0x20 +PCI Device: 0000:00:1f.4: Class 0x000C0500, Vendor 0x8086, Device 0xA0A3, Revision 0x20 +PCI Device: 0000:00:1f.5: Class 0x000C8000, Vendor 0x8086, Device 0xA0A4, Revision 0x20 +PCI Device: 0000:01:00.0: Class 0x00010802, Vendor 0x15B7, Device 0x5009, Revision 0x01 +PCI Device: 0000:2c:00.0: Class 0x00030200, Vendor 0x10DE, Device 0x1F99, Revision 0xA1 +PCI Device: 0000:2d:00.0: Class 0x00FF0000, Vendor 0x10EC, Device 0x522A, Revision 0x01 +PCI Device: 0000:2e:00.0: Class 0x00020000, Vendor 0x10EC, Device 0x8168, Revision 0x15 +## GPIO ## +500 Series PCH-LP +GPP_B0 (0x6E,0x00) 0x44000700 0x0003c018 0x00000100 0x00000000 +GPP_B1 (0x6E,0x02) 0x44000700 0x0003c019 0x00000100 0x00000000 +GPP_B2 (0x6E,0x04) 0x44000102 0x0000301a 0x00000000 0x00000000 +GPP_B3 (0x6E,0x06) 0x80800102 0x0000001b 0x00000000 0x00000000 +GPP_B4 (0x6E,0x08) 0x44000300 0x0000001c 0x00000000 0x00000000 +GPP_B5 (0x6E,0x0A) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_B6 (0x6E,0x0C) 0x44000300 0x0000001e 0x00000000 0x00000000 +GPP_B7 (0x6E,0x0E) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_B8 (0x6E,0x10) 0x44000201 0x00000020 0x00000000 0x00000000 +GPP_B9 (0x6E,0x12) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_B10 (0x6E,0x14) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_B11 (0x6E,0x16) 0x04000702 0x00000023 0x00000000 0x00000000 +GPP_B12 (0x6E,0x18) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_B13 (0x6E,0x1A) 0x44000700 0x0003c025 0x00000000 0x00000000 +GPP_B14 (0x6E,0x1C) 0x44000200 0x0003c026 0x00000000 0x00000000 +GPP_B15 (0x6E,0x1E) 0x44000201 0x00000027 0x00000000 0x00000000 +GPP_B16 (0x6E,0x20) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_B17 (0x6E,0x22) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_B18 (0x6E,0x24) 0x44000300 0x0000002a 0x00000100 0x00000000 +GPP_B19 (0x6E,0x26) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_B20 (0x6E,0x28) 0x44000300 0x0000002c 0x00000000 0x00000000 +GPP_B21 (0x6E,0x2A) 0x44000300 0x0000002d 0x00000000 0x00000000 +GPP_B22 (0x6E,0x2C) 0x44000300 0x0000002e 0x00000000 0x00000000 +GPP_B23 (0x6E,0x2E) 0x44000200 0x0000002f 0x00000000 0x00000000 +GPP_T2 (0x6E,0x38) 0x44000300 0x00000032 0x00000000 0x00000000 +GPP_T3 (0x6E,0x3A) 0x44000300 0x00000033 0x00000000 0x00000000 +GPP_A0 (0x6E,0x54) 0x44000700 0x0003f040 0x00000100 0x00000000 +GPP_A1 (0x6E,0x56) 0x44000702 0x0003f041 0x00000100 0x00000000 +GPP_A2 (0x6E,0x58) 0x44000700 0x0003f042 0x00000100 0x00000000 +GPP_A3 (0x6E,0x5A) 0x44000700 0x0003f043 0x00000100 0x00000000 +GPP_A4 (0x6E,0x5C) 0x44000700 0x0003f044 0x00000100 0x00000000 +GPP_A5 (0x6E,0x5E) 0x44000700 0x0003d045 0x00000100 0x00000000 +GPP_A6 (0x6E,0x60) 0x44000700 0x0003c046 0x00000100 0x00000000 +GPP_A7 (0x6E,0x62) 0x44000300 0x00000047 0x00000000 0x00000000 +GPP_A8 (0x6E,0x64) 0x44000b00 0x0003c048 0x00000100 0x00000000 +GPP_A9 (0x6E,0x66) 0x44000f00 0x0003c049 0x00000100 0x00000000 +GPP_A10 (0x6E,0x68) 0x44000300 0x0000004a 0x00000000 0x00000000 +GPP_A11 (0x6E,0x6A) 0x44000300 0x0000004b 0x00000000 0x00000000 +GPP_A12 (0x6E,0x6C) 0x44000300 0x0000004c 0x00000000 0x00000000 +GPP_A13 (0x6E,0x6E) 0x84000201 0x0000004d 0x00000000 0x00000000 +GPP_A14 (0x6E,0x70) 0x44000300 0x0000004e 0x00000000 0x00000000 +GPP_A15 (0x6E,0x72) 0x44000300 0x0000004f 0x00000000 0x00000000 +GPP_A16 (0x6E,0x74) 0x44000300 0x00000050 0x00000000 0x00000000 +GPP_A17 (0x6E,0x76) 0x44000300 0x00000051 0x00000000 0x00000000 +GPP_A18 (0x6E,0x78) 0x44000700 0x00024052 0x00000000 0x00000000 +GPP_A19 (0x6E,0x7A) 0x44000300 0x00000053 0x00000000 0x00000000 +GPP_A20 (0x6E,0x7C) 0x44000300 0x00000054 0x00000000 0x00000000 +GPP_A21 (0x6E,0x7E) 0x44000300 0x00000055 0x00000000 0x00000000 +GPP_A22 (0x6E,0x80) 0x44000300 0x00000056 0x00000000 0x00000000 +GPP_A23 (0x6E,0x82) 0x84000200 0x00000057 0x00000000 0x00000000 +GPP_S0 (0x6D,0x00) 0x44000300 0x0180006c 0x00000000 0x00000000 +GPP_S1 (0x6D,0x02) 0x44000300 0x0180006d 0x00000000 0x00000000 +GPP_S2 (0x6D,0x04) 0x44000300 0x0180006e 0x00000000 0x00000000 +GPP_S3 (0x6D,0x06) 0x44000300 0x0180006f 0x00000000 0x00000000 +GPP_S4 (0x6D,0x08) 0x44000300 0x01800070 0x00000000 0x00000000 +GPP_S5 (0x6D,0x0A) 0x44000300 0x01800071 0x00000000 0x00000000 +GPP_S6 (0x6D,0x0C) 0x44000300 0x01800072 0x00000000 0x00000000 +GPP_S7 (0x6D,0x0E) 0x44000300 0x01800073 0x00000000 0x00000000 +GPP_H0 (0x6D,0x10) 0x84000201 0x00000074 0x00000000 0x00000000 +GPP_H1 (0x6D,0x12) 0x44000300 0x00000075 0x00000000 0x00000000 +GPP_H2 (0x6D,0x14) 0x44000300 0x00000076 0x00000000 0x00000000 +GPP_H3 (0x6D,0x16) 0x44000100 0x00001077 0x00000000 0x00000000 +GPP_H4 (0x6D,0x18) 0x44000702 0x00000018 0x00000000 0x00000000 +GPP_H5 (0x6D,0x1A) 0x44000702 0x00000019 0x00000000 0x00000000 +GPP_H6 (0x6D,0x1C) 0x44000300 0x0000001a 0x00000000 0x00000000 +GPP_H7 (0x6D,0x1E) 0x44000300 0x0000001b 0x00000000 0x00000000 +GPP_H8 (0x6D,0x20) 0x44000100 0x0000101c 0x00000000 0x00000000 +GPP_H9 (0x6D,0x22) 0x44000100 0x0000101d 0x00000000 0x00000000 +GPP_H10 (0x6D,0x24) 0x44000700 0x0000001e 0x00000000 0x00000000 +GPP_H11 (0x6D,0x26) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_H12 (0x6D,0x28) 0x44000300 0x00000020 0x00000000 0x00000000 +GPP_H13 (0x6D,0x2A) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_H14 (0x6D,0x2C) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_H15 (0x6D,0x2E) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_H16 (0x6D,0x30) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_H17 (0x6D,0x32) 0x44000602 0x0003c025 0x00000000 0x00000000 +GPP_H18 (0x6D,0x34) 0x44000700 0x0003c026 0x00000000 0x00000000 +GPP_H19 (0x6D,0x36) 0x44000300 0x0003c027 0x00000000 0x00000000 +GPP_H20 (0x6D,0x38) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_H21 (0x6D,0x3A) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_H22 (0x6D,0x3C) 0x44000300 0x0000002a 0x00000000 0x00000000 +GPP_H23 (0x6D,0x3E) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_D0 (0x6D,0x40) 0x44000102 0x0000002c 0x00000000 0x00000000 +GPP_D1 (0x6D,0x42) 0x84000201 0x0000002d 0x00000100 0x00000000 +GPP_D2 (0x6D,0x44) 0x84000100 0x0000002e 0x00000000 0x00000000 +GPP_D3 (0x6D,0x46) 0x84000102 0x0000002f 0x00000000 0x00000000 +GPP_D4 (0x6D,0x48) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_D5 (0x6D,0x4A) 0x44000700 0x00000031 0x00000000 0x00000000 +GPP_D6 (0x6D,0x4C) 0x44000702 0x00000032 0x00000000 0x00000000 +GPP_D7 (0x6D,0x4E) 0x44000700 0x00000033 0x00000000 0x00000000 +GPP_D8 (0x6D,0x50) 0x44000700 0x00000034 0x00000000 0x00000000 +GPP_D9 (0x6D,0x52) 0x44000300 0x00000035 0x00000000 0x00000000 +GPP_D10 (0x6D,0x54) 0x44000300 0x00000036 0x00000000 0x00000000 +GPP_D11 (0x6D,0x56) 0x44000102 0x00001037 0x00000000 0x00000000 +GPP_D12 (0x6D,0x58) 0x44000100 0x00001038 0x00000000 0x00000000 +GPP_D13 (0x6D,0x5A) 0x44000200 0x00000039 0x00000000 0x00000000 +GPP_D14 (0x6D,0x5C) 0x84000201 0x0000003a 0x00000000 0x00000000 +GPP_D15 (0x6D,0x5E) 0x44000300 0x0000003b 0x00000000 0x00000000 +GPP_D16 (0x6D,0x60) 0x44000300 0x0000003c 0x00000000 0x00000000 +GPP_D17 (0x6D,0x62) 0x44000102 0x0000103d 0x00000000 0x00000000 +GPP_D18 (0x6D,0x64) 0x44000100 0x0000103e 0x00000000 0x00000000 +GPP_D19 (0x6D,0x66) 0x44000300 0x0000003f 0x00000000 0x00000000 +GPP_U4 (0x6D,0x72) 0x84000201 0x00000044 0x00000000 0x00000000 +GPP_U5 (0x6D,0x74) 0x84000201 0x00000045 0x00000000 0x00000000 +GPD0 (0x6C,0x00) 0x04000702 0x00003060 0x00000000 0x00000000 +GPD1 (0x6C,0x02) 0x04000702 0x00003c61 0x00000000 0x00000000 +GPD2 (0x6C,0x04) 0x04000102 0x00000062 0x00000000 0x00000000 +GPD3 (0x6C,0x06) 0x04000702 0x00003063 0x00000010 0x00000000 +GPD4 (0x6C,0x08) 0x04000600 0x00000064 0x00000000 0x00000000 +GPD5 (0x6C,0x0A) 0x04000600 0x00000065 0x00000000 0x00000000 +GPD6 (0x6C,0x0C) 0x44000700 0x00000066 0x00000000 0x00000000 +GPD7 (0x6C,0x0E) 0x04000201 0x00000067 0x00000000 0x00000000 +GPD8 (0x6C,0x10) 0x04000700 0x00000068 0x00000000 0x00000000 +GPD9 (0x6C,0x12) 0x04000200 0x00000069 0x00000000 0x00000000 +GPD10 (0x6C,0x14) 0x44000500 0x0000306a 0x00000000 0x00000000 +GPD11 (0x6C,0x16) 0x44000102 0x0000306b 0x00000000 0x00000000 +GPP_C0 (0x6A,0x00) 0x44000702 0x0003c06e 0x00000000 0x00000000 +GPP_C1 (0x6A,0x02) 0x44000702 0x0003c06f 0x00000000 0x00000000 +GPP_C2 (0x6A,0x04) 0x44000300 0x00000070 0x00000100 0x00000000 +GPP_C3 (0x6A,0x06) 0x44000702 0x00000071 0x00000000 0x00000000 +GPP_C4 (0x6A,0x08) 0x44000702 0x00000072 0x00000000 0x00000000 +GPP_C5 (0x6A,0x0A) 0x44000300 0x00000073 0x00000000 0x00000000 +GPP_C6 (0x6A,0x0C) 0x04000702 0x00000074 0x00000000 0x00000000 +GPP_C7 (0x6A,0x0E) 0x04000702 0x00000075 0x00000000 0x00000000 +GPP_C8 (0x6A,0x10) 0x44000300 0x00000076 0x00000000 0x00000000 +GPP_C9 (0x6A,0x12) 0x44000300 0x00000077 0x00000000 0x00000000 +GPP_C10 (0x6A,0x14) 0x44000300 0x00000018 0x00000000 0x00000000 +GPP_C11 (0x6A,0x16) 0x44000300 0x00000019 0x00000000 0x00000000 +GPP_C12 (0x6A,0x18) 0x44000300 0x0000001a 0x00000000 0x00000000 +GPP_C13 (0x6A,0x1A) 0x44000300 0x0000001b 0x00000000 0x00000000 +GPP_C14 (0x6A,0x1C) 0x40100102 0x0000301c 0x00000000 0x00000000 +GPP_C15 (0x6A,0x1E) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_C16 (0x6A,0x20) 0x44000702 0x0000001e 0x00000000 0x00000000 +GPP_C17 (0x6A,0x22) 0x44000702 0x0000001f 0x00000000 0x00000000 +GPP_C18 (0x6A,0x24) 0x44000702 0x00000020 0x00000000 0x00000000 +GPP_C19 (0x6A,0x26) 0x44000702 0x00000021 0x00000000 0x00000000 +GPP_C20 (0x6A,0x28) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_C21 (0x6A,0x2A) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_C22 (0x6A,0x2C) 0x84000201 0x00000024 0x00000000 0x00000000 +GPP_C23 (0x6A,0x2E) 0x40880102 0x00000025 0x00000000 0x00000000 +GPP_F0 (0x6A,0x30) 0x44000700 0x0003c056 0x00000100 0x00000000 +GPP_F1 (0x6A,0x32) 0x44000702 0x0003f057 0x00000100 0x00000000 +GPP_F2 (0x6A,0x34) 0x44000700 0x0003c058 0x00000100 0x00000000 +GPP_F3 (0x6A,0x36) 0x44000702 0x0003f059 0x00000100 0x00000000 +GPP_F4 (0x6A,0x38) 0x44000300 0x0000005a 0x00000100 0x00000000 +GPP_F5 (0x6A,0x3A) 0x44000300 0x0000005b 0x00000100 0x00000000 +GPP_F6 (0x6A,0x3C) 0x44000300 0x0000005c 0x00000100 0x00000000 +GPP_F7 (0x6A,0x3E) 0x44000201 0x0000005d 0x00000000 0x00000000 +GPP_F8 (0x6A,0x40) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_F9 (0x6A,0x42) 0x44000201 0x0000005f 0x00000000 0x00000000 +GPP_F10 (0x6A,0x44) 0x44000300 0x00000060 0x00000000 0x00000000 +GPP_F11 (0x6A,0x46) 0x44000300 0x00000061 0x00000000 0x00000000 +GPP_F12 (0x6A,0x48) 0x44000300 0x00000062 0x00000000 0x00000000 +GPP_F13 (0x6A,0x4A) 0x44000300 0x00000063 0x00000000 0x00000000 +GPP_F14 (0x6A,0x4C) 0x44000300 0x00000064 0x00000000 0x00000000 +GPP_F15 (0x6A,0x4E) 0x44000300 0x00000065 0x00000000 0x00000000 +GPP_F16 (0x6A,0x50) 0x44000300 0x00000066 0x00000000 0x00000000 +GPP_F17 (0x6A,0x52) 0x84000102 0x00000067 0x00000000 0x00000000 +GPP_F18 (0x6A,0x54) 0x44000300 0x00000068 0x00000000 0x00000000 +GPP_F19 (0x6A,0x56) 0x44000300 0x00000069 0x00000000 0x00000000 +GPP_F20 (0x6A,0x58) 0x44000300 0x0003c06a 0x00000000 0x00000000 +GPP_F21 (0x6A,0x5A) 0x44000100 0x0003d06b 0x00000000 0x00000000 +GPP_F22 (0x6A,0x5C) 0x44000300 0x0003c06c 0x00000000 0x00000000 +GPP_F23 (0x6A,0x5E) 0x44000300 0x0003c06d 0x00000000 0x00000000 +GPP_E0 (0x6A,0x6E) 0x44000300 0x00000026 0x00000000 0x00000000 +GPP_E1 (0x6A,0x70) 0x84000200 0x00000027 0x00000000 0x00000000 +GPP_E2 (0x6A,0x72) 0x40880102 0x00000028 0x00000000 0x00000000 +GPP_E3 (0x6A,0x74) 0x44000102 0x00001029 0x00000000 0x00000000 +GPP_E4 (0x6A,0x76) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_E5 (0x6A,0x78) 0x44000300 0x00000031 0x00000000 0x00000000 +GPP_E6 (0x6A,0x7A) 0x44000300 0x00000032 0x00000900 0x00000000 +GPP_E7 (0x6A,0x7C) 0x82840102 0x00000033 0x00000000 0x00000000 +GPP_E8 (0x6A,0x7E) 0x44000300 0x00000034 0x00000000 0x00000000 +GPP_E9 (0x6A,0x80) 0x44000300 0x00000035 0x00000800 0x00000000 +GPP_E10 (0x6A,0x82) 0x44000300 0x00000036 0x00000900 0x00000000 +GPP_E11 (0x6A,0x84) 0x44000300 0x00000037 0x00000900 0x00000000 +GPP_E12 (0x6A,0x86) 0x44000300 0x00000038 0x00000000 0x00000000 +GPP_E13 (0x6A,0x88) 0x44000300 0x00000039 0x00000000 0x00000000 +GPP_E14 (0x6A,0x8A) 0x44000702 0x0002403a 0x00000000 0x00000000 +GPP_E15 (0x6A,0x8C) 0x44000300 0x0000003b 0x00000000 0x00000000 +GPP_E16 (0x6A,0x8E) 0x44000102 0x0000103c 0x00000000 0x00000000 +GPP_E17 (0x6A,0x90) 0x44000300 0x0000003d 0x00000000 0x00000000 +GPP_E18 (0x6A,0x92) 0x44000300 0x00003c3e 0x00000000 0x00000000 +GPP_E19 (0x6A,0x94) 0x44000300 0x00003c3f 0x00000000 0x00000000 +GPP_E20 (0x6A,0x96) 0x44000300 0x00000040 0x00000000 0x00000000 +GPP_E21 (0x6A,0x98) 0x44000300 0x00000041 0x00000000 0x00000000 +GPP_E22 (0x6A,0x9A) 0x44000300 0x00000042 0x00000000 0x00000000 +GPP_E23 (0x6A,0x9C) 0x44000300 0x00000043 0x00000000 0x00000000 +GPP_R0 (0x69,0x00) 0x44000700 0x0003c058 0x00000000 0x00000000 +GPP_R1 (0x69,0x02) 0x44000700 0x0003fc59 0x00000000 0x00000000 +GPP_R2 (0x69,0x04) 0x44000600 0x0003fc5a 0x00000000 0x00000000 +GPP_R3 (0x69,0x06) 0x44000700 0x0003fc5b 0x00000000 0x00000000 +GPP_R4 (0x69,0x08) 0x44000700 0x0003c05c 0x00000000 0x00000000 +GPP_R5 (0x69,0x0A) 0x44000300 0x0000005d 0x00000000 0x00000000 +GPP_R6 (0x69,0x0C) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_R7 (0x69,0x0E) 0x44000300 0x0000005f 0x00000000 0x00000000 +## HDAUDIO ## +hdaudioC0D0 + vendor_name: Realtek + chip_name: ALC293 + vendor_id: 0x10ec0293 + subsystem_id: 0x15584018 + revision_id: 0x100003 + 0x12: 0x90a60130 + 0x13: 0x40000000 + 0x14: 0x90170110 + 0x15: 0x02211020 + 0x16: 0x411111f0 + 0x18: 0x411111f0 + 0x19: 0x411111f0 + 0x1a: 0x411111f0 + 0x1b: 0x411111f0 + 0x1d: 0x41748245 + 0x1e: 0x411111f0 +hdaudioC0D2 + vendor_name: Intel + chip_name: Tigerlake HDMI + vendor_id: 0x80862812 + subsystem_id: 0x80860101 + revision_id: 0x100000 + 0x04: 0x18560010 + 0x06: 0x18560010 + 0x08: 0x18560010 + 0x0a: 0x18560010 + 0x0b: 0x18560010 + 0x0c: 0x18560010 + 0x0d: 0x18560010 + 0x0e: 0x18560010 + 0x0f: 0x18560010 diff --git a/models/galp5/coreboot.config b/models/galp5/coreboot.config new file mode 100644 index 0000000..c0ba344 --- /dev/null +++ b/models/galp5/coreboot.config @@ -0,0 +1,29 @@ +CONFIG_VENDOR_SYSTEM76=y +CONFIG_BOARD_SYSTEM76_GALP5=y +CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Galago Pro" +CONFIG_MAINBOARD_VERSION="galp5" +CONFIG_ADD_FSP_BINARIES=y +CONFIG_CCACHE=y +CONFIG_CONSOLE_SERIAL=n +CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS=y +CONFIG_CPU_UCODE_BINARIES="$(FIRMWARE_OPEN_MODEL_DIR)/microcode.rom" +CONFIG_FSP_M_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_M.fd" +CONFIG_FSP_S_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_S.fd" +CONFIG_FSP_HEADER_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Include" +CONFIG_HAVE_IFD_BIN=y +CONFIG_HAVE_ME_BIN=y +CONFIG_IFD_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/fd.rom" +CONFIG_INTEL_GMA_VBT_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/vbt.rom" +CONFIG_ME_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/me.rom" +CONFIG_PAYLOAD_ELF=y +CONFIG_PAYLOAD_FILE="$(FIRMWARE_OPEN_UEFIPAYLOAD)" +CONFIG_PCIEXP_HOTPLUG_MEM=0x2000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x20000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G=y +CONFIG_POST_IO=n +CONFIG_RUN_FSP_GOP=y +CONFIG_SMMSTORE=y +CONFIG_SUBSYSTEM_DEVICE_ID=0x4018 +CONFIG_SUBSYSTEM_VENDOR_ID=0x1558 +CONFIG_VALIDATE_INTEL_DESCRIPTOR=y +#CONFIG_CONSOLE_SYSTEM76_EC=y diff --git a/models/galp5/ec.config b/models/galp5/ec.config new file mode 100644 index 0000000..89c806f --- /dev/null +++ b/models/galp5/ec.config @@ -0,0 +1 @@ +BOARD=system76/galp5 diff --git a/models/galp5/ecspy.txt b/models/galp5/ecspy.txt new file mode 100644 index 0000000..46e8ef1 --- /dev/null +++ b/models/galp5/ecspy.txt @@ -0,0 +1,81 @@ +id 5570 rev 2 +A0: data 0 mirror 0 pot 0 control 40 +A1: data 0 mirror 0 pot 0 control 00 +A2: data 1 mirror 0 pot 0 control 00 +A3: data 1 mirror 1 pot 0 control 44 +A4: data 0 mirror 1 pot 0 control 00 +A5: data 1 mirror 1 pot 0 control 80 +A6: data 1 mirror 1 pot 0 control 44 +A7: data 1 mirror 1 pot 0 control 80 +B0: data 0 mirror 0 pot 0 control 84 +B1: data 1 mirror 1 pot 0 control 84 +B2: data 1 mirror 1 pot 0 control 84 +B3: data 1 mirror 1 pot 0 control 80 +B4: data 1 mirror 1 pot 0 control 40 +B5: data 1 mirror 1 pot 0 control 44 +B6: data 1 mirror 1 pot 0 control 44 +B7: data 1 mirror 1 pot 0 control 80 +C0: data 1 mirror 1 pot 0 control 80 +C1: data 1 mirror 1 pot 0 control 04 +C2: data 1 mirror 1 pot 0 control 04 +C3: data 0 mirror 0 pot 0 control 80 +C4: data 0 mirror 0 pot 0 control 84 +C5: data 1 mirror 1 pot 0 control 44 +C6: data 1 mirror 1 pot 0 control 40 +C7: data 0 mirror 0 pot 0 control 44 +D0: data 1 mirror 1 pot 0 control 44 +D1: data 1 mirror 1 pot 0 control 44 +D2: data 1 mirror 1 pot 0 control 00 +D3: data 1 mirror 1 pot 0 control 82 +D4: data 1 mirror 1 pot 0 control 40 +D5: data 1 mirror 1 pot 0 control 44 +D6: data 1 mirror 1 pot 0 control 02 +D7: data 0 mirror 0 pot 0 control 02 +E0: data 1 mirror 1 pot 0 control 04 +E1: data 1 mirror 1 pot 0 control 44 +E2: data 0 mirror 0 pot 0 control 84 +E3: data 0 mirror 0 pot 0 control 44 +E4: data 1 mirror 1 pot 0 control 42 +E5: data 1 mirror 1 pot 0 control 40 +E6: data 1 mirror 1 pot 0 control 80 +E7: data 1 mirror 1 pot 0 control 04 +F0: data 0 mirror 0 pot 0 control 44 +F1: data 1 mirror 1 pot 0 control 44 +F2: data 1 mirror 1 pot 0 control 44 +F3: data 0 mirror 0 pot 0 control 06 +F4: data 1 mirror 1 pot 0 control 04 +F5: data 1 mirror 1 pot 0 control 04 +F6: data 1 mirror 1 pot 0 control 00 +F7: data 0 mirror 0 pot 0 control 44 +G0: data 1 mirror 1 pot 0 control 80 +G1: data 1 mirror 1 pot 0 control 44 +G2: data 0 mirror 0 pot 0 control 40 +G3: data 0 mirror 0 pot 0 control 00 +G4: data 0 mirror 0 pot 0 control 00 +G5: data 0 mirror 0 pot 0 control 00 +G6: data 0 mirror 0 pot 0 control 44 +G7: data 0 mirror 0 pot 0 control 00 +H0: data 1 mirror 1 pot 0 control 80 +H1: data 1 mirror 1 pot 0 control 80 +H2: data 1 mirror 1 pot 0 control 44 +H3: data 1 mirror 1 pot 0 control 80 +H4: data 1 mirror 1 pot 0 control 80 +H5: data 1 mirror 1 pot 0 control 44 +H6: data 1 mirror 1 pot 0 control 80 +H7: data 1 mirror 1 pot 0 control 80 +I0: data 0 mirror 0 pot 0 control 00 +I1: data 0 mirror 0 pot 0 control 00 +I2: data 0 mirror 0 pot 0 control 80 +I3: data 0 mirror 0 pot 0 control 80 +I4: data 0 mirror 0 pot 0 control 00 +I5: data 0 mirror 0 pot 0 control 00 +I6: data 0 mirror 0 pot 0 control 00 +I7: data 0 mirror 0 pot 0 control 00 +J0: data 0 mirror 0 pot 0 control 44 +J1: data 1 mirror 1 pot 0 control 40 +J2: data 0 mirror 0 pot 0 control 00 +J3: data 0 mirror 0 pot 0 control 80 +J4: data 1 mirror 1 pot 0 control 40 +J5: data 0 mirror 0 pot 0 control 40 +J6: data 0 mirror 0 pot 0 control 44 +J7: data 1 mirror 1 pot 0 control 80 diff --git a/models/galp5/edk2.config b/models/galp5/edk2.config new file mode 100644 index 0000000..eb4f1b9 --- /dev/null +++ b/models/galp5/edk2.config @@ -0,0 +1,2 @@ +PCIE_BASE=0xC0000000 +#SYSTEM76_EC_LOGGING=TRUE diff --git a/models/galp5/fd.rom b/models/galp5/fd.rom new file mode 100644 index 0000000..e39f122 --- /dev/null +++ b/models/galp5/fd.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:826a8f1f28a0ac8ce16e6444fb3f679947785c7049fff1033cbc4f2db8b7c4d5 +size 4096 diff --git a/models/galp5/gpio.h b/models/galp5/gpio.h new file mode 100644 index 0000000..7169155 --- /dev/null +++ b/models/galp5/gpio.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include +#include + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPD0, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1), + PAD_CFG_GPI(GPD2, NONE, PWROK), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPD7, 1, NONE, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD9, 0, NONE, PWROK), + PAD_CFG_NF(GPD10, UP_20K, DEEP, NF1), + PAD_CFG_GPI(GPD11, UP_20K, DEEP), + PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), + PAD_NC(GPP_A7, NONE), + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF2), + PAD_CFG_NF(GPP_A9, NONE, DEEP, NF3), + PAD_NC(GPP_A10, NONE), + PAD_NC(GPP_A11, NONE), + PAD_NC(GPP_A12, NONE), + PAD_CFG_TERM_GPO(GPP_A13, 1, NONE, PLTRST), + PAD_NC(GPP_A14, NONE), + PAD_NC(GPP_A15, NONE), + PAD_NC(GPP_A16, NONE), + PAD_NC(GPP_A17, NONE), + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + PAD_NC(GPP_A19, NONE), + PAD_NC(GPP_A20, NONE), + PAD_NC(GPP_A21, NONE), + PAD_NC(GPP_A22, NONE), + PAD_CFG_TERM_GPO(GPP_A23, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_B2, UP_20K, DEEP), + _PAD_CFG_STRUCT(GPP_B3, 0x80800100, 0x0000), + PAD_NC(GPP_B4, NONE), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), + PAD_CFG_TERM_GPO(GPP_B8, 1, NONE, DEEP), + PAD_NC(GPP_B9, NONE), + PAD_NC(GPP_B10, NONE), + PAD_CFG_NF(GPP_B11, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_B14, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_B15, 1, NONE, DEEP), + PAD_NC(GPP_B16, NONE), + PAD_NC(GPP_B17, NONE), + PAD_NC(GPP_B18, NONE), + PAD_NC(GPP_B19, NONE), + PAD_NC(GPP_B20, NONE), + PAD_NC(GPP_B21, NONE), + PAD_NC(GPP_B22, NONE), + PAD_CFG_TERM_GPO(GPP_B23, 0, NONE, DEEP), + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_NC(GPP_C2, NONE), + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_NC(GPP_C5, NONE), + PAD_CFG_NF(GPP_C6, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_C7, NONE, PWROK, NF1), + PAD_NC(GPP_C8, NONE), + PAD_NC(GPP_C9, NONE), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_NC(GPP_C13, NONE), + _PAD_CFG_STRUCT(GPP_C14, 0x40100100, 0x3000), + PAD_NC(GPP_C15, NONE), + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + PAD_NC(GPP_C20, NONE), + PAD_NC(GPP_C21, NONE), + PAD_CFG_TERM_GPO(GPP_C22, 1, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_C23, 0x40880100, 0x0000), + PAD_CFG_GPI(GPP_D0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_D1, 1, NONE, PLTRST), + PAD_CFG_GPI(GPP_D2, NONE, PLTRST), + PAD_CFG_GPI(GPP_D3, NONE, PLTRST), + PAD_NC(GPP_D4, NONE), + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + PAD_NC(GPP_D9, NONE), + PAD_NC(GPP_D10, NONE), + PAD_CFG_GPI(GPP_D11, DN_20K, DEEP), + PAD_CFG_GPI(GPP_D12, DN_20K, DEEP), + PAD_CFG_TERM_GPO(GPP_D13, 0, NONE, DEEP), + PAD_CFG_TERM_GPO(GPP_D14, 1, NONE, PLTRST), + PAD_NC(GPP_D15, NONE), + PAD_NC(GPP_D16, NONE), + PAD_CFG_GPI(GPP_D17, DN_20K, DEEP), + PAD_CFG_GPI(GPP_D18, DN_20K, DEEP), + PAD_NC(GPP_D19, NONE), + PAD_NC(GPP_E0, NONE), + PAD_CFG_TERM_GPO(GPP_E1, 0, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_E2, 0x40880100, 0x0000), + PAD_CFG_GPI(GPP_E3, DN_20K, DEEP), + PAD_NC(GPP_E4, NONE), + PAD_NC(GPP_E5, NONE), + PAD_NC(GPP_E6, NONE), + _PAD_CFG_STRUCT(GPP_E7, 0x82840100, 0x0000), + PAD_NC(GPP_E8, NONE), + PAD_NC(GPP_E9, NONE), + PAD_NC(GPP_E10, NONE), + PAD_NC(GPP_E11, NONE), + PAD_NC(GPP_E12, NONE), + PAD_NC(GPP_E13, NONE), + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + PAD_NC(GPP_E15, NONE), + PAD_CFG_GPI(GPP_E16, DN_20K, DEEP), + PAD_NC(GPP_E17, NONE), + PAD_NC(GPP_E18, NATIVE), + PAD_NC(GPP_E19, NATIVE), + PAD_NC(GPP_E20, NONE), + PAD_NC(GPP_E21, NONE), + PAD_NC(GPP_E22, NONE), + PAD_NC(GPP_E23, NONE), + PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F3, UP_20K, DEEP, NF1), + PAD_NC(GPP_F4, NONE), + PAD_NC(GPP_F5, NONE), + PAD_NC(GPP_F6, NONE), + PAD_CFG_TERM_GPO(GPP_F7, 1, NONE, DEEP), + PAD_NC(GPP_F8, NONE), + PAD_CFG_TERM_GPO(GPP_F9, 1, NONE, DEEP), + PAD_NC(GPP_F10, NONE), + PAD_NC(GPP_F11, NONE), + PAD_NC(GPP_F12, NONE), + PAD_NC(GPP_F13, NONE), + PAD_NC(GPP_F14, NONE), + PAD_NC(GPP_F15, NONE), + PAD_NC(GPP_F16, NONE), + PAD_CFG_GPI(GPP_F17, NONE, PLTRST), + PAD_NC(GPP_F18, NONE), + PAD_NC(GPP_F19, NONE), + PAD_NC(GPP_F20, NONE), + PAD_CFG_GPI(GPP_F21, DN_20K, DEEP), + PAD_NC(GPP_F22, NONE), + PAD_NC(GPP_F23, NONE), + PAD_CFG_TERM_GPO(GPP_H0, 1, NONE, PLTRST), + PAD_NC(GPP_H1, NONE), + PAD_NC(GPP_H2, NONE), + PAD_CFG_GPI(GPP_H3, DN_20K, DEEP), + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + PAD_NC(GPP_H6, NONE), + PAD_NC(GPP_H7, NONE), + PAD_CFG_GPI(GPP_H8, DN_20K, DEEP), + PAD_CFG_GPI(GPP_H9, DN_20K, DEEP), + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF1), + PAD_NC(GPP_H11, NONE), + PAD_NC(GPP_H12, NONE), + PAD_NC(GPP_H13, NONE), + PAD_NC(GPP_H14, NONE), + PAD_NC(GPP_H15, NONE), + PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), + PAD_NC(GPP_H19, NONE), + PAD_NC(GPP_H20, NONE), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, NONE), + PAD_NC(GPP_H23, NONE), + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1), + PAD_NC(GPP_R5, NONE), + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), + PAD_NC(GPP_S4, NONE), + PAD_NC(GPP_S5, NONE), + PAD_NC(GPP_S6, NONE), + PAD_NC(GPP_S7, NONE), + PAD_NC(GPP_T2, NONE), + PAD_NC(GPP_T3, NONE), + PAD_CFG_TERM_GPO(GPP_U4, 1, NONE, PLTRST), + PAD_CFG_TERM_GPO(GPP_U5, 1, NONE, PLTRST), +}; + +#endif + +#endif diff --git a/models/galp5/hda_verb.c b/models/galp5/hda_verb.c new file mode 100644 index 0000000..b583a5b --- /dev/null +++ b/models/galp5/hda_verb.c @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* Realtek, ALC293 */ + 0x10ec0293, /* Vendor ID */ + 0x15584018, /* Subsystem ID */ + 12, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x15584018), + AZALIA_PIN_CFG(0, 0x12, 0x90a60130), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x02211020), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x41748245), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + /* Intel, TigerlakeHDMI */ + 0x80862812, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 10, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x04, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x08, 0x18560010), + AZALIA_PIN_CFG(2, 0x0a, 0x18560010), + AZALIA_PIN_CFG(2, 0x0b, 0x18560010), + AZALIA_PIN_CFG(2, 0x0c, 0x18560010), + AZALIA_PIN_CFG(2, 0x0d, 0x18560010), + AZALIA_PIN_CFG(2, 0x0e, 0x18560010), + AZALIA_PIN_CFG(2, 0x0f, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/models/galp5/me.rom b/models/galp5/me.rom new file mode 100644 index 0000000..b49e00a --- /dev/null +++ b/models/galp5/me.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:5a6acaf3c6362a1fbcd0afb6a010f1f6d1d12d6c2aeb380874aa8764f9bf08f4 +size 5238784 diff --git a/models/galp5/microcode.rom b/models/galp5/microcode.rom new file mode 100644 index 0000000..6ec2b90 --- /dev/null +++ b/models/galp5/microcode.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc4cd808a0e1705603bbecca807194d3e24b3cce8c6d62f6671e4cda5e7bd955 +size 107520 diff --git a/models/galp5/usb4-pd.rom b/models/galp5/usb4-pd.rom new file mode 100644 index 0000000..c41acf2 --- /dev/null +++ b/models/galp5/usb4-pd.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:de1314aa5ef38eefca45ede10abb755cf3632f8cd37946cf7847f2cf01a2b580 +size 32768 diff --git a/models/galp5/usb4-retimer.rom b/models/galp5/usb4-retimer.rom new file mode 100644 index 0000000..24c06ea --- /dev/null +++ b/models/galp5/usb4-retimer.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:b785c0d1c9a3ec2b46a87e666ffd6a5d8ed3e041630607de26ef040dc0de70db +size 1048576 diff --git a/models/galp5/vbt.rom b/models/galp5/vbt.rom new file mode 100644 index 0000000..0c00d41 --- /dev/null +++ b/models/galp5/vbt.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:9a02508cfabacbbc0c98eea24e6e1b457c18bd28a35c72d8edb72dd15df11195 +size 8704 diff --git a/models/lemp10/FSP/Fsp_M.fd b/models/lemp10/FSP/Fsp_M.fd new file mode 100644 index 0000000..2a65483 --- /dev/null +++ b/models/lemp10/FSP/Fsp_M.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:23305ad95f1d05d58ca6719df91b44ebf874702f9d572d4b2614c0b13009c866 +size 651264 diff --git a/models/lemp10/FSP/Fsp_S.fd b/models/lemp10/FSP/Fsp_S.fd new file mode 100644 index 0000000..108a145 --- /dev/null +++ b/models/lemp10/FSP/Fsp_S.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:c43ec298a13c0c5658ca299adfe6c803d309ae4602ec2fbc8d6fbc7ecf459f5d +size 368640 diff --git a/models/lemp10/FSP/Fsp_T.fd b/models/lemp10/FSP/Fsp_T.fd new file mode 100644 index 0000000..6dcc56a --- /dev/null +++ b/models/lemp10/FSP/Fsp_T.fd @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:52b36311001a3f2b2c5731c7246f23a9806f983913b4cff916c216fcd3efa2c5 +size 28672 diff --git a/models/lemp10/FSP/Include/FirmwareVersionInfoHob.h b/models/lemp10/FSP/Include/FirmwareVersionInfoHob.h new file mode 100644 index 0000000..54543d4 --- /dev/null +++ b/models/lemp10/FSP/Include/FirmwareVersionInfoHob.h @@ -0,0 +1,69 @@ +/** @file + Header file for Firmware Version Information + + @copyright + INTEL CONFIDENTIAL + Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.
+ + This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License which accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php + + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +**/ + +#ifndef _FIRMWARE_VERSION_INFO_HOB_H_ +#define _FIRMWARE_VERSION_INFO_HOB_H_ + +#include +#include +#include + +#pragma pack(1) +/// +/// Firmware Version Structure +/// +typedef struct { + UINT8 MajorVersion; + UINT8 MinorVersion; + UINT8 Revision; + UINT16 BuildNumber; +} FIRMWARE_VERSION; + +/// +/// Firmware Version Information Structure +/// +typedef struct { + UINT8 ComponentNameIndex; ///< Offset 0 Index of Component Name + UINT8 VersionStringIndex; ///< Offset 1 Index of Version String + FIRMWARE_VERSION Version; ///< Offset 2-6 Firmware version +} FIRMWARE_VERSION_INFO; + +#ifndef __SMBIOS_STANDARD_H__ +/// +/// The Smbios structure header. +/// +typedef struct { + UINT8 Type; + UINT8 Length; + UINT16 Handle; +} SMBIOS_STRUCTURE; +#endif + +/// +/// Firmware Version Information HOB Structure +/// +typedef struct { + EFI_HOB_GUID_TYPE Header; ///< Offset 0-23 The header of FVI HOB + SMBIOS_STRUCTURE SmbiosData; ///< Offset 24-27 The SMBIOS header of FVI HOB + UINT8 Count; ///< Offset 28 Number of FVI elements included. +/// +/// FIRMWARE_VERSION_INFO structures followed by the null terminated string buffer +/// +} FIRMWARE_VERSION_INFO_HOB; +#pragma pack() + +#endif // _FIRMWARE_VERSION_INFO_HOB_H_ diff --git a/models/lemp10/FSP/Include/FspInfoHob.h b/models/lemp10/FSP/Include/FspInfoHob.h new file mode 100644 index 0000000..bc82ddf --- /dev/null +++ b/models/lemp10/FSP/Include/FspInfoHob.h @@ -0,0 +1,56 @@ +/** @file + Header file for FSP Information HOB. + +@copyright + INTEL CONFIDENTIAL + Copyright 2017 - 2019 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ + +#ifndef _FSP_INFO_HOB_H_ +#define _FSP_INFO_HOB_H_ + +extern EFI_GUID gFspInfoGuid; + +#pragma pack (push, 1) + +typedef struct { +UINT8 SiliconInitVersionMajor; +UINT8 SiliconInitVersionMinor; +UINT8 SiliconInitVersionRevision; +UINT8 SiliconInitVersionBuild; +UINT8 FspVersionRevision; +UINT8 FspVersionBuild; +UINT8 TimeStamp [12]; +UINT8 FspVersionMinor; +} FSP_INFO_HOB; + +#pragma pack (pop) + +#endif // _FSP_INFO_HOB_H_ diff --git a/models/lemp10/FSP/Include/FspUpd.h b/models/lemp10/FSP/Include/FspUpd.h new file mode 100644 index 0000000..8315336 --- /dev/null +++ b/models/lemp10/FSP/Include/FspUpd.h @@ -0,0 +1,48 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPUPD_H__ +#define __FSPUPD_H__ + +#include + +#pragma pack(1) + +#define FSPT_UPD_SIGNATURE 0x545F4450554C4754 /* 'TGLUPD_T' */ + +#define FSPM_UPD_SIGNATURE 0x4D5F4450554C4754 /* 'TGLUPD_M' */ + +#define FSPS_UPD_SIGNATURE 0x535F4450554C4754 /* 'TGLUPD_S' */ + +#pragma pack() + +#endif diff --git a/models/lemp10/FSP/Include/FspmUpd.h b/models/lemp10/FSP/Include/FspmUpd.h new file mode 100644 index 0000000..8d2db72 --- /dev/null +++ b/models/lemp10/FSP/Include/FspmUpd.h @@ -0,0 +1,3574 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPMUPD_H__ +#define __FSPMUPD_H__ + +#include + +#pragma pack(1) + + +#include + +/// +/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. +/// +typedef struct { + UINT8 Revision; ///< Chipset Init Info Revision + UINT8 Rsvd[3]; ///< Reserved + UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table + UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table +} CHIPSET_INIT_INFO; + + +/** Fsp M Configuration +**/ +typedef struct { + +/** Offset 0x0040 - Platform Reserved Memory Size + The minimum platform memory size required to pass control into DXE +**/ + UINT64 PlatformMemorySize; + +/** Offset 0x0048 - SPD Data Length + Length of SPD Data + 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes +**/ + UINT16 MemorySpdDataLen; + +/** Offset 0x004A - Enable above 4GB MMIO resource support + Enable/disable above 4GB MMIO resource support + $EN_DIS +**/ + UINT8 EnableAbove4GBMmio; + +/** Offset 0x004B - Enable/Disable CrashLog Device 10 + Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog + $EN_DIS +**/ + UINT8 CpuCrashLogDevice; + +/** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr00] +**/ + UINT32 MemorySpdPtr000; + +/** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr01] +**/ + UINT32 MemorySpdPtr001; + +/** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr02] +**/ + UINT32 MemorySpdPtr010; + +/** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr03] +**/ + UINT32 MemorySpdPtr011; + +/** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr04] +**/ + UINT32 MemorySpdPtr020; + +/** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr05] +**/ + UINT32 MemorySpdPtr021; + +/** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr06] +**/ + UINT32 MemorySpdPtr030; + +/** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr07] +**/ + UINT32 MemorySpdPtr031; + +/** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr08] +**/ + UINT32 MemorySpdPtr100; + +/** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr09] +**/ + UINT32 MemorySpdPtr101; + +/** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr10] +**/ + UINT32 MemorySpdPtr110; + +/** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr11] +**/ + UINT32 MemorySpdPtr111; + +/** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr12] +**/ + UINT32 MemorySpdPtr120; + +/** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr13] +**/ + UINT32 MemorySpdPtr121; + +/** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr14] +**/ + UINT32 MemorySpdPtr130; + +/** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 + Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked + as 00 [ALIAS_NAME MemorySpdPtr15] +**/ + UINT32 MemorySpdPtr131; + +/** Offset 0x008C - RcompResistor settings + Indicates RcompResistor settings: Board-dependent +**/ + UINT16 RcompResistor; + +/** Offset 0x008E - RcompTarget settings + RcompTarget settings: board-dependent +**/ + UINT16 RcompTarget[5]; + +/** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh0] +**/ + UINT8 DqsMapCpu2DramMc0Ch0[2]; + +/** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh1] +**/ + UINT8 DqsMapCpu2DramMc0Ch1[2]; + +/** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh2] +**/ + UINT8 DqsMapCpu2DramMc0Ch2[2]; + +/** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh3] +**/ + UINT8 DqsMapCpu2DramMc0Ch3[2]; + +/** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0 + Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh4] +**/ + UINT8 DqsMapCpu2DramMc1Ch0[2]; + +/** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1 + Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh5] +**/ + UINT8 DqsMapCpu2DramMc1Ch1[2]; + +/** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2 + Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh6] +**/ + UINT8 DqsMapCpu2DramMc1Ch2[2]; + +/** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3 + Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqsMapCpu2DramCh7] +**/ + UINT8 DqsMapCpu2DramMc1Ch3[2]; + +/** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh0] +**/ + UINT8 DqMapCpu2DramMc0Ch0[16]; + +/** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh1] +**/ + UINT8 DqMapCpu2DramMc0Ch1[16]; + +/** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh2] +**/ + UINT8 DqMapCpu2DramMc0Ch2[16]; + +/** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh3] +**/ + UINT8 DqMapCpu2DramMc0Ch3[16]; + +/** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0 + Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent [ALIAS_NAME + DqMapCpu2DramCh4] +**/ + UINT8 DqMapCpu2DramMc1Ch0[16]; + +/** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1 + Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent [ALIAS_NAME + DqMapCpu2DramCh5] +**/ + UINT8 DqMapCpu2DramMc1Ch1[16]; + +/** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2 + Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent [ALIAS_NAME + DqMapCpu2DramCh6] +**/ + UINT8 DqMapCpu2DramMc1Ch2[16]; + +/** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3 + Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent [ALIAS_NAME + DqMapCpu2DramCh7] +**/ + UINT8 DqMapCpu2DramMc1Ch3[16]; + +/** Offset 0x0128 - Dqs Pins Interleaved Setting + Indicates DqPinsInterleaved setting: board-dependent + $EN_DIS +**/ + UINT8 DqPinsInterleaved; + +/** Offset 0x0129 - Smram Mask + The SMM Regions AB-SEG and/or H-SEG reserved + 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both +**/ + UINT8 SmramMask; + +/** Offset 0x012A - MRC Fast Boot + Enables/Disable the MRC fast path thru the MRC + $EN_DIS +**/ + UINT8 MrcFastBoot; + +/** Offset 0x012B - Rank Margin Tool per Task + This option enables the user to execute Rank Margin Tool per major training step + in the MRC. + $EN_DIS +**/ + UINT8 RmtPerTask; + +/** Offset 0x012C - Training Trace + This option enables the trained state tracing feature in MRC. This feature will + print out the key training parameters state across major training steps. + $EN_DIS +**/ + UINT8 TrainTrace; + +/** Offset 0x012D +**/ + UINT8 UnusedUpdSpace0[3]; + +/** Offset 0x0130 - Intel Enhanced Debug + @deprecated - Not used and has no effect + 0 : Disable, 0x400000 : Enable +**/ + UINT32 IedSize; + +/** Offset 0x0134 - Tseg Size + Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build + 0x0400000:4MB, 0x01000000:16MB +**/ + UINT32 TsegSize; + +/** Offset 0x0138 - MMIO Size + Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB +**/ + UINT16 MmioSize; + +/** Offset 0x013A - Probeless Trace + Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. + This also requires IED to be enabled. + $EN_DIS +**/ + UINT8 ProbelessTrace; + +/** Offset 0x013B - Enable SMBus + Enable/disable SMBus controller. + $EN_DIS +**/ + UINT8 SmbusEnable; + +/** Offset 0x013C - Spd Address Tabl + Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used + if SPD Address is 00 +**/ + UINT8 SpdAddressTable[16]; + +/** Offset 0x014C - Platform Debug Consent + To 'opt-in' for debug, please select 'Enabled' with the desired debug probe type. + Enabling this BIOS option may alter the default value of other debug-related BIOS + options.\Manual: Do not use Platform Debug Consent to override other debug-relevant + policies, but the user must set each debug option manually, aimed at advanced users.\n + Note: DCI OOB (aka BSSB) uses CCA probe;[DCI OOB+DbC] and [USB2 DbC] have the same setting. + 0:Disabled, 1:Enabled (DCI OOB+[DbC]), 2:Enabled (DCI OOB), 3:Enabled (USB3 DbC), + 4:Enabled (XDP/MIPI60), 5:Enabled (USB2 DbC), 6:Enable (2-wire DCI OOB), 7:Manual +**/ + UINT8 PlatformDebugConsent; + +/** Offset 0x014D - DCI Enable + Determine if to enable DCI debug from host + $EN_DIS +**/ + UINT8 DciEn; + +/** Offset 0x014E - DCI DbC Mode + Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: + Set both USB2/3DBCEN; No Change: Comply with HW value + 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change +**/ + UINT8 DciDbcMode; + +/** Offset 0x014F - Enable DCI ModPHY Power Gate + Enable ModPHY Power Gate when DCI is enabled + $EN_DIS +**/ + UINT8 DciModphyPg; + +/** Offset 0x0150 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support + This BIOS option enables kernel and platform debug for USB3 interface over a UFP + Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DciUsb3TypecUfpDbg; + +/** Offset 0x0151 - PCH Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode +**/ + UINT8 PchTraceHubMode; + +/** Offset 0x0152 - PCH Trace Hub Memory Region 0 buffer Size + Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg0Size; + +/** Offset 0x0153 - PCH Trace Hub Memory Region 1 buffer Size + Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (PCH + CPU) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 PchTraceHubMemReg1Size; + +/** Offset 0x0154 - HD Audio DMIC Link Clock Select + Determines DMIC Clock Source. 0: Both, 1: ClkA, 2: ClkB + 0: Both, 1: ClkA, 2: ClkB +**/ + UINT8 PchHdaAudioLinkDmicClockSelect[2]; + +/** Offset 0x0156 - PchPreMemRsvd + Reserved for PCH Pre-Mem Reserved + $EN_DIS +**/ + UINT8 PchPreMemRsvd[5]; + +/** Offset 0x015B - State of X2APIC_OPT_OUT bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 X2ApicOptOut; + +/** Offset 0x015C - State of DMA_CONTROL_GUARANTEE bit in the DMAR table + 0=Disable/Clear, 1=Enable/Set + $EN_DIS +**/ + UINT8 DmaControlGuarantee; + +/** Offset 0x015D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0160 - Base addresses for VT-d function MMIO access + Base addresses for VT-d MMIO access per VT-d engine +**/ + UINT32 VtdBaseAddress[9]; + +/** Offset 0x0184 - Disable VT-d + 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) + $EN_DIS +**/ + UINT8 VtdDisable; + +/** Offset 0x0185 - Vtd Programming for Igd + 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIgdEnable; + +/** Offset 0x0186 - Vtd Programming for Ipu + 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIpuEnable; + +/** Offset 0x0187 - Vtd Programming for Iop + 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdIopEnable; + +/** Offset 0x0188 - Vtd Programming for ITbt + 1=Enable/TRUE (ITbt VT-d Bar programming enabled), 0=Disable/FLASE (ITbt VT-d Bar + programming disabled) + $EN_DIS +**/ + UINT8 VtdItbtEnable; + +/** Offset 0x0189 - Internal Graphics Pre-allocated Memory + Size of memory preallocated for internal graphics. + 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, + 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, + 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB +**/ + UINT8 IgdDvmt50PreAlloc; + +/** Offset 0x018A - Internal Graphics + Enable/disable internal graphics. + $EN_DIS +**/ + UINT8 InternalGfx; + +/** Offset 0x018B - Aperture Size + Select the Aperture Size. + 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB +**/ + UINT8 ApertureSize; + +/** Offset 0x018C - Board Type + MrcBoardType, Options are 0=Mobile/Mobile Halo, 1=Desktop/DT Halo, 5=ULT/ULX/Mobile + Halo, 7=UP Server + 0:Mobile/Mobile Halo, 1:Desktop/DT Halo, 5:ULT/ULX/Mobile Halo, 7:UP Server +**/ + UINT8 UserBd; + +/** Offset 0x018D +**/ + UINT8 UnusedUpdSpace2; + +/** Offset 0x018E - DDR Frequency Limit + Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, + 2133, 2400, 2667, 2933 and 0 for Auto. + 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto +**/ + UINT16 DdrFreqLimit; + +/** Offset 0x0190 - SA GV + System Agent dynamic frequency support and when enabled memory will be training + at three different frequencies. + 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled +**/ + UINT8 SaGv; + +/** Offset 0x0191 - Memory Test on Warm Boot + Run Base Memory Test on Warm Boot + 0:Disable, 1:Enable +**/ + UINT8 MemTestOnWarmBoot; + +/** Offset 0x0192 - DDR Speed Control + DDR Frequency and Gear control for all SAGV points. + 0:Auto, 1:Manual +**/ + UINT8 DdrSpeedControl; + +/** Offset 0x0193 - Rank Margin Tool + Enable/disable Rank Margin Tool. + $EN_DIS +**/ + UINT8 RMT; + +/** Offset 0x0194 - Controller 0 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh0] +**/ + UINT8 DisableDimmMc0Ch0; + +/** Offset 0x0195 - Controller 0 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh1] +**/ + UINT8 DisableDimmMc0Ch1; + +/** Offset 0x0196 - Controller 0 Channel 2 DIMM Control + Controller 0 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh2] +**/ + UINT8 DisableDimmMc0Ch2; + +/** Offset 0x0197 - Controller 0 Channel 3 DIMM Control + Controller 0 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh3] +**/ + UINT8 DisableDimmMc0Ch3; + +/** Offset 0x0198 - Controller 1 Channel 0 DIMM Control + Controller 1 Channel 0 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh4] +**/ + UINT8 DisableDimmMc1Ch0; + +/** Offset 0x0199 - Controller 1 Channel 1 DIMM Control + Controller 1 Channel 1 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh5] +**/ + UINT8 DisableDimmMc1Ch1; + +/** Offset 0x019A - Controller 1 Channel 2 DIMM Control + Controller 1 Channel 2 DIMM Control Support - Enable or Disable Dimms on Channel A. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh6] +**/ + UINT8 DisableDimmMc1Ch2; + +/** Offset 0x019B - Controller 1 Channel 3 DIMM Control + Controller 1 Channel 3 DIMM Control Support - Enable or Disable Dimms on Channel B. + 0:Enable both DIMMs, 1:Disable DIMM0, 2:Disable DIMM1, 3:Disable both DIMMs [ALIAS_NAME + DisableDimmCh7] +**/ + UINT8 DisableDimmMc1Ch3; + +/** Offset 0x019C - Scrambler Support + This option enables data scrambling in memory. + $EN_DIS +**/ + UINT8 ScramblerSupport; + +/** Offset 0x019D - SPD Profile Selected + Select DIMM timing profile. Options are 0=Default Profile, 1=Custom Profile, 2=XMP + Profile 1, 3=XMP Profile 2 + 0:Default Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2 +**/ + UINT8 SpdProfileSelected; + +/** Offset 0x019E - Memory Reference Clock + 100MHz, 133MHz. + 0:133MHz, 1:100MHz +**/ + UINT8 RefClk; + +/** Offset 0x019F +**/ + UINT8 UnusedUpdSpace3; + +/** Offset 0x01A0 - Memory Voltage + DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM + chips) in millivolts. 0=Platform Default (no override), 1200=1.2V, 1350=1.35V etc. + 0:Default, 1200:1.20 Volts, 1250:1.25 Volts, 1300:1.30 Volts, 1350:1.35 Volts, 1400:1.40 + Volts, 1450:1.45 Volts, 1500:1.50 Volts, 1550:1.55 Volts, 1600:1.60 Volts, 1650:1.65 Volts +**/ + UINT16 VddVoltage; + +/** Offset 0x01A2 - Memory Ratio + Automatic or the frequency will equal ratio times reference clock. Set to Auto to + recalculate memory timings listed below. + 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 +**/ + UINT8 Ratio; + +/** Offset 0x01A3 - tCL + CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCL; + +/** Offset 0x01A4 - tCWL + Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tCWL; + +/** Offset 0x01A5 +**/ + UINT8 UnusedUpdSpace4; + +/** Offset 0x01A6 - tFAW + Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tFAW; + +/** Offset 0x01A8 - tRAS + RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRAS; + +/** Offset 0x01AA - tRCD/tRP + RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used + if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). +**/ + UINT8 tRCDtRP; + +/** Offset 0x01AB +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x01AC - tREFI + Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tREFI; + +/** Offset 0x01AE - tRFC + Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT16 tRFC; + +/** Offset 0x01B0 - tRRD + Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRRD; + +/** Offset 0x01B1 - tRTP + Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal + values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tRTP; + +/** Offset 0x01B2 - tWR + Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, + 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). + 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, + 34:34, 40:40 +**/ + UINT8 tWR; + +/** Offset 0x01B3 - tWTR + Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected + == 1 (Custom Profile). +**/ + UINT8 tWTR; + +/** Offset 0x01B4 - NMode + System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N +**/ + UINT8 NModeSupport; + +/** Offset 0x01B5 - Enable Intel HD Audio (Azalia) + 0: Disable, 1: Enable (Default) Azalia controller + $EN_DIS +**/ + UINT8 PchHdaEnable; + +/** Offset 0x01B6 - Enable PCH ISH Controller + 0: Disable, 1: Enable (Default) ISH Controller + $EN_DIS +**/ + UINT8 PchIshEnable; + +/** Offset 0x01B7 - CPU Trace Hub Mode + Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' + if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. + 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode +**/ + UINT8 CpuTraceHubMode; + +/** Offset 0x01B8 - CPU Trace Hub Memory Region 0 + CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg0Size; + +/** Offset 0x01B9 - CPU Trace Hub Memory Region 1 + CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, + 128MB, 256MB, 512MB. Note : Limitation of total buffer size (CPU + PCH) is 512MB. + 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB +**/ + UINT8 CpuTraceHubMemReg1Size; + +/** Offset 0x01BA - SAGV Gear Ratio + Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 SaGvGear[4]; + +/** Offset 0x01BE - SAGV Frequency + SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. +**/ + UINT16 SaGvFreq[4]; + +/** Offset 0x01C6 - SAGV Disabled Gear Ratio + Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 +**/ + UINT8 GearRatio; + +/** Offset 0x01C7 - HECI Timeouts + 0: Disable, 1: Enable (Default) timeout check for HECI + $EN_DIS +**/ + UINT8 HeciTimeouts; + +/** Offset 0x01C8 - HECI1 BAR address + BAR address of HECI1 +**/ + UINT32 Heci1BarAddress; + +/** Offset 0x01CC - HECI2 BAR address + BAR address of HECI2 +**/ + UINT32 Heci2BarAddress; + +/** Offset 0x01D0 - HECI3 BAR address + BAR address of HECI3 +**/ + UINT32 Heci3BarAddress; + +/** Offset 0x01D4 - HG dGPU Power Delay + HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is + 300=300 microseconds +**/ + UINT16 HgDelayAfterPwrEn; + +/** Offset 0x01D6 - HG dGPU Reset Delay + HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 + microseconds +**/ + UINT16 HgDelayAfterHoldReset; + +/** Offset 0x01D8 - MMIO size adjustment for AUTO mode + Positive number means increasing MMIO size, Negative value means decreasing MMIO + size: 0 (Default)=no change to AUTO mode MMIO size +**/ + UINT16 MmioSizeAdjustment; + +/** Offset 0x01DA - PCIe ASPM programming will happen in relation to the Oprom + Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): + Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after + Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume + 0:Before, 1:After +**/ + UINT8 InitPcieAspmAfterOprom; + +/** Offset 0x01DB - Selection of the primary display device + 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics + 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics +**/ + UINT8 PrimaryDisplay; + +/** Offset 0x01DC - Selection of PSMI Region size + 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 + 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB +**/ + UINT8 PsmiRegionSize; + +/** Offset 0x01DD +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x01E0 - Temporary MMIO address for GMADR + Obsolete field now and it has been extended to 64 bit address, used GmAdr64 +**/ + UINT32 GmAdr; + +/** Offset 0x01E4 - Temporary MMIO address for GTTMMADR + The reference code will use this as Temporary MMIO address space to access GTTMMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr + to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO + + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) +**/ + UINT32 GttMmAdr; + +/** Offset 0x01E8 - Selection of iGFX GTT Memory size + 1=2MB, 2=4MB, 3=8MB, Default is 3 + 1:2MB, 2:4MB, 3:8MB +**/ + UINT16 GttSize; + +/** Offset 0x01EA +**/ + UINT8 UnusedUpdSpace7[2]; + +/** Offset 0x01EC - Hybrid Graphics GPIO information for PEG 0 + Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie0Rtd3Gpio[24]; + +/** Offset 0x024C - Enable/Disable MRC TXT dependency + When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): + MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization + $EN_DIS +**/ + UINT8 TxtImplemented; + +/** Offset 0x024D - Enable/Disable SA OcSupport + Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport + $EN_DIS +**/ + UINT8 SaOcSupport; + +/** Offset 0x024E - GT slice Voltage Mode + 0(Default): Adaptive, 1: Override + 0: Adaptive, 1: Override +**/ + UINT8 GtVoltageMode; + +/** Offset 0x024F - Maximum GTs turbo ratio override + 0(Default)=Minimal/Auto, 60=Maximum +**/ + UINT8 GtMaxOcRatio; + +/** Offset 0x0250 - The voltage offset applied to GT slice + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 GtVoltageOffset; + +/** Offset 0x0252 - The GT slice voltage override which is applied to the entire range of GT frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtVoltageOverride; + +/** Offset 0x0254 - adaptive voltage applied during turbo frequencies + 0(Default)=Minimal, 2000=Maximum +**/ + UINT16 GtExtraTurboVoltage; + +/** Offset 0x0256 - voltage offset applied to the SA + 0(Default)=Minimal, 1000=Maximum +**/ + UINT16 SaVoltageOffset; + +/** Offset 0x0258 - PCIe root port Function number for Hybrid Graphics dGPU + Root port Index number to indicate which PCIe root port has dGPU +**/ + UINT8 RootPortIndex; + +/** Offset 0x0259 - Realtime Memory Timing + 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform + realtime memory timing changes after MRC_DONE. + 0: Disabled, 1: Enabled +**/ + UINT8 RealtimeMemoryTiming; + +/** Offset 0x025A - iTBT PCIe Multiple Segment setting + When Disabled all the TBT PCIe RP are located at Segment0, When Enabled all the + TBT PCIe RP are located at Segment1. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PcieMultipleSegmentEnabled; + +/** Offset 0x025B - Enable/Disable SA IPU + Enable(Default): Enable SA IPU, Disable: Disable SA IPU + $EN_DIS +**/ + UINT8 SaIpuEnable; + +/** Offset 0x025C - IPU IMR Configuration + 0:IPU Camera, 1:IPU Gen Default is 0 + 0:IPU Camera, 1:IPU Gen +**/ + UINT8 SaIpuImrConfiguration; + +/** Offset 0x025D - IMGU CLKOUT Configuration + The configuration of IMGU CLKOUT, 0: Disable;1: Enable. + $EN_DIS +**/ + UINT8 ImguClkOutEn[6]; + +/** Offset 0x0263 +**/ + UINT8 UnusedUpdSpace8; + +/** Offset 0x0264 - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 CpuPcieRpEnableMask; + +/** Offset 0x0268 - Assertion on Link Down GPIOs + GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down + GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpLinkDownGpios; + +/** Offset 0x0269 - Enable ClockReq Messaging + ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default): + Enable ClockReq Messaging [ALIAS_NAME RpClockReqMsgEnable] + 0:Disable, 1:Enable +**/ + UINT8 CpuPcieRpClockReqMsgEnable; + +/** Offset 0x026A - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; + 4: Gen4 (see: CPU_PCIE_SPEED). [ALIAS_NAME RpPcieThresholdBytes] +**/ + UINT8 CpuPcieRpPcieSpeed[4]; + +/** Offset 0x026E - Selection of PSMI Support On/Off + 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support + $EN_DIS +**/ + UINT8 GtPsmiSupport; + +/** Offset 0x026F - Selection of DiSM Region Size + DiSM Size to be allocated for 2LM Sku Default is 0 + 0:0GB, 1:1GB, 2:2GB, 3:3GB, 4:4GB, 5:5GB, 6:6GB, 7:7GB +**/ + UINT8 DismSize; + +/** Offset 0x0270 - Enable Display memory map programming for DFD Restore + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DfdRestoreEnable; + +/** Offset 0x0271 - Program GPIOs for LFP on DDI port-A device + 0=Disabled,1(Default)=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortAConfig; + +/** Offset 0x0272 - Program GPIOs for LFP on DDI port-B device + 0(Default)=Disabled,1=eDP, 2=MIPI DSI + 0:Disabled, 1:eDP, 2:MIPI DSI +**/ + UINT8 DdiPortBConfig; + +/** Offset 0x0273 - Enable or disable HPD of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortAHpd; + +/** Offset 0x0274 - Enable or disable HPD of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBHpd; + +/** Offset 0x0275 - Enable or disable HPD of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCHpd; + +/** Offset 0x0276 - Enable or disable HPD of DDI port 1 + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPort1Hpd; + +/** Offset 0x0277 - Enable or disable HPD of DDI port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Hpd; + +/** Offset 0x0278 - Enable or disable HPD of DDI port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Hpd; + +/** Offset 0x0279 - Enable or disable HPD of DDI port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Hpd; + +/** Offset 0x027A - Enable or disable DDC of DDI port A + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortADdc; + +/** Offset 0x027B - Enable or disable DDC of DDI port B + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 DdiPortBDdc; + +/** Offset 0x027C - Enable or disable DDC of DDI port C + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPortCDdc; + +/** Offset 0x027D - Enable DDC setting of DDI Port 1 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort1Ddc; + +/** Offset 0x027E - Enable DDC setting of DDI Port 2 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort2Ddc; + +/** Offset 0x027F - Enable DDC setting of DDI Port 3 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort3Ddc; + +/** Offset 0x0280 - Enable DDC setting of DDI Port 4 + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 DdiPort4Ddc; + +/** Offset 0x0281 - Enable Gt CLOS + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 GtClosEnable; + +/** Offset 0x0282 +**/ + UINT8 UnusedUpdSpace9[6]; + +/** Offset 0x0288 - Temporary MMIO address for GMADR + The reference code will use this as Temporary MMIO address space to access GMADR + Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to + (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress + - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB) +**/ + UINT64 GmAdr64; + +/** Offset 0x0290 - Hybrid Graphics Slot Selection + PEG or PCH Slot Selection for Hybrid Graphics +**/ + UINT8 HgSlot; + +/** Offset 0x0291 - DMI ASPM Configuration:{Combo + Set ASPM Configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspm; + +/** Offset 0x0292 - DMI ASPM Control Configuration:{Combo + Set ASPM Control configuration + 0:Disabled, 1:L0s, 2:L1, 3:L1L0s +**/ + UINT8 DmiAspmCtrl; + +/** Offset 0x0293 - DMI ASPM L1 exit Latency + Range: 0-7, 4 is default L1 exit Latency +**/ + UINT8 DmiAspmL1ExitLatency; + +/** Offset 0x0294 - Per-core HT Disable + Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, + 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value + of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have + HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. +**/ + UINT16 PerCoreHtDisable; + +/** Offset 0x0296 - DEKEL CDR Relock + Enable/Disable CDR Relock. 0: Disable(Default); 1: Enable +**/ + UINT8 CpuPcieRpCdrRelock[4]; + +/** Offset 0x029A - SaPreMemProductionRsvd + Reserved for SA Pre-Mem Production + $EN_DIS +**/ + UINT8 SaPreMemProductionRsvd[96]; + +/** Offset 0x02FA - DMI Max Link Speed + Auto (0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 Speed, Gen2(0x2): + Limit Link to Gen2 Speed, (Default) Gen3(0x3):Limit Link to Gen3 Speed + 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 +**/ + UINT8 DmiMaxLinkSpeed; + +/** Offset 0x02FB - DMI Equalization Phase 2 + DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): + AUTO - Use the current default method + 0:Disable phase2, 1:Enable phase2, 2:Auto +**/ + UINT8 DmiGen3EqPh2Enable; + +/** Offset 0x02FC - DMI Gen3 Equalization Phase3 + DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, + HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software + Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static + EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just + Phase1), Disabled(0x4): Bypass Equalization Phase 3 + 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 +**/ + UINT8 DmiGen3EqPh3Method; + +/** Offset 0x02FD - Enable/Disable DMI GEN3 Static EQ Phase1 programming + Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static + Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiGen3ProgramStaticEq; + +/** Offset 0x02FE - DeEmphasis control for DMI + DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB + 0: -6dB, 1: -3.5dB +**/ + UINT8 DmiDeEmphasis; + +/** Offset 0x02FF - DMI Gen3 Root port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane +**/ + UINT8 DmiGen3RootPortPreset[8]; + +/** Offset 0x0307 - DMI Gen3 End port preset values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane +**/ + UINT8 DmiGen3EndPointPreset[8]; + +/** Offset 0x030F - DMI Gen3 End port Hint values per lane + Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 DmiGen3EndPointHint[8]; + +/** Offset 0x0317 - DMI Gen3 RxCTLEp per-Bundle control + Range: 0-15, 0 is default for each bundle, must be specified based upon platform design +**/ + UINT8 DmiGen3RxCtlePeaking[4]; + +/** Offset 0x031B - BIST on Reset + Enable or Disable BIST on Reset; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 BistOnReset; + +/** Offset 0x031C - Skip Stop PBET Timer Enable/Disable + Skip Stop PBET Timer; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 SkipStopPbet; + +/** Offset 0x031D - C6DRAM power gating feature + This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM + power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating + feature.- 1: Allocate PRMRR memory for C6DRAM power gating feature. + $EN_DIS +**/ + UINT8 EnableC6Dram; + +/** Offset 0x031E - Over clocking support + Over clocking support; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcSupport; + +/** Offset 0x031F - Over clocking Lock + Over clocking Lock Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 OcLock; + +/** Offset 0x0320 - Maximum Core Turbo Ratio Override + Maximum core turbo ratio override allows to increase CPU core frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 CoreMaxOcRatio; + +/** Offset 0x0321 - Core voltage mode + Core voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 CoreVoltageMode; + +/** Offset 0x0322 - Maximum clr turbo ratio override + Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the + fused max turbo ratio limit. 0: Hardware defaults. Range: 0-85 +**/ + UINT8 RingMaxOcRatio; + +/** Offset 0x0323 - Hyper Threading Enable/Disable + Enable or Disable Hyper Threading; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 HyperThreading; + +/** Offset 0x0324 - Enable or Disable CPU Ratio Override + Enable or Disable CPU Ratio Override; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuRatioOverride; + +/** Offset 0x0325 - CPU ratio value + CPU ratio value. Valid Range 0 to 63 +**/ + UINT8 CpuRatio; + +/** Offset 0x0326 - Boot frequency + Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. + 1: Maximum non-turbo performance. 2: Turbo performance + 0:0, 1:1, 2:2 +**/ + UINT8 BootFrequency; + +/** Offset 0x0327 - Number of active cores + Number of active cores(Depends on Number of cores). 0: All;1: 1 ;2: + 2 ;3: 3 + 0:All, 1:1, 2:2, 3:3 +**/ + UINT8 ActiveCoreCount; + +/** Offset 0x0328 - Processor Early Power On Configuration FCLK setting + 0: 800 MHz (ULT/ULX). 1: 1 GHz (DT/Halo). Not supported on ULT/ULX.- + 2: 400 MHz. - 3: Reserved + 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved +**/ + UINT8 FClkFrequency; + +/** Offset 0x0329 - Set JTAG power in C10 and deeper power states + False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 + and deeper power states for debug purpose. 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 JtagC10PowerGateDisable; + +/** Offset 0x032A - Enable or Disable VMX + Enable or Disable VMX; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 VmxEnable; + +/** Offset 0x032B - AVX2 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx2RatioOffset; + +/** Offset 0x032C - AVX3 Ratio Offset + 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio + vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. +**/ + UINT8 Avx3RatioOffset; + +/** Offset 0x032D - BCLK Adaptive Voltage Enable + When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. 0: + Disable; 1: Enable + $EN_DIS +**/ + UINT8 BclkAdaptiveVoltage; + +/** Offset 0x032E - core voltage override + The core voltage override which is applied to the entire range of cpu core frequencies. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageOverride; + +/** Offset 0x0330 - Core Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 CoreVoltageAdaptive; + +/** Offset 0x0332 - Core Turbo voltage Offset + The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 +**/ + UINT16 CoreVoltageOffset; + +/** Offset 0x0334 - Core PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 CorePllVoltageOffset; + +/** Offset 0x0335 - Ring Downbin + Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always + lower than the core ratio.0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 RingDownBin; + +/** Offset 0x0336 - Ring voltage mode + Ring voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 RingVoltageMode; + +/** Offset 0x0337 - TjMax Offset + TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support + TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 +**/ + UINT8 TjMaxOffset; + +/** Offset 0x0338 - Ring voltage override + The ring voltage override which is applied to the entire range of cpu ring frequencies. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageOverride; + +/** Offset 0x033A - Ring Turbo voltage Adaptive + Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. + Valid Range 0 to 2000 +**/ + UINT16 RingVoltageAdaptive; + +/** Offset 0x033C - Ring Turbo voltage Offset + The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 +**/ + UINT16 RingVoltageOffset; + +/** Offset 0x033E - Enable or Disable TME + Enable or Disable TME; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TmeEnable; + +/** Offset 0x033F - Enable CPU CrashLog + Enable or Disable CPU CrashLog; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CpuCrashLogEnable; + +/** Offset 0x0340 - ElixirSpringsPatchAddr + DEPRECATED +**/ + UINT32 ElixirSpringsPatchAddr; + +/** Offset 0x0344 - ElixirSpringsPatchSize + DEPRECATED +**/ + UINT32 ElixirSpringsPatchSize; + +/** Offset 0x0348 - CPU Run Control + Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; 2: + No Change + 0:Disabled, 1:Enabled, 2:No Change +**/ + UINT8 DebugInterfaceEnable; + +/** Offset 0x0349 - CPU Run Control Lock + Lock or Unlock CPU Run Control; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DebugInterfaceLockEnable; + +/** Offset 0x034A - BiosGuard + Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable + $EN_DIS +**/ + UINT8 BiosGuard; + +/** Offset 0x034B +**/ + UINT8 BiosGuardToolsInterface; + +/** Offset 0x034C - EnableSgx + Enable/Disable. 0: Disable, Enable/Disable SGX feature, 1: enable, 2: Software Control + 0: Disable, 1: Enable, 2: Software Control +**/ + UINT8 EnableSgx; + +/** Offset 0x034D - Txt + Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable + $EN_DIS +**/ + UINT8 Txt; + +/** Offset 0x034E +**/ + UINT8 UnusedUpdSpace10[2]; + +/** Offset 0x0350 - PrmrrSize + Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable +**/ + UINT32 PrmrrSize; + +/** Offset 0x0354 - SinitMemorySize + Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable +**/ + UINT32 SinitMemorySize; + +/** Offset 0x0358 - TxtDprMemoryBase + Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable +**/ + UINT64 TxtDprMemoryBase; + +/** Offset 0x0360 - TxtHeapMemorySize + Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable +**/ + UINT32 TxtHeapMemorySize; + +/** Offset 0x0364 - TxtDprMemorySize + Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable +**/ + UINT32 TxtDprMemorySize; + +/** Offset 0x0368 - BiosAcmBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 BiosAcmBase; + +/** Offset 0x036C - BiosAcmSize + Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable +**/ + UINT32 BiosAcmSize; + +/** Offset 0x0370 - ApStartupBase + Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable +**/ + UINT32 ApStartupBase; + +/** Offset 0x0374 - TgaSize + Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable +**/ + UINT32 TgaSize; + +/** Offset 0x0378 - TxtLcpPdBase + Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable +**/ + UINT64 TxtLcpPdBase; + +/** Offset 0x0380 - TxtLcpPdSize + Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable +**/ + UINT64 TxtLcpPdSize; + +/** Offset 0x0388 - IsTPMPresence + IsTPMPresence default values +**/ + UINT8 IsTPMPresence; + +/** Offset 0x0389 - Configuration for boot TDP selection + Configuration for boot TDP selection; 0: TDP Nominal; 1: TDP Down; 2: TDP + Up;0xFF : Deactivate +**/ + UINT8 ConfigTdpLevel; + +/** Offset 0x038A - ReservedSecurityPreMem + Reserved for Security Pre-Mem + $EN_DIS +**/ + UINT8 ReservedSecurityPreMem[5]; + +/** Offset 0x038F - Enable PCH HSIO PCIE Rx Set Ctle + Enable PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtleEnable[24]; + +/** Offset 0x03A7 - PCH HSIO PCIE Rx Set Ctle Value + PCH PCIe Gen 3 Set CTLE Value. +**/ + UINT8 PchPcieHsioRxSetCtle[24]; + +/** Offset 0x03BF - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[24]; + +/** Offset 0x03D7 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen1DownscaleAmp[24]; + +/** Offset 0x03EF - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[24]; + +/** Offset 0x0407 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen2DownscaleAmp[24]; + +/** Offset 0x041F - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[24]; + +/** Offset 0x0437 - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value + PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchPcieHsioTxGen3DownscaleAmp[24]; + +/** Offset 0x044F - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen1DeEmphEnable[24]; + +/** Offset 0x0467 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value + PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen1DeEmph[24]; + +/** Offset 0x047F - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[24]; + +/** Offset 0x0497 - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph3p5[24]; + +/** Offset 0x04AF - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[24]; + +/** Offset 0x04C7 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value + PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. +**/ + UINT8 PchPcieHsioTxGen2DeEmph6p0[24]; + +/** Offset 0x04DF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; + +/** Offset 0x04E7 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen1EqBoostMag[8]; + +/** Offset 0x04EF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; + +/** Offset 0x04F7 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen2EqBoostMag[8]; + +/** Offset 0x04FF - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; + +/** Offset 0x0507 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value + PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. +**/ + UINT8 PchSataHsioRxGen3EqBoostMag[8]; + +/** Offset 0x050F - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; + +/** Offset 0x0517 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen1DownscaleAmp[8]; + +/** Offset 0x051F - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; + +/** Offset 0x0527 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen2DownscaleAmp[8]; + +/** Offset 0x052F - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; + +/** Offset 0x0537 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value + PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. +**/ + UINT8 PchSataHsioTxGen3DownscaleAmp[8]; + +/** Offset 0x053F - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen1DeEmphEnable[8]; + +/** Offset 0x0547 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen1DeEmph[8]; + +/** Offset 0x054F - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen2DeEmphEnable[8]; + +/** Offset 0x0557 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen2DeEmph[8]; + +/** Offset 0x055F - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override + 0: Disable; 1: Enable. +**/ + UINT8 PchSataHsioTxGen3DeEmphEnable[8]; + +/** Offset 0x0567 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting + PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. +**/ + UINT8 PchSataHsioTxGen3DeEmph[8]; + +/** Offset 0x056F - PCH LPC Enhanced Port 80 Decoding + Original LPC only decodes one byte of port 80h. + $EN_DIS +**/ + UINT8 PchLpcEnhancePort8xhDecoding; + +/** Offset 0x0570 - PCH Port80 Route + Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. + 0:LPC, 1:PCI +**/ + UINT8 PchPort80Route; + +/** Offset 0x0571 - Enable SMBus ARP support + Enable SMBus ARP support. + $EN_DIS +**/ + UINT8 SmbusArpEnable; + +/** Offset 0x0572 - Number of RsvdSmbusAddressTable. + The number of elements in the RsvdSmbusAddressTable. +**/ + UINT8 PchNumRsvdSmbusAddresses; + +/** Offset 0x0573 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x0574 - SMBUS Base Address + SMBUS Base Address (IO space). +**/ + UINT16 PchSmbusIoBase; + +/** Offset 0x0576 - Enable SMBus Alert Pin + Enable SMBus Alert Pin. + $EN_DIS +**/ + UINT8 PchSmbAlertEnable; + +/** Offset 0x0577 - Usage type for ClkSrc + 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use + (free running), 0xFF: not used +**/ + UINT8 PcieClkSrcUsage[16]; + +/** Offset 0x0587 - ClkReq-to-ClkSrc mapping + Number of ClkReq signal assigned to ClkSrc +**/ + UINT8 PcieClkSrcClkReq[16]; + +/** Offset 0x0597 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0598 - Point of RsvdSmbusAddressTable + Array of addresses reserved for non-ARP-capable SMBus devices. +**/ + UINT32 RsvdSmbusAddressTablePtr; + +/** Offset 0x059C - Enable PCIE RP Mask + Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 + for port1, bit1 for port2, and so on. +**/ + UINT32 PcieRpEnableMask; + +/** Offset 0x05A0 - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x05A1 - Serial Io Uart Debug Controller Number + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 SerialIoUartDebugControllerNumber; + +/** Offset 0x05A2 - Serial Io Uart Debug Auto Flow + Enables UART hardware flow control, CTS and RTS lines. + $EN_DIS +**/ + UINT8 SerialIoUartDebugAutoFlow; + +/** Offset 0x05A3 +**/ + UINT8 UnusedUpdSpace13; + +/** Offset 0x05A4 - Serial Io Uart Debug BaudRate + Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, + 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 +**/ + UINT32 SerialIoUartDebugBaudRate; + +/** Offset 0x05A8 - Serial Io Uart Debug Parity + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartDebugParity; + +/** Offset 0x05A9 - Serial Io Uart Debug Stop Bits + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 SerialIoUartDebugStopBits; + +/** Offset 0x05AA - Serial Io Uart Debug Data Bits + Set default word length. 0: Default, 5,6,7,8 + 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS +**/ + UINT8 SerialIoUartDebugDataBits; + +/** Offset 0x05AB +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x05AC - Serial Io Uart Debug Mmio Base + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 SerialIoUartDebugMmioBase; + +/** Offset 0x05B0 - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x05B1 - GT PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 GtPllVoltageOffset; + +/** Offset 0x05B2 - Ring PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 RingPllVoltageOffset; + +/** Offset 0x05B3 - System Agent PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 SaPllVoltageOffset; + +/** Offset 0x05B4 - Memory Controller PLL voltage offset + Core PLL voltage offset. 0: No offset. Range 0-63 +**/ + UINT8 McPllVoltageOffset; + +/** Offset 0x05B5 - MRC Safe Config + Enables/Disable MRC Safe Config + $EN_DIS +**/ + UINT8 MrcSafeConfig; + +/** Offset 0x05B6 - TCSS Thunderbolt PCIE Root Port 0 Enable + Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie0En; + +/** Offset 0x05B7 - TCSS Thunderbolt PCIE Root Port 1 Enable + Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie1En; + +/** Offset 0x05B8 - TCSS Thunderbolt PCIE Root Port 2 Enable + Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie2En; + +/** Offset 0x05B9 - TCSS Thunderbolt PCIE Root Port 3 Enable + Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssItbtPcie3En; + +/** Offset 0x05BA - TCSS USB HOST (xHCI) Enable + Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below + $EN_DIS +**/ + UINT8 TcssXhciEn; + +/** Offset 0x05BB - TCSS USB DEVICE (xDCI) Enable + Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled + $EN_DIS +**/ + UINT8 TcssXdciEn; + +/** Offset 0x05BC - TCSS DMA0 Enable + Set TCSS DMA0. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma0En; + +/** Offset 0x05BD - TCSS DMA1 Enable + Set TCSS DMA1. 0:Disabled 1:Enabled + $EN_DIS +**/ + UINT8 TcssDma1En; + +/** Offset 0x05BE - PcdSerialDebugBaudRate + Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. + 3:9600, 4:19200, 6:56700, 7:115200 +**/ + UINT8 PcdSerialDebugBaudRate; + +/** Offset 0x05BF - HobBufferSize + Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB + total HOB size). + 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value +**/ + UINT8 HobBufferSize; + +/** Offset 0x05C0 - Early Command Training + Enables/Disable Early Command Training + $EN_DIS +**/ + UINT8 ECT; + +/** Offset 0x05C1 - SenseAmp Offset Training + Enables/Disable SenseAmp Offset Training + $EN_DIS +**/ + UINT8 SOT; + +/** Offset 0x05C2 - Early ReadMPR Timing Centering 2D + Enables/Disable Early ReadMPR Timing Centering 2D + $EN_DIS +**/ + UINT8 ERDMPRTC2D; + +/** Offset 0x05C3 - Read MPR Training + Enables/Disable Read MPR Training + $EN_DIS +**/ + UINT8 RDMPRT; + +/** Offset 0x05C4 - Receive Enable Training + Enables/Disable Receive Enable Training + $EN_DIS +**/ + UINT8 RCVET; + +/** Offset 0x05C5 - Jedec Write Leveling + Enables/Disable Jedec Write Leveling + $EN_DIS +**/ + UINT8 JWRL; + +/** Offset 0x05C6 - Early Write Time Centering 2D + Enables/Disable Early Write Time Centering 2D + $EN_DIS +**/ + UINT8 EWRTC2D; + +/** Offset 0x05C7 - Early Read Time Centering 2D + Enables/Disable Early Read Time Centering 2D + $EN_DIS +**/ + UINT8 ERDTC2D; + +/** Offset 0x05C8 - Write Timing Centering 1D + Enables/Disable Write Timing Centering 1D + $EN_DIS +**/ + UINT8 WRTC1D; + +/** Offset 0x05C9 - Write Voltage Centering 1D + Enables/Disable Write Voltage Centering 1D + $EN_DIS +**/ + UINT8 WRVC1D; + +/** Offset 0x05CA - Read Timing Centering 1D + Enables/Disable Read Timing Centering 1D + $EN_DIS +**/ + UINT8 RDTC1D; + +/** Offset 0x05CB - Dimm ODT Training + Enables/Disable Dimm ODT Training + $EN_DIS +**/ + UINT8 DIMMODTT; + +/** Offset 0x05CC - DIMM RON Training + Enables/Disable DIMM RON Training + $EN_DIS +**/ + UINT8 DIMMRONT; + +/** Offset 0x05CD - Write Drive Strength/Equalization 2D + Enables/Disable Write Drive Strength/Equalization 2D + $EN_DIS +**/ + UINT8 WRDSEQT; + +/** Offset 0x05CE - Write Slew Rate Training + Enables/Disable Write Slew Rate Training + $EN_DIS +**/ + UINT8 WRSRT; + +/** Offset 0x05CF - Read ODT Training + Enables/Disable Read ODT Training + $EN_DIS +**/ + UINT8 RDODTT; + +/** Offset 0x05D0 - Read Equalization Training + Enables/Disable Read Equalization Training + $EN_DIS +**/ + UINT8 RDEQT; + +/** Offset 0x05D1 - Read Amplifier Training + Enables/Disable Read Amplifier Training + $EN_DIS +**/ + UINT8 RDAPT; + +/** Offset 0x05D2 - Write Timing Centering 2D + Enables/Disable Write Timing Centering 2D + $EN_DIS +**/ + UINT8 WRTC2D; + +/** Offset 0x05D3 - Read Timing Centering 2D + Enables/Disable Read Timing Centering 2D + $EN_DIS +**/ + UINT8 RDTC2D; + +/** Offset 0x05D4 - Write Voltage Centering 2D + Enables/Disable Write Voltage Centering 2D + $EN_DIS +**/ + UINT8 WRVC2D; + +/** Offset 0x05D5 - Read Voltage Centering 2D + Enables/Disable Read Voltage Centering 2D + $EN_DIS +**/ + UINT8 RDVC2D; + +/** Offset 0x05D6 - Command Voltage Centering + Enables/Disable Command Voltage Centering + $EN_DIS +**/ + UINT8 CMDVC; + +/** Offset 0x05D7 - Late Command Training + Enables/Disable Late Command Training + $EN_DIS +**/ + UINT8 LCT; + +/** Offset 0x05D8 - Round Trip Latency Training + Enables/Disable Round Trip Latency Training + $EN_DIS +**/ + UINT8 RTL; + +/** Offset 0x05D9 - Turn Around Timing Training + Enables/Disable Turn Around Timing Training + $EN_DIS +**/ + UINT8 TAT; + +/** Offset 0x05DA - Memory Test + Enables/Disable Memory Test + $EN_DIS +**/ + UINT8 MEMTST; + +/** Offset 0x05DB - DIMM SPD Alias Test + Enables/Disable DIMM SPD Alias Test + $EN_DIS +**/ + UINT8 ALIASCHK; + +/** Offset 0x05DC - Receive Enable Centering 1D + Enables/Disable Receive Enable Centering 1D + $EN_DIS +**/ + UINT8 RCVENC1D; + +/** Offset 0x05DD - Retrain Margin Check + Enables/Disable Retrain Margin Check + $EN_DIS +**/ + UINT8 RMC; + +/** Offset 0x05DE - Write Drive Strength Up/Dn independently + Enables/Disable Write Drive Strength Up/Dn independently + $EN_DIS +**/ + UINT8 WRDSUDT; + +/** Offset 0x05DF - ECC Support + Enables/Disable ECC Support + $EN_DIS +**/ + UINT8 EccSupport; + +/** Offset 0x05E0 - Ibecc + In-Band ECC Support + $EN_DIS +**/ + UINT8 Ibecc; + +/** Offset 0x05E1 - IbeccParity + In-Band ECC Parity Control + $EN_DIS +**/ + UINT8 IbeccParity; + +/** Offset 0x05E2 - IbeccOperationMode + In-Band ECC Operation Mode + 0:Protect base on address range, 1: Non-protected, 2: All protected +**/ + UINT8 IbeccOperationMode; + +/** Offset 0x05E3 - IbeccProtectedRegionEnable + In-Band ECC Protected Region Enable + $EN_DIS +**/ + UINT8 IbeccProtectedRegionEnable[8]; + +/** Offset 0x05EB +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x05EC - IbeccProtectedRegionBases + IBECC Protected Region Bases +**/ + UINT16 IbeccProtectedRegionBase[8]; + +/** Offset 0x05FC - IbeccProtectedRegionMasks + IBECC Protected Region Masks +**/ + UINT16 IbeccProtectedRegionMask[8]; + +/** Offset 0x060C - Memory Remap + Enables/Disable Memory Remap + $EN_DIS +**/ + UINT8 RemapEnable; + +/** Offset 0x060D - Rank Interleave support + Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at + the same time. + $EN_DIS +**/ + UINT8 RankInterleave; + +/** Offset 0x060E - Enhanced Interleave support + Enables/Disable Enhanced Interleave support + $EN_DIS +**/ + UINT8 EnhancedInterleave; + +/** Offset 0x060F - Ch Hash Support + Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode + $EN_DIS +**/ + UINT8 ChHashEnable; + +/** Offset 0x0610 - Extern Therm Status + Enables/Disable Extern Therm Status + $EN_DIS +**/ + UINT8 EnableExtts; + +/** Offset 0x0611 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDn; + +/** Offset 0x0612 - DDR PowerDown and idle counter + Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) + $EN_DIS +**/ + UINT8 EnablePwrDnLpddr; + +/** Offset 0x0613 - SelfRefresh Enable + Enables/Disable SelfRefresh Enable + $EN_DIS +**/ + UINT8 SrefCfgEna; + +/** Offset 0x0614 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeatLpddr; + +/** Offset 0x0615 - Throttler CKEMin Defeature + Enables/Disable Throttler CKEMin Defeature + $EN_DIS +**/ + UINT8 ThrtCkeMinDefeat; + +/** Offset 0x0616 - Enable RH Prevention + Enables/Disable RH Prevention + $EN_DIS +**/ + UINT8 RhPrevention; + +/** Offset 0x0617 - Exit On Failure (MRC) + Enables/Disable Exit On Failure (MRC) + $EN_DIS +**/ + UINT8 ExitOnFailure; + +/** Offset 0x0618 - New Features 1 - MRC + New Feature Enabling 1, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable1; + +/** Offset 0x0619 - New Features 2 - MRC + New Feature Enabling 2, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 NewFeatureEnable2; + +/** Offset 0x061A - Duty Cycle Correction Training + Enable/Disable Duty Cycle Correction Training + $EN_DIS +**/ + UINT8 DCC; + +/** Offset 0x061B - Read Voltage Centering 1D + Enable/Disable Read Voltage Centering 1D + $EN_DIS +**/ + UINT8 RDVC1D; + +/** Offset 0x061C - TxDqTCO Comp Training + Enable/Disable TxDqTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCO; + +/** Offset 0x061D - ClkTCO Comp Training + Enable/Disable ClkTCO Comp Training + $EN_DIS +**/ + UINT8 CLKTCO; + +/** Offset 0x061E - CMD Slew Rate Training + Enable/Disable CMD Slew Rate Training + $EN_DIS +**/ + UINT8 CMDSR; + +/** Offset 0x061F - CMD Drive Strength and Tx Equalization + Enable/Disable CMD Drive Strength and Tx Equalization + $EN_DIS +**/ + UINT8 CMDDSEQ; + +/** Offset 0x0620 - DIMM CA ODT Training + Enable/Disable DIMM CA ODT Training + $EN_DIS +**/ + UINT8 DIMMODTCA; + +/** Offset 0x0621 - TxDqsTCO Comp Training + Enable/Disable TxDqsTCO Comp Training + $EN_DIS +**/ + UINT8 TXTCODQS; + +/** Offset 0x0622 - CMD/CTL Drive Strength Up/Dn 2D + Enable/Disable CMD/CTL Drive Strength Up/Dn 2D + $EN_DIS +**/ + UINT8 CMDDRUD; + +/** Offset 0x0623 - VccDLL Bypass Training + Enable/Disable VccDLL Bypass Training + $EN_DIS +**/ + UINT8 VCCDLLBP; + +/** Offset 0x0624 - PanicVttDnLp Training + Enable/Disable PanicVttDnLp Training + $EN_DIS +**/ + UINT8 PVTTDNLP; + +/** Offset 0x0625 - Read Vref Decap Training* + Enable/Disable Read Vref Decap Training* + $EN_DIS +**/ + UINT8 RDVREFDC; + +/** Offset 0x0626 - Vddq Training + Enable/Disable Vddq Training + $EN_DIS +**/ + UINT8 VDDQT; + +/** Offset 0x0627 - Rank Margin Tool Per Bit + Enable/Disable Rank Margin Tool Per Bit + $EN_DIS +**/ + UINT8 RMTBIT; + +/** Offset 0x0628 +**/ + UINT8 Reserved2[2]; + +/** Offset 0x062A - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedClock; + +/** Offset 0x062B - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP + $EN_DIS +**/ + UINT8 Ddr4DdpSharedZq; + +/** Offset 0x062C - Ch Hash Interleaved Bit + Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave + the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 + 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 +**/ + UINT8 ChHashInterleaveBit; + +/** Offset 0x062D +**/ + UINT8 UnusedUpdSpace16; + +/** Offset 0x062E - Ch Hash Mask + Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to + BITS [19:6] Default is 0x0830 +**/ + UINT16 ChHashMask; + +/** Offset 0x0630 - Base reference clock value + Base reference clock value, in Hertz(Default is 100Hz) + 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz +**/ + UINT32 BClkFrequency; + +/** Offset 0x0634 - EPG DIMM Idd3N + Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on + a per DIMM basis. Default is 26 +**/ + UINT16 Idd3n; + +/** Offset 0x0636 - EPG DIMM Idd3P + Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated + on a per DIMM basis. Default is 11 +**/ + UINT16 Idd3p; + +/** Offset 0x0638 - RH Activation Probability + RH Activation Probability, Probability value is 1/2^(inputvalue) +**/ + UINT8 RhActProbability; + +/** Offset 0x0639 - Idle Energy Mc0Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm0; + +/** Offset 0x063A - Idle Energy Mc0Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch0Dimm1; + +/** Offset 0x063B - Idle Energy Mc0Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm0; + +/** Offset 0x063C - Idle Energy Mc0Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc0Ch1Dimm1; + +/** Offset 0x063D - Idle Energy Mc1Ch0Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm0; + +/** Offset 0x063E - Idle Energy Mc1Ch0Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch0Dimm1; + +/** Offset 0x063F - Idle Energy Mc1Ch1Dimm0 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm0; + +/** Offset 0x0640 - Idle Energy Mc1Ch1Dimm1 + Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) +**/ + UINT8 IdleEnergyMc1Ch1Dimm1; + +/** Offset 0x0641 - PowerDown Energy Mc0Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm0; + +/** Offset 0x0642 - PowerDown Energy Mc0Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch0Dimm1; + +/** Offset 0x0643 - PowerDown Energy Mc0Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm0; + +/** Offset 0x0644 - PowerDown Energy Mc0Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc0Ch1Dimm1; + +/** Offset 0x0645 - PowerDown Energy Mc1Ch0Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm0; + +/** Offset 0x0646 - PowerDown Energy Mc1Ch0Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch0Dimm1; + +/** Offset 0x0647 - PowerDown Energy Mc1Ch1Dimm0 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm0; + +/** Offset 0x0648 - PowerDown Energy Mc1Ch1Dimm1 + PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) +**/ + UINT8 PdEnergyMc1Ch1Dimm1; + +/** Offset 0x0649 - Activate Energy Mc0Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm0; + +/** Offset 0x064A - Activate Energy Mc0Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch0Dimm1; + +/** Offset 0x064B - Activate Energy Mc0Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm0; + +/** Offset 0x064C - Activate Energy Mc0Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc0Ch1Dimm1; + +/** Offset 0x064D - Activate Energy Mc1Ch0Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm0; + +/** Offset 0x064E - Activate Energy Mc1Ch0Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch0Dimm1; + +/** Offset 0x064F - Activate Energy Mc1Ch1Dimm0 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm0; + +/** Offset 0x0650 - Activate Energy Mc1Ch1Dimm1 + Activate Energy Contribution, range[255;0],(172= Def) +**/ + UINT8 ActEnergyMc1Ch1Dimm1; + +/** Offset 0x0651 - Read Energy Mc0Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm0; + +/** Offset 0x0652 - Read Energy Mc0Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch0Dimm1; + +/** Offset 0x0653 - Read Energy Mc0Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm0; + +/** Offset 0x0654 - Read Energy Mc0Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc0Ch1Dimm1; + +/** Offset 0x0655 - Read Energy Mc1Ch0Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm0; + +/** Offset 0x0656 - Read Energy Mc1Ch0Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch0Dimm1; + +/** Offset 0x0657 - Read Energy Mc1Ch1Dimm0 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm0; + +/** Offset 0x0658 - Read Energy Mc1Ch1Dimm1 + Read Energy Contribution, range[255;0],(212= Def) +**/ + UINT8 RdEnergyMc1Ch1Dimm1; + +/** Offset 0x0659 - Write Energy Mc0Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm0; + +/** Offset 0x065A - Write Energy Mc0Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch0Dimm1; + +/** Offset 0x065B - Write Energy Mc0Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm0; + +/** Offset 0x065C - Write Energy Mc0Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc0Ch1Dimm1; + +/** Offset 0x065D - Write Energy Mc1Ch0Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm0; + +/** Offset 0x065E - Write Energy Mc1Ch0Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch0Dimm1; + +/** Offset 0x065F - Write Energy Mc1Ch1Dimm0 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm0; + +/** Offset 0x0660 - Write Energy Mc1Ch1Dimm1 + Write Energy Contribution, range[255;0],(221= Def) +**/ + UINT8 WrEnergyMc1Ch1Dimm1; + +/** Offset 0x0661 - Throttler CKEMin Timer + Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). + Dfault is 0x00 +**/ + UINT8 ThrtCkeMinTmr; + +/** Offset 0x0662 - Rapl Power Floor Ch0 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh0; + +/** Offset 0x0663 - Rapl Power Floor Ch1 + Power budget ,range[255;0],(0= 5.3W Def) +**/ + UINT8 RaplPwrFlCh1; + +/** Offset 0x0664 - Command Rate Support + CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs + 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS +**/ + UINT8 EnCmdRate; + +/** Offset 0x0665 - REFRESH_2X_MODE + 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot + 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only +**/ + UINT8 Refresh2X; + +/** Offset 0x0666 - Energy Performance Gain + Enable/disable(default) Energy Performance Gain. + $EN_DIS +**/ + UINT8 EpgEnable; + +/** Offset 0x0667 - Row Hammer Solution + Type of method used to prevent Row Hammer. Default is Hardware RHP + 0:Hardware RHP, 1:2x Refresh +**/ + UINT8 RhSolution; + +/** Offset 0x0668 - User Manual Threshold + Disabled: Predefined threshold will be used.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserThresholdEnable; + +/** Offset 0x0669 - User Manual Budget + Disabled: Configuration of memories will defined the Budget value.\n + Enabled: User Input will be used. + $EN_DIS +**/ + UINT8 UserBudgetEnable; + +/** Offset 0x066A - Power Down Mode + This option controls command bus tristating during idle periods + 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto +**/ + UINT8 PowerDownMode; + +/** Offset 0x066B - Pwr Down Idle Timer + The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means + AUTO: 64 for ULX/ULT, 128 for DT/Halo +**/ + UINT8 PwdwnIdleCounter; + +/** Offset 0x066C - Page Close Idle Timeout + This option controls Page Close Idle Timeout + 0:Enabled, 1:Disabled +**/ + UINT8 DisPgCloseIdleTimeout; + +/** Offset 0x066D - Bitmask of ranks that have CA bus terminated + Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. 0x01=Default, + Rank0 is terminating and Rank1 is non-terminating +**/ + UINT8 CmdRanksTerminated; + +/** Offset 0x066E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x066F - Fivr Faults + Fivr Faults; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrFaults; + +/** Offset 0x0670 - Fivr Efficiency + Fivr Efficiency Management; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 FivrEfficiency; + +/** Offset 0x0671 - Safe Mode Support + This option configures the varous items in the IO and MC to be more conservative.(def=Disable) + $EN_DIS +**/ + UINT8 SafeMode; + +/** Offset 0x0672 - Ask MRC to clear memory content + Ask MRC to clear memory content 0: Do not Clear Memory; 1: Clear Memory. + $EN_DIS +**/ + UINT8 CleanMemory; + +/** Offset 0x0673 - LpDdrDqDqsReTraining + Enables/Disable LpDdrDqDqsReTraining + $EN_DIS +**/ + UINT8 LpDdrDqDqsReTraining; + +/** Offset 0x0674 - TCSS USB Port Enable + Bitmap for per port enabling +**/ + UINT8 UsbTcPortEnPreMem; + +/** Offset 0x0675 +**/ + UINT8 UnusedUpdSpace17; + +/** Offset 0x0676 - Post Code Output Port + This option configures Post Code Output Port +**/ + UINT16 PostCodeOutputPort; + +/** Offset 0x0678 - RMTLoopCount + Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO +**/ + UINT8 RMTLoopCount; + +/** Offset 0x0679 - Enable/Disable SA CRID + Enable: SA CRID, Disable (Default): SA CRID + $EN_DIS +**/ + UINT8 CridEnable; + +/** Offset 0x067A - WRC Feature + Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports + IO devices allocating onto the ring and into LLC. WRC is fused on by default. + $EN_DIS +**/ + UINT8 WrcFeatureEnable; + +/** Offset 0x067B +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x067C - BCLK RFI Frequency + Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz 0 - No + RFI Tuning. Range is 98Mhz-100Mhz. +**/ + UINT32 BclkRfiFreq[4]; + +/** Offset 0x068C - Size of PCIe IMR. + Size of PCIe IMR in megabytes +**/ + UINT16 PcieImrSize; + +/** Offset 0x068E - Enable PCIe IMR + 0: Disable(AUTO), 1: Enable + $EN_DIS +**/ + UINT8 PcieImrEnabled; + +/** Offset 0x068F - Enable PCIe IMR + 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select + the Root port location from PCH PCIe or SA PCIe + $EN_DIS +**/ + UINT8 PcieImrRpLocation; + +/** Offset 0x0690 - Root port number for IMR. + Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port + from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 +**/ + UINT8 PcieImrRpSelection; + +/** Offset 0x0691 - SerialDebugMrcLevel + MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose +**/ + UINT8 SerialDebugMrcLevel; + +/** Offset 0x0692 - Mem Boot Mode + 0: BOOT_MODE_1LM(Default), 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION + 0: BOOT_MODE_1LM, 1: BOOT_MODE_2LM, 2: BOOT_MODE_PROVISION +**/ + UINT8 MemBootMode; + +/** Offset 0x0693 - PCIe ASPM programming will happen in relation to the Oprom + This option is specifically needed for ASPM configuration in 2LM feature + 0:Disabled, 1:L0, 2:L1, 3:L0L1, 4:Auto +**/ + UINT8 Peg3Aspm; + +/** Offset 0x0694 - MFVC WRR VC Arbitration + 0: DEFAULT_PHASES(Default), 1: PROGRAM_128PHASES + 0: DEFAULT_PHASES, 1: PROGRAM_128PHASES +**/ + UINT8 MfvcWrrArb; + +/** Offset 0x0695 - BZM Support + 1: enable, 0: disable(Default), Enable/disable setting for Boot-time Zero Memory support + $EN_DIS +**/ + UINT8 BzmSupport; + +/** Offset 0x0696 - VcId_7_0 values + Select VC ID for arbitration +**/ + UINT8 VcId_7_0[16]; + +/** Offset 0x06A6 - Set Hw Parameters enable/disable + 1: enable, 0: disable, Enable/disable setting of HW parameters + $EN_DIS +**/ + UINT8 SetHwParameters; + +/** Offset 0x06A7 +**/ + UINT8 UnusedUpdSpace19; + +/** Offset 0x06A8 - LTR L1.2 Threshold Value + LTR L1.2 Threshold Value +**/ + UINT16 Ltr_L1D2_ThVal; + +/** Offset 0x06AA - LTR L1.2 Threshold Scale + LTR L1.2 Threshold Scale +**/ + UINT8 Ltr_L1D2_ThScale; + +/** Offset 0x06AB - system power state + system power state indicates the platform power state +**/ + UINT8 SysPwrState; + +/** Offset 0x06AC - Media Death Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Media Death Notification + $EN_DIS +**/ + UINT8 MediaDeathNotification; + +/** Offset 0x06AD - Health Log Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Health Log Notification + $EN_DIS +**/ + UINT8 HealthLogNotification; + +/** Offset 0x06AE - Temp crosses below TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses below TempThrottle Notification + $EN_DIS +**/ + UINT8 TempBelowThrottleNotification; + +/** Offset 0x06AF - Temp crosses above TempThrottle Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Temp crosses above TempThrottle Notification + $EN_DIS +**/ + UINT8 TempAboveThrottleNotification; + +/** Offset 0x06B0 - Missing Commit Bit Notification Enable/Disable + 1: enable, 0: disable, Enable/disable for Missing Commit Bit Notification + $EN_DIS +**/ + UINT8 MissingCommitBitNotification; + +/** Offset 0x06B1 - NVMeHoldDisableBit + 1: enable, 0: disable, Enable/disable for NVMeHoldDisableBit + $EN_DIS +**/ + UINT8 NVMeHoldDisableBit; + +/** Offset 0x06B2 - Ddr4OneDpc + DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, + or on both (default) + 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled +**/ + UINT8 Ddr4OneDpc; + +/** Offset 0x06B3 - Ch Hash Override POR settings + Enable/Disable Override Channel Hash Support POR values + $EN_DIS +**/ + UINT8 ChHashOverride; + +/** Offset 0x06B4 - PDA Enumeration + Enables/Disable PDA Enumeration + $EN_DIS +**/ + UINT8 PDA; + +/** Offset 0x06B5 - DPin Policy + Set DPin Policy. Internal Only:All display ports are for internal only. External + First:All display ports are for external only, if there is no External DP-In presence + presents then IOM will use all ports internal only + 0: Internal Only, 1: External First +**/ + UINT8 DpInExternalEn; + +/** Offset 0x06B6 - DPin External Ports Number + Total number of External Gfx DpIn Port present on Board. Currently hardware wise + max 0x04 DpIn port supported, however DpIn module can handle upto 0x08 DpIn ports +**/ + UINT8 NumberOfDpInPort; + +/** Offset 0x06B7 - DPin External Port Connect Map + Indicate which Dp-In port connection detected. Each BIT stand for one Dp-In port. +**/ + UINT8 DpInPortConnectMap; + +/** Offset 0x06B8 - Command Pins Mapping + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. +**/ + UINT8 Lp5CccConfig[4]; + +/** Offset 0x06BC - Command Pins Mirrored + BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller + 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. +**/ + UINT32 CmdMirror[1]; + +/** Offset 0x06C0 - CPU BCLK SSC Enable + Enable/Disable CPU BCLK Spread Spectrum. Default is Enabled. + $EN_DIS +**/ + UINT8 CpuBclkSpread; + +/** Offset 0x06C1 - McParity + CMI/MC Parity Control + $EN_DIS +**/ + UINT8 McParity; + +/** Offset 0x06C2 - Vddq Voltage Override + # is multiple of 1mV where 0 means Auto. +**/ + UINT16 VddqVoltageOverride; + +/** Offset 0x06C4 - Extended Bank Hashing + Eanble/Disable ExtendedBankHashing + $EN_DIS +**/ + UINT8 ExtendedBankHashing; + +/** Offset 0x06C5 - Skip external display device scanning + Enable: Do not scan for external display device, Disable (Default): Scan external + display devices + $EN_DIS +**/ + UINT8 SkipExtGfxScan; + +/** Offset 0x06C6 - Generate BIOS Data ACPI Table + Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it + $EN_DIS +**/ + UINT8 BdatEnable; + +/** Offset 0x06C7 - Detect External Graphics device for LegacyOpROM + Detect and report if external graphics device only support LegacyOpROM or not (to + support CSM auto-enable). Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 ScanExtGfxForLegacyOpRom; + +/** Offset 0x06C8 - Lock PCU Thermal Management registers + Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 + $EN_DIS +**/ + UINT8 LockPTMregs; + +/** Offset 0x06C9 - Rsvd + Disable(0x0)(Default): Normal Operation - RxCTLE adaptive behavior enabled, Enable(0x1): + Override RxCTLE - Disable RxCTLE adaptive behavior to keep the configured RxCTLE + peak values unmodified + $EN_DIS +**/ + UINT8 PegGen3Rsvd; + +/** Offset 0x06CA - Panel Power Enable + Control for enabling/disabling VDD force bit (Required only for early enabling of + eDP panel). 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 PanelPowerEnable; + +/** Offset 0x06CB - BdatTestType + Indicates the type of Memory Training data to populate into the BDAT ACPI table. + 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D +**/ + UINT8 BdatTestType; + +/** Offset 0x06CC - PMR Size + Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot +**/ + UINT32 DmaBufferSize; + +/** Offset 0x06D0 - VT-d/IOMMU Boot Policy + BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS +**/ + UINT8 PreBootDmaMask; + +/** Offset 0x06D1 - Enable/Disable DMI GEN3 Hardware Eq + Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0): Disable Hardware Eq, Enabled(0x1)(Default): + Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 DmiHweq; + +/** Offset 0x06D2 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass + CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0): Disable Phase 23 Bypass, Enabled(0x1)(Default): + Enable Phase 23 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase23Bypass; + +/** Offset 0x06D3 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass + CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0): Disable Phase 3 Bypass, Enabled(0x1)(Default): + Enable Phase 3 Bypass + $EN_DIS +**/ + UINT8 Gen3EqPhase3Bypass; + +/** Offset 0x06D4 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable + Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0): Disable Local + Transmitter Coefficient Override, Enabled(0x1)(Default): Enable Local Transmitter + Coefficient Override + $EN_DIS +**/ + UINT8 Gen3LtcoEnable; + +/** Offset 0x06D5 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable + Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0): Disable Remote + Transmitter Coefficient/Preset Override, Enabled(0x1)(Default): Enable Remote + Transmitter Coefficient/Preset Override + $EN_DIS +**/ + UINT8 Gen3RtcoRtpoEnable; + +/** Offset 0x06D6 - DMI Gen3 Transmitter Pre-Cursor Coefficient + Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, + 2 is default for each lane +**/ + UINT8 DmiGen3Ltcpre[8]; + +/** Offset 0x06DE - DMI Gen3 Transmitter Post-Cursor Coefficient + Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default + for each lane +**/ + UINT8 DmiGen3Ltcpo[8]; + +/** Offset 0x06E6 - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCm[8]; + +/** Offset 0x06EE - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuDmiHwEqGen3CoeffListCp[8]; + +/** Offset 0x06F6 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable + Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, + Manual(0x1): Enable DmiGen3DsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3DsPresetEnable; + +/** Offset 0x06F7 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3DsPortRxPreset[8]; + +/** Offset 0x06FF - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3DsPortTxPreset[8]; + +/** Offset 0x0707 - Program DMI GEN3 Extended number of VC + (DEPRECATED) +**/ + UINT8 DmiGen3MultiVC; + +/** Offset 0x0708 - Enable/Disable DMI GEN3 DmiGen3Vc1Control + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3Vc1Control; + +/** Offset 0x0709 - Enable/Disable DMI GEN3 DmiGen3VcMControl + (DEPRECATED) + $EN_DIS +**/ + UINT8 DmiGen3VcMControl; + +/** Offset 0x070A - DMI Secure Register Lock:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiSrl; + +/** Offset 0x070B - DMI Scramble Enable:{Combo + (DEPRECATED) + 0:Disable, 1:Enable +**/ + UINT8 DmiScramble; + +/** Offset 0x070C - DMI Max Payload Size:{Combo + (DEPRECATED) + 0:Auto, 1:128 TLP, 2:256 TLP +**/ + UINT8 DmiMaxPayload; + +/** Offset 0x070D - DPin Dynamic Switch Policy + Dynamic one-time switch from iGFx to dGFx after boot to OS + 0: Disble, 1: Enable +**/ + UINT8 DPinDynamicSwitch; + +/** Offset 0x070E - Delay before sending commn + Delay before sending dynamic one-time switch cmd to IOM, ACPI BIOS consumes this + value and proceed delay when _DSM is invoked: 0=Minimal, 5000=Maximum, default + is 0 second +**/ + UINT16 DPinDynamicSwitchDelay0; + +/** Offset 0x0710 - Delay before IOM de-assert HPD + Delay before IOM de-assert HPD, ACPI BIOS passes this value to IOM when sending + dynamic one-time switch command: 1000=Minimal, 5000=Maximum, default is 1000 = 1 second +**/ + UINT16 DPinDynamicSwitchDelay1; + +/** Offset 0x0712 - SaPreMemTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SaPreMemTestRsvd[28]; + +/** Offset 0x072E - TotalFlashSize + Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable +**/ + UINT16 TotalFlashSize; + +/** Offset 0x0730 - BiosSize + The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != + 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected + Range) so that a BIOS Update Script can be stored in the DPR. +**/ + UINT16 BiosSize; + +/** Offset 0x0732 - SecurityTestRsvd + Reserved for SA Pre-Mem Test + $EN_DIS +**/ + UINT8 SecurityTestRsvd[12]; + +/** Offset 0x073E - Smbus dynamic power gating + Disable or Enable Smbus dynamic power gating. + $EN_DIS +**/ + UINT8 SmbusDynamicPowerGating; + +/** Offset 0x073F - Disable and Lock Watch Dog Register + Set 1 to clear WDT status, then disable and lock WDT registers. + $EN_DIS +**/ + UINT8 WdtDisableAndLock; + +/** Offset 0x0740 - SMBUS SPD Write Disable + Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write + Disable bit. For security recommendations, SPD write disable bit must be set. + $EN_DIS +**/ + UINT8 SmbusSpdWriteDisable; + +/** Offset 0x0741 - VC Type + Virtual Channel Type Select: 0: VC0, 1: VC1. + 0: VC0, 1: VC1 +**/ + UINT8 PchHdaVcType; + +/** Offset 0x0742 - Universal Audio Architecture compliance for DSP enabled system + 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox + driver or SST driver supported). + $EN_DIS +**/ + UINT8 PchHdaDspUaaCompliance; + +/** Offset 0x0743 - Enable HD Audio Link + Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. + $EN_DIS +**/ + UINT8 PchHdaAudioLinkHdaEnable; + +/** Offset 0x0744 - Enable HDA SDI lanes + Enable/disable HDA SDI lanes. +**/ + UINT8 PchHdaSdiEnable[2]; + +/** Offset 0x0746 - HDA Power/Clock Gating (PGD/CGD) + Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: + FORCE_ENABLE, 2: FORCE_DISABLE. + 0: POR, 1: Force Enable, 2: Force Disable +**/ + UINT8 PchHdaTestPowerClockGating; + +/** Offset 0x0747 - Enable HD Audio DMIC_N Link + Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. +**/ + UINT8 PchHdaAudioLinkDmicEnable[2]; + +/** Offset 0x0749 +**/ + UINT8 UnusedUpdSpace20[3]; + +/** Offset 0x074C - DMIC ClkA Pin Muxing (N - DMIC number) + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKA_* +**/ + UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; + +/** Offset 0x0754 - DMIC ClkB Pin Muxing + Determines DMIC ClkA Pin muxing. See GPIO_*_MUXING_DMIC_CLKB_* +**/ + UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; + +/** Offset 0x075C - Enable HD Audio DSP + Enable/disable HD Audio DSP feature. + $EN_DIS +**/ + UINT8 PchHdaDspEnable; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace21[3]; + +/** Offset 0x0760 - DMIC Data Pin Muxing + Determines DMIC Data Pin muxing. See GPIO_*_MUXING_DMIC_DATA_* +**/ + UINT32 PchHdaAudioLinkDmicDataPinMux[2]; + +/** Offset 0x0768 - Enable HD Audio SSP0 Link + Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 +**/ + UINT8 PchHdaAudioLinkSspEnable[6]; + +/** Offset 0x076E - Enable HD Audio SoundWire#N Link + Enable/disable HD Audio SNDW#N link. Muxed with HDA. +**/ + UINT8 PchHdaAudioLinkSndwEnable[4]; + +/** Offset 0x0772 - iDisp-Link Frequency + iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. + 4: 96MHz, 3: 48MHz +**/ + UINT8 PchHdaIDispLinkFrequency; + +/** Offset 0x0773 - iDisp-Link T-mode + iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T + 0: 2T, 2: 4T, 3: 8T, 4: 16T +**/ + UINT8 PchHdaIDispLinkTmode; + +/** Offset 0x0774 - iDisplay Audio Codec disconnection + 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. + $EN_DIS +**/ + UINT8 PchHdaIDispCodecDisconnect; + +/** Offset 0x0775 - Force ME DID Init Status + Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set + ME DID init stat value + $EN_DIS +**/ + UINT8 DidInitStat; + +/** Offset 0x0776 - CPU Replaced Polling Disable + Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop + $EN_DIS +**/ + UINT8 DisableCpuReplacedPolling; + +/** Offset 0x0777 - ME DID Message + (DEPRECATED)Test, 0: disable, 1: enable, Enable/Disable ME DID Message (disable + will prevent the DID message from being sent) + $EN_DIS +**/ + UINT8 SendDidMsg; + +/** Offset 0x0778 - Check HECI message before send + Test, 0: disable, 1: enable, Enable/Disable message check. + $EN_DIS +**/ + UINT8 DisableMessageCheck; + +/** Offset 0x0779 - Skip MBP HOB + Test, 0: disable, 1: enable, Enable/Disable MOB HOB. + $EN_DIS +**/ + UINT8 SkipMbpHob; + +/** Offset 0x077A - HECI2 Interface Communication + Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. + $EN_DIS +**/ + UINT8 HeciCommunication2; + +/** Offset 0x077B - Enable KT device + Test, 0: disable, 1: enable, Enable or Disable KT device. + $EN_DIS +**/ + UINT8 KtDeviceEnable; + +/** Offset 0x077C - Hybrid Graphics GPIO information for PEG 1 + Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie1Rtd3Gpio[24]; + +/** Offset 0x07DC - Hybrid Graphics GPIO information for PEG 2 + Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie2Rtd3Gpio[24]; + +/** Offset 0x083C - Hybrid Graphics GPIO information for PEG 3 + Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs +**/ + UINT32 CpuPcie3Rtd3Gpio[24]; + +/** Offset 0x089C - Skip CPU replacement check + Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check + $EN_DIS +**/ + UINT8 SkipCpuReplacementCheck; + +/** Offset 0x089D - PCI Express Dekel Workaround + Select the 1 to 9 for Dekel registers endpoint programming: 1=Minimal, 9=Maximum, + default is 2 +**/ + UINT8 CpuPcieRpDekelSquelchWa; + +/** Offset 0x089E - Serial Io Uart Debug Mode + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartDebugMode; + +/** Offset 0x089F +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08A0 - SerialIoUartDebugRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugRxPinMux; + +/** Offset 0x08A4 - SerialIoUartDebugTxPinMux - FSPM + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 SerialIoUartDebugTxPinMux; + +/** Offset 0x08A8 - SerialIoUartDebugRtsPinMux - FSPM + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartDebugRtsPinMux; + +/** Offset 0x08AC - SerialIoUartDebugCtsPinMux - FSPM + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartDebugCtsPinMux; + +/** Offset 0x08B0 - Avx2 Voltage Guardband Scaling Factor + AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in + 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx2VoltageScaleFactor; + +/** Offset 0x08B1 - Avx512 Voltage Guardband Scaling Factor + AVX512 Voltage Guardband Scale factor applied to AVX512 workloads. Range is 0-200 + in 1/100 units, where a value of 125 would apply a 1.25 scale factor. +**/ + UINT8 Avx512VoltageScaleFactor; + +/** Offset 0x08B2 - Lane Used of CSI port + Lane Used of each CSI port + 1:x1, 2:x2, 3:x3, 4:x4, 8:x8 +**/ + UINT8 IpuLaneUsed[8]; + +/** Offset 0x08BA - Lane Used of CSI port + Speed of each CSI port + 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps +**/ + UINT8 CsiSpeed[8]; + +/** Offset 0x08C2 - DPmem Support + 1: enable, 0: disable(Default), Enable/disable setting for Dynamic Persistent Memory support + $EN_DIS +**/ + UINT8 DpmemSupport; + +/** Offset 0x08C3 - Core VF Point Offset Mode + Selects Core Voltage & Frequency Point Offset between Legacy and Selection modes; + 0: Legacy; 1: Selection. + 0:Legacy, 1:Selection +**/ + UINT8 CoreVfPointOffsetMode; + +/** Offset 0x08C4 - Core VF Point Offset + Array used to specifies the Offset Voltage applied to the each selected Core VF + Point. This voltage is specified in millivolts. +**/ + UINT16 CoreVfPointOffset[15]; + +/** Offset 0x08E2 - Core VF Point Offset Prefix + Sets the CoreVfPointOffset value as positive or negative for corresponding core + VF Point; 0: Positive ; 1: Negative. + 0:Positive, 1:Negative +**/ + UINT8 CoreVfPointOffsetPrefix[15]; + +/** Offset 0x08F1 - Core VF Point Ratio + Array for the each selected Core VF Point to display the ration. +**/ + UINT8 CoreVfPointRatio[15]; + +/** Offset 0x0900 - Core VF Point Count + Number of supported Core Voltage & Frequency Point Offset +**/ + UINT8 CoreVfPointCount; + +/** Offset 0x0901 - Enable CPU CrashLog GPRs dump + Enable or Disable CPU CrashLog GPRs dump; 0: Disable; 1: Enable; 2: Only + disable Smm GPRs dump + 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled +**/ + UINT8 CrashLogGprs; + +/** Offset 0x0902 +**/ + UINT8 UnusedUpdSpace23[2]; + +/** Offset 0x0904 - Bitmask of disable cores + Core mask is a bitwise indication of which core should be disabled. 0x00=Default; + Bit 0 - core 0, bit 7 - core 7. +**/ + UINT32 DisableCoreMask; + +/** Offset 0x0908 - REFRESH_PANIC_WM + Refresh Panic Watermark, range 1-8, Default is 8 +**/ + UINT8 RefreshPanicWm; + +/** Offset 0x0909 - REFRESH_HP_WM + Refresh High Priority Watermark, range 1-7, Default is 7 +**/ + UINT8 RefreshHpWm; + +/** Offset 0x090A - Support Unlimited ICCMAX + Support Unlimited ICCMAX more than maximum value 255.75A; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 UnlimitedIccMax; + +/** Offset 0x090B - Per Core Max Ratio override + Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new + favored core ratio to each Core. 0: Disable, 1: enable + $EN_DIS +**/ + UINT8 PerCoreRatioOverride; + +/** Offset 0x090C - Per Core Current Max Ratio + Array for the Per Core Max Ratio +**/ + UINT8 PerCoreRatio[10]; + +/** Offset 0x0916 - Margin Limit Check + Margin Limit Check. Choose level of margin check + 0:Disable, 1:L1, 2:L2, 3:Both +**/ + UINT8 MarginLimitCheck; + +/** Offset 0x0917 +**/ + UINT8 UnusedUpdSpace24; + +/** Offset 0x0918 - Margin Limit L2 + % of L1 check for margin limit check +**/ + UINT16 MarginLimitL2; + +/** Offset 0x091A - Iotg Pll SscEn + Enable or disable CPU SSC. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 IotgPllSscEn; + +/** Offset 0x091B - GPIO Override + Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings + before moved to FSP. Available configurations 0: Disable;1: Level 1 - skips GpioSetNativePadByFunction;Level + 2 - skips GpioSetNativePadByFunction and GpioSetPadMode +**/ + UINT8 GpioOverride; + +/** Offset 0x091C - Write0 enabling + Enable/Disable Write0 + $EN_DIS +**/ + UINT8 WRITE0; + +/** Offset 0x091D +**/ + UINT8 UnusedUpdSpace25[3]; + +/** Offset 0x0920 +**/ + UINT32 VccInVoltageOverride; + +/** Offset 0x0924 - Dynamic Memory Timings Changes + Dynamic Memory Timings Changes; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 DynamicMemoryChange; + +/** Offset 0x0925 - IbeccErrorInj + In-Band ECC Error Injection NOTE: For Debug or Development purposes only! Disable + this option for production systems. + $EN_DIS +**/ + UINT8 IbeccErrorInj; + +/** Offset 0x0926 - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable + Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, + Manual(0x1): Enable DmiGen3UsPresetEnable + $EN_DIS +**/ + UINT8 DmiGen3UsPresetEnable; + +/** Offset 0x0927 - DMI Gen3 Root port preset Rx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default + for each lane +**/ + UINT8 DmiGen3UsPortRxPreset[8]; + +/** Offset 0x092F - DMI Gen3 Root port preset Tx values per lane + Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default + for each lane +**/ + UINT8 DmiGen3UsPortTxPreset[8]; + +/** Offset 0x0937 - BCLK Frequency Source + Clock source of BCLK OC frequency, 0:CPU BCLK, 1:PCH BCLK, 2:External CLK + 0:CPU BCLK, 1:PCH BCLK, 2:External CLK +**/ + UINT8 BclkSource; + +/** Offset 0x0938 - CPU BCLK OC Frequency + CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz 0 + - Auto. Range is 8000-50000 (10KHz). +**/ + UINT32 CpuBclkOcFrequency; + +/** Offset 0x093C - Ring CCF Auto Gv Disable Down + Ring CCF Auto Gv Disable Down, 0: Disabled, 1:Fused default + 0:Disabled, 1:Fused default +**/ + UINT8 RingCcfAutoGvDisable; + +/** Offset 0x093D - SA/Uncore voltage mode + SA/Uncore voltage mode; 0: Adaptive; 1: Override. + $EN_DIS +**/ + UINT8 SaVoltageMode; + +/** Offset 0x093E - SA/Uncore Voltage Override + The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override + mode. Valid Range 0 to 2000 +**/ + UINT16 SaVoltageOverride; + +/** Offset 0x0940 - SA/Uncore Extra Turbo voltage + Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode. + Valid Range 0 to 2000 +**/ + UINT16 SaExtraTurboVoltage; + +/** Offset 0x0942 +**/ + UINT8 UnusedUpdSpace26[5]; + +/** Offset 0x0947 +**/ + UINT8 ReservedFspmUpd2[1]; +} FSP_M_CONFIG; + +/** Fsp M UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPM_ARCH_UPD FspmArchUpd; + +/** Offset 0x0040 +**/ + FSP_M_CONFIG FspmConfig; + +/** Offset 0x0948 +**/ + UINT8 UnusedUpdSpace27[6]; + +/** Offset 0x094E +**/ + UINT16 UpdTerminator; +} FSPM_UPD; + +#pragma pack() + +#endif diff --git a/models/lemp10/FSP/Include/FspsUpd.h b/models/lemp10/FSP/Include/FspsUpd.h new file mode 100644 index 0000000..7537647 --- /dev/null +++ b/models/lemp10/FSP/Include/FspsUpd.h @@ -0,0 +1,4201 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPSUPD_H__ +#define __FSPSUPD_H__ + +#include + +#pragma pack(1) + + +/// +/// Azalia Header structure +/// +typedef struct { + UINT16 VendorId; ///< Codec Vendor ID + UINT16 DeviceId; ///< Codec Device ID + UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. + UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. + UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. + UINT32 Reserved; ///< Reserved for future use. Must be set to 0. +} AZALIA_HEADER; + +/// +/// Audio Azalia Verb Table structure +/// +typedef struct { + AZALIA_HEADER Header; ///< AZALIA PCH header + UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header +} AUDIO_AZALIA_VERB_TABLE; + +/// +/// Refer to the definition of PCH_INT_PIN +/// +typedef enum { + SiPchNoInt, ///< No Interrupt Pin + SiPchIntA, + SiPchIntB, + SiPchIntC, + SiPchIntD +} SI_PCH_INT_PIN; +/// +/// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. +/// +typedef struct { + UINT8 Device; ///< Device number + UINT8 Function; ///< Device function + UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) + UINT8 Irq; ///< IRQ to be set for device. +} SI_PCH_DEVICE_INTERRUPT_CONFIG; + +#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices + + +/** Fsp S Configuration +**/ +typedef struct { + +/** Offset 0x0020 - Logo Pointer + Points to PEI Display Logo Image +**/ + UINT32 LogoPtr; + +/** Offset 0x0024 - Logo Size + Size of PEI Display Logo Image +**/ + UINT32 LogoSize; + +/** Offset 0x0028 - Blt Buffer Address + Address of Blt buffer +**/ + UINT32 BltBufferAddress; + +/** Offset 0x002C - Blt Buffer Size + Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of + EFI_GRAPHICS_OUTPUT_BLT_PIXEL) +**/ + UINT32 BltBufferSize; + +/** Offset 0x0030 - Graphics Configuration Ptr + Points to VBT +**/ + UINT32 GraphicsConfigPtr; + +/** Offset 0x0034 - Enable Device 4 + Enable/disable Device 4 + $EN_DIS +**/ + UINT8 Device4Enable; + +/** Offset 0x0035 - Show SPI controller + Enable/disable to show SPI controller. + $EN_DIS +**/ + UINT8 ShowSpiController; + +/** Offset 0x0036 +**/ + UINT8 UnusedUpdSpace0[2]; + +/** Offset 0x0038 - MicrocodeRegionBase + Memory Base of Microcode Updates +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x003C - MicrocodeRegionSize + Size of Microcode Updates +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0040 - Turbo Mode + Enable/Disable Turbo mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 TurboMode; + +/** Offset 0x0041 - Enable SATA SALP Support + Enable/disable SATA Aggressive Link Power Management. + $EN_DIS +**/ + UINT8 SataSalpSupport; + +/** Offset 0x0042 - Enable SATA ports + Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, + and so on. +**/ + UINT8 SataPortsEnable[8]; + +/** Offset 0x004A - Enable SATA DEVSLP Feature + Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each + port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlp[8]; + +/** Offset 0x0052 - Enable USB2 ports + Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb20Enable[16]; + +/** Offset 0x0062 - Enable USB3 ports + Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for + port1, and so on. +**/ + UINT8 PortUsb30Enable[10]; + +/** Offset 0x006C - Enable xDCI controller + Enable/disable to xDCI controller. + $EN_DIS +**/ + UINT8 XdciEnable; + +/** Offset 0x006D +**/ + UINT8 UnusedUpdSpace1[3]; + +/** Offset 0x0070 - Address of PCH_DEVICE_INTERRUPT_CONFIG table. + The address of the table of PCH_DEVICE_INTERRUPT_CONFIG. +**/ + UINT32 DevIntConfigPtr; + +/** Offset 0x0074 - Number of DevIntConfig Entry + Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr + must not be NULL. +**/ + UINT8 NumOfDevIntConfig; + +/** Offset 0x0075 - PIRQx to IRQx Map Config + PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for + PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy + 8259 PCI mode. +**/ + UINT8 PxRcConfig[8]; + +/** Offset 0x007D - Select GPIO IRQ Route + GPIO IRQ Select. The valid value is 14 or 15. +**/ + UINT8 GpioIrqRoute; + +/** Offset 0x007E - Select SciIrqSelect + SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only. +**/ + UINT8 SciIrqSelect; + +/** Offset 0x007F - Select TcoIrqSelect + TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23. +**/ + UINT8 TcoIrqSelect; + +/** Offset 0x0080 - Enable/Disable Tco IRQ + Enable/disable TCO IRQ + $EN_DIS +**/ + UINT8 TcoIrqEnable; + +/** Offset 0x0081 - PCH HDA Verb Table Entry Number + Number of Entries in Verb Table. +**/ + UINT8 PchHdaVerbTableEntryNum; + +/** Offset 0x0082 +**/ + UINT8 UnusedUpdSpace2[2]; + +/** Offset 0x0084 - PCH HDA Verb Table Pointer + Pointer to Array of pointers to Verb Table. +**/ + UINT32 PchHdaVerbTablePtr; + +/** Offset 0x0088 - PCH HDA Codec Sx Wake Capability + Capability to detect wake initiated by a codec in Sx +**/ + UINT8 PchHdaCodecSxWakeCapability; + +/** Offset 0x0089 - Enable SATA + Enable/disable SATA controller. + $EN_DIS +**/ + UINT8 SataEnable; + +/** Offset 0x008A - SATA Mode + Select SATA controller working mode. + 0:AHCI, 1:RAID +**/ + UINT8 SataMode; + +/** Offset 0x008B - SPIn Device Mode + Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available + modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden +**/ + UINT8 SerialIoSpiMode[7]; + +/** Offset 0x0092 - SPI Chip Select Polarity + Sets polarity for each chip Select. Available options: 0:SerialIoSpiCsActiveLow, + 1:SerialIoSpiCsActiveHigh +**/ + UINT8 SerialIoSpiCsPolarity[14]; + +/** Offset 0x00A0 - SPI Chip Select Enable + 0:Disabled, 1:Enabled. Enables GPIO for CS0 or CS1 if it is Enabled +**/ + UINT8 SerialIoSpiCsEnable[14]; + +/** Offset 0x00AE - SPIn Default Chip Select Output + Sets Default CS as Output. N represents controller index: SPI0, SPI1, ... Available + options: 0:CS0, 1:CS1 +**/ + UINT8 SerialIoSpiDefaultCsOutput[7]; + +/** Offset 0x00B5 - SPIn Default Chip Select Mode HW/SW + Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, + SPI1, ... Available options: 0:HW, 1:SW +**/ + UINT8 SerialIoSpiCsMode[7]; + +/** Offset 0x00BC - SPIn Default Chip Select State Low/High + Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... + Available options: 0:Low, 1:High +**/ + UINT8 SerialIoSpiCsState[7]; + +/** Offset 0x00C3 - UARTn Device Mode + Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available + modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 SerialIoUartMode[7]; + +/** Offset 0x00CA +**/ + UINT8 UnusedUpdSpace3[2]; + +/** Offset 0x00CC - Default BaudRate for each Serial IO UART + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 SerialIoUartBaudRate[7]; + +/** Offset 0x00E8 - Default ParityType for each Serial IO UART + Set default Parity. 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 SerialIoUartParity[7]; + +/** Offset 0x00EF - Default DataBits for each Serial IO UART + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 SerialIoUartDataBits[7]; + +/** Offset 0x00F6 - Default StopBits for each Serial IO UART + Set default stop bits. 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: + TwoStopBits +**/ + UINT8 SerialIoUartStopBits[7]; + +/** Offset 0x00FD - Power Gating mode for each Serial IO UART that works in COM mode + Set Power Gating. 0: Disabled, 1: Enabled, 2: Auto +**/ + UINT8 SerialIoUartPowerGating[7]; + +/** Offset 0x0104 - Enable Dma for each Serial IO UART that supports it + Set DMA/PIO mode. 0: Disabled, 1: Enabled +**/ + UINT8 SerialIoUartDmaEnable[7]; + +/** Offset 0x010B - Enables UART hardware flow control, CTS and RTS lines + Enables UART hardware flow control, CTS and RTS lines. +**/ + UINT8 SerialIoUartAutoFlow[7]; + +/** Offset 0x0112 +**/ + UINT8 UnusedUpdSpace4[2]; + +/** Offset 0x0114 - SerialIoUartRtsPinMuxPolicy + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 SerialIoUartRtsPinMuxPolicy[7]; + +/** Offset 0x0130 - SerialIoUartCtsPinMuxPolicy + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 SerialIoUartCtsPinMuxPolicy[7]; + +/** Offset 0x014C - SerialIoUartRxPinMuxPolicy + Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for + possible values. +**/ + UINT32 SerialIoUartRxPinMuxPolicy[7]; + +/** Offset 0x0168 - SerialIoUartTxPinMuxPolicy + Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for + possible values. +**/ + UINT32 SerialIoUartTxPinMuxPolicy[7]; + +/** Offset 0x0184 - UART Number For Debug Purpose + UART number for debug purpose. 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, + 6:UART6. Note: If UART0 is selected as CNVi BT Core interface, it cannot be used + for debug purpose. + 0:UART0, 1:UART1, 2:UART2, 3:UART3, 4:UART4, 5:UART5, 6:UART6 +**/ + UINT8 SerialIoDebugUartNumber; + +/** Offset 0x0185 - Serial IO UART DBG2 table + Enable or disable Serial Io UART DBG2 table, default is Disable; 0: Disable; + 1: Enable. +**/ + UINT8 SerialIoUartDbg2[7]; + +/** Offset 0x018C - I2Cn Device Mode + Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available + modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden +**/ + UINT8 SerialIoI2cMode[8]; + +/** Offset 0x0194 - Serial IO I2C SDA Pin Muxing + Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for + possible values. +**/ + UINT32 PchSerialIoI2cSdaPinMux[8]; + +/** Offset 0x01B4 - Serial IO I2C SCL Pin Muxing + Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for + possible values. +**/ + UINT32 PchSerialIoI2cSclPinMux[8]; + +/** Offset 0x01D4 - PCH SerialIo I2C Pads Termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,... pads termination + respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1, and so on. +**/ + UINT8 PchSerialIoI2cPadsTermination[8]; + +/** Offset 0x01DC - ISH GP GPIO Pin Muxing + Determines ISH GP GPIO Pin muxing. See GPIO_*_MUXING_ISH_GP_x_GPIO_*. 'x' are GP_NUMBER +**/ + UINT32 IshGpGpioPinMuxing[8]; + +/** Offset 0x01FC - ISH UART Rx Pin Muxing + Determines ISH UART Rx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_TXD_* +**/ + UINT32 IshUartRxPinMuxing[3]; + +/** Offset 0x0208 - ISH UART Tx Pin Muxing + Determines ISH UART Tx Pin muxing. See GPIO_*_MUXING_ISH_UARTx_RXD_* +**/ + UINT32 IshUartTxPinMuxing[3]; + +/** Offset 0x0214 - ISH UART Rts Pin Muxing + Select ISH UART Rts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_RTS_* for possible values. +**/ + UINT32 IshUartRtsPinMuxing[3]; + +/** Offset 0x0220 - ISH UART Rts Pin Muxing + Select ISH UART Cts Pin muxing. Refer to GPIO_*_MUXING_ISH_UARTx_CTS_* for possible values. +**/ + UINT32 IshUartCtsPinMuxing[3]; + +/** Offset 0x022C - ISH I2C SDA Pin Muxing + Select ISH I2C SDA Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SDA_* for possible values. +**/ + UINT32 IshI2cSdaPinMuxing[3]; + +/** Offset 0x0238 - ISH I2C SCL Pin Muxing + Select ISH I2C SCL Pin muxing. Refer to GPIO_*_MUXING_ISH_I2Cx_SCL_* for possible values. +**/ + UINT32 IshI2cSclPinMuxing[3]; + +/** Offset 0x0244 - ISH SPI MOSI Pin Muxing + Select ISH SPI MOSI Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MOSI_* for possible values. +**/ + UINT32 IshSpiMosiPinMuxing[2]; + +/** Offset 0x024C - ISH SPI MISO Pin Muxing + Select ISH SPI MISO Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_MISO_* for possible values. +**/ + UINT32 IshSpiMisoPinMuxing[2]; + +/** Offset 0x0254 - ISH SPI CLK Pin Muxing + Select ISH SPI CLK Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CLK_* for possible values. +**/ + UINT32 IshSpiClkPinMuxing[2]; + +/** Offset 0x025C - ISH SPI CS#N Pin Muxing + Select ISH SPI CS#N Pin muxing. Refer to GPIO_*_MUXING_ISH_SPIx_CS_* for possible + values. N-SPI number, 0-1. +**/ + UINT32 IshSpiCsPinMuxing[4]; + +/** Offset 0x026C - ISH GP GPIO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo GP#N GPIO pads termination + respectively. #N are GP_NUMBER, not strictly relate to indexes of this table. Index + 0-23 -> ISH_GP_0-23, Index 24-25 -> ISH_GP_30-31 +**/ + UINT8 IshGpGpioPadTermination[8]; + +/** Offset 0x0274 - ISH UART Rx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rx, byte1 for UART1 + Rx, and so on. +**/ + UINT8 IshUartRxPadTermination[3]; + +/** Offset 0x0277 - ISH UART Tx Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Tx pads termination + respectively. #N-byte for each controller, byte0 for UART0 Tx, byte1 for UART1 + Tx, and so on. +**/ + UINT8 IshUartTxPadTermination[3]; + +/** Offset 0x027A - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Rts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Rts, byte1 for UART1 + Rts, and so on. +**/ + UINT8 IshUartRtsPadTermination[3]; + +/** Offset 0x027D - ISH UART Rts Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo UART#N Cts pads termination + respectively. #N-byte for each controller, byte0 for UART0 Cts, byte1 for UART1 + Cts, and so on. +**/ + UINT8 IshUartCtsPadTermination[3]; + +/** Offset 0x0280 - ISH I2C SDA Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Sda pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Sda, byte1 for I2C1 Sda, + and so on. +**/ + UINT8 IshI2cSdaPadTermination[3]; + +/** Offset 0x0283 - ISH I2C SCL Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C#N Scl pads termination + respectively. #N-byte for each controller, byte0 for I2C0 Scl, byte1 for I2C1 Scl, + and so on. +**/ + UINT8 IshI2cSclPadTermination[3]; + +/** Offset 0x0286 - ISH SPI MOSI Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Mosi pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Mosi, byte1 for SPI1 + Mosi, and so on. +**/ + UINT8 IshSpiMosiPadTermination[2]; + +/** Offset 0x0288 - ISH SPI MISO Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Miso pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Miso, byte1 for SPI1 + Miso, and so on. +**/ + UINT8 IshSpiMisoPadTermination[2]; + +/** Offset 0x028A - ISH SPI CLK Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Clk pads termination + respectively. #N-byte for each controller, byte0 for SPI0 Clk, byte1 for SPI1 Clk, + and so on. +**/ + UINT8 IshSpiClkPadTermination[2]; + +/** Offset 0x028C - ISH SPI CS#N Pad termination + 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up, + 0x19: 20kOhm weak pull-up - Enable/disable SerialIo SPI#N Cs#M pads termination + respectively. N*M-byte for each controller, byte0 for SPI0 Cs0, byte1 for SPI1 + Cs1, SPI1 Cs0, byte2, SPI1 Cs1, byte3 +**/ + UINT8 IshSpiCsPadTermination[4]; + +/** Offset 0x0290 - Enable PCH ISH SPI Cs#N pins assigned + Set if ISH SPI Cs#N pins are to be enabled by BIOS. 0: Disable; 1: Enable. N-Cs + number: 0-1 +**/ + UINT8 PchIshSpiCsEnable[4]; + +/** Offset 0x0294 - USB Per Port HS Preemphasis Bias + USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. +**/ + UINT8 Usb2PhyPetxiset[16]; + +/** Offset 0x02A4 - USB Per Port HS Transmitter Bias + USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, + 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. +**/ + UINT8 Usb2PhyTxiset[16]; + +/** Offset 0x02B4 - USB Per Port HS Transmitter Emphasis + USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, + 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. +**/ + UINT8 Usb2PhyPredeemp[16]; + +/** Offset 0x02C4 - USB Per Port Half Bit Pre-emphasis + USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. + One byte for each port. +**/ + UINT8 Usb2PhyPehalfbit[16]; + +/** Offset 0x02D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment + Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmphEnable[10]; + +/** Offset 0x02DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting + USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], + Default = 29h (approximately -3.5dB De-Emphasis). One byte for each port. +**/ + UINT8 Usb3HsioTxDeEmph[10]; + +/** Offset 0x02E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment + Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value + in arrary can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmpEnable[10]; + +/** Offset 0x02F2 - USB 3.0 TX Output Downscale Amplitude Adjustment + USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], Default + = 00h. One byte for each port. +**/ + UINT8 Usb3HsioTxDownscaleAmp[10]; + +/** Offset 0x02FC +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfgEnable[10]; + +/** Offset 0x0306 +**/ + UINT8 PchUsb3HsioFilterSelNEnable[10]; + +/** Offset 0x0310 +**/ + UINT8 PchUsb3HsioFilterSelPEnable[10]; + +/** Offset 0x031A +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnResEnable[10]; + +/** Offset 0x0324 +**/ + UINT8 PchUsb3HsioCtrlAdaptOffsetCfg[10]; + +/** Offset 0x032E +**/ + UINT8 PchUsb3HsioOlfpsCfgPullUpDwnRes[10]; + +/** Offset 0x0338 +**/ + UINT8 PchUsb3HsioFilterSelN[10]; + +/** Offset 0x0342 +**/ + UINT8 PchUsb3HsioFilterSelP[10]; + +/** Offset 0x034C - Enable LAN + Enable/disable LAN controller. + $EN_DIS +**/ + UINT8 PchLanEnable; + +/** Offset 0x034D - Enable PCH TSN + Enable/disable TSN on the PCH. + $EN_DIS +**/ + UINT8 PchTsnEnable; + +/** Offset 0x034E - TSN Link Speed + Set TSN Link Speed. + 0: 24Mhz 2.5Gbps, 1: 24Mhz 1Gbps, 2: 38.4Mhz 2.5Gbps, 3: 38.4Mhz 1Gbps +**/ + UINT8 PchTsnLinkSpeed; + +/** Offset 0x034F +**/ + UINT8 UnusedUpdSpace5; + +/** Offset 0x0350 - PCH TSN0 MAC Address High Bits + Set TSN0 MAC Address High. +**/ + UINT32 PchTsn0MacAddressHigh; + +/** Offset 0x0354 - PCH TSN0 MAC Address Low Bits + Set TSN0 MAC Address Low. +**/ + UINT32 PchTsn0MacAddressLow; + +/** Offset 0x0358 - PCIe PTM enable/disable + Enable/disable Precision Time Measurement for PCIE Root Ports. +**/ + UINT8 PciePtm[24]; + +/** Offset 0x0370 - PCIe DPC enable/disable + Enable/disable Downstream Port Containment for PCIE Root Ports. +**/ + UINT8 PcieDpc[24]; + +/** Offset 0x0388 - PCIe DPC extensions enable/disable + Enable/disable Downstream Port Containment Extensions for PCIE Root Ports. +**/ + UINT8 PcieEdpc[24]; + +/** Offset 0x03A0 - USB PDO Programming + Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming + during later phase. 1: enable, 0: disable + $EN_DIS +**/ + UINT8 UsbPdoProgramming; + +/** Offset 0x03A1 +**/ + UINT8 UnusedUpdSpace6[3]; + +/** Offset 0x03A4 - Power button debounce configuration + Debounce time for PWRBTN in microseconds. For values not supported by HW, they will + be rounded down to closest supported on. 0: disable, 250-1024000us: supported range +**/ + UINT32 PmcPowerButtonDebounce; + +/** Offset 0x03A8 - PCH eSPI Master and Slave BME enabled + PCH eSPI Master and Slave BME enabled + $EN_DIS +**/ + UINT8 PchEspiBmeMasterSlaveEnabled; + +/** Offset 0x03A9 - PCH SATA use RST Legacy OROM + Use PCH SATA RST Legacy OROM when CSM is Enabled + $EN_DIS +**/ + UINT8 SataRstLegacyOrom; + +/** Offset 0x03AA - Mask to enable the usage of external V1p05 VR rail in specific S0ix or Sx states + Enable External V1P05 Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtV1p05RailEnabledStates; + +/** Offset 0x03AB - Mask to enable the platform configuration of external V1p05 VR rail + External V1P05 Rail Supported Configuration +**/ + UINT8 PchFivrExtV1p05RailSupportedVoltageStates; + +/** Offset 0x03AC - External V1P05 Voltage Value that will be used in S0i2/S0i3 states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtV1p05RailVoltage; + +/** Offset 0x03AE - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtV1p05RailIccMax; + +/** Offset 0x03AF - Mask to enable the usage of external Vnn VR rail in specific S0ix or Sx states + Enable External Vnn Rail in: BIT0:S0i1/S0i2, BIT1:S0i3, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailEnabledStates; + +/** Offset 0x03B0 - Mask to enable the platform configuration of external Vnn VR rail + External Vnn Rail Supported Configuration +**/ + UINT8 PchFivrExtVnnRailSupportedVoltageStates; + +/** Offset 0x03B1 +**/ + UINT8 UnusedUpdSpace7; + +/** Offset 0x03B2 - External Vnn Voltage Value that will be used in S0ix/Sx states + Value is given in 2.5mV increments (0=0mV, 1=2.5mV, 2=5mV...), Default is set to 420 +**/ + UINT16 PchFivrExtVnnRailVoltage; + +/** Offset 0x03B4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailIccMax; + +/** Offset 0x03B5 - Mask to enable the usage of external Vnn VR rail in Sx states + Use only if Ext Vnn Rail config is different in Sx. Enable External Vnn Rail in + Sx: BIT0-1:Reserved, BIT2:S3, BIT3:S4, BIT5:S5 +**/ + UINT8 PchFivrExtVnnRailSxEnabledStates; + +/** Offset 0x03B6 - External Vnn Voltage Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Value is given in 2.5mV increments + (0=0mV, 1=2.5mV, 2=5mV...) +**/ + UINT16 PchFivrExtVnnRailSxVoltage; + +/** Offset 0x03B8 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 200mA +**/ + UINT8 PchFivrExtVnnRailSxIccMax; + +/** Offset 0x03B9 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to low current mode voltage. +**/ + UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; + +/** Offset 0x03BA - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; + +/** Offset 0x03BB - Transition time in microseconds from Retention Mode Voltage to Low Current Mode Voltage + This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX + to retention mode voltage. +**/ + UINT8 PchFivrVccinAuxRetToLowCurModeVolTranTime; + +/** Offset 0x03BC - Transition time in microseconds from Off (0V) to High Current Mode Voltage + This field has 1us resolution. When value is 0 Transition to 0V is disabled. +**/ + UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; + +/** Offset 0x03BE +**/ + UINT8 UnusedUpdSpace8[2]; + +/** Offset 0x03C0 - Trace Hub Memory Base + If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate + trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub + memory is configured properly. +**/ + UINT32 TraceHubMemBase; + +/** Offset 0x03C4 - PMC Debug Message Enable + When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW + will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix + $EN_DIS +**/ + UINT8 PmcDbgMsgEn; + +/** Offset 0x03C5 +**/ + UINT8 UnusedUpdSpace9[3]; + +/** Offset 0x03C8 - Pointer of ChipsetInit Binary + ChipsetInit Binary Pointer. +**/ + UINT32 ChipsetInitBinPtr; + +/** Offset 0x03CC - Length of ChipsetInit Binary + ChipsetInit Binary Length. +**/ + UINT32 ChipsetInitBinLen; + +/** Offset 0x03D0 - FIVR Dynamic Power Management + Enable/Disable FIVR Dynamic Power Management. + $EN_DIS +**/ + UINT8 PchFivrDynPm; + +/** Offset 0x03D1 +**/ + UINT8 UnusedUpdSpace10; + +/** Offset 0x03D2 - External V1P05 Icc Max Value + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtV1p05RailIccMaximum; + +/** Offset 0x03D4 - External Vnn Icc Max Value that will be used in S0ix/Sx states + Granularity of this setting is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailIccMaximum; + +/** Offset 0x03D6 - External Vnn Icc Max Value that will be used in Sx states + Use only if Ext Vnn Rail config is different in Sx. Granularity of this setting + is 1mA and maximal possible value is 500mA +**/ + UINT16 PchFivrExtVnnRailSxIccMaximum; + +/** Offset 0x03D8 - PCH eSPI Link Configuration Lock (SBLCL) + Enable/Disable lock of communication through SET_CONFIG/GET_CONFIG to eSPI slaves + addresseses from range 0x0 - 0x7FF + $EN_DIS +**/ + UINT8 PchEspiLockLinkConfiguration; + +/** Offset 0x03D9 - Extented BIOS Direct Read Decode enable + Enable/Disable access to bigger than 16MB BIOS Region through Direct Memory Reads. + 0: disabled (default), 1: enabled + $EN_DIS +**/ + UINT8 PchSpiExtendedBiosDecodeRangeEnable; + +/** Offset 0x03DA - Enforce Enhanced Debug Mode + Determine if ME should enter Enhanced Debug Mode. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 EnforceEDebugMode; + +/** Offset 0x03DB - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd[1]; + +/** Offset 0x03DC - Extended BIOS Direct Read Decode Range base + Bits of 31:16 of a memory address that'll be a base for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeBase; + +/** Offset 0x03E0 - Extended BIOS Direct Read Decode Range limit + Bits of 31:16 of a memory address that'll be a limit for Extended BIOS Direct Read Decode. +**/ + UINT32 PchSpiExtendedBiosDecodeRangeLimit; + +/** Offset 0x03E4 - CNVi Configuration + This option allows for automatic detection of Connectivity Solution. [Auto Detection] + assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. + 0:Disable, 1:Auto +**/ + UINT8 CnviMode; + +/** Offset 0x03E5 - CNVi BT Core + Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtCore; + +/** Offset 0x03E6 - CNVi BT Audio Offload + Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE + $EN_DIS +**/ + UINT8 CnviBtAudioOffload; + +/** Offset 0x03E7 +**/ + UINT8 UnusedUpdSpace11; + +/** Offset 0x03E8 - CNVi RF_RESET pin muxing + Select CNVi RF_RESET# pin depending on board routing. TGP-LP: GPP_A8 = 0x2942E408(default) + or GPP_F4 = 0x194CE404. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. +**/ + UINT32 CnviRfResetPinMux; + +/** Offset 0x03EC - CNVi CLKREQ pin muxing + Select CNVi CLKREQ pin depending on board routing. TGP-LP: GPP_A9 = 0x3942E609(default) + or GPP_F5 = 0x394CE605. TGP-H: 0. Refer to GPIO_*_MUXING_CNVI_MODEM_CLKREQ_* in + GpioPins*.h. +**/ + UINT32 CnviClkreqPinMux; + +/** Offset 0x03F0 - Enable Host C10 reporting through eSPI + Enable/disable Host C10 reporting to Slave via eSPI Virtual Wire. + $EN_DIS +**/ + UINT8 PchEspiHostC10ReportEnable; + +/** Offset 0x03F1 - PCH USB2 PHY Power Gating enable + 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY + Sus Well PG + $EN_DIS +**/ + UINT8 PmcUsb2PhySusPgEnable; + +/** Offset 0x03F2 - PCH USB OverCurrent mapping enable + 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin + mapping allow for NOA usage of OC pins + $EN_DIS +**/ + UINT8 PchUsbOverCurrentEnable; + +/** Offset 0x03F3 - Espi Lgmr Memory Range decode + This option enables or disables espi lgmr + $EN_DIS +**/ + UINT8 PchEspiLgmrEnable; + +/** Offset 0x03F4 - External V1P05 Control Ramp Timer value + Hold off time to be used when changing the v1p05_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtV1p05RailCtrlRampTmr; + +/** Offset 0x03F5 - External VNN Control Ramp Timer value + Hold off time to be used when changing the vnn_ctrl for external bypass value in us +**/ + UINT8 PchFivrExtVnnRailCtrlRampTmr; + +/** Offset 0x03F6 - Set SATA DEVSLP GPIO Reset Config + Set SATA DEVSLP GPIO Reset Config per port. 0x00 - GpioResetDefault, 0x01 - GpioResumeReset, + 0x03 - GpioHostDeepReset, 0x05 - GpioPlatformReset, 0x07 - GpioDswReset. One byte + for each port, byte0 for port0, byte1 for port1, and so on. +**/ + UINT8 SataPortsDevSlpResetConfig[8]; + +/** Offset 0x03FE - HECI3 state + The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed. + DEPRECATED 0: disable, 1: enable + $EN_DIS +**/ + UINT8 Heci3Enabled; + +/** Offset 0x03FF - PCHHOT# pin + Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchHotEnable; + +/** Offset 0x0400 - SATA LED + SATA LED indicating SATA controller activity. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 SataLedEnable; + +/** Offset 0x0401 - VRAlert# Pin + When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling + to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PchPmVrAlert; + +/** Offset 0x0402 - AMT Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality. + $EN_DIS +**/ + UINT8 AmtEnabled; + +/** Offset 0x0403 - WatchDog Timer Switch + Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 WatchDogEnabled; + +/** Offset 0x0404 - Manageability Mode set by Mebx + Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode. + $EN_DIS +**/ + UINT8 ManageabilityMode; + +/** Offset 0x0405 - PET Progress + Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive + PET Events. Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 FwProgress; + +/** Offset 0x0406 - SOL Switch + Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx. + Setting is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtSolEnabled; + +/** Offset 0x0407 +**/ + UINT8 UnusedUpdSpace12; + +/** Offset 0x0408 - OS Timer + 16 bits Value, Set OS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerOs; + +/** Offset 0x040A - BIOS Timer + 16 bits Value, Set BIOS watchdog timer. Setting is invalid if AmtEnabled is 0. +**/ + UINT16 WatchDogTimerBios; + +/** Offset 0x040C - Remote Assistance Trigger Availablilty + Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx. + $EN_DIS +**/ + UINT8 RemoteAssistance; + +/** Offset 0x040D - KVM Switch + Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx. Setting + is invalid if AmtEnabled is 0. + $EN_DIS +**/ + UINT8 AmtKvmEnabled; + +/** Offset 0x040E - Force MEBX execution + Enable/Disable. 0: Disable, 1: enable, Force MEBX execution. + $EN_DIS +**/ + UINT8 ForcMebxSyncUp; + +/** Offset 0x040F - PCH PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 PcieRpSlotImplemented[24]; + +/** Offset 0x0427 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 PcieRpAcsEnabled[24]; + +/** Offset 0x043F - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 PcieRpEnableCpm[24]; + +/** Offset 0x0457 +**/ + UINT8 UnusedUpdSpace13[1]; + +/** Offset 0x0458 - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 PcieRpDetectTimeoutMs[24]; + +/** Offset 0x0488 - ModPHY SUS Power Domain Dynamic Gating + Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on + PCH-H. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcModPhySusPgEnable; + +/** Offset 0x0489 - V1p05-PHY supply external FET control + Enable/Disable control using EXT_PWR_GATE# pin of external FET to power gate v1p05-PHY + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05PhyExtFetControlEn; + +/** Offset 0x048A - V1p05-IS supply external FET control + Enable/Disable control using EXT_PWR_GATE2# pin of external FET to power gate v1p05-IS + supply. 0: disable, 1: enable + $EN_DIS +**/ + UINT8 PmcV1p05IsExtFetControlEn; + +/** Offset 0x048B - Enable/Disable PavpEnable + Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable + $EN_DIS +**/ + UINT8 PavpEnable; + +/** Offset 0x048C - CdClock Frequency selection + 0 (Default) Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: + 312 Mhz, 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz + 0xFF: Auto (Max based on reference clock frequency), 0: 192, 1: 307.2, 2: 312 Mhz, + 3: 324Mhz, 4: 326.4 Mhz, 5: 552 Mhz, 6: 556.8 Mhz, 7: 648 Mhz, 8: 652.8 Mhz +**/ + UINT8 CdClock; + +/** Offset 0x048D - Enable/Disable PeiGraphicsPeimInit + Enable(Default): FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. + Disable: FSP will NOT initialize the framebuffer. + $EN_DIS +**/ + UINT8 PeiGraphicsPeimInit; + +/** Offset 0x048E - Enable D3 Hot in TCSS + This policy will enable/disable D3 hot support in IOM + $EN_DIS +**/ + UINT8 D3HotEnable; + +/** Offset 0x048F - Enable or disable GNA device + 0=Disable, 1(Default)=Enable + $EN_DIS +**/ + UINT8 GnaEnable; + +/** Offset 0x0490 - TypeC port GPIO setting + GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined + in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Tgl + = TigerLake) +**/ + UINT32 IomTypeCPortPadCfg[8]; + +/** Offset 0x04B0 - CPU USB3 Port Over Current Pin + Describe the specific over current pin number of USBC Port N. +**/ + UINT8 CpuUsb3OverCurrentPin[8]; + +/** Offset 0x04B8 - Enable D3 Cold in TCSS + This policy will enable/disable D3 cold support in IOM + $EN_DIS +**/ + UINT8 D3ColdEnable; + +/** Offset 0x04B9 - Enable/Disable PCIe tunneling for USB4 + Enable/Disable PCIe tunneling for USB4, default is enable + $EN_DIS +**/ + UINT8 ITbtPcieTunnelingForUsb4; + +/** Offset 0x04BA - Enable/Disable SkipFspGop + Enable: Skip FSP provided GOP driver, Disable(Default): Use FSP provided GOP driver + $EN_DIS +**/ + UINT8 SkipFspGop; + +/** Offset 0x04BB - TC State in TCSS + This TC C-State Limit in IOM +**/ + UINT8 TcCstateLimit; + +/** Offset 0x04BC - SaPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 SaPostMemRsvd[5]; + +/** Offset 0x04C1 - Enable VMD controller + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdEnable; + +/** Offset 0x04C2 - Enable VMD portA Support + Enable/disable to VMD portA Support. + $EN_DIS +**/ + UINT8 VmdPortA; + +/** Offset 0x04C3 - Enable VMD portB Support + Enable/disable to VMD portB Support. + $EN_DIS +**/ + UINT8 VmdPortB; + +/** Offset 0x04C4 - Enable VMD portC Support + Enable/disable to VMD portC Support. + $EN_DIS +**/ + UINT8 VmdPortC; + +/** Offset 0x04C5 - Enable VMD portD Support + Enable/disable to VMD portD Support. + $EN_DIS +**/ + UINT8 VmdPortD; + +/** Offset 0x04C6 - VMD Config Bar size + Set The VMD Config Bar Size. +**/ + UINT8 VmdCfgBarSize; + +/** Offset 0x04C7 - VMD Config Bar Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH(Default) + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdCfgBarAttr; + +/** Offset 0x04C8 - VMD Mem Bar1 size + Set The VMD Mem Bar1 Size. +**/ + UINT8 VmdMemBarSize1; + +/** Offset 0x04C9 - VMD Mem Bar1 Attributes + 0: VMD_32BIT_NONPREFETCH(Default), 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar1Attr; + +/** Offset 0x04CA - VMD Mem Bar2 size + Set The VMD Mem Bar2 Size. +**/ + UINT8 VmdMemBarSize2; + +/** Offset 0x04CB - VMD Mem Bar2 Attributes + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH(Default), 2: VMD_64BIT_PREFETCH + 0: VMD_32BIT_NONPREFETCH, 1: VMD_64BIT_NONPREFETCH, 2: VMD_64BIT_PREFETCH +**/ + UINT8 VmdMemBar2Attr; + +/** Offset 0x04CC - Enable/Disable PMC-PD Solution + This policy will enable/disable PMC-PD Solution vs EC-TCPC Solution + $EN_DIS +**/ + UINT8 PmcPdEnable; + +/** Offset 0x04CD +**/ + UINT8 UnusedUpdSpace14; + +/** Offset 0x04CE - TCSS Aux Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssAuxOri; + +/** Offset 0x04D0 - TCSS HSL Orientation Override Enable + Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides +**/ + UINT16 TcssHslOri; + +/** Offset 0x04D2 - USB override in IOM + This policy will enable/disable USB Connect override in IOM + $EN_DIS +**/ + UINT8 UsbOverride; + +/** Offset 0x04D3 - TCSS USB Port Enable + Bits 0, 1, ... max Type C port control enables +**/ + UINT8 UsbTcPortEn; + +/** Offset 0x04D4 - ITBT Root Port Enable + ITBT Root Port Enable, 0:Disable, 1:Enable + 0:Disable, 1:Enable +**/ + UINT8 ITbtPcieRootPortEn[4]; + +/** Offset 0x04D8 - ITBTForcePowerOn Timeout value + ITBTForcePowerOn value. Specified increment values in miliseconds. Range is 0-1000. + 100 = 100 ms. +**/ + UINT16 ITbtForcePowerOnTimeoutInMs; + +/** Offset 0x04DA - ITbtConnectTopology Timeout value + ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range + is 0-10000. 100 = 100 ms. +**/ + UINT16 ITbtConnectTopologyTimeoutInMs; + +/** Offset 0x04DC - VCCST request for IOM + This policy will enable/disable VCCST and also decides if message would be replayed in S4/S5 + $EN_DIS +**/ + UINT8 VccSt; + +/** Offset 0x04DD - TCSS Usb3 Compliance Mode Enable + Used by IOM FW to skip powering down the PHY at the end of disconnect flow + $EN_DIS +**/ + UINT8 Usb3ComplModeEnable; + +/** Offset 0x04DE - ITBT DMA LTR + TCSS DMA1, DMA2 LTR value +**/ + UINT16 ITbtDmaLtr[2]; + +/** Offset 0x04E2 - Enable/Disable CrashLog + Deprecated. Move to PreMem + $EN_DIS +**/ + UINT8 DeprecatedCpuCrashLogEnable; + +/** Offset 0x04E3 - Enable/Disable PTM + This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports + $EN_DIS +**/ + UINT8 PtmEnabled[4]; + +/** Offset 0x04E7 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 SaPcieItbtRpLtrEnable[4]; + +/** Offset 0x04EB - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x04EF - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x04F3 +**/ + UINT8 UnusedUpdSpace15[1]; + +/** Offset 0x04F4 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x04FC - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0500 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 SaPcieItbtRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0504 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 SaPcieItbtRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x050C - Force LTR Override + Force LTR Override. +**/ + UINT8 SaPcieItbtRpForceLtrOverride[4]; + +/** Offset 0x0510 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 SaPcieItbtRpLtrConfigLock[4]; + +/** Offset 0x0514 - Advanced Encryption Standard (AES) feature + Enable or Disable Advanced Encryption Standard (AES) feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 AesEnable; + +/** Offset 0x0515 - Power State 3 enable/disable + PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; 1: Enable. + For all VR Indexes +**/ + UINT8 Psi3Enable[5]; + +/** Offset 0x051A - Power State 4 enable/disable + PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 Psi4Enable[5]; + +/** Offset 0x051F +**/ + UINT8 UnusedUpdSpace16[1]; + +/** Offset 0x0520 - Imon slope correction + PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values. + Range is 0-200. 125 = 1.25. 0: Auto.For all VR Indexes +**/ + UINT16 ImonSlope[5]; + +/** Offset 0x052A - Imon offset correction + PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer. + Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. 0: Auto +**/ + UINT16 ImonOffset[5]; + +/** Offset 0x0534 - Enable/Disable BIOS configuration of VR + Enable/Disable BIOS configuration of VR; 0: Disable; 1: Enable.For all VR Indexes +**/ + UINT8 VrConfigEnable[5]; + +/** Offset 0x0539 - Thermal Design Current enable/disable + PCODE MMIO Mailbox: Thermal Design Current enable/disable; 0: Disable; 1: + Enable.For all VR Indexes +**/ + UINT8 TdcEnable[5]; + +/** Offset 0x053E - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + DEPRECATED. Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - + 6ms , 7 - 7ms , 8 - 8ms , 10 - 10ms.For all VR Index +**/ + UINT8 TdcTimeWindow[5]; + +/** Offset 0x0543 - Thermal Design Current Lock + PCODE MMIO Mailbox: Thermal Design Current Lock; 0: Disable; 1: Enable.For + all VR Indexes +**/ + UINT8 TdcLock[5]; + +/** Offset 0x0548 - Platform Psys slope correction + PCODE MMIO Mailbox: Platform Psys slope correction. 0 - Auto Specified in + 1/100 increment values. Range is 0-200. 125 = 1.25 +**/ + UINT8 PsysSlope; + +/** Offset 0x0549 +**/ + UINT8 PsysOffset; + +/** Offset 0x054A - Acoustic Noise Mitigation feature + Enable or Disable Acoustic Noise Mitigation feature. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 AcousticNoiseMitigation; + +/** Offset 0x054B - Disable Fast Slew Rate for Deep Package C States for VR domains + Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation + feature enabled. 0: False; 1: True + $EN_DIS +**/ + UINT8 FastPkgCRampDisable[5]; + +/** Offset 0x0550 - Slew Rate configuration for Deep Package C States for VR domains + Slew Rate configuration for Deep Package C States for VR domains based on Acoustic + Noise Mitigation feature enabled. 0: Fast/2; 1: Fast/4; 2: Fast/8; 3: Fast/16 + 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16 +**/ + UINT8 SlowSlewRate[5]; + +/** Offset 0x0555 - Enable multi phases silicon initialization + A switch to determine MultiPhaseSiInit will be executed or not + $EN_DIS +**/ + UINT8 EnableMultiPhaseSiliconInit; + +/** Offset 0x0556 - Thermal Design Current current limit + PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units. + Range is 0-4095. 1000 = 125A. 0: Auto. For all VR Indexes +**/ + UINT16 TdcCurrentLimit[5]; + +/** Offset 0x0560 - AcLoadline + PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249. Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 AcLoadline[5]; + +/** Offset 0x056A - DcLoadline + PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is + 0-6249.Intel Recommended Defaults vary by domain and SKU. +**/ + UINT16 DcLoadline[5]; + +/** Offset 0x0574 - Power State 1 Threshold current + PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi1Threshold[5]; + +/** Offset 0x057E - Power State 2 Threshold current + PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi2Threshold[5]; + +/** Offset 0x0588 - Power State 3 Threshold current + PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A. +**/ + UINT16 Psi3Threshold[5]; + +/** Offset 0x0592 - Icc Max limit + PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A +**/ + UINT16 IccMax[5]; + +/** Offset 0x059C - VR Voltage Limit + PCODE MMIO Mailbox: VR Voltage Limit. DEPRECATED, Range is 0-7999mV. +**/ + UINT16 VrVoltageLimit[5]; + +/** Offset 0x05A6 - Enable VR specific mailbox command + VR specific mailbox commands. 00b - no VR specific command sent. 01b - A + VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific + command sent for PS4 exit issue. 11b - Reserved. + $EN_DIS +**/ + UINT8 SendVrMbxCmd; + +/** Offset 0x05A7 - Reserved + Reserved +**/ + UINT8 Reserved2; + +/** Offset 0x05A8 - Enable or Disable TXT + Enable or Disable TXT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TxtEnable; + +/** Offset 0x05A9 - Skip Multi-Processor Initialization + When this is skipped, boot loader must initialize processors before SilicionInit + API. 0: Initialize; 1: Skip + $EN_DIS +**/ + UINT8 SkipMpInit; + +/** Offset 0x05AA - FIVR RFI Frequency + PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. 0: + Auto. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock; + 0-1535 (Up to 153.5MHz) for 19MHz clock. +**/ + UINT16 FivrRfiFrequency; + +/** Offset 0x05AC - FIVR RFI Spread Spectrum + Set the Spread Spectrum Range. 1.5%; Range: 0.5%, 1%, 1.5%, 2%, 3%, 4%, 5%, + 6%. Each Range is translated to an encoded value for FIVR register. 0.5% = 0, 1% + = 3, 1.5% = 8, 2% = 18, 3% = 28, 4% = 34, 5% = 39, 6% = 44. +**/ + UINT8 FivrSpreadSpectrum; + +/** Offset 0x05AD +**/ + UINT8 UnusedUpdSpace17[3]; + +/** Offset 0x05B0 - CpuBistData + Pointer CPU BIST Data +**/ + UINT32 CpuBistData; + +/** Offset 0x05B4 - CpuMpPpi + Optional pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. + If not NULL, FSP will use the boot loader's implementation of multiprocessing. + See section 5.1.4 of the FSP Integration Guide for more details. +**/ + UINT32 CpuMpPpi; + +/** Offset 0x05B8 - CpuMpHob + @deprecated This is not needed in current version of FSP. +**/ + UINT32 CpuMpHob; + +/** Offset 0x05BC - RFI Mitigation + Enable or Disable RFI Mitigation. 0: Disable - DCM is the IO_N default; 1: + Enable - Enable IO_N DCM/CCM switching as RFI mitigation. + $EN_DIS +**/ + UINT8 RfiMitigation; + +/** Offset 0x05BD - FIVR RFI Spread Spectrum Enable or disable + Enable or Disable FIVR RFI Spread Spectrum. 0: Disable ; 1: Enable +**/ + UINT8 FivrSpectrumEnable; + +/** Offset 0x05BE - Pre Wake Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum pre-wake + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled. Range 0-255 0. +**/ + UINT8 PreWake; + +/** Offset 0x05BF - Ramp Up Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Up + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampUp; + +/** Offset 0x05C0 - Ramp Down Randomization time + PCODE MMIO Mailbox: Acoustic Noise Mitigation Range.Defines the maximum Ramp Down + randomization time in micro ticks.This can be programmed only if AcousticNoiseMitigation + is enabled.Range 0-255 0. +**/ + UINT8 RampDown; + +/** Offset 0x05C1 +**/ + UINT8 CpuPostMemRsvd[11]; + +/** Offset 0x05CC - PpinSupport to view Protected Processor Inventory Number + Enable or Disable or Auto (Based on End of Manufacturing flag. Disabled if this + flag is set) for PPIN Support + 0: Disable, 1: Enable, 2: Auto +**/ + UINT8 PpinSupport; + +/** Offset 0x05CD - Enable or Disable Minimum Voltage Override + Enable or disable Minimum Voltage overrides ; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableMinVoltageOverride; + +/** Offset 0x05CE - Min Voltage for Runtime + PCODE MMIO Mailbox: Minimum voltage for runtime. Valid if EnableMinVoltageOverride + = 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageRuntime; + +/** Offset 0x05D0 - Base of memory region allocated for Processor Trace + Base address of memory region allocated for Processor Trace. Processor Trace requires + 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT64 ProcessorTraceMemBase; + +/** Offset 0x05D8 - Memory region allocation for Processor Trace + Length in bytes of memory region allocated for Processor Trace. Processor Trace + requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable +**/ + UINT32 ProcessorTraceMemLength; + +/** Offset 0x05DC - Min Voltage for C8 + PCODE MMIO Mailbox: Minimum voltage for C8. Valid if EnableMinVoltageOverride = + 1. Range 0 to 1999mV. 0: 0mV +**/ + UINT16 MinVoltageC8; + +/** Offset 0x05DE - Platform Psys offset correction + PCODE MMIO Mailbox: Platform Psys offset correction. 0 - Auto Units 1/1000, + Range 0-63999. For an offset of 25.348, enter 25348. +**/ + UINT16 PsysOffset1; + +/** Offset 0x05E0 - Smbios Type4 Max Speed Override + Provide the option for platform to override the MaxSpeed field of Smbios Type 4. + If this value is not zero, it dominates the field. +**/ + UINT16 SmbiosType4MaxSpeedOverride; + +/** Offset 0x05E2 - AvxDisable + Enable or Disable AVX Support. + 0: Enable, 1: Disable +**/ + UINT8 AvxDisable; + +/** Offset 0x05E3 - Avx3Disable + Enable or Disable AVX3 Support + 0: Enable, 1: Disable +**/ + UINT8 Avx3Disable; + +/** Offset 0x05E4 - ReservedCpuPostMemProduction + Reserved for CPU Post-Mem Production + $EN_DIS +**/ + UINT8 ReservedCpuPostMemProduction[4]; + +/** Offset 0x05E8 - Enable Power Optimizer + Enable DMI Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 PchPwrOptEnable; + +/** Offset 0x05E9 - PCH Flash Protection Ranges Write Enble + Write or erase is blocked by hardware. +**/ + UINT8 PchWriteProtectionEnable[5]; + +/** Offset 0x05EE - PCH Flash Protection Ranges Read Enble + Read is blocked by hardware. +**/ + UINT8 PchReadProtectionEnable[5]; + +/** Offset 0x05F3 +**/ + UINT8 UnusedUpdSpace18[1]; + +/** Offset 0x05F4 - PCH Protect Range Limit + Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for + limit comparison. +**/ + UINT16 PchProtectedRangeLimit[5]; + +/** Offset 0x05FE - PCH Protect Range Base + Left shifted address by 12 bits with address bits 11:0 are assumed to be 0. +**/ + UINT16 PchProtectedRangeBase[5]; + +/** Offset 0x0608 - Enable Pme + Enable Azalia wake-on-ring. + $EN_DIS +**/ + UINT8 PchHdaPme; + +/** Offset 0x0609 - HD Audio Link Frequency + HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz. + 0: 6MHz, 1: 12MHz, 2: 24MHz +**/ + UINT8 PchHdaLinkFrequency; + +/** Offset 0x060A - PchPostMemRsvd + Reserved for PCH Post-Mem + $EN_DIS +**/ + UINT8 PchPostMemRsvd4[3]; + +/** Offset 0x060D - Enable PCH ISH SPI Cs0 pins assigned + Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiCs0Enable[1]; + +/** Offset 0x060E - Enable PCH Io Apic Entry 24-119 + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchIoApicEntry24_119; + +/** Offset 0x060F - PCH Io Apic ID + This member determines IOAPIC ID. Default is 0x02. +**/ + UINT8 PchIoApicId; + +/** Offset 0x0610 - Enable PCH ISH SPI pins assigned + Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshSpiEnable[1]; + +/** Offset 0x0611 - Enable PCH ISH UART pins assigned + Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshUartEnable[2]; + +/** Offset 0x0613 - Enable PCH ISH I2C pins assigned + Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshI2cEnable[3]; + +/** Offset 0x0616 - Enable PCH ISH GP pins assigned + Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. +**/ + UINT8 PchIshGpEnable[8]; + +/** Offset 0x061E - PCH ISH PDT Unlock Msg + 0: False; 1: True. + $EN_DIS +**/ + UINT8 PchIshPdtUnlock; + +/** Offset 0x061F - Enable PCH Lan LTR capabilty of PCH internal LAN + 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PchLanLtrEnable; + +/** Offset 0x0620 - Enable LOCKDOWN BIOS LOCK + Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region + protection. + $EN_DIS +**/ + UINT8 PchLockDownBiosLock; + +/** Offset 0x0621 - PCH Compatibility Revision ID + This member describes whether or not the CRID feature of PCH should be enabled. + $EN_DIS +**/ + UINT8 PchCrid; + +/** Offset 0x0622 - RTC BIOS Interface Lock + Enable RTC BIOS interface lock. When set, prevents RTC TS (BUC.TS) from being changed. + $EN_DIS +**/ + UINT8 RtcBiosInterfaceLock; + +/** Offset 0x0623 - RTC Cmos Memory Lock + Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper + and and lower 128-byte bank of RTC RAM. + $EN_DIS +**/ + UINT8 RtcMemoryLock; + +/** Offset 0x0624 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 PcieRpHotPlug[24]; + +/** Offset 0x063C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 PcieRpPmSci[24]; + +/** Offset 0x0654 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 PcieRpTransmitterHalfSwing[24]; + +/** Offset 0x066C - Enable PCIE RP Clk Req Detect + Probe CLKREQ# signal before enabling CLKREQ# based power management. +**/ + UINT8 PcieRpClkReqDetect[24]; + +/** Offset 0x0684 - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 PcieRpAdvancedErrorReporting[24]; + +/** Offset 0x069C - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 PcieRpUnsupportedRequestReport[24]; + +/** Offset 0x06B4 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 PcieRpFatalErrorReport[24]; + +/** Offset 0x06CC - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 PcieRpNoFatalErrorReport[24]; + +/** Offset 0x06E4 - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 PcieRpCorrectableErrorReport[24]; + +/** Offset 0x06FC - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnFatalError[24]; + +/** Offset 0x0714 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnNonFatalError[24]; + +/** Offset 0x072C - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 PcieRpSystemErrorOnCorrectableError[24]; + +/** Offset 0x0744 - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD. +**/ + UINT8 PcieRpMaxPayload[24]; + +/** Offset 0x075C - Touch Host Controller Port 0 Assignment + Assign THC Port 0 + 0x0:ThcAssignmentNone, 0x1:ThcAssignmentThc0 +**/ + UINT8 ThcPort0Assignment; + +/** Offset 0x075D +**/ + UINT8 UnusedUpdSpace19[3]; + +/** Offset 0x0760 - THC Port 0 Interrupt Pin Mux + Set THC Port 0 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort0InterruptPinMuxing; + +/** Offset 0x0764 - Touch Host Controller Port 1 Assignment + Assign THC Port 1 + 0x0:ThcAssignmentNone, 0x1:ThcPort1AssignmentThc0, 0x2:ThcAssignmentThc1 +**/ + UINT8 ThcPort1Assignment; + +/** Offset 0x0765 - Touch Host Controller Port 1 ReadFrequency + Set THC Port 1 Read Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1ReadFrequency; + +/** Offset 0x0766 - Touch Host Controller Port 1 WriteFrequency + Set THC Port 1 Write Frequency (THC_PORT_FREQUENCY enum): 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz + 0:2p1MHz,1:2p5Mz,2:3Mz,3:3p75Mz,4:5MHz,5:7p5MHz,6:15MHz,7:17MHz,8:20MHz,9:24MHz,10:30MHz +**/ + UINT8 ThcPort1WriteFrequency; + +/** Offset 0x0767 +**/ + UINT8 UnusedUpdSpace20; + +/** Offset 0x0768 - THC Port 1 Interrupt Pin Mux + Set THC Port 1 Pin Muxing Value if signal can be enabled on multiple pads. Refer + to GPIO_*_MUXING_THC_SPIx_INTB_* for possible values. +**/ + UINT32 ThcPort1InterruptPinMuxing; + +/** Offset 0x076C - PCIE RP Pcie Speed + Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see: + PCIE_SPEED). +**/ + UINT8 PcieRpPcieSpeed[24]; + +/** Offset 0x0784 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 PcieRpPhysicalSlotNumber[24]; + +/** Offset 0x079C - PCIE RP Completion Timeout + The root port completion timeout(see: PCIE_COMPLETION_TIMEOUT). Default is PcieCompletionTO_Default. +**/ + UINT8 PcieRpCompletionTimeout[24]; + +/** Offset 0x07B4 - PCIE RP Aspm + The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is + PchPcieAspmAutoConfig. +**/ + UINT8 PcieRpAspm[24]; + +/** Offset 0x07CC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). + Default is PchPcieL1SubstatesL1_1_2. +**/ + UINT8 PcieRpL1Substates[24]; + +/** Offset 0x07E4 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 PcieRpLtrEnable[24]; + +/** Offset 0x07FC - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 PcieRpLtrConfigLock[24]; + +/** Offset 0x0814 - PCIe override default settings for EQ + Choose PCIe EQ method + $EN_DIS +**/ + UINT8 PcieEqOverrideDefault; + +/** Offset 0x0815 - PCIe choose EQ method + Choose PCIe EQ method + 0: HardwareEq, 1: FixedEq +**/ + UINT8 PcieEqMethod; + +/** Offset 0x0816 - PCIe choose EQ mode + Choose PCIe EQ mode + 0: PresetEq, 1: CoefficientEq +**/ + UINT8 PcieEqMode; + +/** Offset 0x0817 - PCIe EQ local transmitter override + Enable/Disable local transmitter override + $EN_DIS +**/ + UINT8 PcieEqLocalTransmitterOverrideEnable; + +/** Offset 0x0818 - PCIe number of valid list entries + Select number of presets or coefficients depending on the mode +**/ + UINT8 PcieEqPh3NumberOfPresetsOrCoefficients; + +/** Offset 0x0819 - PCIe pre-cursor coefficient list + Provide a list of pre-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PreCursorList[10]; + +/** Offset 0x0823 - PCIe post-cursor coefficient list + Provide a list of post-cursor coefficients to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PostCursorList[10]; + +/** Offset 0x082D - PCIe preset list + Provide a list of presets to be used during phase 3 EQ +**/ + UINT8 PcieEqPh3PresetList[11]; + +/** Offset 0x0838 - PCIe EQ phase 1 downstream transmitter port preset + Allows to select the downstream port preset value that will be used during phase + 1 of equalization +**/ + UINT32 PcieEqPh1DownstreamPortTransmitterPreset; + +/** Offset 0x083C - PCIe EQ phase 1 upstream tranmitter port preset + Allows to select the upstream port preset value that will be used during phase 1 + of equalization +**/ + UINT32 PcieEqPh1UpstreamPortTransmitterPreset; + +/** Offset 0x0840 - PCIe EQ phase 2 local transmitter override preset + Allows to select the value of the preset used during phase 2 local transmitter override +**/ + UINT8 PcieEqPh2LocalTransmitterOverridePreset; + +/** Offset 0x0841 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 PcieEnablePeerMemoryWrite; + +/** Offset 0x0842 - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 PcieComplianceTestMode; + +/** Offset 0x0843 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 PcieRpFunctionSwap; + +/** Offset 0x0844 - Enable/Disable PEG GEN3 Static EQ Phase1 programming + Program Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen3ProgramStaticEq; + +/** Offset 0x0845 - Enable/Disable GEN4 Static EQ Phase1 programming + Program Gen4 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static Presets + Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming + $EN_DIS +**/ + UINT8 CpuPcieGen4ProgramStaticEq; + +/** Offset 0x0846 - PCH Pm PME_B0_S5_DIS + When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1. + $EN_DIS +**/ + UINT8 PchPmPmeB0S5Dis; + +/** Offset 0x0847 - PCIE IMR + Enables Isolated Memory Region for PCIe. + $EN_DIS +**/ + UINT8 PcieRpImrEnabled; + +/** Offset 0x0848 - PCIE IMR port number + Selects PCIE root port number for IMR feature. +**/ + UINT8 PcieRpImrSelection; + +/** Offset 0x0849 - PCH Pm Wol Enable Override + Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register. + $EN_DIS +**/ + UINT8 PchPmWolEnableOverride; + +/** Offset 0x084A - PCH Pm Pcie Wake From DeepSx + Determine if enable PCIe to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmPcieWakeFromDeepSx; + +/** Offset 0x084B - PCH Pm WoW lan Enable + Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanEnable; + +/** Offset 0x084C - PCH Pm WoW lan DeepSx Enable + Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the + PWRM_CFG3 register. + $EN_DIS +**/ + UINT8 PchPmWoWlanDeepSxEnable; + +/** Offset 0x084D - PCH Pm Lan Wake From DeepSx + Determine if enable LAN to wake from deep Sx. + $EN_DIS +**/ + UINT8 PchPmLanWakeFromDeepSx; + +/** Offset 0x084E - PCH Pm Deep Sx Pol + Deep Sx Policy. + $EN_DIS +**/ + UINT8 PchPmDeepSxPol; + +/** Offset 0x084F - PCH Pm Slp S3 Min Assert + SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms. +**/ + UINT8 PchPmSlpS3MinAssert; + +/** Offset 0x0850 - PCH Pm Slp S4 Min Assert + SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s. +**/ + UINT8 PchPmSlpS4MinAssert; + +/** Offset 0x0851 - PCH Pm Slp Sus Min Assert + SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s. +**/ + UINT8 PchPmSlpSusMinAssert; + +/** Offset 0x0852 - PCH Pm Slp A Min Assert + SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s. +**/ + UINT8 PchPmSlpAMinAssert; + +/** Offset 0x0853 - USB Overcurrent Override for DbC + This option overrides USB Over Current enablement state that USB OC will be disabled + after enabling this option. Enable when DbC is used to avoid signaling conflicts. + $EN_DIS +**/ + UINT8 PchEnableDbcObs; + +/** Offset 0x0854 - PCH Pm Slp Strch Sus Up + Enable SLP_X Stretching After SUS Well Power Up. + $EN_DIS +**/ + UINT8 PchPmSlpStrchSusUp; + +/** Offset 0x0855 - PCH Pm Slp Lan Low Dc + Enable/Disable SLP_LAN# Low on DC Power. + $EN_DIS +**/ + UINT8 PchPmSlpLanLowDc; + +/** Offset 0x0856 - PCH Pm Pwr Btn Override Period + PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s. +**/ + UINT8 PchPmPwrBtnOverridePeriod; + +/** Offset 0x0857 - PCH Pm Disable Dsx Ac Present Pulldown + When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit. + $EN_DIS +**/ + UINT8 PchPmDisableDsxAcPresentPulldown; + +/** Offset 0x0858 - PCH Pm Disable Native Power Button + Power button native mode disable. + $EN_DIS +**/ + UINT8 PchPmDisableNativePowerButton; + +/** Offset 0x0859 - PCH Pm ME_WAKE_STS + Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmMeWakeSts; + +/** Offset 0x085A - PCH Pm WOL_OVR_WK_STS + Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register. + $EN_DIS +**/ + UINT8 PchPmWolOvrWkSts; + +/** Offset 0x085B - PCH Pm Reset Power Cycle Duration + Could be customized in the unit of second. Please refer to EDS for all support settings. + 0 is default, 1 is 1 second, 2 is 2 seconds, ... +**/ + UINT8 PchPmPwrCycDur; + +/** Offset 0x085C - PCH Pm Pcie Pll Ssc + Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No + BIOS override. +**/ + UINT8 PchPmPciePllSsc; + +/** Offset 0x085D - PCH Legacy IO Low Latency Enable + Set to enable low latency of legacy IO. 0: Disable, 1: Enable + $EN_DIS +**/ + UINT8 PchLegacyIoLowLatency; + +/** Offset 0x085E - PCH Sata Pwr Opt Enable + SATA Power Optimizer on PCH side. + $EN_DIS +**/ + UINT8 SataPwrOptEnable; + +/** Offset 0x085F - PCH Sata eSATA Speed Limit + When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed. + $EN_DIS +**/ + UINT8 EsataSpeedLimit; + +/** Offset 0x0860 - PCH Sata Speed Limit + Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault. +**/ + UINT8 SataSpeedLimit; + +/** Offset 0x0861 - Enable SATA Port HotPlug + Enable SATA Port HotPlug. +**/ + UINT8 SataPortsHotPlug[8]; + +/** Offset 0x0869 - Enable SATA Port Interlock Sw + Enable SATA Port Interlock Sw. +**/ + UINT8 SataPortsInterlockSw[8]; + +/** Offset 0x0871 - Enable SATA Port External + Enable SATA Port External. +**/ + UINT8 SataPortsExternal[8]; + +/** Offset 0x0879 - Enable SATA Port SpinUp + Enable the COMRESET initialization Sequence to the device. +**/ + UINT8 SataPortsSpinUp[8]; + +/** Offset 0x0881 - Enable SATA Port Solid State Drive + 0: HDD; 1: SSD. +**/ + UINT8 SataPortsSolidStateDrive[8]; + +/** Offset 0x0889 - Enable SATA Port Enable Dito Config + Enable DEVSLP Idle Timeout settings (DmVal, DitoVal). +**/ + UINT8 SataPortsEnableDitoConfig[8]; + +/** Offset 0x0891 - Enable SATA Port DmVal + DITO multiplier. Default is 15. +**/ + UINT8 SataPortsDmVal[8]; + +/** Offset 0x0899 +**/ + UINT8 UnusedUpdSpace21[1]; + +/** Offset 0x089A - Enable SATA Port DmVal + DEVSLP Idle Timeout (DITO), Default is 625. +**/ + UINT16 SataPortsDitoVal[8]; + +/** Offset 0x08AA - Enable SATA Port ZpOdd + Support zero power ODD. +**/ + UINT8 SataPortsZpOdd[8]; + +/** Offset 0x08B2 - PCH Sata Rst Raid Alternate Id + Enable RAID Alternate ID. + $EN_DIS +**/ + UINT8 SataRstRaidDeviceId; + +/** Offset 0x08B3 - PCH Sata Rst Raid0 + RAID0. + $EN_DIS +**/ + UINT8 SataRstRaid0; + +/** Offset 0x08B4 - PCH Sata Rst Raid1 + RAID1. + $EN_DIS +**/ + UINT8 SataRstRaid1; + +/** Offset 0x08B5 - PCH Sata Rst Raid10 + RAID10. + $EN_DIS +**/ + UINT8 SataRstRaid10; + +/** Offset 0x08B6 - PCH Sata Rst Raid5 + RAID5. + $EN_DIS +**/ + UINT8 SataRstRaid5; + +/** Offset 0x08B7 - PCH Sata Rst Irrt + Intel Rapid Recovery Technology. + $EN_DIS +**/ + UINT8 SataRstIrrt; + +/** Offset 0x08B8 - PCH Sata Rst Orom Ui Banner + OROM UI and BANNER. + $EN_DIS +**/ + UINT8 SataRstOromUiBanner; + +/** Offset 0x08B9 - PCH Sata Rst Orom Ui Delay + 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY). +**/ + UINT8 SataRstOromUiDelay; + +/** Offset 0x08BA - PCH Sata Rst Hdd Unlock + Indicates that the HDD password unlock in the OS is enabled. + $EN_DIS +**/ + UINT8 SataRstHddUnlock; + +/** Offset 0x08BB - PCH Sata Rst Led Locate + Indicates that the LED/SGPIO hardware is attached and ping to locate feature is + enabled on the OS. + $EN_DIS +**/ + UINT8 SataRstLedLocate; + +/** Offset 0x08BC - PCH Sata Rst Irrt Only + Allow only IRRT drives to span internal and external ports. + $EN_DIS +**/ + UINT8 SataRstIrrtOnly; + +/** Offset 0x08BD - PCH Sata Rst Smart Storage + RST Smart Storage caching Bit. + $EN_DIS +**/ + UINT8 SataRstSmartStorage; + +/** Offset 0x08BE - PCH Sata Rst Pcie Storage Remap enable + Enable Intel RST for PCIe Storage remapping. +**/ + UINT8 SataRstPcieEnable[3]; + +/** Offset 0x08C1 - PCH Sata Rst Pcie Storage Port + Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect). +**/ + UINT8 SataRstPcieStoragePort[3]; + +/** Offset 0x08C4 - PCH Sata Rst Pcie Device Reset Delay + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms +**/ + UINT8 SataRstPcieDeviceResetDelay[3]; + +/** Offset 0x08C7 - UFS enable/disable + PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms + $EN_DIS +**/ + UINT8 UfsEnable[2]; + +/** Offset 0x08C9 - IEH Mode + Integrated Error Handler Mode, 0: Bypass, 1: Enable + 0: Bypass, 1:Enable +**/ + UINT8 IehMode; + +/** Offset 0x08CA - Thermal Throttling Custimized T0Level Value + Custimized T0Level value. +**/ + UINT16 PchT0Level; + +/** Offset 0x08CC - Thermal Throttling Custimized T1Level Value + Custimized T1Level value. +**/ + UINT16 PchT1Level; + +/** Offset 0x08CE - Thermal Throttling Custimized T2Level Value + Custimized T2Level value. +**/ + UINT16 PchT2Level; + +/** Offset 0x08D0 - Enable The Thermal Throttle + Enable the thermal throttle function. + $EN_DIS +**/ + UINT8 PchTTEnable; + +/** Offset 0x08D1 - PMSync State 13 + When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force + at least T2 state. + $EN_DIS +**/ + UINT8 PchTTState13Enable; + +/** Offset 0x08D2 - Thermal Throttle Lock + Thermal Throttle Lock. + $EN_DIS +**/ + UINT8 PchTTLock; + +/** Offset 0x08D3 - Thermal Throttling Suggested Setting + Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 TTSuggestedSetting; + +/** Offset 0x08D4 - Enable PCH Cross Throttling + Enable/Disable PCH Cross Throttling + $EN_DIS +**/ + UINT8 TTCrossThrottling; + +/** Offset 0x08D5 - DMI Thermal Sensor Autonomous Width Enable + DMI Thermal Sensor Autonomous Width Enable. + $EN_DIS +**/ + UINT8 PchDmiTsawEn; + +/** Offset 0x08D6 - DMI Thermal Sensor Suggested Setting + DMT thermal sensor suggested representative values. + $EN_DIS +**/ + UINT8 DmiSuggestedSetting; + +/** Offset 0x08D7 - Thermal Sensor 0 Target Width + Thermal Sensor 0 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS0TW; + +/** Offset 0x08D8 - Thermal Sensor 1 Target Width + Thermal Sensor 1 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS1TW; + +/** Offset 0x08D9 - Thermal Sensor 2 Target Width + Thermal Sensor 2 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS2TW; + +/** Offset 0x08DA - Thermal Sensor 3 Target Width + Thermal Sensor 3 Target Width. + 0:x1, 1:x2, 2:x4, 3:x8, 4:x16 +**/ + UINT8 DmiTS3TW; + +/** Offset 0x08DB - Port 0 T1 Multipler + Port 0 T1 Multipler. +**/ + UINT8 SataP0T1M; + +/** Offset 0x08DC - Port 0 T2 Multipler + Port 0 T2 Multipler. +**/ + UINT8 SataP0T2M; + +/** Offset 0x08DD - Port 0 T3 Multipler + Port 0 T3 Multipler. +**/ + UINT8 SataP0T3M; + +/** Offset 0x08DE - Port 0 Tdispatch + Port 0 Tdispatch. +**/ + UINT8 SataP0TDisp; + +/** Offset 0x08DF - Port 1 T1 Multipler + Port 1 T1 Multipler. +**/ + UINT8 SataP1T1M; + +/** Offset 0x08E0 - Port 1 T2 Multipler + Port 1 T2 Multipler. +**/ + UINT8 SataP1T2M; + +/** Offset 0x08E1 - Port 1 T3 Multipler + Port 1 T3 Multipler. +**/ + UINT8 SataP1T3M; + +/** Offset 0x08E2 - Port 1 Tdispatch + Port 1 Tdispatch. +**/ + UINT8 SataP1TDisp; + +/** Offset 0x08E3 - Port 0 Tinactive + Port 0 Tinactive. +**/ + UINT8 SataP0Tinact; + +/** Offset 0x08E4 - Port 0 Alternate Fast Init Tdispatch + Port 0 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP0TDispFinit; + +/** Offset 0x08E5 - Port 1 Tinactive + Port 1 Tinactive. +**/ + UINT8 SataP1Tinact; + +/** Offset 0x08E6 - Port 1 Alternate Fast Init Tdispatch + Port 1 Alternate Fast Init Tdispatch. + $EN_DIS +**/ + UINT8 SataP1TDispFinit; + +/** Offset 0x08E7 - Sata Thermal Throttling Suggested Setting + Sata Thermal Throttling Suggested Setting. + $EN_DIS +**/ + UINT8 SataThermalSuggestedSetting; + +/** Offset 0x08E8 - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. + $EN_DIS +**/ + UINT8 PchMemoryThrottlingEnable; + +/** Offset 0x08E9 - Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPmsyncEnable[2]; + +/** Offset 0x08EB - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryC0TransmitEnable[2]; + +/** Offset 0x08ED - Enable Memory Thermal Throttling + Enable Memory Thermal Throttling. +**/ + UINT8 PchMemoryPinSelection[2]; + +/** Offset 0x08EF +**/ + UINT8 UnusedUpdSpace22; + +/** Offset 0x08F0 - Thermal Device Temperature + Decides the temperature. +**/ + UINT16 PchTemperatureHotLevel; + +/** Offset 0x08F2 - USB2 Port Over Current Pin + Describe the specific over current pin number of USB 2.0 Port N. +**/ + UINT8 Usb2OverCurrentPin[16]; + +/** Offset 0x0902 - USB3 Port Over Current Pin + Describe the specific over current pin number of USB 3.0 Port N. +**/ + UINT8 Usb3OverCurrentPin[10]; + +/** Offset 0x090C - Enable xHCI LTR override + Enables override of recommended LTR values for xHCI + $EN_DIS +**/ + UINT8 PchUsbLtrOverrideEnable; + +/** Offset 0x090D +**/ + UINT8 UnusedUpdSpace23[3]; + +/** Offset 0x0910 - xHCI High Idle Time LTR override + Value used for overriding LTR recommendation for xHCI High Idle Time LTR setting +**/ + UINT32 PchUsbLtrHighIdleTimeOverride; + +/** Offset 0x0914 - xHCI Medium Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Medium Idle Time LTR setting +**/ + UINT32 PchUsbLtrMediumIdleTimeOverride; + +/** Offset 0x0918 - xHCI Low Idle Time LTR override + Value used for overriding LTR recommendation for xHCI Low Idle Time LTR setting +**/ + UINT32 PchUsbLtrLowIdleTimeOverride; + +/** Offset 0x091C - Enable 8254 Static Clock Gating + Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time + might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support + legacy OS using 8254 timer. Also enable this while S0ix is enabled. + $EN_DIS +**/ + UINT8 Enable8254ClockGating; + +/** Offset 0x091D - Enable 8254 Static Clock Gating On S3 + This is only applicable when Enable8254ClockGating is disabled. FSP will do the + 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This + avoids the SMI requirement for the programming. + $EN_DIS +**/ + UINT8 Enable8254ClockGatingOnS3; + +/** Offset 0x091E - PCH Sata Rst Optane Memory + Optane Memory + $EN_DIS +**/ + UINT8 SataRstOptaneMemory; + +/** Offset 0x091F - PCH Sata Rst CPU Attached Storage + CPU Attached Storage + $EN_DIS +**/ + UINT8 SataRstCpuAttachedStorage; + +/** Offset 0x0920 - Enable TCO timer. + When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have + huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer + emulation must be enabled, and WDAT table must not be exposed to the OS. + $EN_DIS +**/ + UINT8 EnableTcoTimer; + +/** Offset 0x0921 - Hybrid Storage Detection and Configuration Mode + Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. + Default is 0: Disabled + 0: Disabled, 1: Dynamic Configuration +**/ + UINT8 HybridStorageMode; + +/** Offset 0x0922 +**/ + UINT8 UnusedUpdSpace24[6]; + +/** Offset 0x0928 - BgpdtHash[4] + BgpdtHash values +**/ + UINT64 BgpdtHash[4]; + +/** Offset 0x0948 - BiosGuardAttr + BiosGuardAttr default values +**/ + UINT32 BiosGuardAttr; + +/** Offset 0x094C +**/ + UINT8 UnusedUpdSpace25[4]; + +/** Offset 0x0950 - BiosGuardModulePtr + BiosGuardModulePtr default values +**/ + UINT64 BiosGuardModulePtr; + +/** Offset 0x0958 - SendEcCmd + SendEcCmd function pointer. \n + @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE + EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode +**/ + UINT64 SendEcCmd; + +/** Offset 0x0960 - EcCmdProvisionEav + Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC +**/ + UINT8 EcCmdProvisionEav; + +/** Offset 0x0961 - EcCmdLock + EcCmdLock default values. Locks Ephemeral Authorization Value sent previously +**/ + UINT8 EcCmdLock; + +/** Offset 0x0962 +**/ + UINT8 UnusedUpdSpace26[6]; + +/** Offset 0x0968 - SgxEpoch0 + SgxEpoch0 default values +**/ + UINT64 SgxEpoch0; + +/** Offset 0x0970 - SgxEpoch1 + SgxEpoch1 default values +**/ + UINT64 SgxEpoch1; + +/** Offset 0x0978 - SgxSinitNvsData + SgxSinitNvsData default values +**/ + UINT8 SgxSinitNvsData; + +/** Offset 0x0979 - Si Config CSM Flag. + @deprecated Platform specific common policies that used by several silicon + components. CSM status flag. + $EN_DIS +**/ + UINT8 SiCsmFlag; + +/** Offset 0x097A - Skip Ssid Programming. + When set to TRUE, silicon code will not do any SSID programming and platform code + needs to handle that by itself properly. + $EN_DIS +**/ + UINT8 SiSkipSsidProgramming; + +/** Offset 0x097B +**/ + UINT8 UnusedUpdSpace27; + +/** Offset 0x097C - Change Default SVID + Change the default SVID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSvid; + +/** Offset 0x097E - Change Default SSID + Change the default SSID used in FSP to programming internal devices. This is only + valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiCustomizedSsid; + +/** Offset 0x0980 - SVID SDID table Poniter. + The address of the table of SVID SDID to customize each SVID SDID entry. This is + only valid when SkipSsidProgramming is FALSE. +**/ + UINT32 SiSsidTablePtr; + +/** Offset 0x0984 - Number of ssid table. + SiNumberOfSsidTableEntry should match the table entries created in SiSsidTablePtr. + This is only valid when SkipSsidProgramming is FALSE. +**/ + UINT16 SiNumberOfSsidTableEntry; + +/** Offset 0x0986 - USB2 Port Reset Message Enable + 0: Disable USB2 Port Reset Message; 1: Enable USB2 Port Reset Message +**/ + UINT8 PortResetMessageEnable[16]; + +/** Offset 0x0996 - SATA RST Interrupt Mode + Allowes to choose which interrupts will be implemented by SATA controller in RAID mode. + 0:Msix, 1:Msi, 2:Legacy +**/ + UINT8 SataRstInterrupt; + +/** Offset 0x0997 - ME Unconfig on RTC clear + 0: Disable ME Unconfig On Rtc Clear. 1: Enable ME Unconfig On Rtc Clear. + 2: Cmos is clear, status unkonwn. 3: Reserved + 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos + is clear, 3: Reserved +**/ + UINT8 MeUnconfigOnRtcClear; + +/** Offset 0x0998 - Enable PS_ON. + PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power + target that will be required by the California Energy Commission (CEC). When FALSE, + PS_ON is to be disabled. + $EN_DIS +**/ + UINT8 PsOnEnable; + +/** Offset 0x0999 - Pmc Cpu C10 Gate Pin Enable + Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO + and VccSTG rails instead of SLP_S0# pin. + $EN_DIS +**/ + UINT8 PmcCpuC10GatePinEnable; + +/** Offset 0x099A - Pch Dmi Aspm Ctrl + ASPM configuration on the PCH side of the DMI/OPI Link. Default is PchPcieAspmAutoConfig + 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto +**/ + UINT8 PchDmiAspmCtrl; + +/** Offset 0x099B - PchDmiCwbEnable + Central Write Buffer feature configurable and enabled by default + $EN_DIS +**/ + UINT8 PchDmiCwbEnable; + +/** Offset 0x099C - OS IDLE Mode Enable + Enable/Disable OS Idle Mode + $EN_DIS +**/ + UINT8 PmcOsIdleEnable; + +/** Offset 0x099D - S0ix Auto-Demotion + Enable/Disable the Low Power Mode Auto-Demotion Host Control feature. + $EN_DIS +**/ + UINT8 PchS0ixAutoDemotion; + +/** Offset 0x099E - Latch Events C10 Exit + When this bit is set to 1, SLP_S0# entry events in SLP_S0_DEBUG_REGx registers are + captured on C10 exit (instead of C10 entry which is default) + $EN_DIS +**/ + UINT8 PchPmLatchEventsC10Exit; + +/** Offset 0x099F - PCIE Eq Ph3 Lane Param Cm + CPU_PCIE_EQ_LANE_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieEqPh3LaneParamCm[32]; + +/** Offset 0x09BF - PCIE Eq Ph3 Lane Param Cp + CPU_PCIE_EQ_LANE_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieEqPh3LaneParamCp[32]; + +/** Offset 0x09DF - PCIE Hw Eq Gen3 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCm[5]; + +/** Offset 0x09E4 - PCIE Hw Eq Gen3 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen3CoeffListCp[5]; + +/** Offset 0x09E9 - PCIE Hw Eq Gen4 CoeffList Cm + CPU_PCIE_EQ_PARAM. Coefficient C-1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCm[5]; + +/** Offset 0x09EE - PCIE Hw Eq Gen4 CoeffList Cp + CPU_PCIE_EQ_PARAM. Coefficient C+1. +**/ + UINT8 CpuPcieHwEqGen4CoeffListCp[5]; + +/** Offset 0x09F3 - Gen3 Root port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen3RootPortPreset[20]; + +/** Offset 0x0A07 - Pcie Gen4 Root port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 8 is default + for each lane +**/ + UINT8 CpuPcieGen4RootPortPreset[20]; + +/** Offset 0x0A1B - Pcie Gen3 End port preset values per lane + Used for programming Pcie Gen3 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen3EndPointPreset[20]; + +/** Offset 0x0A2F - Pcie Gen4 End port preset values per lane + Used for programming Pcie Gen4 preset values per lane. Range: 0-9, 7 is default + for each lane +**/ + UINT8 CpuPcieGen4EndPointPreset[20]; + +/** Offset 0x0A43 - Pcie Gen3 End port Hint values per lane + Used for programming Pcie Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen3EndPointHint[20]; + +/** Offset 0x0A57 - Pcie Gen4 End port Hint values per lane + Used for programming Pcie Gen4 Hint values per lane. Range: 0-6, 2 is default for each lane +**/ + UINT8 CpuPcieGen4EndPointHint[20]; + +/** Offset 0x0A6B - CPU PCIe Fia Programming + Load Fia configuration if enable. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieFiaProgramming; + +/** Offset 0x0A6C - CPU PCIe RootPort Clock Gating + Describes whether the PCI Express Clock Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPcieClockGating; + +/** Offset 0x0A6D - CPU PCIe RootPort Power Gating + Describes whether the PCI Express Power Gating for each root port is enabled by + platform modules. 0: Disable; 1: Enable(Default). + $EN_DIS +**/ + UINT8 CpuPciePowerGating; + +/** Offset 0x0A6E - PCIE Compliance Test Mode + Compliance Test Mode shall be enabled when using Compliance Load Board. + $EN_DIS +**/ + UINT8 CpuPcieComplianceTestMode; + +/** Offset 0x0A6F - PCIE Secure Register Lock + Describes whether Secure Register Lock is enaled or disabled. When it will be enbaled, + load CpuPcieRpSetSecuredRegisterLock recipe. DEPRECATED 0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 CpuPcieSetSecuredRegisterLock; + +/** Offset 0x0A70 - PCIE Enable Peer Memory Write + This member describes whether Peer Memory Writes are enabled on the platform. + $EN_DIS +**/ + UINT8 CpuPcieEnablePeerMemoryWrite; + +/** Offset 0x0A71 - PCIE Rp Function Swap + Allows BIOS to use root port function number swapping when root port of function + 0 is disabled. + $EN_DIS +**/ + UINT8 CpuPcieRpFunctionSwap; + +/** Offset 0x0A72 - PCI Express Slot Selection + Select the PCIe M2 or CEMx4 slot.0: CEMx4 slot; 1: M2 slot(Default). + $EN_DIS +**/ + UINT8 CpuPcieSlotSelection; + +/** Offset 0x0A73 +**/ + UINT8 UnusedUpdSpace28; + +/** Offset 0x0A74 - CPU PCIE device override table pointer + The PCIe device table is being used to override PCIe device ASPM settings. This + is a pointer points to a 32bit address. And it's only used in PostMem phase. Please + refer to CPU_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId + must be 0. +**/ + UINT32 CpuPcieDeviceOverrideTablePtr; + +/** Offset 0x0A78 - Enable PCIE RP HotPlug + Indicate whether the root port is hot plug available. +**/ + UINT8 CpuPcieRpHotPlug[4]; + +/** Offset 0x0A7C - Enable PCIE RP Pm Sci + Indicate whether the root port power manager SCI is enabled. +**/ + UINT8 CpuPcieRpPmSci[4]; + +/** Offset 0x0A80 - Enable PCIE RP Transmitter Half Swing + Indicate whether the Transmitter Half Swing is enabled. +**/ + UINT8 CpuPcieRpTransmitterHalfSwing[4]; + +/** Offset 0x0A84 - PCIE RP Access Control Services Extended Capability + Enable/Disable PCIE RP Access Control Services Extended Capability +**/ + UINT8 CpuPcieRpAcsEnabled[4]; + +/** Offset 0x0A88 - PCIE RP Clock Power Management + Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal + can still be controlled by L1 PM substates mechanism +**/ + UINT8 CpuPcieRpEnableCpm[4]; + +/** Offset 0x0A8C - PCIE RP Advanced Error Report + Indicate whether the Advanced Error Reporting is enabled. +**/ + UINT8 CpuPcieRpAdvancedErrorReporting[4]; + +/** Offset 0x0A90 - PCIE RP Unsupported Request Report + Indicate whether the Unsupported Request Report is enabled. +**/ + UINT8 CpuPcieRpUnsupportedRequestReport[4]; + +/** Offset 0x0A94 - PCIE RP Fatal Error Report + Indicate whether the Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpFatalErrorReport[4]; + +/** Offset 0x0A98 - PCIE RP No Fatal Error Report + Indicate whether the No Fatal Error Report is enabled. +**/ + UINT8 CpuPcieRpNoFatalErrorReport[4]; + +/** Offset 0x0A9C - PCIE RP Correctable Error Report + Indicate whether the Correctable Error Report is enabled. +**/ + UINT8 CpuPcieRpCorrectableErrorReport[4]; + +/** Offset 0x0AA0 - PCIE RP System Error On Fatal Error + Indicate whether the System Error on Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnFatalError[4]; + +/** Offset 0x0AA4 - PCIE RP System Error On Non Fatal Error + Indicate whether the System Error on Non Fatal Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnNonFatalError[4]; + +/** Offset 0x0AA8 - PCIE RP System Error On Correctable Error + Indicate whether the System Error on Correctable Error is enabled. +**/ + UINT8 CpuPcieRpSystemErrorOnCorrectableError[4]; + +/** Offset 0x0AAC - PCIE RP Max Payload + Max Payload Size supported, Default 128B, see enum CPU_PCIE_MAX_PAYLOAD. +**/ + UINT8 CpuPcieRpMaxPayload[4]; + +/** Offset 0x0AB0 - DPC for PCIE RP Mask + Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcEnabled[4]; + +/** Offset 0x0AB4 - DPC Extensions PCIE RP Mask + Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpDpcExtensionsEnabled[4]; + +/** Offset 0x0AB8 - CPU PCIe root port connection type + 0: built-in device, 1:slot +**/ + UINT8 CpuPcieRpSlotImplemented[4]; + +/** Offset 0x0ABC - PCIE RP Gen3 Equalization Phase Method + PCIe Gen3 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen3EqPh3Method[4]; + +/** Offset 0x0AC0 - PCIE RP Gen4 Equalization Phase Method + PCIe Gen4 Eq Ph3 Method (see CPU_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization; + 1: hardware equalization; 4: Fixed Coeficients. +**/ + UINT8 CpuPcieRpGen4EqPh3Method[4]; + +/** Offset 0x0AC4 - PCIE RP Physical Slot Number + Indicates the slot number for the root port. Default is the value as root port index. +**/ + UINT8 CpuPcieRpPhysicalSlotNumber[4]; + +/** Offset 0x0AC8 - PCIE RP Aspm + The ASPM configuration of the root port (see: CPU_PCIE_ASPM_CONTROL).0: Disable; + 2: CpuPcieAspmL1(Default) +**/ + UINT8 CpuPcieRpAspm[4]; + +/** Offset 0x0ACC - PCIE RP L1 Substates + The L1 Substates configuration of the root port (see: CPU_PCIE_L1SUBSTATES_CONTROL). + Default is CpuPcieL1SubstatesL1_1_2. +**/ + UINT8 CpuPcieRpL1Substates[4]; + +/** Offset 0x0AD0 - PCIE RP Ltr Enable + Latency Tolerance Reporting Mechanism. +**/ + UINT8 CpuPcieRpLtrEnable[4]; + +/** Offset 0x0AD4 - PCIE RP Ltr Config Lock + 0: Disable; 1: Enable. +**/ + UINT8 CpuPcieRpLtrConfigLock[4]; + +/** Offset 0x0AD8 - PTM for PCIE RP Mask + Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. [ALIAS_NAME RpPtmBytes] +**/ + UINT8 CpuPcieRpPtmEnabled[4]; + +/** Offset 0x0ADC - PCIE RP Detect Timeout Ms + The number of milliseconds within 0~65535 in reference code will wait for link to + exit Detect state for enabled ports before assuming there is no device and potentially + disabling the port. +**/ + UINT16 CpuPcieRpDetectTimeoutMs[4]; + +/** Offset 0x0AE4 - VC for PCIE RP Mask + Enable/disable Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. One bit + for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpVcEnabled[4]; + +/** Offset 0x0AE8 - Multi-VC for PCIE RP Mask + Enable/disable Multiple Virtual Channel for PCIE Root Ports. 0: disable, 1: enable. + One bit for each port, bit0 for port1, bit1 for port2, and so on. +**/ + UINT8 CpuPcieRpMultiVcEnabled[4]; + +/** Offset 0x0AEC - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 3, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTranEnable[10]; + +/** Offset 0x0AF6 - USB 3.0 TX Output Unique Transition Bit Scale for rate 3 + USB 3.0 TX Output Unique Transition Bit Scale for rate 3, HSIO_TX_DWORD9[6:0], Default + = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate3UniqTran[10]; + +/** Offset 0x0B00 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 2, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTranEnable[10]; + +/** Offset 0x0B0A - USB 3.0 TX Output Unique Transition Bit Scale for rate 2 + USB 3.0 TX Output Unique Transition Bit Scale for rate 2, HSIO_TX_DWORD9[14:8], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate2UniqTran[10]; + +/** Offset 0x0B14 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 1, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTranEnable[10]; + +/** Offset 0x0B1E - USB 3.0 TX Output Unique Transition Bit Scale for rate 1 + USB 3.0 TX Output Unique Transition Bit Scale for rate 1, HSIO_TX_DWORD9[22:16], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate1UniqTran[10]; + +/** Offset 0x0B28 - Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0 + Enable the write to USB 3.0 TX Output Unique Transition Bit Mode for rate 0, Each + value in array can be between 0-1. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTranEnable[10]; + +/** Offset 0x0B32 - USB 3.0 TX Output Unique Transition Bit Scale for rate 0 + USB 3.0 TX Output Unique Transition Bit Scale for rate 0, HSIO_TX_DWORD9[30:24], + Default = 4Ch. One byte for each port. +**/ + UINT8 Usb3HsioTxRate0UniqTran[10]; + +/** Offset 0x0B3C - Skip PAM regsiter lock + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + $EN_DIS +**/ + UINT8 SkipPamLock; + +/** Offset 0x0B3D - EDRAM Test Mode + Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): + PAM registers will be locked by RC + 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode +**/ + UINT8 EdramTestMode; + +/** Offset 0x0B3E - Enable/Disable IGFX RenderStandby + Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby + $EN_DIS +**/ + UINT8 RenderStandby; + +/** Offset 0x0B3F - Enable/Disable IGFX PmSupport + Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport + $EN_DIS +**/ + UINT8 PmSupport; + +/** Offset 0x0B40 - Enable/Disable CdynmaxClamp + Enable: Enable CdynmaxClamp, Disable(Default): Disable CdynmaxClamp + $EN_DIS +**/ + UINT8 CdynmaxClampEnable; + +/** Offset 0x0B41 - GT Frequency Limit + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz + 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, + 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: + 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, + 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, + 0x18: 1200 Mhz +**/ + UINT8 GtFreqMax; + +/** Offset 0x0B42 - Disable Turbo GT + 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency + $EN_DIS +**/ + UINT8 DisableTurboGt; + +/** Offset 0x0B43 - Enable/Disable CdClock Init + Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full + CD clock if not initialized by Gfx PEIM + $EN_DIS +**/ + UINT8 SkipCdClockInit; + +/** Offset 0x0B44 - Enable RC1p frequency request to PMA (provided all other conditions are met) + 0(Default)=Disable, 1=Enable + $EN_DIS +**/ + UINT8 RC1pFreqEnable; + +/** Offset 0x0B45 - Enable TSN Multi-VC + Enable/disable Multi Virtual Channels(VC) in TSN. + $EN_DIS +**/ + UINT8 PchTsnMultiVcEnable; + +/** Offset 0x0B46 - SaPostMemTestRsvd + Reserved for SA Post-Mem Test + $EN_DIS +**/ + UINT8 SaPostMemTestRsvd[13]; + +/** Offset 0x0B53 - RSR feature + Enable or Disable RSR feature; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableRsr; + +/** Offset 0x0B54 - 1-Core Ratio Limit + 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal + to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit. Range is 0 to 83 +**/ + UINT8 OneCoreRatioLimit; + +/** Offset 0x0B55 - 2-Core Ratio Limit + 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 TwoCoreRatioLimit; + +/** Offset 0x0B56 - 3-Core Ratio Limit + 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 ThreeCoreRatioLimit; + +/** Offset 0x0B57 - 4-Core Ratio Limit + 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 +**/ + UINT8 FourCoreRatioLimit; + +/** Offset 0x0B58 - Enable or Disable HWP + Enable or Disable HWP(Hardware P states) Support. 0: Disable; 1: Enable; + 2-3:Reserved + $EN_DIS +**/ + UINT8 Hwp; + +/** Offset 0x0B59 - Hardware Duty Cycle Control + Hardware Duty Cycle Control configuration. 0: Disabled; 1: Enabled 2-3:Reserved + $EN_DIS +**/ + UINT8 HdcControl; + +/** Offset 0x0B5A - Package Long duration turbo mode time + Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds) + 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PowerLimit1Time; + +/** Offset 0x0B5B - Short Duration Turbo Mode + Enable or Disable short duration Turbo Mode. 0 : Disable; 1: Enable + $EN_DIS +**/ + UINT8 PowerLimit2; + +/** Offset 0x0B5C - Turbo settings Lock + Lock all Turbo settings Enable/Disable; 0: Disable , 1: Enable + $EN_DIS +**/ + UINT8 TurboPowerLimitLock; + +/** Offset 0x0B5D - Package PL3 time window + Package PL3 time window range for this policy from 0 to 64ms +**/ + UINT8 PowerLimit3Time; + +/** Offset 0x0B5E - Package PL3 Duty Cycle + Package PL3 Duty Cycle; Valid Range is 0 to 100 +**/ + UINT8 PowerLimit3DutyCycle; + +/** Offset 0x0B5F - Package PL3 Lock + Package PL3 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit3Lock; + +/** Offset 0x0B60 - Package PL4 Lock + Package PL4 Lock Enable/Disable; 0: Disable ; 1:Enable + $EN_DIS +**/ + UINT8 PowerLimit4Lock; + +/** Offset 0x0B61 - TCC Activation Offset + TCC Activation Offset. Offset from factory set TCC activation temperature at which + the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation + Temperature, in volts.For SKL Y SKU, the recommended default for this policy is + 10, For all other SKUs the recommended default are 0 +**/ + UINT8 TccActivationOffset; + +/** Offset 0x0B62 - Tcc Offset Clamp Enable/Disable + Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle + below P1.For SKL Y SKU, the recommended default for this policy is 1: Enabled, + For all other SKUs the recommended default are 0: Disabled. + $EN_DIS +**/ + UINT8 TccOffsetClamp; + +/** Offset 0x0B63 - Tcc Offset Lock + Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature + target; 0: Disabled; 1: Enabled. + $EN_DIS +**/ + UINT8 TccOffsetLock; + +/** Offset 0x0B64 - Custom Ratio State Entries + The number of custom ratio state entries, ranges from 0 to 40 for a valid custom + ratio table.Sets the number of custom P-states. At least 2 states must be present +**/ + UINT8 NumberOfEntries; + +/** Offset 0x0B65 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128 +**/ + UINT8 Custom1PowerLimit1Time; + +/** Offset 0x0B66 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255 +**/ + UINT8 Custom1TurboActivationRatio; + +/** Offset 0x0B67 - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom1ConfigTdpControl; + +/** Offset 0x0B68 - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128 +**/ + UINT8 Custom2PowerLimit1Time; + +/** Offset 0x0B69 - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255 +**/ + UINT8 Custom2TurboActivationRatio; + +/** Offset 0x0B6A - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom2ConfigTdpControl; + +/** Offset 0x0B6B - Custom Short term Power Limit time window + Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128 +**/ + UINT8 Custom3PowerLimit1Time; + +/** Offset 0x0B6C - Custom Turbo Activation Ratio + Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255 +**/ + UINT8 Custom3TurboActivationRatio; + +/** Offset 0x0B6D - Custom Config Tdp Control + Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2 +**/ + UINT8 Custom3ConfigTdpControl; + +/** Offset 0x0B6E - ConfigTdp mode settings Lock + Lock the ConfigTdp mode settings from runtime changes; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ConfigTdpLock; + +/** Offset 0x0B6F - Load Configurable TDP SSDT + Configure whether to load Configurable TDP SSDT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ConfigTdpBios; + +/** Offset 0x0B70 - PL1 Enable value + PL1 Enable value to limit average platform power. 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit1; + +/** Offset 0x0B71 - PL1 timewindow + PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16 + , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128 +**/ + UINT8 PsysPowerLimit1Time; + +/** Offset 0x0B72 - PL2 Enable Value + PL2 Enable activates the PL2 value to limit average platform power.0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PsysPowerLimit2; + +/** Offset 0x0B73 - Enable or Disable MLC Streamer Prefetcher + Enable or Disable MLC Streamer Prefetcher; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MlcStreamerPrefetcher; + +/** Offset 0x0B74 - Enable or Disable MLC Spatial Prefetcher + Enable or Disable MLC Spatial Prefetcher; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 MlcSpatialPrefetcher; + +/** Offset 0x0B75 - Enable or Disable Monitor /MWAIT instructions + Enable or Disable Monitor /MWAIT instructions; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MonitorMwaitEnable; + +/** Offset 0x0B76 - Enable or Disable initialization of machine check registers + Enable or Disable initialization of machine check registers; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MachineCheckEnable; + +/** Offset 0x0B77 - AP Idle Manner of waiting for SIPI + AP Idle Manner of waiting for SIPI; 1: HALT loop; 2: MWAIT loop; 3: RUN loop. + 1: HALT loop, 2: MWAIT loop, 3: RUN loop +**/ + UINT8 ApIdleManner; + +/** Offset 0x0B78 - Control on Processor Trace output scheme + Control on Processor Trace output scheme; 0: Single Range Output; 1: ToPA Output. + 0: Single Range Output, 1: ToPA Output +**/ + UINT8 ProcessorTraceOutputScheme; + +/** Offset 0x0B79 - Enable or Disable Processor Trace feature + Enable or Disable Processor Trace feature; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcessorTraceEnable; + +/** Offset 0x0B7A - Enable or Disable Intel SpeedStep Technology + Enable or Disable Intel SpeedStep Technology. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Eist; + +/** Offset 0x0B7B - Enable or Disable Energy Efficient P-state + Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientPState; + +/** Offset 0x0B7C - Enable or Disable Energy Efficient Turbo + Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable; + 1: Enable + $EN_DIS +**/ + UINT8 EnergyEfficientTurbo; + +/** Offset 0x0B7D - Enable or Disable T states + Enable or Disable T states; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 TStates; + +/** Offset 0x0B7E - Enable or Disable Bi-Directional PROCHOT# + Enable or Disable Bi-Directional PROCHOT#; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 BiProcHot; + +/** Offset 0x0B7F - Enable or Disable PROCHOT# signal being driven externally + Enable or Disable PROCHOT# signal being driven externally; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableProcHotOut; + +/** Offset 0x0B80 - Enable or Disable PROCHOT# Response + Enable or Disable PROCHOT# Response; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 ProcHotResponse; + +/** Offset 0x0B81 - Enable or Disable VR Thermal Alert + Enable or Disable VR Thermal Alert; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 DisableVrThermalAlert; + +/** Offset 0x0B82 - Enable or Disable Thermal Reporting + Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 EnableAllThermalFunctions; + +/** Offset 0x0B83 - Enable or Disable Thermal Monitor + Enable or Disable Thermal Monitor; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ThermalMonitor; + +/** Offset 0x0B84 - Enable or Disable CPU power states (C-states) + Enable or Disable CPU power states (C-states). 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 Cx; + +/** Offset 0x0B85 - Configure C-State Configuration Lock + Configure C-State Configuration Lock; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 PmgCstCfgCtrlLock; + +/** Offset 0x0B86 - Enable or Disable Enhanced C-states + Enable or Disable Enhanced C-states. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1e; + +/** Offset 0x0B87 - Enable or Disable Package Cstate Demotion + Enable or Disable Package Cstate Demotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateDemotion; + +/** Offset 0x0B88 - Enable or Disable Package Cstate UnDemotion + Enable or Disable Package Cstate UnDemotion. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 PkgCStateUnDemotion; + +/** Offset 0x0B89 - Enable or Disable CState-Pre wake + Enable or Disable CState-Pre wake. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 CStatePreWake; + +/** Offset 0x0B8A - Enable or Disable TimedMwait Support. + Enable or Disable TimedMwait Support. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 TimedMwait; + +/** Offset 0x0B8B - Enable or Disable IO to MWAIT redirection + Enable or Disable IO to MWAIT redirection; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 CstCfgCtrIoMwaitRedirection; + +/** Offset 0x0B8C - Set the Max Pkg Cstate + Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep + C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S , + 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto +**/ + UINT8 PkgCStateLimit; + +/** Offset 0x0B8D - TimeUnit for C-State Latency Control0 + TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl0TimeUnit; + +/** Offset 0x0B8E - TimeUnit for C-State Latency Control1 + TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl1TimeUnit; + +/** Offset 0x0B8F - TimeUnit for C-State Latency Control2 + TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl2TimeUnit; + +/** Offset 0x0B90 - TimeUnit for C-State Latency Control3 + TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl3TimeUnit; + +/** Offset 0x0B91 - TimeUnit for C-State Latency Control4 + Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl4TimeUnit; + +/** Offset 0x0B92 - TimeUnit for C-State Latency Control5 + TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns + , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns +**/ + UINT8 CstateLatencyControl5TimeUnit; + +/** Offset 0x0B93 - Interrupt Redirection Mode Select + Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;7: + No change. +**/ + UINT8 PpmIrmSetting; + +/** Offset 0x0B94 - Lock prochot configuration + Lock prochot configuration Enable/Disable; 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 ProcHotLock; + +/** Offset 0x0B95 - Configuration for boot TDP selection + Deprecated. Move to premem. +**/ + UINT8 DeprecatedConfigTdpLevel; + +/** Offset 0x0B96 - Max P-State Ratio + Max P-State Ratio, Valid Range 0 to 0x7F +**/ + UINT8 MaxRatio; + +/** Offset 0x0B97 - P-state ratios for custom P-state table + P-state ratios for custom P-state table. NumberOfEntries has valid range between + 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries] + are configurable. Valid Range of each entry is 0 to 0x7F +**/ + UINT8 StateRatio[40]; + +/** Offset 0x0BBF - P-state ratios for max 16 version of custom P-state table + P-state ratios for max 16 version of custom P-state table. This table is used for + OS versions limited to a max of 16 P-States. If the first entry of this table is + 0, or if Number of Entries is 16 or less, then this table will be ignored, and + up to the top 16 values of the StateRatio table will be used instead. Valid Range + of each entry is 0 to 0x7F +**/ + UINT8 StateRatioMax16[16]; + +/** Offset 0x0BCF +**/ + UINT8 UnusedUpdSpace29; + +/** Offset 0x0BD0 - Platform Power Pmax + PCODE MMIO Mailbox: Platform Power Pmax. 0 - Auto Specified in 1/8 Watt increments. + Range 0-1024 Watts. Value of 800 = 100W +**/ + UINT16 PsysPmax; + +/** Offset 0x0BD2 - Interrupt Response Time Limit of C-State LatencyContol1 + Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl1Irtl; + +/** Offset 0x0BD4 - Interrupt Response Time Limit of C-State LatencyContol2 + Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl2Irtl; + +/** Offset 0x0BD6 - Interrupt Response Time Limit of C-State LatencyContol3 + Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl3Irtl; + +/** Offset 0x0BD8 - Interrupt Response Time Limit of C-State LatencyContol4 + Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl4Irtl; + +/** Offset 0x0BDA - Interrupt Response Time Limit of C-State LatencyContol5 + Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF. + 0 is Auto. +**/ + UINT16 CstateLatencyControl5Irtl; + +/** Offset 0x0BDC - Package Long duration turbo mode power limit + Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit. + Valid Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit1; + +/** Offset 0x0BE0 - Package Short duration turbo mode power limit + Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit2Power; + +/** Offset 0x0BE4 - Package PL3 power limit + Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit3; + +/** Offset 0x0BE8 - Package PL4 power limit + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 PowerLimit4; + +/** Offset 0x0BEC - Tcc Offset Time Window for RATL + Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 TccOffsetTimeWindowForRatl; + +/** Offset 0x0BF0 - Short term Power Limit value for custom cTDP level 1 + Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit1; + +/** Offset 0x0BF4 - Long term Power Limit value for custom cTDP level 1 + Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom1PowerLimit2; + +/** Offset 0x0BF8 - Short term Power Limit value for custom cTDP level 2 + Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit1; + +/** Offset 0x0BFC - Long term Power Limit value for custom cTDP level 2 + Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom2PowerLimit2; + +/** Offset 0x0C00 - Short term Power Limit value for custom cTDP level 3 + Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit1; + +/** Offset 0x0C04 - Long term Power Limit value for custom cTDP level 3 + Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid + Range 0 to 4095875 in Step size of 125 +**/ + UINT32 Custom3PowerLimit2; + +/** Offset 0x0C08 - Platform PL1 power + Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit1Power; + +/** Offset 0x0C0C - Platform PL2 power + Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range + 0 to 4095875 in Step size of 125 +**/ + UINT32 PsysPowerLimit2Power; + +/** Offset 0x0C10 - Race To Halt + Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency + in order to enter pkg C-State faster to reduce overall power. (RTH is controlled + through MSR 1FC bit 20)Disable; 1: Enable + $EN_DIS +**/ + UINT8 RaceToHalt; + +/** Offset 0x0C11 - Set Three Strike Counter Disable + False (default): Three Strike counter will be incremented and True: Prevents Three + Strike counter from incrementing; 0: False; 1: True. + 0: False, 1: True +**/ + UINT8 ThreeStrikeCounterDisable; + +/** Offset 0x0C12 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT + Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 HwpInterruptControl; + +/** Offset 0x0C13 - 5-Core Ratio Limit + 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 FiveCoreRatioLimit; + +/** Offset 0x0C14 - 6-Core Ratio Limit + 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SixCoreRatioLimit; + +/** Offset 0x0C15 - 7-Core Ratio Limit + 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 SevenCoreRatioLimit; + +/** Offset 0x0C16 - 8-Core Ratio Limit + 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused + 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal + to 1-Core Ratio Limit.Range is 0 to 83 + 0x0:0xFF +**/ + UINT8 EightCoreRatioLimit; + +/** Offset 0x0C17 - Intel Turbo Boost Max Technology 3.0 + Intel Turbo Boost Max Technology 3.0. 0: Disabled; 1: Enabled + $EN_DIS +**/ + UINT8 EnableItbm; + +/** Offset 0x0C18 - Intel Turbo Boost Max Technology 3.0 Driver + @Deprecated: Intel Turbo Boost Max Technology 3.0 Driver doesn't support for TGL + $EN_DIS +**/ + UINT8 EnableItbmDriver; + +/** Offset 0x0C19 - Enable or Disable C1 Cstate Demotion + Enable or Disable C1 Cstate Demotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateAutoDemotion; + +/** Offset 0x0C1A - Enable or Disable C1 Cstate UnDemotion + Enable or Disable C1 Cstate UnDemotion. Disable; 1: Enable + $EN_DIS +**/ + UINT8 C1StateUnDemotion; + +/** Offset 0x0C1B - Minimum Ring ratio limit override + Minimum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MinRingRatioLimit; + +/** Offset 0x0C1C - Maximum Ring ratio limit override + Maximum Ring ratio limit override. 0: Hardware defaults. Range: 0 - Max turbo + ratio limit +**/ + UINT8 MaxRingRatioLimit; + +/** Offset 0x0C1D - Enable or Disable Per Core P State OS control + Enable or Disable Per Core P State OS control. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnablePerCorePState; + +/** Offset 0x0C1E - Enable or Disable HwP Autonomous Per Core P State OS control + Enable or Disable HwP Autonomous Per Core P State OS control. 0: Disable; 1: + Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoPerCorePstate; + +/** Offset 0x0C1F - Enable or Disable HwP Autonomous EPP Grouping + Enable or Disable HwP Autonomous EPP Grouping. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableHwpAutoEppGrouping; + +/** Offset 0x0C20 - Enable or Disable EPB override over PECI + Enable or Disable EPB override over PECI. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableEpbPeciOverride; + +/** Offset 0x0C21 - Enable or Disable Fast MSR for IA32_HWP_REQUEST + Enable or Disable Fast MSR for IA32_HWP_REQUEST. 0: Disable; 1: Enable + $EN_DIS +**/ + UINT8 EnableFastMsrHwpReq; + +/** Offset 0x0C22 - Enable Configurable TDP + Applies TDP initialization settings based on non-cTDP or cTDP.; 0: Applies to non-cTDP; + 1: Applies to cTDP + $EN_DIS +**/ + UINT8 ApplyConfigTdp; + +/** Offset 0x0C23 - Enable VccIn Demotion Override Configuration + Enable VccIn Demotion Override Configuration. The timing can be configured by VccInDemotionMs. + $EN_DIS +**/ + UINT8 VccInDemotionOverride; + +/** Offset 0x0C24 - Customize the VccIn Demotion in ms. + Customize the VccIn Demotion in ms accordingly. Values used by OEM expected to be + in lower end of 1-30 ms range. Value 1 means 1ms, value 2 means 2ms, and so on. + Value 0 will disable VccIn Demotion knob. It's 30ms by silicon default +**/ + UINT32 VccInDemotionMs; + +/** Offset 0x0C28 - ReservedCpuPostMemTest + Reserved for CPU Post-Mem Test + $EN_DIS +**/ + UINT8 ReservedCpuPostMemTest[11]; + +/** Offset 0x0C33 - SgxSinitDataFromTpm + SgxSinitDataFromTpm default values +**/ + UINT8 SgxSinitDataFromTpm; + +/** Offset 0x0C34 +**/ + UINT8 SecurityPostMemRsvd[16]; + +/** Offset 0x0C44 - End of Post message + Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): + EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE + 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved +**/ + UINT8 EndOfPostMessage; + +/** Offset 0x0C45 - D0I3 Setting for HECI Disable + Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all + HECI devices + $EN_DIS +**/ + UINT8 DisableD0I3SettingForHeci; + +/** Offset 0x0C46 - Enable LOCKDOWN SMI + Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. + $EN_DIS +**/ + UINT8 PchLockDownGlobalSmi; + +/** Offset 0x0C47 - Enable LOCKDOWN BIOS Interface + Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. + $EN_DIS +**/ + UINT8 PchLockDownBiosInterface; + +/** Offset 0x0C48 - Unlock all GPIO pads + Force all GPIO pads to be unlocked for debug purpose. + $EN_DIS +**/ + UINT8 PchUnlockGpioPads; + +/** Offset 0x0C49 - PCH Unlock SideBand access + The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before + 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access. + $EN_DIS +**/ + UINT8 PchSbAccessUnlock; + +/** Offset 0x0C4A - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 PcieRpLtrMaxSnoopLatency[24]; + +/** Offset 0x0C7A - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 PcieRpLtrMaxNoSnoopLatency[24]; + +/** Offset 0x0CAA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 PcieRpSnoopLatencyOverrideMode[24]; + +/** Offset 0x0CC2 - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0CDA - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 PcieRpSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D0A - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMode[24]; + +/** Offset 0x0D22 - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24]; + +/** Offset 0x0D3A - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 PcieRpNonSnoopLatencyOverrideValue[24]; + +/** Offset 0x0D6A - PCIE RP Slot Power Limit Scale + Specifies scale used for slot power limit value. Leave as 0 to set to default. +**/ + UINT8 PcieRpSlotPowerLimitScale[24]; + +/** Offset 0x0D82 - PCIE RP Slot Power Limit Value + Specifies upper limit on power supplie by slot. Leave as 0 to set to default. +**/ + UINT16 PcieRpSlotPowerLimitValue[24]; + +/** Offset 0x0DB2 - PCIE RP Enable Port8xh Decode + This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable; + 1: Enable. + $EN_DIS +**/ + UINT8 PcieEnablePort8xhDecode; + +/** Offset 0x0DB3 - PCIE Port8xh Decode Port Index + The Index of PCIe Port that is selected for Port8xh Decode (0 Based). +**/ + UINT8 PchPciePort8xhDecodePortIndex; + +/** Offset 0x0DB4 - PCH Energy Reporting + Disable/Enable PCH to CPU energy report feature. + $EN_DIS +**/ + UINT8 PchPmDisableEnergyReport; + +/** Offset 0x0DB5 - PCH Sata Test Mode + Allow entrance to the PCH SATA test modes. + $EN_DIS +**/ + UINT8 SataTestMode; + +/** Offset 0x0DB6 - PCH USB OverCurrent mapping lock enable + If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning + that OC mapping data will be consumed by xHCI and OC mapping registers will be locked. + $EN_DIS +**/ + UINT8 PchXhciOcLock; + +/** Offset 0x0DB7 - Low Power Mode Enable/Disable config mask + Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds + to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, + LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. [ALIAS_NAME LpmStateEnableMask] +**/ + UINT8 PmcLpmS0ixSubStateEnableMask; + +/** Offset 0x0DB8 - Mctp Broadcast Cycle + Test, Determine if MCTP Broadcast is enabled 0: Disable; 1: Enable. + $EN_DIS +**/ + UINT8 MctpBroadcastCycle; + +/** Offset 0x0DB9 +**/ + UINT8 UnusedUpdSpace30[1]; + +/** Offset 0x0DBA - PCIE RP Ltr Max Snoop Latency + Latency Tolerance Reporting, Max Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxSnoopLatency[4]; + +/** Offset 0x0DC2 - PCIE RP Ltr Max No Snoop Latency + Latency Tolerance Reporting, Max Non-Snoop Latency. +**/ + UINT16 CpuPcieRpLtrMaxNoSnoopLatency[4]; + +/** Offset 0x0DCA - PCIE RP Snoop Latency Override Mode + Latency Tolerance Reporting, Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DCE - PCIE RP Snoop Latency Override Multiplier + Latency Tolerance Reporting, Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DD2 - PCIE RP Snoop Latency Override Value + Latency Tolerance Reporting, Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DDA - PCIE RP Non Snoop Latency Override Mode + Latency Tolerance Reporting, Non-Snoop Latency Override Mode. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMode[4]; + +/** Offset 0x0DDE - PCIE RP Non Snoop Latency Override Multiplier + Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier. +**/ + UINT8 CpuPcieRpNonSnoopLatencyOverrideMultiplier[4]; + +/** Offset 0x0DE2 - PCIE RP Non Snoop Latency Override Value + Latency Tolerance Reporting, Non-Snoop Latency Override Value. +**/ + UINT16 CpuPcieRpNonSnoopLatencyOverrideValue[4]; + +/** Offset 0x0DEA - PCIE RP Upstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Uptp[4]; + +/** Offset 0x0DEE - PCIE RP Downstream Port Transmiter Preset + Used during Gen3 Link Equalization. Used for all lanes. Default is 7. +**/ + UINT8 CpuPcieRpGen3Dptp[4]; + +/** Offset 0x0DF2 - PCIE RP Upstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 8. +**/ + UINT8 CpuPcieRpGen4Uptp[4]; + +/** Offset 0x0DF6 - PCIE RP Downstream Port Transmiter Preset + Used during Gen4 Link Equalization. Used for all lanes. Default is 9. +**/ + UINT8 CpuPcieRpGen4Dptp[4]; + +/** Offset 0x0DFA - PMC C10 dynamic threshold dajustment enable + Set if you want to enable PMC C10 dynamic threshold adjustment. Only works on supported SKUs + $EN_DIS +**/ + UINT8 PmcC10DynamicThresholdAdjustment; + +/** Offset 0x0DFB - FOMS Control Policy + Choose the Foms Control Policy, Default = 0 + 0: Auto, 1: Gen3 Foms, 2: Gen4 Foms, 3: Gen3 and Gen4 Foms +**/ + UINT8 CpuPcieFomsCp[4]; + +/** Offset 0x0DFF +**/ + UINT8 UnusedUpdSpace31; + +/** Offset 0x0E00 - LogoPixelHeight Address + Address of LogoPixelHeight +**/ + UINT32 LogoPixelHeight; + +/** Offset 0x0E04 - LogoPixelWidth Address + Address of LogoPixelWidth +**/ + UINT32 LogoPixelWidth; + +/** Offset 0x0E08 - P2P mode for PCIE RP + Enable/disable peer to peer mode for PCIE Root Ports. 0: Disable, 1: Enable. + 0: Disable, 1: Enable +**/ + UINT8 CpuPcieRpPeerToPeerMode[4]; + +/** Offset 0x0E0C - Map port under VMD + Map/UnMap port under VMD + $EN_DIS +**/ + UINT8 VmdPort[31]; + +/** Offset 0x0E2B - VMD Port Device + VMD Root port device number. +**/ + UINT8 VmdPortDev[31]; + +/** Offset 0x0E4A - VMD Port Func + VMD Root port function number. +**/ + UINT8 VmdPortFunc[31]; + +/** Offset 0x0E69 +**/ + UINT8 UnusedUpdSpace32[3]; + +/** Offset 0x0E6C - VMD Variable + VMD Variable Pointer. +**/ + UINT32 VmdVariablePtr; + +/** Offset 0x0E70 - Thermal Design Current time window + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 TdcTimeWindow1[5]; + +/** Offset 0x0E84 - Temporary CfgBar address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdCfgBarBase; + +/** Offset 0x0E88 - Temporary MemBar1 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar1Base; + +/** Offset 0x0E8C - Temporary MemBar2 address for VMD + PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds. + Range 1ms to 448s +**/ + UINT32 VmdMemBar2Base; + +/** Offset 0x0E90 - PCH TSN1 MAC Address High Bits + Set TSN1 MAC Address High. +**/ + UINT32 PchTsn1MacAddressHigh; + +/** Offset 0x0E94 - PCH TSN1 MAC Address Low Bits + Set TSN1 MAC Address Low. +**/ + UINT32 PchTsn1MacAddressLow; + +/** Offset 0x0E98 - FspEventHandler + Optional pointer to the boot loader's implementation of FSP_EVENT_HANDLER. +**/ + UINT32 FspEventHandler; + +/** Offset 0x0E9C - Enable VMD Global Mapping + Enable/disable to VMD controller.0: Disable(Default); 1: Enable + $EN_DIS +**/ + UINT8 VmdGlobalMapping; + +/** Offset 0x0E9D +**/ + UINT8 UnusedUpdSpace33[3]; + +/** Offset 0x0EA0 +**/ + UINT8 ReservedFspsUpd[8]; +} FSP_S_CONFIG; + +/** Fsp S UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSP_S_CONFIG FspsConfig; + +/** Offset 0x0EA8 +**/ + UINT8 UnusedUpdSpace34[6]; + +/** Offset 0x0EAE +**/ + UINT16 UpdTerminator; +} FSPS_UPD; + +#pragma pack() + +#endif diff --git a/models/lemp10/FSP/Include/FsptUpd.h b/models/lemp10/FSP/Include/FsptUpd.h new file mode 100644 index 0000000..593ecf4 --- /dev/null +++ b/models/lemp10/FSP/Include/FsptUpd.h @@ -0,0 +1,311 @@ +/** @file + +Copyright (c) 2020, Intel Corporation. All rights reserved.
+ +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __FSPTUPD_H__ +#define __FSPTUPD_H__ + +#include + +#pragma pack(1) + + +/** Fsp T Core UPD +**/ +typedef struct { + +/** Offset 0x0020 +**/ + UINT32 MicrocodeRegionBase; + +/** Offset 0x0024 +**/ + UINT32 MicrocodeRegionSize; + +/** Offset 0x0028 +**/ + UINT32 CodeRegionBase; + +/** Offset 0x002C +**/ + UINT32 CodeRegionSize; + +/** Offset 0x0030 +**/ + UINT8 Reserved[16]; +} FSPT_CORE_UPD; + +/** Fsp T Configuration +**/ +typedef struct { + +/** Offset 0x0040 - PcdSerialIoUartDebugEnable + Enable SerialIo Uart debug library with/without initializing SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIoUartDebugEnable; + +/** Offset 0x0041 - PcdSerialIoUartNumber + Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT + Core interface, it cannot be used for debug purpose. + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIoUartNumber; + +/** Offset 0x0042 - PcdSerialIoUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIoUartMode; + +/** Offset 0x0043 +**/ + UINT8 UnusedUpdSpace0; + +/** Offset 0x0044 - PcdSerialIoUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIoUartBaudRate; + +/** Offset 0x0048 - Pci Express Base Address + Base address to be programmed for Pci Express +**/ + UINT64 PcdPciExpressBaseAddress; + +/** Offset 0x0050 - Pci Express Region Length + Region Length to be programmed for Pci Express +**/ + UINT32 PcdPciExpressRegionLength; + +/** Offset 0x0054 - PcdSerialIoUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIoUartParity; + +/** Offset 0x0055 - PcdSerialIoUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIoUartDataBits; + +/** Offset 0x0056 - PcdSerialIoUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIoUartStopBits; + +/** Offset 0x0057 - PcdSerialIoUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIoUartAutoFlow; + +/** Offset 0x0058 - PcdSerialIoUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartRxPinMux; + +/** Offset 0x005C - PcdSerialIoUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART used for debug +**/ + UINT32 PcdSerialIoUartTxPinMux; + +/** Offset 0x0060 - PcdSerialIoUartRtsPinMux - FSPT + Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIoUartRtsPinMux; + +/** Offset 0x0064 - PcdSerialIoUartCtsPinMux - FSPT + Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIoUartCtsPinMux; + +/** Offset 0x0068 - PcdSerialIoUartDebugMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIoUartDebugMmioBase; + +/** Offset 0x006C - PcdLpcUartDebugEnable + Enable to initialize LPC Uart device in FSP. + 0:Disable, 1:Enable +**/ + UINT8 PcdLpcUartDebugEnable; + +/** Offset 0x006D - Debug Interfaces + Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, + BIT2 - Not used. +**/ + UINT8 PcdDebugInterfaceFlags; + +/** Offset 0x006E - PcdSerialDebugLevel + Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, + Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, + Info & Verbose. + 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load + Error Warnings and Info, 5:Load Error Warnings Info and Verbose +**/ + UINT8 PcdSerialDebugLevel; + +/** Offset 0x006F - ISA Serial Base selection + Select ISA Serial Base address. Default is 0x3F8. + 0:0x3F8, 1:0x2F8 +**/ + UINT8 PcdIsaSerialUartBase; + +/** Offset 0x0070 - PcdSerialIo2ndUartEnable + Enable Additional SerialIo Uart device in FSP. + 0:Disable, 1:Enable and Initialize, 2:Enable without Initializing +**/ + UINT8 PcdSerialIo2ndUartEnable; + +/** Offset 0x0071 - PcdSerialIo2ndUartNumber + Select SerialIo Uart Controller Number + 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 +**/ + UINT8 PcdSerialIo2ndUartNumber; + +/** Offset 0x0072 - PcdSerialIo2ndUartMode - FSPT + Select SerialIo Uart Controller mode + 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, + 4:SerialIoUartSkipInit +**/ + UINT8 PcdSerialIo2ndUartMode; + +/** Offset 0x0073 +**/ + UINT8 UnusedUpdSpace1; + +/** Offset 0x0074 - PcdSerialIo2ndUartBaudRate - FSPT + Set default BaudRate Supported from 0 - default to 6000000 +**/ + UINT32 PcdSerialIo2ndUartBaudRate; + +/** Offset 0x0078 - PcdSerialIo2ndUartParity - FSPT + Set default Parity. + 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity +**/ + UINT8 PcdSerialIo2ndUartParity; + +/** Offset 0x0079 - PcdSerialIo2ndUartDataBits - FSPT + Set default word length. 0: Default, 5,6,7,8 +**/ + UINT8 PcdSerialIo2ndUartDataBits; + +/** Offset 0x007A - PcdSerialIo2ndUartStopBits - FSPT + Set default stop bits. + 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits +**/ + UINT8 PcdSerialIo2ndUartStopBits; + +/** Offset 0x007B - PcdSerialIo2ndUartAutoFlow - FSPT + Enables UART hardware flow control, CTS and RTS lines. + 0: Disable, 1:Enable +**/ + UINT8 PcdSerialIo2ndUartAutoFlow; + +/** Offset 0x007C - PcdSerialIo2ndUartRxPinMux - FSPT + Select RX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartRxPinMux; + +/** Offset 0x0080 - PcdSerialIo2ndUartTxPinMux - FSPT + Select TX pin muxing for SerialIo UART +**/ + UINT32 PcdSerialIo2ndUartTxPinMux; + +/** Offset 0x0084 - PcdSerialIo2ndUartRtsPinMux - FSPT + Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartRtsPinMux; + +/** Offset 0x0088 - PcdSerialIo2ndUartCtsPinMux - FSPT + Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* + for possible values. +**/ + UINT32 PcdSerialIo2ndUartCtsPinMux; + +/** Offset 0x008C - PcdSerialIo2ndUartMmioBase - FSPT + Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIo2ndUartMode + = SerialIoUartPci. +**/ + UINT32 PcdSerialIo2ndUartMmioBase; + +/** Offset 0x0090 +**/ + UINT32 TopMemoryCacheSize; + +/** Offset 0x0094 - FspDebugHandler + Optional pointer to the boot loader's implementation of FSP_DEBUG_HANDLER. +**/ + UINT32 FspDebugHandler; + +/** Offset 0x0098 +**/ + UINT8 UnusedUpdSpace2[4]; + +/** Offset 0x009C +**/ + UINT8 ReservedFsptUpd1[20]; +} FSP_T_CONFIG; + +/** Fsp T UPD Configuration +**/ +typedef struct { + +/** Offset 0x0000 +**/ + FSP_UPD_HEADER FspUpdHeader; + +/** Offset 0x0020 +**/ + FSPT_CORE_UPD FsptCoreUpd; + +/** Offset 0x0040 +**/ + FSP_T_CONFIG FsptConfig; + +/** Offset 0x00B0 +**/ + UINT8 UnusedUpdSpace3[6]; + +/** Offset 0x00B6 +**/ + UINT16 UpdTerminator; +} FSPT_UPD; + +#pragma pack() + +#endif diff --git a/models/lemp10/FSP/Include/FusaInfoHob.h b/models/lemp10/FSP/Include/FusaInfoHob.h new file mode 100644 index 0000000..0d6a953 --- /dev/null +++ b/models/lemp10/FSP/Include/FusaInfoHob.h @@ -0,0 +1,161 @@ +/** @file + This file contains definitions required for creation of TGL + end-to-end check-the-checker test result hob. + +@copyright + INTEL CONFIDENTIAL Copyright 2020 Intel Corporation. + + The source code contained or described herein and all documents related to the + source code ("Material") are owned by Intel Corporation or its suppliers or + licensors. Title to the Material remains with Intel Corporation or its suppliers + and licensors. The Material may contain trade secrets and proprietary and + confidential information of Intel Corporation and its suppliers and licensors, + and is protected by worldwide copyright and trade secret laws and treaty + provisions. No part of the Material may be used, copied, reproduced, modified, + published, uploaded, posted, transmitted, distributed, or disclosed in any way + without Intel's prior express written permission. + + No license under any patent, copyright, trade secret or other intellectual + property right is granted to or conferred upon you by disclosure or delivery + of the Materials, either expressly, by implication, inducement, estoppel or + otherwise. Any license under such intellectual property rights must be + express and approved by Intel in writing. + + Unless otherwise agreed by Intel in writing, you may not remove or alter + this notice or any other notice embedded in Materials by Intel or + Intel's suppliers or licensors in any way. + + This file contains an 'Intel Peripheral Driver' and is uniquely identified as + "Intel Reference Module" and is licensed for Intel CPUs and chipsets under + the terms of your license agreement with Intel or your vendor. This file may + be modified by the user, subject to additional terms of the license agreement. + +@par Specification Reference: +**/ +#ifndef _FUSA_INFO_HOB_H_ +#define _FUSA_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiFusaInfoGuid; + +/** + FuSa Info HOB version + Use this to compare to the HOB retrieved from the FSP for the + exact match +**/ +#define FUSA_INFO_VERSION 0x00000100 + +/** Constants used for FUSA_TEST_RESULT->CheckResults[] and + * FUSA_TEST_RESULT->TestResult */ +/**@defgroup ResultConstant Check Result Constants*/ +/**@{*/ +#define FUSA_TEST_DEVICE_NOTAVAILABLE 0xFF /**TestNumber will have this value. + + @note While the core4-7 (cbo4-7) that are strictly related to + the TGL-H are listed, there are not within the + implementation scope and validation scope yet. +**/ +typedef enum +{ + FusaTestNumMc0Cmi = 0, /// + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +* Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +* Redistributions in binary form must reproduce the above copyright notice, this + list of conditions and the following disclaimer in the documentation and/or + other materials provided with the distribution. +* Neither the name of Intel Corporation nor the names of its contributors may + be used to endorse or promote products derived from this software without + specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + THE POSSIBILITY OF SUCH DAMAGE. + + This file is automatically generated. Please do NOT modify !!! + +**/ + +#ifndef __GPIOCONFIG_H__ +#define __GPIOCONFIG_H__ +#include +#include +#include + +/* + SKL LP GPIO pins + Use below for functions from PCH GPIO Lib which + require GpioPad as argument. Encoding used here + has all information required by library functions +*/ +#define GPIO_SKL_LP_GPP_A0 0x02000000 +#define GPIO_SKL_LP_GPP_A1 0x02000001 +#define GPIO_SKL_LP_GPP_A2 0x02000002 +#define GPIO_SKL_LP_GPP_A3 0x02000003 +#define GPIO_SKL_LP_GPP_A4 0x02000004 +#define GPIO_SKL_LP_GPP_A5 0x02000005 +#define GPIO_SKL_LP_GPP_A6 0x02000006 +#define GPIO_SKL_LP_GPP_A7 0x02000007 +#define GPIO_SKL_LP_GPP_A8 0x02000008 +#define GPIO_SKL_LP_GPP_A9 0x02000009 +#define GPIO_SKL_LP_GPP_A10 0x0200000A +#define GPIO_SKL_LP_GPP_A11 0x0200000B +#define GPIO_SKL_LP_GPP_A12 0x0200000C +#define GPIO_SKL_LP_GPP_A13 0x0200000D +#define GPIO_SKL_LP_GPP_A14 0x0200000E +#define GPIO_SKL_LP_GPP_A15 0x0200000F +#define GPIO_SKL_LP_GPP_A16 0x02000010 +#define GPIO_SKL_LP_GPP_A17 0x02000011 +#define GPIO_SKL_LP_GPP_A18 0x02000012 +#define GPIO_SKL_LP_GPP_A19 0x02000013 +#define GPIO_SKL_LP_GPP_A20 0x02000014 +#define GPIO_SKL_LP_GPP_A21 0x02000015 +#define GPIO_SKL_LP_GPP_A22 0x02000016 +#define GPIO_SKL_LP_GPP_A23 0x02000017 +#define GPIO_SKL_LP_GPP_B0 0x02010000 +#define GPIO_SKL_LP_GPP_B1 0x02010001 +#define GPIO_SKL_LP_GPP_B2 0x02010002 +#define GPIO_SKL_LP_GPP_B3 0x02010003 +#define GPIO_SKL_LP_GPP_B4 0x02010004 +#define GPIO_SKL_LP_GPP_B5 0x02010005 +#define GPIO_SKL_LP_GPP_B6 0x02010006 +#define GPIO_SKL_LP_GPP_B7 0x02010007 +#define GPIO_SKL_LP_GPP_B8 0x02010008 +#define GPIO_SKL_LP_GPP_B9 0x02010009 +#define GPIO_SKL_LP_GPP_B10 0x0201000A +#define GPIO_SKL_LP_GPP_B11 0x0201000B +#define GPIO_SKL_LP_GPP_B12 0x0201000C +#define GPIO_SKL_LP_GPP_B13 0x0201000D +#define GPIO_SKL_LP_GPP_B14 0x0201000E +#define GPIO_SKL_LP_GPP_B15 0x0201000F +#define GPIO_SKL_LP_GPP_B16 0x02010010 +#define GPIO_SKL_LP_GPP_B17 0x02010011 +#define GPIO_SKL_LP_GPP_B18 0x02010012 +#define GPIO_SKL_LP_GPP_B19 0x02010013 +#define GPIO_SKL_LP_GPP_B20 0x02010014 +#define GPIO_SKL_LP_GPP_B21 0x02010015 +#define GPIO_SKL_LP_GPP_B22 0x02010016 +#define GPIO_SKL_LP_GPP_B23 0x02010017 +#define GPIO_SKL_LP_GPP_C0 0x02020000 +#define GPIO_SKL_LP_GPP_C1 0x02020001 +#define GPIO_SKL_LP_GPP_C2 0x02020002 +#define GPIO_SKL_LP_GPP_C3 0x02020003 +#define GPIO_SKL_LP_GPP_C4 0x02020004 +#define GPIO_SKL_LP_GPP_C5 0x02020005 +#define GPIO_SKL_LP_GPP_C6 0x02020006 +#define GPIO_SKL_LP_GPP_C7 0x02020007 +#define GPIO_SKL_LP_GPP_C8 0x02020008 +#define GPIO_SKL_LP_GPP_C9 0x02020009 +#define GPIO_SKL_LP_GPP_C10 0x0202000A +#define GPIO_SKL_LP_GPP_C11 0x0202000B +#define GPIO_SKL_LP_GPP_C12 0x0202000C +#define GPIO_SKL_LP_GPP_C13 0x0202000D +#define GPIO_SKL_LP_GPP_C14 0x0202000E +#define GPIO_SKL_LP_GPP_C15 0x0202000F +#define GPIO_SKL_LP_GPP_C16 0x02020010 +#define GPIO_SKL_LP_GPP_C17 0x02020011 +#define GPIO_SKL_LP_GPP_C18 0x02020012 +#define GPIO_SKL_LP_GPP_C19 0x02020013 +#define GPIO_SKL_LP_GPP_C20 0x02020014 +#define GPIO_SKL_LP_GPP_C21 0x02020015 +#define GPIO_SKL_LP_GPP_C22 0x02020016 +#define GPIO_SKL_LP_GPP_C23 0x02020017 +#define GPIO_SKL_LP_GPP_D0 0x02030000 +#define GPIO_SKL_LP_GPP_D1 0x02030001 +#define GPIO_SKL_LP_GPP_D2 0x02030002 +#define GPIO_SKL_LP_GPP_D3 0x02030003 +#define GPIO_SKL_LP_GPP_D4 0x02030004 +#define GPIO_SKL_LP_GPP_D5 0x02030005 +#define GPIO_SKL_LP_GPP_D6 0x02030006 +#define GPIO_SKL_LP_GPP_D7 0x02030007 +#define GPIO_SKL_LP_GPP_D8 0x02030008 +#define GPIO_SKL_LP_GPP_D9 0x02030009 +#define GPIO_SKL_LP_GPP_D10 0x0203000A +#define GPIO_SKL_LP_GPP_D11 0x0203000B +#define GPIO_SKL_LP_GPP_D12 0x0203000C +#define GPIO_SKL_LP_GPP_D13 0x0203000D +#define GPIO_SKL_LP_GPP_D14 0x0203000E +#define GPIO_SKL_LP_GPP_D15 0x0203000F +#define GPIO_SKL_LP_GPP_D16 0x02030010 +#define GPIO_SKL_LP_GPP_D17 0x02030011 +#define GPIO_SKL_LP_GPP_D18 0x02030012 +#define GPIO_SKL_LP_GPP_D19 0x02030013 +#define GPIO_SKL_LP_GPP_D20 0x02030014 +#define GPIO_SKL_LP_GPP_D21 0x02030015 +#define GPIO_SKL_LP_GPP_D22 0x02030016 +#define GPIO_SKL_LP_GPP_D23 0x02030017 +#define GPIO_SKL_LP_GPP_E0 0x02040000 +#define GPIO_SKL_LP_GPP_E1 0x02040001 +#define GPIO_SKL_LP_GPP_E2 0x02040002 +#define GPIO_SKL_LP_GPP_E3 0x02040003 +#define GPIO_SKL_LP_GPP_E4 0x02040004 +#define GPIO_SKL_LP_GPP_E5 0x02040005 +#define GPIO_SKL_LP_GPP_E6 0x02040006 +#define GPIO_SKL_LP_GPP_E7 0x02040007 +#define GPIO_SKL_LP_GPP_E8 0x02040008 +#define GPIO_SKL_LP_GPP_E9 0x02040009 +#define GPIO_SKL_LP_GPP_E10 0x0204000A +#define GPIO_SKL_LP_GPP_E11 0x0204000B +#define GPIO_SKL_LP_GPP_E12 0x0204000C +#define GPIO_SKL_LP_GPP_E13 0x0204000D +#define GPIO_SKL_LP_GPP_E14 0x0204000E +#define GPIO_SKL_LP_GPP_E15 0x0204000F +#define GPIO_SKL_LP_GPP_E16 0x02040010 +#define GPIO_SKL_LP_GPP_E17 0x02040011 +#define GPIO_SKL_LP_GPP_E18 0x02040012 +#define GPIO_SKL_LP_GPP_E19 0x02040013 +#define GPIO_SKL_LP_GPP_E20 0x02040014 +#define GPIO_SKL_LP_GPP_E21 0x02040015 +#define GPIO_SKL_LP_GPP_E22 0x02040016 +#define GPIO_SKL_LP_GPP_E23 0x02040017 +#define GPIO_SKL_LP_GPP_F0 0x02050000 +#define GPIO_SKL_LP_GPP_F1 0x02050001 +#define GPIO_SKL_LP_GPP_F2 0x02050002 +#define GPIO_SKL_LP_GPP_F3 0x02050003 +#define GPIO_SKL_LP_GPP_F4 0x02050004 +#define GPIO_SKL_LP_GPP_F5 0x02050005 +#define GPIO_SKL_LP_GPP_F6 0x02050006 +#define GPIO_SKL_LP_GPP_F7 0x02050007 +#define GPIO_SKL_LP_GPP_F8 0x02050008 +#define GPIO_SKL_LP_GPP_F9 0x02050009 +#define GPIO_SKL_LP_GPP_F10 0x0205000A +#define GPIO_SKL_LP_GPP_F11 0x0205000B +#define GPIO_SKL_LP_GPP_F12 0x0205000C +#define GPIO_SKL_LP_GPP_F13 0x0205000D +#define GPIO_SKL_LP_GPP_F14 0x0205000E +#define GPIO_SKL_LP_GPP_F15 0x0205000F +#define GPIO_SKL_LP_GPP_F16 0x02050010 +#define GPIO_SKL_LP_GPP_F17 0x02050011 +#define GPIO_SKL_LP_GPP_F18 0x02050012 +#define GPIO_SKL_LP_GPP_F19 0x02050013 +#define GPIO_SKL_LP_GPP_F20 0x02050014 +#define GPIO_SKL_LP_GPP_F21 0x02050015 +#define GPIO_SKL_LP_GPP_F22 0x02050016 +#define GPIO_SKL_LP_GPP_F23 0x02050017 +#define GPIO_SKL_LP_GPP_G0 0x02060000 +#define GPIO_SKL_LP_GPP_G1 0x02060001 +#define GPIO_SKL_LP_GPP_G2 0x02060002 +#define GPIO_SKL_LP_GPP_G3 0x02060003 +#define GPIO_SKL_LP_GPP_G4 0x02060004 +#define GPIO_SKL_LP_GPP_G5 0x02060005 +#define GPIO_SKL_LP_GPP_G6 0x02060006 +#define GPIO_SKL_LP_GPP_G7 0x02060007 +#define GPIO_SKL_LP_GPD0 0x02070000 +#define GPIO_SKL_LP_GPD1 0x02070001 +#define GPIO_SKL_LP_GPD2 0x02070002 +#define GPIO_SKL_LP_GPD3 0x02070003 +#define GPIO_SKL_LP_GPD4 0x02070004 +#define GPIO_SKL_LP_GPD5 0x02070005 +#define GPIO_SKL_LP_GPD6 0x02070006 +#define GPIO_SKL_LP_GPD7 0x02070007 +#define GPIO_SKL_LP_GPD8 0x02070008 +#define GPIO_SKL_LP_GPD9 0x02070009 +#define GPIO_SKL_LP_GPD10 0x0207000A +#define GPIO_SKL_LP_GPD11 0x0207000B + +#define END_OF_GPIO_TABLE 0xFFFFFFFF + +//Sample GPIO Table + +static GPIO_INIT_CONFIG mGpioTableLpDdr3Rvp3[] = +{ +//skip for eSPI function {GPIO_SKL_LP_GPP_A0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//H_RCIN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD0_ESPI_IO0 +//skip for eSPI function {GPIO_SKL_LP_GPP_A2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD1_ESPI_IO1 +//skip for eSPI function {GPIO_SKL_LP_GPP_A3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD2_ESPI_IO2 +//skip for eSPI function {GPIO_SKL_LP_GPP_A4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_AD3_ESPI_IO3 +//skip for eSPI function {GPIO_SKL_LP_GPP_A5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//LPC_FRAME_ESPI_CS_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//INT_SERIRQ +//skip for eSPI function {GPIO_SKL_LP_GPP_A7, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SLP_S0ix_R_N + {GPIO_SKL_LP_GPP_A8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_CLKRUN_N +//skip for eSPI function {GPIO_SKL_LP_GPP_A9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//LPC_CLK_ESPI_CLK + {GPIO_SKL_LP_GPP_A10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//PCH_CLK_PCI_TPM + {GPIO_SKL_LP_GPP_A11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//EC_HID_INTR + {GPIO_SKL_LP_GPP_A12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//M.2_WWAN_GNSS_UART_RST_N + {GPIO_SKL_LP_GPP_A13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SUS_PWR_ACK_R +//skip for eSPI function {GPIO_SKL_LP_GPP_A14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PM_SUS_STAT_ESPI_RST_N + {GPIO_SKL_LP_GPP_A15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SUSACK_R_N + {GPIO_SKL_LP_GPP_A16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_1P8_SEL + {GPIO_SKL_LP_GPP_A17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_PWR_EN_N + {GPIO_SKL_LP_GPP_A18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_0_SENSOR + {GPIO_SKL_LP_GPP_A19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_1_SENSOR + {GPIO_SKL_LP_GPP_A20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_GP_2_SENSOR + {GPIO_SKL_LP_GPP_A21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GNSS_CHUB_IRQ + {GPIO_SKL_LP_GPP_A22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_SLP_N + {GPIO_SKL_LP_GPP_A23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//FPS_DRDY + {GPIO_SKL_LP_GPP_B0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID0 + {GPIO_SKL_LP_GPP_B1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//V0.85A_VID1 + {GPIO_SKL_LP_GPP_B2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//GP_VRALERTB + {GPIO_SKL_LP_GPP_B3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioPlatformReset, GpioTermNone}},//TCH_PAD_INTR_R_N + {GPIO_SKL_LP_GPP_B4, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//BT_RF_KILL_N + {GPIO_SKL_LP_GPP_B5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_BT_UART_WAKE_N + // {GPIO_SKL_LP_GPP_B6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT1_N + // {GPIO_SKL_LP_GPP_B7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_SLOT2_LAN_N + // {GPIO_SKL_LP_GPP_B8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_SSD_SLOT3_N + // {GPIO_SKL_LP_GPP_B9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WIGIG_N + // {GPIO_SKL_LP_GPP_B10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CLK_REQ_M.2_WLAN_N + {GPIO_SKL_LP_GPP_B11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//MPHY_EXT_PWR_GATEB + {GPIO_SKL_LP_GPP_B12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SLP_S0_N + {GPIO_SKL_LP_GPP_B13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PLT_RST_N + {GPIO_SKL_LP_GPP_B14, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_PWREN + {GPIO_SKL_LP_GPP_B15, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_DFU + {GPIO_SKL_LP_GPP_B16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//M.2_WLAN_WIFI_WAKE_N + {GPIO_SKL_LP_GPP_B17, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSci, GpioHostDeepReset, GpioTermWpd20K}},//TBT_CIO_PLUG_EVENT_N + {GPIO_SKL_LP_GPP_B18, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermWpu20K}},//PCH_SLOT1_WAKE_N + {GPIO_SKL_LP_GPP_B19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//FPS_GSPI1_CS_R1_N + {GPIO_SKL_LP_GPP_B20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_CLK_R1 + {GPIO_SKL_LP_GPP_B21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MISO_R1 + {GPIO_SKL_LP_GPP_B22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//FPS_GSPI1_MOSI_R1 + {GPIO_SKL_LP_GPP_B23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DISCRETE_GNSS_RESET_N + {GPIO_SKL_LP_GPP_C0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SMB_CLK + {GPIO_SKL_LP_GPP_C1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SMB_DATA + {GPIO_SKL_LP_GPP_C2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SKIN_THRM_SNSR_ALERT_N + {GPIO_SKL_LP_GPP_C3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_CLK + {GPIO_SKL_LP_GPP_C4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML0_DATA + {GPIO_SKL_LP_GPP_C5, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermWpd20K}},//M.2_WIGIG_WAKE_N + {GPIO_SKL_LP_GPP_C6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SML1_CLK + {GPIO_SKL_LP_GPP_C7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//SML1_DATA + {GPIO_SKL_LP_GPP_C8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RXD + {GPIO_SKL_LP_GPP_C9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_TXD + {GPIO_SKL_LP_GPP_C10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_RTS_N + {GPIO_SKL_LP_GPP_C11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART0_CTS_N + {GPIO_SKL_LP_GPP_C12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RXD + {GPIO_SKL_LP_GPP_C13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_TXD + {GPIO_SKL_LP_GPP_C14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_RTS_N + {GPIO_SKL_LP_GPP_C15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART1_ISH_UART1_CTS_N + {GPIO_SKL_LP_GPP_C16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SDA + {GPIO_SKL_LP_GPP_C17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C0_SCL + {GPIO_SKL_LP_GPP_C18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SDA + {GPIO_SKL_LP_GPP_C19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_I2C1_SCL + {GPIO_SKL_LP_GPP_C20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RXD + {GPIO_SKL_LP_GPP_C21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_TXD + {GPIO_SKL_LP_GPP_C22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_RTS_N + {GPIO_SKL_LP_GPP_C23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SERIALIO_UART2_CTS_N + {GPIO_SKL_LP_GPP_D0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CS_N + {GPIO_SKL_LP_GPP_D1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_CLK + {GPIO_SKL_LP_GPP_D2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MISO + {GPIO_SKL_LP_GPP_D3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_MOSI + {GPIO_SKL_LP_GPP_D4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//CSI2_FLASH_STROBE + {GPIO_SKL_LP_GPP_D5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SDA + {GPIO_SKL_LP_GPP_D6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C0_SCL + {GPIO_SKL_LP_GPP_D7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SDA + {GPIO_SKL_LP_GPP_D8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_I2C1_SCL + {GPIO_SKL_LP_GPP_D9, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//HOME_BTN + {GPIO_SKL_LP_GPP_D10, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SCREEN_LOCK_PCH + {GPIO_SKL_LP_GPP_D11, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_UP_PCH + {GPIO_SKL_LP_GPP_D12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//VOL_DOWN_PCH + {GPIO_SKL_LP_GPP_D13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RXD_SML0B_DATA + {GPIO_SKL_LP_GPP_D14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_TXD_SML0B_CLK + {GPIO_SKL_LP_GPP_D15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_RTS_N + {GPIO_SKL_LP_GPP_D16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//ISH_UART0_CTS_SML0B_ALERT_N + {GPIO_SKL_LP_GPP_D17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_1 + {GPIO_SKL_LP_GPP_D18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_1 + {GPIO_SKL_LP_GPP_D19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_CLK_0 + {GPIO_SKL_LP_GPP_D20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DMIC_DATA_0 + {GPIO_SKL_LP_GPP_D21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO2 + {GPIO_SKL_LP_GPP_D22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SPI1_TCHPNL_IO3 + {GPIO_SKL_LP_GPP_D23, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP_MCLK + {GPIO_SKL_LP_GPP_E0, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//SPI_TPM_HDR_IRQ_N + {GPIO_SKL_LP_GPP_E1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA_ODD_PRSNT_N + {GPIO_SKL_LP_GPP_E2, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntLvlEdgDis | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//M.2_SSD_SATA2_PCIE3_DET_N + {GPIO_SKL_LP_GPP_E3, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioResumeReset, GpioTermNone}},//EINK_SSR_DFU_N + {GPIO_SKL_LP_GPP_E4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_RESET + {GPIO_SKL_LP_GPP_E5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA1_PHYSLP1_DIRECT_R + {GPIO_SKL_LP_GPP_E6, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutLow, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SATA2_PHYSLP2_M.2SSD_R + {GPIO_SKL_LP_GPP_E8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_SATA_LED_N + {GPIO_SKL_LP_GPP_E9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_0_WP1_OTG_N + {GPIO_SKL_LP_GPP_E10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_1_WP4_N + {GPIO_SKL_LP_GPP_E11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//USB_OC_2_WP2_WP3_WP5_R_N + {GPIO_SKL_LP_GPP_E12, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntDis, GpioHostDeepReset, GpioTermNone}},//PCH_NFC_IRQ + {GPIO_SKL_LP_GPP_E13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_HPD_Q + {GPIO_SKL_LP_GPP_E14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_HPD_Q + {GPIO_SKL_LP_GPP_E15, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntEdge | GpioIntSmi, GpioHostDeepReset, GpioTermNone}},//SMC_EXTSMI_R_N + {GPIO_SKL_LP_GPP_E16, {GpioPadModeGpio, GpioHostOwnAcpi, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioPlatformReset, GpioTermNone}},//SMC_RUNTIME_SCI_R_N + {GPIO_SKL_LP_GPP_E17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EDP_HPD + {GPIO_SKL_LP_GPP_E18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI1_CTRL_CLK + {GPIO_SKL_LP_GPP_E19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI1_CTRL_DATA + {GPIO_SKL_LP_GPP_E20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//DDI2_CTRL_CLK + {GPIO_SKL_LP_GPP_E21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//DDI2_CTRL_DATA + {GPIO_SKL_LP_GPP_E22, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirInInv, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_CODEC_IRQ + {GPIO_SKL_LP_GPP_E23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirOut, GpioOutHigh, GpioIntDis, GpioHostDeepReset, GpioTermWpd20K}},//TCH_PNL_RST_N + {GPIO_SKL_LP_GPP_F0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SCLK + {GPIO_SKL_LP_GPP_F1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_SFRM + {GPIO_SKL_LP_GPP_F2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_TXD + {GPIO_SKL_LP_GPP_F3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SSP2_RXD + {GPIO_SKL_LP_GPP_F4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SDA + {GPIO_SKL_LP_GPP_F5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C2_SCL + {GPIO_SKL_LP_GPP_F6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SDA + {GPIO_SKL_LP_GPP_F7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C3_SCL + {GPIO_SKL_LP_GPP_F8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SDA + {GPIO_SKL_LP_GPP_F9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C4_SCL + {GPIO_SKL_LP_GPP_F10, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SDA + {GPIO_SKL_LP_GPP_F11, {GpioPadModeNative2, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTolerance1v8 | GpioTermNone}},//SERIALIO_I2C5_ISH_12C2_SCL + {GPIO_SKL_LP_GPP_F12, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CMD + {GPIO_SKL_LP_GPP_F13, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA0 + {GPIO_SKL_LP_GPP_F14, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA1 + {GPIO_SKL_LP_GPP_F15, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA2 + {GPIO_SKL_LP_GPP_F16, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA3 + {GPIO_SKL_LP_GPP_F17, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA4 + {GPIO_SKL_LP_GPP_F18, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA5 + {GPIO_SKL_LP_GPP_F19, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA6 + {GPIO_SKL_LP_GPP_F20, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_DATA7 + {GPIO_SKL_LP_GPP_F21, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_RCLK + {GPIO_SKL_LP_GPP_F22, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//EMMC_CLK + {GPIO_SKL_LP_GPP_F23, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntApic, GpioHostDeepReset, GpioTermNone}},//PCH_M.2_WWAN_UIM_SIM_DET + {GPIO_SKL_LP_GPP_G0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CMD + {GPIO_SKL_LP_GPP_G1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA0 + {GPIO_SKL_LP_GPP_G2, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA1 + {GPIO_SKL_LP_GPP_G3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA2 + {GPIO_SKL_LP_GPP_G4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_DATA3 + {GPIO_SKL_LP_GPP_G5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CDB + {GPIO_SKL_LP_GPP_G6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_CLK + {GPIO_SKL_LP_GPP_G7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioHostDeepReset, GpioTermNone}},//SD_WP + {GPIO_SKL_LP_GPD0, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_BATLOW_R_N + {GPIO_SKL_LP_GPD1, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//AC_PRESENT_R + {GPIO_SKL_LP_GPD2, {GpioPadModeNative1, GpioHostOwnAcpi, GpioDirIn, GpioOutDefault, GpioIntLevel | GpioIntSci, GpioDswReset, GpioTermNone}},//LANWAKE_SMC_WAKE_SCI_N + {GPIO_SKL_LP_GPD3, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermWpu20K}},//PM_PWRBTN_R_N + {GPIO_SKL_LP_GPD4, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S3_R_N + {GPIO_SKL_LP_GPD5, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S4_R_N + {GPIO_SKL_LP_GPD6, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_M_R_N + {GPIO_SKL_LP_GPD7, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//USB_WAKEOUT_INTRUDET_N + {GPIO_SKL_LP_GPD8, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SUS_CLK + {GPIO_SKL_LP_GPD9, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PCH_SLP_WLAN_N + {GPIO_SKL_LP_GPD10, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//SLP_S5_R_N + {GPIO_SKL_LP_GPD11, {GpioPadModeNative1, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//PM_LANPHY_ENABLE + {END_OF_GPIO_TABLE, {GpioPadModeGpio, GpioHostOwnGpio, GpioDirNone, GpioOutDefault, GpioIntDis, GpioDswReset, GpioTermNone}},//Marking End of Table +}; + +#endif //_GPIO_CONFIG_H_ diff --git a/models/lemp10/FSP/Include/MemInfoHob.h b/models/lemp10/FSP/Include/MemInfoHob.h new file mode 100644 index 0000000..4ff8bf9 --- /dev/null +++ b/models/lemp10/FSP/Include/MemInfoHob.h @@ -0,0 +1,286 @@ +/** @file + This file contains definitions required for creation of + Memory S3 Save data, Memory Info data and Memory Platform + data hobs. + + @copyright + Copyright (c) 1999 - 2020, Intel Corporation. All rights reserved.
+ This program and the accompanying materials are licensed and made available under + the terms and conditions of the BSD License that accompanies this distribution. + The full text of the license may be found at + http://opensource.org/licenses/bsd-license.php. + THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, + + WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. + +@par Specification Reference: +**/ +#ifndef _MEM_INFO_HOB_H_ +#define _MEM_INFO_HOB_H_ + +#pragma pack (push, 1) + +extern EFI_GUID gSiMemoryS3DataGuid; +extern EFI_GUID gSiMemoryInfoDataGuid; +extern EFI_GUID gSiMemoryPlatformDataGuid; + +#define MAX_TRACE_CACHE_TYPE 3 + +#define MAX_NODE 2 +#define MAX_CH 4 +#define MAX_DIMM 2 + +/// +/// Host reset states from MRC. +/// +#define WARM_BOOT 2 + +#define R_MC_CHNL_RANK_PRESENT 0x7C +#define B_RANK0_PRS BIT0 +#define B_RANK1_PRS BIT1 +#define B_RANK2_PRS BIT4 +#define B_RANK3_PRS BIT5 + +// @todo remove and use the MdePkg\Include\Pi\PiHob.h +#if !defined(_PEI_HOB_H_) && !defined(__PI_HOB_H__) +#ifndef __HOB__H__ +typedef struct _EFI_HOB_GENERIC_HEADER { + UINT16 HobType; + UINT16 HobLength; + UINT32 Reserved; +} EFI_HOB_GENERIC_HEADER; + +typedef struct _EFI_HOB_GUID_TYPE { + EFI_HOB_GENERIC_HEADER Header; + EFI_GUID Name; + /// + /// Guid specific data goes here + /// +} EFI_HOB_GUID_TYPE; +#endif +#endif + +/// +/// Defines taken from MRC so avoid having to include MrcInterface.h +/// + +// +// Matches MAX_SPD_SAVE define in MRC +// +#ifndef MAX_SPD_SAVE +#define MAX_SPD_SAVE 29 +#endif + +// +// MRC version description. +// +typedef struct { + UINT8 Major; ///< Major version number + UINT8 Minor; ///< Minor version number + UINT8 Rev; ///< Revision number + UINT8 Build; ///< Build number +} SiMrcVersion; + +// +// Matches MrcChannelSts enum in MRC +// +#ifndef CHANNEL_NOT_PRESENT +#define CHANNEL_NOT_PRESENT 0 // There is no channel present on the controller. +#endif +#ifndef CHANNEL_DISABLED +#define CHANNEL_DISABLED 1 // There is a channel present but it is disabled. +#endif +#ifndef CHANNEL_PRESENT +#define CHANNEL_PRESENT 2 // There is a channel present and it is enabled. +#endif + +// +// Matches MrcDimmSts enum in MRC +// +#ifndef DIMM_ENABLED +#define DIMM_ENABLED 0 // DIMM/rank Pair is enabled, presence will be detected. +#endif +#ifndef DIMM_DISABLED +#define DIMM_DISABLED 1 // DIMM/rank Pair is disabled, regardless of presence. +#endif +#ifndef DIMM_PRESENT +#define DIMM_PRESENT 2 // There is a DIMM present in the slot/rank pair and it will be used. +#endif +#ifndef DIMM_NOT_PRESENT +#define DIMM_NOT_PRESENT 3 // There is no DIMM present in the slot/rank pair. +#endif + +// +// Matches MrcBootMode enum in MRC +// +#ifndef __MRC_BOOT_MODE__ +#define __MRC_BOOT_MODE__ //The below values are originated from MrcCommonTypes.h + #ifndef INT32_MAX + #define INT32_MAX (0x7FFFFFFF) + #endif //INT32_MAX +typedef enum { + bmCold, ///< Cold boot + bmWarm, ///< Warm boot + bmS3, ///< S3 resume + bmFast, ///< Fast boot + MrcBootModeMax, ///< MRC_BOOT_MODE enumeration maximum value. + MrcBootModeDelim = INT32_MAX ///< This value ensures the enum size is consistent on both sides of the PPI. +} MRC_BOOT_MODE; +#endif //__MRC_BOOT_MODE__ + +// +// Matches MrcDdrType enum in MRC +// +#ifndef MRC_DDR_TYPE_DDR4 +#define MRC_DDR_TYPE_DDR4 0 +#endif +#ifndef MRC_DDR_TYPE_DDR3 +#define MRC_DDR_TYPE_DDR3 1 +#endif +#ifndef MRC_DDR_TYPE_LPDDR3 +#define MRC_DDR_TYPE_LPDDR3 2 +#endif +#ifndef MRC_DDR_TYPE_LPDDR4 +#define MRC_DDR_TYPE_LPDDR4 3 +#endif +#ifndef MRC_DDR_TYPE_WIO2 +#define MRC_DDR_TYPE_WIO2 4 +#endif +#ifndef MRC_DDR_TYPE_UNKNOWN +#define MRC_DDR_TYPE_UNKNOWN 5 +#endif + +#define MAX_PROFILE_NUM 4 // number of memory profiles supported +#define MAX_XMP_PROFILE_NUM 2 // number of XMP profiles supported + +// +// DIMM timings +// +typedef struct { + UINT32 tCK; ///< Memory cycle time, in femtoseconds. + UINT16 NMode; ///< Number of tCK cycles for the channel DIMM's command rate mode. + UINT16 tCL; ///< Number of tCK cycles for the channel DIMM's CAS latency. + UINT16 tCWL; ///< Number of tCK cycles for the channel DIMM's minimum CAS write latency time. + UINT16 tFAW; ///< Number of tCK cycles for the channel DIMM's minimum four activate window delay time. + UINT16 tRAS; ///< Number of tCK cycles for the channel DIMM's minimum active to precharge delay time. + UINT16 tRCDtRP; ///< Number of tCK cycles for the channel DIMM's minimum RAS# to CAS# delay time and Row Precharge delay time. + UINT16 tREFI; ///< Number of tCK cycles for the channel DIMM's minimum Average Periodic Refresh Interval. + UINT16 tRFC; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFCpb; ///< Number of tCK cycles for the channel DIMM's minimum per bank refresh recovery delay time. + UINT16 tRFC2; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRFC4; ///< Number of tCK cycles for the channel DIMM's minimum refresh recovery delay time. + UINT16 tRPab; ///< Number of tCK cycles for the channel DIMM's minimum row precharge delay time for all banks. + UINT16 tRRD; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time. + UINT16 tRRD_L; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for same bank groups. + UINT16 tRRD_S; ///< Number of tCK cycles for the channel DIMM's minimum row active to row active delay time for different bank groups. + UINT16 tRTP; ///< Number of tCK cycles for the channel DIMM's minimum internal read to precharge command delay time. + UINT16 tWR; ///< Number of tCK cycles for the channel DIMM's minimum write recovery time. + UINT16 tWTR; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time. + UINT16 tWTR_L; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for same bank groups. + UINT16 tWTR_S; ///< Number of tCK cycles for the channel DIMM's minimum internal write to read command delay time for different bank groups. + UINT16 tCCD_L; ///< Number of tCK cycles for the channel DIMM's minimum CAS-to-CAS delay for same bank group. +} MRC_CH_TIMING; + +/// +/// Memory SMBIOS & OC Memory Data Hob +/// +typedef struct { + UINT8 Status; ///< See MrcDimmStatus for the definition of this field. + UINT8 DimmId; + UINT32 DimmCapacity; ///< DIMM size in MBytes. + UINT16 MfgId; + UINT8 ModulePartNum[20]; ///< Module part number for DDR3 is 18 bytes however for DRR4 20 bytes as per JEDEC Spec, so reserving 20 bytes + UINT8 RankInDimm; ///< The number of ranks in this DIMM. + UINT8 SpdDramDeviceType; ///< Save SPD DramDeviceType information needed for SMBIOS structure creation. + UINT8 SpdModuleType; ///< Save SPD ModuleType information needed for SMBIOS structure creation. + UINT8 SpdModuleMemoryBusWidth; ///< Save SPD ModuleMemoryBusWidth information needed for SMBIOS structure creation. + UINT8 SpdSave[MAX_SPD_SAVE]; ///< Save SPD Manufacturing information needed for SMBIOS structure creation. + UINT16 Speed; ///< The maximum capable speed of the device, in MHz + UINT8 MdSocket; ///< MdSocket: 0 = Memory Down, 1 = Socketed. Needed for SMBIOS structure creation. +} DIMM_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this channel should be used. + UINT8 ChannelId; + UINT8 DimmCount; ///< Number of valid DIMMs that exist in the channel. + MRC_CH_TIMING Timing[MAX_PROFILE_NUM]; ///< The channel timing values. + DIMM_INFO DimmInfo[MAX_DIMM]; ///< Save the DIMM output characteristics. +} CHANNEL_INFO; + +typedef struct { + UINT8 Status; ///< Indicates whether this controller should be used. + UINT16 DeviceId; ///< The PCI device id of this memory controller. + UINT8 RevisionId; ///< The PCI revision id of this memory controller. + UINT8 ChannelCount; ///< Number of valid channels that exist on the controller. + CHANNEL_INFO ChannelInfo[MAX_CH]; ///< The following are channel level definitions. +} CONTROLLER_INFO; + +typedef struct { + UINT64 BaseAddress; ///< Trace Base Address + UINT64 TotalSize; ///< Total Trace Region of Same Cache type + UINT8 CacheType; ///< Trace Cache Type + UINT8 ErrorCode; ///< Trace Region Allocation Fail Error code + UINT8 Rsvd[2]; +} PSMI_MEM_INFO; + +typedef struct { + UINT8 Revision; + UINT16 DataWidth; ///< Data width, in bits, of this memory device + /** As defined in SMBIOS 3.0 spec + Section 7.18.2 and Table 75 + **/ + UINT8 MemoryType; ///< DDR type: DDR3, DDR4, or LPDDR3 + UINT16 MaximumMemoryClockSpeed;///< The maximum capable speed of the device, in megahertz (MHz) + UINT16 ConfiguredMemoryClockSpeed; ///< The configured clock speed to the memory device, in megahertz (MHz) + /** As defined in SMBIOS 3.0 spec + Section 7.17.3 and Table 72 + **/ + UINT8 ErrorCorrectionType; + + SiMrcVersion Version; + BOOLEAN EccSupport; + UINT8 MemoryProfile; + UINT32 TotalPhysicalMemorySize; + UINT32 DefaultXmptCK[MAX_XMP_PROFILE_NUM];///< Stores the tCK value read from SPD XMP profiles if they exist. + UINT8 XmpProfileEnable; ///< If XMP capable DIMMs are detected, this will indicate which XMP Profiles are common among all DIMMs. + UINT8 Ratio; + UINT8 RefClk; + UINT32 VddVoltage[MAX_PROFILE_NUM]; + CONTROLLER_INFO Controller[MAX_NODE]; +} MEMORY_INFO_DATA_HOB; + +/** + Memory Platform Data Hob + + Revision 1: + - Initial version. + Revision 2: + - Added TsegBase, PrmrrSize, PrmrrBase, Gttbase, MmioSize, PciEBaseAddress fields +**/ +typedef struct { + UINT8 Revision; + UINT8 Reserved[3]; + UINT32 BootMode; + UINT32 TsegSize; + UINT32 TsegBase; + UINT32 PrmrrSize; + UINT64 PrmrrBase; + UINT32 PramSize; + UINT64 PramBase; + UINT64 DismLimit; + UINT64 DismBase; + UINT32 GttBase; + UINT32 MmioSize; + UINT32 PciEBaseAddress; + PSMI_MEM_INFO PsmiInfo[MAX_TRACE_CACHE_TYPE]; +} MEMORY_PLATFORM_DATA; + +typedef struct { + EFI_HOB_GUID_TYPE EfiHobGuidType; + MEMORY_PLATFORM_DATA Data; + UINT8 *Buffer; +} MEMORY_PLATFORM_DATA_HOB; + +#pragma pack (pop) + +#endif // _MEM_INFO_HOB_H_ diff --git a/models/lemp10/FSP/LICENSE b/models/lemp10/FSP/LICENSE new file mode 100644 index 0000000..9fddc58 --- /dev/null +++ b/models/lemp10/FSP/LICENSE @@ -0,0 +1,46 @@ +************************************************************************ +** ** +** ** +** IMPORTANT - READ THIS BEFORE COPYING, INSTALLING OR USING ** +** ** +** ANY PORTION OF THE SOFTWARE ** +** ** +************************************************************************ + +Copyright (c) 2018 Intel Corporation. +All rights reserved. + +Redistribution. + +Redistribution and use in binary form, without modification, are permitted +provided that the following conditions are met: + +- Redistributions must reproduce the above copyright notice and the +following disclaimer in the documentation and/or other materials provided +with the distribution. + +- Neither the name of Intel Corporation nor the names of its suppliers +may be used to endorse or promote products derived from this software +without specific prior written permission. + +- No reverse engineering, decompilation, or disassembly of this software +is permitted. + +"Binary form" includes any format that is commonly used for electronic +conveyance that is a reversible, bit-exact translation of binary +representation to ASCII or ISO text, for example "uuencode". + +DISCLAIMER. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE. + diff --git a/models/lemp10/IntelGopDriver.efi b/models/lemp10/IntelGopDriver.efi new file mode 100644 index 0000000..1d87dee --- /dev/null +++ b/models/lemp10/IntelGopDriver.efi @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:1a8f7e52b39dd1f5dc9e36dcce6af0016ca419e957760e5fece5e4f90d167bdc +size 148416 diff --git a/models/lemp10/IntelGopDriver.inf b/models/lemp10/IntelGopDriver.inf new file mode 100644 index 0000000..39b2eb9 --- /dev/null +++ b/models/lemp10/IntelGopDriver.inf @@ -0,0 +1,9 @@ +[Defines] + INF_VERSION = 0x00010005 + BASE_NAME = IntelGopDriver + FILE_GUID = 767222f4-a9f4-41ba-9faa-edaa1405a486 + MODULE_TYPE = UEFI_DRIVER + VERSION_STRING = 1.0 + +[Binaries.X64] + PE32|IntelGopDriver.efi|* diff --git a/models/lemp10/README.md b/models/lemp10/README.md new file mode 100644 index 0000000..d109577 --- /dev/null +++ b/models/lemp10/README.md @@ -0,0 +1,12 @@ +# System76 Lemur Pro (lemp10) + +## Contents + +- [EC](./ec.rom) + - *Read Error: No such file or directory (os error 2)* +- [FD](./fd.rom) + - Size: 4 KB + - HAP: false +- [ME](./me.rom) + - Size: 5116 KB + - Version: 15.0.10.1447 diff --git a/models/lemp10/README.md.in b/models/lemp10/README.md.in new file mode 100644 index 0000000..525bd7d --- /dev/null +++ b/models/lemp10/README.md.in @@ -0,0 +1 @@ +# System76 Lemur Pro (lemp10) diff --git a/models/lemp10/chip.txt b/models/lemp10/chip.txt new file mode 100644 index 0000000..9b1d0de --- /dev/null +++ b/models/lemp10/chip.txt @@ -0,0 +1 @@ +GD25Q127C/GD25Q128C diff --git a/models/lemp10/coreboot-collector.txt b/models/lemp10/coreboot-collector.txt new file mode 100644 index 0000000..74e8e1d --- /dev/null +++ b/models/lemp10/coreboot-collector.txt @@ -0,0 +1,255 @@ +## PCI ## +PCI Device: 0000:00:00.0: Class 0x00060000, Vendor 0x8086, Device 0x9A14, Revision 0x01 +PCI Device: 0000:00:02.0: Class 0x00030000, Vendor 0x8086, Device 0x9A49, Revision 0x01 +PCI Device: 0000:00:04.0: Class 0x00118000, Vendor 0x8086, Device 0x9A03, Revision 0x01 +PCI Device: 0000:00:06.0: Class 0x00060400, Vendor 0x8086, Device 0x9A09, Revision 0x01 +PCI Device: 0000:00:07.0: Class 0x00060400, Vendor 0x8086, Device 0x9A23, Revision 0x01 +PCI Device: 0000:00:0a.0: Class 0x00118000, Vendor 0x8086, Device 0x9A0D, Revision 0x01 +PCI Device: 0000:00:0d.0: Class 0x000C0330, Vendor 0x8086, Device 0x9A13, Revision 0x01 +PCI Device: 0000:00:0d.2: Class 0x000C0340, Vendor 0x8086, Device 0x9A1B, Revision 0x01 +PCI Device: 0000:00:14.0: Class 0x000C0330, Vendor 0x8086, Device 0xA0ED, Revision 0x20 +PCI Device: 0000:00:14.2: Class 0x00050000, Vendor 0x8086, Device 0xA0EF, Revision 0x20 +PCI Device: 0000:00:14.3: Class 0x00028000, Vendor 0x8086, Device 0xA0F0, Revision 0x20 +PCI Device: 0000:00:15.0: Class 0x000C8000, Vendor 0x8086, Device 0xA0E8, Revision 0x20 +PCI Device: 0000:00:15.1: Class 0x000C8000, Vendor 0x8086, Device 0xA0E9, Revision 0x20 +PCI Device: 0000:00:15.2: Class 0x000C8000, Vendor 0x8086, Device 0xA0EA, Revision 0x20 +PCI Device: 0000:00:16.0: Class 0x00078000, Vendor 0x8086, Device 0xA0E0, Revision 0x20 +PCI Device: 0000:00:17.0: Class 0x00010601, Vendor 0x8086, Device 0xA0D3, Revision 0x20 +PCI Device: 0000:00:1c.0: Class 0x00060400, Vendor 0x8086, Device 0xA0BD, Revision 0x20 +PCI Device: 0000:00:1f.0: Class 0x00060100, Vendor 0x8086, Device 0xA082, Revision 0x20 +PCI Device: 0000:00:1f.3: Class 0x00040300, Vendor 0x8086, Device 0xA0C8, Revision 0x20 +PCI Device: 0000:00:1f.4: Class 0x000C0500, Vendor 0x8086, Device 0xA0A3, Revision 0x20 +PCI Device: 0000:00:1f.5: Class 0x000C8000, Vendor 0x8086, Device 0xA0A4, Revision 0x20 +PCI Device: 0000:01:00.0: Class 0x00010802, Vendor 0x144D, Device 0xA808, Revision 0x00 +PCI Device: 0000:2c:00.0: Class 0x00FF0000, Vendor 0x10EC, Device 0x522A, Revision 0x01 +## GPIO ## +500 Series PCH-LP +GPP_B0 (0x6E,0x00) 0x44000700 0x0003c018 0x00000100 0x00000000 +GPP_B1 (0x6E,0x02) 0x44000700 0x0003c019 0x00000100 0x00000000 +GPP_B2 (0x6E,0x04) 0x44000102 0x0000301a 0x00000000 0x00000000 +GPP_B3 (0x6E,0x06) 0x80800102 0x0000001b 0x00000000 0x00000000 +GPP_B4 (0x6E,0x08) 0x44000300 0x0000001c 0x00000000 0x00000000 +GPP_B5 (0x6E,0x0A) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_B6 (0x6E,0x0C) 0x44000300 0x0000001e 0x00000000 0x00000000 +GPP_B7 (0x6E,0x0E) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_B8 (0x6E,0x10) 0x44000300 0x00000020 0x00000000 0x00000000 +GPP_B9 (0x6E,0x12) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_B10 (0x6E,0x14) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_B11 (0x6E,0x16) 0x04000702 0x00000023 0x00000000 0x00000000 +GPP_B12 (0x6E,0x18) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_B13 (0x6E,0x1A) 0x44000700 0x0003c025 0x00000000 0x00000000 +GPP_B14 (0x6E,0x1C) 0x44000200 0x0003c026 0x00000000 0x00000000 +GPP_B15 (0x6E,0x1E) 0x44000300 0x00000027 0x00000000 0x00000000 +GPP_B16 (0x6E,0x20) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_B17 (0x6E,0x22) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_B18 (0x6E,0x24) 0x44000300 0x0000002a 0x00000100 0x00000000 +GPP_B19 (0x6E,0x26) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_B20 (0x6E,0x28) 0x44000300 0x0000002c 0x00000000 0x00000000 +GPP_B21 (0x6E,0x2A) 0x44000300 0x0000002d 0x00000000 0x00000000 +GPP_B22 (0x6E,0x2C) 0x44000300 0x0000002e 0x00000000 0x00000000 +GPP_B23 (0x6E,0x2E) 0x44000200 0x0000002f 0x00000000 0x00000000 +GPP_T2 (0x6E,0x38) 0x44000300 0x00000032 0x00000000 0x00000000 +GPP_T3 (0x6E,0x3A) 0x44000300 0x00000033 0x00000000 0x00000000 +GPP_A0 (0x6E,0x54) 0x44000700 0x0003f040 0x00000100 0x00000000 +GPP_A1 (0x6E,0x56) 0x44000702 0x0003f041 0x00000100 0x00000000 +GPP_A2 (0x6E,0x58) 0x44000700 0x0003f042 0x00000100 0x00000000 +GPP_A3 (0x6E,0x5A) 0x44000700 0x0003f043 0x00000100 0x00000000 +GPP_A4 (0x6E,0x5C) 0x44000700 0x0003f044 0x00000100 0x00000000 +GPP_A5 (0x6E,0x5E) 0x44000700 0x0003d045 0x00000100 0x00000000 +GPP_A6 (0x6E,0x60) 0x44000700 0x0003c046 0x00000100 0x00000000 +GPP_A7 (0x6E,0x62) 0x44000300 0x00000047 0x00000000 0x00000000 +GPP_A8 (0x6E,0x64) 0x44000b00 0x0003c048 0x00000100 0x00000000 +GPP_A9 (0x6E,0x66) 0x44000f00 0x0003c049 0x00000100 0x00000000 +GPP_A10 (0x6E,0x68) 0x44000300 0x0000004a 0x00000000 0x00000000 +GPP_A11 (0x6E,0x6A) 0x44000300 0x0000004b 0x00000000 0x00000000 +GPP_A12 (0x6E,0x6C) 0x44000400 0x0000004c 0x00000000 0x00000000 +GPP_A13 (0x6E,0x6E) 0x84000201 0x0000004d 0x00000000 0x00000000 +GPP_A14 (0x6E,0x70) 0x44000300 0x0000004e 0x00000000 0x00000000 +GPP_A15 (0x6E,0x72) 0x44000300 0x0000004f 0x00000000 0x00000000 +GPP_A16 (0x6E,0x74) 0x44000300 0x00000050 0x00000000 0x00000000 +GPP_A17 (0x6E,0x76) 0x44000300 0x00024051 0x00000000 0x00000000 +GPP_A18 (0x6E,0x78) 0x44000700 0x00024052 0x00000000 0x00000000 +GPP_A19 (0x6E,0x7A) 0x44000300 0x00000053 0x00000000 0x00000000 +GPP_A20 (0x6E,0x7C) 0x44000300 0x00000054 0x00000000 0x00000000 +GPP_A21 (0x6E,0x7E) 0x44000300 0x0003c055 0x00000000 0x00000000 +GPP_A22 (0x6E,0x80) 0x44000300 0x0003c056 0x00000000 0x00000000 +GPP_A23 (0x6E,0x82) 0x84000200 0x00000057 0x00000000 0x00000000 +GPP_S0 (0x6D,0x00) 0x44000300 0x0180006c 0x00000000 0x00000000 +GPP_S1 (0x6D,0x02) 0x44000300 0x0180006d 0x00000000 0x00000000 +GPP_S2 (0x6D,0x04) 0x44000300 0x0180006e 0x00000000 0x00000000 +GPP_S3 (0x6D,0x06) 0x44000300 0x0180006f 0x00000000 0x00000000 +GPP_S4 (0x6D,0x08) 0x44000300 0x01800070 0x00000000 0x00000000 +GPP_S5 (0x6D,0x0A) 0x44000300 0x01800071 0x00000000 0x00000000 +GPP_S6 (0x6D,0x0C) 0x44000100 0x01800072 0x00000000 0x00000000 +GPP_S7 (0x6D,0x0E) 0x44000100 0x01800073 0x00000000 0x00000000 +GPP_H0 (0x6D,0x10) 0x44000300 0x00001074 0x00000000 0x00000000 +GPP_H1 (0x6D,0x12) 0x44000300 0x00001075 0x00000000 0x00000000 +GPP_H2 (0x6D,0x14) 0x44000300 0x00001076 0x00000000 0x00000000 +GPP_H3 (0x6D,0x16) 0x44000100 0x00001077 0x00000000 0x00000000 +GPP_H4 (0x6D,0x18) 0x44000702 0x00000018 0x00000000 0x00000000 +GPP_H5 (0x6D,0x1A) 0x44000702 0x00000019 0x00000000 0x00000000 +GPP_H6 (0x6D,0x1C) 0x44000102 0x0000001a 0x00000000 0x00000000 +GPP_H7 (0x6D,0x1E) 0x44000300 0x0000001b 0x00000000 0x00000000 +GPP_H8 (0x6D,0x20) 0x44000100 0x0000101c 0x00000100 0x00000000 +GPP_H9 (0x6D,0x22) 0x44000100 0x0000101d 0x00000100 0x00000000 +GPP_H10 (0x6D,0x24) 0x44000300 0x0000001e 0x00000000 0x00000000 +GPP_H11 (0x6D,0x26) 0x44000300 0x0000001f 0x00000000 0x00000000 +GPP_H12 (0x6D,0x28) 0x44000300 0x00000020 0x00000000 0x00000000 +GPP_H13 (0x6D,0x2A) 0x44000300 0x00000021 0x00000000 0x00000000 +GPP_H14 (0x6D,0x2C) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_H15 (0x6D,0x2E) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_H16 (0x6D,0x30) 0x44000700 0x0003c024 0x00000000 0x00000000 +GPP_H17 (0x6D,0x32) 0x44000602 0x0003c025 0x00000000 0x00000000 +GPP_H18 (0x6D,0x34) 0x44000700 0x0003c026 0x00000000 0x00000000 +GPP_H19 (0x6D,0x36) 0x44000300 0x0003c027 0x00000000 0x00000000 +GPP_H20 (0x6D,0x38) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_H21 (0x6D,0x3A) 0x44000300 0x00000029 0x00000000 0x00000000 +GPP_H22 (0x6D,0x3C) 0x44000300 0x0000002a 0x00000000 0x00000000 +GPP_H23 (0x6D,0x3E) 0x44000300 0x0000002b 0x00000000 0x00000000 +GPP_D0 (0x6D,0x40) 0x44000201 0x0000002c 0x00000000 0x00000000 +GPP_D1 (0x6D,0x42) 0x44000100 0x0000002d 0x00000000 0x00000000 +GPP_D2 (0x6D,0x44) 0x44000100 0x0000102e 0x00000000 0x00000000 +GPP_D3 (0x6D,0x46) 0x44000100 0x0000102f 0x00000000 0x00000000 +GPP_D4 (0x6D,0x48) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_D5 (0x6D,0x4A) 0x44000702 0x00000031 0x00000000 0x00000000 +GPP_D6 (0x6D,0x4C) 0x44000702 0x00000032 0x00000000 0x00000000 +GPP_D7 (0x6D,0x4E) 0x44000700 0x00000033 0x00000000 0x00000000 +GPP_D8 (0x6D,0x50) 0x44000702 0x00000034 0x00000000 0x00000000 +GPP_D9 (0x6D,0x52) 0x84000301 0x00000035 0x00000000 0x00000000 +GPP_D10 (0x6D,0x54) 0x44000300 0x00000036 0x00000000 0x00000000 +GPP_D11 (0x6D,0x56) 0x44000100 0x00001037 0x00000000 0x00000000 +GPP_D12 (0x6D,0x58) 0x44000300 0x00000038 0x00000000 0x00000000 +GPP_D13 (0x6D,0x5A) 0x44000300 0x00000039 0x00000000 0x00000000 +GPP_D14 (0x6D,0x5C) 0x84000201 0x0000003a 0x00000000 0x00000000 +GPP_D15 (0x6D,0x5E) 0x44000300 0x0000003b 0x00000000 0x00000000 +GPP_D16 (0x6D,0x60) 0x44000300 0x0000003c 0x00000000 0x00000000 +GPP_D17 (0x6D,0x62) 0x44000100 0x0000003d 0x00000000 0x00000000 +GPP_D18 (0x6D,0x64) 0x44000102 0x0000003e 0x00000000 0x00000000 +GPP_D19 (0x6D,0x66) 0x44000300 0x0000003f 0x00000000 0x00000000 +GPP_U4 (0x6D,0x72) 0x44000300 0x00000044 0x00000000 0x00000000 +GPP_U5 (0x6D,0x74) 0x44000300 0x00000045 0x00000000 0x00000000 +GPD0 (0x6C,0x00) 0x04000702 0x00003060 0x00000000 0x00000000 +GPD1 (0x6C,0x02) 0x04000702 0x00003c61 0x00000000 0x00000000 +GPD2 (0x6C,0x04) 0x04000102 0x00000062 0x00000000 0x00000000 +GPD3 (0x6C,0x06) 0x04000702 0x00003063 0x00000010 0x00000000 +GPD4 (0x6C,0x08) 0x04000600 0x00000064 0x00000000 0x00000000 +GPD5 (0x6C,0x0A) 0x04000600 0x00000065 0x00000000 0x00000000 +GPD6 (0x6C,0x0C) 0x44000700 0x00000066 0x00000000 0x00000000 +GPD7 (0x6C,0x0E) 0x04000201 0x00000067 0x00000000 0x00000000 +GPD8 (0x6C,0x10) 0x04000700 0x00000068 0x00000000 0x00000000 +GPD9 (0x6C,0x12) 0x04000200 0x00000069 0x00000000 0x00000000 +GPD10 (0x6C,0x14) 0x44000500 0x0000306a 0x00000000 0x00000000 +GPD11 (0x6C,0x16) 0x44000102 0x0000306b 0x00000000 0x00000000 +GPP_C0 (0x6A,0x00) 0x44000702 0x0003c06e 0x00000000 0x00000000 +GPP_C1 (0x6A,0x02) 0x44000702 0x0003c06f 0x00000000 0x00000000 +GPP_C2 (0x6A,0x04) 0x44000201 0x00000070 0x00000100 0x00000000 +GPP_C3 (0x6A,0x06) 0x44000702 0x00000071 0x00000000 0x00000000 +GPP_C4 (0x6A,0x08) 0x44000702 0x00000072 0x00000000 0x00000000 +GPP_C5 (0x6A,0x0A) 0x44000300 0x00000073 0x00000000 0x00000000 +GPP_C6 (0x6A,0x0C) 0x04000702 0x00000074 0x00000000 0x00000000 +GPP_C7 (0x6A,0x0E) 0x04000702 0x00000075 0x00000000 0x00000000 +GPP_C8 (0x6A,0x10) 0x44000300 0x00000076 0x00000000 0x00000000 +GPP_C9 (0x6A,0x12) 0x40100102 0x00003077 0x00000000 0x00000000 +GPP_C10 (0x6A,0x14) 0x44000300 0x00000018 0x00000000 0x00000000 +GPP_C11 (0x6A,0x16) 0x44000300 0x00000019 0x00000000 0x00000000 +GPP_C12 (0x6A,0x18) 0x44000300 0x0000001a 0x00000000 0x00000000 +GPP_C13 (0x6A,0x1A) 0x84000201 0x0000001b 0x00000000 0x00000000 +GPP_C14 (0x6A,0x1C) 0x44000300 0x0000101c 0x00000000 0x00000000 +GPP_C15 (0x6A,0x1E) 0x44000300 0x0000001d 0x00000000 0x00000000 +GPP_C16 (0x6A,0x20) 0x44000702 0x0000001e 0x00000000 0x00000000 +GPP_C17 (0x6A,0x22) 0x44000702 0x0000001f 0x00000000 0x00000000 +GPP_C18 (0x6A,0x24) 0x44000702 0x00000020 0x00000000 0x00000000 +GPP_C19 (0x6A,0x26) 0x44000702 0x00000021 0x00000000 0x00000000 +GPP_C20 (0x6A,0x28) 0x44000300 0x00000022 0x00000000 0x00000000 +GPP_C21 (0x6A,0x2A) 0x44000300 0x00000023 0x00000000 0x00000000 +GPP_C22 (0x6A,0x2C) 0x84000201 0x00000024 0x00000000 0x00000000 +GPP_C23 (0x6A,0x2E) 0x40880102 0x00000025 0x00000000 0x00000000 +GPP_F0 (0x6A,0x30) 0x44000700 0x0003c056 0x00000100 0x00000000 +GPP_F1 (0x6A,0x32) 0x44000702 0x0003f057 0x00000100 0x00000000 +GPP_F2 (0x6A,0x34) 0x44000700 0x0003c058 0x00000100 0x00000000 +GPP_F3 (0x6A,0x36) 0x44000700 0x0003f059 0x00000100 0x00000000 +GPP_F4 (0x6A,0x38) 0x44000300 0x0000005a 0x00000100 0x00000000 +GPP_F5 (0x6A,0x3A) 0x44000300 0x0000005b 0x00000100 0x00000000 +GPP_F6 (0x6A,0x3C) 0x44000300 0x0000005c 0x00000100 0x00000000 +GPP_F7 (0x6A,0x3E) 0x44000300 0x0000005d 0x00000000 0x00000000 +GPP_F8 (0x6A,0x40) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_F9 (0x6A,0x42) 0x44000300 0x0000005f 0x00000000 0x00000000 +GPP_F10 (0x6A,0x44) 0x44000300 0x00000060 0x00000000 0x00000000 +GPP_F11 (0x6A,0x46) 0x44000300 0x00000061 0x00000000 0x00000000 +GPP_F12 (0x6A,0x48) 0x44000300 0x00000062 0x00000000 0x00000000 +GPP_F13 (0x6A,0x4A) 0x44000300 0x00000063 0x00000000 0x00000000 +GPP_F14 (0x6A,0x4C) 0x44000300 0x00000064 0x00000000 0x00000000 +GPP_F15 (0x6A,0x4E) 0x44000300 0x00000065 0x00000000 0x00000000 +GPP_F16 (0x6A,0x50) 0x44000300 0x00000066 0x00000000 0x00000000 +GPP_F17 (0x6A,0x52) 0x84000102 0x00000067 0x00000000 0x00000000 +GPP_F18 (0x6A,0x54) 0x44000300 0x00000068 0x00000000 0x00000000 +GPP_F19 (0x6A,0x56) 0x44000300 0x00000069 0x00000000 0x00000000 +GPP_F20 (0x6A,0x58) 0x44000300 0x0003c06a 0x00000000 0x00000000 +GPP_F21 (0x6A,0x5A) 0x44000100 0x0003d06b 0x00000000 0x00000000 +GPP_F22 (0x6A,0x5C) 0x44000300 0x0003c06c 0x00000000 0x00000000 +GPP_F23 (0x6A,0x5E) 0x44000300 0x0003c06d 0x00000000 0x00000000 +GPP_E0 (0x6A,0x6E) 0x44000300 0x00000026 0x00000000 0x00000000 +GPP_E1 (0x6A,0x70) 0x84000200 0x00000027 0x00000000 0x00000000 +GPP_E2 (0x6A,0x72) 0x44000300 0x00000028 0x00000000 0x00000000 +GPP_E3 (0x6A,0x74) 0x44000102 0x00001029 0x00000000 0x00000000 +GPP_E4 (0x6A,0x76) 0x44000300 0x00000030 0x00000000 0x00000000 +GPP_E5 (0x6A,0x78) 0x44000300 0x00000031 0x00000000 0x00000000 +GPP_E6 (0x6A,0x7A) 0x44000300 0x00000032 0x00000800 0x00000000 +GPP_E7 (0x6A,0x7C) 0x44000300 0x00000033 0x00000000 0x00000000 +GPP_E8 (0x6A,0x7E) 0x44000300 0x00000034 0x00000000 0x00000000 +GPP_E9 (0x6A,0x80) 0x44000300 0x00000035 0x00000800 0x00000000 +GPP_E10 (0x6A,0x82) 0x44000300 0x00000036 0x00000900 0x00000000 +GPP_E11 (0x6A,0x84) 0x44000300 0x00000037 0x00000900 0x00000000 +GPP_E12 (0x6A,0x86) 0x44000300 0x00000038 0x00000000 0x00000000 +GPP_E13 (0x6A,0x88) 0x44000300 0x00000039 0x00000000 0x00000000 +GPP_E14 (0x6A,0x8A) 0x44000702 0x0002403a 0x00000000 0x00000000 +GPP_E15 (0x6A,0x8C) 0x44000100 0x0000103b 0x00000000 0x00000000 +GPP_E16 (0x6A,0x8E) 0x82840102 0x0000003c 0x00000000 0x00000000 +GPP_E17 (0x6A,0x90) 0x44000300 0x0000003d 0x00000000 0x00000000 +GPP_E18 (0x6A,0x92) 0x44000300 0x00003c3e 0x00000000 0x00000000 +GPP_E19 (0x6A,0x94) 0x44000300 0x00003c3f 0x00000000 0x00000000 +GPP_E20 (0x6A,0x96) 0x40880102 0x00000040 0x00000000 0x00000000 +GPP_E21 (0x6A,0x98) 0x44000300 0x00000041 0x00000000 0x00000000 +GPP_E22 (0x6A,0x9A) 0x44000300 0x00000042 0x00000000 0x00000000 +GPP_E23 (0x6A,0x9C) 0x44000300 0x00000043 0x00000000 0x00000000 +GPP_R0 (0x69,0x00) 0x44000700 0x0003c058 0x00000000 0x00000000 +GPP_R1 (0x69,0x02) 0x44000700 0x0003fc59 0x00000000 0x00000000 +GPP_R2 (0x69,0x04) 0x44000600 0x0003fc5a 0x00000000 0x00000000 +GPP_R3 (0x69,0x06) 0x44000700 0x0003fc5b 0x00000000 0x00000000 +GPP_R4 (0x69,0x08) 0x44000700 0x0003c05c 0x00000000 0x00000000 +GPP_R5 (0x69,0x0A) 0x44000300 0x0000005d 0x00000000 0x00000000 +GPP_R6 (0x69,0x0C) 0x44000300 0x0000005e 0x00000000 0x00000000 +GPP_R7 (0x69,0x0E) 0x44000300 0x0000005f 0x00000000 0x00000000 +## HDAUDIO ## +hdaudioC0D0 + vendor_name: Realtek + chip_name: ALC293 + vendor_id: 0x10ec0293 + subsystem_id: 0x155814a1 + revision_id: 0x100003 + 0x12: 0x90a60130 + 0x13: 0x40000000 + 0x14: 0x90170110 + 0x15: 0x02211020 + 0x16: 0x411111f0 + 0x18: 0x411111f0 + 0x19: 0x411111f0 + 0x1a: 0x411111f0 + 0x1b: 0x411111f0 + 0x1d: 0x41748245 + 0x1e: 0x411111f0 +hdaudioC0D2 + vendor_name: Intel + chip_name: Tigerlake HDMI + vendor_id: 0x80862812 + subsystem_id: 0x80860101 + revision_id: 0x100000 + 0x04: 0x18560010 + 0x06: 0x18560010 + 0x08: 0x18560010 + 0x0a: 0x18560010 + 0x0b: 0x18560010 + 0x0c: 0x18560010 + 0x0d: 0x18560010 + 0x0e: 0x18560010 + 0x0f: 0x18560010 diff --git a/models/lemp10/coreboot.config b/models/lemp10/coreboot.config new file mode 100644 index 0000000..a80b865 --- /dev/null +++ b/models/lemp10/coreboot.config @@ -0,0 +1,29 @@ +CONFIG_VENDOR_SYSTEM76=y +CONFIG_BOARD_SYSTEM76_LEMP10=y +CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Lemur Pro" +CONFIG_MAINBOARD_VERSION="lemp10" +CONFIG_ADD_FSP_BINARIES=y +CONFIG_CCACHE=y +CONFIG_CONSOLE_SERIAL=n +CONFIG_CPU_MICROCODE_CBFS_EXTERNAL_BINS=y +CONFIG_CPU_UCODE_BINARIES="$(FIRMWARE_OPEN_MODEL_DIR)/microcode.rom" +CONFIG_FSP_M_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_M.fd" +CONFIG_FSP_S_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Fsp_S.fd" +CONFIG_FSP_HEADER_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/FSP/Include" +CONFIG_HAVE_IFD_BIN=y +CONFIG_HAVE_ME_BIN=y +CONFIG_IFD_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/fd.rom" +CONFIG_INTEL_GMA_VBT_FILE="$(FIRMWARE_OPEN_MODEL_DIR)/vbt.rom" +CONFIG_ME_BIN_PATH="$(FIRMWARE_OPEN_MODEL_DIR)/me.rom" +CONFIG_PAYLOAD_ELF=y +CONFIG_PAYLOAD_FILE="$(FIRMWARE_OPEN_UEFIPAYLOAD)" +CONFIG_PCIEXP_HOTPLUG_MEM=0x2000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM=0x20000000 +CONFIG_PCIEXP_HOTPLUG_PREFETCH_MEM_BELOW_4G=y +CONFIG_POST_IO=n +CONFIG_RUN_FSP_GOP=y +CONFIG_SMMSTORE=y +CONFIG_SUBSYSTEM_DEVICE_ID=0x14a1 +CONFIG_SUBSYSTEM_VENDOR_ID=0x1558 +CONFIG_VALIDATE_INTEL_DESCRIPTOR=y +#CONFIG_CONSOLE_SYSTEM76_EC=y diff --git a/models/lemp10/ec.config b/models/lemp10/ec.config new file mode 100644 index 0000000..e3866fb --- /dev/null +++ b/models/lemp10/ec.config @@ -0,0 +1 @@ +BOARD=system76/lemp10 diff --git a/models/lemp10/ecspy.txt b/models/lemp10/ecspy.txt new file mode 100644 index 0000000..fc5ce85 --- /dev/null +++ b/models/lemp10/ecspy.txt @@ -0,0 +1,89 @@ +id 5570 rev 2 +A0: data 1 mirror 1 pot 0 control 80 +A1: data 0 mirror 0 pot 0 control 00 +A2: data 0 mirror 1 pot 0 control 00 +A3: data 1 mirror 1 pot 0 control 44 +A4: data 1 mirror 1 pot 0 control 80 +A5: data 1 mirror 1 pot 0 control 44 +A6: data 1 mirror 1 pot 0 control 44 +A7: data 1 mirror 1 pot 0 control 44 +B0: data 0 mirror 0 pot 0 control 84 +B1: data 1 mirror 1 pot 0 control 84 +B2: data 1 mirror 1 pot 0 control 84 +B3: data 1 mirror 1 pot 0 control 80 +B4: data 1 mirror 1 pot 0 control 40 +B5: data 1 mirror 1 pot 0 control 44 +B6: data 1 mirror 1 pot 0 control 80 +B7: data 1 mirror 1 pot 0 control 80 +C0: data 1 mirror 1 pot 0 control 80 +C1: data 1 mirror 1 pot 0 control 04 +C2: data 1 mirror 1 pot 0 control 04 +C3: data 1 mirror 1 pot 0 control 80 +C4: data 0 mirror 0 pot 0 control 84 +C5: data 1 mirror 1 pot 0 control 44 +C6: data 1 mirror 1 pot 0 control 40 +C7: data 0 mirror 0 pot 0 control 44 +D0: data 1 mirror 1 pot 0 control 44 +D1: data 1 mirror 1 pot 0 control 44 +D2: data 1 mirror 1 pot 0 control 00 +D3: data 0 mirror 0 pot 0 control 80 +D4: data 1 mirror 1 pot 0 control 44 +D5: data 1 mirror 1 pot 0 control 44 +D6: data 1 mirror 1 pot 0 control 02 +D7: data 1 mirror 1 pot 0 control 80 +E0: data 1 mirror 1 pot 0 control 00 +E1: data 1 mirror 1 pot 0 control 44 +E2: data 0 mirror 0 pot 0 control 80 +E3: data 0 mirror 0 pot 0 control 44 +E4: data 1 mirror 1 pot 0 control 42 +E5: data 1 mirror 1 pot 0 control 40 +E6: data 1 mirror 1 pot 0 control 80 +E7: data 1 mirror 1 pot 0 control 00 +F0: data 1 mirror 1 pot 0 control 44 +F1: data 1 mirror 1 pot 0 control 44 +F2: data 1 mirror 1 pot 0 control 44 +F3: data 1 mirror 1 pot 0 control 44 +F4: data 1 mirror 1 pot 0 control 04 +F5: data 1 mirror 1 pot 0 control 04 +F6: data 1 mirror 1 pot 0 control 00 +F7: data 1 mirror 1 pot 0 control 82 +G0: data 1 mirror 1 pot 0 control 80 +G1: data 1 mirror 1 pot 0 control 44 +G2: data 0 mirror 0 pot 0 control 40 +G3: data 0 mirror 0 pot 0 control 00 +G4: data 0 mirror 0 pot 0 control 00 +G5: data 0 mirror 0 pot 0 control 00 +G6: data 0 mirror 0 pot 0 control 44 +G7: data 0 mirror 0 pot 0 control 00 +H0: data 1 mirror 1 pot 0 control 80 +H1: data 1 mirror 1 pot 0 control 80 +H2: data 1 mirror 1 pot 0 control 44 +H3: data 1 mirror 1 pot 0 control 44 +H4: data 1 mirror 1 pot 0 control 80 +H5: data 0 mirror 0 pot 0 control 80 +H6: data 1 mirror 1 pot 0 control 80 +H7: data 1 mirror 1 pot 0 control 40 +I0: data 0 mirror 0 pot 0 control 00 +I1: data 0 mirror 0 pot 0 control 00 +I2: data 0 mirror 0 pot 0 control 40 +I3: data 0 mirror 0 pot 0 control 00 +I4: data 0 mirror 0 pot 0 control 00 +I5: data 1 mirror 1 pot 0 control 80 +I6: data 1 mirror 1 pot 0 control 80 +I7: data 0 mirror 0 pot 0 control 00 +J0: data 1 mirror 1 pot 0 control 80 +J1: data 1 mirror 1 pot 0 control 40 +J2: data 0 mirror 0 pot 0 control 00 +J3: data 1 mirror 1 pot 0 control 80 +J4: data 1 mirror 1 pot 0 control 40 +J5: data 1 mirror 1 pot 0 control 80 +J6: data 1 mirror 1 pot 0 control 44 +J7: data 1 mirror 1 pot 0 control 80 +M0: data 0 mirror 0 control 00 +M1: data 0 mirror 0 control 00 +M2: data 1 mirror 1 control 00 +M3: data 1 mirror 1 control 00 +M4: data 0 mirror 0 control 06 +M5: data 0 mirror 0 control 00 +M6: data 0 mirror 0 control 86 +M7: data 0 mirror 0 control 86 diff --git a/models/lemp10/edk2.config b/models/lemp10/edk2.config new file mode 100644 index 0000000..eb4f1b9 --- /dev/null +++ b/models/lemp10/edk2.config @@ -0,0 +1,2 @@ +PCIE_BASE=0xC0000000 +#SYSTEM76_EC_LOGGING=TRUE diff --git a/models/lemp10/fd.rom b/models/lemp10/fd.rom new file mode 100644 index 0000000..106bc8b --- /dev/null +++ b/models/lemp10/fd.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7fa9819ef72349dd644541d213424c05e79dc0f4a9ff8b0bc7c51e4378226774 +size 4096 diff --git a/models/lemp10/gpio.h b/models/lemp10/gpio.h new file mode 100644 index 0000000..da81dfd --- /dev/null +++ b/models/lemp10/gpio.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#ifndef MAINBOARD_GPIO_H +#define MAINBOARD_GPIO_H + +#include +#include + +#ifndef __ACPI__ + +/* Pad configuration in ramstage. */ +static const struct pad_config gpio_table[] = { + PAD_CFG_NF(GPD0, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD1, NATIVE, PWROK, NF1), + PAD_CFG_GPI(GPD2, NONE, PWROK), + PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1), + PAD_CFG_NF(GPD4, NONE, PWROK, NF1), + PAD_CFG_NF(GPD5, NONE, PWROK, NF1), + PAD_CFG_NF(GPD6, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPD7, 1, NONE, PWROK), + PAD_CFG_NF(GPD8, NONE, PWROK, NF1), + PAD_CFG_TERM_GPO(GPD9, 0, NONE, PWROK), + PAD_CFG_NF(GPD10, UP_20K, DEEP, NF1), + PAD_CFG_GPI(GPD11, UP_20K, DEEP), + PAD_CFG_NF(GPP_A0, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A2, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A3, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A4, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A5, DN_20K, DEEP, NF1), + PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), + PAD_NC(GPP_A7, NONE), + PAD_CFG_NF(GPP_A8, NONE, DEEP, NF2), + PAD_CFG_NF(GPP_A9, NONE, DEEP, NF3), + PAD_NC(GPP_A10, NONE), + PAD_NC(GPP_A11, NONE), + PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_A13, 1, NONE, PLTRST), + PAD_NC(GPP_A14, NONE), + PAD_NC(GPP_A15, NONE), + PAD_NC(GPP_A16, NONE), + PAD_NC(GPP_A17, NONE), + PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1), + PAD_NC(GPP_A19, NONE), + PAD_NC(GPP_A20, NONE), + PAD_NC(GPP_A21, NONE), + PAD_NC(GPP_A22, NONE), + PAD_CFG_TERM_GPO(GPP_A23, 0, NONE, PLTRST), + PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_B2, UP_20K, DEEP), + _PAD_CFG_STRUCT(GPP_B3, 0x80800100, 0x0000), + PAD_NC(GPP_B4, NONE), + PAD_NC(GPP_B5, NONE), + PAD_NC(GPP_B6, NONE), + PAD_NC(GPP_B7, NONE), + PAD_NC(GPP_B8, NONE), + PAD_NC(GPP_B9, NONE), + PAD_NC(GPP_B10, NONE), + PAD_CFG_NF(GPP_B11, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_B14, 0, NONE, DEEP), + PAD_NC(GPP_B15, NONE), + PAD_NC(GPP_B16, NONE), + PAD_NC(GPP_B17, NONE), + PAD_NC(GPP_B18, NONE), + PAD_NC(GPP_B19, NONE), + PAD_NC(GPP_B20, NONE), + PAD_NC(GPP_B21, NONE), + PAD_NC(GPP_B22, NONE), + PAD_CFG_TERM_GPO(GPP_B23, 0, NONE, DEEP), + PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), + PAD_CFG_TERM_GPO(GPP_C2, 1, NONE, DEEP), + PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1), + PAD_NC(GPP_C5, NONE), + PAD_CFG_NF(GPP_C6, NONE, PWROK, NF1), + PAD_CFG_NF(GPP_C7, NONE, PWROK, NF1), + PAD_NC(GPP_C8, NONE), + _PAD_CFG_STRUCT(GPP_C9, 0x40100100, 0x3000), + PAD_NC(GPP_C10, NONE), + PAD_NC(GPP_C11, NONE), + PAD_NC(GPP_C12, NONE), + PAD_CFG_TERM_GPO(GPP_C13, 1, NONE, PLTRST), + PAD_NC(GPP_C14, DN_20K), + PAD_NC(GPP_C15, NONE), + PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1), + PAD_NC(GPP_C20, NONE), + PAD_NC(GPP_C21, NONE), + PAD_CFG_TERM_GPO(GPP_C22, 1, NONE, PLTRST), + _PAD_CFG_STRUCT(GPP_C23, 0x40880100, 0x0000), + PAD_CFG_TERM_GPO(GPP_D0, 1, NONE, DEEP), + PAD_CFG_GPI(GPP_D1, NONE, DEEP), + PAD_CFG_GPI(GPP_D2, DN_20K, DEEP), + PAD_CFG_GPI(GPP_D3, DN_20K, DEEP), + PAD_NC(GPP_D4, NONE), + PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1), + _PAD_CFG_STRUCT(GPP_D9, 0x84000301, 0x0000), + PAD_NC(GPP_D10, NONE), + PAD_CFG_GPI(GPP_D11, DN_20K, DEEP), + PAD_NC(GPP_D12, NONE), + PAD_NC(GPP_D13, NONE), + PAD_CFG_TERM_GPO(GPP_D14, 1, NONE, PLTRST), + PAD_NC(GPP_D15, NONE), + PAD_NC(GPP_D16, NONE), + PAD_CFG_GPI(GPP_D17, NONE, DEEP), + PAD_CFG_GPI(GPP_D18, NONE, DEEP), + PAD_NC(GPP_D19, NONE), + PAD_NC(GPP_E0, NONE), + PAD_CFG_TERM_GPO(GPP_E1, 0, NONE, PLTRST), + PAD_NC(GPP_E2, NONE), + PAD_CFG_GPI(GPP_E3, DN_20K, DEEP), + PAD_NC(GPP_E4, NONE), + PAD_NC(GPP_E5, NONE), + PAD_NC(GPP_E6, NONE), + PAD_NC(GPP_E7, NONE), + PAD_NC(GPP_E8, NONE), + PAD_NC(GPP_E9, NONE), + PAD_NC(GPP_E10, NONE), + PAD_NC(GPP_E11, NONE), + PAD_NC(GPP_E12, NONE), + PAD_NC(GPP_E13, NONE), + PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_E15, DN_20K, DEEP), + _PAD_CFG_STRUCT(GPP_E16, 0x82840100, 0x0000), + PAD_NC(GPP_E17, NONE), + PAD_NC(GPP_E18, NATIVE), + PAD_NC(GPP_E19, NATIVE), + _PAD_CFG_STRUCT(GPP_E20, 0x40880100, 0x0000), + PAD_NC(GPP_E21, NONE), + PAD_NC(GPP_E22, NONE), + PAD_NC(GPP_E23, NONE), + PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F1, UP_20K, DEEP, NF1), + PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_F3, UP_20K, DEEP, NF1), + PAD_NC(GPP_F4, NONE), + PAD_NC(GPP_F5, NONE), + PAD_NC(GPP_F6, NONE), + PAD_NC(GPP_F7, NONE), + PAD_NC(GPP_F8, NONE), + PAD_NC(GPP_F9, NONE), + PAD_NC(GPP_F10, NONE), + PAD_NC(GPP_F11, NONE), + PAD_NC(GPP_F12, NONE), + PAD_NC(GPP_F13, NONE), + PAD_NC(GPP_F14, NONE), + PAD_NC(GPP_F15, NONE), + PAD_NC(GPP_F16, NONE), + PAD_CFG_GPI(GPP_F17, NONE, PLTRST), + PAD_NC(GPP_F18, NONE), + PAD_NC(GPP_F19, NONE), + PAD_NC(GPP_F20, NONE), + PAD_CFG_GPI(GPP_F21, DN_20K, DEEP), + PAD_NC(GPP_F22, NONE), + PAD_NC(GPP_F23, NONE), + PAD_NC(GPP_H0, DN_20K), + PAD_NC(GPP_H1, DN_20K), + PAD_NC(GPP_H2, DN_20K), + PAD_CFG_GPI(GPP_H3, DN_20K, DEEP), + PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1), + PAD_CFG_GPI(GPP_H6, NONE, DEEP), + PAD_NC(GPP_H7, NONE), + PAD_CFG_GPI(GPP_H8, DN_20K, DEEP), + PAD_CFG_GPI(GPP_H9, DN_20K, DEEP), + PAD_NC(GPP_H10, NONE), + PAD_NC(GPP_H11, NONE), + PAD_NC(GPP_H12, NONE), + PAD_NC(GPP_H13, NONE), + PAD_NC(GPP_H14, NONE), + PAD_NC(GPP_H15, NONE), + PAD_CFG_NF(GPP_H16, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_H18, NONE, DEEP, NF1), + PAD_NC(GPP_H19, NONE), + PAD_NC(GPP_H20, NONE), + PAD_NC(GPP_H21, NONE), + PAD_NC(GPP_H22, NONE), + PAD_NC(GPP_H23, NONE), + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF1), + PAD_CFG_NF(GPP_R1, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R2, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R3, NATIVE, DEEP, NF1), + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF1), + PAD_NC(GPP_R5, NONE), + PAD_NC(GPP_R6, NONE), + PAD_NC(GPP_R7, NONE), + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), + PAD_NC(GPP_S4, NONE), + PAD_NC(GPP_S5, NONE), + PAD_CFG_GPI(GPP_S6, NONE, DEEP), + PAD_CFG_GPI(GPP_S7, NONE, DEEP), + PAD_NC(GPP_T2, NONE), + PAD_NC(GPP_T3, NONE), + PAD_NC(GPP_U4, NONE), + PAD_NC(GPP_U5, NONE), +}; + +#endif + +#endif diff --git a/models/lemp10/hda_verb.c b/models/lemp10/hda_verb.c new file mode 100644 index 0000000..5c264bf --- /dev/null +++ b/models/lemp10/hda_verb.c @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include + +const u32 cim_verb_data[] = { + /* Realtek, ALC293 */ + 0x10ec0293, /* Vendor ID */ + 0x155814a1, /* Subsystem ID */ + 12, /* Number of entries */ + AZALIA_SUBVENDOR(0, 0x155814a1), + AZALIA_PIN_CFG(0, 0x12, 0x90a60130), + AZALIA_PIN_CFG(0, 0x13, 0x40000000), + AZALIA_PIN_CFG(0, 0x14, 0x90170110), + AZALIA_PIN_CFG(0, 0x15, 0x02211020), + AZALIA_PIN_CFG(0, 0x16, 0x411111f0), + AZALIA_PIN_CFG(0, 0x18, 0x411111f0), + AZALIA_PIN_CFG(0, 0x19, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1b, 0x411111f0), + AZALIA_PIN_CFG(0, 0x1d, 0x41748245), + AZALIA_PIN_CFG(0, 0x1e, 0x411111f0), + /* Intel, TigerlakeHDMI */ + 0x80862812, /* Vendor ID */ + 0x80860101, /* Subsystem ID */ + 10, /* Number of entries */ + AZALIA_SUBVENDOR(2, 0x80860101), + AZALIA_PIN_CFG(2, 0x04, 0x18560010), + AZALIA_PIN_CFG(2, 0x06, 0x18560010), + AZALIA_PIN_CFG(2, 0x08, 0x18560010), + AZALIA_PIN_CFG(2, 0x0a, 0x18560010), + AZALIA_PIN_CFG(2, 0x0b, 0x18560010), + AZALIA_PIN_CFG(2, 0x0c, 0x18560010), + AZALIA_PIN_CFG(2, 0x0d, 0x18560010), + AZALIA_PIN_CFG(2, 0x0e, 0x18560010), + AZALIA_PIN_CFG(2, 0x0f, 0x18560010), +}; + +const u32 pc_beep_verbs[] = {}; + +AZALIA_ARRAY_SIZES; diff --git a/models/lemp10/me.rom b/models/lemp10/me.rom new file mode 100644 index 0000000..b8078fc --- /dev/null +++ b/models/lemp10/me.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:ab9fa597e787d5662ed88b19e866f0fc11e64a593cba4cc39c30748af84ee885 +size 5238784 diff --git a/models/lemp10/microcode.rom b/models/lemp10/microcode.rom new file mode 100644 index 0000000..6ec2b90 --- /dev/null +++ b/models/lemp10/microcode.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:dc4cd808a0e1705603bbecca807194d3e24b3cce8c6d62f6671e4cda5e7bd955 +size 107520 diff --git a/models/lemp10/usb4-pd.rom b/models/lemp10/usb4-pd.rom new file mode 100644 index 0000000..fdd6133 --- /dev/null +++ b/models/lemp10/usb4-pd.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:7f41aa745e4237ac6ffcb9966113c6fb81efbe115c77344cbd58b00dbf2841c8 +size 32768 diff --git a/models/lemp10/usb4-retimer.rom b/models/lemp10/usb4-retimer.rom new file mode 100644 index 0000000..c10fc69 --- /dev/null +++ b/models/lemp10/usb4-retimer.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:eb32c5d705fb5c8c70c01d48606164d4e738811877ec7c399bbd264331a4b6d0 +size 1048576 diff --git a/models/lemp10/vbt.rom b/models/lemp10/vbt.rom new file mode 100644 index 0000000..24d221c --- /dev/null +++ b/models/lemp10/vbt.rom @@ -0,0 +1,3 @@ +version https://git-lfs.github.com/spec/v1 +oid sha256:2d66a84831f8675d7052b37c7943cae0f5475d50f11ec726814e8b5e7caa6659 +size 8704