sravan/Marlin-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #9143 from thinkyhead/bf1_Creality_CR-10S

Browse Source 
[1.1.x] Creality CR-10S configurations
This commit is contained in:
Scott Lahteine
2018-01-11 01:24:44 -06:00
committed by GitHub
parent 044938bfd0 e8b1bbac83
commit 59d48b9b1f
4 changed files with 3371 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
Marlin/Configuration.h
View File

@@ -94,7 +94,7 @@
// @section machine
/**
* Select which serial port on the board will be used for communication with the host.
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
*
@@ -1627,12 +1627,11 @@
//#define CR10_STOCKDISPLAY
//
// MKS OLED 1.3" 128x64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
//
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller

1772
Marlin/example_configurations/Creality/CR-10S/Configuration.h Normal file
View File

File diff suppressed because it is too large Load Diff

1594
Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h Normal file
View File

File diff suppressed because it is too large Load Diff

5
Marlin/example_configurations/Tronxy/X1/Configuration.h
View File

@@ -94,7 +94,7 @@
// @section machine
/**
* Select which serial port on the board will be used for communication with the host.
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.
* Serial port 0 is always used by the Arduino bootloader regardless of this setting.
*
@@ -1627,11 +1627,10 @@
//#define CR10_STOCKDISPLAY
//
// MKS OLED 1.3" 128 x 64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
// http://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
// If there is a pixel shift, try the other controller.
//
//#define MKS_12864OLED // Uses the SH1106 controller (default)
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller