🔧 BIQU MicroProbe V2 pull-up warning (#27008)

This commit is contained in:
Keith Bennett
2024-04-23 17:19:02 -07:00
committed by GitHub
parent a36f72e886
commit 882421a03e

View File

@@ -694,6 +694,10 @@
#error "Z_SAFE_HOMING is recommended when homing with a probe. Enable Z_SAFE_HOMING or comment out this line to continue."
#endif
#if ENABLED(BIQU_MICROPROBE_V2) && NONE(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, NO_MICROPROBE_WARNING)
#warning "BIQU MicroProbe V2 detect signal requires a strong pull-up. Some processors have weak internal pull-up capabilities, so we recommended connecting MicroProbe SIGNAL / GND to Z-MIN / Z-STOP instead of the dedicated PROBE port. (Define NO_MICROPROBE_WARNING to suppress this warning.)"
#endif
//
// Warn users of potential endstop/DIAG pin conflicts to prevent homing issues when not using sensorless homing
//