🚸 ExtUI: Shaping, Probing limits (#26754)

Marlin/src/HAL/AVR/HAL.h

@@ -141,7 +141,7 @@ typedef Servo hal_servo_t;
     #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
   #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
 #endif

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
   template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
   MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);
 
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     template<typename Cfg>
     typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
       const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -205,7 +205,7 @@
     static ring_buffer_pos_t available();
     static void write(const uint8_t c);
     static void flushTX();
-    #if HAS_DGUS_LCD
+    #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
       static ring_buffer_pos_t get_tx_buffer_free();
     #endif
 

Marlin/src/HAL/LPC1768/HAL.h

@@ -100,7 +100,7 @@ extern DefaultSerial1 USBSerial;
   #else
     #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
   #endif
 #endif

Marlin/src/HAL/STM32/HAL.h

@@ -112,7 +112,7 @@
   #else
     #error "LCD_SERIAL_PORT must be from 1 to 9, or -1 for Native USB."
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
   #endif
 #endif

Marlin/src/HAL/STM32F1/HAL.h

@@ -138,7 +138,7 @@
     #define LCD_SERIAL MSERIAL(1) // dummy port
     static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ". You can also use -1 if the board supports Native USB.")
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
   #endif
 #endif

Marlin/src/gcode/probe/G30.cpp

@@ -34,7 +34,7 @@
   #include "../../feature/probe_temp_comp.h"
 #endif
 
-#if ANY(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ANY(DWIN_CREALITY_LCD_JYERSUI, EXTENSIBLE_UI)
   #define VERBOSE_SINGLE_PROBE
 #endif
 

Marlin/src/lcd/extui/ui_api.cpp

@@ -765,6 +765,24 @@ namespace ExtUI {
     }
   #endif
 
+  #if HAS_SHAPING
+    float getShapingZeta(const axis_t axis) {
+      return stepper.get_shaping_damping_ratio(AxisEnum(axis));
+    }
+    void setShapingZeta(const float zeta, const axis_t axis) {
+      if (!WITHIN(zeta, 0, 1)) return;
+      stepper.set_shaping_damping_ratio(AxisEnum(axis), zeta);
+    }
+    float getShapingFrequency(const axis_t axis) {
+      return stepper.get_shaping_frequency(AxisEnum(axis));
+    }
+    void setShapingFrequency(const float freq, const axis_t axis) {
+      constexpr float min_freq = float(uint32_t(STEPPER_TIMER_RATE) / 2) / shaping_time_t(-2);
+      if (freq == 0.0f || freq > min_freq)
+        stepper.set_shaping_frequency(AxisEnum(axis), freq);
+    }
+  #endif
+
   #if HAS_JUNCTION_DEVIATION
 
     float getJunctionDeviation_mm() { return planner.junction_deviation_mm; }
@@ -933,6 +951,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; }
     void setProbeOffset_mm(const_float_t val, const axis_t axis) { probe.offset.pos[axis] = val; }
+    probe_limits_t getBedProbeLimits() { return probe_limits_t({ probe.min_x(), probe.min_y(), probe.max_x(), probe.max_y() }); }
   #endif
 
   #if ENABLED(BACKLASH_GCODE)

Marlin/src/lcd/extui/ui_api.h

@@ -74,6 +74,7 @@ namespace ExtUI {
   #if ENABLED(MPC_AUTOTUNE)
     enum mpcresult_t : uint8_t { MPC_STARTED, MPC_TEMP_ERROR, MPC_INTERRUPTED, MPC_DONE };
   #endif
+  struct probe_limits_t { float xmin, ymin, xmax, ymax; };
 
   constexpr uint8_t extruderCount = EXTRUDERS;
   constexpr uint8_t hotendCount   = HOTENDS;
@@ -327,6 +328,13 @@ namespace ExtUI {
     void setLinearAdvance_mm_mm_s(const_float_t, const extruder_t);
   #endif
 
+  #if HAS_SHAPING
+    float getShapingZeta(const axis_t);
+    void setShapingZeta(const float, const axis_t);
+    float getShapingFrequency(const axis_t);
+    void setShapingFrequency(const float, const axis_t);
+  #endif
+
   // JD or Jerk Control
   #if HAS_JUNCTION_DEVIATION
     float getJunctionDeviation_mm();
@@ -367,6 +375,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t);
     void setProbeOffset_mm(const_float_t, const axis_t);
+    probe_limits_t getBedProbeLimits();
   #endif
 
   // Backlash Control