Announcing Marlin 1.1 RC1

Update version strings to 1.0.2

.gitignore

@@ -4,3 +4,5 @@ applet/
 *.orig
 *.rej
 *.bak
+*.DS_Store
+*.idea

.travis.yml

@@ -2,13 +2,159 @@
 language: c
 
 before_install:
-  - sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
-  - sudo apt-get update -qq
+  - pwd
+  - wget https://bootstrap.pypa.io/get-pip.py
+  - wget https://bintray.com/artifact/download/olikraus/u8glib/u8glib_arduino_v1.17.zip
 install:
-  - sudo apt-get install -qq gcc-avr binutils-avr avr-libc gcc-4.8 g++-4.8 arduino
-  - sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 90
-  - sudo update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-4.8 90
-  - gcc --version
-  - g++ --version
-
-script: "cd Marlin && make HARDWARE_MOTHERBOARD=70 ARDUINO_INSTALL_DIR=/usr/share/arduino"
+  - sudo python get-pip.py
+  - sudo pip install ino
+  # add ppa for newer version of Arduino than available in ubuntu 12.04
+  - sudo add-apt-repository ppa:michael-gruz/elektronik -y
+  - sudo apt-get update -q 
+  - sudo apt-get install arduino
+before_script:
+ # add U8glib, LiquidCrystal_I2C & LiquidTWI2 libraries 
+  - sudo unzip u8glib_arduino_v1.17.zip -d /usr/share/arduino/libraries/
+  - cd /usr/share/arduino/libraries/
+  - sudo git clone https://github.com/kiyoshigawa/LiquidCrystal_I2C.git
+  - ls -la
+  - ls -la LiquidCrystal_I2C/
+  - sudo git clone https://github.com/lincomatic/LiquidTWI2.git
+  # remove Robot_Control library to stop compile error!
+  - sudo rm -rf /usr/share/arduino/libraries/Robot_Control
+  # change back to home directory for compiling
+  - cd $TRAVIS_BUILD_DIR
+  # ino needs files in src directory
+  - ln -s Marlin src
+  # remove Marlin.pde as it confuses ino after it finds Marlin.ino
+  - rm Marlin/Marlin.pde
+script:
+  # build default config
+  - ino build -m mega2560
+  # backup configuration.h
+  - cp Marlin/Configuration.h Marlin/Configuration.h.backup
+  - cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
+  # change extruder numbers from 1 to 2
+  # commented out for the moment fails build but compiles fine in Arduino
+  #- sed -i 's/#define EXTRUDERS 1/#define EXTRUDERS 2/g' Marlin/Configuration.h
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # change extruder numbers from 2 to 3, needs to be a board with 3 extruders defined in pins.h 
+  #- sed -i 's/#define MOTHERBOARD BOARD_ULTIMAKER/#define MOTHERBOARD BOARD_AZTEEG_X3_PRO/g' Marlin/Configuration.h
+  #- sed -i 's/#define EXTRUDERS 2/#define EXTRUDERS 3/g' Marlin/Configuration.h
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # enable PIDTEMPBED 
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define PIDTEMPBED/#define PIDTEMPBED/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable THERMAL RUNAWAY PROTECTION for extruders & bed
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_PERIOD/#define THERMAL_RUNAWAY_PROTECTION_PERIOD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS/#define THERMAL_RUNAWAY_PROTECTION_HYSTERESIS/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD/#define THERMAL_RUNAWAY_PROTECTION_BED_PERIOD/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS/#define THERMAL_RUNAWAY_PROTECTION_BED_HYSTERESIS/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable AUTO_BED_LEVELING
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ENABLE_AUTO_BED_LEVELING/#define ENABLE_AUTO_BED_LEVELING/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # enable EEPROM_SETTINGS & EEPROM_CHITCHAT
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define EEPROM_SETTINGS/#define EEPROM_SETTINGS/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define EEPROM_CHITCHAT/#define EEPROM_CHITCHAT/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ### LCDS ###
+  # ULTIMAKERCONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ULTIMAKERCONTROLLER/#define ULTIMAKERCONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # MAKRPANEL
+  # Needs to use melzi and sanguino hardware
+  #- cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  #- sed -i 's/\/\/#define MAKRPANEL/#define MAKRPANEL/g' Marlin/Configuration.h
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # REPRAP_DISCOUNT_SMART_CONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAP_DISCOUNT_SMART_CONTROLLER/#define REPRAP_DISCOUNT_SMART_CONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # G3D_PANE
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define G3D_PANEL/#define G3D_PANEL/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER/#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # REPRAPWORLD_KEYPAD 
+  # Cant find configuration details to get it to compile
+  #- cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  #- sed -i 's/\/\/#define ULTRA_LCD/#define ULTRA_LCD/g' Marlin/Configuration.h
+  #- sed -i 's/\/\/#define REPRAPWORLD_KEYPAD/#define REPRAPWORLD_KEYPAD/g' Marlin/Configuration.h
+  #- sed -i 's/\/\/#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0/#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0/g' Marlin/Configuration.h
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # RA_CONTROL_PANEL
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define RA_CONTROL_PANEL/#define RA_CONTROL_PANEL/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ### I2C PANELS ###
+  # LCD_I2C_SAINSMART_YWROBOT
+  # Failing at the moment needs different library 
+  #- cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  #- sed -i 's/\/\/#define LCD_I2C_SAINSMART_YWROBOT/#define LCD_I2C_SAINSMART_YWROBOT/g' Marlin/Configuration.h
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # LCD_I2C_PANELOLU2
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define LCD_I2C_PANELOLU2/#define LCD_I2C_PANELOLU2/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # LCD_I2C_VIKI
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define LCD_I2C_VIKI/#define LCD_I2C_VIKI/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  # Enable filament sensor
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_SENSOR/#define FILAMENT_SENSOR/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+   # Enable filament sensor with LCD display
+  - cp Marlin/Configuration.h.backup Marlin/Configuration.h
+  - sed -i 's/\/\/#define ULTIMAKERCONTROLLER/#define ULTIMAKERCONTROLLER/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_SENSOR/#define FILAMENT_SENSOR/g' Marlin/Configuration.h
+  - sed -i 's/\/\/#define FILAMENT_LCD_DISPLAY/#define FILAMENT_LCD_DISPLAY/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m mega2560
+  ######## Example Configurations ##############
+  # Delta Config
+  - cp Marlin/example_configurations/delta/Configuration* Marlin/
+  - rm -rf .build/
+  - ino build -m mega2560
+  # Makibox Config  need to check board type for Teensy++ 2.0
+  #- cp Marlin/example_configurations/makibox/Configuration* Marlin/
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  # SCARA Config
+  - cp Marlin/example_configurations/SCARA/Configuration* Marlin/
+  - rm -rf .build/
+  - ino build -m mega2560
+  # tvrrug Config need to check board type for sanguino atmega644p
+  #- cp Marlin/example_configurations/tvrrug/Round2/Configuration* Marlin/
+  #- rm -rf .build/
+  #- ino build -m mega2560
+  ######## Board Types #############
+  - sed -i 's/#define MOTHERBOARD BOARD_RAMPS_13_EFB/#define MOTHERBOARD BOARD_DUEMILANOVE_328P/g' Marlin/Configuration.h
+  - rm -rf .build/
+  - ino build -m atmega328

COPYING.md

@@ -0,0 +1,596 @@
+GNU GENERAL PUBLIC LICENSE
+==========================
+
+Version 3, 29 June 2007
+
+Copyright &copy; 2007 Free Software Foundation, Inc. &lt;<http://fsf.org/>&gt;
+
+Everyone is permitted to copy and distribute verbatim copies of this license
+document, but changing it is not allowed.
+
+## Preamble
+
+The GNU General Public License is a free, copyleft license for software and other
+kinds of works.
+
+The licenses for most software and other practical works are designed to take away
+your freedom to share and change the works. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change all versions of a
+program--to make sure it remains free software for all its users. We, the Free
+Software Foundation, use the GNU General Public License for most of our software; it
+applies also to any other work released this way by its authors. You can apply it to
+your programs, too.
+
+When we speak of free software, we are referring to freedom, not price. Our General
+Public Licenses are designed to make sure that you have the freedom to distribute
+copies of free software (and charge for them if you wish), that you receive source
+code or can get it if you want it, that you can change the software or use pieces of
+it in new free programs, and that you know you can do these things.
+
+To protect your rights, we need to prevent others from denying you these rights or
+asking you to surrender the rights. Therefore, you have certain responsibilities if
+you distribute copies of the software, or if you modify it: responsibilities to
+respect the freedom of others.
+
+For example, if you distribute copies of such a program, whether gratis or for a fee,
+you must pass on to the recipients the same freedoms that you received. You must make
+sure that they, too, receive or can get the source code. And you must show them these
+terms so they know their rights.
+
+Developers that use the GNU GPL protect your rights with two steps: (1) assert
+copyright on the software, and (2) offer you this License giving you legal permission
+to copy, distribute and/or modify it.
+
+For the developers' and authors' protection, the GPL clearly explains that there is
+no warranty for this free software. For both users' and authors' sake, the GPL
+requires that modified versions be marked as changed, so that their problems will not
+be attributed erroneously to authors of previous versions.
+
+Some devices are designed to deny users access to install or run modified versions of
+the software inside them, although the manufacturer can do so. This is fundamentally
+incompatible with the aim of protecting users' freedom to change the software. The
+systematic pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable. Therefore, we have designed
+this version of the GPL to prohibit the practice for those products. If such problems
+arise substantially in other domains, we stand ready to extend this provision to
+those domains in future versions of the GPL, as needed to protect the freedom of
+users.
+
+Finally, every program is threatened constantly by software patents. States should
+not allow patents to restrict development and use of software on general-purpose
+computers, but in those that do, we wish to avoid the special danger that patents
+applied to a free program could make it effectively proprietary. To prevent this, the
+GPL assures that patents cannot be used to render the program non-free.
+
+The precise terms and conditions for copying, distribution and modification follow.
+
+## TERMS AND CONDITIONS
+
+### 0. Definitions.
+
+&ldquo;This License&rdquo; refers to version 3 of the GNU General Public License.
+
+&ldquo;Copyright&rdquo; also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+&ldquo;The Program&rdquo; refers to any copyrightable work licensed under this
+License. Each licensee is addressed as &ldquo;you&rdquo;. &ldquo;Licensees&rdquo; and
+&ldquo;recipients&rdquo; may be individuals or organizations.
+
+To &ldquo;modify&rdquo; a work means to copy from or adapt all or part of the work in
+a fashion requiring copyright permission, other than the making of an exact copy. The
+resulting work is called a &ldquo;modified version&rdquo; of the earlier work or a
+work &ldquo;based on&rdquo; the earlier work.
+
+A &ldquo;covered work&rdquo; means either the unmodified Program or a work based on
+the Program.
+
+To &ldquo;propagate&rdquo; a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for infringement under
+applicable copyright law, except executing it on a computer or modifying a private
+copy. Propagation includes copying, distribution (with or without modification),
+making available to the public, and in some countries other activities as well.
+
+To &ldquo;convey&rdquo; a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user through a computer
+network, with no transfer of a copy, is not conveying.
+
+An interactive user interface displays &ldquo;Appropriate Legal Notices&rdquo; to the
+extent that it includes a convenient and prominently visible feature that (1)
+displays an appropriate copyright notice, and (2) tells the user that there is no
+warranty for the work (except to the extent that warranties are provided), that
+licensees may convey the work under this License, and how to view a copy of this
+License. If the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+### 1. Source Code.
+
+The &ldquo;source code&rdquo; for a work means the preferred form of the work for
+making modifications to it. &ldquo;Object code&rdquo; means any non-source form of a
+work.
+
+A &ldquo;Standard Interface&rdquo; means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of interfaces
+specified for a particular programming language, one that is widely used among
+developers working in that language.
+
+The &ldquo;System Libraries&rdquo; of an executable work include anything, other than
+the work as a whole, that (a) is included in the normal form of packaging a Major
+Component, but which is not part of that Major Component, and (b) serves only to
+enable use of the work with that Major Component, or to implement a Standard
+Interface for which an implementation is available to the public in source code form.
+A &ldquo;Major Component&rdquo;, in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system (if any) on which
+the executable work runs, or a compiler used to produce the work, or an object code
+interpreter used to run it.
+
+The &ldquo;Corresponding Source&rdquo; for a work in object code form means all the
+source code needed to generate, install, and (for an executable work) run the object
+code and to modify the work, including scripts to control those activities. However,
+it does not include the work's System Libraries, or general-purpose tools or
+generally available free programs which are used unmodified in performing those
+activities but which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for the work, and
+the source code for shared libraries and dynamically linked subprograms that the work
+is specifically designed to require, such as by intimate data communication or
+control flow between those subprograms and other parts of the work.
+
+The Corresponding Source need not include anything that users can regenerate
+automatically from other parts of the Corresponding Source.
+
+The Corresponding Source for a work in source code form is that same work.
+
+### 2. Basic Permissions.
+
+All rights granted under this License are granted for the term of copyright on the
+Program, and are irrevocable provided the stated conditions are met. This License
+explicitly affirms your unlimited permission to run the unmodified Program. The
+output from running a covered work is covered by this License only if the output,
+given its content, constitutes a covered work. This License acknowledges your rights
+of fair use or other equivalent, as provided by copyright law.
+
+You may make, run and propagate covered works that you do not convey, without
+conditions so long as your license otherwise remains in force. You may convey covered
+works to others for the sole purpose of having them make modifications exclusively
+for you, or provide you with facilities for running those works, provided that you
+comply with the terms of this License in conveying all material for which you do not
+control copyright. Those thus making or running the covered works for you must do so
+exclusively on your behalf, under your direction and control, on terms that prohibit
+them from making any copies of your copyrighted material outside their relationship
+with you.
+
+Conveying under any other circumstances is permitted solely under the conditions
+stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
+
+### 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+No covered work shall be deemed part of an effective technological measure under any
+applicable law fulfilling obligations under article 11 of the WIPO copyright treaty
+adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention
+of such measures.
+
+When you convey a covered work, you waive any legal power to forbid circumvention of
+technological measures to the extent such circumvention is effected by exercising
+rights under this License with respect to the covered work, and you disclaim any
+intention to limit operation or modification of the work as a means of enforcing,
+against the work's users, your or third parties' legal rights to forbid circumvention
+of technological measures.
+
+### 4. Conveying Verbatim Copies.
+
+You may convey verbatim copies of the Program's source code as you receive it, in any
+medium, provided that you conspicuously and appropriately publish on each copy an
+appropriate copyright notice; keep intact all notices stating that this License and
+any non-permissive terms added in accord with section 7 apply to the code; keep
+intact all notices of the absence of any warranty; and give all recipients a copy of
+this License along with the Program.
+
+You may charge any price or no price for each copy that you convey, and you may offer
+support or warranty protection for a fee.
+
+### 5. Conveying Modified Source Versions.
+
+You may convey a work based on the Program, or the modifications to produce it from
+the Program, in the form of source code under the terms of section 4, provided that
+you also meet all of these conditions:
+
+* **a)** The work must carry prominent notices stating that you modified it, and giving a
+relevant date.
+* **b)** The work must carry prominent notices stating that it is released under this
+License and any conditions added under section 7. This requirement modifies the
+requirement in section 4 to &ldquo;keep intact all notices&rdquo;.
+* **c)** You must license the entire work, as a whole, under this License to anyone who
+comes into possession of a copy. This License will therefore apply, along with any
+applicable section 7 additional terms, to the whole of the work, and all its parts,
+regardless of how they are packaged. This License gives no permission to license the
+work in any other way, but it does not invalidate such permission if you have
+separately received it.
+* **d)** If the work has interactive user interfaces, each must display Appropriate Legal
+Notices; however, if the Program has interactive interfaces that do not display
+Appropriate Legal Notices, your work need not make them do so.
+
+A compilation of a covered work with other separate and independent works, which are
+not by their nature extensions of the covered work, and which are not combined with
+it such as to form a larger program, in or on a volume of a storage or distribution
+medium, is called an &ldquo;aggregate&rdquo; if the compilation and its resulting
+copyright are not used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work in an aggregate
+does not cause this License to apply to the other parts of the aggregate.
+
+### 6. Conveying Non-Source Forms.
+
+You may convey a covered work in object code form under the terms of sections 4 and
+5, provided that you also convey the machine-readable Corresponding Source under the
+terms of this License, in one of these ways:
+
+* **a)** Convey the object code in, or embodied in, a physical product (including a
+physical distribution medium), accompanied by the Corresponding Source fixed on a
+durable physical medium customarily used for software interchange.
+* **b)** Convey the object code in, or embodied in, a physical product (including a
+physical distribution medium), accompanied by a written offer, valid for at least
+three years and valid for as long as you offer spare parts or customer support for
+that product model, to give anyone who possesses the object code either (1) a copy of
+the Corresponding Source for all the software in the product that is covered by this
+License, on a durable physical medium customarily used for software interchange, for
+a price no more than your reasonable cost of physically performing this conveying of
+source, or (2) access to copy the Corresponding Source from a network server at no
+charge.
+* **c)** Convey individual copies of the object code with a copy of the written offer to
+provide the Corresponding Source. This alternative is allowed only occasionally and
+noncommercially, and only if you received the object code with such an offer, in
+accord with subsection 6b.
+* **d)** Convey the object code by offering access from a designated place (gratis or for
+a charge), and offer equivalent access to the Corresponding Source in the same way
+through the same place at no further charge. You need not require recipients to copy
+the Corresponding Source along with the object code. If the place to copy the object
+code is a network server, the Corresponding Source may be on a different server
+(operated by you or a third party) that supports equivalent copying facilities,
+provided you maintain clear directions next to the object code saying where to find
+the Corresponding Source. Regardless of what server hosts the Corresponding Source,
+you remain obligated to ensure that it is available for as long as needed to satisfy
+these requirements.
+* **e)** Convey the object code using peer-to-peer transmission, provided you inform
+other peers where the object code and Corresponding Source of the work are being
+offered to the general public at no charge under subsection 6d.
+
+A separable portion of the object code, whose source code is excluded from the
+Corresponding Source as a System Library, need not be included in conveying the
+object code work.
+
+A &ldquo;User Product&rdquo; is either (1) a &ldquo;consumer product&rdquo;, which
+means any tangible personal property which is normally used for personal, family, or
+household purposes, or (2) anything designed or sold for incorporation into a
+dwelling. In determining whether a product is a consumer product, doubtful cases
+shall be resolved in favor of coverage. For a particular product received by a
+particular user, &ldquo;normally used&rdquo; refers to a typical or common use of
+that class of product, regardless of the status of the particular user or of the way
+in which the particular user actually uses, or expects or is expected to use, the
+product. A product is a consumer product regardless of whether the product has
+substantial commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+&ldquo;Installation Information&rdquo; for a User Product means any methods,
+procedures, authorization keys, or other information required to install and execute
+modified versions of a covered work in that User Product from a modified version of
+its Corresponding Source. The information must suffice to ensure that the continued
+functioning of the modified object code is in no case prevented or interfered with
+solely because modification has been made.
+
+If you convey an object code work under this section in, or with, or specifically for
+use in, a User Product, and the conveying occurs as part of a transaction in which
+the right of possession and use of the User Product is transferred to the recipient
+in perpetuity or for a fixed term (regardless of how the transaction is
+characterized), the Corresponding Source conveyed under this section must be
+accompanied by the Installation Information. But this requirement does not apply if
+neither you nor any third party retains the ability to install modified object code
+on the User Product (for example, the work has been installed in ROM).
+
+The requirement to provide Installation Information does not include a requirement to
+continue to provide support service, warranty, or updates for a work that has been
+modified or installed by the recipient, or for the User Product in which it has been
+modified or installed. Access to a network may be denied when the modification itself
+materially and adversely affects the operation of the network or violates the rules
+and protocols for communication across the network.
+
+Corresponding Source conveyed, and Installation Information provided, in accord with
+this section must be in a format that is publicly documented (and with an
+implementation available to the public in source code form), and must require no
+special password or key for unpacking, reading or copying.
+
+### 7. Additional Terms.
+
+&ldquo;Additional permissions&rdquo; are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions. Additional
+permissions that are applicable to the entire Program shall be treated as though they
+were included in this License, to the extent that they are valid under applicable
+law. If additional permissions apply only to part of the Program, that part may be
+used separately under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+When you convey a copy of a covered work, you may at your option remove any
+additional permissions from that copy, or from any part of it. (Additional
+permissions may be written to require their own removal in certain cases when you
+modify the work.) You may place additional permissions on material, added by you to a
+covered work, for which you have or can give appropriate copyright permission.
+
+Notwithstanding any other provision of this License, for material you add to a
+covered work, you may (if authorized by the copyright holders of that material)
+supplement the terms of this License with terms:
+
+* **a)** Disclaiming warranty or limiting liability differently from the terms of
+sections 15 and 16 of this License; or
+* **b)** Requiring preservation of specified reasonable legal notices or author
+attributions in that material or in the Appropriate Legal Notices displayed by works
+containing it; or
+* **c)** Prohibiting misrepresentation of the origin of that material, or requiring that
+modified versions of such material be marked in reasonable ways as different from the
+original version; or
+* **d)** Limiting the use for publicity purposes of names of licensors or authors of the
+material; or
+* **e)** Declining to grant rights under trademark law for use of some trade names,
+trademarks, or service marks; or
+* **f)** Requiring indemnification of licensors and authors of that material by anyone
+who conveys the material (or modified versions of it) with contractual assumptions of
+liability to the recipient, for any liability that these contractual assumptions
+directly impose on those licensors and authors.
+
+All other non-permissive additional terms are considered &ldquo;further
+restrictions&rdquo; within the meaning of section 10. If the Program as you received
+it, or any part of it, contains a notice stating that it is governed by this License
+along with a term that is a further restriction, you may remove that term. If a
+license document contains a further restriction but permits relicensing or conveying
+under this License, you may add to a covered work material governed by the terms of
+that license document, provided that the further restriction does not survive such
+relicensing or conveying.
+
+If you add terms to a covered work in accord with this section, you must place, in
+the relevant source files, a statement of the additional terms that apply to those
+files, or a notice indicating where to find the applicable terms.
+
+Additional terms, permissive or non-permissive, may be stated in the form of a
+separately written license, or stated as exceptions; the above requirements apply
+either way.
+
+### 8. Termination.
+
+You may not propagate or modify a covered work except as expressly provided under
+this License. Any attempt otherwise to propagate or modify it is void, and will
+automatically terminate your rights under this License (including any patent licenses
+granted under the third paragraph of section 11).
+
+However, if you cease all violation of this License, then your license from a
+particular copyright holder is reinstated (a) provisionally, unless and until the
+copyright holder explicitly and finally terminates your license, and (b) permanently,
+if the copyright holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is reinstated permanently
+if the copyright holder notifies you of the violation by some reasonable means, this
+is the first time you have received notice of violation of this License (for any
+work) from that copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the licenses of
+parties who have received copies or rights from you under this License. If your
+rights have been terminated and not permanently reinstated, you do not qualify to
+receive new licenses for the same material under section 10.
+
+### 9. Acceptance Not Required for Having Copies.
+
+You are not required to accept this License in order to receive or run a copy of the
+Program. Ancillary propagation of a covered work occurring solely as a consequence of
+using peer-to-peer transmission to receive a copy likewise does not require
+acceptance. However, nothing other than this License grants you permission to
+propagate or modify any covered work. These actions infringe copyright if you do not
+accept this License. Therefore, by modifying or propagating a covered work, you
+indicate your acceptance of this License to do so.
+
+### 10. Automatic Licensing of Downstream Recipients.
+
+Each time you convey a covered work, the recipient automatically receives a license
+from the original licensors, to run, modify and propagate that work, subject to this
+License. You are not responsible for enforcing compliance by third parties with this
+License.
+
+An &ldquo;entity transaction&rdquo; is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an organization, or
+merging organizations. If propagation of a covered work results from an entity
+transaction, each party to that transaction who receives a copy of the work also
+receives whatever licenses to the work the party's predecessor in interest had or
+could give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if the predecessor
+has it or can get it with reasonable efforts.
+
+You may not impose any further restrictions on the exercise of the rights granted or
+affirmed under this License. For example, you may not impose a license fee, royalty,
+or other charge for exercise of rights granted under this License, and you may not
+initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging
+that any patent claim is infringed by making, using, selling, offering for sale, or
+importing the Program or any portion of it.
+
+### 11. Patents.
+
+A &ldquo;contributor&rdquo; is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The work thus
+licensed is called the contributor's &ldquo;contributor version&rdquo;.
+
+A contributor's &ldquo;essential patent claims&rdquo; are all patent claims owned or
+controlled by the contributor, whether already acquired or hereafter acquired, that
+would be infringed by some manner, permitted by this License, of making, using, or
+selling its contributor version, but do not include claims that would be infringed
+only as a consequence of further modification of the contributor version. For
+purposes of this definition, &ldquo;control&rdquo; includes the right to grant patent
+sublicenses in a manner consistent with the requirements of this License.
+
+Each contributor grants you a non-exclusive, worldwide, royalty-free patent license
+under the contributor's essential patent claims, to make, use, sell, offer for sale,
+import and otherwise run, modify and propagate the contents of its contributor
+version.
+
+In the following three paragraphs, a &ldquo;patent license&rdquo; is any express
+agreement or commitment, however denominated, not to enforce a patent (such as an
+express permission to practice a patent or covenant not to sue for patent
+infringement). To &ldquo;grant&rdquo; such a patent license to a party means to make
+such an agreement or commitment not to enforce a patent against the party.
+
+If you convey a covered work, knowingly relying on a patent license, and the
+Corresponding Source of the work is not available for anyone to copy, free of charge
+and under the terms of this License, through a publicly available network server or
+other readily accessible means, then you must either (1) cause the Corresponding
+Source to be so available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner consistent with
+the requirements of this License, to extend the patent license to downstream
+recipients. &ldquo;Knowingly relying&rdquo; means you have actual knowledge that, but
+for the patent license, your conveying the covered work in a country, or your
+recipient's use of the covered work in a country, would infringe one or more
+identifiable patents in that country that you have reason to believe are valid.
+
+If, pursuant to or in connection with a single transaction or arrangement, you
+convey, or propagate by procuring conveyance of, a covered work, and grant a patent
+license to some of the parties receiving the covered work authorizing them to use,
+propagate, modify or convey a specific copy of the covered work, then the patent
+license you grant is automatically extended to all recipients of the covered work and
+works based on it.
+
+A patent license is &ldquo;discriminatory&rdquo; if it does not include within the
+scope of its coverage, prohibits the exercise of, or is conditioned on the
+non-exercise of one or more of the rights that are specifically granted under this
+License. You may not convey a covered work if you are a party to an arrangement with
+a third party that is in the business of distributing software, under which you make
+payment to the third party based on the extent of your activity of conveying the
+work, and under which the third party grants, to any of the parties who would receive
+the covered work from you, a discriminatory patent license (a) in connection with
+copies of the covered work conveyed by you (or copies made from those copies), or (b)
+primarily for and in connection with specific products or compilations that contain
+the covered work, unless you entered into that arrangement, or that patent license
+was granted, prior to 28 March 2007.
+
+Nothing in this License shall be construed as excluding or limiting any implied
+license or other defenses to infringement that may otherwise be available to you
+under applicable patent law.
+
+### 12. No Surrender of Others' Freedom.
+
+If conditions are imposed on you (whether by court order, agreement or otherwise)
+that contradict the conditions of this License, they do not excuse you from the
+conditions of this License. If you cannot convey a covered work so as to satisfy
+simultaneously your obligations under this License and any other pertinent
+obligations, then as a consequence you may not convey it at all. For example, if you
+agree to terms that obligate you to collect a royalty for further conveying from
+those to whom you convey the Program, the only way you could satisfy both those terms
+and this License would be to refrain entirely from conveying the Program.
+
+### 13. Use with the GNU Affero General Public License.
+
+Notwithstanding any other provision of this License, you have permission to link or
+combine any covered work with a work licensed under version 3 of the GNU Affero
+General Public License into a single combined work, and to convey the resulting work.
+The terms of this License will continue to apply to the part which is the covered
+work, but the special requirements of the GNU Affero General Public License, section
+13, concerning interaction through a network will apply to the combination as such.
+
+### 14. Revised Versions of this License.
+
+The Free Software Foundation may publish revised and/or new versions of the GNU
+General Public License from time to time. Such new versions will be similar in spirit
+to the present version, but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program specifies that
+a certain numbered version of the GNU General Public License &ldquo;or any later
+version&rdquo; applies to it, you have the option of following the terms and
+conditions either of that numbered version or of any later version published by the
+Free Software Foundation. If the Program does not specify a version number of the GNU
+General Public License, you may choose any version ever published by the Free
+Software Foundation.
+
+If the Program specifies that a proxy can decide which future versions of the GNU
+General Public License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the Program.
+
+Later license versions may give you additional or different permissions. However, no
+additional obligations are imposed on any author or copyright holder as a result of
+your choosing to follow a later version.
+
+### 15. Disclaimer of Warranty.
+
+THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM &ldquo;AS IS&rdquo; WITHOUT WARRANTY OF ANY KIND, EITHER
+EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE
+QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE
+DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+### 16. Limitation of Liability.
+
+IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
+COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS
+PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
+INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE
+OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
+WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+### 17. Interpretation of Sections 15 and 16.
+
+If the disclaimer of warranty and limitation of liability provided above cannot be
+given local legal effect according to their terms, reviewing courts shall apply local
+law that most closely approximates an absolute waiver of all civil liability in
+connection with the Program, unless a warranty or assumption of liability accompanies
+a copy of the Program in return for a fee.
+
+END OF TERMS AND CONDITIONS
+
+## How to Apply These Terms to Your New Programs
+
+If you develop a new program, and you want it to be of the greatest possible use to
+the public, the best way to achieve this is to make it free software which everyone
+can redistribute and change under these terms.
+
+To do so, attach the following notices to the program. It is safest to attach them
+to the start of each source file to most effectively state the exclusion of warranty;
+and each file should have at least the &ldquo;copyright&rdquo; line and a pointer to
+where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program does terminal interaction, make it output a short notice like this
+when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type 'show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type 'show c' for details.
+
+The hypothetical commands 'show w' and 'show c' should show the appropriate parts of
+the General Public License. Of course, your program's commands might be different;
+for a GUI interface, you would use an &ldquo;about box&rdquo;.
+
+You should also get your employer (if you work as a programmer) or school, if any, to
+sign a &ldquo;copyright disclaimer&rdquo; for the program, if necessary. For more
+information on this, and how to apply and follow the GNU GPL, see
+&lt;<http://www.gnu.org/licenses/>&gt;.
+
+The GNU General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may consider it
+more useful to permit linking proprietary applications with the library. If this is
+what you want to do, use the GNU Lesser General Public License instead of this
+License. But first, please read
+&lt;<http://www.gnu.org/philosophy/why-not-lgpl.html>&gt;.

Documentation/Logo/Marlin Logo.ai

@@ -0,0 +1,353 @@
+%!PS-Adobe-3.0
+%%Creator:Adobe Illustrator (TM) 8.000000 Exported from CorelDRAW X6
+%%Title:marlin logoscript.ai
+%%CreationDate:
+%%Canvassize:16383
+%%BoundingBox:-62 3484 337 3617
+%%DocumentProcessColors: Cyan Magenta Yellow Black
+%%DocumentSuppliedResources: procset Adobe_level2_AI5 1.2 0
+%%+ procset Adobe_typography_AI5 1.0 1
+%%+ procset Adobe_ColorImage_AI6 1.1 0
+%%+ procset Adobe_Illustrator_AI5 1.2 0
+%%+ procset Adobe_cshow 2.0 8
+%%+ procset Adobe_shading_AI8 1.0 0
+%%DocumentSuppliedResources: procset Adobe_level2_AI5 1.2 0
+%%+ procset Adobe_typography_AI5 1.0 1
+%%+ procset Adobe_ColorImage_AI6 1.1 0
+%%+ procset Adobe_Illustrator_AI5 1.2 0
+%%+ procset Adobe_cshow 2.0 8
+%%DocumentNeededResources: procset Adobe_level2_AI5 1.2 0
+%%+ procset Adobe_typography_AI5 1.0 0
+%%+ procset Adobe_ColorImage_AI6 1.1 0
+%%+ procset Adobe_Illustrator_AI5 1.0 0
+%%DocumentNeededResources: procset Adobe_level2_AI5 1.2 0
+%%+ procset Adobe_Illustrator_AI5 1.0 0
+%%+ procset Adobe_packedarray 2.0 0
+%%+ procset Adobe_cmykcolor 1.1 0
+%%+ procset Adobe_cshow 1.1 0
+%%+ procset Adobe_customcolor 1.0 0
+%%+ procset Adobe_typography_AI3 1.0 1
+%%+ procset Adobe_pattern_AI3 1.0 1
+%%+ procset Adobe_IllustratorA_AI3 1.0 1
+%%DocumentNeededResources: procset Adobe_packedarray 2.0 0
+%%+ procset Adobe_cmykcolor 1.1 0
+%%+ procset Adobe_cshow 1.1 0
+%%+ procset Adobe_customcolor 1.0 0
+%%+ procset Adobe_typography_AI3 1.0 1
+%%+ procset Adobe_pattern_AI3 1.0 1
+%%+ procset Adobe_IllustratorA_AI3 1.0 1
+%AI3_ColorUsage: Color
+%AI3_Cropmarks:0 0 842 595
+%AI3_TileBox:0 0 842 595
+%AI3_TemplateBox:421 297 421 297
+%AI3_DocumentPreview: None
+%AI5_ArtSize: 842 595 
+%AI5_NumLayers: 1
+%AI5_FileFormat 2.0
+%AI9_ColorModel: 2
+%AI12_CMSettings: 00.MS
+%AI7_Thumbnail: 128 44 8
+%%BeginData: 4580 Hex Bytes
+%2B2A29FEFEFE000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000000000000000000000000000
+%000000000000000000000000000000000000
+%524C45FD0601FD7A00FD0401FD7C00FD0301FD7D000101FD0500FD6301FD
+%160001FD0400FD6601FD150001FD0300FD6801FD1800FD6901FD1600FD6B
+%01FD1500FD5001FD0600FD1601FD1400FD0C01FD0500FD0901FD0600FD30
+%01FD0600FD0501FD0300FD0F01FD1300FD0A01FD0A00FD0401FD0A00FD2E
+%01FD0600FD0401FD0500FD0F01FD1200FD0901FD0C000101FD0C00FD2D01
+%FD0600FD0401FD0500FD1001FD1100FD0801FD1C00FD2C01FD0600FD0401
+%FD0500FD1101FD1000FD0701FD1E00FD2B01FD0600FD0401FD0500FD1201
+%FD0F00FD0601FD1F00FD2B01FD0600FD0401FD0500FD1301FD0E00FD0601
+%FD0700FD0401FD0900FD0501FD0700FD2A01FD0600FD1D01FD0D00FD0601
+%FD0600FD0601FD0700FD0701FD0600FD0701FD0700FD0F01FD0700FD0601
+%FD0600FD0401FD0500FD0901FD0700FD0501FD0C00FD0501FD0600FD0801
+%FD0600FD0701FD0600FD0601FD0A00FD0C01FD0A00FD0401FD0600FD0401
+%FD0500FD0801FD0A00FD0401FD0B00FD0501FD0600FD0801FD0600FD0701
+%FD0600FD0401FD0D00FD0901FD0D00FD0301FD0600FD0401FD0500FD0601
+%FD0D00FD0401FD0A00FD0501FD0600FD0801FD0600FD0701FD0600FD0301
+%FD0F00FD0801FD0E000101FD0600FD0401FD0500FD0601FD0E00FD0401FD
+%0900FD0501FD0600FD0801FD0600FD0701FD06000101FD1100FD0601FD10
+%0001FD0600FD0401FD0500FD0501FD1000FD0401FD0800FD0501FD0600FD
+%0801FD0600FD0701FD06000101FD1100FD0501FD110001FD0600FD0401FD
+%0500FD0401FD1100FD0501FD0700FD0501FD0600FD0801FD0600FD0701FD
+%060001FD0700FD0501FD0700FD0401FD0700FD0401FD060001FD0600FD04
+%01FD0500FD0401FD0700FD0401FD0600FD0601FD0600FD0501FD0600FD08
+%01FD0600FD0701FD060001FD0600FD0701FD0600FD0401FD0600FD0601FD
+%050001FD0600FD0401FD0500FD0401FD0600FD0601FD0600FD0501FD0600
+%FD0501FD0600FD0801FD0600FD0701FD060001FD0600FD0801FD0500FD04
+%01FD0600FD0601FD0C00FD0401FD0500FD0401FD0600FD0601FD0600FD05
+%01FD0600FD0501FD0600FD0801FD0600FD0701FD060001FD0500FD0901FD
+%0600FD0301FD0600FD0601FD0C00FD0401FD0500FD0401FD0600FD0601FD
+%0600FD0501FD0600FD0501FD0600FD0801FD0600FD0701FD0C00FD0901FD
+%0600FD0301FD0600FD0C01FD0600FD0401FD0500FD0401FD0600FD0601FD
+%0600FD0501FD0600FD0501FD0600FD0801FD0600FD0701FD060001FD0500
+%FD0901FD0600FD0301FD0600FD0C01FD0600FD0401FD0500FD0401FD0600
+%FD0601FD0600FD0501FD0600FD0501FD0600FD0801FD0600FD0701FD0600
+%01FD0600FD0801FD0600FD0301FD0600FD0C01FD0600FD0401FD0500FD04
+%01FD0600FD0601FD0600FD0501FD0600FD0501FD0600FD0801FD0600FD07
+%01FD060001FD0600FD0801FD0600FD0301FD0600FD0C01FD0600FD0401FD
+%0500FD0401FD0600FD0601FD0600FD0501FD0600FD0501FD0600FD0801FD
+%0600FD0701FD060001FD0800FD0601FD0600FD0301FD0600FD0C01FD0600
+%FD0401FD0500FD0401FD0600FD0601FD0600FD0501FD0600FD0501FD0600
+%FD0801FD0600FD0701FD06000101FD0C0001FD0F00FD0C01FD090001FD0F
+%00FD0601FD0600FD0501FD0600FD0501FD0600FD0801FD0600FD0701FD06
+%000101FD0C0001FD0F00FD0D01FD080001FD0F00FD0601FD0600FD0501FD
+%0600FD0501FD0600FD0801FD0600FD0701FD0600FD0301FD0B0001FD0F00
+%FD0D01FD080001FD0F00FD0601FD0600FD0501FD0600FD0501FD0600FD08
+%01FD0600FD0701FD0600FD0401FD0A0001FD0F00FD0E01FD070001FD0F00
+%FD0601FD0600FD0501FD0600FD0501FD0600FD0801FD0600FD0701FD0600
+%FD0601FD080001FD0F00FD0F01FD060001FD0F00FD0601FD0600FD0501FD
+%0600FD0601FD0500FD0801FD0600FD0701FD0600FD0801FD060001FD0F00
+%FD1101FD040001FD0F00FD0601FD0500FD0601FD0700FD7801FD040001FD
+%0300FD7801FD03000101FD0400FD7601FD0400FD0301FD0500FD7201FD05
+%00FD0501FD7A00FD0701FD7800FD0A01FD7400FD0601
+%%EndData
+%%EndComments
+%%BeginProlog
+%%IncludeResource: procset Adobe_level2_AI5 1.2 0
+%%IncludeResource: procset Adobe_typography_AI5 1.0 1
+%%IncludeResource: procset Adobe_ColorImage_AI6 1.1 0
+%%IncludeResource: procset Adobe_Illustrator_AI5 1.2 0
+%%IncludeResource: procset Adobe_cshow 2.0 8
+%%IncludeResource: procset Adobe_level2_AI5 1.2 0
+%%IncludeResource: procset Adobe_typography_AI5 1.0 1
+%%IncludeResource: procset Adobe_ColorImage_AI6 1.1 0
+%%IncludeResource: procset Adobe_Illustrator_AI5 1.2 0
+%%IncludeResource: procset Adobe_cshow 2.0 8
+%%IncludeResource: procset Adobe_level2_AI5 1.2 0
+%%IncludeResource: procset Adobe_typography_AI5 1.0 0
+%%IncludeResource: procset Adobe_ColorImage_AI6 1.1 0
+%%IncludeResource: procset Adobe_Illustrator_AI5 1.0 0
+%%IncludeResource: procset Adobe_level2_AI5 1.2 0
+%%IncludeResource: procset Adobe_Illustrator_AI5 1.0 0
+%%IncludeResource: procset Adobe_packedarray 2.0 0
+Adobe_packedarray /initialize get exec
+%%IncludeResource: procset Adobe_cmykcolor 1.1 0
+%%IncludeResource: procset Adobe_cshow 1.1 0
+%%IncludeResource: procset Adobe_customcolor 1.0 0
+%%IncludeResource: procset Adobe_typography_AI3 1.0 1
+%%IncludeResource: procset Adobe_pattern_AI3 1.0 1
+%%IncludeResource: procset Adobe_IllustratorA_AI3 1.0 1
+%%IncludeResource: procset Adobe_packedarray 2.0 0
+Adobe_packedarray /initialize get exec
+%%IncludeResource: procset Adobe_cmykcolor 1.1 0
+%%IncludeResource: procset Adobe_cshow 1.1 0
+%%IncludeResource: procset Adobe_customcolor 1.0 0
+%%IncludeResource: procset Adobe_typography_AI3 1.0 1
+%%IncludeResource: procset Adobe_pattern_AI3 1.0 1
+%%IncludeResource: procset Adobe_IllustratorA_AI3 1.0 1
+%%EndProlog
+%%BeginSetup
+Adobe_level2_AI5 /initialize get exec
+Adobe_cshow /initialize get exec
+Adobe_Illustrator_AI5_vars Adobe_Illustrator_AI5 Adobe_typography_AI5 /initialize get exec
+Adobe_ColorImage_AI6 /initialize get exec
+Adobe_Illustrator_AI5 /initialize get exec
+Adobe_level2_AI5 /initialize get exec
+Adobe_cshow /initialize get exec
+Adobe_Illustrator_AI5_vars Adobe_Illustrator_AI5 Adobe_typography_AI5 /initialize get exec
+Adobe_ColorImage_AI6 /initialize get exec
+Adobe_Illustrator_AI5 /initialize get exec
+Adobe_level2_AI5 /initialize get exec
+Adobe_Illustrator_AI5_vars Adobe_Illustrator_AI5 Adobe_typography_AI5 /initialize get exec
+Adobe_ColorImage_AI6 /initialize get exec
+Adobe_Illustrator_AI5 /initialize get exec
+Adobe_cmykcolor /initialize get exec
+Adobe_cshow /initialize get exec
+Adobe_customcolor /initialize get exec
+Adobe_typography_AI3 /initialize get exec
+Adobe_pattern_AI3 /initialize get exec
+Adobe_IllustratorA_AI3 /initialize get exec
+Adobe_level2_AI5 /initialize get exec
+Adobe_Illustrator_AI5 /initialize get exec
+Adobe_cmykcolor /initialize get exec
+Adobe_cshow /initialize get exec
+Adobe_customcolor /initialize get exec
+Adobe_typography_AI3 /initialize get exec
+Adobe_pattern_AI3 /initialize get exec
+Adobe_IllustratorA_AI3 /initialize get exec
+%%EndSetup
+%AI5_BeginLayer
+ 1 1 1 1 0 0 -1 43 42 41 Lb
+(Layer 1) Ln
+*u
+1 XR
+0 O
+0.0000 0.0000 0.0000 1.0000 k
+256.4660 3540.8095 m
+256.4660 3520.4596 L
+242.7843 3520.4596 L
+242.7843 3565.7580 L
+227.6082 3565.7580 L
+227.6082 3520.4596 L
+227.6082 3506.5480 L
+242.7843 3506.5480 L
+256.4660 3506.5480 L
+271.6421 3506.5480 L
+271.6421 3520.4596 L
+271.6421 3541.1542 l
+271.6421 3547.8227 276.4709 3552.4216 283.1394 3552.4216 c
+293.1418 3552.4216 294.2915 3544.4886 294.2915 3541.1542 c
+294.2915 3506.5480 L
+298.3190 3506.5480 302.3467 3506.5480 306.3742 3506.5480 C
+307.8984 3506.5145 309.4679 3507.4029 309.4679 3510.6398 c
+309.4679 3540.8095 l
+309.4679 3556.3306 299.6952 3567.2528 283.1394 3567.2528 c
+267.0435 3567.2528 256.4660 3555.8705 256.4660 3540.8095 c
+256.4660 3540.8095 l
+f
+140.5471 3506.5480 m
+128.2450 3506.5480 L
+113.0689 3506.5480 L
+113.0689 3521.2643 L
+113.0689 3535.9807 l
+113.0689 3545.0634 106.2856 3552.5364 97.8928 3552.5364 c
+89.5000 3552.5364 82.7167 3545.2933 82.7167 3536.4404 c
+82.7167 3527.7026 89.5000 3521.2643 98.2378 3521.2643 c
+106.9756 3521.2643 L
+106.9756 3506.5480 L
+96.3981 3506.5480 l
+79.8423 3506.5480 67.4254 3519.8847 67.4254 3536.4404 c
+67.4254 3553.2264 79.9571 3567.2528 97.8928 3567.2528 c
+115.7134 3567.2528 128.2450 3553.2264 128.2450 3535.9807 c
+128.2450 3521.2643 L
+140.5471 3521.2643 L
+140.5471 3540.8095 l
+140.5471 3555.8705 151.1246 3567.2528 167.2206 3567.2528 c
+183.7763 3567.2528 193.5490 3556.3306 193.5490 3540.8095 c
+193.5490 3538.1650 L
+178.3726 3538.1650 L
+178.3726 3541.1542 l
+178.3726 3544.4886 177.2229 3552.4216 167.2206 3552.4216 c
+160.5521 3552.4216 155.7232 3547.8227 155.7232 3541.1542 c
+155.7232 3521.2643 L
+155.7232 3506.5480 L
+140.5471 3506.5480 L
+140.5471 3506.5480 L
+f
+64.0239 3559.5496 m
+64.0239 3575.5308 52.1819 3588.2926 35.0512 3588.2926 c
+26.3134 3588.2926 18.6103 3584.2686 13.7815 3577.9450 C
+8.8379 3584.2686 1.3646 3588.2926 -7.4880 3588.2926 c
+-24.5038 3588.2926 -36.3458 3575.5305 -36.3458 3559.5496 c
+-36.3458 3542.7838 -36.3458 3526.0183 -36.3458 3509.2525 C
+-36.3458 3507.8134 -35.2460 3506.5480 -33.5305 3506.5480 C
+-21.2848 3506.5480 L
+-21.2848 3559.7798 l
+-21.2848 3567.3678 -15.8811 3573.4612 -7.4880 3573.4612 c
+0.7897 3573.4612 6.1934 3567.3678 6.1934 3559.7798 c
+6.1934 3506.5480 L
+21.4846 3506.5480 L
+21.4846 3559.7798 l
+21.4846 3567.3678 26.6584 3573.4612 35.0512 3573.4612 c
+43.3293 3573.4612 48.8477 3567.3678 48.8477 3559.7798 c
+48.8477 3506.5480 L
+64.0239 3506.5480 L
+64.0239 3559.5496 l
+64.0239 3559.5496 l
+f
+197.0773 3531.3817 m
+197.0773 3515.1707 206.2749 3504.8234 223.6357 3506.6631 C
+223.6357 3520.4596 L
+216.1624 3519.9995 212.3685 3522.9889 212.3685 3531.3817 c
+212.3685 3592.0865 L
+197.0773 3592.0865 L
+197.0773 3531.3817 l
+197.0773 3531.3817 l
+f
+242.7843 3572.1967 m
+242.7843 3580.7043 l
+242.7843 3584.9582 239.3351 3588.2926 235.1962 3588.2926 c
+230.9423 3588.2926 227.4931 3584.9582 227.4931 3580.7043 c
+227.4931 3572.1967 L
+242.7843 3572.1967 L
+f
+*U
+1 XR
+0 R
+0.0000 0.0000 0.0000 1.0000 K
+0 1 0 0 0 Xy
+0 J
+0 j
+22.9256 M
+7.0866 w
+[]0 d
+-31.5927 3613.1664 m
+304.7145 3613.1664 l
+320.3050 3613.1664 333.0609 3600.4107 333.0609 3584.8202 c
+333.0609 3515.5123 l
+333.0609 3499.9217 320.3050 3487.1661 304.7145 3487.1661 c
+-31.5927 3487.1661 l
+-47.1832 3487.1661 -59.9391 3499.9217 -59.9391 3515.5123 c
+-59.9391 3584.8202 l
+-59.9391 3600.4107 -47.1832 3613.1664 -31.5927 3613.1664 c
+s
+1 XR
+0 O
+0.0000 0.0000 0.0000 1.0000 k
+336.5671 3616.7281 m
+260.4297 3616.7281 L
+336.5671 3539.4786 L
+336.5671 3616.7281 L
+f
+LB
+%AI5_EndLayer--
+%%PageTrailer
+gsave annotatepage grestore showpage
+%%Trailer
+Adobe_Illustrator_AI5 /terminate get exec
+Adobe_ColorImage_AI6 /terminate get exec
+Adobe_typography_AI5 /terminate get exec
+Adobe_cshow /terminate get exec
+Adobe_level2_AI5 /terminate get exec
+Adobe_Illustrator_AI5 /terminate get exec
+Adobe_ColorImage_AI6 /terminate get exec
+Adobe_typography_AI5 /terminate get exec
+Adobe_cshow /terminate get exec
+Adobe_level2_AI5 /terminate get exec
+Adobe_Illustrator_AI5 /terminate get exec
+Adobe_ColorImage_AI6 /terminate get exec
+Adobe_typography_AI5 /terminate get exec
+Adobe_level2_AI5 /terminate get exec
+Adobe_Illustrator_AI5 /terminate get exec
+Adobe_level2_AI5 /terminate get exec
+Adobe_IllustratorA_AI3 /terminate get exec
+Adobe_pattern_AI3 /terminate get exec
+Adobe_typography_AI3 /terminate get exec
+Adobe_customcolor /terminate get exec
+Adobe_cshow /terminate get exec
+Adobe_cmykcolor /terminate get exec
+Adobe_packedarray /terminate get exec
+Adobe_IllustratorA_AI3 /terminate get exec
+Adobe_pattern_AI3 /terminate get exec
+Adobe_typography_AI3 /terminate get exec
+Adobe_customcolor /terminate get exec
+Adobe_cshow /terminate get exec
+Adobe_cmykcolor /terminate get exec
+Adobe_packedarray /terminate get exec
+%%EOF
+

Documentation/Logo/Marlin Logo.svg

@@ -0,0 +1,24 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Generator: Adobe Illustrator 15.1.0, SVG Export Plug-In . SVG Version: 6.00 Build 0)  -->
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
+	 width="595.28px" height="841.89px" viewBox="0 0 595.28 841.89" enable-background="new 0 0 595.28 841.89" xml:space="preserve">
+<path d="M428.064,394.44v20.351h-13.682v-45.299h-15.177v45.299v13.911h15.177h13.682h15.176v-13.911v-20.694
+	c0-6.669,4.828-11.268,11.496-11.268c10.004,0,11.152,7.933,11.152,11.268v34.605c4.027,0,8.057,0,12.084,0
+	c1.523,0.034,3.094-0.854,3.094-4.092v-30.17c0-15.521-9.773-26.443-26.33-26.443C438.641,367.997,428.064,379.379,428.064,394.44
+	L428.064,394.44z M312.145,428.702h-12.301h-15.177v-14.716v-14.717c0-9.083-6.783-16.556-15.176-16.556
+	c-8.393,0-15.176,7.243-15.176,16.096c0,8.738,6.783,15.177,15.521,15.177h8.738v14.716h-10.578
+	c-16.556,0-28.973-13.337-28.973-29.893c0-16.786,12.532-30.812,30.467-30.812c17.821,0,30.353,14.026,30.353,31.272v14.717h12.301
+	V394.44c0-15.061,10.578-26.443,26.674-26.443c16.557,0,26.328,10.922,26.328,26.443v2.645h-15.176v-2.988
+	c0-3.335-1.15-11.268-11.152-11.268c-6.668,0-11.497,4.599-11.497,11.268v19.89v14.716H312.145L312.145,428.702z M235.622,375.7
+	c0-15.981-11.842-28.743-28.973-28.743c-8.738,0-16.441,4.023-21.27,10.348c-4.943-6.324-12.417-10.348-21.269-10.348
+	c-17.016,0-28.858,12.762-28.858,28.743c0,16.766,0,33.532,0,50.297c0,1.439,1.1,2.704,2.815,2.704h12.246V375.47
+	c0-7.588,5.403-13.682,13.797-13.682c8.277,0,13.681,6.094,13.681,13.682v53.231h15.292V375.47c0-7.588,5.173-13.682,13.566-13.682
+	c8.278,0,13.796,6.094,13.796,13.682v53.231h15.176V375.7L235.622,375.7z M368.676,403.868c0,16.212,9.197,26.559,26.559,24.719
+	v-13.796c-7.474,0.46-11.268-2.529-11.268-10.923v-60.704h-15.291V403.868L368.676,403.868z M414.383,363.053v-8.508
+	c0-4.254-3.449-7.588-7.588-7.588c-4.254,0-7.703,3.334-7.703,7.588v8.508H414.383L414.383,363.053z"/>
+<path fill="none" stroke="#000000" stroke-width="7.0866" stroke-miterlimit="22.9256" d="M140.005,322.083h336.307
+	c15.59,0,28.346,12.756,28.346,28.346v69.308c0,15.591-12.756,28.346-28.346,28.346H140.005c-15.59,0-28.346-12.755-28.346-28.346
+	V350.43C111.659,334.839,124.415,322.083,140.005,322.083L140.005,322.083z"/>
+<polygon fill-rule="evenodd" clip-rule="evenodd" points="508.164,318.522 432.027,318.522 508.164,395.771 508.164,318.522 "/>
+</svg>

LICENSE

@@ -0,0 +1,278 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc., <http://fsf.org/>
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                            NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.

Marlin/COPYING

@@ -1,188 +0,0 @@
-GNU GENERAL PUBLIC LICENSE
-
-Version 3, 29 June 2007
-
-Copyright <20> 2007 Free Software Foundation, Inc. <http://fsf.org/>
-
-Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
-Preamble
-
-The GNU General Public License is a free, copyleft license for software and other kinds of works.
-
-The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too.
-
-When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.
-
-To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.
-
-For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
-
-Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.
-
-For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions.
-
-Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users.
-
-Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
-
-The precise terms and conditions for copying, distribution and modification follow.
-TERMS AND CONDITIONS
-0. Definitions.
-
-<EFBFBD>This License<73> refers to version 3 of the GNU General Public License.
-
-<EFBFBD>Copyright<EFBFBD> also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
-
-<EFBFBD>The Program<61> refers to any copyrightable work licensed under this License. Each licensee is addressed as <20>you<6F>. <20>Licensees<65> and <20>recipients<74> may be individuals or organizations.
-
-To <20>modify<66> a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a <20>modified version<6F> of the earlier work or a work <20>based on<6F> the earlier work.
-
-A <20>covered work<72> means either the unmodified Program or a work based on the Program.
-
-To <20>propagate<74> a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
-
-To <20>convey<65> a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
-
-An interactive user interface displays <20>Appropriate Legal Notices<65> to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
-1. Source Code.
-
-The <20>source code<64> for a work means the preferred form of the work for making modifications to it. <20>Object code<64> means any non-source form of a work.
-
-A <20>Standard Interface<63> means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
-
-The <20>System Libraries<65> of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A <20>Major Component<6E>, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.
-
-The <20>Corresponding Source<63> for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work.
-
-The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.
-
-The Corresponding Source for a work in source code form is that same work.
-2. Basic Permissions.
-
-All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
-
-You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.
-
-Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
-3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
-
-When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures.
-4. Conveying Verbatim Copies.
-
-You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.
-
-You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
-5. Conveying Modified Source Versions.
-
-You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
-    b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to <20>keep intact all notices<65>.
-    c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
-    d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
-
-A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an <20>aggregate<74> if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.
-6. Conveying Non-Source Forms.
-
-You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
-    b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
-    c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.
-    d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
-    e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d.
-
-A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
-
-A <20>User Product<63> is either (1) a <20>consumer product<63>, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, <20>normally used<65> refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.
-
-<EFBFBD>Installation Information<6F> for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.
-
-If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM).
-
-The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
-
-Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
-7. Additional Terms.
-
-<EFBFBD>Additional permissions<6E> are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.
-
-When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
-
-Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
-    b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or
-    c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or
-    d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
-    e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
-    f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.
-
-All other non-permissive additional terms are considered <20>further restrictions<6E> within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.
-
-If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms.
-
-Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.
-8. Termination.
-
-You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
-
-However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
-
-Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
-
-Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.
-9. Acceptance Not Required for Having Copies.
-
-You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.
-10. Automatic Licensing of Downstream Recipients.
-
-Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.
-
-An <20>entity transaction<6F> is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
-
-You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
-11. Patents.
-
-A <20>contributor<6F> is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's <20>contributor version<6F>.
-
-A contributor's <20>essential patent claims<6D> are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, <20>control<6F> includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.
-
-Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
-
-In the following three paragraphs, a <20>patent license<73> is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To <20>grant<6E> such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.
-
-If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. <20>Knowingly relying<6E> means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid.
-
-If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
-
-A patent license is <20>discriminatory<72> if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
-
-Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.
-12. No Surrender of Others' Freedom.
-
-If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.
-13. Use with the GNU Affero General Public License.
-
-Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such.
-14. Revised Versions of this License.
-
-The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License <20>or any later version<6F> applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
-
-If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
-
-Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.
-15. Disclaimer of Warranty.
-
-THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM <20>AS IS<49> WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-16. Limitation of Liability.
-
-IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
-17. Interpretation of Sections 15 and 16.
-
-If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
-

Marlin/Configuration.h

@@ -24,6 +24,9 @@
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
+
+//#define STRING_VERSION "1.0.2"
+
 #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time
 #define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
 
@@ -148,6 +151,7 @@
 #ifdef PIDTEMP
   //#define PID_DEBUG // Sends debug data to the serial port.
   //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
+  //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
   #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                   // is more then PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
   #define PID_INTEGRAL_DRIVE_MAX PID_MAX  //limit for the integral term
@@ -392,6 +396,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 
   // these are the offsets to the probe relative to the extruder tip (Hotend - Probe)
+  // X and Y offsets must be integers
   #define X_PROBE_OFFSET_FROM_EXTRUDER -25
   #define Y_PROBE_OFFSET_FROM_EXTRUDER -29
   #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35
@@ -563,7 +568,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // The Elefu RA Board Control Panel
 // http://www.elefu.com/index.php?route=product/product&product_id=53
-// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
 //automatic expansion
@@ -656,11 +661,13 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Shift register panels
 // ---------------------
 // 2 wire Non-latching LCD SR from:
-// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
-//#define SR_LCD
-#ifdef SR_LCD
-   #define SR_LCD_2W_NL    // Non latching 2 wire shift register
-   //#define NEWPANEL
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection 
+
+//#define SAV_3DLCD
+#ifdef SAV_3DLCD
+   #define SR_LCD_2W_NL    // Non latching 2 wire shiftregister
+   #define NEWPANEL
+   #define ULTIPANEL
 #endif
 
 

Marlin/ConfigurationStore.cpp

@@ -38,15 +38,7 @@ void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
 // wrong data being written to the variables.
 // ALSO:  always make sure the variables in the Store and retrieve sections are in the same order.
 
-#define EEPROM_VERSION "V10"
-#ifdef DELTA
-	#undef EEPROM_VERSION
-	#define EEPROM_VERSION "V11"
-#endif
-#ifdef SCARA
-	#undef EEPROM_VERSION
-	#define EEPROM_VERSION "V12"
-#endif
+#define EEPROM_VERSION "V13"
 
 #ifdef EEPROM_SETTINGS
 void Config_StoreSettings() 
@@ -101,6 +93,31 @@ void Config_StoreSettings()
   #ifdef SCARA
   EEPROM_WRITE_VAR(i,axis_scaling);        // Add scaling for SCARA
   #endif
+  #ifdef FWRETRACT
+  EEPROM_WRITE_VAR(i,autoretract_enabled);
+  EEPROM_WRITE_VAR(i,retract_length);
+  #if EXTRUDERS > 1
+  EEPROM_WRITE_VAR(i,retract_length_swap);
+  #endif
+  EEPROM_WRITE_VAR(i,retract_feedrate);
+  EEPROM_WRITE_VAR(i,retract_zlift);
+  EEPROM_WRITE_VAR(i,retract_recover_length);
+  #if EXTRUDERS > 1
+  EEPROM_WRITE_VAR(i,retract_recover_length_swap);
+  #endif
+  EEPROM_WRITE_VAR(i,retract_recover_feedrate);
+  #endif
+
+  // Save filament sizes
+  EEPROM_WRITE_VAR(i, volumetric_enabled);
+  EEPROM_WRITE_VAR(i, filament_size[0]);
+  #if EXTRUDERS > 1
+  EEPROM_WRITE_VAR(i, filament_size[1]);
+  #if EXTRUDERS > 2
+  EEPROM_WRITE_VAR(i, filament_size[2]);
+  #endif
+  #endif
+  
   char ver2[4]=EEPROM_VERSION;
   i=EEPROM_OFFSET;
   EEPROM_WRITE_VAR(i,ver2); // validate data
@@ -210,11 +227,45 @@ SERIAL_ECHOLNPGM("Scaling factors:");
     SERIAL_ECHO_START;
     SERIAL_ECHOLNPGM("Recover: S=Extra length (mm) F:Speed (mm/m)");
     SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("   M208 S",retract_recover_length); 
-    SERIAL_ECHOPAIR(" F" ,retract_recover_feedrate*60); 
-    SERIAL_ECHOLN(""); 
+    SERIAL_ECHOPAIR("   M208 S",retract_recover_length);
+    SERIAL_ECHOPAIR(" F", retract_recover_feedrate*60);
+	SERIAL_ECHOLN("");
+    SERIAL_ECHO_START;
+    SERIAL_ECHOLNPGM("Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries");
+    SERIAL_ECHO_START;
+    SERIAL_ECHOPAIR("   M209 S", (unsigned long)(autoretract_enabled ? 1 : 0));
+    SERIAL_ECHOLN("");
+#if EXTRUDERS > 1
+    SERIAL_ECHO_START;
+    SERIAL_ECHOLNPGM("Multi-extruder settings:");
+    SERIAL_ECHO_START;
+    SERIAL_ECHOPAIR("   Swap retract length (mm):    ", retract_length_swap);
+    SERIAL_ECHOLN("");
+    SERIAL_ECHO_START;
+    SERIAL_ECHOPAIR("   Swap rec. addl. length (mm): ", retract_recover_length_swap);
+    SERIAL_ECHOLN("");
 #endif
-} 
+    SERIAL_ECHO_START;
+    if (volumetric_enabled) {
+        SERIAL_ECHOLNPGM("Filament settings:");
+        SERIAL_ECHO_START;
+        SERIAL_ECHOPAIR("   M200 D", filament_size[0]);
+        SERIAL_ECHOLN(""); 
+#if EXTRUDERS > 1
+		SERIAL_ECHO_START;
+        SERIAL_ECHOPAIR("   M200 T1 D", filament_size[1]);
+        SERIAL_ECHOLN(""); 
+#if EXTRUDERS > 2
+		SERIAL_ECHO_START;
+        SERIAL_ECHOPAIR("   M200 T2 D", filament_size[2]);
+		SERIAL_ECHOLN("");
+#endif
+#endif
+    } else {
+        SERIAL_ECHOLNPGM("Filament settings: Disabled");
+    }
+#endif
+}
 #endif
 
 
@@ -277,6 +328,30 @@ void Config_RetrieveSettings()
 		EEPROM_READ_VAR(i,axis_scaling);
 		#endif
 
+		#ifdef FWRETRACT
+		EEPROM_READ_VAR(i,autoretract_enabled);
+		EEPROM_READ_VAR(i,retract_length);
+		#if EXTRUDERS > 1
+		EEPROM_READ_VAR(i,retract_length_swap);
+		#endif
+		EEPROM_READ_VAR(i,retract_feedrate);
+		EEPROM_READ_VAR(i,retract_zlift);
+		EEPROM_READ_VAR(i,retract_recover_length);
+		#if EXTRUDERS > 1
+		EEPROM_READ_VAR(i,retract_recover_length_swap);
+		#endif
+		EEPROM_READ_VAR(i,retract_recover_feedrate);
+		#endif
+
+		EEPROM_READ_VAR(i, volumetric_enabled);
+		EEPROM_READ_VAR(i, filament_size[0]);
+#if EXTRUDERS > 1
+		EEPROM_READ_VAR(i, filament_size[1]);
+#if EXTRUDERS > 2
+		EEPROM_READ_VAR(i, filament_size[2]);
+#endif
+#endif
+		calculate_volumetric_multipliers();
 		// Call updatePID (similar to when we have processed M301)
 		updatePID();
         SERIAL_ECHO_START;
@@ -353,6 +428,31 @@ void Config_ResetDefault()
 #endif//PID_ADD_EXTRUSION_RATE
 #endif//PIDTEMP
 
+#ifdef FWRETRACT
+	autoretract_enabled = false;
+	retract_length = RETRACT_LENGTH;
+#if EXTRUDERS > 1
+	retract_length_swap = RETRACT_LENGTH_SWAP;
+#endif
+	retract_feedrate = RETRACT_FEEDRATE;
+	retract_zlift = RETRACT_ZLIFT;
+	retract_recover_length = RETRACT_RECOVER_LENGTH;
+#if EXTRUDERS > 1
+	retract_recover_length_swap = RETRACT_RECOVER_LENGTH_SWAP;
+#endif
+	retract_recover_feedrate = RETRACT_RECOVER_FEEDRATE;
+#endif
+
+	volumetric_enabled = false;
+	filament_size[0] = DEFAULT_NOMINAL_FILAMENT_DIA;
+#if EXTRUDERS > 1
+	filament_size[1] = DEFAULT_NOMINAL_FILAMENT_DIA;
+#if EXTRUDERS > 2
+	filament_size[2] = DEFAULT_NOMINAL_FILAMENT_DIA;
+#endif
+#endif
+	calculate_volumetric_multipliers();
+
 SERIAL_ECHO_START;
 SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
 

Marlin/DOGMbitmaps.h

@@ -1,71 +1,67 @@
-#define START_BMPWIDTH 	60	//Width in pixels
+#define START_BMPWIDTH 	60	//Width in pixels - http://www.digole.com/tools/PicturetoC_Hex_converter.php
 #define START_BMPHEIGHT 	64	//Height in pixels
 #define START_BMPBYTEWIDTH 	8	//Width in bytes
 const unsigned char start_bmp[574] PROGMEM = { //AVR-GCC, WinAVR
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xF0,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xC0,0x3F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x80,0x1F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x00,0x0F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFE,0x00,0x07,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xF8,0x00,0x01,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xF0,0x00,0x00,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
-0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0x80,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
-0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFF,0x80,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
-0xFF,0xFF,0xF0,0x00,0x01,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x00,0x1F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0x83,0xFF,0xFF,0xFE,0x0F,0xFF,0xFF,0xF0,
-0x80,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xF0,
-0x88,0x7F,0xFF,0xFE,0x23,0xFF,0xFF,0xF0,
-0x8C,0x70,0x38,0x0E,0x71,0x81,0xC0,0x70,
-0x8C,0x60,0x38,0x0E,0x63,0x80,0xC0,0x30,
-0x80,0xE3,0x19,0xC6,0x07,0xF8,0xC7,0x30,
-0x80,0xE0,0x19,0xC6,0x03,0x80,0xC7,0x10,
-0x8C,0x62,0x79,0xC6,0x63,0x9C,0xC7,0x30,
-0x8C,0x63,0xF8,0xC6,0x71,0x18,0xC6,0x30,
-0x8E,0x30,0x18,0x0E,0x71,0x80,0xC0,0x30,
-0x9E,0x38,0x39,0x1E,0x79,0xC4,0xC4,0xF0,
-0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
-0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x0f,0xff,0xff,0xff,0xff,0xff,0xff,0xef,
+0x30,0x00,0x00,0x00,0x00,0x00,0x7f,0xff,
+0x60,0x00,0x00,0x00,0x00,0x00,0x1f,0xff,
+0x40,0x00,0x00,0x00,0x00,0x00,0x0f,0xff,
+0x40,0x00,0x00,0x00,0x01,0x80,0x0f,0xff,
+0x83,0xef,0xc0,0x00,0x01,0x8c,0x07,0xff,
+0x87,0xff,0xe0,0x00,0x01,0x8c,0x03,0xff,
+0x86,0x38,0x60,0x00,0x01,0x80,0x01,0xff,
+0x86,0x18,0x63,0xe0,0xf9,0x8c,0x7c,0xff,
+0x86,0x18,0x67,0xf1,0xfd,0x8c,0xfe,0x7f,
+0x86,0x18,0x6e,0x31,0x8d,0x8c,0xc6,0x3f,
+0x86,0x18,0x6c,0x39,0x8d,0x8c,0xc7,0x1f,
+0x86,0x18,0x6c,0x19,0x81,0x8c,0xc7,0x1f,
+0x86,0x18,0x6c,0x19,0x81,0x8c,0xc7,0x1f,
+0x86,0x18,0x6f,0x9f,0x81,0xcd,0xc7,0x1f,
+0x06,0x18,0x67,0xdf,0x80,0xef,0xc7,0x1f,
+0x44,0x18,0x61,0x9f,0x00,0x2f,0xc2,0x2f,
+0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x2f,
+0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x4f,
+0x1f,0xff,0xff,0xff,0xff,0xff,0xff,0x8f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f,
+0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0f
 };
 
 // Here comes a compile-time operation to match the extruder symbols 

Marlin/Marlin.h

@@ -30,7 +30,10 @@
 # include "Arduino.h"
 #else
 # include "WProgram.h"
-  //Arduino < 1.0.0 does not define this, so we need to do it ourselves
+#endif
+
+// Arduino < 1.0.0 does not define this, so we need to do it ourselves
+#ifndef analogInputToDigitalPin
 # define analogInputToDigitalPin(p) ((p) + A0)
 #endif
 
@@ -103,7 +106,7 @@ FORCE_INLINE void serialprintPGM(const char *str)
 void get_command();
 void process_commands();
 
-void manage_inactivity();
+void manage_inactivity(bool ignore_stepper_queue=false);
 
 #if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \
     && defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
@@ -168,7 +171,7 @@ void manage_inactivity();
 #endif
 
 
-enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3};
+enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3, X_HEAD=4, Y_HEAD=5};
 
 
 void FlushSerialRequestResend();
@@ -209,7 +212,9 @@ extern float homing_feedrate[];
 extern bool axis_relative_modes[];
 extern int feedmultiply;
 extern int extrudemultiply; // Sets extrude multiply factor (in percent) for all extruders
+extern bool volumetric_enabled;
 extern int extruder_multiply[EXTRUDERS]; // sets extrude multiply factor (in percent) for each extruder individually
+extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
 extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
 extern float current_position[NUM_AXIS] ;
 extern float add_homing[3];
@@ -238,9 +243,9 @@ extern unsigned char fanSpeedSoftPwm;
 #endif
 
 #ifdef FILAMENT_SENSOR
-  extern float filament_width_nominal;  //holds the theoretical filament diameter ie., 3.00 or 1.75 
-  extern bool filament_sensor;  //indicates that filament sensor readings should control extrusion  
-  extern float filament_width_meas; //holds the filament diameter as accurately measured 
+  extern float filament_width_nominal;  //holds the theoretical filament diameter ie., 3.00 or 1.75
+  extern bool filament_sensor;  //indicates that filament sensor readings should control extrusion
+  extern float filament_width_meas; //holds the filament diameter as accurately measured
   extern signed char measurement_delay[];  //ring buffer to delay measurement
   extern int delay_index1, delay_index2;  //index into ring buffer
   extern float delay_dist; //delay distance counter
@@ -266,3 +271,6 @@ extern void digipot_i2c_init();
 #endif
 
 #endif
+
+extern void calculate_volumetric_multipliers();
+

Marlin/Marlin_main.cpp

@@ -61,7 +61,7 @@
 #include <SPI.h>
 #endif
 
-#define VERSION_STRING  "1.0.0"
+#define VERSION_STRING  "1.0.2"
 
 // look here for descriptions of G-codes: http://linuxcnc.org/handbook/gcode/g-code.html
 // http://objects.reprap.org/wiki/Mendel_User_Manual:_RepRapGCodes
@@ -215,6 +215,15 @@ int extruder_multiply[EXTRUDERS] = {100
     #endif
   #endif
 };
+bool volumetric_enabled = false;
+float filament_size[EXTRUDERS] = { DEFAULT_NOMINAL_FILAMENT_DIA
+  #if EXTRUDERS > 1
+      , DEFAULT_NOMINAL_FILAMENT_DIA
+    #if EXTRUDERS > 2
+       , DEFAULT_NOMINAL_FILAMENT_DIA
+    #endif
+  #endif
+};
 float volumetric_multiplier[EXTRUDERS] = {1.0
   #if EXTRUDERS > 1
     , 1.0
@@ -463,11 +472,21 @@ void enquecommand_P(const char *cmd)
 void setup_killpin()
 {
   #if defined(KILL_PIN) && KILL_PIN > -1
-    pinMode(KILL_PIN,INPUT);
+    SET_INPUT(KILL_PIN);
     WRITE(KILL_PIN,HIGH);
   #endif
 }
 
+// Set home pin
+void setup_homepin(void)
+{
+#if defined(HOME_PIN) && HOME_PIN > -1
+   SET_INPUT(HOME_PIN);
+   WRITE(HOME_PIN,HIGH);
+#endif
+}
+
+
 void setup_photpin()
 {
   #if defined(PHOTOGRAPH_PIN) && PHOTOGRAPH_PIN > -1
@@ -600,6 +619,7 @@ void setup()
   pinMode(SERVO0_PIN, OUTPUT);
   digitalWrite(SERVO0_PIN, LOW); // turn it off
 #endif // Z_PROBE_SLED
+  setup_homepin();
 }
 
 
@@ -2812,21 +2832,7 @@ Sigma_Exit:
     #endif //BLINKM
     case 200: // M200 D<millimeters> set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
       {
-        float area = .0;
-        float radius = .0;
-        if(code_seen('D')) {
-          radius = (float)code_value() * .5;
-          if(radius == 0) {
-            area = 1;
-          } else {
-            area = M_PI * pow(radius, 2);
-          }
-        } else {
-          //reserved for setting filament diameter via UFID or filament measuring device
-          break;
-        
-          
-        }
+
         tmp_extruder = active_extruder;
         if(code_seen('T')) {
           tmp_extruder = code_value();
@@ -2836,7 +2842,32 @@ Sigma_Exit:
             break;
           }
         }
-        volumetric_multiplier[tmp_extruder] = 1 / area;
+
+        float area = .0;
+        if(code_seen('D')) {
+		  float diameter = (float)code_value();
+		  if (diameter == 0.0) {
+			// setting any extruder filament size disables volumetric on the assumption that
+			// slicers either generate in extruder values as cubic mm or as as filament feeds
+			// for all extruders
+		    volumetric_enabled = false;
+		  } else {
+            filament_size[tmp_extruder] = (float)code_value();
+			// make sure all extruders have some sane value for the filament size
+			filament_size[0] = (filament_size[0] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[0]);
+            #if EXTRUDERS > 1
+			filament_size[1] = (filament_size[1] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[1]);
+            #if EXTRUDERS > 2
+			filament_size[2] = (filament_size[2] == 0.0 ? DEFAULT_NOMINAL_FILAMENT_DIA : filament_size[2]);
+            #endif
+            #endif
+			volumetric_enabled = true;
+		  }
+        } else {
+          //reserved for setting filament diameter via UFID or filament measuring device
+          break;
+        }
+		calculate_volumetric_multipliers();
       }
       break;
     case 201: // M201
@@ -3605,7 +3636,7 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
         while(!lcd_clicked()){
           cnt++;
           manage_heater();
-          manage_inactivity();
+          manage_inactivity(true);
           lcd_update();
           if(cnt==0)
           {
@@ -4301,8 +4332,20 @@ void handle_status_leds(void) {
 }
 #endif
 
-void manage_inactivity()
+void manage_inactivity(bool ignore_stepper_queue/*=false*/) //default argument set in Marlin.h
 {
+	
+#if defined(KILL_PIN) && KILL_PIN > -1
+	static int killCount = 0;   // make the inactivity button a bit less responsive
+   const int KILL_DELAY = 10000;
+#endif
+
+#if defined(HOME_PIN) && HOME_PIN > -1
+   static int homeDebounceCount = 0;   // poor man's debouncing count
+   const int HOME_DEBOUNCE_DELAY = 10000;
+#endif
+   
+	
   if(buflen < (BUFSIZE-1))
     get_command();
 
@@ -4312,7 +4355,7 @@ void manage_inactivity()
   if(stepper_inactive_time)  {
     if( (millis() - previous_millis_cmd) >  stepper_inactive_time )
     {
-      if(blocks_queued() == false) {
+      if(blocks_queued() == false && ignore_stepper_queue == false) {
         disable_x();
         disable_y();
         disable_z();
@@ -4332,9 +4375,49 @@ void manage_inactivity()
   #endif
   
   #if defined(KILL_PIN) && KILL_PIN > -1
+    
+    // Check if the kill button was pressed and wait just in case it was an accidental
+    // key kill key press
+    // -------------------------------------------------------------------------------
     if( 0 == READ(KILL_PIN) )
-      kill();
+    {
+       killCount++;
+    }
+    else if (killCount > 0)
+    {
+       killCount--;
+    }
+    // Exceeded threshold and we can confirm that it was not accidental
+    // KILL the machine
+    // ----------------------------------------------------------------
+    if ( killCount >= KILL_DELAY)
+    {
+       kill();
+    }
   #endif
+
+#if defined(HOME_PIN) && HOME_PIN > -1
+    // Check to see if we have to home, use poor man's debouncer
+    // ---------------------------------------------------------
+    if ( 0 == READ(HOME_PIN) )
+    {
+       if (homeDebounceCount == 0)
+       {
+          enquecommand_P((PSTR("G28")));
+          homeDebounceCount++;
+          LCD_ALERTMESSAGEPGM(MSG_AUTO_HOME);
+       }
+       else if (homeDebounceCount < HOME_DEBOUNCE_DELAY)
+       {
+          homeDebounceCount++;
+       }
+       else
+       {
+          homeDebounceCount = 0;
+       }
+    }
+#endif
+    
   #if defined(CONTROLLERFAN_PIN) && CONTROLLERFAN_PIN > -1
     controllerFan(); //Check if fan should be turned on to cool stepper drivers down
   #endif
@@ -4391,6 +4474,14 @@ void kill()
   SERIAL_ERROR_START;
   SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
   LCD_ALERTMESSAGEPGM(MSG_KILLED);
+  
+  // FMC small patch to update the LCD before ending
+  sei();   // enable interrupts
+  for ( int i=5; i--; lcd_update())
+  {
+     delay(200);	
+  }
+  cli();   // disable interrupts
   suicide();
   while(1) { /* Intentionally left empty */ } // Wait for reset
 }
@@ -4509,3 +4600,29 @@ bool setTargetedHotend(int code){
   return false;
 }
 
+
+float calculate_volumetric_multiplier(float diameter) {
+	float area = .0;
+	float radius = .0;
+
+	radius = diameter * .5;
+	if (! volumetric_enabled || radius == 0) {
+		area = 1;
+	}
+	else {
+		area = M_PI * pow(radius, 2);
+	}
+
+	return 1.0 / area;
+}
+
+void calculate_volumetric_multipliers() {
+	volumetric_multiplier[0] = calculate_volumetric_multiplier(filament_size[0]);
+#if EXTRUDERS > 1
+	volumetric_multiplier[1] = calculate_volumetric_multiplier(filament_size[1]);
+#if EXTRUDERS > 2
+	volumetric_multiplier[2] = calculate_volumetric_multiplier(filament_size[2]);
+#endif
+#endif
+}
+

Marlin/SdFatUtil.cpp

@@ -26,21 +26,24 @@
 /** Amount of free RAM
  * \return The number of free bytes.
  */
+#ifdef __arm__
+extern "C" char* sbrk(int incr);
 int SdFatUtil::FreeRam() {
-  extern int  __bss_end;
-  extern int* __brkval;
-  int free_memory;
-  if (reinterpret_cast<int>(__brkval) == 0) {
-    // if no heap use from end of bss section
-    free_memory = reinterpret_cast<int>(&free_memory)
-                  - reinterpret_cast<int>(&__bss_end);
-  } else {
-    // use from top of stack to heap
-    free_memory = reinterpret_cast<int>(&free_memory)
-                  - reinterpret_cast<int>(__brkval);
-  }
-  return free_memory;
+  char top;
+  return &top - reinterpret_cast<char*>(sbrk(0));
 }
+#else  // __arm__
+extern char *__brkval;
+extern char __bss_end;
+/** Amount of free RAM
+ * \return The number of free bytes.
+ */
+int SdFatUtil::FreeRam() {
+  char top;
+  return __brkval ? &top - __brkval : &top - &__bss_end;
+}
+#endif  // __arm
+
 //------------------------------------------------------------------------------
 /** %Print a string in flash memory.
  *

Marlin/createTemperatureLookupMarlin.py

@@ -1,156 +0,0 @@
-#!/usr/bin/python
-#
-# Creates a C code lookup table for doing ADC to temperature conversion
-# on a microcontroller
-# based on: http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html
-"""Thermistor Value Lookup Table Generator
-
-Generates lookup to temperature values for use in a microcontroller in C format based on: 
-http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html
-
-The main use is for Arduino programs that read data from the circuit board described here:
-http://make.rrrf.org/ts-1.0
-
-Usage: python createTemperatureLookup.py [options]
-
-Options:
-  -h, --help        show this help
-  --rp=...          pull-up resistor
-  --t1=ttt:rrr      low temperature temperature:resistance point (around 25C)
-  --t2=ttt:rrr      middle temperature temperature:resistance point (around 150C)
-  --t3=ttt:rrr      high temperature temperature:resistance point (around 250C)
-  --num-temps=...   the number of temperature points to calculate (default: 20)
-"""
-
-from math import *
-import sys
-import getopt
-
-class Thermistor:
-    "Class to do the thermistor maths"
-    def __init__(self, rp, t1, r1, t2, r2, t3, r3):
-        t1 = t1 + 273.15               # low temperature (25C)
-        r1 = r1                        # resistance at low temperature
-        t2 = t2 + 273.15               # middle temperature (150C)
-        r2 = r2                        # resistance at middle temperature
-        t3 = t3 + 273.15               # high temperature (250C)
-        r3 = r3                        # resistance at high temperature
-        self.rp = rp                   # pull-up resistance
-        self.vadc = 5.0                # ADC reference
-        self.vcc = 5.0                 # supply voltage to potential divider
-        a1 = log(r1)
-        a2 = log(r2)
-        a3 = log(r3)
-        z = a1 - a2
-        y = a1 - a3
-        x = 1/t1 - 1/t2
-        w = 1/t1 - 1/t3
-        v = pow(a1,3) - pow(a2,3)
-        u = pow(a1,3) - pow(a3,3)
-        c3 = (x-z*w/y)/(v-z*u/y)
-        c2 = (x-c3*v)/z
-        c1 = 1/t1-c3*pow(a1,3)-c2*a1
-        self.c1 = c1
-        self.c2 = c2
-        self.c3 = c3
-
-    def res(self,adc):
-        "Convert ADC reading into a resolution"
-        res = self.temp(adc)-self.temp(adc+1)
-        return res
-
-    def v(self,adc):
-        "Convert ADC reading into a Voltage"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        return v
-
-    def r(self,adc):
-        "Convert ADC reading into a resistance in Ohms"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        r = self.rp * v / (self.vcc - v)    # resistance of thermistor
-        return r
-
-    def temp(self,adc):
-        "Convert ADC reading into a temperature in Celcius"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        r = self.rp * v / (self.vcc - v)    # resistance of thermistor
-        lnr = log(r)
-        Tinv = self.c1 + (self.c2*lnr) + (self.c3*pow(lnr,3))
-        return (1/Tinv) - 273.15        # temperature
-
-    def adc(self,temp):
-        "Convert temperature into a ADC reading"
-        y = (self.c1 - (1/(temp+273.15))) / (2*self.c3)
-	x = sqrt(pow(self.c2 / (3*self.c3),3) + pow(y,2))
-        r = exp(pow(x-y,1.0/3) - pow(x+y,1.0/3)) # resistance of thermistor
-        return (r / (self.rp + r)) * (1024)
-
-def main(argv):
-
-    rp = 4700;
-    t1 = 25;
-    r1 = 100000;
-    t2 = 150;
-    r2 = 1641.9;
-    t3 = 250;
-    r3 = 226.15;
-    num_temps = int(36);
-    
-    try:
-        opts, args = getopt.getopt(argv, "h", ["help", "rp=", "t1=", "t2=", "t3=", "num-temps="])
-    except getopt.GetoptError as err:
-        print  str(err)
-        usage()
-        sys.exit(2)
-        
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-            usage()
-            sys.exit()
-        elif opt == "--rp":
-            rp = int(arg)
-        elif opt == "--t1":
-            arg =  arg.split(':')
-            t1 = float( arg[0])
-            r1 = float( arg[1])
-        elif opt == "--t2":
-            arg =  arg.split(':')
-            t2 = float( arg[0])
-            r2 = float( arg[1])
-        elif opt == "--t3":
-            arg =  arg.split(':')
-            t3 = float( arg[0])
-            r3 = float( arg[1])
-        elif opt == "--num-temps":
-            num_temps =  int(arg)
-
-    max_adc = (1024 ) - 1
-    min_temp = 0
-    max_temp = 350
-    increment = int(max_adc/(num_temps-1));
-            
-    t = Thermistor(rp, t1, r1, t2, r2, t3, r3)
-    tmp = (min_temp - max_temp) / (num_temps-1)
-    print tmp
-    temps = range(max_temp, min_temp + tmp, tmp);
-
-    print "// Thermistor lookup table for Marlin"
-    print "// ./createTemperatureLookupMarlin.py --rp=%s --t1=%s:%s --t2=%s:%s --t3=%s:%s --num-temps=%s" % (rp, t1, r1, t2, r2, t3, r3, num_temps)
-    print "// Steinhart-Hart Coefficients: %.15g, %.15g,  %.15g " % (t.c1, t.c2, t.c3)
-    print "//#define NUMTEMPS %s" % (len(temps))
-    print "const short temptable[NUMTEMPS][2] PROGMEM = {"
-
-    counter = 0
-    for temp in temps:
-        counter = counter +1
-        if counter == len(temps):
-            print "   {(short)(%.2f*OVERSAMPLENR), %s}  // v=%s r=%s res=%s C/count" % ((t.adc(temp)), temp, t.v(t.adc(temp)), t.r(t.adc(temp)),t.res(t.adc(temp)))
-        else:
-            print "   {(short)(%.2f*OVERSAMPLENR), %s}, // v=%s r=%s res=%s C/count" % ((t.adc(temp)), temp, t.v(t.adc(temp)), t.r(t.adc(temp)),t.res(t.adc(temp)))
-    print "};"
-    
-def usage():
-    print __doc__
-
-if __name__ == "__main__":
-    main(sys.argv[1:])

Marlin/dogm_lcd_implementation.h

@@ -41,7 +41,7 @@
 
 /* Russian language not supported yet, needs custom font
 
-#if LANGUAGE_CHOICE == ru
+#ifdef LANGUAGE_RU
 #include "LiquidCrystalRus.h"
 #define LCD_CLASS LiquidCrystalRus
 #else
@@ -126,7 +126,7 @@ static void lcd_implementation_init()
 			u8g.setFont(u8g_font_6x10_marlin);
 			u8g.drawStr(62,10,"MARLIN"); 
 			u8g.setFont(u8g_font_5x8);
-			u8g.drawStr(62,19,"V1.0.0 RC2-mm");
+			u8g.drawStr(62,19,"V1.0.2");
 			u8g.setFont(u8g_font_6x10_marlin);
 			u8g.drawStr(62,28,"by ErikZalm");
 			u8g.drawStr(62,41,"DOGM128 LCD");
@@ -337,7 +337,7 @@ static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, c
 		u8g.setColorIndex(1);		// restore settings to black on white
 }
 
-static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data, bool pgm) {
+static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, const char* data, bool pgm) {
   char c;
   uint8_t n = LCD_WIDTH - 1 - 2 - (pgm ? strlen_P(data) : strlen(data));
 		
@@ -366,6 +366,8 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
 #define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
@@ -384,6 +386,8 @@ static void _drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char p
 #define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))

Marlin/example_configurations/SCARA/Configuration.h

@@ -571,7 +571,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // The Elefu RA Board Control Panel
 // http://www.elefu.com/index.php?route=product/product&product_id=53
-// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
 //automatic expansion

Marlin/example_configurations/delta/Configuration.h

@@ -475,9 +475,16 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // The Elefu RA Board Control Panel
 // http://www.elefu.com/index.php?route=product/product&product_id=53
-// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
+// Delta calibration menu
+// uncomment to add three points calibration menu option.
+// See http://minow.blogspot.com/index.html#4918805519571907051
+// If needed, adjust the X, Y, Z calibration coordinates
+// in ultralcd.cpp@lcd_delta_calibrate_menu()
+// #define DELTA_CALIBRATION_MENU
+
 //automatic expansion
 #if defined (MAKRPANEL)
  #define DOGLCD

Marlin/example_configurations/makibox/Configuration.h

@@ -543,7 +543,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // The Elefu RA Board Control Panel
 // http://www.elefu.com/index.php?route=product/product&product_id=53
-// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
 //automatic expansion

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -557,7 +557,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // The Elefu RA Board Control Panel
 // http://www.elefu.com/index.php?route=product/product&product_id=53
-// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARUDINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+// REMEMBER TO INSTALL LiquidCrystal_I2C.h in your ARDUINO library folder: https://github.com/kiyoshigawa/LiquidCrystal_I2C
 //#define RA_CONTROL_PANEL
 
 //automatic expansion

Marlin/language.h

@@ -1,10 +1,14 @@
 #ifndef LANGUAGE_H
 #define LANGUAGE_H
 
+#define LANGUAGE_CONCAT(M)       #M
+#define GENERATE_LANGUAGE_INCLUDE(M)  LANGUAGE_CONCAT(language_##M.h)
+
+
 // NOTE: IF YOU CHANGE LANGUAGE FILES OR MERGE A FILE WITH CHANGES
 //
-//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h" 
-//   ==> ALSO TRY ALL AVAILABLE "LANGUAGE_CHOICE" OPTIONS
+//   ==> ALWAYS TRY TO COMPILE MARLIN WITH/WITHOUT "ULTIPANEL" / "ULTRALCD" / "SDSUPPORT" #define IN "Configuration.h"
+//   ==> ALSO TRY ALL AVAILABLE LANGUAGE OPTIONS
 
 // Languages
 // en English
@@ -21,37 +25,37 @@
 // ca Catalan
 // eu Basque-Euskera
 
-#ifndef LANGUAGE_CHOICE
-	#define LANGUAGE_CHOICE en  // Pick your language from the list above
-#endif
-
-#if LANGUAGE_CHOICE >= 1
-  #error "Languages now uses ISO language codes instead of numbers."
+#ifndef LANGUAGE_INCLUDE
+  // pick your language from the list above
+  #define LANGUAGE_INCLUDE GENERATE_LANGUAGE_INCLUDE(en)
 #endif
 
 #define PROTOCOL_VERSION "1.0"
 
 #if MB(ULTIMAKER)|| MB(ULTIMAKER_OLD)|| MB(ULTIMAIN_2)
-	#define MACHINE_NAME "Ultimaker"
-	#define FIRMWARE_URL "http://firmware.ultimaker.com"
+  #define MACHINE_NAME "Ultimaker"
+  #define FIRMWARE_URL "http://firmware.ultimaker.com"
 #elif MB(RUMBA)
-	#define MACHINE_NAME "Rumba"
-	#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
+  #define MACHINE_NAME "Rumba"
+  #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin"
 #elif MB(3DRAG)
-	#define MACHINE_NAME "3Drag"
-	#define FIRMWARE_URL "http://3dprint.elettronicain.it/"
+  #define MACHINE_NAME "3Drag"
+  #define FIRMWARE_URL "http://3dprint.elettronicain.it/"
 #elif MB(5DPRINT)
-	#define MACHINE_NAME "Makibox"
-	#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
+  #define MACHINE_NAME "Makibox"
+  #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin"
+#elif MB(SAV_MKI)
+  #define MACHINE_NAME "SAV MkI"
+  #define FIRMWARE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
 #else
-	#ifdef CUSTOM_MENDEL_NAME
-		#define MACHINE_NAME CUSTOM_MENDEL_NAME
-	#else
-		#define MACHINE_NAME "Mendel"
-	#endif
+  #ifdef CUSTOM_MENDEL_NAME
+    #define MACHINE_NAME CUSTOM_MENDEL_NAME
+  #else
+    #define MACHINE_NAME "Mendel"
+  #endif
 
 // Default firmware set to Mendel
-	#define FIRMWARE_URL "https://github.com/ErikZalm/Marlin/"
+  #define FIRMWARE_URL "https://github.com/MarlinFirmware/Marlin"
 #endif
 
 
@@ -103,7 +107,7 @@
 #define MSG_HEATING_COMPLETE                "Heating done."
 #define MSG_BED_HEATING                     "Bed Heating."
 #define MSG_BED_DONE                        "Bed done."
-#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
+#define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n"
 #define MSG_COUNT_X                         " Count X: "
 #define MSG_ERR_KILLED                      "Printer halted. kill() called!"
 #define MSG_ERR_STOPPED                     "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
@@ -136,7 +140,7 @@
 #define MSG_SD_PRINTING_BYTE                "SD printing byte "
 #define MSG_SD_NOT_PRINTING                 "Not SD printing"
 #define MSG_SD_ERR_WRITE_TO_FILE            "error writing to file"
-#define MSG_SD_CANT_ENTER_SUBDIR 			"Cannot enter subdir: "
+#define MSG_SD_CANT_ENTER_SUBDIR            "Cannot enter subdir: "
 
 #define MSG_STEPPER_TOO_HIGH                "Steprate too high: "
 #define MSG_ENDSTOPS_HIT                    "endstops hit: "
@@ -145,36 +149,10 @@
 #define MSG_BABYSTEPPING_X                  "Babystepping X"
 #define MSG_BABYSTEPPING_Y                  "Babystepping Y"
 #define MSG_BABYSTEPPING_Z                  "Babystepping Z"
-#define MSG_SERIAL_ERROR_MENU_STRUCTURE		"Error in menu structure"
+#define MSG_SERIAL_ERROR_MENU_STRUCTURE     "Error in menu structure"
 
 // LCD Menu Messages
 
-#if   LANGUAGE_CHOICE == en // English
-  #include "language_en.h"
-#elif LANGUAGE_CHOICE == pl // Polish
-  #include "language_pl.h"
-#elif LANGUAGE_CHOICE == fr // French
-  #include "language_fr.h"
-#elif LANGUAGE_CHOICE == de // German
-  #include "language_de.h"
-#elif LANGUAGE_CHOICE == es // Spanish
-  #include "language_es.h"
-#elif LANGUAGE_CHOICE == ru // Russian
-  #include "language_ru.h"
-#elif LANGUAGE_CHOICE == it // Italian
-  #include "language_it.h"
-#elif LANGUAGE_CHOICE == pt // Portuguese
-  #include "language_pt.h"
-#elif LANGUAGE_CHOICE == fi // Finnish
-  #include "language_fi.h"
-#elif LANGUAGE_CHOICE == an // Aragonese
-  #include "language_an.h"
-#elif LANGUAGE_CHOICE == nl // Dutch
-  #include "language_nl.h"
-#elif LANGUAGE_CHOICE == ca // Catalan
-  #include "language_ca.h"
-#elif LANGUAGE_CHOICE == eu // Basque-Euskera
-  #include "language_eu.h"
-#endif
+#include LANGUAGE_INCLUDE
 
 #endif //__LANGUAGE_H

Marlin/language_an.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "E trangos/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Movimiento"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "Contrast"
 #define MSG_STORE_EPROM                     "Alzar Memoria"
 #define MSG_LOAD_EPROM                      "Cargar Memoria"
@@ -136,4 +141,12 @@
 #define MSG_RETRACT_ARROW                   "Retraer \x7E"
 #define MSG_STEPPER_RELEASED                "Desacoplada."
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_AN_H

Marlin/language_ca.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Epassos/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Moviment"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "Contrast de LCD"
 #define MSG_STORE_EPROM                     "Desar a memoria"
 #define MSG_LOAD_EPROM                      "Carregar de mem."
@@ -127,4 +132,12 @@
 
 #define MSG_RECTRACT                        "Retreure"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_CA_H

Marlin/language_de.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Esteps/mm"
 #define MSG_TEMPERATURE                     "Temperatur"
 #define MSG_MOTION                          "Bewegung"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD contrast"
 #define MSG_STORE_EPROM                     "EPROM speichern"
 #define MSG_LOAD_EPROM                      "EPROM laden"
@@ -128,4 +133,12 @@
 #define MSG_STEPPER_RELEASED                "Stepper frei"
 #define MSG_RECTRACT_WIDE                   "Rectract"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_DE_H

Marlin/language_en.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Esteps/mm"
 #define MSG_TEMPERATURE                     "Temperature"
 #define MSG_MOTION                          "Motion"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD contrast"
 #define MSG_STORE_EPROM                     "Store memory"
 #define MSG_LOAD_EPROM                      "Load memory"
@@ -127,4 +132,12 @@
 
 #define MSG_RECTRACT                        "Rectract"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_EN_H

Marlin/language_es.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "E pasos/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Movimiento"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "Contraste"
 #define MSG_STORE_EPROM                     "Guardar memoria"
 #define MSG_LOAD_EPROM                      "Cargar memoria"
@@ -136,4 +141,12 @@
 #define MSG_RETRACT_ARROW                   "Retraer \x7E"
 #define MSG_STEPPER_RELEASED                "Desacoplada."
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_ES_H

Marlin/language_eu.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "E pausoak/mm"
 #define MSG_TEMPERATURE                     "Tenperatura"
 #define MSG_MOTION                          "Mugimendua"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD kontrastea"
 #define MSG_STORE_EPROM                     "Gorde memoria"
 #define MSG_LOAD_EPROM                      "Kargatu memoria"
@@ -127,4 +132,12 @@
 
 #define MSG_RECTRACT                        "Atzera eragin"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_EU_H

Marlin/language_fi.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Esteps/mm"
 #define MSG_TEMPERATURE                     "Lampotila"
 #define MSG_MOTION                          "Liike"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD contrast"
 #define MSG_STORE_EPROM                     "Tallenna muistiin"
 #define MSG_LOAD_EPROM                      "Lataa muistista"
@@ -127,4 +132,12 @@
 
 #define MSG_RECTRACT                        "Veda takaisin"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_FI_H

Marlin/language_fr.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Epas/mm"
 #define MSG_TEMPERATURE                     "Temperature"
 #define MSG_MOTION                          "Mouvement"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "Contraste LCD"
 #define MSG_STORE_EPROM                     "Sauver config"
 #define MSG_LOAD_EPROM                      "Lire config"
@@ -128,4 +133,12 @@
 #define MSG_RECTRACT                        "Rectract"
 #define MSG_STEPPER_RELEASED                "RELACHE."
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_FR_H

Marlin/language_it.h

@@ -15,37 +15,37 @@
 #define MSG_AUTOSTART                       "Autostart"
 #define MSG_DISABLE_STEPPERS                "Disabilita Motori"
 #define MSG_AUTO_HOME                       "Auto Home"
-#define MSG_SET_HOME_OFFSETS                "Set home offsets"
+#define MSG_SET_HOME_OFFSETS                "Setta offset home"
 #define MSG_SET_ORIGIN                      "Imposta Origine"
 #define MSG_PREHEAT_PLA                     "Preriscalda PLA"
 #define MSG_PREHEAT_PLA0                    "Preriscalda PLA 1"
 #define MSG_PREHEAT_PLA1                    "Preriscalda PLA 2"
 #define MSG_PREHEAT_PLA2                    "Preriscalda PLA 3"
-#define MSG_PREHEAT_PLA012                  "Preris. PLA Tutto"
-#define MSG_PREHEAT_PLA_BEDONLY             "Preri. PLA Piatto"
-#define MSG_PREHEAT_PLA_SETTINGS            "Preris. PLA Conf"
+#define MSG_PREHEAT_PLA012                  "Prer. PLA Tutto"
+#define MSG_PREHEAT_PLA_BEDONLY             "Prer. PLA Piatto"
+#define MSG_PREHEAT_PLA_SETTINGS            "Config. prer. PLA"
 #define MSG_PREHEAT_ABS                     "Preriscalda ABS"
 #define MSG_PREHEAT_ABS0                    "Preriscalda ABS 1"
 #define MSG_PREHEAT_ABS1                    "Preriscalda ABS 2"
 #define MSG_PREHEAT_ABS2                    "Preriscalda ABS 3"
-#define MSG_PREHEAT_ABS012                  "Preris. ABS Tutto"
-#define MSG_PREHEAT_ABS_BEDONLY             "Preri. ABS Piatto"
-#define MSG_PREHEAT_ABS_SETTINGS            "Preris. ABS Conf"
+#define MSG_PREHEAT_ABS012                  "Prer. ABS Tutto"
+#define MSG_PREHEAT_ABS_BEDONLY             "Prer. ABS Piatto"
+#define MSG_PREHEAT_ABS_SETTINGS            "Config. prer. ABS"
 #define MSG_COOLDOWN                        "Raffredda"
-#define MSG_SWITCH_PS_ON                    "Switch Power On"
-#define MSG_SWITCH_PS_OFF                   "Switch Power Off"
+#define MSG_SWITCH_PS_ON                    "Accendi aliment."
+#define MSG_SWITCH_PS_OFF                   "Spegni aliment."
 #define MSG_EXTRUDE                         "Estrudi"
 #define MSG_RETRACT                         "Ritrai"
 #define MSG_MOVE_AXIS                       "Muovi Asse"
-#define MSG_MOVE_X                          "Move X"
-#define MSG_MOVE_Y                          "Move Y"
-#define MSG_MOVE_Z                          "Move Z"
-#define MSG_MOVE_E                          "Extruder"
-#define MSG_MOVE_E1                         "Extruder2"
-#define MSG_MOVE_E2                         "Extruder3"
-#define MSG_MOVE_01MM                       "Move 0.1mm"
-#define MSG_MOVE_1MM                        "Move 1mm"
-#define MSG_MOVE_10MM                       "Move 10mm"
+#define MSG_MOVE_X                          "Muovi X"
+#define MSG_MOVE_Y                          "Muovi Y"
+#define MSG_MOVE_Z                          "Muovi Z"
+#define MSG_MOVE_E                          "Estrusore"
+#define MSG_MOVE_E1                         "Estrusore 2"
+#define MSG_MOVE_E2                         "Estrusore 3"
+#define MSG_MOVE_01MM                       "Muovi di 0.1mm"
+#define MSG_MOVE_1MM                        "Muovi di   1mm"
+#define MSG_MOVE_10MM                       "Muovi di  10mm"
 #define MSG_SPEED                           "Velcità"
 #define MSG_NOZZLE                          "Ugello"
 #define MSG_NOZZLE1                         "Ugello2"
@@ -61,13 +61,13 @@
 #define MSG_MAX                             " \002 Max:"
 #define MSG_FACTOR                          " \002 Fact:"
 #define MSG_AUTOTEMP                        "Autotemp"
-#define MSG_ON                              "On "
-#define MSG_OFF                             "Off"
+#define MSG_ON                              "ON "
+#define MSG_OFF                             "OFF"
 #define MSG_PID_P                           "PID-P"
 #define MSG_PID_I                           "PID-I"
 #define MSG_PID_D                           "PID-D"
 #define MSG_PID_C                           "PID-C"
-#define MSG_ACC                             "Accel"
+#define MSG_ACC                             "Accel."
 #define MSG_VXY_JERK                        "Vxy-jerk"
 #define MSG_VZ_JERK                         "Vz-jerk"
 #define MSG_VE_JERK                         "Ve-jerk"
@@ -86,7 +86,12 @@
 #define MSG_ESTEPS                          "Epassi/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Movimento"
-#define MSG_CONTRAST                        "LCD contrast"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm³"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Diam. filo 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Diam. filo 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Diam. filo 3"
+#define MSG_CONTRAST                        "Contrasto LCD"
 #define MSG_STORE_EPROM                     "Salva in EEPROM"
 #define MSG_LOAD_EPROM                      "Carica da EEPROM"
 #define MSG_RESTORE_FAILSAFE                "Impostaz. default"
@@ -95,17 +100,17 @@
 #define MSG_PREPARE                         "Prepara"
 #define MSG_TUNE                            "Adatta"
 #define MSG_PAUSE_PRINT                     "Pausa"
-#define MSG_RESUME_PRINT                    "Riprendi Stampa"
-#define MSG_STOP_PRINT                      "Arresta Stampa"
+#define MSG_RESUME_PRINT                    "Riprendi stampa"
+#define MSG_STOP_PRINT                      "Arresta stampa"
 #define MSG_CARD_MENU                       "SD Card Menu"
 #define MSG_NO_CARD                         "No SD Card"
 #define MSG_DWELL                           "Sospensione..."
 #define MSG_USERWAIT                        "Attendi Utente..."
 #define MSG_RESUMING                        "Riprendi Stampa"
-#define MSG_PRINT_ABORTED                   "Print aborted"
-#define MSG_NO_MOVE                         "Nessun Movimento."
-#define MSG_KILLED                          "UCCISO. "
-#define MSG_STOPPED                         "ARRESTATO. "
+#define MSG_PRINT_ABORTED                   "Stampa abortita"
+#define MSG_NO_MOVE                         "Nessun Movimento"
+#define MSG_KILLED                          "UCCISO "
+#define MSG_STOPPED                         "ARRESTATO "
 #define MSG_CONTROL_RETRACT                 "Ritrai mm"
 #define MSG_CONTROL_RETRACT_SWAP            "Scamb. Ritrai mm"
 #define MSG_CONTROL_RETRACTF                "Ritrai  V"
@@ -123,8 +128,16 @@
 #define MSG_BABYSTEP_X                      "Babystep X"
 #define MSG_BABYSTEP_Y                      "Babystep Y"
 #define MSG_BABYSTEP_Z                      "Babystep Z"
-#define MSG_ENDSTOP_ABORT                   "Endstop abort"
+#define MSG_ENDSTOP_ABORT                   "Finecorsa abort"
 
 #define MSG_RECTRACT                        "Ritrai"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Calibraz. Delta"
+    #define MSG_DELTA_CALIBRATE_X           "Calibra X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibra Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibra Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibra Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_IT_H

Marlin/language_nl.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "Esteps/mm"
 #define MSG_TEMPERATURE                     "Temperatuur"
 #define MSG_MOTION                          "Beweging"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD contrast"
 #define MSG_STORE_EPROM                     "Geheugen opslaan"
 #define MSG_LOAD_EPROM                      "Geheugen laden"
@@ -127,4 +132,12 @@
 
 #define MSG_RECTRACT                        "Terugtrekken"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_NL_H

Marlin/language_pl.h

@@ -86,6 +86,11 @@
 #define MSG_ESTEPS                          "krokiE/mm"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Ruch"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "Kontrast LCD"
 #define MSG_STORE_EPROM                     "Zapisz w pamieci"
 #define MSG_LOAD_EPROM                      "Wczytaj z pamieci"
@@ -128,4 +133,12 @@
 #define MSG_RECTRACT                        "Wycofanie"
 #define MSG_STEPPER_RELEASED                "Zwolniony."
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_PL_H

Marlin/language_pt.h

@@ -13,9 +13,9 @@
 #define MSG_SD_REMOVED                      "Cartao removido"
 #define MSG_MAIN                            " Menu principal \003"
 #define MSG_AUTOSTART                       "Autostart"
-#define MSG_DISABLE_STEPPERS                " Apagar motores"
+#define MSG_DISABLE_STEPPERS                " Parar motores"
 #define MSG_AUTO_HOME                       "Ir para origen"
-#define MSG_SET_HOME_OFFSETS                "Set home offsets"
+#define MSG_SET_HOME_OFFSETS                "def. orig. offset"
 #define MSG_SET_ORIGIN                      "Estabelecer orig."
 #define MSG_PREHEAT_PLA                     "Pre-aquecer PLA"
 #define MSG_PREHEAT_PLA0                    " pre-aquecer PLA 1"
@@ -23,29 +23,29 @@
 #define MSG_PREHEAT_PLA2                    " pre-aquecer PLA 3"
 #define MSG_PREHEAT_PLA012                  " pre-aq. PLA Tudo"
 #define MSG_PREHEAT_PLA_BEDONLY             " pre-aq. PLA \002Base"
-#define MSG_PREHEAT_PLA_SETTINGS            "PLA setting"
+#define MSG_PREHEAT_PLA_SETTINGS            "Config. PLA"
 #define MSG_PREHEAT_ABS                     "Pre-aquecer ABS"
 #define MSG_PREHEAT_ABS0                    " pre-aquecer ABS 1"
 #define MSG_PREHEAT_ABS1                    " pre-aquecer ABS 2"
 #define MSG_PREHEAT_ABS2                    " pre-aquecer ABS 3"
 #define MSG_PREHEAT_ABS012                  " pre-aq. ABS Tudo"
 #define MSG_PREHEAT_ABS_BEDONLY             " pre-aq. ABS \002Base"
-#define MSG_PREHEAT_ABS_SETTINGS            "ABS setting"
+#define MSG_PREHEAT_ABS_SETTINGS            "Config. ABS"
 #define MSG_COOLDOWN                        "Esfriar"
-#define MSG_SWITCH_PS_ON                    "Switch Power On"
-#define MSG_SWITCH_PS_OFF                   "Switch Power Off"
+#define MSG_SWITCH_PS_ON                    "Interruptor On"
+#define MSG_SWITCH_PS_OFF                   "Interruptor Off"
 #define MSG_EXTRUDE                         "Extrudar"
 #define MSG_RETRACT                         "Retrair"
 #define MSG_MOVE_AXIS                       "Mover eixo      \x7E"
-#define MSG_MOVE_X                          "Move X"
-#define MSG_MOVE_Y                          "Move Y"
-#define MSG_MOVE_Z                          "Move Z"
-#define MSG_MOVE_E                          "Extruder"
-#define MSG_MOVE_E1                         "Extruder2"
-#define MSG_MOVE_E2                         "Extruder3"
-#define MSG_MOVE_01MM                       "Move 0.1mm"
-#define MSG_MOVE_1MM                        "Move 1mm"
-#define MSG_MOVE_10MM                       "Move 10mm"
+#define MSG_MOVE_X                          "Mover X"
+#define MSG_MOVE_Y                          "Mover Y"
+#define MSG_MOVE_Z                          "Mover Z"
+#define MSG_MOVE_E                          "Extrusor"
+#define MSG_MOVE_E1                         "Extrusor2"
+#define MSG_MOVE_E2                         "Extrusor3"
+#define MSG_MOVE_01MM                       "Mover 0.1mm"
+#define MSG_MOVE_1MM                        "Mover 1mm"
+#define MSG_MOVE_10MM                       "Mover 10mm"
 #define MSG_SPEED                           "Velocidade:"
 #define MSG_NOZZLE                          "\002Nozzle:"
 #define MSG_NOZZLE1                         "\002Nozzle2:"
@@ -86,7 +86,12 @@
 #define MSG_ESTEPS                          "Epasso/mm:"
 #define MSG_TEMPERATURE                     "Temperatura"
 #define MSG_MOTION                          "Movimento"
-#define MSG_CONTRAST                        "Contrast"
+#define MSG_VOLUMETRIC                      "Filamento"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
+#define MSG_CONTRAST                        "Contraste"
 #define MSG_STORE_EPROM                     "Guardar memoria"
 #define MSG_LOAD_EPROM                      "Carregar memoria"
 #define MSG_RESTORE_FAILSAFE                "Rest. de emergen."
@@ -101,8 +106,8 @@
 #define MSG_NO_CARD                         "Sem cartao SD"
 #define MSG_DWELL                           "Repouso..."
 #define MSG_USERWAIT                        "Esperando ordem"
-#define MSG_RESUMING                        "Resuming print"
-#define MSG_PRINT_ABORTED                   "Print aborted"
+#define MSG_RESUMING                        "Resum. impressao"
+#define MSG_PRINT_ABORTED                   "impress. abortada"
 #define MSG_NO_MOVE                         "Sem movimento"
 #define MSG_KILLED                          "PARADA DE EMERG."
 #define MSG_STOPPED                         "PARADA. "
@@ -113,10 +118,10 @@
 #define MSG_CONTROL_RETRACT_RECOVER         " DesRet +mm:"
 #define MSG_CONTROL_RETRACT_RECOVER_SWAP    "Troca DesRet +mm:"
 #define MSG_CONTROL_RETRACT_RECOVERF        " DesRet  V:"
-#define MSG_AUTORETRACT                     " AutoRetr.:"
-#define MSG_FILAMENTCHANGE                  "Change filament"
-#define MSG_INIT_SDCARD                     "Init. SD-Card"
-#define MSG_CNG_SDCARD                      "Change SD-Card"
+#define MSG_AUTORETRACT                     " Auto Retr.:"
+#define MSG_FILAMENTCHANGE                  "Trocar filamento"
+#define MSG_INIT_SDCARD                     "Cartao SD Inic."
+#define MSG_CNG_SDCARD                      "Cartao SD trocado"
 #define MSG_ZPROBE_OUT                      "Son. fora da mesa"
 #define MSG_POSITION_UNKNOWN                "XY antes de Z"
 #define MSG_ZPROBE_ZOFFSET                  "Z Offset"
@@ -130,6 +135,14 @@
 #define MSG_PREPARE_ALT                     "Preparar \003"
 #define MSG_CONTROL_ARROW                   "Controle \x7E"
 #define MSG_RETRACT_ARROW                   "Retrair \x7E"
-#define MSG_STEPPER_RELEASED                "Lancado."
+#define MSG_STEPPER_RELEASED                "Iniciado."
+
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Calibracao Delta"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrar X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrar Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrar Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrar Centro"
+#endif // DELTA_CALIBRATION_MENU
 
 #endif // LANGUAGE_PT_H

Marlin/language_ru.h

@@ -8,6 +8,8 @@
 #ifndef LANGUAGE_RU_H
 #define LANGUAGE_RU_H
 
+#define LANGUAGE_RU
+
 #define WELCOME_MSG                         MACHINE_NAME "Готов."
 #define MSG_SD_INSERTED                     "Карта вставлена"
 #define MSG_SD_REMOVED                      "Карта извлечена"
@@ -86,6 +88,11 @@
 #define MSG_ESTEPS                          "E шаг/mm:"
 #define MSG_TEMPERATURE                     "Температура     \x7E"
 #define MSG_MOTION                          "Скорости        \x7E"
+#define MSG_VOLUMETRIC                      "Filament"
+#define MSG_VOLUMETRIC_ENABLED		        "E in mm3"
+#define MSG_FILAMENT_SIZE_EXTRUDER_0        "Fil. Dia. 1"
+#define MSG_FILAMENT_SIZE_EXTRUDER_1        "Fil. Dia. 2"
+#define MSG_FILAMENT_SIZE_EXTRUDER_2        "Fil. Dia. 3"
 #define MSG_CONTRAST                        "LCD contrast"
 #define MSG_STORE_EPROM                     "Сохранить в EPROM"
 #define MSG_LOAD_EPROM                      "Загруз. из EPROM"
@@ -127,4 +134,12 @@
 
 #define MSG_RECTRACT                        "Откат подачи    \x7E"
 
+#ifdef DELTA_CALIBRATION_MENU
+    #define MSG_DELTA_CALIBRATE             "Delta Calibration"
+    #define MSG_DELTA_CALIBRATE_X           "Calibrate X"
+    #define MSG_DELTA_CALIBRATE_Y           "Calibrate Y"
+    #define MSG_DELTA_CALIBRATE_Z           "Calibrate Z"
+    #define MSG_DELTA_CALIBRATE_CENTER      "Calibrate Center"
+#endif // DELTA_CALIBRATION_MENU
+
 #endif // LANGUAGE_RU_H

Marlin/pins.h

@@ -904,9 +904,9 @@
   #define SCK_PIN          52
   #define MISO_PIN         50
   #define MOSI_PIN         51
-  #define MAX6675_SS       53
+  #define MAX6675_SS       66// Do not use pin 53 if there is even the remote possibility of using Dsplay/SD card
 #else
-  #define MAX6675_SS       49
+  #define MAX6675_SS       66// Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
 #endif
 
 #endif // RAMPS_OLD || RAMPS_13_EFB || RAMPS_13_EEB || RAMPS_13_EFF || 3DRAG
@@ -1400,6 +1400,7 @@
 #define PS_ON_PIN          12
 #define KILL_PIN           -1
 #define SUICIDE_PIN        54  //PIN that has to be turned on right after start, to keep power flowing.
+#define SERVO0_PIN         13  // untested
 
 #ifdef ULTRA_LCD
 
@@ -1904,6 +1905,8 @@
   #define X_STOP_PIN         13
   #define Y_STOP_PIN         14
   #define Z_STOP_PIN         15
+//  #define Z_STOP_PIN         36  // For inductive sensor.
+
   #define TEMP_0_PIN          7  // Extruder / Analog pin numbering
   #define TEMP_BED_PIN        6  // Bed / Analog pin numbering
 
@@ -1914,7 +1917,6 @@
 #define SDSS               20  // PB0 - 8 in marlin env.
 #define LED_PIN            -1
 #define PS_ON_PIN          -1
-#define KILL_PIN           -1
 #define ALARM_PIN          -1
 #define SDCARDDETECT       -1
 
@@ -1933,13 +1935,24 @@
 #define LCD_PINS_D5        -1
 #define LCD_PINS_D6        -1
 #define LCD_PINS_D7        -1
-#define BTN_EN1            -1
-#define BTN_EN2            -1
-#define BTN_ENC            -1
 
+#ifdef SAV_3DLCD
 // For LCD SHIFT register LCD
-#define SR_DATA_PIN         0
-#define SR_CLK_PIN          1
+#define SR_DATA_PIN         1
+#define SR_CLK_PIN          0
+
+#define BTN_EN1            41
+#define BTN_EN2            40
+#define BTN_ENC            12
+
+#define KILL_PIN           42 // A2 = 42 - teensy = 40
+#define HOME_PIN          -1 // A4 = marlin 44 - teensy = 42
+
+#ifdef NUM_SERVOS
+  #define SERVO0_PIN       41 // In teensy's pin definition for pinMode (in Servo.cpp)
+#endif
+
+#endif
 
 #endif // SAV_MKI
 

Marlin/planner.cpp

@@ -715,11 +715,21 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
     if(feed_rate<minimumfeedrate) feed_rate=minimumfeedrate;
   } 
 
-  float delta_mm[4];
+/* This part of the code calculates the total length of the movement. 
+For cartesian bots, the X_AXIS is the real X movement and same for Y_AXIS.
+But for corexy bots, that is not true. The "X_AXIS" and "Y_AXIS" motors (that should be named to A_AXIS
+and B_AXIS) cannot be used for X and Y length, because A=X+Y and B=X-Y.
+So we need to create other 2 "AXIS", named X_HEAD and Y_HEAD, meaning the real displacement of the Head. 
+Having the real displacement of the head, we can calculate the total movement length and apply the desired speed.
+*/ 
   #ifndef COREXY
+    float delta_mm[4];
     delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
     delta_mm[Y_AXIS] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
   #else
+    float delta_mm[6];
+    delta_mm[X_HEAD] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];
+    delta_mm[Y_HEAD] = (target[Y_AXIS]-position[Y_AXIS])/axis_steps_per_unit[Y_AXIS];
     delta_mm[X_AXIS] = ((target[X_AXIS]-position[X_AXIS]) + (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[X_AXIS];
     delta_mm[Y_AXIS] = ((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-position[Y_AXIS]))/axis_steps_per_unit[Y_AXIS];
   #endif
@@ -731,7 +741,11 @@ block->steps_y = labs((target[X_AXIS]-position[X_AXIS]) - (target[Y_AXIS]-positi
   } 
   else
   {
-    block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS]));
+    #ifndef COREXY
+      block->millimeters = sqrt(square(delta_mm[X_AXIS]) + square(delta_mm[Y_AXIS]) + square(delta_mm[Z_AXIS]));
+	#else
+	  block->millimeters = sqrt(square(delta_mm[X_HEAD]) + square(delta_mm[Y_HEAD]) + square(delta_mm[Z_AXIS]));
+    #endif	
   }
   float inverse_millimeters = 1.0/block->millimeters;  // Inverse millimeters to remove multiple divides 
 

Marlin/scripts/createTemperatureLookupMarlin.py

@@ -0,0 +1,156 @@
+#!/usr/bin/python
+"""Thermistor Value Lookup Table Generator
+
+Generates lookup to temperature values for use in a microcontroller in C format based on: 
+http://en.wikipedia.org/wiki/Steinhart-Hart_equation
+
+The main use is for Arduino programs that read data from the circuit board described here:
+http://make.rrrf.org/ts-1.0
+
+Usage: python createTemperatureLookup.py [options]
+
+Options:
+  -h, --help        show this help
+  --rp=...          pull-up resistor
+  --t1=ttt:rrr      low temperature temperature:resistance point (around 25 degC)
+  --t2=ttt:rrr      middle temperature temperature:resistance point (around 150 degC)
+  --t3=ttt:rrr      high temperature temperature:resistance point (around 250 degC)
+  --num-temps=...   the number of temperature points to calculate (default: 36)
+"""
+
+from math import *
+import sys
+import getopt
+
+"Constants"
+ZERO   = 273.15                             # zero point of Kelvin scale
+VADC   = 5                                  # ADC voltage
+VCC    = 5                                  # supply voltage
+ARES   = 2**10                              # 10 Bit ADC resolution
+VSTEP  = VADC / ARES                        # ADC voltage resolution
+TMIN   = 0                                  # lowest temperature in table
+TMAX   = 350                                # highest temperature in table
+
+class Thermistor:
+    "Class to do the thermistor maths"
+    def __init__(self, rp, t1, r1, t2, r2, t3, r3):
+        l1 = log(r1)
+        l2 = log(r2)
+        l3 = log(r3)
+        y1 = 1.0 / (t1 + ZERO)              # adjust scale
+        y2 = 1.0 / (t2 + ZERO)
+        y3 = 1.0 / (t3 + ZERO)
+        x = (y2 - y1) / (l2 - l1)
+        y = (y3 - y1) / (l3 - l1)
+        c = (y - x) / ((l3 - l2) * (l1 + l2 + l3))
+        b = x - c * (l1**2 + l2**2 + l1*l2)
+        a = y1 - (b + l1**2 *c)*l1
+        
+        if c < 0:
+            print "//////////////////////////////////////////////////////////////////////////////////////"
+            print "// WARNING: negative coefficient 'c'! Something may be wrong with the measurements! //"
+            print "//////////////////////////////////////////////////////////////////////////////////////"
+            c = -c
+        self.c1 = a                         # Steinhart-Hart coefficients
+        self.c2 = b
+        self.c3 = c
+        self.rp = rp                        # pull-up resistance
+
+    def resol(self, adc):
+        "Convert ADC reading into a resolution"
+        res = self.temp(adc)-self.temp(adc+1)
+        return res
+
+    def voltage(self, adc):
+        "Convert ADC reading into a Voltage"
+        return adc * VSTEP                     # convert the 10 bit ADC value to a voltage
+
+    def resist(self, adc):
+        "Convert ADC reading into a resistance in Ohms"
+        r = self.rp * self.voltage(adc) / (VCC - self.voltage(adc)) # resistance of thermistor
+        return r
+
+    def temp(self, adc):
+        "Convert ADC reading into a temperature in Celcius"
+        l = log(self.resist(adc))
+        Tinv = self.c1 + self.c2*l + self.c3* l**3) # inverse temperature
+        return (1/Tinv) - ZERO              # temperature
+
+    def adc(self, temp):
+        "Convert temperature into a ADC reading"
+        x = (self.c1 - (1.0 / (temp+ZERO))) / (2*self.c3)
+        y = sqrt((self.c2 / (3*self.c3)**3 + x**2)
+        r = exp((y-x)**(1.0/3) - (y+x)**(1.0/3))
+        return (r / (self.rp + r)) * ARES
+
+def main(argv):
+    "Default values"
+    t1 = 25                                 # low temperature in Kelvin (25 degC)
+    r1 = 100000                             # resistance at low temperature (10 kOhm)
+    t2 = 150                                # middle temperature in Kelvin (150 degC)
+    r2 = 1641.9                             # resistance at middle temperature (1.6 KOhm)
+    t3 = 250                                # high temperature in Kelvin (250 degC)
+    r3 = 226.15                             # resistance at high temperature (226.15 Ohm)
+    rp = 4700;                              # pull-up resistor (4.7 kOhm)
+    num_temps = 36;                         # number of entries for look-up table
+    
+    try:
+        opts, args = getopt.getopt(argv, "h", ["help", "rp=", "t1=", "t2=", "t3=", "num-temps="])
+    except getopt.GetoptError as err:
+        print  str(err)
+        usage()
+        sys.exit(2)
+
+    for opt, arg in opts:
+        if opt in ("-h", "--help"):
+            usage()
+            sys.exit()
+        elif opt == "--rp":
+            rp = int(arg)
+        elif opt == "--t1":
+            arg =  arg.split(':')
+            t1 = float(arg[0])
+            r1 = float(arg[1])
+        elif opt == "--t2":
+            arg =  arg.split(':')
+            t2 = float(arg[0])
+            r2 = float(arg[1])
+        elif opt == "--t3":
+            arg =  arg.split(':')
+            t3 = float(arg[0])
+            r3 = float(arg[1])
+        elif opt == "--num-temps":
+            num_temps = int(arg)
+
+    t = Thermistor(rp, t1, r1, t2, r2, t3, r3)
+    increment = int((ARES-1)/(num_temps-1));
+    step = (TMIN-TMAX) / (num_temps-1)
+    low_bound = t.temp(ARES-1);
+    up_bound = t.temp(1);
+    min_temp = int(TMIN if TMIN > low_bound else low_bound)
+    max_temp = int(TMAX if TMAX < up_bound else up_bound)
+    temps = range(max_temp, TMIN+step, step);
+
+    print "// Thermistor lookup table for Marlin"
+    print "// ./createTemperatureLookupMarlin.py --rp=%s --t1=%s:%s --t2=%s:%s --t3=%s:%s --num-temps=%s" % (rp, t1, r1, t2, r2, t3, r3, num_temps)
+    print "// Steinhart-Hart Coefficients: a=%.15g, b=%.15g, c=%.15g " % (t.c1, t.c2, t.c3)
+    print "// Theoretical limits of termistor: %.2f to %.2f degC" % (low_bound, up_bound)
+    print
+    print "#define NUMTEMPS %s" % (len(temps))
+    print "const short temptable[NUMTEMPS][2] PROGMEM = {"
+
+    for temp in temps:
+        adc = t.adc(temp)
+        print "    { (short) (%7.2f * OVERSAMPLENR ), %4s }%s // v=%.3f\tr=%.3f\tres=%.3f degC/count" % (adc , temp, \
+                        ',' if temp != temps[-1] else ' ', \
+                        t.voltage(adc), \
+                        t.resist( adc), \
+                        t.resol(  adc) \
+                    )
+    print "};"
+
+def usage():
+    print __doc__
+
+if __name__ == "__main__":
+    main(sys.argv[1:])

Marlin/temperature.cpp

@@ -497,7 +497,7 @@ void manage_heater()
     SERIAL_ECHO(" iTerm ");
     SERIAL_ECHO(iTerm[e]);
     SERIAL_ECHO(" dTerm ");
-    SERIAL_ECHOLN(dTerm[e]);  
+    SERIAL_ECHOLN(dTerm[e]);
     #endif //PID_DEBUG
   #else /* PID off */
     pid_output = 0;
@@ -582,9 +582,9 @@ void manage_heater()
 		  temp_dState_bed = pid_input;
 
 		  pid_output = pTerm_bed + iTerm_bed - dTerm_bed;
-          	  if (pid_output > MAX_BED_PID) {
+          	  if (pid_output > MAX_BED_POWER) {
             	    if (pid_error_bed > 0 )  temp_iState_bed -= pid_error_bed; // conditional un-integration
-                    pid_output=PID_MAX;
+                    pid_output=MAX_BED_POWER;
           	  } else if (pid_output < 0){
             	    if (pid_error_bed < 0 )  temp_iState_bed -= pid_error_bed; // conditional un-integration
                     pid_output=0;
@@ -1049,7 +1049,7 @@ void thermal_runaway_protection(int *state, unsigned long *timer, float temperat
       {
         *timer = millis();
       } 
-      else if ( (millis() - *timer) > period_seconds*1000)
+      else if ( (millis() - *timer) > ((unsigned long) period_seconds) * 1000)
       {
         SERIAL_ERROR_START;
         SERIAL_ERRORLNPGM("Thermal Runaway, system stopped! Heater_ID: ");
@@ -1221,68 +1221,311 @@ ISR(TIMER0_COMPB_vect)
   static unsigned char temp_state = 10;
   static unsigned char pwm_count = (1 << SOFT_PWM_SCALE);
   static unsigned char soft_pwm_0;
-  #if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
+#ifdef SLOW_PWM_HEATERS
+  static unsigned char slow_pwm_count = 0;
+  static unsigned char state_heater_0 = 0;
+  static unsigned char state_timer_heater_0 = 0;
+#endif 
+#if (EXTRUDERS > 1) || defined(HEATERS_PARALLEL)
   static unsigned char soft_pwm_1;
-  #endif
-  #if EXTRUDERS > 2
+#ifdef SLOW_PWM_HEATERS
+  static unsigned char state_heater_1 = 0;
+  static unsigned char state_timer_heater_1 = 0;
+#endif 
+#endif
+#if EXTRUDERS > 2
   static unsigned char soft_pwm_2;
-  #endif
-  #if HEATER_BED_PIN > -1
+#ifdef SLOW_PWM_HEATERS
+  static unsigned char state_heater_2 = 0;
+  static unsigned char state_timer_heater_2 = 0;
+#endif 
+#endif
+#if HEATER_BED_PIN > -1
   static unsigned char soft_pwm_b;
-  #endif
+#ifdef SLOW_PWM_HEATERS
+  static unsigned char state_heater_b = 0;
+  static unsigned char state_timer_heater_b = 0;
+#endif 
+#endif
   
-  #if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
-   static unsigned long raw_filwidth_value = 0;  //added for filament width sensor
-  #endif
+#if defined(FILWIDTH_PIN) &&(FILWIDTH_PIN > -1)
+  static unsigned long raw_filwidth_value = 0;  //added for filament width sensor
+#endif
   
+#ifndef SLOW_PWM_HEATERS
+  /*
+   * standard PWM modulation
+   */
   if(pwm_count == 0){
     soft_pwm_0 = soft_pwm[0];
     if(soft_pwm_0 > 0) { 
       WRITE(HEATER_0_PIN,1);
-      #ifdef HEATERS_PARALLEL
+#ifdef HEATERS_PARALLEL
       WRITE(HEATER_1_PIN,1);
-      #endif
+#endif
     } else WRITE(HEATER_0_PIN,0);
-	
-    #if EXTRUDERS > 1
+    
+#if EXTRUDERS > 1
     soft_pwm_1 = soft_pwm[1];
     if(soft_pwm_1 > 0) WRITE(HEATER_1_PIN,1); else WRITE(HEATER_1_PIN,0);
-    #endif
-    #if EXTRUDERS > 2
+#endif
+#if EXTRUDERS > 2
     soft_pwm_2 = soft_pwm[2];
     if(soft_pwm_2 > 0) WRITE(HEATER_2_PIN,1); else WRITE(HEATER_2_PIN,0);
-    #endif
-    #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
+#endif
+#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
     soft_pwm_b = soft_pwm_bed;
     if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1); else WRITE(HEATER_BED_PIN,0);
-    #endif
-    #ifdef FAN_SOFT_PWM
+#endif
+#ifdef FAN_SOFT_PWM
     soft_pwm_fan = fanSpeedSoftPwm / 2;
     if(soft_pwm_fan > 0) WRITE(FAN_PIN,1); else WRITE(FAN_PIN,0);
-    #endif
+#endif
   }
   if(soft_pwm_0 < pwm_count) { 
-      WRITE(HEATER_0_PIN,0);
-      #ifdef HEATERS_PARALLEL
-      WRITE(HEATER_1_PIN,0);
-      #endif
-    }
-  #if EXTRUDERS > 1
+    WRITE(HEATER_0_PIN,0);
+#ifdef HEATERS_PARALLEL
+    WRITE(HEATER_1_PIN,0);
+#endif
+  }
+#if EXTRUDERS > 1
   if(soft_pwm_1 < pwm_count) WRITE(HEATER_1_PIN,0);
-  #endif
-  #if EXTRUDERS > 2
+#endif
+#if EXTRUDERS > 2
   if(soft_pwm_2 < pwm_count) WRITE(HEATER_2_PIN,0);
-  #endif
-  #if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
+#endif
+#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
   if(soft_pwm_b < pwm_count) WRITE(HEATER_BED_PIN,0);
-  #endif
-  #ifdef FAN_SOFT_PWM
+#endif
+#ifdef FAN_SOFT_PWM
   if(soft_pwm_fan < pwm_count) WRITE(FAN_PIN,0);
-  #endif
+#endif
   
   pwm_count += (1 << SOFT_PWM_SCALE);
   pwm_count &= 0x7f;
   
+#else //ifndef SLOW_PWM_HEATERS
+  /*
+   * SLOW PWM HEATERS
+   *
+   * for heaters drived by relay
+   */
+#ifndef MIN_STATE_TIME
+#define MIN_STATE_TIME 16 // MIN_STATE_TIME * 65.5 = time in milliseconds
+#endif
+  if (slow_pwm_count == 0) {
+    // EXTRUDER 0 
+    soft_pwm_0 = soft_pwm[0];
+    if (soft_pwm_0 > 0) {
+      // turn ON heather only if the minimum time is up 
+      if (state_timer_heater_0 == 0) { 
+	// if change state set timer 
+	if (state_heater_0 == 0) {
+	  state_timer_heater_0 = MIN_STATE_TIME;
+	}
+	state_heater_0 = 1;
+	WRITE(HEATER_0_PIN, 1);
+#ifdef HEATERS_PARALLEL
+	WRITE(HEATER_1_PIN, 1);
+#endif
+      }
+    } else {
+      // turn OFF heather only if the minimum time is up 
+      if (state_timer_heater_0 == 0) {
+	// if change state set timer 
+	if (state_heater_0 == 1) {
+	  state_timer_heater_0 = MIN_STATE_TIME;
+	}
+	state_heater_0 = 0;
+	WRITE(HEATER_0_PIN, 0);
+#ifdef HEATERS_PARALLEL
+	WRITE(HEATER_1_PIN, 0);
+#endif
+      }
+    }
+    
+#if EXTRUDERS > 1
+    // EXTRUDER 1
+    soft_pwm_1 = soft_pwm[1];
+    if (soft_pwm_1 > 0) {
+      // turn ON heather only if the minimum time is up 
+      if (state_timer_heater_1 == 0) { 
+	// if change state set timer 
+	if (state_heater_1 == 0) {
+	  state_timer_heater_1 = MIN_STATE_TIME;
+	}
+	state_heater_1 = 1;
+	WRITE(HEATER_1_PIN, 1);
+      }
+    } else {
+      // turn OFF heather only if the minimum time is up 
+      if (state_timer_heater_1 == 0) {
+	// if change state set timer 
+	if (state_heater_1 == 1) {
+	  state_timer_heater_1 = MIN_STATE_TIME;
+	}
+	state_heater_1 = 0;
+	WRITE(HEATER_1_PIN, 0);
+      }
+    }
+#endif
+    
+#if EXTRUDERS > 2
+    // EXTRUDER 2
+    soft_pwm_2 = soft_pwm[2];
+    if (soft_pwm_2 > 0) {
+      // turn ON heather only if the minimum time is up 
+      if (state_timer_heater_2 == 0) { 
+	// if change state set timer 
+	if (state_heater_2 == 0) {
+	  state_timer_heater_2 = MIN_STATE_TIME;
+	}
+	state_heater_2 = 1;
+	WRITE(HEATER_2_PIN, 1);
+      }
+    } else {
+      // turn OFF heather only if the minimum time is up 
+      if (state_timer_heater_2 == 0) {
+	// if change state set timer 
+	if (state_heater_2 == 1) {
+	  state_timer_heater_2 = MIN_STATE_TIME;
+	}
+	state_heater_2 = 0;
+	WRITE(HEATER_2_PIN, 0);
+      }
+    }
+#endif
+    
+#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
+    // BED
+    soft_pwm_b = soft_pwm_bed;
+    if (soft_pwm_b > 0) {
+      // turn ON heather only if the minimum time is up 
+      if (state_timer_heater_b == 0) { 
+	// if change state set timer 
+	if (state_heater_b == 0) {
+	  state_timer_heater_b = MIN_STATE_TIME;
+	}
+	state_heater_b = 1;
+	WRITE(HEATER_BED_PIN, 1);
+      }
+    } else {
+      // turn OFF heather only if the minimum time is up 
+      if (state_timer_heater_b == 0) {
+	// if change state set timer 
+	if (state_heater_b == 1) {
+	  state_timer_heater_b = MIN_STATE_TIME;
+	}
+	state_heater_b = 0;
+	WRITE(HEATER_BED_PIN, 0);
+      }
+    }
+#endif
+  } // if (slow_pwm_count == 0)
+  
+  // EXTRUDER 0 
+  if (soft_pwm_0 < slow_pwm_count) {
+    // turn OFF heather only if the minimum time is up 
+    if (state_timer_heater_0 == 0) { 
+      // if change state set timer 
+      if (state_heater_0 == 1) {
+	state_timer_heater_0 = MIN_STATE_TIME;
+      }
+      state_heater_0 = 0;
+      WRITE(HEATER_0_PIN, 0);
+#ifdef HEATERS_PARALLEL
+      WRITE(HEATER_1_PIN, 0);
+#endif
+    }
+  }
+    
+#if EXTRUDERS > 1
+  // EXTRUDER 1 
+  if (soft_pwm_1 < slow_pwm_count) {
+    // turn OFF heather only if the minimum time is up 
+    if (state_timer_heater_1 == 0) { 
+      // if change state set timer 
+      if (state_heater_1 == 1) {
+	state_timer_heater_1 = MIN_STATE_TIME;
+      }
+      state_heater_1 = 0;
+      WRITE(HEATER_1_PIN, 0);
+    }
+  }
+#endif
+  
+#if EXTRUDERS > 2
+  // EXTRUDER 2
+  if (soft_pwm_2 < slow_pwm_count) {
+    // turn OFF heather only if the minimum time is up 
+    if (state_timer_heater_2 == 0) { 
+      // if change state set timer 
+      if (state_heater_2 == 1) {
+	state_timer_heater_2 = MIN_STATE_TIME;
+      }
+      state_heater_2 = 0;
+      WRITE(HEATER_2_PIN, 0);
+    }
+  }
+#endif
+  
+#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
+  // BED
+  if (soft_pwm_b < slow_pwm_count) {
+    // turn OFF heather only if the minimum time is up 
+    if (state_timer_heater_b == 0) { 
+      // if change state set timer 
+      if (state_heater_b == 1) {
+	state_timer_heater_b = MIN_STATE_TIME;
+      }
+      state_heater_b = 0;
+      WRITE(HEATER_BED_PIN, 0);
+    }
+  }
+#endif
+  
+#ifdef FAN_SOFT_PWM
+  if (pwm_count == 0){
+    soft_pwm_fan = fanSpeedSoftPwm / 2;
+    if (soft_pwm_fan > 0) WRITE(FAN_PIN,1); else WRITE(FAN_PIN,0);
+  }
+  if (soft_pwm_fan < pwm_count) WRITE(FAN_PIN,0);
+#endif
+  
+  pwm_count += (1 << SOFT_PWM_SCALE);
+  pwm_count &= 0x7f;
+  
+  // increment slow_pwm_count only every 64 pwm_count circa 65.5ms
+  if ((pwm_count % 64) == 0) {
+    slow_pwm_count++;
+    slow_pwm_count &= 0x7f;
+    
+    // Extruder 0
+    if (state_timer_heater_0 > 0) {
+      state_timer_heater_0--;
+    } 
+  
+#if EXTRUDERS > 1
+    // Extruder 1
+    if (state_timer_heater_1 > 0) 
+      state_timer_heater_1--;
+#endif
+    
+#if EXTRUDERS > 2
+    // Extruder 2
+    if (state_timer_heater_2 > 0) 
+      state_timer_heater_2--;
+#endif
+    
+#if defined(HEATER_BED_PIN) && HEATER_BED_PIN > -1
+    // Bed   
+    if (state_timer_heater_b > 0) 
+      state_timer_heater_b--;
+#endif
+  } //if ((pwm_count % 64) == 0) {
+  
+#endif //ifndef SLOW_PWM_HEATERS
+  
   switch(temp_state) {
     case 0: // Prepare TEMP_0
       #if defined(TEMP_0_PIN) && (TEMP_0_PIN > -1)

Marlin/ultralcd.cpp

@@ -59,12 +59,17 @@ static void lcd_control_temperature_menu();
 static void lcd_control_temperature_preheat_pla_settings_menu();
 static void lcd_control_temperature_preheat_abs_settings_menu();
 static void lcd_control_motion_menu();
+static void lcd_control_volumetric_menu();
 #ifdef DOGLCD
 static void lcd_set_contrast();
 #endif
 static void lcd_control_retract_menu();
 static void lcd_sdcard_menu();
 
+#ifdef DELTA_CALIBRATION_MENU
+static void lcd_delta_calibrate_menu();
+#endif // DELTA_CALIBRATION_MENU
+
 static void lcd_quick_feedback();//Cause an LCD refresh, and give the user visual or audible feedback that something has happened
 
 /* Different types of actions that can be used in menu items. */
@@ -78,6 +83,7 @@ static void menu_action_setting_edit_bool(const char* pstr, bool* ptr);
 static void menu_action_setting_edit_int3(const char* pstr, int* ptr, int minValue, int maxValue);
 static void menu_action_setting_edit_float3(const char* pstr, float* ptr, float minValue, float maxValue);
 static void menu_action_setting_edit_float32(const char* pstr, float* ptr, float minValue, float maxValue);
+static void menu_action_setting_edit_float43(const char* pstr, float* ptr, float minValue, float maxValue);
 static void menu_action_setting_edit_float5(const char* pstr, float* ptr, float minValue, float maxValue);
 static void menu_action_setting_edit_float51(const char* pstr, float* ptr, float minValue, float maxValue);
 static void menu_action_setting_edit_float52(const char* pstr, float* ptr, float minValue, float maxValue);
@@ -86,6 +92,7 @@ static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr,
 static void menu_action_setting_edit_callback_int3(const char* pstr, int* ptr, int minValue, int maxValue, menuFunc_t callbackFunc);
 static void menu_action_setting_edit_callback_float3(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
 static void menu_action_setting_edit_callback_float32(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
+static void menu_action_setting_edit_callback_float43(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
 static void menu_action_setting_edit_callback_float5(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
 static void menu_action_setting_edit_callback_float51(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
 static void menu_action_setting_edit_callback_float52(const char* pstr, float* ptr, float minValue, float maxValue, menuFunc_t callbackFunc);
@@ -334,6 +341,9 @@ static void lcd_main_menu()
         MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu);
     }else{
         MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu);
+#ifdef DELTA_CALIBRATION_MENU
+        MENU_ITEM(submenu, MSG_DELTA_CALIBRATE, lcd_delta_calibrate_menu);
+#endif // DELTA_CALIBRATION_MENU
     }
     MENU_ITEM(submenu, MSG_CONTROL, lcd_control_menu);
 #ifdef SDSUPPORT
@@ -628,6 +638,20 @@ static void lcd_prepare_menu()
     END_MENU();
 }
 
+#ifdef DELTA_CALIBRATION_MENU
+static void lcd_delta_calibrate_menu()
+{
+    START_MENU();
+    MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
+    MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28"));
+    MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_X, PSTR("G0 F8000 X-77.94 Y-45 Z0"));
+    MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_Y, PSTR("G0 F8000 X77.94 Y-45 Z0"));
+    MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_Z, PSTR("G0 F8000 X0 Y90 Z0"));
+    MENU_ITEM(gcode, MSG_DELTA_CALIBRATE_CENTER, PSTR("G0 F8000 X0 Y0 Z0"));
+    END_MENU();
+}
+#endif // DELTA_CALIBRATION_MENU
+
 float move_menu_scale;
 static void lcd_move_menu_axis();
 
@@ -721,6 +745,8 @@ static void lcd_control_menu()
     MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
     MENU_ITEM(submenu, MSG_TEMPERATURE, lcd_control_temperature_menu);
     MENU_ITEM(submenu, MSG_MOTION, lcd_control_motion_menu);
+	MENU_ITEM(submenu, MSG_VOLUMETRIC, lcd_control_volumetric_menu);
+
 #ifdef DOGLCD
 //    MENU_ITEM_EDIT(int3, MSG_CONTRAST, &lcd_contrast, 0, 63);
     MENU_ITEM(submenu, MSG_CONTRAST, lcd_set_contrast);
@@ -849,6 +875,26 @@ static void lcd_control_motion_menu()
     END_MENU();
 }
 
+static void lcd_control_volumetric_menu()
+{
+	START_MENU();
+	MENU_ITEM(back, MSG_CONTROL, lcd_control_menu);
+
+	MENU_ITEM_EDIT_CALLBACK(bool, MSG_VOLUMETRIC_ENABLED, &volumetric_enabled, calculate_volumetric_multipliers);
+
+	if (volumetric_enabled) {
+		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_0, &filament_size[0], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+#if EXTRUDERS > 1
+		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_1, &filament_size[1], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+#if EXTRUDERS > 2
+		MENU_ITEM_EDIT_CALLBACK(float43, MSG_FILAMENT_SIZE_EXTRUDER_2, &filament_size[2], DEFAULT_NOMINAL_FILAMENT_DIA - .5, DEFAULT_NOMINAL_FILAMENT_DIA + .5, calculate_volumetric_multipliers);
+#endif
+#endif
+	}
+
+	END_MENU();
+}
+
 #ifdef DOGLCD
 static void lcd_set_contrast()
 {
@@ -992,6 +1038,7 @@ void lcd_sdcard_menu()
 menu_edit_type(int, int3, itostr3, 1)
 menu_edit_type(float, float3, ftostr3, 1)
 menu_edit_type(float, float32, ftostr32, 100)
+menu_edit_type(float, float43, ftostr43, 1000)
 menu_edit_type(float, float5, ftostr5, 0.01)
 menu_edit_type(float, float51, ftostr51, 10)
 menu_edit_type(float, float52, ftostr52, 100)
@@ -1067,6 +1114,11 @@ static void menu_action_setting_edit_bool(const char* pstr, bool* ptr)
 {
     *ptr = !(*ptr);
 }
+static void menu_action_setting_edit_callback_bool(const char* pstr, bool* ptr, menuFunc_t callback)
+{
+	menu_action_setting_edit_bool(pstr, ptr);
+	(*callback)();
+}
 #endif//ULTIPANEL
 
 /** LCD API **/
@@ -1075,12 +1127,12 @@ void lcd_init()
     lcd_implementation_init();
 
 #ifdef NEWPANEL
-    pinMode(BTN_EN1,INPUT);
-    pinMode(BTN_EN2,INPUT);
+    SET_INPUT(BTN_EN1);
+    SET_INPUT(BTN_EN2);
     WRITE(BTN_EN1,HIGH);
     WRITE(BTN_EN2,HIGH);
   #if BTN_ENC > 0
-    pinMode(BTN_ENC,INPUT);
+    SET_INPUT(BTN_ENC);
     WRITE(BTN_ENC,HIGH);
   #endif
   #ifdef REPRAPWORLD_KEYPAD
@@ -1461,7 +1513,24 @@ char *ftostr32(const float &x)
   return conv;
 }
 
-// Convert float to string with 1.23 format
+// Convert float to string with 1.234 format
+char *ftostr43(const float &x)
+{
+	long xx = x * 1000;
+    if (xx >= 0)
+		conv[0] = (xx / 1000) % 10 + '0';
+	else
+		conv[0] = '-';
+	xx = abs(xx);
+	conv[1] = '.';
+	conv[2] = (xx / 100) % 10 + '0';
+	conv[3] = (xx / 10) % 10 + '0';
+	conv[4] = (xx) % 10 + '0';
+	conv[5] = 0;
+	return conv;
+}
+
+//Float to string with 1.23 format
 char *ftostr12ns(const float &x)
 {
   long xx=x*100;
@@ -1475,7 +1544,52 @@ char *ftostr12ns(const float &x)
   return conv;
 }
 
-// Convert int to lj string with +123.0 format
+//  convert float to space-padded string with -_23.4_ format
+char *ftostr32sp(const float &x) {
+  long xx = abs(x * 100);
+  uint8_t dig;
+
+  if (x < 0) { // negative val = -_0
+    conv[0] = '-';
+    dig = (xx / 1000) % 10;
+    conv[1] = dig ? '0' + dig : ' ';
+  }
+  else { // positive val = __0
+    dig = (xx / 10000) % 10;
+    if (dig) {
+      conv[0] = '0' + dig;
+      conv[1] = '0' + (xx / 1000) % 10;
+    }
+    else {
+      conv[0] = ' ';
+      dig = (xx / 1000) % 10;
+      conv[1] = dig ? '0' + dig : ' ';
+    }
+  }
+
+  conv[2] = '0' + (xx / 100) % 10; // lsd always
+
+  dig = xx % 10;
+  if (dig) { // 2 decimal places
+    conv[5] = '0' + dig;
+    conv[4] = '0' + (xx / 10) % 10;
+    conv[3] = '.';
+  }
+  else { // 1 or 0 decimal place
+    dig = (xx / 10) % 10;
+    if (dig) {
+      conv[4] = '0' + dig;
+      conv[3] = '.';
+    }
+    else {
+      conv[3] = conv[4] = ' ';
+    }
+    conv[5] = ' ';
+  }
+  conv[6] = '\0';
+  return conv;
+}
+
 char *itostr31(const int &xx)
 {
   conv[0]=(xx>=0)?'+':'-';

Marlin/ultralcd.h

@@ -118,7 +118,9 @@ char *ftostr3(const float &x);
 char *ftostr31ns(const float &x); // float to string without sign character
 char *ftostr31(const float &x);
 char *ftostr32(const float &x);
+char *ftostr43(const float &x);
 char *ftostr12ns(const float &x); 
+char *ftostr32sp(const float &x); // remove zero-padding from ftostr32
 char *ftostr5(const float &x);
 char *ftostr51(const float &x);
 char *ftostr52(const float &x);

Marlin/ultralcd_implementation_hitachi_HD44780.h

@@ -190,7 +190,8 @@ extern volatile uint16_t buttons;  //an extended version of the last checked but
 // 2 wire Non-latching LCD SR from:
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection 
 #elif defined(SR_LCD_2W_NL)
-   
+
+  extern "C" void __cxa_pure_virtual() { while (1); }
   #include <LCD.h>
   #include <LiquidCrystal_SR.h>
   #define LCD_CLASS LiquidCrystal_SR
@@ -198,7 +199,7 @@ extern volatile uint16_t buttons;  //an extended version of the last checked but
 
 #else
   // Standard directly connected LCD implementations
-  #if LANGUAGE_CHOICE == ru
+  #ifdef LANGUAGE_RU
     #include "LiquidCrystalRus.h"
     #define LCD_CLASS LiquidCrystalRus
   #else 
@@ -547,7 +548,7 @@ static void lcd_implementation_status_screen()
 # endif//LCD_WIDTH > 19
     lcd.setCursor(LCD_WIDTH - 8, 1);
     lcd.print('Z');
-    lcd.print(ftostr32(current_position[Z_AXIS] + 0.00001));
+    lcd.print(ftostr32sp(current_position[Z_AXIS] + 0.00001));
 #endif//LCD_HEIGHT > 2
 
 #if LCD_HEIGHT > 3
@@ -692,6 +693,8 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
 #define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_float43(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
@@ -710,6 +713,8 @@ static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, cons
 #define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr43(*(data)))
+#define lcd_implementation_drawmenu_setting_edit_callback_float43(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr43(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
 #define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))

README.md

@@ -1,422 +1,66 @@
-Current Status: Bug Fixing
-===================
-As we are fixing bugs use the development branch: https://github.com/ErikZalm/Marlin/tree/Development
+# Marlin 3D Printer Firmware
+<img align="right" src="Documentation/Logo/Marlin%20Logo%20GitHub.png" />
 
-What bugs are we working on: https://github.com/ErikZalm/Marlin/milestones
+## Marlin 1.1 Release Candidate is now available
+19 September 2015
+Please see the [RC branch](https://github.com/MarlinFirmware/Marlin/tree/RC) of this repository for access to this new pre-release version of the Marlin firmware.
 
-Developer Notes
-===================
+Documentation has moved to [marlinfirmware.org](http://www.marlinfirmware.org).
 
-- There are now 2 branches: The __development__ branch is where new features and code changes will be sorted out. This branch may have untested code in it, so please let us know if you find any bugs. When the __development__ branch has reached a state where it is stable, it will be moved to the __stable__ branch.
+## Release Branch
 
-- We are doing a kind of cleanup in the list of Issues and Pull Requests, the aim is to get to a state where we can certify the code as stable. To get the code tested as widely as possible we require several volunteers with a wide variety of hardware configurations willing to test the firmware and help us to certify it as stable. If you want to help out testing go to this issue and let us know: https://github.com/ErikZalm/Marlin/issues/1209
+The Release branch contains the latest tagged version of Marlin (currently 1.0.2-1 – January 2015). It also includes a version 1.0.1 (December 2014). Any version of Marlin before 1.0.1 (when we started tagging versions) can be collectively referred to as Marlin 1.0.0.
 
-- Before you submit any pull request, we ask that you _PLEASE_ test your code before submission, even if the change seems innocuous. When creating the pull request, please include the hardware you used for testing and a short synopsis of your testing procedure. Untested pull requests are less likely to be merged, as even slight changes create the risk of breaking the main branch.
+## Patches - 1.0.x Branch
 
-- If you have a fix don't open an issue telling about it, but test the code and submit a pull request. Use the __development__ branch when you submit.
+Any patches developed for this family of releases will be found on the [1.0.x branch](https://github.com/MarlinFirmware/Marlin/tree/1.0.x) of this repository.
+
+## This Repository is Not For Feature Development
+
+Development of future versions of Marlin is ongoing. However, to keep issues separate, that effort takes place in a companion [Development Repository](https://github.com/MarlinFirmware/MarlinDev/). Please make all suggestions for future features in that project. Issues raised here should be restricted to errors in the tagged releases.
+
+## Current Status: In Development
+
+Marlin development is being accelerated to catch up with a long list of issues. Check the Issues and Pull Requests links on the right to to see what we are currently working on.
 
-==========================
-Marlin 3D Printer Firmware
-==========================
 [![Coverity Scan Build Status](https://scan.coverity.com/projects/2224/badge.svg)](https://scan.coverity.com/projects/2224)
-[![Travis Build Status](https://travis-ci.org/ErikZalm/Marlin.svg)](https://travis-ci.org/ErikZalm/Marlin)
+[![Travis Build Status](https://travis-ci.org/MarlinFirmware/Marlin.svg)](https://travis-ci.org/MarlinFirmware/Marlin)
 
-Marlin has a GPL license because I believe in open development.
-Please do not use this code in products (3D printers, CNC etc) that are closed source or are crippled by a patent.
+##### [RepRap.org Wiki Page](http://reprap.org/wiki/Marlin)
 
-[![Flattr this git repo](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/ErikZalm/Marlin&title=Marlin&language=&tags=github&category=software)
+## Contact
 
-Quick Information
-===================
-This RepRap firmware is a mashup between <a href="https://github.com/kliment/Sprinter">Sprinter</a>, <a href="https://github.com/simen/grbl/tree">grbl</a> and many original parts.
+__Google Hangout:__ <a href="https://plus.google.com/hangouts/_/gxn3wrea5gdhoo223yimsiforia" target="_blank">. Hangout</a> We have a hangout every 2 weeks. Search the issue list for "Hangout" to determine the time and date of the next event.
 
-Derived from Sprinter and Grbl by Erik van der Zalm.
-Sprinters lead developers are Kliment and caru.
-Grbls lead developer is Simen Svale Skogsrud. Sonney Jeon (Chamnit) improved some parts of grbl
-A fork by bkubicek for the Ultimaker was merged, and further development was aided by him.
-Some features have been added by:
-Lampmaker, Bradley Feldman, and others...
+## Credits
 
+The current Marlin dev team consists of:
 
-Features:
-=========
+ - Scott Lahteine [@thinkyhead] - English
+ - Andreas Hardtung [@AnHardt] - Deutsch, English
+ - [@Wurstnase] - Deutsch, English
+ - [@fmalpartida] - English, Spanish
+ - [@CONSULitAS] - Deutsch, English
+ - [@maverikou]
+ - Chris Palmer [@nophead]
+ - [@paclema]
+ - [@epatel]
+ - Erik van der Zalm [@ErikZalm]
+ - David Braam [@daid]
+ - Bernhard Kubicek [@bkubicek]
+ - Richard Wackerbarth [@Wackerbarth] - English
+ - Roxanne Neufeld [@Roxy-3DPrintBoard] - English
 
-*   Interrupt based movement with real linear acceleration
-*   High steprate
-*   Look ahead (Keep the speed high when possible. High cornering speed)
-*   Interrupt based temperature protection
-*   preliminary support for Matthew Roberts advance algorithm
-    For more info see: http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
-*   Full endstop support
-*   SD Card support
-*   SD Card folders (works in pronterface)
-*   SD Card autostart support
-*   LCD support (ideally 20x4)
-*   LCD menu system for autonomous SD card printing, controlled by an click-encoder.
-*   EEPROM storage of e.g. max-velocity, max-acceleration, and similar variables
-*   many small but handy things originating from bkubicek's fork.
-*   Arc support
-*   Temperature oversampling
-*   Dynamic Temperature setpointing aka "AutoTemp"
-*   Support for QTMarlin, a very beta GUI for PID-tuning and velocity-acceleration testing. https://github.com/bkubicek/QTMarlin
-*   Endstop trigger reporting to the host software.
-*   Updated sdcardlib
-*   Heater power reporting. Useful for PID monitoring.
-*   PID tuning
-*   CoreXY kinematics (www.corexy.com/theory.html)
-*   Delta kinematics
-*   SCARA kinematics
-*   Dual X-carriage support for multiple extruder systems
-*   Configurable serial port to support connection of wireless adaptors.
-*   Automatic operation of extruder/cold-end cooling fans based on nozzle temperature
-*   RC Servo Support, specify angle or duration for continuous rotation servos.
-*   Bed Auto Leveling.
-*   Support for a filament diameter sensor, which adjusts extrusion volume
+More features have been added by:
+  - Alberto Cotronei [@MagoKimbra]
+  - Lampmaker,
+  - Bradley Feldman,
+  - and others...
 
-The default baudrate is 250000. This baudrate has less jitter and hence errors than the usual 115200 baud, but is less supported by drivers and host-environments.
+## License
 
+Marlin is published under the [GPL license](/COPYING.md) because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.
 
-Differences and additions to the already good Sprinter firmware:
-================================================================
-
-Look-ahead:
------------
-
-Marlin has look-ahead. While sprinter has to break and re-accelerate at each corner,
-lookahead will only decelerate and accelerate to a velocity,
-so that the change in vectorial velocity magnitude is less than the xy_jerk_velocity.
-This is only possible, if some future moves are already processed, hence the name.
-It leads to less over-deposition at corners, especially at flat angles.
-
-Arc support:
-------------
-
-Slic3r can find curves that, although broken into segments, were ment to describe an arc.
-Marlin is able to print those arcs. The advantage is the firmware can choose the resolution,
-and can perform the arc with nearly constant velocity, resulting in a nice finish.
-Also, less serial communication is needed.
-
-Temperature Oversampling:
--------------------------
-
-To reduce noise and make the PID-differential term more useful, 16 ADC conversion results are averaged.
-
-AutoTemp:
----------
-
-If your gcode contains a wide spread of extruder velocities, or you realtime change the building speed, the temperature should be changed accordingly.
-Usually, higher speed requires higher temperature.
-This can now be performed by the AutoTemp function
-By calling M109 S<mintemp> B<maxtemp> F<factor> you enter the autotemp mode.
-
-You can leave it by calling M109 without any F.
-If active, the maximal extruder stepper rate of all buffered moves will be calculated, and named "maxerate" [steps/sec].
-The wanted temperature then will be set to t=tempmin+factor*maxerate, while being limited between tempmin and tempmax.
-If the target temperature is set manually or by gcode to a value less then tempmin, it will be kept without change.
-Ideally, your gcode can be completely free of temperature controls, apart from a M109 S T F in the start.gcode, and a M109 S0 in the end.gcode.
-
-EEPROM:
--------
-
-If you know your PID values, the acceleration and max-velocities of your unique machine, you can set them, and finally store them in the EEPROM.
-After each reboot, it will magically load them from EEPROM, independent what your Configuration.h says.
-
-LCD Menu:
----------
-
-If your hardware supports it, you can build yourself a LCD-CardReader+Click+encoder combination. It will enable you to realtime tune temperatures,
-accelerations, velocities, flow rates, select and print files from the SD card, preheat, disable the steppers, and do other fancy stuff.
-One working hardware is documented here: http://www.thingiverse.com/thing:12663
-Also, with just a 20x4 or 16x2 display, useful data is shown.
-
-SD card folders:
-----------------
-
-If you have an SD card reader attached to your controller, also folders work now. Listing the files in pronterface will show "/path/subpath/file.g".
-You can write to file in a subfolder by specifying a similar text using small letters in the path.
-Also, backup copies of various operating systems are hidden, as well as files not ending with ".g".
-
-SD card folders:
-----------------
-
-If you place a file auto[0-9].g into the root of the sd card, it will be automatically executed if you boot the printer. The same file will be executed by selecting "Autostart" from the menu.
-First *0 will be performed, than *1 and so on. That way, you can heat up or even print automatically without user interaction.
-
-Endstop trigger reporting:
---------------------------
-
-If an endstop is hit while moving towards the endstop, the location at which the firmware thinks that the endstop was triggered is outputed on the serial port.
-This is useful, because the user gets a warning message.
-However, also tools like QTMarlin can use this for finding acceptable combinations of velocity+acceleration.
-
-Coding paradigm:
-----------------
-
-Not relevant from a user side, but Marlin was split into thematic junks, and has tried to partially enforced private variables.
-This is intended to make it clearer, what interacts which what, and leads to a higher level of modularization.
-We think that this is a useful prestep for porting this firmware to e.g. an ARM platform in the future.
-A lot of RAM (with enabled LCD ~2200 bytes) was saved by storing char []="some message" in Program memory.
-In the serial communication, a #define based level of abstraction was enforced, so that it is clear that
-some transfer is information (usually beginning with "echo:"), an error "error:", or just normal protocol,
-necessary for backwards compatibility.
-
-Interrupt based temperature measurements:
------------------------------------------
-
-An interrupt is used to manage ADC conversions, and enforce checking for critical temperatures.
-This leads to less blocking in the heater management routine.
-
-Implemented G Codes:
-====================
-
-*  G0  -> G1
-*  G1  - Coordinated Movement X Y Z E
-*  G2  - CW ARC
-*  G3  - CCW ARC
-*  G4  - Dwell S<seconds> or P<milliseconds>
-*  G10 - retract filament according to settings of M207
-*  G11 - retract recover filament according to settings of M208
-*  G28 - Home all Axis
-*  G29 - Detailed Z-Probe, probes the bed at 3 points.  You must de at the home position for this to work correctly.
-*  G30 - Single Z Probe, probes bed at current XY location.
-*  G31 - Dock Z Probe sled (if enabled)
-*  G32 - Undock Z Probe sled (if enabled)
-*  G90 - Use Absolute Coordinates
-*  G91 - Use Relative Coordinates
-*  G92 - Set current position to cordinates given
-
-M Codes
-*  M0   - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
-*  M1   - Same as M0
-*  M17  - Enable/Power all stepper motors
-*  M18  - Disable all stepper motors; same as M84
-*  M20  - List SD card
-*  M21  - Init SD card
-*  M22  - Release SD card
-*  M23  - Select SD file (M23 filename.g)
-*  M24  - Start/resume SD print
-*  M25  - Pause SD print
-*  M26  - Set SD position in bytes (M26 S12345)
-*  M27  - Report SD print status
-*  M28  - Start SD write (M28 filename.g)
-*  M29  - Stop SD write
-*  M30  - Delete file from SD (M30 filename.g)
-*  M31  - Output time since last M109 or SD card start to serial
-*  M32  - Select file and start SD print (Can be used when printing from SD card)
-*  M42  - Change pin status via gcode Use M42 Px Sy to set pin x to value y, when omitting Px the onboard led will be used.
-*  M80  - Turn on Power Supply
-*  M81  - Turn off Power Supply
-*  M82  - Set E codes absolute (default)
-*  M83  - Set E codes relative while in Absolute Coordinates (G90) mode
-*  M84  - Disable steppers until next move, or use S<seconds> to specify an inactivity timeout, after which the steppers will be disabled.  S0 to disable the timeout.
-*  M85  - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
-*  M92  - Set axis_steps_per_unit - same syntax as G92
-*  M104 - Set extruder target temp
-*  M105 - Read current temp
-*  M106 - Fan on
-*  M107 - Fan off
-*  M109 - Sxxx Wait for extruder current temp to reach target temp. Waits only when heating
-*         Rxxx Wait for extruder current temp to reach target temp. Waits when heating and cooling
-*  M112 - Emergency stop
-*  M114 - Output current position to serial port
-*  M115 - Capabilities string
-*  M117 - display message
-*  M119 - Output Endstop status to serial port
-*  M126 - Solenoid Air Valve Open (BariCUDA support by jmil)
-*  M127 - Solenoid Air Valve Closed (BariCUDA vent to atmospheric pressure by jmil)
-*  M128 - EtoP Open (BariCUDA EtoP = electricity to air pressure transducer by jmil)
-*  M129 - EtoP Closed (BariCUDA EtoP = electricity to air pressure transducer by jmil)
-*  M140 - Set bed target temp
-*  M190 - Sxxx Wait for bed current temp to reach target temp. Waits only when heating
-*         Rxxx Wait for bed current temp to reach target temp. Waits when heating and cooling
-*  M200 D<millimeters>- set filament diameter and set E axis units to cubic millimeters (use S0 to set back to millimeters).
-*  M201 - Set max acceleration in units/s^2 for print moves (M201 X1000 Y1000)
-*  M202 - Set max acceleration in units/s^2 for travel moves (M202 X1000 Y1000) Unused in Marlin!!
-*  M203 - Set maximum feedrate that your machine can sustain (M203 X200 Y200 Z300 E10000) in mm/sec
-*  M204 - Set default acceleration: S normal moves T filament only moves (M204 S3000 T7000) im mm/sec^2  also sets minimum segment time in ms (B20000) to prevent buffer underruns and M20 minimum feedrate
-*  M205 -  advanced settings:  minimum travel speed S=while printing T=travel only,  B=minimum segment time X= maximum xy jerk, Z=maximum Z jerk, E=maximum E jerk
-*  M206 - set additional homeing offset
-*  M207 - set retract length S[positive mm] F[feedrate mm/min] Z[additional zlift/hop], stays in mm regardless of M200 setting
-*  M208 - set recover=unretract length S[positive mm surplus to the M207 S*] F[feedrate mm/min]
-*  M209 - S<1=true/0=false> enable automatic retract detect if the slicer did not support G10/11: every normal extrude-only move will be classified as retract depending on the direction.
-*  M218 - set hotend offset (in mm): T<extruder_number> X<offset_on_X> Y<offset_on_Y>
-*  M220 S<factor in percent>- set speed factor override percentage
-*  M221 S<factor in percent>- set extrude factor override percentage
-*  M240 - Trigger a camera to take a photograph
-*  M280 - Position an RC Servo P<index> S<angle/microseconds>, ommit S to report back current angle
-*  M300 - Play beepsound S<frequency Hz> P<duration ms>
-*  M301 - Set PID parameters P I and D
-*  M302 - Allow cold extrudes
-*  M303 - PID relay autotune S<temperature> sets the target temperature. (default target temperature = 150C)
-*  M304 - Set bed PID parameters P I and D
-*  M400 - Finish all moves
-*  M401 - Lower z-probe if present
-*  M402 - Raise z-probe if present
-*  M404 - N<dia in mm> Enter the nominal filament width (3mm, 1.75mm ) or will display nominal filament width without parameters
-*  M405 - Turn on Filament Sensor extrusion control.  Optional D<delay in cm> to set delay in centimeters between sensor and extruder
-*  M406 - Turn off Filament Sensor extrusion control
-*  M407 - Displays measured filament diameter
-*  M500 - stores paramters in EEPROM
-*  M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
-*  M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
-*  M503 - print the current settings (from memory not from eeprom)
-*  M540 - Use S[0|1] to enable or disable the stop SD card print on endstop hit (requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED)
-*  M600 - Pause for filament change X[pos] Y[pos] Z[relative lift] E[initial retract] L[later retract distance for removal]
-*  M907 - Set digital trimpot motor current using axis codes.
-*  M908 - Control digital trimpot directly.
-*  M350 - Set microstepping mode.
-*  M351 - Toggle MS1 MS2 pins directly.
-*  M928 - Start SD logging (M928 filename.g) - ended by M29
-*  M999 - Restart after being stopped by error
-
-
-Configuring and compilation:
-============================
-
-Install the arduino software IDE/toolset v23 (Some configurations also work with 1.x.x)
-   http://www.arduino.cc/en/Main/Software
-
-Download the Marlin firmware
-   https://github.com/ErikZalm/Marlin/tree/Marlin_v1
-   Use the "Download Zip" button on the right.
-
-For gen6/gen7 and sanguinololu the Sanguino directory in the Marlin dir needs to be copied to the arduino environment.
-  copy ArduinoAddons\Arduino_x.x.x\sanguino <arduino home>\hardware\Sanguino
-
-Start the arduino IDE.
-Select Tools -> Board -> Arduino Mega 2560    or your microcontroller
-Select the correct serial port in Tools ->Serial Port
-Open Marlin.pde
-
-Click the Verify/Compile button
-
-Click the Upload button
-If all goes well the firmware is uploading
-
-That's ok.  Enjoy Silky Smooth Printing.
-
-===============================================
-Instructions for configuring Bed Auto Leveling
-===============================================
-There are two options for this feature. You may choose to use a servo mounted on the X carriage or you may use a sled that mounts on the X axis and can be docked when not in use.
-See the section for each option below for specifics about installation and configuration. Also included are instructions that apply to both options.
-
-Note for RAMPS users:
----------------------
-
-By default, RAMPS have no power on servo bus (if you happen to have a multimeter, check the voltage on servo power pins).
-In order to get the servo working, you need to supply 5V to 5V pin.. You can do it using your power supply (if it has a 5V output) or jumping the "Vcc" from Arduino to the 5V RAMPS rail.
-These 2 pins are located just between the Reset Button and the yellow fuses... There are marks in the board showing 5V and VCC.. just connect them..
-If jumping the arduino Vcc do RAMPS 5V rail, take care to not use a power hungry servo, otherwise you will cause a blackout in the arduino board ;-)
-
-Instructions for Both Options
------------------------------
-
-Uncomment the "ENABLE_AUTO_BED_LEVELING" define (commented by default)
-
-The following options define the probing positions. These are good starting values.
-I recommend to keep a better clearance from borders in the first run and then make the probes as close as possible to borders:
-
-* \#define LEFT_PROBE_BED_POSITION 30
-* \#define RIGHT_PROBE_BED_POSITION 140
-* \#define BACK_PROBE_BED_POSITION 140
-* \#define FRONT_PROBE_BED_POSITION 30
-
-A few more options:
-
-* \#define XY_TRAVEL_SPEED 6000
-
-X and Y axis travel speed between probes, in mm/min.
-Bear in mind that really fast moves may render step skipping. 6000 mm/min (100mm/s) is a good value.
-
-* \#define Z_RAISE_BEFORE_PROBING 10
-* \#define Z_RAISE_BETWEEN_PROBINGS 10
-
-The Z axis is lifted when traveling to the first probe point by Z_RAISE_BEFORE_PROBING value
-and then lifted when traveling from first to second and second to third point by Z_RAISE_BETWEEN_PROBINGS.
-All values are in mm as usual.
-
-Servo Option Notes
-------------------
-You will probably need a swivel Z-MIN endstop in the extruder. A rc servo do a great job.
-Check the system working here: http://www.youtube.com/watch?v=3IKMeOYz-1Q (Enable English subtitles)
-Teasing ;-) video: http://www.youtube.com/watch?v=x8eqSQNAyro
-
-In order to get the servo working, you need to enable:
-
-* \#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
-
-* \#define SERVO_ENDSTOPS {-1, -1, 0} // Servo index for X, Y, Z. Disable with -1
-
-* \#define SERVO_ENDSTOP_ANGLES {0,0, 0,0, 165,60} // X,Y,Z Axis Extend and Retract angles
-
-The first define tells firmware how many servos you have.
-The second tells what axis this servo will be attached to. In the example above, we have a servo in Z axis.
-The third one tells the angle in 2 situations: Probing (165º) and resting (60º). Check this with command M280 P0 S{angle} (example: M280 P0 S60 moves the servo to 60º)
-
-Next you need to define the Z endstop (probe) offset from hotend.
-My preferred method:
-
-* a) Make a small mark in the bed with a marker/felt-tip pen.
-* b) Place the hotend tip as *exactly* as possible on the mark, touching the bed. Raise the hotend 0.1mm (a regular paper thickness) and zero all axis (G92 X0 Y0 Z0);
-* d) Raise the hotend 10mm (or more) for probe clearance, lower the Z probe (Z-Endstop) with M401 and place it just on that mark by moving X, Y and Z;
-* e) Lower the Z in 0.1mm steps, with the probe always touching the mark (it may be necessary to adjust X and Y as well) until you hear the "click" meaning the mechanical endstop was trigged. You can confirm with M119;
-* f) Now you have the probe in the same place as your hotend tip was before. Perform a M114 and write down the values, for example: X:24.3 Y:-31.4 Z:5.1;
-* g) You can raise the z probe with M402 command;
-* h) Fill the defines bellow multiplying the values by "-1" (just change the signal)
-
-
-* \#define X_PROBE_OFFSET_FROM_EXTRUDER -24.3
-* \#define Y_PROBE_OFFSET_FROM_EXTRUDER 31.4
-* \#define Z_PROBE_OFFSET_FROM_EXTRUDER -5.1
-
-
-Sled Option Notes
------------------
-The sled option uses an electromagnet to attach and detach to/from the X carriage. See http://www.thingiverse.com/thing:396692 for more details on how to print and install this feature. It uses the same connections as the servo option.
-
-To use the sled option, you must define two additional things in Configuration.h:
-
-* \#define Z_PROBE_SLED
-* \#define SLED_DOCKING_OFFSET 5
-
-Uncomment the Z_PROBE_SLED to define to enable the sled (commented out by default).
-
-Uncomment the SLED_DOCKING_OFFSET to set the extra distance the X axis must travel to dock the sled. This value can be found by moving the X axis to its maximum position then measure the distance to the right X end and subtract the width of the sled (23mm if you printed the sled from Thingiverse).
-
-Next you need to define the Z endstop (probe) offset from hotend.
-My preferred method:
-
-* a) Home the X and Y axes.
-* b) Move the X axis to about the center of the print bed. Make a mark on the print bed.
-* c) Move the Y axis to the maximum position. Make another mark.
-* d) Home the X axis and use a straight edge to make a line between the two points.
-* e) Repeat (b)-(d) reversing the X and Y. When you are done you will have two lines on the print bed. We will use these to measure the offset for the Z probe endstop.
-* f) Move the nozzle so that it is positioned on the center point of the two lines. You can use fine movement of 0.1mm to get it as close as possible. Note the position of X and Y.
-* g) Zero the Z axis with the G92 Z0 command.
-* h) Raise the Z axis about 20mmm.
-* i) Use the G32 command to retrieve the sled.
-* j) Now more the X and Y axis to the position recorded in (f).
-* k) Lower the Z axis in 0.1mm steps until you hear the "click" meaning the mechanical endstop was trigged. You can confirm with the M119 command. Note the position of the Z axis.
-* l) Make a mark on the print bed where the endstop lever has touched the print bed. Raise the Z-axis about 30mm to give yourself some room.
-* m) Now measure the distance from the center point to the endstop impact site along the X and Y axis using the lines drawn previously.
-* n) Fill in the values below. If the endstop mark is in front of the line running left-to-right, use positive values. If it is behind, use negative values. For the Z axis use the value from (k) and subtract 0.1mm.
-
-For example, suppose you measured the endstop position and it was 20mm to the right of the line running front-to-back, 10mm toward the front of the line running left-to-right, and the value from (k) was 2.85. The values for the defines would be:
-
-* \#define X_PROBE_OFFSET_FROM_EXTRUDER 20
-* \#define Y_PROBE_OFFSET_FROM_EXTRUDER 10
-* \#define Z_PROBE_OFFSET_FROM_EXTRUDER 2.75
-
-That's it.. enjoy never having to calibrate your Z endstop neither leveling your bed by hand anymore ;-)
-
-Filament Sensor
----------------
-Supports the use of a real time filament diameter sensor that measures the diameter of the filament going into the extruder and then adjusts the extrusion rate to compensate for filament that does not match what is defined in the g-code.  The diameter can also be displayed on the LCD screen. This potentially eliminates the need to measure filament diameter when changing spools of filament. Gcode becomes independent of the filament diameter. Can also compensate for changing diameter.
-
-For examples of these sensors, see: http://www.thingiverse.com/thing:454584, https://www.youmagine.com/designs/filament-diameter-sensor, http://diy3dprinting.blogspot.com/2014/01/diy-filament-diameter-sensor.html. Any sensor which produces a voltage equivalent to the diameter in mm (i.e. 1v = 1mm) can be used. This provides a very simple interface and may encourage more innovation in this area.
-
-4 new Mcodes are defined to set relevant parameters: M404, M405, M406, M407 - see above.
-
- Implements a delay buffer to handle the transit delay between where the filament is measured and when it gets to the extruder.
+While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.
 
+[![Flattr this git repo](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)