🔨 Specify versions in INI

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

.github/workflows/test-builds.yml

@@ -1,147 +0,0 @@
-#
-# test-builds.yml
-# Do test builds to catch compile errors
-#
-
-name: CI - bugfix-2.0.x
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-
-jobs:
-  test_builds:
-    name: Run All Tests
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    strategy:
-      matrix:
-        test-platform:
-        # Base Environments
-
-        - DUE
-        - DUE_archim
-        - esp32
-        - linux_native
-        - mega2560
-        - at90usb1286_dfu
-        - teensy31
-        - teensy35
-        - teensy41
-        - SAMD51_grandcentral_m4
-
-        # Extended AVR Environments
-
-        - FYSETC_F6
-        - mega1280
-        - rambo
-        - sanguino1284p
-        - sanguino644p
-
-        # STM32F1 (Maple) Environments
-
-        #- STM32F103RC_btt_maple
-        - STM32F103RC_btt_USB_maple
-        - STM32F103RC_fysetc_maple
-        - STM32F103RC_meeb_maple
-        - jgaurora_a5s_a1_maple
-        - STM32F103VE_longer_maple
-        #- mks_robin_maple
-        - mks_robin_lite_maple
-        - mks_robin_pro_maple
-        #- mks_robin_nano35_maple
-        #- STM32F103RE_creality_maple
-        - STM32F103VE_ZM3E4V2_USB_maple
-
-        # STM32 (ST) Environments
-
-        - STM32F103RC_btt
-        #- STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
-        - STM32F103RE_creality
-        - STM32F401RC_creality
-        - STM32F103VE_longer
-        - STM32F407VE_black
-        - STM32F401VE_STEVAL
-        - BIGTREE_BTT002
-        - BIGTREE_SKR_PRO
-        - BIGTREE_GTR_V1_0
-        - mks_robin
-        - ARMED
-        - FYSETC_S6
-        - STM32F070CB_malyan
-        - STM32F070RB_malyan
-        - malyan_M300
-        - FLYF407ZG
-        - rumba32
-        - LERDGEX
-        - LERDGEK
-        - mks_robin_nano35
-        - NUCLEO_F767ZI
-        - REMRAM_V1
-        - BTT_SKR_SE_BX
-        - chitu_f103
-        - Opulo_Lumen_REV3
-
-        # Put lengthy tests last
-
-        - LPC1768
-        - LPC1769
-
-        # Non-working environment tests
-        #- at90usb1286_cdc
-        #- STM32F103CB_malyan
-        #- STM32F103RE
-        #- mks_robin_mini
-
-    steps:
-
-    - name: Check out the PR
-      uses: actions/checkout@v3
-
-    - name: Cache pip
-      uses: actions/cache@v3
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
-
-    - name: Cache PlatformIO
-      uses: actions/cache@v3
-      with:
-        path: ~/.platformio
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
-
-    - name: Select Python 3.7
-      uses: actions/setup-python@v3
-      with:
-        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
-        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
-
-    - name: Install PlatformIO
-      run: |
-        pip install -U platformio
-        pio upgrade --dev
-        pio pkg update --global
-
-    - name: Run ${{ matrix.test-platform }} Tests
-      run: |
-        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}

Marlin/Version.h

@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+//#define SHORT_BUILD_VERSION "2.0.9.8"
 
 /**
  * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2023-04-16"
+//#define STRING_DISTRIBUTION_DATE "2023-12-08"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/gcode/feature/digipot/M907-M910.cpp

@@ -108,7 +108,7 @@ void GcodeSuite::M907() {
     // Additional extruders use B,C,D.
     // TODO: Change these parameters because 'E' is used and because 'D' should be reserved for debugging. B<index>?
     #if E_STEPPERS >= 2
-      for (uint8_t i = E_AXIS + 1; i <= _MIN(DIGIPOT_I2C_NUM_CHANNELS - 1, E_AXIS + 3); i++) // Up to B=E1 C=E2 D=E3
+      for (uint8_t i = E_AXIS + 1; i < _MAX(DIGIPOT_I2C_NUM_CHANNELS, (NUM_AXES + 3)); i++)
         if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c.set_current(i, parser.value_float());
     #endif
   #endif

Marlin/src/gcode/motion/G2_G3.cpp

@@ -269,7 +269,7 @@ void plan_arc(
     // d) allows the print head to stop in the remining length of the curve within all configured maximum accelerations.
     // The last has to be calculated every time through the loop.
     const float limiting_accel = _MIN(planner.settings.max_acceleration_mm_per_s2[axis_p], planner.settings.max_acceleration_mm_per_s2[axis_q]),
-                limiting_speed = _MIN(planner.settings.max_feedrate_mm_s[axis_p], planner.settings.max_acceleration_mm_per_s2[axis_q]),
+                limiting_speed = _MIN(planner.settings.max_feedrate_mm_s[axis_p], planner.settings.max_feedrate_mm_s[axis_q]),
                 limiting_speed_sqr = _MIN(sq(limiting_speed), limiting_accel * radius, sq(scaled_fr_mm_s));
     float arc_mm_remaining = flat_mm;
 

Marlin/src/inc/Version.h

@@ -25,7 +25,7 @@
  * Release version. Leave the Marlin version or apply a custom scheme.
  */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "bugfix-2.0.x"
+  #define SHORT_BUILD_VERSION "2.0.9.8"
 #endif
 
 /**
@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2023-04-16"
+  #define STRING_DISTRIBUTION_DATE "2023-12-08"
 #endif
 
 /**

Marlin/src/pins/pins.h

@@ -702,7 +702,7 @@
 #elif MB(ARTILLERY_RUBY)
   #include "stm32f4/pins_ARTILLERY_RUBY.h"      // STM32F4                                env:Artillery_Ruby
 #elif MB(CREALITY_V24S1_301F4)
-  #include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4                               env:STM32F401RC_creality env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
+  #include "stm32f4/pins_CREALITY_V24S1_301F4.h" // STM32F4                               env:STM32F401RC_creality env:STM32F401RC_creality_nobootloader env:STM32F401RC_creality_jlink env:STM32F401RC_creality_stlink
 
 //
 // ARM Cortex M7

README.md

@@ -15,14 +15,10 @@
 Additional documentation can be found at the [Marlin Home Page](https://marlinfw.org/).
 Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by!
 
-## Marlin 2.0 Bugfix Branch
-
-__Not for production use. Use with caution!__
+## Marlin 2.0
 
 Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.
 
-This branch is for patches to the latest 2.0.x release version. Periodically this branch will form the basis for the next minor 2.0.x release.
-
 Download earlier versions of Marlin on the [Releases page](https://github.com/MarlinFirmware/Marlin/releases).
 
 ## Example Configurations
@@ -31,11 +27,10 @@ Before building Marlin you'll need to configure it for your specific hardware. Y
 
 ## Building Marlin 2.0
 
-To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](https://docs.platformio.org/en/latest/ide.html#platformio-ide). We've posted detailed instructions on [Building Marlin with Arduino](https://marlinfw.org/docs/basics/install_arduino.html) and [Building Marlin with PlatformIO for ReArm](https://marlinfw.org/docs/basics/install_rearm.html) (which applies well to other 32-bit boards).
+To build Marlin 2.0 you'll need [Arduino IDE 1.8.8 or newer](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). Detailed build and install instructions are posted at:
 
-## Hardware Abstraction Layer (HAL)
-
-Marlin 2.0 introduces a layer of abstraction so that all the existing high-level code can be built for 32-bit platforms while still retaining full 8-bit AVR compatibility. Retaining AVR compatibility and a single code-base is important to us, because we want to make sure that features and patches get as much testing and attention as possible, and that all platforms always benefit from the latest improvements.
+  - [Installing Marlin (Arduino)](http://marlinfw.org/docs/basics/install_arduino.html)
+  - [Installing Marlin (VSCode)](http://marlinfw.org/docs/basics/install_platformio_vscode.html).
 
 ### Supported Platforms
 
@@ -57,18 +52,11 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
   [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|ARM® Cortex-M7|
   Linux Native|x86/ARM/etc.|Raspberry Pi
 
-## Submitting Patches
+## Submitting Changes
 
-Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
-
-- This branch is for fixing bugs and integrating any new features for the duration of the Marlin 2.0.x life-cycle.
-- Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
-- Please submit Feature Requests and Bug Reports to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues/new/choose). Support resources are also listed there.
-- Whenever you add new features, be sure to add tests to `buildroot/tests` and then run your tests locally, if possible.
-  - It's optional: Running all the tests on Windows might take a long time, and they will run anyway on GitHub.
-  - If you're running the tests on Linux (or on WSL with the code on a Linux volume) the speed is much faster.
-  - You can use `make tests-all-local` or `make tests-single-local TEST_TARGET=...`.
-  - If you prefer Docker you can use `make tests-all-local-docker` or `make tests-all-local-docker TEST_TARGET=...`.
+- Submit **Bug Fixes** as Pull Requests to the ([bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x)) branch.
+- Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) to gain points with the maintainers.
+- Please submit your questions and concerns to the [Issue Queue](https://github.com/MarlinFirmware/Marlin/issues).
 
 ## Marlin Support
 

buildroot/bin/use_example_configs

@@ -5,7 +5,7 @@
 # Examples:
 #   use_example_configs
 #   use_example_configs Creality/CR-10/CrealityV1
-#   use_example_configs release-2.0.9.4:Creality/CR-10/CrealityV1
+#   use_example_configs release-2.0.9.7:Creality/CR-10/CrealityV1
 #
 # If a configpath has spaces (or quotes) escape them or enquote the path
 #

buildroot/share/PlatformIO/scripts/chitu_crypt.py

@@ -4,9 +4,9 @@
 #
 import pioutil
 if pioutil.is_pio_build():
-    import struct,uuid,marlin
-
-    board = marlin.env.BoardConfig()
+    import os,random,struct,uuid,marlin
+    # Relocate firmware from 0x08000000 to 0x08008800
+    marlin.relocate_firmware("0x08008800")
 
     def calculate_crc(contents, seed):
         accumulating_xor_value = seed;
@@ -105,22 +105,13 @@ if pioutil.is_pio_build():
 
     # Encrypt ${PROGNAME}.bin and save it as 'update.cbd'
     def encrypt(source, target, env):
-        from pathlib import Path
+        firmware = open(target[0].path, "rb")
+        update = open(target[0].dir.path + '/update.cbd', "wb")
+        length = os.path.getsize(target[0].path)
 
-        fwpath = Path(target[0].path)
-        fwsize = fwpath.stat().st_size
+        encrypt_file(firmware, update, length)
 
-        enname = board.get("build.crypt_chitu")
-        enpath = Path(target[0].dir.path)
+        firmware.close()
+        update.close()
 
-        fwfile = fwpath.open("rb")
-        enfile = (enpath / enname).open("wb")
-
-        print(f"Encrypting {fwpath} to {enname}")
-        encrypt_file(fwfile, enfile, fwsize)
-        fwfile.close()
-        enfile.close()
-        fwpath.unlink()
-
-    marlin.relocate_firmware("0x08008800")
     marlin.add_post_action(encrypt);

buildroot/share/PlatformIO/scripts/common-dependencies.py

@@ -60,7 +60,7 @@ if pioutil.is_pio_build():
         for line in atoms:
             parts = line.split('=')
             name = parts.pop(0)
-            if name in ['build_flags', 'extra_scripts', 'src_filter', 'lib_ignore']:
+            if name in ['build_flags', 'extra_scripts', 'build_src_filter', 'lib_ignore']:
                 feat[name] = '='.join(parts)
                 blab("[%s] %s=%s" % (feature, name, feat[name]), 3)
             else:
@@ -172,19 +172,19 @@ if pioutil.is_pio_build():
                 blab("Running extra_scripts for %s... " % feature, 2)
                 env.SConscript(feat['extra_scripts'], exports="env")
 
-            if 'src_filter' in feat:
+            if 'build_src_filter' in feat:
                 blab("========== Adding build_src_filter for %s... " % feature, 2)
-                src_filter = ' '.join(env.GetProjectOption('src_filter'))
+                build_src_filter = ' '.join(env.GetProjectOption('build_src_filter'))
                 # first we need to remove the references to the same folder
-                my_srcs = re.findall(r'[+-](<.*?>)', feat['src_filter'])
-                cur_srcs = re.findall(r'[+-](<.*?>)', src_filter)
+                my_srcs = re.findall(r'[+-](<.*?>)', feat['build_src_filter'])
+                cur_srcs = re.findall(r'[+-](<.*?>)', build_src_filter)
                 for d in my_srcs:
                     if d in cur_srcs:
-                        src_filter = re.sub(r'[+-]' + d, '', src_filter)
+                        build_src_filter = re.sub(r'[+-]' + d, '', build_src_filter)
 
-                src_filter = feat['src_filter'] + ' ' + src_filter
-                set_env_field('build_src_filter', [src_filter])
-                env.Replace(SRC_FILTER=src_filter)
+                build_src_filter = feat['build_src_filter'] + ' ' + build_src_filter
+                set_env_field('build_src_filter', [build_src_filter])
+                env.Replace(SRC_FILTER=build_src_filter)
 
             if 'lib_ignore' in feat:
                 blab("========== Adding lib_ignore for %s... " % feature, 2)

buildroot/share/PlatformIO/scripts/marlin.py

@@ -16,7 +16,8 @@ def copytree(src, dst, symlinks=False, ignore=None):
             shutil.copy2(item, dst / item.name)
 
 def replace_define(field, value):
-    for define in env['CPPDEFINES']:
+    envdefs = env['CPPDEFINES'].copy()
+    for define in envdefs:
         if define[0] == field:
             env['CPPDEFINES'].remove(define)
     env['CPPDEFINES'].append((field, value))

buildroot/share/PlatformIO/scripts/preflight-checks.py

@@ -129,8 +129,10 @@ if pioutil.is_pio_build():
         #
         if 'FILAMENT_RUNOUT_SENSOR' in env['MARLIN_FEATURES'] and 'NUM_RUNOUT_SENSORS' in env['MARLIN_FEATURES']:
             if env['MARLIN_FEATURES']['NUM_RUNOUT_SENSORS'].isdigit() and int(env['MARLIN_FEATURES']['NUM_RUNOUT_SENSORS']) > 1:
-                if 'FILAMENT_RUNOUT_SCRIPT' in env['MARLIN_FEATURES'] and "%c" not in env['MARLIN_FEATURES']['FILAMENT_RUNOUT_SCRIPT']:
-                    err = "ERROR: FILAMENT_RUNOUT_SCRIPT needs a %c parameter (e.g., 'M600 T%c') when NUM_RUNOUT_SENSORS is > 1."
+                if 'FILAMENT_RUNOUT_SCRIPT' in env['MARLIN_FEATURES']:
+                    frs = env['MARLIN_FEATURES']['FILAMENT_RUNOUT_SCRIPT']
+                    if "M600" in frs and "%c" not in frs:
+                        err = "ERROR: FILAMENT_RUNOUT_SCRIPT needs a %c parameter (e.g., \"M600 T%c\") when NUM_RUNOUT_SENSORS is > 1"
                         raise SystemExit(err)
 
     sanity_check_target()

config/README.md

@@ -1,9 +1,3 @@
 # Where have all the configurations gone?
 
-Marlin configurations for specific machines are now maintained in their own repository at:
-
-## https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.0.x
-
-Configuration files for use with the nightly `bugfix-2.0.x` branch can be downloaded from:
-
-## https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.0.x.zip
+## https://github.com/MarlinFirmware/Configurations/archive/release-2.0.9.7.zip

ini/features.ini

@@ -11,233 +11,233 @@
 
 [features]
 YHCB2004                               = red-scorp/LiquidCrystal_AIP31068@^1.0.4, red-scorp/SoftSPIB@^1.1.1
-HAS_TFT_LVGL_UI                        = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
-                                         src_filter=+<src/lcd/extui/mks_ui>
+HAS_TFT_LVGL_UI                        = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/a3ebe98bc6.zip
+                                         build_src_filter=+<src/lcd/extui/mks_ui>
                                          extra_scripts=download_mks_assets.py
-POSTMORTEM_DEBUGGING                   = src_filter=+<src/HAL/shared/cpu_exception> +<src/HAL/shared/backtrace>
+POSTMORTEM_DEBUGGING                   = build_src_filter=+<src/HAL/shared/cpu_exception> +<src/HAL/shared/backtrace>
                                          build_flags=-funwind-tables
-MKS_WIFI_MODULE                        = QRCode=https://github.com/makerbase-mks/QRCode/archive/master.zip
+MKS_WIFI_MODULE                        = QRCode=https://github.com/makerbase-mks/QRCode/archive/261c5a696a.zip
 HAS_TRINAMIC_CONFIG                    = TMCStepper@~0.7.3
-                                         src_filter=+<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp> +<src/gcode/feature/trinamic/M919.cpp>
-HAS_T(RINAMIC_CONFIG|MC_SPI)           = src_filter=+<src/feature/tmc_util.cpp>
-HAS_STEALTHCHOP                        = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
-SR_LCD_3W_NL                           = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
+                                         build_src_filter=+<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp> +<src/gcode/feature/trinamic/M919.cpp>
+HAS_T(RINAMIC_CONFIG|MC_SPI)           = build_src_filter=+<src/feature/tmc_util.cpp>
+HAS_STEALTHCHOP                        = build_src_filter=+<src/gcode/feature/trinamic/M569.cpp>
+SR_LCD_3W_NL                           = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/6f53c19a8a.zip
 HAS_MOTOR_CURRENT_I2C                  = SlowSoftI2CMaster
-                                         src_filter=+<src/feature/digipot>
-HAS_TMC26X                             = TMC26XStepper=https://github.com/MarlinFirmware/TMC26XStepper/archive/master.zip
-                                         src_filter=+<src/module/stepper/TMC26X.cpp>
+                                         build_src_filter=+<src/feature/digipot>
+HAS_TMC26X                             = TMC26XStepper=https://github.com/MarlinFirmware/TMC26XStepper/archive/a7d7c92a13.zip
+                                         build_src_filter=+<src/module/stepper/TMC26X.cpp>
 HAS_L64XX                              = Arduino-L6470@0.8.0
-                                         src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470> +<src/HAL/shared/HAL_spi_L6470.cpp>
-LIB_INTERNAL_MAX31865                  = src_filter=+<src/libs/MAX31865.cpp>
+                                         build_src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470> +<src/HAL/shared/HAL_spi_L6470.cpp>
+LIB_INTERNAL_MAX31865                  = build_src_filter=+<src/libs/MAX31865.cpp>
 NEOPIXEL_LED                           = adafruit/Adafruit NeoPixel@~1.8.0
-                                         src_filter=+<src/feature/leds/neopixel.cpp>
+                                         build_src_filter=+<src/feature/leds/neopixel.cpp>
 I2C_AMMETER                            = peterus/INA226Lib@1.1.2
-                                         src_filter=+<src/feature/ammeter.cpp>
+                                         build_src_filter=+<src/feature/ammeter.cpp>
 USES_LIQUIDCRYSTAL                     = LiquidCrystal=https://github.com/MarlinFirmware/New-LiquidCrystal/archive/1.5.1.zip
 USES_LIQUIDCRYSTAL_I2C                 = marcoschwartz/LiquidCrystal_I2C@1.1.4
 USES_LIQUIDTWI2                        = LiquidTWI2@1.2.7
-HAS_LCDPRINT                           = src_filter=+<src/lcd/lcdprint.cpp>
-HAS_MARLINUI_HD44780                   = src_filter=+<src/lcd/HD44780>
+HAS_LCDPRINT                           = build_src_filter=+<src/lcd/lcdprint.cpp>
+HAS_MARLINUI_HD44780                   = build_src_filter=+<src/lcd/HD44780>
 HAS_MARLINUI_U8GLIB                    = U8glib-HAL@~0.5.2
-                                         src_filter=+<src/lcd/dogm>
-HAS_(FSMC|SPI|LTDC)_TFT                = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
-HAS_FSMC_TFT                           = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
-HAS_SPI_TFT                            = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
-I2C_EEPROM                             = src_filter=+<src/HAL/shared/eeprom_if_i2c.cpp>
-SOFT_I2C_EEPROM                        = SlowSoftI2CMaster, SlowSoftWire=https://github.com/felias-fogg/SlowSoftWire/archive/master.zip
-SPI_EEPROM                             = src_filter=+<src/HAL/shared/eeprom_if_spi.cpp>
-HAS_DWIN_E3V2|IS_DWIN_MARLINUI         = src_filter=+<src/lcd/e3v2/common>
-DWIN_CREALITY_LCD                      = src_filter=+<src/lcd/e3v2/creality>
-DWIN_LCD_PROUI                         = src_filter=+<src/lcd/e3v2/proui>
-DWIN_CREALITY_LCD_JYERSUI              = src_filter=+<src/lcd/e3v2/jyersui>
-IS_DWIN_MARLINUI                       = src_filter=+<src/lcd/e3v2/marlinui>
-HAS_GRAPHICAL_TFT                      = src_filter=+<src/lcd/tft>
-IS_TFTGLCD_PANEL                       = src_filter=+<src/lcd/TFTGLCD>
-HAS_TOUCH_BUTTONS                      = src_filter=+<src/lcd/touch/touch_buttons.cpp>
-HAS_MARLINUI_MENU                      = src_filter=+<src/lcd/menu>
-HAS_GAMES                              = src_filter=+<src/lcd/menu/game/game.cpp>
-MARLIN_BRICKOUT                        = src_filter=+<src/lcd/menu/game/brickout.cpp>
-MARLIN_INVADERS                        = src_filter=+<src/lcd/menu/game/invaders.cpp>
-MARLIN_MAZE                            = src_filter=+<src/lcd/menu/game/maze.cpp>
-MARLIN_SNAKE                           = src_filter=+<src/lcd/menu/game/snake.cpp>
-HAS_MENU_BACKLASH                      = src_filter=+<src/lcd/menu/menu_backlash.cpp>
-HAS_MENU_BED_CORNERS                   = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
-LCD_BED_LEVELING                       = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
-HAS_MENU_CANCELOBJECT                  = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
-HAS_MENU_DELTA_CALIBRATE               = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
-HAS_MENU_FILAMENT                      = src_filter=+<src/lcd/menu/menu_filament.cpp>
-LCD_INFO_MENU                          = src_filter=+<src/lcd/menu/menu_info.cpp>
-HAS_MENU_JOB_RECOVERY                  = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
-HAS_MULTI_LANGUAGE                     = src_filter=+<src/lcd/menu/menu_language.cpp> +<src/gcode/lcd/M414.cpp>
-HAS_MENU_LED                           = src_filter=+<src/lcd/menu/menu_led.cpp>
-HAS_MENU_MEDIA                         = src_filter=+<src/lcd/menu/menu_media.cpp>
-HAS_MENU_MIXER                         = src_filter=+<src/lcd/menu/menu_mixer.cpp>
-HAS_MENU_MMU2                          = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
-HAS_MENU_PASSWORD                      = src_filter=+<src/lcd/menu/menu_password.cpp>
-HAS_MENU_POWER_MONITOR                 = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
-HAS_MENU_CUTTER                        = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
-HAS_MENU_TEMPERATURE                   = src_filter=+<src/lcd/menu/menu_temperature.cpp>
-HAS_MENU_TMC                           = src_filter=+<src/lcd/menu/menu_tmc.cpp>
-HAS_MENU_TOUCH_SCREEN                  = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
-HAS_MENU_TRAMMING                      = src_filter=+<src/lcd/menu/menu_tramming.cpp>
-HAS_MENU_UBL                           = src_filter=+<src/lcd/menu/menu_ubl.cpp>
-ANYCUBIC_LCD_CHIRON                    = src_filter=+<src/lcd/extui/anycubic_chiron>
-ANYCUBIC_LCD_I3MEGA                    = src_filter=+<src/lcd/extui/anycubic_i3mega>
-HAS_DGUS_LCD_CLASSIC                   = src_filter=+<src/lcd/extui/dgus>
-DGUS_LCD_UI_RELOADED                   = src_filter=+<src/lcd/extui/dgus_reloaded>
-DGUS_LCD_UI_FYSETC                     = src_filter=+<src/lcd/extui/dgus/fysetc>
-DGUS_LCD_UI_HIPRECY                    = src_filter=+<src/lcd/extui/dgus/hiprecy>
-DGUS_LCD_UI_MKS                        = src_filter=+<src/lcd/extui/dgus/mks>
-DGUS_LCD_UI_ORIGIN                     = src_filter=+<src/lcd/extui/dgus/origin>
-EXTUI_EXAMPLE                          = src_filter=+<src/lcd/extui/example>
-TOUCH_UI_FTDI_EVE                      = src_filter=+<src/lcd/extui/ftdi_eve_touch_ui>
-MALYAN_LCD                             = src_filter=+<src/lcd/extui/malyan>
-NEXTION_TFT                            = src_filter=+<src/lcd/extui/nextion>
-USE_UHS2_USB                           = src_filter=+<src/sd/usb_flashdrive/lib-uhs2>
-USE_UHS3_USB                           = src_filter=+<src/sd/usb_flashdrive/lib-uhs3>
-USB_FLASH_DRIVE_SUPPORT                = src_filter=+<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
-HAS_MCP3426_ADC                        = src_filter=+<src/feature/adc> +<src/gcode/feature/adc>
-AUTO_BED_LEVELING_BILINEAR             = src_filter=+<src/feature/bedlevel/abl>
-AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
-X_AXIS_TWIST_COMPENSATION              = src_filter=+<src/feature/x_twist.cpp> +<src/lcd/menu/menu_x_twist.cpp> +<src/gcode/probe/M423.cpp>
-MESH_BED_LEVELING                      = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
-AUTO_BED_LEVELING_UBL                  = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
-UBL_HILBERT_CURVE                      = src_filter=+<src/feature/bedlevel/hilbert_curve.cpp>
-BACKLASH_COMPENSATION                  = src_filter=+<src/feature/backlash.cpp>
-BARICUDA                               = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
-BINARY_FILE_TRANSFER                   = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
-BLTOUCH                                = src_filter=+<src/feature/bltouch.cpp>
-CANCEL_OBJECTS                         = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
-CASE_LIGHT_ENABLE                      = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
-EXTERNAL_CLOSED_LOOP_CONTROLLER        = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
-USE_CONTROLLER_FAN                     = src_filter=+<src/feature/controllerfan.cpp>
-HAS_COOLER|LASER_COOLANT_FLOW_METER    = src_filter=+<src/feature/cooler.cpp>
-HAS_MOTOR_CURRENT_DAC                  = src_filter=+<src/feature/dac>
-DIRECT_STEPPING                        = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
-EMERGENCY_PARSER                       = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
-EASYTHREED_UI                          = src_filter=+<src/feature/easythreed_ui.cpp>
-I2C_POSITION_ENCODERS                  = src_filter=+<src/feature/encoder_i2c.cpp>
-IIC_BL24CXX_EEPROM                     = src_filter=+<src/libs/BL24CXX.cpp>
-HAS_SPI_FLASH                          = src_filter=+<src/libs/W25Qxx.cpp>
-HAS_ETHERNET                           = src_filter=+<src/feature/ethernet.cpp> +<src/gcode/feature/network/M552-M554.cpp>
-HAS_FANCHECK                           = src_filter=+<src/feature/fancheck.cpp> +<src/gcode/temp/M123.cpp>
-HAS_FANMUX                             = src_filter=+<src/feature/fanmux.cpp>
-FILAMENT_WIDTH_SENSOR                  = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
-FWRETRACT                              = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
-HOST_ACTION_COMMANDS                   = src_filter=+<src/feature/host_actions.cpp>
-HOTEND_IDLE_TIMEOUT                    = src_filter=+<src/feature/hotend_idle.cpp>
-JOYSTICK                               = src_filter=+<src/feature/joystick.cpp>
-BLINKM                                 = src_filter=+<src/feature/leds/blinkm.cpp>
-HAS_COLOR_LEDS                         = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
-PCA9533                                = src_filter=+<src/feature/leds/pca9533.cpp>
-PCA9632                                = src_filter=+<src/feature/leds/pca9632.cpp>
-PRINTER_EVENT_LEDS                     = src_filter=+<src/feature/leds/printer_event_leds.cpp>
-TEMP_STAT_LEDS                         = src_filter=+<src/feature/leds/tempstat.cpp>
-MAX7219_DEBUG                          = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
-HAS_MEATPACK                           = src_filter=+<src/feature/meatpack.cpp>
-MIXING_EXTRUDER                        = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
-HAS_PRUSA_MMU1                         = src_filter=+<src/feature/mmu/mmu.cpp>
-HAS_PRUSA_MMU2                         = src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
-PASSWORD_FEATURE                       = src_filter=+<src/feature/password> +<src/gcode/feature/password>
-ADVANCED_PAUSE_FEATURE                 = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
-PSU_CONTROL                            = src_filter=+<src/feature/power.cpp>
-HAS_POWER_MONITOR                      = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
-POWER_LOSS_RECOVERY                    = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
-HAS_PTC                                = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
-HAS_FILAMENT_SENSOR                    = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
-(EXT|MANUAL)_SOLENOID.*                = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
-MK2_MULTIPLEXER                        = src_filter=+<src/feature/snmm.cpp>
-HAS_CUTTER                             = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
-HAS_DRIVER_SAFE_POWER_PROTECT          = src_filter=+<src/feature/stepper_driver_safety.cpp>
-EXPERIMENTAL_I2CBUS                    = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
-G26_MESH_VALIDATION                    = src_filter=+<src/gcode/bedlevel/G26.cpp>
-ASSISTED_TRAMMING                      = src_filter=+<src/feature/tramming.cpp> +<src/gcode/bedlevel/G35.cpp>
-HAS_MESH                               = src_filter=+<src/gcode/bedlevel/G42.cpp>
-HAS_LEVELING                           = src_filter=+<src/gcode/bedlevel/M420.cpp> +<src/feature/bedlevel/bedlevel.cpp>
-MECHANICAL_GANTRY_CAL.+                = src_filter=+<src/gcode/calibrate/G34.cpp>
-Z_MULTI_ENDSTOPS|Z_STEPPER_AUTO_ALIGN  = src_filter=+<src/gcode/calibrate/G34_M422.cpp>
-Z_STEPPER_AUTO_ALIGN                   = src_filter=+<src/feature/z_stepper_align.cpp>
-DELTA_AUTO_CALIBRATION                 = src_filter=+<src/gcode/calibrate/G33.cpp>
-CALIBRATION_GCODE                      = src_filter=+<src/gcode/calibrate/G425.cpp>
-Z_MIN_PROBE_REPEATABILITY_TEST         = src_filter=+<src/gcode/calibrate/M48.cpp>
-M100_FREE_MEMORY_WATCHER               = src_filter=+<src/gcode/calibrate/M100.cpp>
-BACKLASH_GCODE                         = src_filter=+<src/gcode/calibrate/M425.cpp>
-IS_KINEMATIC                           = src_filter=+<src/gcode/calibrate/M665.cpp>
-HAS_EXTRA_ENDSTOPS                     = src_filter=+<src/gcode/calibrate/M666.cpp>
-SKEW_CORRECTION_GCODE                  = src_filter=+<src/gcode/calibrate/M852.cpp>
-DIRECT_PIN_CONTROL                     = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
-PINS_DEBUGGING                         = src_filter=+<src/gcode/config/M43.cpp>
-NO_VOLUMETRICS                         = src_filter=-<src/gcode/config/M200-M205.cpp>
-HAS_MULTI_EXTRUDER                     = src_filter=+<src/gcode/config/M217.cpp>
-HAS_HOTEND_OFFSET                      = src_filter=+<src/gcode/config/M218.cpp>
-EDITABLE_SERVO_ANGLES                  = src_filter=+<src/gcode/config/M281.cpp>
-PIDTEMP                                = src_filter=+<src/gcode/config/M301.cpp>
-PREVENT_COLD_EXTRUSION                 = src_filter=+<src/gcode/config/M302.cpp>
-PIDTEMPBED                             = src_filter=+<src/gcode/config/M304.cpp>
-HAS_USER_THERMISTORS                   = src_filter=+<src/gcode/config/M305.cpp>
-SD_ABORT_ON_ENDSTOP_HIT                = src_filter=+<src/gcode/config/M540.cpp>
-BAUD_RATE_GCODE                        = src_filter=+<src/gcode/config/M575.cpp>
-HAS_SMART_EFF_MOD                      = src_filter=+<src/gcode/config/M672.cpp>
-COOLANT_CONTROL|AIR_ASSIST             = src_filter=+<src/gcode/control/M7-M9.cpp>
-AIR_EVACUATION                         = src_filter=+<src/gcode/control/M10-M11.cpp>
-HAS_SOFTWARE_ENDSTOPS                  = src_filter=+<src/gcode/control/M211.cpp>
-SERVO_DETACH_GCODE                     = src_filter=+<src/gcode/control/M282.cpp>
-HAS_DUPLICATION_MODE                   = src_filter=+<src/gcode/control/M605.cpp>
-LIN_ADVANCE                            = src_filter=+<src/gcode/feature/advance>
-PHOTO_GCODE                            = src_filter=+<src/gcode/feature/camera>
-CONTROLLER_FAN_EDITABLE                = src_filter=+<src/gcode/feature/controllerfan>
-GCODE_MACROS                           = src_filter=+<src/gcode/feature/macro>
-GRADIENT_MIX                           = src_filter=+<src/gcode/feature/mixing/M166.cpp>
-HAS_SAVED_POSITIONS                    = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
-PARK_HEAD_ON_PAUSE                     = src_filter=+<src/gcode/feature/pause/M125.cpp>
-FILAMENT_LOAD_UNLOAD_GCODES            = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
-CNC_WORKSPACE_PLANES                   = src_filter=+<src/gcode/geometry/G17-G19.cpp>
-CNC_COORDINATE_SYSTEMS                 = src_filter=+<src/gcode/geometry/G53-G59.cpp>
-HAS_M206_COMMAND                       = src_filter=+<src/gcode/geometry/M206_M428.cpp>
-EXPECTED_PRINTER_CHECK                 = src_filter=+<src/gcode/host/M16.cpp>
-HOST_KEEPALIVE_FEATURE                 = src_filter=+<src/gcode/host/M113.cpp>
-AUTO_REPORT_POSITION                   = src_filter=+<src/gcode/host/M154.cpp>
-REPETIER_GCODE_M360                    = src_filter=+<src/gcode/host/M360.cpp>
-HAS_GCODE_M876                         = src_filter=+<src/gcode/host/M876.cpp>
-HAS_RESUME_CONTINUE                    = src_filter=+<src/gcode/lcd/M0_M1.cpp>
-LCD_SET_PROGRESS_MANUALLY              = src_filter=+<src/gcode/lcd/M73.cpp>
-HAS_STATUS_MESSAGE                     = src_filter=+<src/gcode/lcd/M117.cpp>
-HAS_LCD_CONTRAST                       = src_filter=+<src/gcode/lcd/M250.cpp>
-HAS_GCODE_M255                         = src_filter=+<src/gcode/lcd/M255.cpp>
-HAS_LCD_BRIGHTNESS                     = src_filter=+<src/gcode/lcd/M256.cpp>
-HAS_SOUND                              = src_filter=+<src/gcode/lcd/M300.cpp>
-TOUCH_SCREEN_CALIBRATION               = src_filter=+<src/gcode/lcd/M995.cpp>
-ARC_SUPPORT                            = src_filter=+<src/gcode/motion/G2_G3.cpp>
-GCODE_MOTION_MODES                     = src_filter=+<src/gcode/motion/G80.cpp>
-BABYSTEPPING                           = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
-Z_PROBE_SLED                           = src_filter=+<src/gcode/probe/G31_G32.cpp>
-G38_PROBE_TARGET                       = src_filter=+<src/gcode/probe/G38.cpp>
-MAGNETIC_PARKING_EXTRUDER              = src_filter=+<src/gcode/probe/M951.cpp>
-SDSUPPORT                              = src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.cpp> +<src/sd/SdBaseFile.cpp> +<src/sd/SdFatUtil.cpp> +<src/sd/SdFile.cpp> +<src/sd/SdVolume.cpp> +<src/gcode/sd>
-HAS_MEDIA_SUBCALLS                     = src_filter=+<src/gcode/sd/M32.cpp>
-GCODE_REPEAT_MARKERS                   = src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
-HAS_EXTRUDERS                          = src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
-HAS_TEMP_PROBE                         = src_filter=+<src/gcode/temp/M192.cpp>
-HAS_COOLER                             = src_filter=+<src/gcode/temp/M143_M193.cpp>
-AUTO_REPORT_TEMPERATURES               = src_filter=+<src/gcode/temp/M155.cpp>
-MPCTEMP                                = src_filter=+<src/gcode/temp/M306.cpp>
-INCH_MODE_SUPPORT                      = src_filter=+<src/gcode/units/G20_G21.cpp>
-TEMPERATURE_UNITS_SUPPORT              = src_filter=+<src/gcode/units/M149.cpp>
-NEED_HEX_PRINT                         = src_filter=+<src/libs/hex_print.cpp>
-NEED_LSF                               = src_filter=+<src/libs/least_squares_fit.cpp>
-NOZZLE_PARK_FEATURE                    = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
-NOZZLE_CLEAN_FEATURE                   = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
-DELTA                                  = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
-POLARGRAPH                             = src_filter=+<src/module/polargraph.cpp>
-BEZIER_CURVE_SUPPORT                   = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
-PRINTCOUNTER                           = src_filter=+<src/module/printcounter.cpp>
-HAS_BED_PROBE                          = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
-IS_SCARA                               = src_filter=+<src/module/scara.cpp>
-HAS_SERVOS                             = src_filter=+<src/module/servo.cpp> +<src/gcode/control/M280.cpp>
-MORGAN_SCARA                           = src_filter=+<src/gcode/scara>
-HAS_MICROSTEPS                         = src_filter=+<src/gcode/control/M350_M351.cpp>
+                                         build_src_filter=+<src/lcd/dogm>
+HAS_(FSMC|SPI|LTDC)_TFT                = build_src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
+HAS_FSMC_TFT                           = build_src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
+HAS_SPI_TFT                            = build_src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
+I2C_EEPROM                             = build_src_filter=+<src/HAL/shared/eeprom_if_i2c.cpp>
+SOFT_I2C_EEPROM                        = SlowSoftI2CMaster, SlowSoftWire=https://github.com/felias-fogg/SlowSoftWire/archive/f34d777f39.zip
+SPI_EEPROM                             = build_src_filter=+<src/HAL/shared/eeprom_if_spi.cpp>
+HAS_DWIN_E3V2|IS_DWIN_MARLINUI         = build_src_filter=+<src/lcd/e3v2/common>
+DWIN_CREALITY_LCD                      = build_src_filter=+<src/lcd/e3v2/creality>
+DWIN_LCD_PROUI                         = build_src_filter=+<src/lcd/e3v2/proui>
+DWIN_CREALITY_LCD_JYERSUI              = build_src_filter=+<src/lcd/e3v2/jyersui>
+IS_DWIN_MARLINUI                       = build_src_filter=+<src/lcd/e3v2/marlinui>
+HAS_GRAPHICAL_TFT                      = build_src_filter=+<src/lcd/tft>
+IS_TFTGLCD_PANEL                       = build_src_filter=+<src/lcd/TFTGLCD>
+HAS_TOUCH_BUTTONS                      = build_src_filter=+<src/lcd/touch/touch_buttons.cpp>
+HAS_MARLINUI_MENU                      = build_src_filter=+<src/lcd/menu>
+HAS_GAMES                              = build_src_filter=+<src/lcd/menu/game/game.cpp>
+MARLIN_BRICKOUT                        = build_src_filter=+<src/lcd/menu/game/brickout.cpp>
+MARLIN_INVADERS                        = build_src_filter=+<src/lcd/menu/game/invaders.cpp>
+MARLIN_MAZE                            = build_src_filter=+<src/lcd/menu/game/maze.cpp>
+MARLIN_SNAKE                           = build_src_filter=+<src/lcd/menu/game/snake.cpp>
+HAS_MENU_BACKLASH                      = build_src_filter=+<src/lcd/menu/menu_backlash.cpp>
+HAS_MENU_BED_CORNERS                   = build_src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
+LCD_BED_LEVELING                       = build_src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
+HAS_MENU_CANCELOBJECT                  = build_src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
+HAS_MENU_DELTA_CALIBRATE               = build_src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
+HAS_MENU_FILAMENT                      = build_src_filter=+<src/lcd/menu/menu_filament.cpp>
+LCD_INFO_MENU                          = build_src_filter=+<src/lcd/menu/menu_info.cpp>
+HAS_MENU_JOB_RECOVERY                  = build_src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
+HAS_MULTI_LANGUAGE                     = build_src_filter=+<src/lcd/menu/menu_language.cpp> +<src/gcode/lcd/M414.cpp>
+HAS_MENU_LED                           = build_src_filter=+<src/lcd/menu/menu_led.cpp>
+HAS_MENU_MEDIA                         = build_src_filter=+<src/lcd/menu/menu_media.cpp>
+HAS_MENU_MIXER                         = build_src_filter=+<src/lcd/menu/menu_mixer.cpp>
+HAS_MENU_MMU2                          = build_src_filter=+<src/lcd/menu/menu_mmu2.cpp>
+HAS_MENU_PASSWORD                      = build_src_filter=+<src/lcd/menu/menu_password.cpp>
+HAS_MENU_POWER_MONITOR                 = build_src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
+HAS_MENU_CUTTER                        = build_src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
+HAS_MENU_TEMPERATURE                   = build_src_filter=+<src/lcd/menu/menu_temperature.cpp>
+HAS_MENU_TMC                           = build_src_filter=+<src/lcd/menu/menu_tmc.cpp>
+HAS_MENU_TOUCH_SCREEN                  = build_src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
+HAS_MENU_TRAMMING                      = build_src_filter=+<src/lcd/menu/menu_tramming.cpp>
+HAS_MENU_UBL                           = build_src_filter=+<src/lcd/menu/menu_ubl.cpp>
+ANYCUBIC_LCD_CHIRON                    = build_src_filter=+<src/lcd/extui/anycubic_chiron>
+ANYCUBIC_LCD_I3MEGA                    = build_src_filter=+<src/lcd/extui/anycubic_i3mega>
+HAS_DGUS_LCD_CLASSIC                   = build_src_filter=+<src/lcd/extui/dgus>
+DGUS_LCD_UI_RELOADED                   = build_src_filter=+<src/lcd/extui/dgus_reloaded>
+DGUS_LCD_UI_FYSETC                     = build_src_filter=+<src/lcd/extui/dgus/fysetc>
+DGUS_LCD_UI_HIPRECY                    = build_src_filter=+<src/lcd/extui/dgus/hiprecy>
+DGUS_LCD_UI_MKS                        = build_src_filter=+<src/lcd/extui/dgus/mks>
+DGUS_LCD_UI_ORIGIN                     = build_src_filter=+<src/lcd/extui/dgus/origin>
+EXTUI_EXAMPLE                          = build_src_filter=+<src/lcd/extui/example>
+TOUCH_UI_FTDI_EVE                      = build_src_filter=+<src/lcd/extui/ftdi_eve_touch_ui>
+MALYAN_LCD                             = build_src_filter=+<src/lcd/extui/malyan>
+NEXTION_TFT                            = build_src_filter=+<src/lcd/extui/nextion>
+USE_UHS2_USB                           = build_src_filter=+<src/sd/usb_flashdrive/lib-uhs2>
+USE_UHS3_USB                           = build_src_filter=+<src/sd/usb_flashdrive/lib-uhs3>
+USB_FLASH_DRIVE_SUPPORT                = build_src_filter=+<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
+HAS_MCP3426_ADC                        = build_src_filter=+<src/feature/adc> +<src/gcode/feature/adc>
+AUTO_BED_LEVELING_BILINEAR             = build_src_filter=+<src/feature/bedlevel/abl>
+AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = build_src_filter=+<src/gcode/bedlevel/abl>
+X_AXIS_TWIST_COMPENSATION              = build_src_filter=+<src/feature/x_twist.cpp> +<src/lcd/menu/menu_x_twist.cpp> +<src/gcode/probe/M423.cpp>
+MESH_BED_LEVELING                      = build_src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
+AUTO_BED_LEVELING_UBL                  = build_src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
+UBL_HILBERT_CURVE                      = build_src_filter=+<src/feature/bedlevel/hilbert_curve.cpp>
+BACKLASH_COMPENSATION                  = build_src_filter=+<src/feature/backlash.cpp>
+BARICUDA                               = build_src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
+BINARY_FILE_TRANSFER                   = build_src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
+BLTOUCH                                = build_src_filter=+<src/feature/bltouch.cpp>
+CANCEL_OBJECTS                         = build_src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
+CASE_LIGHT_ENABLE                      = build_src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
+EXTERNAL_CLOSED_LOOP_CONTROLLER        = build_src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
+USE_CONTROLLER_FAN                     = build_src_filter=+<src/feature/controllerfan.cpp>
+HAS_COOLER|LASER_COOLANT_FLOW_METER    = build_src_filter=+<src/feature/cooler.cpp>
+HAS_MOTOR_CURRENT_DAC                  = build_src_filter=+<src/feature/dac>
+DIRECT_STEPPING                        = build_src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
+EMERGENCY_PARSER                       = build_src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
+EASYTHREED_UI                          = build_src_filter=+<src/feature/easythreed_ui.cpp>
+I2C_POSITION_ENCODERS                  = build_src_filter=+<src/feature/encoder_i2c.cpp>
+IIC_BL24CXX_EEPROM                     = build_src_filter=+<src/libs/BL24CXX.cpp>
+HAS_SPI_FLASH                          = build_src_filter=+<src/libs/W25Qxx.cpp>
+HAS_ETHERNET                           = build_src_filter=+<src/feature/ethernet.cpp> +<src/gcode/feature/network/M552-M554.cpp>
+HAS_FANCHECK                           = build_src_filter=+<src/feature/fancheck.cpp> +<src/gcode/temp/M123.cpp>
+HAS_FANMUX                             = build_src_filter=+<src/feature/fanmux.cpp>
+FILAMENT_WIDTH_SENSOR                  = build_src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
+FWRETRACT                              = build_src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
+HOST_ACTION_COMMANDS                   = build_src_filter=+<src/feature/host_actions.cpp>
+HOTEND_IDLE_TIMEOUT                    = build_src_filter=+<src/feature/hotend_idle.cpp>
+JOYSTICK                               = build_src_filter=+<src/feature/joystick.cpp>
+BLINKM                                 = build_src_filter=+<src/feature/leds/blinkm.cpp>
+HAS_COLOR_LEDS                         = build_src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
+PCA9533                                = build_src_filter=+<src/feature/leds/pca9533.cpp>
+PCA9632                                = build_src_filter=+<src/feature/leds/pca9632.cpp>
+PRINTER_EVENT_LEDS                     = build_src_filter=+<src/feature/leds/printer_event_leds.cpp>
+TEMP_STAT_LEDS                         = build_src_filter=+<src/feature/leds/tempstat.cpp>
+MAX7219_DEBUG                          = build_src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
+HAS_MEATPACK                           = build_src_filter=+<src/feature/meatpack.cpp>
+MIXING_EXTRUDER                        = build_src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
+HAS_PRUSA_MMU1                         = build_src_filter=+<src/feature/mmu/mmu.cpp>
+HAS_PRUSA_MMU2                         = build_src_filter=+<src/feature/mmu/mmu2.cpp> +<src/gcode/feature/prusa_MMU2>
+PASSWORD_FEATURE                       = build_src_filter=+<src/feature/password> +<src/gcode/feature/password>
+ADVANCED_PAUSE_FEATURE                 = build_src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
+PSU_CONTROL                            = build_src_filter=+<src/feature/power.cpp>
+HAS_POWER_MONITOR                      = build_src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
+POWER_LOSS_RECOVERY                    = build_src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
+HAS_PTC                                = build_src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M871.cpp>
+HAS_FILAMENT_SENSOR                    = build_src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
+(EXT|MANUAL)_SOLENOID.*                = build_src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
+MK2_MULTIPLEXER                        = build_src_filter=+<src/feature/snmm.cpp>
+HAS_CUTTER                             = build_src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
+HAS_DRIVER_SAFE_POWER_PROTECT          = build_src_filter=+<src/feature/stepper_driver_safety.cpp>
+EXPERIMENTAL_I2CBUS                    = build_src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
+G26_MESH_VALIDATION                    = build_src_filter=+<src/gcode/bedlevel/G26.cpp>
+ASSISTED_TRAMMING                      = build_src_filter=+<src/feature/tramming.cpp> +<src/gcode/bedlevel/G35.cpp>
+HAS_MESH                               = build_src_filter=+<src/gcode/bedlevel/G42.cpp>
+HAS_LEVELING                           = build_src_filter=+<src/gcode/bedlevel/M420.cpp> +<src/feature/bedlevel/bedlevel.cpp>
+MECHANICAL_GANTRY_CAL.+                = build_src_filter=+<src/gcode/calibrate/G34.cpp>
+Z_MULTI_ENDSTOPS|Z_STEPPER_AUTO_ALIGN  = build_src_filter=+<src/gcode/calibrate/G34_M422.cpp>
+Z_STEPPER_AUTO_ALIGN                   = build_src_filter=+<src/feature/z_stepper_align.cpp>
+DELTA_AUTO_CALIBRATION                 = build_src_filter=+<src/gcode/calibrate/G33.cpp>
+CALIBRATION_GCODE                      = build_src_filter=+<src/gcode/calibrate/G425.cpp>
+Z_MIN_PROBE_REPEATABILITY_TEST         = build_src_filter=+<src/gcode/calibrate/M48.cpp>
+M100_FREE_MEMORY_WATCHER               = build_src_filter=+<src/gcode/calibrate/M100.cpp>
+BACKLASH_GCODE                         = build_src_filter=+<src/gcode/calibrate/M425.cpp>
+IS_KINEMATIC                           = build_src_filter=+<src/gcode/calibrate/M665.cpp>
+HAS_EXTRA_ENDSTOPS                     = build_src_filter=+<src/gcode/calibrate/M666.cpp>
+SKEW_CORRECTION_GCODE                  = build_src_filter=+<src/gcode/calibrate/M852.cpp>
+DIRECT_PIN_CONTROL                     = build_src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
+PINS_DEBUGGING                         = build_src_filter=+<src/gcode/config/M43.cpp>
+NO_VOLUMETRICS                         = build_src_filter=-<src/gcode/config/M200-M205.cpp>
+HAS_MULTI_EXTRUDER                     = build_src_filter=+<src/gcode/config/M217.cpp>
+HAS_HOTEND_OFFSET                      = build_src_filter=+<src/gcode/config/M218.cpp>
+EDITABLE_SERVO_ANGLES                  = build_src_filter=+<src/gcode/config/M281.cpp>
+PIDTEMP                                = build_src_filter=+<src/gcode/config/M301.cpp>
+PREVENT_COLD_EXTRUSION                 = build_src_filter=+<src/gcode/config/M302.cpp>
+PIDTEMPBED                             = build_src_filter=+<src/gcode/config/M304.cpp>
+HAS_USER_THERMISTORS                   = build_src_filter=+<src/gcode/config/M305.cpp>
+SD_ABORT_ON_ENDSTOP_HIT                = build_src_filter=+<src/gcode/config/M540.cpp>
+BAUD_RATE_GCODE                        = build_src_filter=+<src/gcode/config/M575.cpp>
+HAS_SMART_EFF_MOD                      = build_src_filter=+<src/gcode/config/M672.cpp>
+COOLANT_CONTROL|AIR_ASSIST             = build_src_filter=+<src/gcode/control/M7-M9.cpp>
+AIR_EVACUATION                         = build_src_filter=+<src/gcode/control/M10-M11.cpp>
+HAS_SOFTWARE_ENDSTOPS                  = build_src_filter=+<src/gcode/control/M211.cpp>
+SERVO_DETACH_GCODE                     = build_src_filter=+<src/gcode/control/M282.cpp>
+HAS_DUPLICATION_MODE                   = build_src_filter=+<src/gcode/control/M605.cpp>
+LIN_ADVANCE                            = build_src_filter=+<src/gcode/feature/advance>
+PHOTO_GCODE                            = build_src_filter=+<src/gcode/feature/camera>
+CONTROLLER_FAN_EDITABLE                = build_src_filter=+<src/gcode/feature/controllerfan>
+GCODE_MACROS                           = build_src_filter=+<src/gcode/feature/macro>
+GRADIENT_MIX                           = build_src_filter=+<src/gcode/feature/mixing/M166.cpp>
+HAS_SAVED_POSITIONS                    = build_src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
+PARK_HEAD_ON_PAUSE                     = build_src_filter=+<src/gcode/feature/pause/M125.cpp>
+FILAMENT_LOAD_UNLOAD_GCODES            = build_src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
+CNC_WORKSPACE_PLANES                   = build_src_filter=+<src/gcode/geometry/G17-G19.cpp>
+CNC_COORDINATE_SYSTEMS                 = build_src_filter=+<src/gcode/geometry/G53-G59.cpp>
+HAS_M206_COMMAND                       = build_src_filter=+<src/gcode/geometry/M206_M428.cpp>
+EXPECTED_PRINTER_CHECK                 = build_src_filter=+<src/gcode/host/M16.cpp>
+HOST_KEEPALIVE_FEATURE                 = build_src_filter=+<src/gcode/host/M113.cpp>
+AUTO_REPORT_POSITION                   = build_src_filter=+<src/gcode/host/M154.cpp>
+REPETIER_GCODE_M360                    = build_src_filter=+<src/gcode/host/M360.cpp>
+HAS_GCODE_M876                         = build_src_filter=+<src/gcode/host/M876.cpp>
+HAS_RESUME_CONTINUE                    = build_src_filter=+<src/gcode/lcd/M0_M1.cpp>
+LCD_SET_PROGRESS_MANUALLY              = build_src_filter=+<src/gcode/lcd/M73.cpp>
+HAS_STATUS_MESSAGE                     = build_src_filter=+<src/gcode/lcd/M117.cpp>
+HAS_LCD_CONTRAST                       = build_src_filter=+<src/gcode/lcd/M250.cpp>
+HAS_GCODE_M255                         = build_src_filter=+<src/gcode/lcd/M255.cpp>
+HAS_LCD_BRIGHTNESS                     = build_src_filter=+<src/gcode/lcd/M256.cpp>
+HAS_SOUND                              = build_src_filter=+<src/gcode/lcd/M300.cpp>
+TOUCH_SCREEN_CALIBRATION               = build_src_filter=+<src/gcode/lcd/M995.cpp>
+ARC_SUPPORT                            = build_src_filter=+<src/gcode/motion/G2_G3.cpp>
+GCODE_MOTION_MODES                     = build_src_filter=+<src/gcode/motion/G80.cpp>
+BABYSTEPPING                           = build_src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
+Z_PROBE_SLED                           = build_src_filter=+<src/gcode/probe/G31_G32.cpp>
+G38_PROBE_TARGET                       = build_src_filter=+<src/gcode/probe/G38.cpp>
+MAGNETIC_PARKING_EXTRUDER              = build_src_filter=+<src/gcode/probe/M951.cpp>
+SDSUPPORT                              = build_src_filter=+<src/sd/cardreader.cpp> +<src/sd/Sd2Card.cpp> +<src/sd/SdBaseFile.cpp> +<src/sd/SdFatUtil.cpp> +<src/sd/SdFile.cpp> +<src/sd/SdVolume.cpp> +<src/gcode/sd>
+HAS_MEDIA_SUBCALLS                     = build_src_filter=+<src/gcode/sd/M32.cpp>
+GCODE_REPEAT_MARKERS                   = build_src_filter=+<src/feature/repeat.cpp> +<src/gcode/sd/M808.cpp>
+HAS_EXTRUDERS                          = build_src_filter=+<src/gcode/units/M82_M83.cpp> +<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
+HAS_TEMP_PROBE                         = build_src_filter=+<src/gcode/temp/M192.cpp>
+HAS_COOLER                             = build_src_filter=+<src/gcode/temp/M143_M193.cpp>
+AUTO_REPORT_TEMPERATURES               = build_src_filter=+<src/gcode/temp/M155.cpp>
+MPCTEMP                                = build_src_filter=+<src/gcode/temp/M306.cpp>
+INCH_MODE_SUPPORT                      = build_src_filter=+<src/gcode/units/G20_G21.cpp>
+TEMPERATURE_UNITS_SUPPORT              = build_src_filter=+<src/gcode/units/M149.cpp>
+NEED_HEX_PRINT                         = build_src_filter=+<src/libs/hex_print.cpp>
+NEED_LSF                               = build_src_filter=+<src/libs/least_squares_fit.cpp>
+NOZZLE_PARK_FEATURE                    = build_src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
+NOZZLE_CLEAN_FEATURE                   = build_src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
+DELTA                                  = build_src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
+POLARGRAPH                             = build_src_filter=+<src/module/polargraph.cpp>
+BEZIER_CURVE_SUPPORT                   = build_src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
+PRINTCOUNTER                           = build_src_filter=+<src/module/printcounter.cpp>
+HAS_BED_PROBE                          = build_src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
+IS_SCARA                               = build_src_filter=+<src/module/scara.cpp>
+HAS_SERVOS                             = build_src_filter=+<src/module/servo.cpp> +<src/gcode/control/M280.cpp>
+MORGAN_SCARA                           = build_src_filter=+<src/gcode/scara>
+HAS_MICROSTEPS                         = build_src_filter=+<src/gcode/control/M350_M351.cpp>
 (ESP3D_)?WIFISUPPORT                   = AsyncTCP, ESP Async WebServer
-                                         ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/master.zip
+                                         ESP3DLib=https://github.com/luc-github/ESP3DLib/archive/dc0f3d96c6.zip
                                          arduinoWebSockets=links2004/WebSockets@2.3.4
                                          luc-github/ESP32SSDP@1.1.1
                                          lib_ignore=ESPAsyncTCP

ini/native.ini

@@ -41,9 +41,9 @@ debug_build_flags = -fstack-protector-strong -g -g3 -ggdb
 lib_compat_mode   = off
 build_src_filter  = ${common.default_src_filter} +<src/HAL/NATIVE_SIM>
 lib_deps          = ${common.lib_deps}
-  MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/refs/heads/bugfix-2.0.x.zip
-  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/marlin_sim_native.zip
-  LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/master.zip
+  MarlinSimUI=https://github.com/p3p/MarlinSimUI/archive/8791f3ff43.zip
+  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/c6b319f447.zip
+  LiquidCrystal=https://github.com/p3p/LiquidCrystal/archive/322fb5fc23.zip
 extra_scripts = ${common.extra_scripts}
   pre:buildroot/share/PlatformIO/scripts/simulator.py
 
@@ -69,8 +69,9 @@ build_flags = ${simulator_linux.build_flags} ${simulator_linux.release_flags}
 #  sudo port install gcc11 glm libsdl2 libsdl2_net
 #
 #  cd /opt/local/bin
-#  sudo rm -f gcc g++ cc
-#  sudo ln -s gcc-mp-11 gcc ; sudo ln -s g++-mp-11 g++ ; sudo ln -s g++ cc
+#  sudo rm gcc g++ cc ld
+#  sudo ln -s gcc-mp-12 gcc ; sudo ln -s g++-mp-12 g++ ; sudo ln -s g++ cc
+#  sudo ln -s ld-classic ld
 #  cd -
 #  rehash
 #

ini/stm32-common.ini

@@ -35,7 +35,8 @@ extra_scripts = ${common_stm32.extra_scripts}
 # USB Flash Drive mix-ins for STM32
 #
 [stm_flash_drive]
-platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip
+# Arduino_Core_STM32 uses usb-host-msc-cdc-msc-3 branch
+platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/39f37d6d6a.zip
 build_flags       = ${common_stm32.build_flags}
                     -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED
                     -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4

ini/stm32f4.ini

@@ -621,7 +621,7 @@ extra_scripts     = ${common_stm32.extra_scripts}
 #
 # Ender-3 S1 STM32F401RC_creality
 #
-[env:STM32F401RC_creality]
+[STM32F401RC_creality_base]
 extends                     = stm32_variant
 board                       = genericSTM32F401RC
 board_build.variant         = MARLIN_CREALITY_STM32F401RC
@@ -635,6 +635,18 @@ extra_scripts               = ${stm32_variant.extra_scripts}
                               pre:buildroot/share/PlatformIO/scripts/random-bin.py
 monitor_speed               = 115200
 
+[env:STM32F401RC_creality]
+extends                     = STM32F401RC_creality_base
+board_build.offset          = 0x10000
+board_upload.offset_address = 0x08010000
+
+[env:STM32F401RC_creality_nobootloader]
+extends                     = STM32F401RC_creality_base
+board_build.offset          = 0x0000
+board_upload.offset_address = 0x08000000
+debug_tool                  = stlink
+upload_protocol             = stlink
+
 [env:STM32F401RC_creality_jlink]
 extends                     = env:STM32F401RC_creality
 debug_tool                  = jlink

ini/stm32g0.ini

@@ -25,7 +25,8 @@
 [env:STM32G0B1RE_btt]
 extends                     = stm32_variant
 platform                    = ststm32@~14.1.0
-platform_packages           = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
+platform_packages           = framework-arduinoststm32@~4.20600.231001
+                              toolchain-gccarmnoneeabi@1.100301.220327
 board                       = marlin_STM32G0B1RE
 board_build.offset          = 0x2000
 board_upload.offset_address = 0x08002000

ini/stm32h7.ini

@@ -24,7 +24,8 @@
 #
 [env:BTT_SKR_SE_BX]
 extends            = stm32_variant
-platform_packages  = framework-arduinoststm32@https://github.com/thisiskeithb/Arduino_Core_STM32/archive/biqu-bx-workaround.zip
+# framework-arduinoststm32 uses biqu-bx-workaround branch
+platform_packages  = framework-arduinoststm32@https://github.com/thisiskeithb/Arduino_Core_STM32/archive/8b3522051a.zip
 board              = marlin_BTT_SKR_SE_BX
 board_build.offset = 0x20000
 build_flags        = ${stm32_variant.build_flags} ${stm_flash_drive.build_flags}
@@ -45,7 +46,7 @@ debug_tool         = cmsis-dap
 [env:STM32H743Vx_btt]
 extends                     = stm32_variant
 platform                    = ststm32@~14.1.0
-platform_packages           = framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/main.zip
+platform_packages           = framework-arduinoststm32@~4.20600.231001
 board                       = marlin_STM32H743Vx
 board_build.offset          = 0x20000
 board_upload.offset_address = 0x08020000