Version 2.0.4.1 Release

CoreXY Babystepping hotfix
Hotfix for Babystepping
2020-02-22 07:02:55 -06:00 · 2020-02-22 07:02:55 -06:00 · 2020-02-22 02:55:26 -06:00 · 2020-02-22 02:55:26 -06:00 · 2020-02-22 02:55:26 -06:00 · 2020-02-21 08:38:14 -06:00
1050 changed files with 7521 additions and 4472 deletions
--- a/.editorconfig
+++ b/.editorconfig
@@ -0,0 +1,19 @@
+# editorconfig.org
+root = true
+
+[{*.patch,syntax_test_*}]
+trim_trailing_whitespace = false
+
+[{*.c,*.cpp,*.h}]
+charset = utf-8
+
+[{*.c,*.cpp,*.h,Makefile}]
+trim_trailing_whitespace = true
+insert_final_newline = true
+end_of_line = lf
+indent_style = space
+indent_size = 2
+
+[{*.py,*.conf,*.sublime-project}]
+indent_style = tab
+indent_size = 4
--- a/.github/ISSUE_TEMPLATE/bug_report.md
+++ b/.github/ISSUE_TEMPLATE/bug_report.md
@@ -0,0 +1,43 @@
+---
+name: Bug report
+about: Report a bug in Marlin
+title: "[BUG] (short description)"
+labels: ''
+assignees: ''
+
+---
+
+<!--
+
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/MarlinFirmware/Marlin/issues/new/choose
+
+Before filing an issue be sure to test the "bugfix" branches to see whether the issue has been resolved.
+
+-->
+
+### Bug Description
+
+<!-- Description of the bug -->
+
+### My Configurations
+
+**Required:** Please include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
+
+### Steps to Reproduce
+
+<!-- Please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@@ -0,0 +1,17 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Marlin Documentation
+    url: http://marlinfw.org/
+    about: Lots of documentation on installing and using Marlin.
+  - name: MarlinFirmware Facebook group
+    url: https://www.facebook.com/groups/1049718498464482
+    about: Please ask and answer questions here.
+  - name: Marlin on Discord
+    url: https://discord.gg/n5NJ59y
+    about: Join the Discord server for support and discussion.
+  - name: Marlin Discussion Forum
+    url: http://forums.reprap.org/list.php?415
+    about: A searchable web forum hosted by RepRap dot org.
+  - name: Marlin Videos on YouTube
+    url: https://www.youtube.com/results?search_query=marlin+firmware
+    about: Tutorials and more from Marlin users all around the world. Great for new users!
--- a/.github/ISSUE_TEMPLATE/feature_request.md
+++ b/.github/ISSUE_TEMPLATE/feature_request.md
@@ -0,0 +1,35 @@
+---
+name: Feature request
+about: Request a Feature
+title: "[FR] (feature request title)"
+labels: ''
+assignees: ''
+
+---
+
+<!--
+
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/MarlinFirmware/Marlin/issues/new/choose
+
+Before filing an issue be sure to test the "bugfix" branches to see whether the issue has been resolved.
+
+-->
+
+### Description
+
+<!-- Description of the requested feature -->
+
+### Feature Workflow
+
+<!-- Please describe the feature's behavior, user interaction, etc. -->
+
+1. [First Action]
+2. [Second Action]
+3. [and so on...]
+
+#### Additional Information
+
+* Provide pictures or links that demonstrate a similar feature or concept.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
--- a/.github/issue_template.md
+++ b/.github/issue_template.md
@@ -1,31 +1,16 @@
-<!--
+# NO SUPPORT REQUESTS PLEASE

-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
+Support Requests posted here will be automatically closed!

-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
+This Issue Queue is for Marlin bug reports and development-related issues, and we prefer not to handle user-support questions here. See https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/contributing.md#i-dont-want-to-read-this-whole-thing-i-just-have-a-question.

-Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
+For best results getting help with configuration and troubleshooting, please use the following resources:

-->
+- RepRap.org Marlin Forum http://forums.reprap.org/list.php?415
+- Tom's 3D Forums https://discuss.toms3d.org/
+- Facebook Group "Marlin Firmware" https://www.facebook.com/groups/1049718498464482/
+- Facebook Group "Marlin Firmware for 3D Printers" https://www.facebook.com/groups/3Dtechtalk/
+- Marlin Configuration https://www.youtube.com/results?search_query=marlin+configuration on YouTube
+- Marlin Discord server. Join link: https://discord.gg/n5NJ59y

-### Description
-
-<!-- Description of the bug or requested feature -->
-
-### Steps to Reproduce
-
-<!-- If this is a Bug Report, please describe the steps needed to reproduce the issue -->
-
-1. [First Step]
-2. [Second Step]
-3. [and so on...]
-
-**Expected behavior:** [What you expect to happen]
-
-**Actual behavior:** [What actually happens]
-
-#### Additional Information
-
-* Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
-* Provide pictures or links to videos that clearly demonstrate the issue.
-* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
+After seeking help from the community, if the consensus points to to a bug in Marlin, then you should post a Bug Report at https://github.com/MarlinFirmware/Marlin/issues/new/choose).
--- a/.github/workflows/bad-target.md
+++ b/.github/workflows/bad-target.md
@@ -0,0 +1,7 @@
+Thanks for your contribution! Unfortunately we can't accept PRs directed at release branches. We make patches to the bugfix branches and only later do we push them out as releases.
+
+Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.
+
+It may help to set your fork's default branch to `bugfix-2.0.x`.
+
+See [this page](http://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.
--- a/.github/workflows/bump-date.yml
+++ b/.github/workflows/bump-date.yml
@@ -0,0 +1,34 @@
+#
+# bump-date.yml
+# Bump the distribution date once per day
+#
+
+name: Bump Distribution Date
+
+on:
+  schedule:
+    - cron: '0 0 * * *'
+
+jobs:
+  bump_date:
+
+    runs-on: ubuntu-latest
+
+    steps:
+
+    - name: Check out bugfix-2.0.x
+      uses: actions/checkout@v2
+      with:
+        ref: bugfix-2.0.x
+
+    - name: Bump Distribution Date
+      run: |
+        # Inline Bump Script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
+        DIST=$( date +"%Y-%m-%d" )
+        eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/src/inc/Version.h" && \
+        git config user.name "${GITHUB_ACTOR}" && \
+        git config user.email "${GITHUB_ACTOR}@users.noreply.github.com" && \
+        git add . && \
+        git commit -m "[cron] Bump distribution date ($DIST)" && \
+        git push
--- a/.github/workflows/check-pr.yml
+++ b/.github/workflows/check-pr.yml
@@ -0,0 +1,27 @@
+#
+# comment-pr.yml
+# Add a comment to any PR directed to a release branch
+#
+
+name: PR Bad Target
+
+on:
+  pull_request:
+    branches:
+    - 1.0.x
+    - 1.1.x
+    - 2.0.x
+
+jobs:
+  bad_target:
+
+    name: PR Bad Target
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v1
+      - uses: harupy/comment-on-pr@master
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        with:
+          filename: bad-target.md
--- a/.github/workflows/test-builds.yml
+++ b/.github/workflows/test-builds.yml
@@ -32,6 +32,7 @@ jobs:
        - megaatmega2560
        - teensy31
        - teensy35
+        - SAMD51_grandcentral_m4

        # Extended AVR Environments

@@ -75,7 +76,6 @@ jobs:
        #- mks_robin_lite
        #- mks_robin_mini
        #- mks_robin_nano
-        #- SAMD51_grandcentral_m4

    steps:

--- a/.gitignore
+++ b/.gitignore
@@ -1,6 +1,6 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
 # Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -146,6 +146,9 @@ Marlin/*/*/readme.txt
 Marlin/*/*/*/readme.txt
 Marlin/*/*/*/*/readme.txt

+# Secure Credentials
+Configuration_Secure.h
+
 #Visual Studio
 *.sln
 *.vcxproj
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -36,7 +36,7 @@
 * Advanced settings can be found in Configuration_adv.h
 *
 */
-#define CONFIGURATION_H_VERSION 020000
+#define CONFIGURATION_H_VERSION 020004

 //===========================================================================
 //============================= Getting Started =============================
@@ -379,7 +379,8 @@
 *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
 *    15 : 100k thermistor calibration for JGAurora A5 hotend
 *    18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327
- *    20 : Pt100 with circuit in the Ultimainboard V2.x
+ *    20 : Pt100 with circuit in the Ultimainboard V2.x with 5v excitation (AVR)
+ *    21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....)
 *   201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x
 *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
 *    61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
@@ -1064,12 +1065,14 @@

 // @section homing

-//#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
+//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed

-//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+//#define UNKNOWN_Z_NO_RAISE      // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.

-//#define Z_HOMING_HEIGHT 4  // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
-                             // Be sure you have this distance over your Z_MAX_POS in case.
+//#define Z_HOMING_HEIGHT  4      // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
+                                  // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding.
+
+//#define Z_AFTER_HOMING  10      // (mm) Height to move to after homing Z

 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
@@ -1231,6 +1234,7 @@
    #define MESH_TEST_HOTEND_TEMP  205    // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
    #define MESH_TEST_BED_TEMP      60    // (°C) Default bed temperature for the G26 Mesh Validation Tool.
    #define G26_XY_FEEDRATE         20    // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
+    #define G26_RETRACT_MULTIPLIER   1.0  // G26 Q (retraction) used by default between mesh test elements.
  #endif

 #endif
@@ -1310,10 +1314,10 @@
 //#define LEVEL_BED_CORNERS

 #if ENABLED(LEVEL_BED_CORNERS)
-  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
-  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
-  #define LEVEL_CORNERS_HEIGHT 0.0  // (mm) Z height of nozzle at leveling points
-  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+  #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
+  #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
+  #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
+  //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
 #endif

 /**
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -31,7 +31,7 @@
 * Basic settings can be found in Configuration.h
 *
 */
-#define CONFIGURATION_ADV_H_VERSION 020000
+#define CONFIGURATION_ADV_H_VERSION 020004

 // @section temperature

@@ -668,11 +668,37 @@
 */
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
-  // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
+  // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
+  // If not defined, probe limits will be used.
+  // Override with 'M422 S<index> X<pos> Y<pos>'
+  //#define Z_STEPPER_ALIGN_XY { {  10, 190 }, { 100,  10 }, { 190, 190 } }
+
+  /**
+   * Orientation for the automatically-calculated probe positions.
+   * Override Z stepper align points with 'M422 S<index> X<pos> Y<pos>'
+   *
+   * 2 Steppers:  (0)     (1)
+   *               |       |   2   |
+   *               | 1   2 |       |
+   *               |       |   1   |
+   *
+   * 3 Steppers:  (0)     (1)     (2)     (3)
+   *               |   3   | 1     | 2   1 |     2 |
+   *               |       |     3 |       | 3     |
+   *               | 1   2 | 2     |   3   |     1 |
+   *
+   * 4 Steppers:  (0)     (1)     (2)     (3)
+   *               | 4   3 | 1   4 | 2   1 | 3   2 |
+   *               |       |       |       |       |
+   *               | 1   2 | 2   3 | 3   4 | 4   1 |
+   *
+   */
+  #ifndef Z_STEPPER_ALIGN_XY
+    //#define Z_STEPPERS_ORIENTATION 0
+  #endif

  // Provide Z stepper positions for more rapid convergence in bed alignment.
-  // Currently requires triple stepper drivers.
+  // Requires triple stepper drivers (i.e., set NUM_Z_STEPPER_DRIVERS to 3)
  //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
    // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
@@ -680,23 +706,16 @@
    // Define one position per Z stepper in stepper driver order.
    #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
  #else
-    // Amplification factor. Used to scale the correction step up or down.
-    // In case the stepper (spindle) position is further out than the test point.
-    // Use a value > 1. NOTE: This may cause instability
-    #define Z_STEPPER_ALIGN_AMP 1.0
+    // Amplification factor. Used to scale the correction step up or down in case
+    // the stepper (spindle) position is farther out than the test point.
+    #define Z_STEPPER_ALIGN_AMP 1.0       // Use a value > 1.0 NOTE: This may cause instability!
  #endif

-  // Set number of iterations to align
-  #define Z_STEPPER_ALIGN_ITERATIONS 3
-
-  // Enable to restore leveling setup after operation
-  #define RESTORE_LEVELING_AFTER_G34
-
  // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
-  #define G34_MAX_GRADE  5  // (%) Maximum incline G34 will handle
-
-  // Stop criterion. If the accuracy is better than this stop iterating early
-  #define Z_STEPPER_ALIGN_ACC 0.02
+  #define G34_MAX_GRADE              5    // (%) Maximum incline that G34 will handle
+  #define Z_STEPPER_ALIGN_ITERATIONS 5    // Number of iterations to apply during alignment
+  #define Z_STEPPER_ALIGN_ACC        0.02 // Stop iterating early if the accuracy is better than this
+  #define RESTORE_LEVELING_AFTER_G34      // Restore leveling after G34 is done?
 #endif

 // @section motion
@@ -819,10 +838,10 @@
  // probing on a screwhead or hollow washer, probe near the edges.
  //#define CALIBRATION_MEASURE_AT_TOP_EDGES

-  // Define pin which is read during calibration
+  // Define the pin to read during calibration
  #ifndef CALIBRATION_PIN
-    #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop
-    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin
+    //#define CALIBRATION_PIN -1            // Define here to override the default pin
+    #define CALIBRATION_PIN_INVERTING false // Set to true to invert the custom pin
    //#define CALIBRATION_PIN_PULLDOWN
    #define CALIBRATION_PIN_PULLUP
  #endif
@@ -1314,9 +1333,11 @@
  //#define AO_EXP1_PINMAP    // AlephObjects CLCD UI EXP1 mapping
  //#define AO_EXP2_PINMAP    // AlephObjects CLCD UI EXP2 mapping
  //#define CR10_TFT_PINMAP   // Rudolph Riedel's CR10 pin mapping
+  //#define S6_TFT_PINMAP     // FYSETC S6 pin mapping
+
  //#define OTHER_PIN_LAYOUT  // Define pins manually below
  #if ENABLED(OTHER_PIN_LAYOUT)
-    // The pins for CS and MOD_RESET (PD) must be chosen.
+    // Pins for CS and MOD_RESET (PD) must be chosen
    #define CLCD_MOD_RESET  9
    #define CLCD_SPI_CS    10

@@ -1426,6 +1447,7 @@
 */
 //#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
+  //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
  //#define BABYSTEP_WITHOUT_HOMING
  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
@@ -1554,7 +1576,7 @@

  // Add additional compensation depending on hotend temperature
  // Note: this values cannot be calibrated and have to be set manually
-  #ifdef PROBE_TEMP_COMPENSATION
+  #if ENABLED(PROBE_TEMP_COMPENSATION)
    // Max temperature that can be reached by heated bed.
    // This is required only for the calibration process.
    #define PTC_MAX_BED_TEMP 110
@@ -2765,6 +2787,10 @@
 */
 #define FASTER_GCODE_PARSER

+#if ENABLED(FASTER_GCODE_PARSER)
+  //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
+#endif
+
 /**
 * CNC G-code options
 * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
@@ -3004,11 +3030,19 @@
 //#define ESP3D_WIFISUPPORT   // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib)

 #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
-  #define WIFI_SSID "Wifi SSID"
-  #define WIFI_PWD  "Wifi Password"
  //#define WEBSUPPORT          // Start a webserver (which may include auto-discovery)
  //#define OTASUPPORT          // Support over-the-air firmware updates
  //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
+
+  /**
+   * To set a default WiFi SSID / Password, create a file called Configuration_Secure.h with
+   * the following defines, customized for your network. This specific file is excluded via
+   * .gitignore to prevent it from accidentally leaking to the public.
+   *
+   *   #define WIFI_SSID "WiFi SSID"
+   *   #define WIFI_PWD  "WiFi Password"
+   */
+  //#include "Configuration_Secure.h" // External file with WiFi SSID / Password
 #endif

 /**
--- a/Marlin/Makefile
+++ b/Marlin/Makefile
@@ -180,88 +180,93 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+# MKS v1.6 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS GEN v1.3 or 1.4
+
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS GEN L
+# MKS GEN v1.3 or 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# zrib V2.0 control board (Chinese knock off RAMPS replica)
+# MKS GEN L
 else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# BigTreeTech or BIQU KFB2.0
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
  MCU ?= atmega1280

 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Raise3D Rumba
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Rapide Lite RL200 Rumba
+# Raise3D Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Formbot T-Rex 2 Plus
+# Rapide Lite RL200 Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# TriGorilla Anycubic version 1.4 Rev 1.1
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# Creality: Ender-4, CR-8
+# TriGorilla Anycubic version 1.4 Rev 1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# FYSETC F6
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Duplicator i3 Plus
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# VORON
+# FYSETC F6 1.5
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# TRONXY V3 1.0
+# Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# Z-Bolt X Series
+# VORON
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# TT OSCAR
+# TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Overlord/Overlord Pro
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# ADIMLab Gantry v1
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# ADIMLab Gantry v2
+# Overlord/Overlord Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# BIQU Tango V1
+# ADIMLab Gantry v1
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# MKS GEN L V2
+# ADIMLab Gantry v2
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+# BIQU Tango V1
+else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+# MKS GEN L V2
+else ifeq ($(HARDWARE_MOTHERBOARD),1149)

 #
 # RAMBo and derivatives
@@ -784,11 +789,11 @@ sym: $(BUILD_DIR)/$(TARGET).sym
 # Do not try to reset an Arduino if it's not one
 upload: $(BUILD_DIR)/$(TARGET).hex
 ifeq (${AVRDUDE_PROGRAMMER}, arduino)
-	stty hup < $(UPLOAD_PORT); true
+  stty hup < $(UPLOAD_PORT); true
 endif
-	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
+  $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
 ifeq (${AVRDUDE_PROGRAMMER}, arduino)
-	stty -hup < $(UPLOAD_PORT); true
+  stty -hup < $(UPLOAD_PORT); true
 endif

 # Display size of file.
@@ -796,10 +801,10 @@ HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
 ELFSIZE = $(SIZE)  $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
          $(SIZE)  $(BUILD_DIR)/$(TARGET).elf
 sizebefore:
-	$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
+  $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi

 sizeafter: build
-	$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
+  $P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi


 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
@@ -811,71 +816,71 @@ COFFCONVERT=$(OBJCOPY) --debugging \


 coff: $(BUILD_DIR)/$(TARGET).elf
-	$(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
+  $(COFFCONVERT) -O coff-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof


 extcoff: $(TARGET).elf
-	$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
+  $(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof


 .SUFFIXES: .elf .hex .eep .lss .sym .bin
 .PRECIOUS: .o

 .elf.hex:
-	$(Pecho) "  COPY  $@"
-	$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+  $(Pecho) "  COPY  $@"
+  $P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@

 .elf.bin:
-	$(Pecho) "  COPY  $@"
-	$P $(OBJCOPY) -O binary -R .eeprom $< $@
+  $(Pecho) "  COPY  $@"
+  $P $(OBJCOPY) -O binary -R .eeprom $< $@

 .elf.eep:
-	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+  -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@

 # Create extended listing file from ELF output file.
 .elf.lss:
-	$(OBJDUMP) -h -S $< > $@
+  $(OBJDUMP) -h -S $< > $@

 # Create a symbol table from ELF output file.
 .elf.sym:
-	$(NM) -n $< > $@
+  $(NM) -n $< > $@

 # Link: create ELF output file from library.

 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
-	$(Pecho) "  CXX   $@"
-	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+  $(Pecho) "  CXX   $@"
+  $P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)

 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"

 $(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CC    $<"
-	$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
+  $(Pecho) "  CC    $<"
+  $P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@

 $(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
+  $(Pecho) "  CXX   $<"
+  $P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@

 # Object files for Arduino libs will be created in $(BUILD_DIR)/arduino

 $(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CC    $<"
-	$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
+  $(Pecho) "  CC    $<"
+  $P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@

 $(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS)  $(LIBWARN) $< -o $@
+  $(Pecho) "  CXX   $<"
+  $P $(CXX) -MMD -c $(ALL_CXXFLAGS)  $(LIBWARN) $< -o $@

 $(BUILD_DIR)/arduino/%.o: %.S $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
+  $(Pecho) "  CXX   $<"
+  $P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@

 # Target: clean project.
 clean:
-	$(Pecho) "  RMDIR $(BUILD_DIR)/"
-	$P rm -rf $(BUILD_DIR)
+  $(Pecho) "  RMDIR $(BUILD_DIR)/"
+  $P rm -rf $(BUILD_DIR)


 .PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
--- a/Marlin/Version.h
+++ b/Marlin/Version.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -28,7 +28,7 @@
 /**
 * Marlin release version identifier
 */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+//#define SHORT_BUILD_VERSION "2.0.4.1"

 /**
 * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2019-07-10"
+//#define STRING_DISTRIBUTION_DATE "2020-01-31"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
--- a/Marlin/src/HAL/HAL.h
+++ b/Marlin/src/HAL/HAL.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/HAL.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/HAL.h
+++ b/Marlin/src/HAL/HAL_AVR/HAL.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -53,8 +53,8 @@
 //#define analogInputToDigitalPin(IO) IO

 #ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
-  #define CRITICAL_SECTION_END    SREG = _sreg
+  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END()    SREG = _sreg
 #endif
 #define ISRS_ENABLED() TEST(SREG, SREG_I)
 #define ENABLE_ISRS()  sei()
--- a/Marlin/src/HAL/HAL_AVR/HAL_SPI.cpp
+++ b/Marlin/src/HAL/HAL_AVR/HAL_SPI.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
+++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/MarlinSerial.h
+++ b/Marlin/src/HAL/HAL_AVR/MarlinSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/Servo.cpp
+++ b/Marlin/src/HAL/HAL_AVR/Servo.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/ServoTimers.h
+++ b/Marlin/src/HAL/HAL_AVR/ServoTimers.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_AVR/endstop_interrupts.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp
+++ b/Marlin/src/HAL/HAL_AVR/fast_pwm.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio.cpp
+++ b/Marlin/src/HAL/HAL_AVR/fastio.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h
+++ b/Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -60,6 +60,6 @@
  #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif

-#if TMC_HAS_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
+#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
  #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
--- a/Marlin/src/HAL/HAL_AVR/math.h
+++ b/Marlin/src/HAL/HAL_AVR/math.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
+++ b/Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h
+++ b/Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_AVR/spi_pins.h
+++ b/Marlin/src/HAL/HAL_AVR/spi_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/watchdog.cpp
+++ b/Marlin/src/HAL/HAL_AVR/watchdog.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_AVR/watchdog.h
+++ b/Marlin/src/HAL/HAL_AVR/watchdog.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/DebugMonitor.cpp
+++ b/Marlin/src/HAL/HAL_DUE/DebugMonitor.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
+++ b/Marlin/src/HAL/HAL_DUE/EepromEmulation.cpp
@@ -1,3 +1,24 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */

 /* EEPROM emulation over flash with reduced wear
 *
--- a/Marlin/src/HAL/HAL_DUE/HAL.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_DUE/HAL.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL.h
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
@@ -119,8 +119,8 @@ typedef int8_t pin_t;
 //
 // Interrupts
 //
-#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
+#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
--- a/Marlin/src/HAL/HAL_DUE/HAL_SPI.cpp
+++ b/Marlin/src/HAL/HAL_DUE/HAL_SPI.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/InterruptVectors.cpp
+++ b/Marlin/src/HAL/HAL_DUE/InterruptVectors.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
  memcpy(&ram_tab, romtab, sizeof(ram_tab));

  // Disable global interrupts
-  CRITICAL_SECTION_START;
+  CRITICAL_SECTION_START();

  // Set the vector table base address to the SRAM copy
  SCB->VTOR = (uint32_t)(&ram_tab);

  // Reenable interrupts
-  CRITICAL_SECTION_END;
+  CRITICAL_SECTION_END();

  // Return the address of the table
  return (pfnISR_Handler*)(&ram_tab);
@@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  pfnISR_Handler *isrtab = get_relocated_table_addr();

  // Disable global interrupts
-  CRITICAL_SECTION_START;
+  CRITICAL_SECTION_START();

  // Get the original handler
  pfnISR_Handler oldHandler = isrtab[irq + 16];
@@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  isrtab[irq + 16] = newHandler;

  // Reenable interrupts
-  CRITICAL_SECTION_END;
+  CRITICAL_SECTION_END();

  // Return the original one
  return oldHandler;
--- a/Marlin/src/HAL/HAL_DUE/InterruptVectors.h
+++ b/Marlin/src/HAL/HAL_DUE/InterruptVectors.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerial.h
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.cpp
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.h
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/Servo.cpp
+++ b/Marlin/src/HAL/HAL_DUE/Servo.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/Tone.cpp
+++ b/Marlin/src/HAL/HAL_DUE/Tone.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
+++ b/Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_DUE/endstop_interrupts.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/fastio.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -56,6 +56,6 @@
  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif

-#if TMC_HAS_SW_SERIAL
+#if HAS_TMC_SW_SERIAL
  #error "TMC220x Software Serial is not supported on this platform."
 #endif
--- a/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp
+++ b/Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
--- a/Marlin/src/HAL/HAL_DUE/pinsDebug.h
+++ b/Marlin/src/HAL/HAL_DUE/pinsDebug.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Marlin/src/HAL/HAL_DUE/spi_pins.h
+++ b/Marlin/src/HAL/HAL_DUE/spi_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/timers.cpp
+++ b/Marlin/src/HAL/HAL_DUE/timers.cpp
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
--- a/Marlin/src/HAL/HAL_DUE/timers.h
+++ b/Marlin/src/HAL/HAL_DUE/timers.h
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_DUE/watchdog.cpp
+++ b/Marlin/src/HAL/HAL_DUE/watchdog.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_DUE/watchdog.h
+++ b/Marlin/src/HAL/HAL_DUE/watchdog.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.h
+++ b/Marlin/src/HAL/HAL_ESP32/FlushableHardwareSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/HAL.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/HAL.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -172,6 +172,12 @@ void HAL_adc_init() {
  #if HAS_TEMP_ADC_5
    adc1_set_attenuation(get_channel(TEMP_5_PIN), ADC_ATTEN_11db);
  #endif
+  #if HAS_TEMP_ADC_6
+    adc2_set_attenuation(get_channel(TEMP_6_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_7
+    adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db);
+  #endif
  #if HAS_HEATED_BED
    adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db);
  #endif
--- a/Marlin/src/HAL/HAL_ESP32/HAL.h
+++ b/Marlin/src/HAL/HAL_ESP32/HAL.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -65,8 +65,8 @@ extern portMUX_TYPE spinlock;
  #define NUM_SERIAL 1
 #endif

-#define CRITICAL_SECTION_START portENTER_CRITICAL(&spinlock)
-#define CRITICAL_SECTION_END   portEXIT_CRITICAL(&spinlock)
+#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
+#define CRITICAL_SECTION_END()   portEXIT_CRITICAL(&spinlock)
 #define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
 #define ENABLE_ISRS()  if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
 #define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
--- a/Marlin/src/HAL/HAL_ESP32/HAL_SPI.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/HAL_SPI.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/Servo.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/Servo.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/Servo.h
+++ b/Marlin/src/HAL/HAL_ESP32/Servo.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h
+++ b/Marlin/src/HAL/HAL_ESP32/WebSocketSerial.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h
+++ b/Marlin/src/HAL/HAL_ESP32/endstop_interrupts.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/fastio.h
+++ b/Marlin/src/HAL/HAL_ESP32/fastio.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/i2s.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/i2s.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -153,8 +153,8 @@ void stepperTask(void* parameter) {
        remaining--;
      }
      else {
-        Stepper::stepper_pulse_phase_isr();
-        remaining = Stepper::stepper_block_phase_isr();
+        Stepper::pulse_phase_isr();
+        remaining = Stepper::block_phase_isr();
      }
    }
  }
@@ -308,7 +308,7 @@ int i2s_init() {
  esp_intr_enable(i2s_isr_handle);

  // Create the task that will feed the buffer
-  xTaskCreate(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr);
+  xTaskCreatePinnedToCore(stepperTask, "StepperTask", 10000, nullptr, 1, nullptr, CONFIG_ARDUINO_RUNNING_CORE); // run I2S stepper task on same core as rest of Marlin

  // Route the i2s pins to the appropriate GPIO
  gpio_matrix_out_check(I2S_DATA, I2S0O_DATA_OUT23_IDX, 0, 0);
--- a/Marlin/src/HAL/HAL_ESP32/i2s.h
+++ b/Marlin/src/HAL/HAL_ESP32/i2s.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_LCD.h
+++ b/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_LCD.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_adv.h
+++ b/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_adv.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_post.h
+++ b/Marlin/src/HAL/HAL_ESP32/inc/Conditionals_post.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/inc/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_ESP32/inc/SanityCheck.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -29,7 +29,7 @@
  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif

-#if TMC_HAS_SW_SERIAL
+#if HAS_TMC_SW_SERIAL
  #error "TMC220x Software Serial is not supported on this platform."
 #endif

--- a/Marlin/src/HAL/HAL_ESP32/ota.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/ota.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_ESP32/ota.h
+++ b/Marlin/src/HAL/HAL_ESP32/ota.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
--- a/Marlin/src/HAL/HAL_ESP32/persistent_store_impl.cpp
+++ b/Marlin/src/HAL/HAL_ESP32/persistent_store_impl.cpp
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/servotimers.h
+++ b/Marlin/src/HAL/HAL_ESP32/servotimers.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
--- a/Marlin/src/HAL/HAL_ESP32/spi_pins.h
+++ b/Marlin/src/HAL/HAL_ESP32/spi_pins.h
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Scott Lahteine	c41f3f8582	Version 2.0.4.1 Release	2020-02-22 07:02:55 -06:00
Scott Lahteine	8670df08a2	CoreXY Babystepping hotfix	2020-02-22 07:02:55 -06:00
Scott Lahteine	730690ea03	Hotfix for Babystepping	2020-02-22 02:55:26 -06:00
Scott Lahteine	3543873da7	Use moves_free in ok_to_send	2020-02-22 02:55:26 -06:00
thinkyhead	c505626c42	[cron] Bump distribution date (2020-02-22)	2020-02-22 02:55:26 -06:00
Scott Lahteine	7e8505fc11	Version 2.0.4 Release	2020-02-21 08:38:14 -06:00
Scott Lahteine	f9aec2685c	Merge remote-tracking branch 'upstream/bugfix-2.0.x' into 2.0.x	2020-02-21 08:37:02 -06:00
Scott Lahteine	5d16497bed	Tweak pins spacing, comments	2020-02-21 08:33:11 -06:00
ellensp	9f53bbd791	Add PICA shields support (#16891 )	2020-02-21 08:27:32 -06:00
Jamie	e1d367e05a	Fix EEPROM errors with EXTRUDERS == 0 (#16898 )	2020-02-21 07:42:13 -06:00
Karl Andersson	f30897500d	Disable spreadcycle in tmc_enable_stallguard<2209> (#16890 )	2020-02-21 07:40:55 -06:00
Tanguy Pruvot	68de12acbf	Followup to autoreport patch (#16914 ) See `a1f026f57a`	2020-02-21 07:36:59 -06:00
Scott Lahteine	6320f9795c	More EEPROM cleanup	2020-02-20 20:56:13 -06:00
Scott Lahteine	22b974691e	Tweak process_line_done for speed	2020-02-20 20:36:51 -06:00
Scott Lahteine	4ef627d79f	Add a note on EEPROM todo	2020-02-20 20:36:50 -06:00
Scott Lahteine	19991e269b	Show end prompt with Print Event LEDs	2020-02-20 20:36:50 -06:00
Scott Lahteine	b8b225c8b5	Function for CONFIG_ECHO_HEADING	2020-02-20 20:36:50 -06:00
Scott Lahteine	a1f026f57a	Inline manage_inactivity, tweak autoreport_paused	2020-02-20 20:36:50 -06:00
Scott Lahteine	2b788e9aa6	Single envs for specific boards	2020-02-20 20:20:15 -06:00
thinkyhead	140e4ac507	[cron] Bump distribution date (2020-02-21)	2020-02-21 00:03:41 +00:00
Robby Candra	1c52d76668	Serial redirect for Move Command when stopping (#16906 )	2020-02-20 02:22:07 -06:00
thinkyhead	178735b958	[cron] Bump distribution date (2020-02-20)	2020-02-20 00:03:52 +00:00
thinkyhead	4c179ba3f7	[cron] Bump distribution date (2020-02-19)	2020-02-19 00:03:54 +00:00
thinkyhead	05f51e9355	[cron] Bump distribution date (2020-02-18)	2020-02-18 00:03:31 +00:00
thinkyhead	75e3aa12c5	[cron] Bump distribution date (2020-02-17)	2020-02-17 00:03:58 +00:00
Scott Lahteine	99a5074372	Fix babystep include, typos in stepper.cpp Fix #16881	2020-02-16 17:49:21 -06:00
vivian-ng	4c6f695bea	Put ESP32 I2S stepper task and Marlin on the same core (#16874 )	2020-02-16 16:44:36 -06:00
Tanguy Pruvot	8bc3e63871	Update French language (#16877 )	2020-02-16 16:39:17 -06:00
Scott Lahteine	4d400910b4	Fix mftest -b -u line match	2020-02-16 15:30:20 -06:00
Giuliano Zaro	42208bc031	Fix unknown command on empty lines (#16867 )	2020-02-16 01:10:20 -06:00
Giuliano Zaro	199a1ba0e5	Move SAMD51 Temperature timer to RTC (#16868 )	2020-02-15 22:45:52 -06:00
Scott Lahteine	4360142bd1	Defer updated ADC	2020-02-15 22:37:16 -06:00
Scott Lahteine	ddce1c6ef2	Show '*' for zero 'stst' flag	2020-02-15 22:35:28 -06:00
Scott Lahteine	72fae2faa5	Require TMCStepper 0.6.2	2020-02-15 22:35:28 -06:00
Scott Lahteine	64a81f887a	EXPERIMENTAL integrated BABYSTEPPING (#16829 )	2020-02-15 21:42:28 -06:00
Scott Lahteine	64b96f3908	Double ADC read frequency (#16864 )	2020-02-15 19:10:46 -06:00
thinkyhead	52a1268089	[cron] Bump distribution date (2020-02-16)	2020-02-16 00:04:09 +00:00
Scott Lahteine	5584da388c	Conceal float rounding errors on display Fix #16866	2020-02-15 02:55:41 -06:00
Scott Lahteine	efdaf940a5	Fix byte-to-percent display Fixes #16866	2020-02-15 02:37:13 -06:00
Scott Lahteine	71ec89a112	Fix mftest -b and -u. Add --help.	2020-02-15 01:47:15 -06:00
Scott Lahteine	1087e318e5	Fix a BORG compile warning	2020-02-15 01:47:15 -06:00
thinkyhead	150237f712	[cron] Bump distribution date (2020-02-15)	2020-02-15 00:03:59 +00:00
George Fu	63dd0f249d	Fysetc S6 pins / LCD updates (#16830 )	2020-02-14 07:18:57 -06:00
Scott Lahteine	0b984519c3	Clean up stepper and babystep (#16857 )	2020-02-14 05:14:37 -06:00
Scott Lahteine	073e4443e8	Optimize "Dismiss" string	2020-02-14 00:05:06 -06:00
Scott Lahteine	00ba053c90	Clean up host actions code (#16856 )	2020-02-13 23:39:27 -06:00
Giuliano Zaro	ff0c931e47	Add RAMPS 1.4.4 to AGCM4 (#16606 )	2020-02-13 23:28:18 -06:00
vivian-ng	a16f3baecc	Add ESPAsyncTCP to lib_ignore (#16844 )	2020-02-13 23:22:52 -06:00
Scott Lahteine	49a66bc4cc	Fix ESP32 warning, specify supported version	2020-02-13 19:22:13 -06:00
Scott Lahteine	f3f692adf7	Don't assert safe homing for delta/scara	2020-02-13 19:22:13 -06:00
Robby Candra	af84e362cc	Remove unused queue.stopped_N (#16850 )	2020-02-13 18:59:32 -06:00
Gaston Dombiak	082117c4bb	Ping the job timer in M140 (#16849 )	2020-02-13 18:43:47 -06:00
Giuliano Zaro	0e17d10bf3	Fix G-code line parsing (#16840 )	2020-02-13 18:30:47 -06:00
thinkyhead	68077149e2	[cron] Bump distribution date (2020-02-14)	2020-02-14 00:04:13 +00:00
thinkyhead	62d7d49719	[cron] Bump distribution date (2020-02-13)	2020-02-13 00:03:34 +00:00
Scott Lahteine	1d8d91afc6	No limit needed on this raise Remove an extraneous limit from #16811.	2020-02-12 14:57:11 -06:00
Robby Candra	a83ad2d9d4	Define MarlinSerial instances for DGUS (#16841 )	2020-02-11 20:30:20 -06:00
thinkyhead	0306c1bb0c	[cron] Bump distribution date (2020-02-12)	2020-02-12 00:03:54 +00:00
Giuliano Zaro	4a733796bd	Prevent pin glitches on out commutation (#16835 ) Better for switching from pulled input to output and also set real output (with no input enabled).	2020-02-11 10:43:28 -06:00
Scott Lahteine	0fd0554b5f	Simplify old safe homing sanity check	2020-02-11 10:07:45 -06:00
Scott Lahteine	fa6e7cb733	Function-style critical section macros	2020-02-11 09:37:04 -06:00
Scott Lahteine	7b02a62da8	Fix up tests	2020-02-11 09:37:04 -06:00
Scott Lahteine	189c101793	Use prior babystep delay method (#16833 )	2020-02-11 08:52:11 -06:00
Scott Lahteine	1c556cd90d	Recommend Z Safe Homing Co-Authored-By: Vertabreaker <opyrus@hotmail.com>	2020-02-11 07:40:37 -06:00
Scott Lahteine	e442663e2a	No Z sensorless req'd if homing with probe Fixes #16674	2020-02-11 04:15:25 -06:00
Scott Lahteine	71539bcbeb	Undo driver type auto-assignment for now Good general concept but needs more time to develop and group with a stepper suite.	2020-02-11 02:32:01 -06:00
Giuliano Zaro	d5790e09a5	Update SAMD51 EEPROM repo link (#16832 )	2020-02-11 02:05:58 -06:00
thinkyhead	b26f7fca3f	[cron] Bump distribution date (2020-02-11)	2020-02-11 00:04:03 +00:00
Scott Lahteine	2836834d7e	Unify step pulse timing of ISR / babystep (#16813 )	2020-02-10 16:58:21 -06:00
darksiah	d8b2726fd3	Fix MKS Robin Nano platformio.ini entry (#16826 )	2020-02-10 16:49:36 -06:00
proferabg	3f87f912c5	Enable hotend / bed PID separately in ExtUI (#16827 )	2020-02-10 16:48:22 -06:00
Scott Lahteine	dd6a7ca197	Fix out-of-order M0 after SD printing Fixes #14774 Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>	2020-02-10 16:36:31 -06:00
Scott Lahteine	fa4a6cdb5c	Fix out-of-order M0 after SD printing Fixes #14774 Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>	2020-02-10 16:33:40 -06:00
Scott Lahteine	3bef7a4450	Add g-code quoted strings, improve stream code (#16818 )	2020-02-10 14:52:15 -06:00
Daniel Mazurkiewicz	e561f744fa	Update MKS BASE and v1.6 pins (#16806 )	2020-02-10 14:12:11 -06:00
Scott Lahteine	0b45493557	Add a caution to drivers.h	2020-02-09 21:58:12 -06:00
Scott Lahteine	18a7276909	Revert "Coolstep for TMC2130, 2209, 5130, 5160" Reverting #16790 as not ready for primetime.	2020-02-09 21:22:26 -06:00
Scott Lahteine	28b48fc9bb	Revert change to AXIS_DRIVER_TYPE_X2 - Revisit this to figure out why it breaks	2020-02-09 20:49:55 -06:00
Scott Lahteine	10b4fa91eb	Add mftest -b (auto-build) and -u (upload) - Implement the equivalent of auto-build for the shell environment by using the MOTHERBOARD setting to look up the env: entries.	2020-02-09 20:48:20 -06:00
Scott Lahteine	a33d08928a	Tweak LPC1768 upload py script	2020-02-09 20:48:20 -06:00
thinkyhead	15e6ee6c7c	[cron] Bump distribution date (2020-02-10)	2020-02-10 00:03:46 +00:00
InsanityAutomation	a9549f7a08	Add PID, probe offsets to ExtUI (#16792 )	2020-02-09 12:22:53 -06:00
InsanityAutomation	cc1ff27256	Bump config version to 020004 (#16816 )	2020-02-09 12:15:02 -06:00
Scott Lahteine	0ce83dee95	Show print time with PRINTER_EVENT_LEDS	2020-02-09 11:37:43 -06:00
Scott Lahteine	38873596ec	Tweak parser warning	2020-02-09 11:37:43 -06:00
Scott Lahteine	ffcbba4447	Move MSG_MARLIN	2020-02-09 11:37:43 -06:00
Scott Lahteine	b9b07387d7	Minor HAL cleanup	2020-02-09 11:12:38 -06:00
Giuliano Zaro	90e2c42031	Adafruit Grand Central M4 fixes (#16812 )	2020-02-09 09:57:22 -06:00
InsanityAutomation	84b6e11bd5	Better probe fail handling (#16811 )	2020-02-09 07:46:38 -06:00
Fabio Santos	894762259b	Coolstep for TMC2130, 2209, 5130, 5160 (#16790 )	2020-02-08 21:01:57 -06:00
thinkyhead	f0cbc85a07	[cron] Bump distribution date (2020-02-09)	2020-02-09 00:03:30 +00:00
Scott Lahteine	130e36d766	Tweak ABL logging, document probing	2020-02-08 17:47:54 -06:00
Scott Lahteine	5d3cfbdc9b	Add .editorconfig file	2020-02-08 17:43:25 -06:00
Scott Lahteine	f55abfeb95	Clean up Makefle indentation	2020-02-08 17:43:00 -06:00
thinkyhead	38bf5523e1	[cron] Bump distribution date (2020-02-08)	2020-02-08 00:02:22 +00:00
thinkyhead	12b3807a7f	[cron] Bump distribution date (2020-02-07)	2020-02-07 00:02:48 +00:00
Robert Stein	3a3429b1ef	Fix probe with multi-endstops (#16793 )	2020-02-06 15:28:46 -06:00
Robby Candra	86812432f3	Remove extraneous Serial init (#16794 )	2020-02-06 14:11:49 -06:00
Tanguy Pruvot	54aff83179	G26: Allow to set retraction for UBL mesh test (#16511 )	2020-02-05 20:33:39 -06:00
Bob Kuhn	78fea4a9ca	Split up MKS_RUMBA32 into two variants (#16781 )	2020-02-05 20:28:28 -06:00
thinkyhead	bb68eaa69e	[cron] Bump distribution date (2020-02-06)	2020-02-06 00:02:49 +00:00
Scott Lahteine	62b9d7dc73	Direct link to version configs	2020-02-05 00:47:24 -06:00
Scott Lahteine	00d71ff0eb	Direct download link for configs	2020-02-05 00:45:43 -06:00
thisiskeithb	9b4192cdd0	Add MKS Base 1.6 board (#16783 )	2020-02-04 23:21:05 -06:00
thinkyhead	0ebd2f44d4	[cron] Bump distribution date (2020-02-05)	2020-02-05 00:02:59 +00:00
Scott Lahteine	f312ddfa4f	More updates for 8 extruders, REPEAT	2020-02-04 12:37:20 -06:00
Scott Lahteine	d83382eb55	Add "PR Bad Target" workflow action	2020-02-04 09:41:26 -06:00
Scott Lahteine	793939a365	Upgrade an ifdef	2020-02-04 08:46:37 -06:00
Scott Lahteine	7bf2190f03	Fix CALIBRATION_GCODE pin handling	2020-02-04 08:32:43 -06:00
Scott Lahteine	081ef46e76	Fix Arduino IDE compile for DUE Fixes #16767	2020-02-04 08:32:20 -06:00
Scott Lahteine	15b6ad41bc	Fix E stepper stays on bug Fixes #16753	2020-02-04 02:39:37 -06:00
Bob Kuhn	0268c1d02c	STM32duino - Use SDIO for onboard SD (#16756 )	2020-02-04 01:24:11 -06:00
felixstorm	38a9706e16	Keep secure credentials in a separate config file (#16773 )	2020-02-03 23:29:01 -06:00
InsanityAutomation	62d9e3f50e	Force T0 in UBL G29 on all multi-hotend setups (#16774 )	2020-02-03 20:58:44 -06:00
Scott Lahteine	3ded99b894	[cron] Bump distribution date	2020-02-03 19:53:30 -06:00
Scott Lahteine	4c76314c26	Scheduled action to bump the date on bugfix-2.0.x	2020-02-03 19:31:41 -06:00
felixstorm	f1dbfaf706	Fix warning for ESP32 (#16771 )	2020-02-03 18:36:51 -06:00
ellensp	7d4fa9d504	Fix LCD Z Move character LCD display line (#16772 )	2020-02-03 18:35:06 -06:00
Scott Lahteine	64ab254f26	Use a different Configurations branch for CI	2020-02-03 18:11:52 -06:00
Scott Lahteine	ff78f79762	Use a different Configurations branch for CI	2020-02-03 18:06:04 -06:00
Scott Lahteine	202840e750	Tweak mfqp script	2020-02-03 08:33:35 -06:00
Scott Lahteine	bfad23d3e2	(c) 2020	2020-02-03 08:00:57 -06:00
Scott Lahteine	7f9c62437e	Corner Leveling: Add inset for each side (#16759 )	2020-02-03 00:00:35 -06:00
Scott Lahteine	72b4d91d2e	Add Z_AFTER_HOMING to raise Z more in G28 (#16755 )	2020-02-02 00:02:30 -06:00
Scott Lahteine	ee6003be87	Revert breaking change to _FAN_PWM macro	2020-02-01 23:07:20 -06:00
Scott Lahteine	4716dac874	Apply REPEAT, RREPEAT, and loop macros (#16757 )	2020-02-01 21:00:53 -06:00
Scott Lahteine	0e72c315a0	Minor string storage optimization	2020-02-01 20:29:31 -06:00
Scott Lahteine	4937519d51	Fix LPC build with USE_WATCHDOG off	2020-02-01 20:29:31 -06:00
Scott Lahteine	63469ed8f7	Add EXP labels to SKR pins	2020-02-01 19:06:32 -06:00
Scott Lahteine	22556a7bbf	More 8-extruder fixups	2020-02-01 15:19:58 -06:00
Scott Lahteine	c4cbc54484	Suppress a compile warning	2020-02-01 10:38:07 -06:00
Scott Lahteine	7a4758a6a2	Fix RGB / Neopixel white color bug See #16752	2020-02-01 10:11:36 -06:00
Scott Lahteine	995a9238b3	Probe singleton patch Followup to #16751	2020-02-01 07:57:10 -06:00
Scott Lahteine	5296af94d2	Drop obsolete SD special char handling See #14035	2020-02-01 06:49:56 -06:00
Scott Lahteine	0d342bac51	Fix CURRENT_STEP_DOWN compile error	2020-02-01 06:27:17 -06:00
Acenotass	832d33ce9d	Update Russian language (#16750 )	2020-02-01 04:53:18 -06:00
Jason Smith	c3cab37d7e	Fix Temperature::over_autostart_threshold (#16749 )	2020-02-01 04:51:57 -06:00
InsanityAutomation	e58d1bf974	G34 automatic point assignment (#16473 )	2020-02-01 04:50:44 -06:00
Scott Lahteine	90b6324563	Encapsulate probe as singleton class (#16751 )	2020-02-01 04:21:36 -06:00
Scott Lahteine	43d3463d5d	Misc cleanup, whitespace	2020-02-01 03:50:42 -06:00
Scott Lahteine	e64b7a3ab2	Clean up i2c encoder, sanitize serial	2020-02-01 00:57:14 -06:00
Scott Lahteine	1af05797d7	Improve mfadd helper script - Use the original branch name if none is supplied - Set the remote tracking to the source - Accept User/Branch or User:Branch syntax	2020-02-01 00:46:22 -06:00
Jason Smith	9a8de23858	Consistent M112 with Emergency Parser (#16747 )	2020-01-31 23:08:37 -06:00
Jason Smith	5b3d968634	Option for Trigorilla 1.4 with add-on endstops board (#16737 )	2020-01-31 21:51:59 -06:00
rebel1	300b81bfcb	Fix BTT SKR 1.4 extra endstop pins (#16738 )	2020-01-31 21:46:02 -06:00
Acenotass	0a6ae664bd	Update Russian language (#16745 )	2020-01-31 21:43:44 -06:00
Scott Lahteine	c4df5cf9a6	Include macros for delta ABC	2020-01-31 04:40:33 -06:00
Scott Lahteine	e6a7be922b	Version 2.0.3	2020-01-31 04:24:05 -06:00
Scott Lahteine	1525c2530e	Merge commit 'dabf3939209fd8ea7f6a6327d764c16743aa22aa' into look_at_201	2020-01-31 04:23:45 -06:00
Scott Lahteine	016e4c0193	Version 2.0.2	2020-01-31 04:22:34 -06:00
Scott Lahteine	be642610ae	Merge commit '8bd6b60a0141fa892984f2d5b61f06eadbbf9a5f' into look_at_201	2020-01-31 04:22:09 -06:00
Scott Lahteine	02f61832c0	Add sanity-check for new Advanced Pause option Followup to #16372	2020-01-30 23:24:40 -06:00
thinkyhead	dabf393920	[cron] Bump distribution date (2020-01-31)	2020-01-31 00:06:46 +00:00
Artur Petrzak	e4679c1b78	(21) PT100 for MCUs with 3.3v logic (#16731 )	2020-01-30 18:00:37 -06:00
Scott Lahteine	62f52ebb3a	Fix up, improve endstop pin auto-assignment Followup for #16723	2020-01-30 14:09:33 -06:00
Scott Lahteine	e8e25b80d1	Extend RX/TX pins for up to 8 extruders	2020-01-30 13:29:19 -06:00
Robert Stein	2822c0890a	Set up DIAG endstops for BTT SKR 1.4 / 1.4 Turbo (#16727 )	2020-01-30 13:17:15 -06:00
Alexander Gavrilenko	c45d6b2017	Simultaneous use of rotary encoder and touch buttons (#16729 )	2020-01-30 12:29:30 -06:00
felixstorm	8d4dd88bf9	Fix compile error in SdVolume on ESP32 (#16728 )	2020-01-30 12:22:42 -06:00
Scott Lahteine	3c9464eea4	Tweak G60/G61 slots	2020-01-30 03:25:40 -06:00
Scott Lahteine	5b12627e14	Auto assign DIAG pins for multi-endstop (#16723 )	2020-01-30 03:24:57 -06:00
Scott Lahteine	9caf5c05e7	Refactor heater watch, job timer auto-start (#16725 )	2020-01-30 03:24:43 -06:00
Scott Lahteine	50889c0f94	Move L64XX index_to_axis to progmem (#16697 )	2020-01-30 03:24:23 -06:00
chgi	99b6a132bc	Fix G60/G61 slots > 8 and compile error (#16715 )	2020-01-30 03:18:45 -06:00
Radek Pietruszewski	e6a675e6ec	Fix missing string for M48 build (#16708 )	2020-01-30 03:13:31 -06:00
Mauro	1bc6509d02	Support for E4d@BOX mainboard (#16716 )	2020-01-30 03:06:17 -06:00
Neskik	1db9d9f76f	Fix probe temp calibration (#16718 )	2020-01-30 03:00:38 -06:00
0r31	8737c35ded	Fix HAS_FAN macro (#16717 )	2020-01-29 22:48:26 -06:00
Scott Lahteine	e8ed4329ea	Cleanup of old includes, add comments	2020-01-29 22:41:18 -06:00
thinkyhead	a5f72330fb	[cron] Bump distribution date (2020-01-30)	2020-01-30 00:06:48 +00:00
InsanityAutomation	9bb8176d34	Fix Toolchange (!no_move) return to status (#16699 )	2020-01-29 00:06:06 -06:00
thinkyhead	9b45f342ee	[cron] Bump distribution date (2020-01-29)	2020-01-29 00:07:02 +00:00
felixstorm	e4eaf32b4d	Prevent SD access from resetting ESP32 (#16690 )	2020-01-27 18:16:43 -06:00
thinkyhead	0c3cae59d9	[cron] Bump distribution date (2020-01-28)	2020-01-28 00:06:59 +00:00
Jason Smith	131acf304b	Fix Manual Bed Leveling with multiple extruders (#16688 )	2020-01-27 15:57:21 -06:00
Scott Lahteine	8bd6b60a01	Remove extraneous G60/G61 lines	2020-01-27 15:40:25 -06:00
Scott Lahteine	ee17051933	Version 2.0.1	2020-01-13 16:49:49 -06:00
Scott Lahteine	0673f335e1	Merge remote-tracking branch 'upstream/bugfix-2.0.x' into 2.0.x	2019-12-24 00:05:04 -06:00
Scott Lahteine	ac7ee4b94a	Release version 2.0.0	2019-12-22 18:03:36 -06:00