Ronald f303129fb6 Changed 1284p fuse setting for 8, 16 and 20 Mhz ...

Symtopns:

- X axis move in one direction
- limit switches fail to trigger
- unable to reprogram the device via bootloader
- stops working when the reset switch is pressed.
- device fails to bootup when power by a slow raise power supply.

Solution:
- Disabled the jtag
- set the correct clock selection bit
- set the correct bootloader memory size
- enable brown-out setting
- enable clock power up delay

2014-02-02 13:13:15 +00:00

2.9 KiB

Raw Blame History

View Raw