12 KiB
12 KiB
Personal dwl Configuration
Welcome
My personal configuration of dwl, written as an Org Mode document.
Run the block below with C-c C-c to tangle code blocks to config file.
(org-mode-restart)
(org-babel-tangle)After making changes, run the following in a terminal to recompile.
sudo make clean installdwl - dwm for Wayland
See Upstream README for details on project.
Patches
Attach Top
This is a port of attachtop patch for dwm: https://dwm.suckless.org/patches/attachtop
New client attaches below the last master/on top of the stack.
Behavior feels very intuitive as it doesn't disrupt existing masters no matter the amount of them, it only pushes the clients in stack down.
#define ATTACHTOP_PATCH 1Auto Start
Allow dwl to execute commands from autostart array in your config.h file. And when you exit dwl all processes from autostart array will be killed.
Note: Commands from array are executed using execvp(). So if you need to execute shell command you need to prefix it with "sh", "-c" (change sh to any shell you like).
#define AUTOSTART_PATCH 1Warp Cursor
Warp cursor to the centre of newly focused clients.
Only moves the cursor if the cursor is currently not on the new client.
This is my version of the orphaned cursorwarp patch except I left out the config flag as I think it is unnecessary.
#define WARPCURSOR_PATCH 1dwl Configuration
Taken from https://github.com/djpohly/dwl/issues/466.
Appearance
#define COLOR(hex) { ((hex >> 24) & 0xFF) / 255.0f, \
((hex >> 16) & 0xFF) / 255.0f, \
((hex >> 8) & 0xFF) / 255.0f, \
(hex & 0xFF) / 255.0f }static const int sloppyfocus = 1; /* focus follows mouse */
static const int bypass_surface_visibility = 0; /* 1 means idle inhibitors will disable idle tracking even if it's surface isn't visible */
static const unsigned int borderpx = 2; /* border pixel of windows */
static const float rootcolor[] = COLOR(0x282a36ff);
static const float bordercolor[] = COLOR(0x4d4d4dff);
static const float focuscolor[] = COLOR(0xbd93f9ff);
static const float urgentcolor[] = COLOR(0xff5555ff);
/* This conforms to the xdg-protocol. Set the alpha to zero to restore the old behavior */
static const float fullscreen_bg[] = {0.1f, 0.1f, 0.1f, 1.0f}; /* You can also use glsl colors */Tagging
/* tagging - TAGCOUNT must be no greater than 31 */
#define TAGCOUNT (9)Logging
static int log_level = WLR_ERROR;Autostart
#if AUTOSTART_PATCH
static const char *const autostart[] = {
"/usr/bin/shikane", NULL,
"/usr/bin/bash", "/home/sravan/.azotebg", NULL,
"/usr/libexec/polkit-gnome-authentication-agent-1", NULL,
"/usr/bin/kdeconnectd", "--replace", NULL,
"/usr/bin/bash", "/home/sravan/.scripts/dunst.sh", "--on", NULL,
"/usr/bin/nextcloud", NULL,
"/usr/bin/syncthing-gtk", NULL,
"/usr/bin/openrgb", NULL,
"/usr/bin/udiskie", "-a", "-n", "-s", NULL,
"wl-paste", "--type", "text", "--watch", "cliphist", "store", NULL,
"wl-paste", "--type", "image", "--watch", "cliphist", "store", NULL,
NULL /* terminate */
};
#endif // AUTOSTART_PATCH
Window Rules
/* NOTE: ALWAYS keep a rule declared even if you don't use rules (e.g leave at least one example) */
static const Rule rules[] = {
/* app_id title tags mask isfloating monitor */
/* examples: */
{ "Gimp_EXAMPLE", NULL, 0, 1, -1 }, /* Start on currently visible tags floating, not tiled */
{ "firefox_EXAMPLE", NULL, 1 << 8, 0, -1 }, /* Start on ONLY tag "9" */
};Layouts
static const Layout layouts[] = {
/* symbol arrange function */
{ "[]=", tile },
{ "><>", NULL }, /* no layout function means floating behavior */
{ "[M]", monocle },
};Monitor Rules
/* (x=-1, y=-1) is reserved as an "autoconfigure" monitor position indicator
,* WARNING: negative values other than (-1, -1) cause problems with Xwayland clients
,* https://gitlab.freedesktop.org/xorg/xserver/-/issues/899
,*/
/* NOTE: ALWAYS add a fallback rule, even if you are completely sure it won't be used */
static const MonitorRule monrules[] = {
/* name mfact nmaster scale layout rotate/reflect x y */
/* example of a HiDPI laptop monitor:
{ "eDP-1", 0.5f, 1, 2, &layouts[0], WL_OUTPUT_TRANSFORM_NORMAL, -1, -1 },
,*/
/* defaults */
{ NULL, 0.5f, 1, 1, &layouts[0], WL_OUTPUT_TRANSFORM_NORMAL, -1, -1 },
};Keyboard
static const struct xkb_rule_names xkb_rules = {
/* can specify fields: rules, model, layout, variant, options */
/* example:
.options = "ctrl:nocaps",
,*/
.options = NULL,
};
static const int repeat_rate = 25;
static const int repeat_delay = 600;Trackpad
static const int tap_to_click = 1;
static const int tap_and_drag = 1;
static const int drag_lock = 1;
static const int natural_scrolling = 0;
static const int disable_while_typing = 1;
static const int left_handed = 0;
static const int middle_button_emulation = 0;
/* You can choose between:
LIBINPUT_CONFIG_SCROLL_NO_SCROLL
LIBINPUT_CONFIG_SCROLL_2FG
LIBINPUT_CONFIG_SCROLL_EDGE
LIBINPUT_CONFIG_SCROLL_ON_BUTTON_DOWN
,*/
static const enum libinput_config_scroll_method scroll_method = LIBINPUT_CONFIG_SCROLL_2FG;
/* You can choose between:
LIBINPUT_CONFIG_CLICK_METHOD_NONE
LIBINPUT_CONFIG_CLICK_METHOD_BUTTON_AREAS
LIBINPUT_CONFIG_CLICK_METHOD_CLICKFINGER
,*/
static const enum libinput_config_click_method click_method = LIBINPUT_CONFIG_CLICK_METHOD_BUTTON_AREAS;
/* You can choose between:
LIBINPUT_CONFIG_SEND_EVENTS_ENABLED
LIBINPUT_CONFIG_SEND_EVENTS_DISABLED
LIBINPUT_CONFIG_SEND_EVENTS_DISABLED_ON_EXTERNAL_MOUSE
,*/
static const uint32_t send_events_mode = LIBINPUT_CONFIG_SEND_EVENTS_ENABLED;
/* You can choose between:
LIBINPUT_CONFIG_ACCEL_PROFILE_FLAT
LIBINPUT_CONFIG_ACCEL_PROFILE_ADAPTIVE
,*/
static const enum libinput_config_accel_profile accel_profile = LIBINPUT_CONFIG_ACCEL_PROFILE_ADAPTIVE;
static const double accel_speed = 0.0;
/* You can choose between:
LIBINPUT_CONFIG_TAP_MAP_LRM -- 1/2/3 finger tap maps to left/right/middle
LIBINPUT_CONFIG_TAP_MAP_LMR -- 1/2/3 finger tap maps to left/middle/right
,*/
static const enum libinput_config_tap_button_map button_map = LIBINPUT_CONFIG_TAP_MAP_LRM;Keybindings
/* If you want to use the windows key for MODKEY, use WLR_MODIFIER_LOGO */
#define MODKEY WLR_MODIFIER_LOGO
#define TAGKEYS(KEY,SKEY,TAG) \
{ MODKEY, KEY, view, {.ui = 1 << TAG} }, \
{ MODKEY|WLR_MODIFIER_CTRL, KEY, toggleview, {.ui = 1 << TAG} }, \
{ MODKEY|WLR_MODIFIER_SHIFT, SKEY, tag, {.ui = 1 << TAG} }, \
{ MODKEY|WLR_MODIFIER_CTRL|WLR_MODIFIER_SHIFT,SKEY,toggletag, {.ui = 1 << TAG} }
/* helper for spawning shell commands in the pre dwm-5.0 fashion */
#define SHCMD(cmd) { .v = (const char*[]){ "/bin/sh", "-c", cmd, NULL } }Commands
static const char *termcmd[] = { "kitty", NULL };
static const char *menucmd[] = { "fuzzel", NULL };
static const Key keys[] = {
/* Note that Shift changes certain key codes: c -> C, 2 -> at, etc. */
/* modifier key function argument */
{ MODKEY, XKB_KEY_p, spawn, {.v = menucmd} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_Return, spawn, {.v = termcmd} },
{ MODKEY, XKB_KEY_j, focusstack, {.i = +1} },
{ MODKEY, XKB_KEY_k, focusstack, {.i = -1} },
{ MODKEY, XKB_KEY_i, incnmaster, {.i = +1} },
{ MODKEY, XKB_KEY_d, incnmaster, {.i = -1} },
{ MODKEY, XKB_KEY_h, setmfact, {.f = -0.05f} },
{ MODKEY, XKB_KEY_l, setmfact, {.f = +0.05f} },
{ MODKEY, XKB_KEY_Return, zoom, {0} },
{ MODKEY, XKB_KEY_Tab, view, {0} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_C, killclient, {0} },
{ MODKEY, XKB_KEY_t, setlayout, {.v = &layouts[0]} },
{ MODKEY, XKB_KEY_f, setlayout, {.v = &layouts[1]} },
{ MODKEY, XKB_KEY_m, setlayout, {.v = &layouts[2]} },
{ MODKEY, XKB_KEY_space, setlayout, {0} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_space, togglefloating, {0} },
{ MODKEY, XKB_KEY_e, togglefullscreen, {0} },
{ MODKEY, XKB_KEY_0, view, {.ui = ~0} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_parenright, tag, {.ui = ~0} },
{ MODKEY, XKB_KEY_comma, focusmon, {.i = WLR_DIRECTION_LEFT} },
{ MODKEY, XKB_KEY_period, focusmon, {.i = WLR_DIRECTION_RIGHT} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_less, tagmon, {.i = WLR_DIRECTION_LEFT} },
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_greater, tagmon, {.i = WLR_DIRECTION_RIGHT} },
TAGKEYS( XKB_KEY_1, XKB_KEY_exclam, 0),
TAGKEYS( XKB_KEY_2, XKB_KEY_at, 1),
TAGKEYS( XKB_KEY_3, XKB_KEY_numbersign, 2),
TAGKEYS( XKB_KEY_4, XKB_KEY_dollar, 3),
TAGKEYS( XKB_KEY_5, XKB_KEY_percent, 4),
TAGKEYS( XKB_KEY_6, XKB_KEY_asciicircum, 5),
TAGKEYS( XKB_KEY_7, XKB_KEY_ampersand, 6),
TAGKEYS( XKB_KEY_8, XKB_KEY_asterisk, 7),
TAGKEYS( XKB_KEY_9, XKB_KEY_parenleft, 8),
{ MODKEY|WLR_MODIFIER_SHIFT, XKB_KEY_Q, quit, {0} },
/* Ctrl-Alt-Backspace and Ctrl-Alt-Fx used to be handled by X server */
{ WLR_MODIFIER_CTRL|WLR_MODIFIER_ALT,XKB_KEY_Terminate_Server, quit, {0} },
/* Ctrl-Alt-Fx is used to switch to another VT, if you don't know what a VT is
,* do not remove them.
,*/
#define CHVT(n) { WLR_MODIFIER_CTRL|WLR_MODIFIER_ALT,XKB_KEY_XF86Switch_VT_##n, chvt, {.ui = (n)} }
CHVT(1), CHVT(2), CHVT(3), CHVT(4), CHVT(5), CHVT(6),
CHVT(7), CHVT(8), CHVT(9), CHVT(10), CHVT(11), CHVT(12),
};Buttons
static const Button buttons[] = {
{ MODKEY, BTN_LEFT, moveresize, {.ui = CurMove} },
{ MODKEY, BTN_MIDDLE, togglefloating, {0} },
{ MODKEY, BTN_RIGHT, moveresize, {.ui = CurResize} },
};Justfile
set shell := ["bash", "-c"]
# List just commands by default
default:
@just --list
# Rebuild project
dwl-rebuild:
sudo make clean all