rk3288: Allow board-specific APLL (CPU clock) settings

This changes the API to rkclk_configure_cpu() such that we can pass
in the desired APLL frequency in each veyron board's bootblock.c.

Devices with a constrainted form facter (rialto and possibly mickey)
will use this to run firmware at a slower speed to mitigate risk
of thermal issues (due to the RK808, not the RK3288).

BUG=chrome-os-partner:42054
BRANCH=none
TEST=amstan says rialto is noticably cooler (and slower)

Change-Id: I28b332e1d484bd009599944cd9f5cf633ea468dd
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: d10af5e18b4131a00f202272e405bd22eab4caeb
Original-Change-Id: I960cb6ff512c058e72032aa2cbadedde97510631
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/297190
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/11582
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

src/mainboard/google/veyron/bootblock.c

@@ -59,7 +59,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1800_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/mainboard/google/veyron_brain/bootblock.c

@@ -61,7 +61,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1800_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/mainboard/google/veyron_danger/bootblock.c

@@ -61,7 +61,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1800_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/mainboard/google/veyron_mickey/bootblock.c

@@ -61,7 +61,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1800_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/mainboard/google/veyron_rialto/bootblock.c

@@ -65,7 +65,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1392_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/mainboard/google/veyron_romy/bootblock.c

@@ -61,7 +61,7 @@ void bootblock_mainboard_init(void)
 	udelay(175);/* Must wait for voltage to stabilize,2mV/us */
 	rk808_configure_buck(1, 1400);
 	udelay(100);/* Must wait for voltage to stabilize,2mV/us */
-	rkclk_configure_cpu();
+	rkclk_configure_cpu(APLL_1800_MHZ);
 
 	/* i2c1 for tpm */
 	write32(&rk3288_grf->iomux_i2c1, IOMUX_I2C1);

src/soc/rockchip/rk3288/clock.c

@@ -73,10 +73,17 @@ static struct rk3288_cru_reg * const cru_ptr = (void *)CRU_BASE;
 		       "divisors on line " STRINGIFY(__LINE__));
 
 /* Keep divisors as low as possible to reduce jitter and power usage. */
-static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 1);
 static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2);
 static const struct pll_div cpll_init_cfg = PLL_DIVISORS(CPLL_HZ, 1, 2);
 
+/* See linux/drivers/clk/rockchip/clk-rk3288.c for more APLL combinations */
+static const struct pll_div apll_1800_cfg = PLL_DIVISORS(1800*MHz, 1, 1);
+static const struct pll_div apll_1392_cfg = PLL_DIVISORS(1392*MHz, 1, 1);
+static const struct pll_div *apll_cfgs[] = {
+	[APLL_1800_MHZ] = &apll_1800_cfg,
+	[APLL_1392_MHZ] = &apll_1392_cfg,
+};
+
 /*******************PLL CON0 BITS***************************/
 #define PLL_OD_MSK	(0x0F)
 
@@ -314,13 +321,13 @@ void rkclk_init(void)
 
 }
 
-void rkclk_configure_cpu(void)
+void rkclk_configure_cpu(enum apll_frequencies apll_freq)
 {
 	/* pll enter slow-mode */
 	write32(&cru_ptr->cru_mode_con,
 		RK_CLRSETBITS(APLL_MODE_MSK, APLL_MODE_SLOW));
 
-	rkclk_set_pll(&cru_ptr->cru_apll_con[0], &apll_init_cfg);
+	rkclk_set_pll(&cru_ptr->cru_apll_con[0], apll_cfgs[apll_freq]);
 
 	/* waiting for pll lock */
 	while (1) {

src/soc/rockchip/rk3288/include/soc/clock.h

@@ -24,11 +24,15 @@
 
 #define OSC_HZ		(24*MHz)
 
-#define APLL_HZ		(1800*MHz)
 #define GPLL_HZ		(594*MHz)
 #define CPLL_HZ		(384*MHz)
 #define NPLL_HZ		(384*MHz)
 
+enum apll_frequencies {
+	APLL_1800_MHZ,
+	APLL_1392_MHZ,
+};
+
 /* The SRAM is clocked off aclk_bus, so we want to max it out for boot speed. */
 #define PD_BUS_ACLK_HZ	(297000*KHz)
 #define PD_BUS_HCLK_HZ	(148500*KHz)
@@ -44,7 +48,7 @@ void rkclk_ddr_reset(u32 ch, u32 ctl, u32 phy);
 void rkclk_ddr_phy_ctl_reset(u32 ch, u32 n);
 void rkclk_configure_ddr(unsigned int hz);
 void rkclk_configure_i2s(unsigned int hz);
-void rkclk_configure_cpu(void);
+void rkclk_configure_cpu(enum apll_frequencies apll_freq);
 void rkclk_configure_crypto(unsigned int hz);
 void rkclk_configure_tsadc(unsigned int hz);
 void rkclk_configure_vop_aclk(u32 vop_id, u32 aclk_hz);