treewide: Rename Sabrina to Mendocino

'Mendocino' was an embargoed name and could previously not be used
in references to Skyrim.  coreboot has references to sabrina both
in directory structure and in files. This will make life difficult
for people looking for Mendocino support in the long term. The code
name should be replaced with "mendocino".

BUG=b:239072117
TEST=Builds

Cq-Depend: chromium:3764023
Cq-Depend: chromium:3763392
Cq-Depend: chrome-internal:4876777

Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: I2d0f76fde07a209a79f7e1596cc8064e53f06ada
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65861
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>

src/soc/amd/mendocino/uart.c

@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <amdblocks/aoac.h>
+#include <amdblocks/gpio.h>
+#include <amdblocks/uart.h>
+#include <commonlib/helpers.h>
+#include <console/console.h>
+#include <device/device.h>
+#include <device/mmio.h>
+#include <soc/aoac_defs.h>
+#include <soc/gpio.h>
+#include <soc/southbridge.h>
+#include <soc/uart.h>
+#include <types.h>
+
+static const struct {
+	uintptr_t base;
+	struct soc_amd_gpio mux[2];
+} uart_info[] = {
+	[0] = { APU_UART0_BASE, {
+			PAD_NF(GPIO_143, UART0_TXD, PULL_NONE),
+			PAD_NF(GPIO_141, UART0_RXD, PULL_NONE),
+	} },
+	[1] = { APU_UART1_BASE, {
+			PAD_NF(GPIO_140, UART1_TXD, PULL_NONE),
+			PAD_NF(GPIO_142, UART1_RXD, PULL_NONE),
+	} },
+	[2] = { APU_UART2_BASE, {
+			PAD_NF(GPIO_138, UART2_TXD, PULL_NONE),
+			PAD_NF(GPIO_136, UART2_RXD, PULL_NONE),
+	} },
+	[3] = { APU_UART3_BASE, {
+			PAD_NF(GPIO_135, UART3_TXD, PULL_NONE),
+			PAD_NF(GPIO_137, UART3_RXD, PULL_NONE),
+	} },
+	[4] = { APU_UART4_BASE, {
+			PAD_NF(GPIO_156, UART4_TXD, PULL_NONE),
+			PAD_NF(GPIO_155, UART4_RXD, PULL_NONE),
+	} },
+};
+
+uintptr_t get_uart_base(unsigned int idx)
+{
+	if (idx >= ARRAY_SIZE(uart_info))
+		return 0;
+
+	return uart_info[idx].base;
+}
+
+void clear_uart_legacy_config(void)
+{
+	write16((void *)FCH_LEGACY_UART_DECODE, 0);
+}
+
+void set_uart_config(unsigned int idx)
+{
+	if (idx >= ARRAY_SIZE(uart_info))
+		return;
+
+	gpio_configure_pads(uart_info[idx].mux, 2);
+}
+
+static const char *uart_acpi_name(const struct device *dev)
+{
+	switch (dev->path.mmio.addr) {
+	case APU_UART0_BASE:
+		return "FUR0";
+	case APU_UART1_BASE:
+		return "FUR1";
+	case APU_UART2_BASE:
+		return "FUR2";
+	case APU_UART3_BASE:
+		return "FUR3";
+	case APU_UART4_BASE:
+		return "FUR4";
+	default:
+		return NULL;
+	}
+}
+
+/* Even though this is called enable, it gets called for both enabled and disabled devices. */
+static void uart_enable(struct device *dev)
+{
+	unsigned int dev_id;
+
+	switch (dev->path.mmio.addr) {
+	case APU_UART0_BASE:
+		dev_id = FCH_AOAC_DEV_UART0;
+		break;
+	case APU_UART1_BASE:
+		dev_id = FCH_AOAC_DEV_UART1;
+		break;
+	case APU_UART2_BASE:
+		dev_id = FCH_AOAC_DEV_UART2;
+		break;
+	case APU_UART3_BASE:
+		dev_id = FCH_AOAC_DEV_UART3;
+		break;
+	case APU_UART4_BASE:
+		dev_id = FCH_AOAC_DEV_UART4;
+		break;
+	default:
+		printk(BIOS_ERR, "%s: Unknown device: %s\n", __func__, dev_path(dev));
+		return;
+	}
+
+	if (dev->enabled) {
+		power_on_aoac_device(dev_id);
+		wait_for_aoac_enabled(dev_id);
+	} else {
+		power_off_aoac_device(dev_id);
+	}
+}
+
+static void uart_read_resources(struct device *dev)
+{
+	mmio_resource_kb(dev, 0, dev->path.mmio.addr / KiB, 4);
+}
+
+struct device_operations mendocino_uart_mmio_ops = {
+	.read_resources = uart_read_resources,
+	.set_resources = noop_set_resources,
+	.scan_bus = scan_static_bus,
+	.enable = uart_enable,
+	.acpi_name = uart_acpi_name,
+	.acpi_fill_ssdt = uart_inject_ssdt,
+};