soc/intel/cannonlake: Add chipset event logging

Add logging of chipset events on boot into the flash event log.
This was tested on a google/sarien board to ensure that events
like "System Reset" are added to the log as expected.

Change-Id: I38498cef36d8cc9c8a1f63d12618ea768b65254c
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>

src/soc/intel/cannonlake/Makefile.inc

@@ -34,6 +34,7 @@ romstage-$(CONFIG_UART_DEBUG) += uart.c
 ramstage-y += acpi.c
 ramstage-y += chip.c
 ramstage-y += cpu.c
+ramstage-y += elog.c
 ramstage-y += finalize.c
 ramstage-y += fsp_params.c
 ramstage-y += graphics.c

src/soc/intel/cannonlake/elog.c

@@ -0,0 +1,125 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2015 Intel Corporation.
+ * Copyright 2019 Google LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <bootstate.h>
+#include <cbmem.h>
+#include <console/console.h>
+#include <stdint.h>
+#include <elog.h>
+#include <intelblocks/pmclib.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+
+static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start)
+{
+	int i;
+
+	gpe0_sts &= gpe0_en;
+
+	for (i = 0; i <= 31; i++) {
+		if (gpe0_sts & (1 << i))
+			elog_add_event_wake(ELOG_WAKE_SOURCE_GPIO, i + start);
+	}
+}
+
+static void pch_log_wake_source(struct chipset_power_state *ps)
+{
+	/* Power Button */
+	if (ps->pm1_sts & PWRBTN_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_PWRBTN, 0);
+
+	/* RTC */
+	if (ps->pm1_sts & RTC_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_RTC, 0);
+
+	/* PCI Express (TODO: determine wake device) */
+	if (ps->pm1_sts & PCIEXPWAK_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_PCIE, 0);
+
+	/* PME (TODO: determine wake device) */
+	if (ps->gpe0_sts[GPE_STD] & PME_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_PME, 0);
+
+	/* Internal PME (TODO: determine wake device) */
+	if (ps->gpe0_sts[GPE_STD] & PME_B0_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_PME_INTERNAL, 0);
+
+	/* SMBUS Wake */
+	if (ps->gpe0_sts[GPE_STD] & SMB_WAK_STS)
+		elog_add_event_wake(ELOG_WAKE_SOURCE_SMBUS, 0);
+
+	/* Log GPIO events in set 1-3 */
+	pch_log_gpio_gpe(ps->gpe0_sts[GPE_31_0], ps->gpe0_en[GPE_31_0], 0);
+	pch_log_gpio_gpe(ps->gpe0_sts[GPE_63_32], ps->gpe0_en[GPE_63_32], 32);
+	pch_log_gpio_gpe(ps->gpe0_sts[GPE_95_64], ps->gpe0_en[GPE_95_64], 64);
+	/* Treat the STD as an extension of GPIO to obtain visibility. */
+	pch_log_gpio_gpe(ps->gpe0_sts[GPE_STD], ps->gpe0_en[GPE_STD], 96);
+}
+
+static void pch_log_power_and_resets(struct chipset_power_state *ps)
+{
+	/* Thermal Trip */
+	if (ps->gblrst_cause[0] & GBLRST_CAUSE0_THERMTRIP)
+		elog_add_event(ELOG_TYPE_THERM_TRIP);
+
+	/* PWR_FLR Power Failure */
+	if (ps->gen_pmcon_b & PWR_FLR)
+		elog_add_event(ELOG_TYPE_POWER_FAIL);
+
+	/* SUS Well Power Failure */
+	if (ps->gen_pmcon_b & SUS_PWR_FLR)
+		elog_add_event(ELOG_TYPE_SUS_POWER_FAIL);
+
+	/* TCO Timeout */
+	if (ps->prev_sleep_state != ACPI_S3 &&
+	    ps->tco2_sts & TCO2_STS_SECOND_TO)
+		elog_add_event(ELOG_TYPE_TCO_RESET);
+
+	/* Power Button Override */
+	if (ps->pm1_sts & PRBTNOR_STS)
+		elog_add_event(ELOG_TYPE_POWER_BUTTON_OVERRIDE);
+
+	/* RTC reset */
+	if (ps->gen_pmcon_b & RTC_BATTERY_DEAD)
+		elog_add_event(ELOG_TYPE_RTC_RESET);
+
+	/* Host Reset Status */
+	if (ps->gen_pmcon_b & HOST_RST_STS)
+		elog_add_event(ELOG_TYPE_SYSTEM_RESET);
+
+	/* ACPI Wake Event */
+	if (ps->prev_sleep_state != ACPI_S0)
+		elog_add_event_byte(ELOG_TYPE_ACPI_WAKE, ps->prev_sleep_state);
+}
+
+static void pch_log_state(void *unused)
+{
+	struct chipset_power_state *ps = pmc_get_power_state();
+
+	if (!ps) {
+		printk(BIOS_ERR, "chipset_power_state not found!\n");
+		return;
+	}
+
+	/* Power and Reset */
+	pch_log_power_and_resets(ps);
+
+	/* Wake Sources */
+	if (ps->prev_sleep_state > ACPI_S0)
+		pch_log_wake_source(ps);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_EXIT, pch_log_state, NULL);

src/soc/intel/cannonlake/include/soc/pch.h

@@ -28,6 +28,4 @@
 #define PCIE_CLK_LAN			0x70
 #define PCIE_CLK_FREE			0x80
 
-void pch_log_state(void);
-
 #endif