sravan/system76-coreboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/nissa/var/pujjoga: Modify P sensor setting

Browse Source 
1. The P sensor need follow WWAN FW_CONFIG to enable/disable

2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail

Schematic version: 500E_GEN4S_ADL_N_MB_0418

BUG=b:357998089
TEST=1. Boot to OS and verify the P sensor devices is set based on
fw_config.
2. Confirm that the PLT test can pass successfully.

Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
This commit is contained in:
Leo Chou
2024-08-07 14:12:31 +08:00
committed by Felix Held
parent e1e16e0cb9
commit 87d9511741
2 changed files with 5 additions and 3 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
src/mainboard/google/brya/variants/pujjoga/gpio.c
View File

@@ -44,8 +44,8 @@ static const struct pad_config override_gpio_table[] = {
PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1), PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1),
/* H17 : DDPB_CTRLDATA */ /* H17 : DDPB_CTRLDATA */
PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1), PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
/* H19 : SOC_I2C_SUB_INT_ODL */ /* H19 : SOC_I2C_SUB_INT_ODL */
PAD_CFG_GPI_LOCK(GPP_H19, NONE, LOCK_CONFIG), PAD_CFG_GPI_APIC(GPP_H19, NONE, PLTRST, LEVEL, NONE),
/* H21 : WWAN_PERST_L */ /* H21 : WWAN_PERST_L */
PAD_NC_LOCK(GPP_H21, NONE, LOCK_CONFIG), PAD_NC_LOCK(GPP_H21, NONE, LOCK_CONFIG),
/* H22 : WCAM_MCLK_R ==> NC */ /* H22 : WCAM_MCLK_R ==> NC */

4
src/mainboard/google/brya/variants/pujjoga/overridetree.cb
View File

@@ -303,7 +303,9 @@ chip soc/intel/alderlake
register "int_comp_resistor" = ""lowest"" register "int_comp_resistor" = ""lowest""
register "input_precharge_resistor_ohms" = "4000" register "input_precharge_resistor_ohms" = "4000"
register "input_analog_gain" = "1" register "input_analog_gain" = "1"
device i2c 28 on end device i2c 28 on
probe WWAN LTE_PRESENT
end
end end
end end
device ref i2c3 on device ref i2c3 on