mb/google/drallion: Remove dt entries equal to chipset dt

Clean up the devicetree by removing entries which are equal to the
chipset devicetree. The P2SB device is enabled but it's hidden by the
FSP. So just remove that as well since the chipset devicetree configures
it correctly.

Change-Id: I6186d295427bcd4a3b696f4df59d94a148ced011
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This commit is contained in:
Felix Singer
2024-05-02 02:32:35 +02:00
committed by Felix Held
parent 3cc3a501cf
commit aa37528107

View File

@@ -216,9 +216,7 @@ chip soc/intel/cannonlake
register "gpio_pm[COMM_3]" = "0"
register "gpio_pm[COMM_4]" = "0"
device cpu_cluster 0 on end
device domain 0 on
device pci 00.0 on end # Host Bridge
device pci 02.0 on
chip drivers/gfx/generic
register "device_count" = "1"
@@ -236,8 +234,6 @@ chip soc/intel/cannonlake
end # Integrated Graphics Device
device pci 04.0 on end # SA Thermal device
device pci 12.0 on end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 13.0 on # Integrated Sensor Hub
chip drivers/intel/ish
register "firmware_name" = ""drallion_ish.bin""
@@ -321,14 +317,12 @@ chip soc/intel/cannonlake
end
end
end # USB xHCI
device pci 14.1 off end # USB xDCI (OTG)
device pci 14.3 on
chip drivers/wifi/generic
register "wake" = "PME_B0_EN_BIT"
device generic 0 on end
end
end # CNVi wifi
device pci 14.5 off end # SDCard
device pci 15.0 on
chip drivers/i2c/hid
register "generic.hid" = ""WCOM48E2""
@@ -406,15 +400,6 @@ chip soc/intel/cannonlake
device i2c 15 on end
end
end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
device pci 17.0 off end # SATA
device pci 19.0 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
@@ -422,42 +407,21 @@ chip soc/intel/cannonlake
device i2c 50 on end
end
end # I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 off end # UART #2
device pci 1a.0 off end # eMMC
device pci 1c.0 off end # PCI Express Port 1 (USB)
device pci 1c.1 off end # PCI Express Port 2 (USB)
device pci 1c.2 off end # PCI Express Port 3 (USB)
device pci 1c.3 off end # PCI Express Port 4 (USB)
device pci 1c.4 off end # PCI Express Port 5 (USB)
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on
smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "2230" "SlotDataBusWidth1X"
register "PcieRpSlotImplemented[8]" = "1"
end # PCI Express Port 9
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1d.4 on
smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "2280" "SlotDataBusWidth4X"
register "PcieRpSlotImplemented[12]" = "1"
end # PCI Express Port 13 (x4)
device pci 1e.0 on end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1f.0 on
chip ec/google/wilco
device pnp 0c09.0 on end
end
end # LPC/eSPI
device pci 1f.1 on end # P2SB
device pci 1f.2 hidden end # Power Management Controller
device pci 1f.3 on end # Intel HDA
device pci 1f.4 on end # SMBus
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end