MTRR related improvements for AMD family 10h and family 0Fh systems

-- When building for UMA, reduce the limit for DRAM below 4GB
   from E0000000 to C0000000. This is needed to accomodate the
   UMA frame buffer.
-- Correct problem where msr C0010010 bits 21 and 22 (MtrrTom2En
   and Tom2ForceMemTypeWB) are not set consistently across cores.
-- Enable TOM2 only if DRAM is present above 4GB.
-- Use AMD Tom2ForceMemTypeWB feature to avoid the need for 
   variable MTRR ranges above 4GB.
-- Add above4gb flag argument to function x86_setup_var_mtrrs. Clearing
   this flag causes x86_setup_var_mtrrs() to omit MTRR ranges for
   DRAM above 4GB. AMD systems use this option to conserve MTRRs.
-- Northbridge.c change to deduct UMA memory from DRAM size reported
   by ram_resource. This corrects a problem where mtrr.c generates an
   unexpected variable MTRR range.
-- Correct problem causing build failure when CONFIG_GFXUMA=1 and
   CONFIG_VAR_MTRR_HOLE=0.
-- Reserve the UMA DRAM range for AMD K8 as is already done for AMD
   family 10h.
Tested with mahogany on ECS A780G-GM with 2GB and 4GB.
Tested with mahogany_fam10 on ECS A780G-GM with 2GB and 4GB.
 
Signed-off-by: Scott Duplichan <scott@notabs.org>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6067 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/include/cpu/x86/mtrr.h

@@ -37,7 +37,7 @@
 #if !defined (ASSEMBLY) && !defined(__PRE_RAM__)
 #include <device/device.h>
 void enable_fixed_mtrr(void);
-void x86_setup_var_mtrrs(unsigned address_bits);
+void x86_setup_var_mtrrs(unsigned int address_bits, unsigned int above4gb);
 void x86_setup_mtrrs(unsigned address_bits);
 int x86_mtrr_check(void);
 void set_var_mtrr_resource(void *gp, struct device *dev, struct resource *res);