Revert "mb/google/hatch/dratini: Describe the privacy_gpio"

This reverts commit f41645c34d8b22a3d887abd56138ae794fc2dfa5.

In Dragonair, during the MP stage, one of the resistors needed
for this functionality has been removed. This results in the
privacy-switch not readable back by the system.

BUG=b:178458332

Change-Id: I0781f338d5ecd89fccee613fb13ea25c59385625
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is contained in:
Ricardo Ribalda 2021-01-28 13:17:47 +00:00 committed by Patrick Georgi
parent 3acea5c51a
commit fa21c922c6
2 changed files with 0 additions and 15 deletions

View File

@ -16,8 +16,6 @@ static const struct pad_config gpio_table[] = {
PAD_NC(GPP_A19, NONE),
/* C12 : FPMCU_PCH_BOOT1 */
PAD_CFG_GPO(GPP_C12, 0, DEEP),
/* D4 : Camera Privacy Status */
PAD_CFG_GPI_INT(GPP_D4, NONE, PLTRST, EDGE_BOTH),
/* F1 : NC */
PAD_NC(GPP_F1, NONE),
/* F3 : MEM_STRAP_3 */

View File

@ -72,19 +72,6 @@ chip soc/intel/cannonlake
device pci 02.0 on # Integrated Graphics Device
register "gfx" = "GMA_DEFAULT_PANEL(0)"
end
device pci 14.0 on
chip drivers/usb/acpi
device usb 0.0 on
chip drivers/usb/acpi
# The Linux Kernel does not allow an inverted BOTH_EDGE irq
# So we need to use GpioIO() instead of GpioInt()
# https://www.kernel.org/doc/Documentation/acpi/gpio-properties.txt
register "privacy_gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_D4)"
device usb 2.6 on end
end
end
end
end # USB xHCI
device pci 15.0 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""