Preloading files before vboot runs and using them after vboot has
finished will result in the wrong files getting used. Disable
cbfs_preload to avoid this behavior.
BUG=b:179699789
TEST=none
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7698b481a73fb24eecf4c810ff8be8b6826528ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59876
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This change consolidates the COOP rules. Co-op in theory works in all
x86 stages now, but it hasn't been enabled yet.
BUG=b:179699789
TEST=Boot guybrush to OS and verify preloads still work
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I1197406d1d36391998b08e3076146bb2fff59d00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
This patch adds the following list of changes:
1. Create a new devicetree for adlrvp-n and copy contents of adlrvp-p
devictree.
2. Add support for 2 mainboards as ADL-N board with default EC (Windows
SKU) and Chrome EC (Chrome SKU) and copy overridetree contents from
adlrvp-p.
3. Add mainboard Kconfig to Kconfig.name file
4. Handle mainboard names in Kconfig file for ADLRVP N
5. Add config options to pick the adlrvp_n devicetree
Change-Id: I4abf3bf62ec0398ae75e21575a2fab0d44b5c7ad
Signed-off-by: Usha P <usha.p@intel.com>
Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
The MBOX_BIOS_CMD_DRAM_INFO PSP mailbox command is only available on the
first generation of PSP mailbox interface and not on the second
generation. The second generation of the PSP mailbox interface was
introduced with the AMD family 17h SoCs on which the DRAM is already
initialized before the x86 cores are released from reset.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97b29fdc4a71d6493ec63fa60f580778f026ec0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
In the case of deduct_cmd_len being set and the adjusted cmd_len >=
ctrlr_max, ctrlr_max wasn't being adjusted and still had the value of
ctrlr->max_xfer_size. Handle this edge case (which we should never run
into) by setting ctrlr_max to 0 and printing a warning to the console.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9941b2947bb0a44dfae8ee69f509795dfb0cb241
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The Cezanne PPR #56569 Rev 3.03 has one more SPI FIFO bytes defined
compared to the previous generations. It is unclear if adding some
special handling for Cezanne would be worth the effort, since the
current code just doesn't use the last byte which should be safe to do,
since this only affects the maximum number of bytes that can be used for
one SPI transaction. Having another byte to use on Cezanne wouldn't
reduce the number of SPI transactions to write a 256 byte data block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic730f4fe838f59066120c811833995c132c84c1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60117
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The last byte of the SPI FIFO SPI_FIFO_LAST_BYTE is at offset 0xc6 of
the SPI controller's MMIO region for Stoneyridge and Picasso. Both
SPI_FIFO_LAST_BYTE and SPI_FIFO_DEPTH had an off-by-one error that ended
up cancelling out each other, so the resulting value for SPI_FIFO_DEPTH
isn't changed.
TEST=Timeless build results in identical image for Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1676be902ccf57e2e9f69d81251b4315866a0628
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Set TPM power_managed_mode to TPM_KERNEL_POWER_MANAGED. This will cause
the TPM kernel driver to send a shutdown command before s0i3 entry. This
change depends on S0i3 verstage running and reinitializing the TPM.
BUG=b:200578885
BRANCH=None
TEST=TPM shutdown sent during s0i3 entry on guybrush
Change-Id: I206022cc2a29690186206966c5d45bd55c303248
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Add new memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Micron MT53E512M32D1NP-046 WT:B
2. Samsung K4U6E3S4AB-MGCL
3. Hynix H54G46CYRBX267
BUG=b:209889645
BRANCH=dedede
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I0b2f447a610a0a857e819ede257ac89cfd817018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59991
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add initial gpio configuration for taniks according to schematics
G570_MB_CHROME_1207_1630_ADC. The schematics reserved HPS and FP but
taniks doesn't use them, so set FP and HPS related pins to NC.
BUG=b:209492408, b:209553289
TEST=FW_NAME=taniks emerge-brya coreboot
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ic5c4ead4ad59137e1764e1226415ab6041c68aab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59938
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
A custom board with soc/intel/denverton_ns does not respond to
the keyboard and does not boot from the sata/USB disks.
Last post code 0x7b and the last line that is displayed at log
from SeaBIOS is:
All threads complete.
The issue is gone when adding setup_lapic() call to configure
EXTINT delivery of i8259 originated interrupts for the LAPIC.
Replicate call from other soc/ and make the call for both BSP
and AP CPUs.
Similar change was done for soc/intel/braswell in
commit b4f57bb3ca.
Signed-off-by: Dmitry Ponamorev <dponamorev@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Change-Id: Iafbfb733d0be546e0e2fba937fd1d262785aa54d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
To save the S3 power, USB3_HUB_RST_L is externally pulled up to a weak
resistor, so we have to reset the hub as early as possible.
Otherwise the USB3 hub may be not usable. Therefore, move USB3 HUB
reset function to bootblock.
BUG=b:210065282
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: I92feb2316302fda32478b24c014bcd380d0ac55d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60088
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Set open-drain GPIOs for ChromeOS as input and high-z mode.
After applying this patch, we can measure these pins from 1.0V to
correct voltage (1.8V) to prevent wrong judgement of low/high.
Reference document:
MT8186_SoC_Pinmux_V1_1
BUG=b:209342636
TEST=measure pins voltage 1.8V on kingler board
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ib55a773bb63404a1b952f7e7645eb7aba6638b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tracker is a debugging tool, and MT8186 only supports AP tracker.
When bus timeout occurs, the system reboots and latches some values
which could be used for debugging.
This function will be triggered only when it encounters the bug
hanging issue.
BUG=b:202871018
TEST=range of registers are dumped as expected.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie023de2a6f7421a16b2516baa0bf0bf6fff589e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
There are two versions for tracker system:
Version 1 for MT8186, and version 2 for MT8192 and MT8195.
Reference document:
MT8169_bus_dbg_tracker_cfg_reg.xls from MediaTek internal.
BUG=b:202871018
TEST=build pass
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Idb146974da118b1cf5a349370bf7b2fa13f1aba8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59989
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Add PSP_S0I3_RESUME_VERSTAGE Kconfig option. When enabled, verstage will
be run in PSP during S0i3 resume. Setting softfuse bit 40 enables this
in PSP.
BUG=b:200578885, b:202397678
BRANCH=None
TEST=Verstage runs during s0i3 resume on Nipperkin
Change-Id: I2c185f787c1e77bd09f6cbbb1f47deb665ed0c79
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
The OEM may create and sign an Audio component to extend the Audio
capability provided by Intel. The manifest is then signed, and the
signature and public key are entered into the header of the manifest
to create the final signed component binary. This creates a secure
verification mechanism where firmware verifies that the OEM Key
Manifest was signed with a key owned by a trusted owner. Once OEM KM
is authenticated, each public key hash stored within the OEM KM is
able to authenticate the corresponding FW binary.
Link to the Document:
https://www.intel.com/content/www/us/en/secure/design/confidential/software-kits/kit-details.html?kitId=689893
ADL_Signing_and_Manifesting_User_Guide.pdf
BUG=b:207820413
TEST:none
Signed-off-by: ravindr1 <ravindra@intel.com>
Change-Id: Id52b51ab1c910d70b7897eb31add8287b5b0166f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60020
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
With the elimination of remaining non-verifying CBFS APIs in CB:59682,
CBFS verification is now ready to be used in its simplest form, so
enable the respective Kconfig options in menuconfig. Add a few more
restrictions to the TOCTOU_SAFETY option for problems that haven't been
solved yet, and transform a comment in cbfs.c into a die() to make sure
we don't accidentally forget implementing it once vboot integration gets
added.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ifeba5c962c943856ab79bc6c4cb90a60c1de4a60
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59982
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name and machine_dev depending on the AUDIO_CODEC_SOURCE
field of fw_config. Define FW_CONFIG bits 36 - 37 (SSFC bits 4 - 5)
for codec selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:198689479
BRANCH=zork
TEST=ALC5682-VD/ALC5682I-VS audio codec can work
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I0c78aa166010ffa4d0cacc8a11d418d5a6906749
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59558
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Currently coreboot and EC had different logic to interpret TCSS port
number which would break retimer update functionality since coreboot
would pass wrong port information to EC.
To correct this, coreboot has implemented function which converts
coreboot physical port mapping to EC's abstract port mapping.
Each SoC needs to implement this weak function since only SoC will have
correct physical port mapping data. This function should resolve issue
of port mismatch since coreboot will count only enabled ports and
provide correct EC port number in return.
BUG=b:207057940
BRANCH=None
TEST=Check if retimer update works on Redrix and correct port
information is passed to EC.
Change-Id: I3735b7c7794b46123aba3beac8c0268ce72d658c
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Currently coreboot interprets TCSS port number as per physical port
number while EC abstracts port number and provides indices as port
number. For example, if TCSS port 1 and 3 are enabled on the board,
coreboot will interpret port numbers as 0 and 2, but since only 2 ports
are enabled in the system EC will assign port numbers as 0 and 1.
This creates a port number mismatch while communicating between EC and
coreboot. This patch addresses issue where SoC can implement function
to map correct EC port as per port enabled in mainboard.
BUG=b:207057940
BRANCH=None
TEST=Check if code compiles successfully. Functionality will work once
function is implemented in SoC code.
Change-Id: Ia7a5e63838e6529196bd211516e4d665b084f79e
Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
For additional power savings during RTD3, the PMC can power-gate the
ModPHY lanes that are used by the PCH PCIe root ports. Therefore,
using the previous PCIe RP-type detection functions, implement ModPHY
PG support for the PCH PCIe RPs.
This involves:
1) Adding a mutex so only one power resource accesses the PMC registers
at a time
2) OperationRegions to access the PMC's PG registers
3) Adding ModPHY PG enable sequence to _OFF
4) Adding ModPHY PG disable sequence to _ON
BUG=b:197983574
TEST=50 S0ix suspend/resume cycles on brya0
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I19cb05a74acfa3ded7867b1cac32c161a83b4f7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59855
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In order to distinguish PCH from CPU PCIe RPs, define the
soc_get_pcie_rp_type function for Alder Lake. While we're
here, add PCIe RP group definitions for PCH-M chipsets.
BUG=b:197983574
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I7438513e10b7cea8dac678b97a901b710247c188
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
