Clang Static Analyzer version 8.0.0 detects that the result of
log2_ceil(bios_size) and log2_ceil(window_size) is undefined if the
value of bios_size and window_size are negative. Add negative value
Check for bios_size and window_size after MIN operation.
Change-Id: I28577b6e0ba0ab45bb7804c17ba1f26c4b078b15
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Only CONFIG_USE_INTEL_FSP_MP_INIT makes a difference whether native MP
init is used or not.
Also make USE_INTEL_FSP_MP_INIT mutually exclusive with
USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI as this option requires
coreboot to set up AP and publish PPI based on it.
Change-Id: I65b80805d3cd7b66f8c9f878d3c741b98f24288d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33357
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
While running the s0ix cycling test, we observed SMM Handler caused
a stack overflow. This error happens during event log access.
This change is to increase the SMM_MODULE_STACK size to 0x800
BUG=b:135551854
TEST=suspend_resume test pass 500+ cycles, originally issue happenes
within 150 cycle
Change-Id: Ib4686b4d2d4fc3976068779314f4ee15ef4a8ae2
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This patch relying on new rule, ENV_PAYLOAD_LOADER which is set
to ENV_RAMSTAGE.
This approach will help to add future optimization (rampayload) in
coreboot flow if required.
Change-Id: Ib54ece7b9e5f281f8a092dc6f38c07406edfa5fa
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
The DIMM manufacturing ID was not being initialized and so the DIMMs
were not described in SMBIOS tables properly.
The module type can also be provided, but the SMBIOS code expects
SPD module type values from DDR2 so the DDR3/4 values are adjusted
before sending to SMBIOS.
BUG=b:134897498
BRANCH=sarien
TEST=dump and compare with dmidecode
BEFORE:
Type: DDR4
Manufacturer: Unknown (0)
Form Factor: Unknown
AFTER:
Type: DDR4
Manufacturer: Hynix/Hyundai
Form Factor: SODIMM
Change-Id: Id673e08aa6e3dad196009c3c21a3dda2f40c9e42
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This patch ensures to boot platform without onboard GFX (PCI B0:D2:F0)
enabled from mainboard devicetree.cb.
TEST=Previously platform was dying at "GMADR is not programmed!" with
IGD disabled.
Change-Id: I8c907ee25db4538a84890f2ccc3187afa86604b8
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33449
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch provides an additional option to skip HECI function
disabling using SMM mode for WHL and CML platform, where FSP has
dedicated UPD to make HECI function disable.
User to select HECI_DISABLE_USING_SMM if FSP doesn't provided dedicated
UPD.
Right now CNL and ICL platform will use HECI_DISABLE_USING_SMM kconfig
to make HECI disable and WHL/CML has to rely on FSP to make HECI
disable.
Change-Id: If3b064f3c32877235916f966a01beb525156d188
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
As per Icelake EDS PCI device B:D:F (0:0x1f:0) referred as ESPI,
hence modify SoC code to reflect the same.
This patch replaces all SoC specific PCI LPC references with ESPI
except anything that touches intel common code block.
Change-Id: I4990ea6d9b7b4c0eac2b3eea559f5469f086e827
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Re-add the Kconfig CONSOLE_UART_BASE_ADDRESS. It was lost by accident
on APL at least. It is used outside of soc/intel/ scope, e.g. to con-
figure SeaBIOS.
As we only ever configure a single UART for the coreboot console, we
don't need different addresses for each possible UART. Which saves
us a lot of code.
Change-Id: I28e1d98aa37a6acb57b98b8882fc4fa131d5d309
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
We should only provide this implementation when the Intel LPSS UART is
used. Otherwise, no other UART could be used for the console with these
SoCs.
Change-Id: Iebd89edb3f21d4a68587fd02659b4d529f3f4bbe
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33097
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
We only configure the base address for the console UART, the other
addresses are never assigned to the hardware. It seems better to
return 0 for them instead of a spurious value.
Change-Id: I3fa5c99958b56ca5b0b603917c086bdddb677fa2
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
gpio_pm_configure clears out all the bits related to PM configuration
in MISCCFG register and sets only the bits requested by mainboard. The
mask as it is set currently results in preserving all PM bits instead
of clearing them. This change updates the mask to ensure that the PM
bits are cleared before setting the ones requested by mainboard.
Change-Id: I5b8c04952775dc1e94fa229328be2f3c1102a468
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Clang Static Analyzer version 8.0.0 detects that log2_ceil(bios_size)
and log2_ceil(window_size) are garbage or undefined if the value of
bios_size and window_size is zero. Check bios_size and window_size after
MIN operation to prevent error.
TEST=Built and boot up to kernel.
Change-Id: Ifc3f3da52d129ef5d6063a46b045603a236be759
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32924
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Clang Static Analyzer version 8.0.0 detects the division by zero if
gspi_clk_mhz is initialized to 0. gspi_clk_mhz is referred to speed_mhz
in devicetree. Set gspi_clk_mhz to 1 if it is detected as 0 in order to
prevent the division by zero in DIV_ROUND_UP operation. Then the value
of (ref_clk_mhz - 1) will be fed into GSPI's Serial Clock Rate value.
TEST=Built and boot up to kernel.
Change-Id: I6a09474bff114c57d7a9c4c232bb636ff287e4d5
Signed-off-by: John Zhao <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
In order to improve boot time with emmc, add ability to send CMD0
and CMD1 early in romstage. This way, by the time system boots to
payload, we are ready to continue with emmc setup and we don't need
to send CMD0 in payload again, and wait for card to reset and be ready.
BUG=b:78106689
TESTS = Boot to OS
Force early_mmc_wake_hw() to return error, recover in payload
Force an error in payload, make sure system can recover/boot
Change-Id: I3488b077bf5100a1e0f2c879fb1436105607d25e
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/25068
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Add a new post code POST_HW_INIT_FAILURE, used when coreboot fails to
detect or initialize a required hardware component.
BUG=b:124401932
BRANCH=sarien
TEST=build coreboot for sarien and arcada platforms
Change-Id: I73820d24b3e1c269d9d446a78ef4f97e167e3552
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32774
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Fill the DIMM serial number field for SMBIOS from the saved SPD
data that is returned by FSP.
BUG=b:132970635
TEST=This was tested on sarien to ensure that SMBIOS type 17
filled the serial number from the DIMM:
Handle 0x000B, DMI type 17, 40 bytes
Memory Device
Locator: DIMM-A
Serial Number: 41164beb
Change-Id: I85438bd1d581095ea3482dcf077a7f3389f1cd47
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32853
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lijian Zhao <lijian.zhao@intel.com>
Use CondRefOf to replace config optios for PTS/WAK acpi method dynamic
loading. Then we can move EC PTS and WAK method to be under mainboard.
BUG=N/A
TEST=Build sarien source code, check build/dsdt.dsl have EC.PTS method
included, build whlrvp soure, check build/dsdt.dsl don't have EC.PTS
method. Both able to build pass.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I9f4bd7240832caf070e65039e4ba2d8656371da8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32371
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Added macro named PAD_CFG_GPI_GPIO_DRIVER_SCI, for pads that need to be
configured as GPI, GPIO Driver mode, and SCI interrupt.
Also remove PAD_IRQ_CFG_DUAL_ROUTE macro (subsumed by
PAD_CFG_GPI_IRQ_WAKE).
BUG=none
BRANCH=none
TEST=Compiles
Change-Id: I0332c64e2fa62ce29c772444606adbfdf9c9afc4
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32485
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
For GPIO pads that are configured as no-connect (PAD_NC), setting it
as GPI (with Rx enabled) leads to GPE0_STS being set
incorrectly. Though this is not an issue in practice (GPE0_EN is not
set, so no events triggered), it can confuse users when debugging GPE
related issues.
This change configures PAD_NC to have Rx disabled along with Tx to
ensure that it does not end up setting GPE0_STS bits for unwanted
GPIO pads.
P.S.: IOSSTATE config does not have a TxDRxD setting, so leaving that
configuration as is.
BUG=b:129235068
TEST=Verified that GPE0_STS bits are not set for pads that are marked
as PAD_NC.
Change-Id: I726cc7b86a94e7449352cd8a8806d4d775c593dc
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Add support to reset the GPI Interrupt Status & Enable registers so that
the system does not experience any interrupt storm from a GPI when it
comes out of one of the sleep states.
BUG=b:130593883
BRANCH=None
TEST=Ensure that the Interrupt status & enable registers are reset
during the boot up. Ensure that the system boots fine to ChromeOS.
Change-Id: I99f36d88cbab8bb75f12ab1a4d06437f837841cb
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Add the offset information for GPI interrupt status and enable register
in the pad_community structure. Populate the concerned information for
individual SoCs. This offset information is required to clear the
interrupt configuration during the bootup.
BUG=b:130593883
BRANCH=None
TEST=Ensure that the interrupt configuration are cleared during bootup.
Ensured that the system boots to ChromeOS.
Change-Id: I8af877a734e8d49b700d720b736da8764985a8f8
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
