This patch adds Lewisburg C62x Series PCH support by adding the
Production and Super SKUs of the following PCI devices:
- LPC or eSPI Controllers,
- PCI Express Root Ports,
- SSATA and SATA Controllers,
- SMBus,
- SPI Controller,
- ME/HECI,
- Audio,
- P2SB,
- Power Management Controller.
These changes are in accordance with the documentation:
[*] page 39, Intel(R) C620 Series Chipset Platform Controller Hub
(PCH) Datasheet, May 2019. Document Number: 336067-007US
Change-Id: I7eaf2c1bb725ffed66f86c023c415ad17fe5793d
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Add a generic SuperIO ACPI generator, dropping the need to include
additional code in DSDT for SuperIO.
It generates a device HID based on the decoded I/O range.
Tested on Supermicro X11SSH-TF using AST2400.
The SSDT contains no errors and all devices are present.
Possible TODOs:
* Add "enter config" and "exit config" bytes
* Generate support methods to enter and exit config mode
* Generate support methods to query, change or disable current
resource settings on specific LDNs
Change-Id: I2716ae0580d68e5d4fcc484cb1648a2cdc1f4ca0
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33033
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Some USB 3.0 devices fail to be enumerated after USB reset, and xhci
port status register shows the device is disconnected. After measuring
the USB signal, we found that the USB disconnect threshold was lower and
that the disconnect event was triggered unexpectedly.
USB designers suggest changing discth to 15.
BUG=b:122047652
TEST=emerge-kukui coreboot chromeos-bootimage
Change-Id: I0e8556035b49d693a42cbe1099a6882a1c0ed0d1
Signed-off-by: Changqi Hu <changqi.hu@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35150
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Vendor only does dummy reads right after JEDEC init is finished
and dram init was marked as finished.
Dummy reads also make much more sense after JEDEC init as a way to
send a few JEDEC commands, presumably as a way to make sure it is
ready.
TESTED on ga-g41m-es2l (still boots fine)
Change-Id: I8069f9c08ad5e5268ddbe3711d58bc42522f938c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/20979
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
To support multi digists the tlcl_extend() for TPM2 expects
TPML_DIGEST_VALUE pointer as input argument.
BUG=N/A
TEST=Build binary and verified logging on Facebook FBG-1701
Change-Id: I8d86c41c23e4e93a84e0527d7cddcfd30d5d8394
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lance Zhao <lance.zhao@gmail.com>
Currently SPI vendor IDs are magic numbers in spi_flash.c. These definitions
are needed for AMD's fch_spi. So add the definitions to spi_generic.h and use
it at spi_flash.c
BUG=b:136595978
TEST=Build test of several platforms that don't use stoneyridge. Build and boot
grunt (using stoneyridge new fch_spi).
Change-Id: Ie39485d8c092151db8c9d88afaf02e19c507c93f
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35240
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin Roth <martinroth@google.com>
Padmelon board code was written for Merlin Falcon (family 15h models 60h-6fh),
but as the needed binaries are not yet merged (commit 33615), a config
HAVE_MERLINFALCON_BINARIES was added. If the binaries are not available,
the board defaults to Prairie Falcon, which use the same binaries as Stoney
Ridge. Once the binaries are merged, the config will be eliminated. Fan
control is done through F81803A SIO, and IRQ/GPIO and other board
characteristics are the same regardless of Merlin Falcon or Prairie Falcon.
Padmelon board was created to accept Prairie Falcon, Brown Falcon and Merlin
Falcon. The requested development was for Merlin Falcon. There are some small
spec changes (such as number of memory channels) between SOCs. Brown Falcon
was not investigated, Prairie Falcon is very similar to Stoney Ridge.
Started from Gardenia code, added changes created by Marc Jones and finally
revised against schematic, which added changes to GPIO settings.
BUG=none.
TEST=Both versions tested and boot to Linux using SeaBIOS.
Change-Id: I5a366ddeb4cfebd177a8744f6edb87aecd4787dd
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
The P2SB PCI device can be "hidden", which causes all sorts of
nightmares and bugs. Moreover, FSP tends to hide it, so finding
a good solution to this problem is impossible with FSP into the mix.
Since the values for IBDF and HBDF were already hardcoded as FSP
parameters, define them as macros and use these values directly to
generate the DRHD.
Change-Id: I7eb20182380b953a1842083e7a3c67919d6971b9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mimoja <coreboot@mimoja.de>
Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
tsc_freq_mhz() had a static table of Intel CPU families and crystal
clock, but it is possible to calculate the crystal clock speed dynamically,
and this is preferred over hardcoded table.
On SKL/KBL/CML CPUID.15h.ecx = nominal core crystal clock = 0 Hz
hence we had to use static table to calculate crystal clock.
Recommendation is to make use of CPUID.16h where crystal clock frequency
was not reported by CPUID.15h to calculate the crystal clock.
BUG=b:139798422, b:129839774
TEST=Able to build and boot KBL/CML/ICL.
Change-Id: If660a4b8d12e54b39252bce62bcc0ffcc967f5da
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35148
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Summary:
This patch calls monolake board specific function to query
settings stored in VPD binary blob to configure FSP UPD
variable HyperThreading.
Test Plan:
* Build an OCP MonoLake coreboot image, run following command
to initialize RW_VPD and insert HyperThreading key:
vpd -f build/coreboot.rom -O -i RW_VPD -s 'HyperThreading=0'
* Flash the image to MonoLake, boot and observe following
message in boot log:
Detected 16 CPU threads
If RW_VPD partition does not exist, or if HyperThreading
key/value pair does not exist, the boot log has:
Detected 32 CPU threads
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I799d27734fe4b67cd1f40cae710151a01562b1b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Summary:
Added a framework to search VPD in romstage before memory is
avilable. vpd_cbmem.c and vpd_premem.c are added for
code specific for premem environment and for environment that
cbmem can be used.
Since global variable is forbidden in romstage. A CAR_GLOBAL
variable is defined in vpd.c. This variable holds VPD binary
blobs' base address and size from memory mapped flash.
The overall flow is:
* The CAR variable g_vpd_blob is initialized if it was not,
either at romstage (before FSP-M execution in case of FSP UPD
customization), or at ramstage.
* At ramstage, during CBMEM_INIT, the VPD binary blob contents
are copied into CBMEM.
* At vpd_find() which may be called at romstage or at ramstage,
it sets storage for a local struct vpd_blob variable.
* The variable gets contents duplicated from g_vpd_blob, if
vpd_find() is called at romstage.
* The variable gets contents obtained from CBMEM, if vpd_find()
is called at ramstage.
Added a call vpd_get_bool(). Given a key/value pair in VPD
binary blob, and name of a bool type variable, set the variable
value if there is a match.
Several checks are in place:
* The key/value length needs to be correct.
* The key name needs to match.
* THe value is either '1' or '0'.
Test Plan:
* Build an OCP MonoLake coreboot image, flash and run.
Tags:
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Iebdba59419a555147fc40391cf17cc6879d9e1b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Fastboot support in vboot_reference is unused, unmaintained, and
produces compile errors when enabled. Since there is no current
or planned use cases for fastboot, remove it.
BUG=b:124141368, chromium:995172
TEST=make clean && make test-abuild
BRANCH=none
Change-Id: I06ea816ffb910163ec2c3c456b3c09408c806d0b
Signed-off-by: Joel Kitching <kitching@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35002
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
* Add Kconfig to enable TXT
* Add possibility to add BIOS and SINIT ACMs
* Set default BIOS ACM alignment
* Increase FIT space if TXT is enabled
The following commits depend on the basic Kconfig infrastructure.
Intel TXT isn't supported until all following commits are merged.
Change-Id: I5f0f956d2b7ba43d4e7e0062803c6d8ba569a052
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
This format of PCH GPIOs configuration, unlike the raw DW0 and DW1 [1]
registers values from the inteltool dump, is more understandable and
makes the code much cleaner. The pad configuration in this patch was
generated using the pch-pads-parser utility [2]. The inteltool dump
before and after the patch is identical (see notes)
Notes:
1. For some reason, GPIO RX State (RO) for the GPP_F4 and GPP_G10
changed the value to 0, but this doesn't affect the motherboard
operation. Perhaps this is because PAD_CFG1_GPIO_DRIVER is set to
PAD_CFG_GPI_INT(), and the pad is not actually connected. So far I
haven't circuit diagram to check this out.
2. According to the documentation [1], the value 3h for RXEVCFG is
implemented as setting 0h.
3. If the available macros from gpio_defs.h [3] can't determine the
configuration of the pad, the utility [2] generates common
_PAD_CFG_STRUCT() macros
[1] page 1429,Intel (R) 100 Series and Intel (R) C230 Series PCH
Family Platform Controller Hub (PCH), Datasheet, Vol 2 of 2,
February 2019, Document Number: 332691-003EN
[2] https://github.com/maxpoliak/pch-pads-parser/tree/stable_1.0
[3] src/soc/intel/common/block/include/intelblocks/gpio_defs.h
Change-Id: I01ad4bd29235fbe2b23abce5fbaaa7e63c87f529
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Add support for the X11SSH-TF which is based on Intel KBL.
Working:
* SeaBIOS payload
* LinuxBoot payload
* IPMI of BMC
* PCIe, SATA, USB and M.2 ports
* RS232 serial
* Native graphics init
Not working:
* TianoCore doesn't work yet as the Aspeed NGI is text mode only.
* Intel SGX, due to random crashes in soc/intel/common
For more details have a look at the documentation.
Please apply those patches as well for good user experience:
Ica0c20255f661dd61edc3a7d15646b7447c4658e
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Change-Id: I2edaa4a928de3a065e517c0f20e3302b4b702323
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
Platforms using postcar are with RELOCATABLE_RAMSTAGE=y. They
don't benefit from having low-memory set as writeback-cacheable.
This also fixes regression from CB:34893 that caused some random
hangs with more recent intel SoCs in ramstage.
BUG=b:140250314
Change-Id: Ia66910a6c85286f5c05823b87d48edc7e4ad9541
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
