The lb_serial structure had some new entries added, which were not being
filled in.
Fill in the values so they're not undefined.
Addresses coverity error 1354778 - Uninitialized scalar variable
Change-Id: I57f024c35f79397d0e9fd0c800b1b0f4075caac1
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/17483
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
RW flag was added to spi_slave structure to get around a requirement on
some AMD flash controllers that need to group together all spi volatile
operations (write/erase). This rw flag is not a property or attribute of
the SPI slave or controller. Thus, instead of saving it in spi_slave
structure, clean up the SPI flash driver interface. This allows
chipsets/mainboards (that require volatile operations to be grouped) to
indicate beginning and end of such grouped operations.
New user APIs are added to allow users to perform probe, read, write,
erase, volatile group begin and end operations. Callbacks defined in
spi_flash structure are expected to be used only by the SPI flash
driver. Any chipset that requires grouping of volatile operations can
select the newly added Kconfig option SPI_FLASH_HAS_VOLATILE_GROUP and
define callbacks for chipset_volatile_group_{begin,end}.
spi_claim_bus/spi_release_bus calls have been removed from the SPI flash
chip drivers which end up calling do_spi_flash_cmd since it already has
required calls for claiming and releasing SPI bus before performing a
read/write operation.
BUG=None
BRANCH=None
TEST=Compiles successfully.
Change-Id: Idfc052e82ec15b6c9fa874cee7a61bd06e923fbf
Signed-off-by: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: https://review.coreboot.org/17462
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Compiled romstage is over 64kiB and exceeded XIP_ROM_SIZE,
so it was not entirely set WRPROT cacheable.
Reduces first boot raminit (including training) time by 400ms.
Change-Id: I5c4cbf581fc845150f207087c1527338ca364f60
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17488
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
SPD data alone consumes 0x400 of pre-ram stack, so the guard was
initially set too high, printing spurious "smashed stack detected"
messages at end of romstage.
Use the same stack size as haswell.
Change-Id: I24fff6228bc5207750a3c4bf8cf34e91cf35e716
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17501
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Adapt implementation from haswell to prepare for removal of HIGH_MEMORY_SAVE
and moving on to RELOCATABLE_RAMSTAGE. With the change, CBMEM and SMM regions
are set to WRBACK with MTRRs and romstage ram stack is moved to CBMEM.
Also fixes regression of slower S3 resume path after commit
9b99152 intel/sandybridge: Use common ACPI S3 recovery
Skipping low memory backup and using stage cache for ramstage decreases
time spent on S3 resume path by 50 ms on samsung/lumpy.
Change-Id: I2afee3662e73e8e629188258b2f4119e02d60305
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15790
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Certain platforms have a poorly performing SPI prefetcher so even if
accessing MMIO BIOS once the fetch time can be impacted. Payload
loading is one example where it can be impacted. Therefore, add the
ability for a platform to reconfigure the currently running CPU's
variable MTRR settings for the duration of coreboot's execution.
The function mtrr_use_temp_range() is added which uses the previous
MTRR solution as a basis along with a new range and type to use.
A new solution is calculated with the updated settings and the
original solution is put back prior to exiting coreboot into the OS
or payload.
Using this patch on apollolake reduced depthcharge payload loading
by 75 ms.
BUG=chrome-os-partner:56656,chrome-os-partner:59682
Change-Id: If87ee6f88e0ab0a463eafa35f89a5f7a7ad0fb85
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17371
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Have a common romstage.c file to prepare CAR stack guards.
MTRR setup around cbmem_top() is somewhat northbridge specific,
place stubs under northbridge for platrform that will move
to RELOCATABLE_RAMSTAGE.
Change-Id: I3d4fe4145894e83e5980dc2a7bbb8a91acecb3c6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15762
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Fix regression, S3 resume not working on sandy/ivy after commit
9d6f365 ACPI S3: Remove HIGH_MEMORY_SAVE where possible
There is some 20ms delay with ACPI S3 wakeup time due to MTRR setup
being done after the backup copy. Moving to RELOCATABLE_RAMSTAGE fixes
this delay by removing need of this backup entirely.
Change-Id: Ib72ff914f5dfef8611f5f6cf9687495779013b02
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15248
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Newer AMD families have multiple models within them, each often
requiring unique support. The chip_name files were starting to
have a lot of duplication. Specify the model in the name, as well
as the family.
Change-Id: I236b260e2a565e212c486347c4a633eadcdf0042
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/17187
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
Add implementation to use actual requirements of ramstage size
for S3 resume backup in CBMEM. The backup covers complete pages of 4 KiB.
Only the required amount of low memory is backed up when ACPI_TINY_LOWMEM_BACKUP
is selected for the platform. Enable this option for AGESA and binaryPI, other
platforms (without RELOCATABLE_RAMSTAGE) currently keep their romstage ramstack
in low memory for s3 resume path.
Change-Id: Ide7ce013f3727c2928cdb00fbcc7e7e84e859ff1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15255
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins)
Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com>
Move old sockets to use romstage_legacy.c, these are ones
using intel/car/cache_as_ram.inc.
These will not be converted to RELOCATABLE_RAMSTAGE as boards
are candidates for getting dropped from the tree anyways.
Change-Id: I2616b4edee53446f1875711291e9dfed2911e2fb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/17280
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
All current implementations of ramstage_cache_invalid() were just
resetting the system based on the RESET_ON_INVALID_RAMSTAGE_CACHE
Kconfig option. Move that behavior to a single implementation
within prog_loaders.c which removes duplication.
Change-Id: I67aae73f9e1305732f90d947fe57c5aaf66ada9e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/17184
Tested-by: build bot (Jenkins)
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The CPU_MICROCODE_BLOB_CBFS_LOC should only be specified for COREBOOT CBFS,
not for other CBFS.
BUG=none
BRANCH=none
TEST=Built and boot kunimitsu
Change-Id: I58bb289e6c9add2647876ef817b7920f6e7b427a
Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com>
Reviewed-on: https://review.coreboot.org/16932
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
An epic battle to fix Nehalem finally ended when we found an odd mask
set in SMRR. This was caused by a wrong calculation of TSEG size. It
was assumed that TSEG spans the whole space between TSEG base
and GTT. This is wrong as TSEG base might have been aligned down.
TEST: On X201, copied 1GiB from usb key to sd-card and verified.
Change-Id: Id8c8a656446f092629fe2517f043e3c6d0f1b6b7
Found-by: Alexander Couzens, Nico Huber
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/16939
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The datasheets "Intel® Core™ Duo Processor and Intel® Core™ Solo
Processor on 65 nm Process" mentions cpu C-states substates which can
either be attained by adding a substate hint to the MWAIT/P_LVLx request
or automatically by setting some msr bits correctly.
This just sets the same msr bits as model_6fx to enable
dynamic L2 cache, C2E and C4E acpi cpu states.
The result is that when limiting a thinkpad x60 with a yonah T2400
cpu to the acpi cpu C2 state, the idle power usage drops from 18W to
14W. When the lowest C-state is set to C4 the idle power usage seems
to remain similar.
Change-Id: I6c422656ace04659f32082a5944617eda6c79ec3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/16901
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
cpu/amd/model_fxx.
Change-Id: Iac7571956ed2fb927a6b8cc88514e533f40490d0
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16437
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Replace the use of the old device_t definition inside
cpu/amd/family_10h-family_15h.
Change-Id: Ia1b155eeb7b67d94cf7aaa7789843a3e4ed3497a
Signed-off-by: Antonello Dettori <dev@dettori.io>
Reviewed-on: https://review.coreboot.org/16436
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
Move the funtion to find most significant bit set(fms)
and function to find least significant bit set(fls) to a common
place. And remove the duplicates.
Change-Id: Ia821038b622d93e7f719c18e5ee3e8112de66a53
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/16525
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Hardcoding the microcode filenames into the makefiles is great when
the microcode is in the blobs directory. When the microcode isn't
posted to the blobs directory, we need some method of supplying the
microcode binary into the build. This can of course be done manually
after the build has completed, as can be done with everything that
we're including in the ROM image. Instead of making life hard for
everyone though, let's just add a way to specify where the microcode
rom comes from.
BUG=chrome-os-partner:53013
Change-Id: I7c5127234809e8515906efa56c04af6005eecf0b
Signed-off-by: Martin Roth <martinroth@chromium.org>
Reviewed-on: https://review.coreboot.org/16386
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Omar Pakker
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Provide a default value of 0 in drivers/spi as there weren't
default values aside from specific mainboards and arch/x86.
Remove any default 0 values while noting to keep the option's
default to 0.
BUG=chrome-os-partner:56151
Change-Id: If9ef585e011a46b5cd152a03e41d545b36355a61
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16192
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Almost all boards and chipsets within the codebase assume or
use SPI flash as the boot device. Therefore, provide an option
for the boards/chipsets which don't currently support SPI flash
as the boot device. The default is to assume SPI flash is the
boot device unless otherwise instructed. This falls in line
with the current assumptions, but it also allows one to
differentiate a platform desiring SPI flash support while it not
being the actual boot device.
One thing to note is that while google/daisy does boot with SPI
flash part no SPI API interfaces were ever implemented. Therefore,
mark that board as not having a SPI boot device.
BUG=chrome-os-partner:56151
Change-Id: Id4e0b4ec5e440e41421fbb6d0ca2be4185b62a6e
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/16191
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
> Overrunning array "am335x_gpio_banks" of 4 4-byte elements at element
> index 4 (byte offset 16) using index "bank" (which evaluates to 4).
As the first index is 0, also error out if the index is equal the array
size.
Change-Id: I6b6b6e010348a58931bd546dfc54f08460e8dbbc
Found-by: Coverity (CID 1354615: Memory - illegal accesses (OVERRUN))
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/16165
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Quark does not support the rdmsr and wrmsr instructions. In this case
use a SOC specific routine to support the setting of the MTRRs. Migrate
the code from FSP 1.1 to be x86 CPU common.
Since all rdmsr/wrmsr accesses are being converted, fix the build
failure for quark in lib/reg_script.c. Move the soc_msr_x routines and
their depencies from romstage/mtrr.c to reg_access.c.
TEST=Build and run on Galileo Gen2
Change-Id: Ibc68e696d8066fbe2322f446d8c983d3f86052ea
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15839
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
XIP cachelines contain the executable to run, we never want
that to get modified. With the change such erronous writes
are ignored and next cacheline miss will fetch from boot
media (SPI / FWH flash).
Change-Id: I52b62866b5658e103281ffa1a91e1c64262f3175
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15778
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
At this state, variable MTRRs are disabled. We overwrite this MTRR entry
before they are re-enabled.
Change-Id: Ieedf90f65514d848905626e75be496e08f710d91
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/15794
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
The fixed MTRRs cover the range [0:1MiB). While calculating the
variable MTRR usage the 1MiB boundary is checked such that
an excessive number of MTRRs aren't used because of unnatural
alignment at the low end of the physical address space. Howevever,
those checks weren't inclusive of the 1MiB boundary. As such a
variable MTRR could be used for a range which is actually covered
by the fixed MTRRs when the end address is equal to 1MiB. Likewise,
if the starting address of the range lands on the 1MiB boundary
then more variable MTRRs are calculated in order to meet natural
alignment requirements.
Before:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 7/17.
MTRR: WB selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000007ffff00000 type 0
MTRR: 1 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 3 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 4 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 5 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 6 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
After:
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x0000000000100000 size 0x00060000 type 0
0x0000000000100000 - 0x000000007b800000 size 0x7b700000 type 6
0x000000007b800000 - 0x00000000b0000000 size 0x34800000 type 0
0x00000000b0000000 - 0x00000000c0000000 size 0x10000000 type 1
0x00000000c0000000 - 0x0000000100000000 size 0x40000000 type 0
0x0000000100000000 - 0x0000000180000000 size 0x80000000 type 6
CPU physical address size: 39 bits
MTRR: default type WB/UC MTRR counts: 6/8.
MTRR: WB selected as default type.
MTRR: 0 base 0x000000007b800000 mask 0x0000007fff800000 type 0
MTRR: 1 base 0x000000007c000000 mask 0x0000007ffc000000 type 0
MTRR: 2 base 0x0000000080000000 mask 0x0000007fe0000000 type 0
MTRR: 3 base 0x00000000a0000000 mask 0x0000007ff0000000 type 0
MTRR: 4 base 0x00000000b0000000 mask 0x0000007ff0000000 type 1
MTRR: 5 base 0x00000000c0000000 mask 0x0000007fc0000000 type 0
BUG=chrome-os-partner:55504
Change-Id: I7feab38dfe135f5e596c9e67520378a406aa6866
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/15780
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
