Now that the next generation of APUs is officially announced, we can
unmask morgana.
The chip formerly known as Morgana is actually Phoenix.
Surprise!
This patch just changes the name across the entire codebase.
Note that the fw.cfg file will stay pointing to the
3rdparty/amd_blobs/morgana/psp directory until the amd_blobs_repo is
updated.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: Ie9492a30ae9ff9cd7e15e0f2d239c32190ad4956
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71731
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
It has been reported that the PEIM graphics driver may temporarily
fail communication with the display if the time between libgfxinit
turning off the displays and the PEIM driver initialization is too
short. 200 ms has been identified as a safe delay.
This is a temporary workaround and an investigation is in progress to
come up with a better and long term solution.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is systematically seen
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71656
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If memory training is going to happen and early graphics is supported
by the mainboard, an on-screen text message is displayed to inform the
end user.
Memory training can take a while and an impatient end user facing a
black screen for a while may reset the device unnecessarily.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On screen text message during MRC training observed on skolas
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70300
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces an early graphics driver which can be used in
romstage in cache-as-ram mode. The implementation relies on
`libgfxinit' and provide VGA text mode support.
SoCs wanting to take advantage of this driver must implement the
`early_graphics_soc_panel_init' function to set the panel power
sequence timing parameters.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Graphics bring up observed on skolas with extra patches
Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve
real-time behaviour of the SoC (see Intel doc #640979). It describes,
amongst knobs for the OS, a couple of firmware settings that need to be
set properly to reduce latencies in all the subsystems. Things like
clock and power gating as well as low power states for peripherals and
buses are disabled in this scenario.
This patch takes the mentioned UEFI parameters from the guide and
translates them to FSP-M and FSP-S parameters. In addition, a chip
config switch guards this tuning which can be selected on mainboard
level if needed.
When this real-time tuning is enabled, the overall system performance
in a real-time environment can be increased by 2-3%.
Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3dafd6c030c0c848aa82b03bb336cc8fad14de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Not all ports have retimers. Add a property to denote that a particular
port has a retimer (instead of assuming that all ports have retimers).
BUG=b:263964979
TEST=Verified on guybrush; SSDT shows retimer-switch on port1 when
device tree is updated accordingly.
Change-Id: I754323236d2912777b63cede0fce2ccf7882cfea
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71663
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:263920313
TEST=Boot to OS on craask eMMC and NVMe SKUs with both unprovisioned
fw_config and fw_config set correctly.
Change-Id: I4167ee4d00b9ae8fe074c6f5e7a2d5a7382bfe6d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this (it
disables all probed devices when fw_config is unprovisioned).
BUG=b:251055188
TEST=Boot to OS on yaviks eMMC and UFS SKUs with both unprovisioned
fw_config and fw_config set correctly.
On UFS SKU with fw_config set, eMMC no longer shows up in lspci.
(On eMMC SKU, UFS and ISH were already disabled by the coreboot PCI scan
so there's no change in behaviour.)
Change-Id: I31402cb49cffefd98b6fed971f249528448b1d0d
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71725
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
IFDv1 always has 8 regions, while IFDv2 always has 16 regions.
It's platform specific which regions are used or are reserved.
The 'SPI programming guide' as the name says is a guide only,
not a specification what the hardware actually does.
The best to do is not to rely on the guide, but detect how many
regions are present in the IFD and expose them all.
Very early IFDv2 chipsets, sometimes unofficially referred to as
IFDv1.5 platforms, only have 8 regions. To not corrupt the IFD when
operating on an IFDv1.5 detect how much space is actually present
in the IFD.
Fixes IFD corruption on Wellsburg/Lynxpoint when writing a new
flash layout.
Change-Id: I0e3f23ec580b8b8402eb1bf165e3995c8db633f1
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68780
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When the watchdog timer reaches 0, the timer value won't reset to the
default value unless there is an external reset or a kick. It will
result in the watchdog failing to trigger the reset signal.
We kick the watchdog to reset the timer to the default value. Also,
because WDT hardware needs about 94us to synchronize the registers,
add a 100us delay before triggering the reset signal.
BUG=b:264003005, b:264017048
BRANCH=corsola
TEST= Reboot successfully with the following cmd
stop daisydog
sleep 60 > /dev/watchdog&
Signed-off-by: Runyang Chen <runyang.chen@mediatek.corp-partner.google.com>
Signed-off-by: Kuan-Hsun Cheng <allen-kh.cheng@mediatek.com>
Change-Id: Ic4964103d54910c4a1e675b59c362e93c2213b19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71754
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
When AP boots up after Cr50 firmware update and reboot, AP finds
that Cr50 reset is required for Cr50 to pick the new firmware so
it trigger Cr50 reset and power off the system, AP expects system
will power on automatically after Cr50 reset. However this is not
the case for Chromebox, Chromebox EC set AP_IDLE flag when system
is shutting down, when AP_IDLE flag is set in EC, the system stays
at S5/G3 and wait for power button presssend. It cause an issue in
factory that the operator needs to press power button to power on
the DUT after Cr50 firmware update.
This patch sends EC command to direct EC to clear AP_IDLE flag
after AP shutdown so AP can boot up when Cr50 reset.
BUG=b:261119366
BRANCH=firmware-brya-14505.B
TEST=DUT boots up after Cr50 firmware update in factory test flow
Change-Id: If97ffbe65f4783f17f4747a87b0bf89a2b021a3b
Signed-off-by: Derek Huang <derekhuang@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70773
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces a new config named `DEFAULT_ADL_NEM` and
allows respective brya variants with Alder Lake ESx samples to
choose NEM over eNEM as eNEM was fuse disabled till ESx.
TEST=The boot flow related to eNEM and NEM behaviour remains the
same with and without this patch.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ibbd492a3d210739120c7ad16415cb7912f5b70ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
