The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/rex.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Idc40045445cccc5b34fb49901d9ef548f2f0560b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71986
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/hatch.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I05a2fab75c3d931651885db0003ab8c5748a1568
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71934
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I73bac9560d0ff315d6fe6f4efc3ee9011f77c660
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72036
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Iccf37a340880e4b5a18f51c3add9a15a74e1d7b4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72030
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I55fa5941a9255f60c2aa23b90d16cf342d6f458f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72032
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: If069e66f2762eb373d35d635c09226ac5be99c7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72039
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I02fe236506abbc0d97982747cfcf3c0e9ef4897a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72040
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I8135dc918cb04c854dc003966b7657806a42bad9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72042
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I12497d46e58aae41ec8dcb5d567267579dc12fc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72041
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I349a2b24ecdee347548b5c7b292c5075e6150a19
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72033
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
This patch refactors the mainboard_romstage_entry() function to avoid
redundant chipset programming caused by global reset due to CSE FW
sync operation. Hence, keeping only the minimal and mandatory
operations required to perform CSE FW sync successfully.
This would help to optimize the boot flow by removing redundant
programming like SA, SMBUS twice in every CSE FW update path.
TEST=Able to build and boot Google/Rex successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1a13fac1e99341991d8dd818d4ab8a20d209a94c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71933
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch refactors the mainboard_romstage_entry() function to avoid
redundant chipset programming caused by global reset due to CSE FW
sync operation. Hence, keeping only the minimal and mandatory
operations required to perform CSE FW sync successfully.
This would help to optimize the boot flow by removing redundant
programming like SA, SMBUS twice in every CSE FW update path.
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iba9767ef51d7fc7ecf9de14454105865433ba041
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71932
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Now that multiple platforms are trying to initialize eMMC in coreboot
instead of depthcharge, lets move common functionality into commonlib
instead of copying the same functionality between multiple platforms.
Note for consistency, changed name of set_early_mmc_wake_status() to
mmc_set_early_wake_status(). Also adding an mmc_send_cmd1() function
for retrieving the Operating Conditions Register (OCR) contents.
BUG=b:218406702
BRANCH=None
TEST=emerge-herobrine coreboot chromeos-bootimage
flash onto villager device and make sure still boots ChromeOS
Change-Id: Id00535b05bbd379081712601ef10e762c1831747
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71827
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
MSR_PPIN_CTL may need to be read more than once, so lock PPIN CTL
MSR at a late BS_PAYLOAD_LOAD boot state.
This MSR is in platform scope and must only be locked once on each
socket. Add a spinlock to do so.
Tested=On OCP Craterlake single socket, rdmsr -a 0x04e shows 1.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Change-Id: I8deb086339267cf36e41e16f189e1378f20b82f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Use 'enum cb_err' values for below cse lite functions instead of true or
false.
Functions whose return values updated in this patch:
1. cse_set_next_boot_partition()
2. cse_data_clear_request()
3. cse_set_and_boot_from_next_bp()
4. cse_boot_to_rw()
5. cse_fix_data_failure_err()
TEST= Do boot test on Gimble.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I7fec530aeb617bab87304aae85ed248e51a6966b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Fix:
cc1: error: 3rdparty/blobs/mainboard/asrock/h110m: No such file or directory [-Werror=missing-include-dirs]
cc1: error: 3rdparty/blobs/mainboard/acer/aspire_vn7_572g: No such file or directory [-Werror=missing-include-dirs]
...
Change-Id: Icc43e40514a12944fa180197ffe3230ff9800de9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
It has been reported that the PEIM graphics driver may temporarily
fail communication with the display if the time between libgfxinit
turning off the displays and the PEIM driver initialization is too
short. 200 ms has been identified as a safe delay.
This is a temporary workaround and an investigation is in progress to
come up with a better and long term solution.
BUG=b:264526798
BRANCH=firmware-brya-14505.B
TEST=Developer screen is systematically seen
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de1
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71656
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
If memory training is going to happen and early graphics is supported
by the mainboard, an on-screen text message is displayed to inform the
end user.
Memory training can take a while and an impatient end user facing a
black screen for a while may reset the device unnecessarily.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=On screen text message during MRC training observed on skolas
Change-Id: I4ea15123eed1a4355c5ff7d815925032d4151de0
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70300
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces an early graphics driver which can be used in
romstage in cache-as-ram mode. The implementation relies on
`libgfxinit' and provide VGA text mode support.
SoCs wanting to take advantage of this driver must implement the
`early_graphics_soc_panel_init' function to set the panel power
sequence timing parameters.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Graphics bring up observed on skolas with extra patches
Change-Id: Ie4ad1215e5fadd0adc1271b6bd6ddb0ea258cb5b
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70299
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Intel provides a Real-Time Tuning Guide for Elkhart Lake to improve
real-time behaviour of the SoC (see Intel doc #640979). It describes,
amongst knobs for the OS, a couple of firmware settings that need to be
set properly to reduce latencies in all the subsystems. Things like
clock and power gating as well as low power states for peripherals and
buses are disabled in this scenario.
This patch takes the mentioned UEFI parameters from the guide and
translates them to FSP-M and FSP-S parameters. In addition, a chip
config switch guards this tuning which can be selected on mainboard
level if needed.
When this real-time tuning is enabled, the overall system performance
in a real-time environment can be increased by 2-3%.
Change-Id: Ib524ddd675fb3ea270bacf8cd06cb628e895b4b6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3dafd6c030c0c848aa82b03bb336cc8fad14de3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71627
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
pertinent header file
This patch moves ME host firmware status register structures to ME
header file. It also marks unused structure fields to reserved.
The idea here is to decouple ME specification defined structures from
the source file `.c` and keep those into header files so that in future
those spec defined header can move into common code.
The current and future SoC platform will be able to select the correct
ME spec header based on the applicable config. It might be also
beneficial if two different SoC platforms would like to use the same
ME specification and not necessarilly share the same SoC directory.
BUG=b:260309647
Test=Able to build and boot Google/brya.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ic14305b0479a8c57531d9930946eded7ac518b09
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71625
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch that introduced the selection of software connection manager,
CB:64561 - 060df17f1d (soc/intel/alderlake/acpi: Add Kconfig options for
SCM and FCM) added a default to enable the software configuration
manager directly in the choice.
This leads to warnings when running make menuconfig:
src/soc/intel/alderlake/Kconfig:439:
warning: defaults for choice values not supported
src/soc/intel/meteorlake/Kconfig:337:
warning: defaults for choice values not supported
src/soc/intel/tigerlake/Kconfig:299:
warning: defaults for choice values not supported
I'm not sure why the Kconfig linter didn't catch this, but this
issue is currently breaking the build for me. This patch fixes
it so that instead of setting the default directly, a new Kconfig
value is selected that then sets the default correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I674046a93af8f7c2f3003900804deefa89dae295
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71776
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
A mainboard port needs to:
- select `CONFIG_MAINBOARD_HAS_EARLY_LIBGFXINIT'
- implement the Ada package `GMA.Mainboard' with a single function
`ports' that returns a list of ports to be probed for displays.
- set the desired `GFX_GMA_DEFAULT_MMIO' IO memory address to use
in romstage (and ramstage) for the graphic device.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=libgfxinit compiles in romstage.
libgfxinit successfully executes in romstage and ramstage using
the requested MMIO setting on skolas.
Change-Id: I3c2101de10dc5df54fe873e43bbe0f1c4dccff44
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70276
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
The patch adds Kconfigs to define scaling factor for Efficient and
Performance cores instead of using hard coded values in the soc code.
Also, the patches uses the Kconfigs directly to calculate the core's
nominal performance. So, we don't need to implement soc function
soc_get_scaling_factor() to get the scaling factor data for different
core types. Hence, soc_get_scaling_factor() function is removed.
TEST=Build the code for Gimble and Rex. Also, I have verified that
build system logs error when the Kconfigs are undefined.
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I55e4d815116ef40c5f33be64ab495e942bf35ee8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71687
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
In cases where there are limitations on the mainboard it can be
necessary to limit the used SATA speed even though both, the SATA
controller and disk drive support a higher speed rate. The FSP parameter
'SataSpeedLimit' allows to set the speed limit.
This patch provides a chip config so that this FSP parameter can be
set as needed in the devicetree on mainboard level.
Change-Id: I610263b34b0947378d2025211ece4a9ec8fbfef6
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71229
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
get_cpu_index() helper function returns cpu's index based on it's APIC
id position from the ascending order list of cpus' APIC IDs.
In order to calculate the cpu's index, the helper function needs to
traverse through each cpu node to find their APIC IDs. So, the function
traverse the CPU node list from the cpu whose APIC ID is 0 assuming it
is the first cpu node in the list. This logic works fine where BSP's
APIC ID is 0. But, starting from MTL, APIC ID for BSP need not be 0 as
APIC ID numbering first get assigned for CPU Die Efficient cores, then
Performance cores.
Please refer section# 6.1 of doc#643504 for more details on APIC IDs.
Considering the APIC Id allotment for MTL cores, as existing code
traversing begins from the cpu that has APIC Id#0 which may not be the
first cpu node in the list so index calculation results in wrong value.
The patch addresses above described issue by traversing all the CPU
nodes to calculate the cpu index. Also, prevents inconsistent report
of /sys/devices/system/cpu/cpu*/cpufreq/* and
/sys/devices/system/cpu/cpuXX/acpi_cppc on each reboot.
TEST=Verified that the get_cpu_index helper function returns the correct
index id for a CPU on Rex.
The coreboot log with code instrumentation, before this patch:
[DEBUG] my_apic_id:0x10 cpu_index: 0x6
[DEBUG] my_apic_id:0x11 cpu_index: 0x6
[DEBUG] my_apic_id:0x42 cpu_index: 0x6
[DEBUG] my_apic_id:0x21 cpu_index: 0x6
[DEBUG] my_apic_id:0x40 cpu_index: 0x6
[DEBUG] my_apic_id:0x31 cpu_index: 0x6
[DEBUG] my_apic_id:0x39 cpu_index: 0x6
[DEBUG] my_apic_id:0xa cpu_index: 0x3
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x8 cpu_index: 0x2
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x28 cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x38 cpu_index: 0x6
[DEBUG] my_apic_id:0x29 cpu_index: 0x6
[DEBUG] my_apic_id:0xe cpu_index: 0x5
[DEBUG] my_apic_id:0x6 cpu_index: 0x2
[DEBUG] my_apic_id:0x20 cpu_index: 0x6
[DEBUG] my_apic_id:0x30 cpu_index: 0x6
[DEBUG] my_apic_id:0x19 cpu_index: 0x6
[DEBUG] my_apic_id:0xc cpu_index: 0x4
[DEBUG] my_apic_id:0x18 cpu_index: 0x6
We can see same cpu_index for multiple cores before fix.
After this patch..
[DEBUG] my_apic_id:0x10 cpu_index: 0x8
[DEBUG] my_apic_id:019 cpu_index: 0xb
[DEBUG] my_apic_id:0x11 cpu_index: 0x9
[DEBUG] my_apic_id:0x18 cpu_index: 0xa
[DEBUG] my_apic_id:0x40 cpu_index: 0x14
[DEBUG] my_apic_id:0x30 cpu_index: 0x10
[DEBUG] my_apic_id:0x42 cpu_index: 0x15
[DEBUG] my_apic_id:0xc cpu_index: 0x6
[DEBUG] my_apic_id:0x2 cpu_index: 0x1
[DEBUG] my_apic_id:0x29 cpu_index: 0xf
[DEBUG] my_apic_id:0xe cpu_index: 0x7
[DEBUG] my_apic_id:0x20 cpu_index: 0xc
[DEBUG] my_apic_id:0x0 cpu_index: 0x0
[DEBUG] my_apic_id:0x31 cpu_index: 0x11
[DEBUG] my_apic_id:0x28 cpu_index: 0xe
[DEBUG] my_apic_id:0x21 cpu_index: 0xd
[DEBUG] my_apic_id:0xa cpu_index: 0x5
[DEBUG] my_apic_id:0x38 cpu_index: 0x12
[DEBUG] my_apic_id:0x8 cpu_index: 0x4
[DEBUG] my_apic_id:0x4 cpu_index: 0x2
[DEBUG] my_apic_id:0x39 cpu_index: 0x13
Change-Id: I69e5e6231dd18b43d439340aaed50eb9edeca3b7
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70751
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch makes the call into TXT lib in order to disable the TXT
if SoC user haven't selected the `INTEL_TXT` config. Disabling TXT
would be helpful to access VGA framebuffer prior calling into FSP-M.
TEST=Able to perform disable_txt and unlock memory which helped to
access VGA framebuffer prior calling into FSP-M.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9dd7c5492a5f45eef0dd9e836cc2da1844c78919
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71575
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
PRMRR is used by many Intel SOC features, not just Intel SGX.
As of now SGX and Key Locker are the features that need PRMRR.
Untie it from Intel SGX specific files and move to common cpulib.
Also rename PRMRR size config option. Use the renamed PRMRR size
config option to set the PRMRR size.
TEST=Able to set PRMRR size using config.
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: I0cd49a87be0293530705802fd9b830201a5863c2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70819
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Also disable TCO timer through calling tco_configure().
If tco_configure() is not called, the TCO timeout would
trigger SMI periodically about every 2 seconds with SMM log:
"TCO_STS: BIT18 TIMEOUT"
Tested=On AC CRB, does not see periodic SMI log.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I2d307ad16109ae11862dd5e5acc0f12f47b22582
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71141
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
If cbmem_top is not 1M aligned there will be a hole between DPR base
and cbmem_top that the allocator will consider as unassigned memory.
Resources could incorrectly be assigned to that region and the final
MTRR solution will also try to skip that hole, therefore using a lot
more variable MTRRs than needed.
TESTED on Archer City 2S system: Uses 1 variable MTRR in the final
setup instead of 7.
Change-Id: I198f8d83bcfcdca3a770bd7f9a7060d5782a49fe
Signed-off-by: Arthur Heymans <arthur.heymans@9elements.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Software Connection Manager doesn't work with Linux 5.13 or later,
resulting in TBT ports timing out. Not advertising this results
in Firmware Connection Manager being used and TBT works
correctly.
Add Kconfig options to chose between SCM (Software Connection
Manager) and FCM (Firmware Connection Manager). FCM is primary, as
it's more compatible save for ChromeOS devices as ChromeOS uses
SCM.
Linux patch:
torvalds/linux@c6da62a
c6da62a219d028de10f2e22e93a34c7ee2b88d03
Tested with StarBook Mk VI (i7-1260P).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iac31d37c0873f41f7b14e1051fe214466d1ebdd8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
This patch adds the support to enable/disable package c-state demotion
feature from the devicetree based on mainboard requirement.
Port of commit 4be8d9e80d ("soc/intel/adl: Add support to configure
package c-state demotion")
BUG=none
TEST=Boot to the OS on Google/Rex.
Snippet from FSP log:
[SPEW ] PkgCState Demotion : 0x1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I0a4b0b181349ce41035524482add4336cf83a68b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71654
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
