The policy to identify and log the XHCI wake events is similar between
skylake and apollolake. Hence move the similar parts to a common
location.
BUG=b:123429132
BRANCH=None
TEST=Ensure that the system boots to ChromeOS. Ensure that the wake up
events due to USB are logged into the event logs.
6 | 2019-03-21 09:22:18 | S0ix Enter
7 | 2019-03-21 09:22:22 | S0ix Exit
8 | 2019-03-21 09:22:22 | Wake Source | PME - XHCI (USB 2.0 port) | 9
9 | 2019-03-21 09:22:22 | Wake Source | GPE # | 13
10 | 2019-03-21 09:23:20 | ACPI Enter | S3
11 | 2019-03-21 09:23:30 | Wake Source | PME - XHCI (USB 2.0 port) | 9
12 | 2019-03-21 09:23:30 | ACPI Wake | S3
13 | 2019-03-21 09:23:30 | Wake Source | GPE # | 13
Change-Id: Ia6643342e3292984e422ff3c3fcd4bc0d99f947e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31999
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
mainboard users can select correct MP Init Kconfig in order to
perform MP initialization.
1. Native coreboot MP Init.
2. FSP to do MP Init.
3. FSP to make use of coreboot MP service PPI to perform MP Initialization
Change-Id: Ifbea463fdaf97d68c21a759c37f49492d58a056b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Update the Kconfig option for disabling ESPI SMI source
to disable it entirely, not just when ACPI mode is disabled.
For the situations where this is needed (just the sarien
board) it is better to completely stop the EC from sending
any SMI events as no actions are taken.
Change-Id: Id94481bb2f0cfc948f350be45d360bfe40ddf018
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/31918
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
HDA support did not configure the codecs correclty.
Use Intel common block support to configure the codecs.
To use common Intel HDA support file hda.c file has been
removed and Braswell HDA device ID is added to list of
supported PCI devices in intel/common/block/hda/hda.c.
CONFIG_SOC_INTEL_COMMON_BLOCK and
CONFIG_SOC_INTEL_COMMON_BLOCK_HDA are enabled
to include hda.c in build.
When codec table is available at board level
SOC_INTEL_COMMON_BLOCK_HDA_VERB must be enabled
and a codec table must be supplied.
BUG=N/A
TEST=Facebook FBG-1701 ALC298 configuration
Change-Id: I5c23ec311e5b5a6dfd6f031aa19617407fe8ed63
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/29394
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
"mosys memory spd print all" returns incorrect memory ranks info.
This patch and 2 upcomming ones (one in FSP) will address the issue.
BUG=b:122329046
TEST=Boot to OS on Bobba variant of Octopus
BRANCH=octopus
Change-Id: I212215040e4786c258a9c604cc5c2bb62867c842
Signed-off-by: Francois Toguo <francois.toguo.fotso@intel.com>
Reviewed-on: https://review.coreboot.org/c/31235
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
According to doc 609208, bit 25 TOL_1V8 in GPP_F4 ~ GPP_F11 DW1
should be clear to prevent unexpected I2C behaviors.
BUG=b:124269499
TEST=boot on nami and check bit 25 TOL_1V8 is clear
Change-Id: I419ef3e89104ad3611e96bbe23a582504b45be0c
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/31368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
The default state of the HOSTSW_OWN register in the PCH is zero, which
configures GPIO pins for ACPI ownership. The board variabt GPIO tables
can request specific pins to be configured for GPIO driver ownership.
This change sets the HOSTSW_OWN ownership bit when requested and
explicitly clears the ownership bit if not requested.
BUG=b:120884290
BRANCH=none
TEST=Build coreboot on sarien. Verified UEFI to coreboot transition
boots successfully.
Change-Id: Ia82539dbbbc7cf5dfb9223902d563cafec1a73e5
Signed-off-by: Keith Short <keithshort@chromium.org>
Reviewed-on: https://review.coreboot.org/c/31209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Generate DMAR table if VTd feature is enabled.
Test=Booted into Linux on mc_apl2 and verified the DMAR table contents.
In addition turned off Vtd and verified that no DMAR table is generated
at all.
Change-Id: Ie3683a2f3578c141c691b2268e32f27ba2e772fa
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
In preparation of generating DMAR tables, provide the hook in SoC scope
for the systemagent to write ACPI tables. The complete functionality is
SoC-specific. Therefore the entry hook is defined as a weak function which
can be overridden by SoC code. If the SoC does not have support for
generating DMAR tables this hook will do no harm.
Change-Id: I1333ae2b79f1a855e6f3bb39bf534da170ddc9e1
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/30989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Intel RTC common code driver need to turn on RTC itself.After the
change, cannonlake and icelake platform will have RTC enabled.
BUG=b:123372643
TEST=build and boot up on sarien platform, check .config to see
CONFIG_RTC is set.
Signed-off-by: Lijian Zhao <lijian.zhao@intel.com>
Change-Id: I0c8c5cf9e6f7f338b1f2f784c04254649d257536
Reviewed-on: https://review.coreboot.org/c/31112
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This is spotted using "./util/lint/kconfig_lint"
While at it, do the check in C and not the preprocessor.
Change-Id: Icfda267936a23d9d14832116d67571f42f685906
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/31050
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
- Port the existing denverton tables to intelblock
- Add C-States table for denverton
Note: Removed code is functionally identical to corresponding
common code.
Tested-on: scaleway/tagada
Change-Id: Iee061a258a7b1cbf0a69bcfbf36ec2c623e84399
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25428
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
The ratio_max step is appearing twice when (ratio_max - ratio_min)
is evenly divisible by the ratio step.
This is because in this case there are no rounding down of ratio_max in
the for loop.
Thanks Jay Talbott for the step calculation algorithm.
Change-Id: I91090b4d87eb82b57055c24271d679d1cbb3b7a7
Signed-off-by: Julien Viard de Galbert <jviarddegalbert@online.net>
Reviewed-on: https://review.coreboot.org/c/25429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Add new helper macros to enable configuring debounce duration for a
GPIO input. Also ensure that the debounce configuration is not masked
out.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the debounce
duration is configured as expected.
Change-Id: I4e3cd7744867bcfbaed7d3d96fed4e561afb2cec
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Currently all the helpers support configuring GPIO_DW0/1 registers. In
some architectures there is an additional configuration GPIO_DW2 register
that can be used to configure debounce duration etc. Add a helper macro
to enable configuring GPIO_DW2 pad register.
BRANCH=octopus
BUG=b:117953118
TEST=Ensure that the system boots to ChromeOS. Ensure that the current
configuration is not disturbed by turning on the GPIO_DEBUG option and
verifying the debug output before and after the change.
Change-Id: I3e5d259d007fdc83940a43cc4cd4a2b8a547d334
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Reviewed-on: https://review.coreboot.org/c/30449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Some SPI controllers support both READ and WRITE protection
add a variable to the protect API for the callers to specify
the kind of protection they want (Read/Write/Both).
Also, update the callers and protect API implementation.
BUG=None
BRANCH=None
TEST=test that the mrc cache is protected as expected on soraka.
Also tried if the read protection is applied correctly.
Change-Id: I093884c4768b08a378f21242ac82e430ac013d15
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/30559
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Everything is wrong here, the Kconfig symbols are only the tip of the
iceberg. Based on Kconfig prompts the SoC code performed pad configu-
rations! I don't see why the person who configures coreboot should have
the board schematics at hand.
As a mitigation, we remove the prompts for UART_DEBUG, which is renamed
to INTEL_LPSS_UART_FOR_CONSOLE (because the former didn't really say
what it's about), and for UART_FOR_CONSOLE in case the former is selec-
ted.
Change-Id: Ibe2ed3cab0bb04bb23989c22da45299f088c758b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Link walkfcbfs.S in the C_ENVIRONMENT_BOOTBLOCK case and also in the
romstage.
This is useful for cbfs access in pre-CAR environments.
Change-Id: I9a17cdf01c7cbc3c9ac45ed1f075731f3e32f64b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/30681
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
The newest and most useful incarnation was hiding in soc/intel/common/.
We move it into the Mainboard menu and extend it with various flags to
be selected to control the default and which options are visible. Also
add a new `int` config MAINBOARD_POWER_FAILURE_STATE that moves the
boolean to int conversion into Kconfig:
0 - S5
1 - S0
2 - previous state
This patch focuses on the Kconfig code. The C code could be unified as
well, e.g. starting with a common enum and safe wrapper around the
get_option() call.
TEST=Did what-jenkins-does with and without this commit and compared
binaries. Nothing changed for the default configurations.
Change-Id: I61259f864c8a8cfc7099cc2699059f972fa056c0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/29680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Cases of *dev = PCI_DEV(b,d,f) are invalid. Not caught
because files only build with __SIMPLE_DEVICE__ defined.
Remove cases of testing __SIMPLE_DEVICE__ in files that
are not build for ramstage.
Change-Id: If10a0efa187c9b1d9a5577008aa46f050f0aa309
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/30497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
In some situations the GPIO pad numbers used by the OS are not
contiguous and coreboot must provide a way for ACPI to provide
the expected GPIO number to the OS.
To do this each GPIO group can now have a pad base value, which
will be used as the starting pin number for this group and it
is added to the relative pin number of this GPIO to compute the
ACPI pin number for a particular GPIO.
By default this change has no effect because the existing uses
of INTEL_GPP() will set the pad base to PAD_BASE_NONE and the
GPIO number is used as the ACPI pin number without translation.
BUG=b:120686247
TEST=tested on a sarien(cannonlake) board
Change-Id: I25f73df45ffae18c5721a00ca230a6b07c250bab
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/30131
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This patch introduces 3 helper function for cpuid(1) :
1. cpu_get_cpuid() -> to get processor id (from cpuid.eax)
2. cpu_get_feature_flags_ecx -> to get processor feature flag (from cpuid.ecx)
3. cpu_get_feature_flags_edx -> to get processor feature flag (from cpuid.edx)
Above 3 helper functions are targeted to replace majority of cpuid(1)
references.
Change-Id: Ib96a7c79dadb1feff0b8d58aa408b355fbb3bc50
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/30123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
