mb/system76: Use default GMA brightness levels

This reverts commit 1f81af52a4 ("mb/system76: Add custom backlight
levels for Intel GMA").

Defaulting to 40% can make the screen hard to read as System76's
firmware setup uses white text on a gray background.

Change-Id: I13ab3797319c4db6e800737a3f4e4344e3b588f3
Signed-off-by: Tim Crawford <tcrawford@system76.com>

.gitmodules

@@ -13,6 +13,9 @@
 [submodule "arm-trusted-firmware"]
 	path = 3rdparty/arm-trusted-firmware
 	url = https://review.coreboot.org/arm-trusted-firmware.git
+[submodule "3rdparty/chromeec"]
+	path = 3rdparty/chromeec
+	url = https://review.coreboot.org/chrome-ec.git
 [submodule "libhwbase"]
 	path = 3rdparty/libhwbase
 	url = https://review.coreboot.org/libhwbase.git
@@ -60,7 +63,7 @@
 	branch = stmpe
 [submodule "util/goswid"]
 	path = util/goswid
-	url = https://review.coreboot.org/goswid
+	url = https://review.coreboot.org/goswid.git
 	branch = trunk
 [submodule "src/vendorcode/amd/opensil/genoa_poc/opensil"]
 	path = src/vendorcode/amd/opensil/genoa_poc/opensil

AUTHORS

@@ -39,9 +39,7 @@ Alexandru Gagniuc
 Alexey Buyanov
 Alexey Vazhnov
 Alice Sell
-Alicja Michalska
 Allen-KH Cheng
-Alper Nebi Yasak
 Amanda Hwang
 American Megatrends International, LLC
 Amersel
@@ -64,7 +62,6 @@ Anna Karaś
 Annie Chen
 Anton Kochkov
 Ao Zhong
-Appukuttan V K
 Arashk Mahshidfar
 Arec Kao
 Ariel Fang
@@ -96,7 +93,6 @@ Bora Guvendik
 Boris Barbulovski
 Boris Mittelberg
 Brandon Breitenstein
-Brandon Weeks
 Brian Norris
 Bryant Ou
 Carl-Daniel Hailfinger
@@ -105,7 +101,6 @@ Caveh Jalali
 Cavium Inc.
 Chao Gui
 Chen-Tsung Hsieh
-Chen. Gang C
 Chia-Ling Hou
 Chien-Chih Tseng
 Chris Wang
@@ -133,7 +128,6 @@ Da Lao
 Daisuke Nojiri
 Damien Zammit
 Dan Callaghan
-Dan Campbell
 Daniel Campello
 Daniel Gröber
 Daniel Kang
@@ -187,7 +181,6 @@ Eltan B.V
 Eltan B.V.
 Elyes Haouas
 Eran Mitrani
-Eren Peng
 Eric Biederman
 Eric Lai
 Eric Peers
@@ -201,16 +194,13 @@ Evan Green
 Evgeny Zinoviev
 Fabian Groffen
 Fabian Kunkel
-Fabian Meyer
 Fabio Aiuto
 Fabrice Bellard
 Facebook, Inc.
-Fei Yan
 Felix Friedlander
 Felix Held
 Felix Singer
 Fengquan Chen
-Filip Lewiński
 Flora Fu
 Florian Laufenböck
 Francois Toguo Fotso
@@ -244,7 +234,6 @@ HardenedLinux
 Harsha B R
 Harshit Sharma
 Henry C Chen
-Herbert Wu
 Hewlett Packard Enterprise Development LP
 Hewlett-Packard Development Company, L.P.
 Himanshu Sahdev
@@ -297,7 +286,6 @@ Jason Zhao
 jason-ch chen
 Jason-jh Lin
 Jay Patel
-Jean Lucas
 Jeff Chase
 Jeff Daly
 Jeff Li
@@ -319,7 +307,6 @@ Jitao Shi
 Joe Pillow
 Joe Tessler
 Joel Kitching
-Joel Linn
 Joey Peng
 Johanna Schander
 John Su
@@ -338,7 +325,6 @@ Jordan Crouse
 Jörg Mische
 Joseph Smith
 Josie Nordrum
-Juan José García-Castro Crespo
 Julia Tsai
 Julian Schroeder
 Julian Stecklina
@@ -351,7 +337,6 @@ Kangheui Won
 Kapil Porwal
 Karol Zmyslowski
 Karthik Ramasubramanian
-Kei Hiroyoshi
 Keith Hui
 Keith Packard
 Kenneth Chan
@@ -382,11 +367,9 @@ Lawrence Chang
 Leah Rowe
 Lean Sheng Tan
 Lei Wen
-Lennart Eichhorn
 Lenovo Group Ltd
 Leo Chou
 Li-Ta Lo
-Li1 Feng
 Liam Flaherty
 Libra Li
 Libretrend LDA
@@ -414,7 +397,6 @@ Marc Bertens
 Marc Jones
 Marco Chen
 Marek Kasiewicz
-Marek Maślanka
 Marek Vasut
 Mario Scheithauer
 Marius Gröger
@@ -483,12 +465,10 @@ Myles Watson
 Nancy.Lin
 Naresh Solanki
 Nathan Lu
-Naveen R. Iyer
 Neill Corlett
 Network Appliance Inc.
 Nicholas Chin
 Nicholas Sielicki
-Nicholas Sudsgaard
 Nick Barker
 Nick Chen
 Nick Vaccaro
@@ -522,7 +502,6 @@ Paul Fagerburg
 Paul Menzel
 Paul2 Huang
 Paulo Alcantara
-Pavan Holla
 Pavel Sayekat
 Paz Zcharya
 PC Engines GmbH
@@ -541,7 +520,6 @@ Philipp Deppenwiese
 Philipp Hug
 Piotr Kleinschmidt
 Po Xu
-Poornima Tom
 Prasad Malisetty
 Prashant Malani
 Pratik Vishwakarma
@@ -551,7 +529,6 @@ Protectli
 Purism SPC
 Purism, SPC
 Qii Wang
-Qinghong Zeng
 Qualcomm Technologies, Inc.
 Quanta Computer INC
 Raihow Shi
@@ -595,7 +572,6 @@ Robinson P. Tryon
 Rockchip, Inc.
 Rocky Phagura
 Roger Lu
-Roger Wang
 Roja Rani Yarubandi
 Romain Lievin
 Roman Zippel
@@ -770,13 +746,11 @@ Wolfgang Denk
 Won Chung
 Wonkyu Kim
 Wuxy 
-Xiang W
 Xin Ji
 Xixi Chen
 Xuxin Xiong
 YADRO
 Yan Liu
-Yang Wu
 Yann Collet
 Yaroslav Kurlaev
 YH Lin
@@ -793,7 +767,6 @@ Yuanliding
 Yuchen He
 Yuchen Huang
 Yunlong Jia
-Yuval Peress
 Zachary Yedidia
 Zanxi Chen
 Zhanyong Wang
@@ -803,11 +776,10 @@ Zhi7 Li
 Zhiqiang Ma
 Zhixing Ma
 Zhiyong Tao
-Zhongtian Wu
+zhongtian wu
 Zhuohao Lee
 Ziang Wang
 Zoey Wu
 Zoltan Baldaszti
 小田喜陽彦
-忧郁沙茶
 陳建宏

Documentation/Makefile

@@ -31,7 +31,8 @@ livesphinx: $(BUILDDIR)
 
 test:
 	@echo "Test for logging purposes - Failing tests will not fail the build"
-	-$(MAKE) -f Makefile.sphinx clean && $(MAKE) -k -f Makefile.sphinx html
+	-$(MAKE) -f Makefile.sphinx clean && $(MAKE) -K -f Makefile.sphinx html
+	-$(MAKE) -f Makefile.sphinx clean && $(MAKE) -K -f Makefile.sphinx doctest
 
 help:
 	@echo "all            - Builds all documentation targets"

Documentation/Makefile.sphinx

@@ -1,20 +1,60 @@
 ## SPDX-License-Identifier: GPL-2.0-only
-# Minimal makefile for Sphinx documentation
+# Makefile for Sphinx documentation
 #
 
-# You can set these variables from the command line, and also
-# from the environment for the first two.
-SPHINXOPTS    ?=
-SPHINXBUILD   ?= sphinx-build
-SPHINXAUTOBUILD = sphinx-autobuild
-SOURCEDIR     = .
-BUILDDIR      = _build
+# You can set these variables from the command line.
+SPHINXOPTS        ?=
+SPHINXBUILD       = sphinx-build
+SPHINXAUTOBUILD   = sphinx-autobuild
+PAPER             =
+BUILDDIR          = _build
 
-# Put it first so that "make" without argument is like "make help".
+# Internal variables.
+PAPEROPT_a4     = -D latex_paper_size=a4
+PAPEROPT_letter = -D latex_paper_size=letter
+ALLSPHINXOPTS   = -d $(BUILDDIR)/doctrees $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+# the i18n builder cannot share the environment and doctrees with the others
+I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
+
+.PHONY: help
 help:
-	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+	@echo "Please use \`make <target>' where <target> is one of"
+	@echo "  html       to make standalone HTML files"
+	@echo "  dirhtml    to make HTML files named index.html in directories"
+	@echo "  singlehtml to make a single large HTML file"
+	@echo "  pickle     to make pickle files"
+	@echo "  json       to make JSON files"
+	@echo "  htmlhelp   to make HTML files and a HTML help project"
+	@echo "  qthelp     to make HTML files and a qthelp project"
+	@echo "  applehelp  to make an Apple Help Book"
+	@echo "  devhelp    to make HTML files and a Devhelp project"
+	@echo "  epub       to make an epub"
+	@echo "  epub3      to make an epub3"
+	@echo "  latex      to make LaTeX files, you can set PAPER=a4 or PAPER=letter"
+	@echo "  latexpdf   to make LaTeX files and run them through pdflatex"
+	@echo "  latexpdfja to make LaTeX files and run them through platex/dvipdfmx"
+	@echo "  text       to make text files"
+	@echo "  man        to make manual pages"
+	@echo "  texinfo    to make Texinfo files"
+	@echo "  info       to make Texinfo files and run them through makeinfo"
+	@echo "  gettext    to make PO message catalogs"
+	@echo "  changes    to make an overview of all changed/added/deprecated items"
+	@echo "  xml        to make Docutils-native XML files"
+	@echo "  pseudoxml  to make pseudoxml-XML files for display purposes"
+	@echo "  linkcheck  to check all external links for integrity"
+	@echo "  doctest    to run all doctests embedded in the documentation (if enabled)"
+	@echo "  coverage   to run coverage check of the documentation (if enabled)"
+	@echo "  dummy      to check syntax errors of document sources"
 
-.PHONY: help Makefile.sphinx
+.PHONY: clean
+clean:
+	rm -rf $(BUILDDIR)
+
+.PHONY: html
+html:
+	$(SPHINXBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)/html
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/html."
 
 .PHONY: livehtml
 livehtml:
@@ -23,7 +63,172 @@ livehtml:
 	@echo
 	$(SPHINXAUTOBUILD) -b html $(ALLSPHINXOPTS) $(BUILDDIR)
 
-# Catch-all target: route all unknown targets to Sphinx using the new
-# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
-%: Makefile.sphinx
-	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+.PHONY: dirhtml
+dirhtml:
+	$(SPHINXBUILD) -b dirhtml $(ALLSPHINXOPTS) $(BUILDDIR)/dirhtml
+	@echo
+	@echo "Build finished. The HTML pages are in $(BUILDDIR)/dirhtml."
+
+.PHONY: singlehtml
+singlehtml:
+	$(SPHINXBUILD) -b singlehtml $(ALLSPHINXOPTS) $(BUILDDIR)/singlehtml
+	@echo
+	@echo "Build finished. The HTML page is in $(BUILDDIR)/singlehtml."
+
+.PHONY: pickle
+pickle:
+	$(SPHINXBUILD) -b pickle $(ALLSPHINXOPTS) $(BUILDDIR)/pickle
+	@echo
+	@echo "Build finished; now you can process the pickle files."
+
+.PHONY: json
+json:
+	$(SPHINXBUILD) -b json $(ALLSPHINXOPTS) $(BUILDDIR)/json
+	@echo
+	@echo "Build finished; now you can process the JSON files."
+
+.PHONY: htmlhelp
+htmlhelp:
+	$(SPHINXBUILD) -b htmlhelp $(ALLSPHINXOPTS) $(BUILDDIR)/htmlhelp
+	@echo
+	@echo "Build finished; now you can run HTML Help Workshop with the" \
+	      ".hhp project file in $(BUILDDIR)/htmlhelp."
+
+.PHONY: qthelp
+qthelp:
+	$(SPHINXBUILD) -b qthelp $(ALLSPHINXOPTS) $(BUILDDIR)/qthelp
+	@echo
+	@echo "Build finished; now you can run "qcollectiongenerator" with the" \
+	      ".qhcp project file in $(BUILDDIR)/qthelp, like this:"
+	@echo "# qcollectiongenerator $(BUILDDIR)/qthelp/coreboot.qhcp"
+	@echo "To view the help file:"
+	@echo "# assistant -collectionFile $(BUILDDIR)/qthelp/coreboot.qhc"
+
+.PHONY: applehelp
+applehelp:
+	$(SPHINXBUILD) -b applehelp $(ALLSPHINXOPTS) $(BUILDDIR)/applehelp
+	@echo
+	@echo "Build finished. The help book is in $(BUILDDIR)/applehelp."
+	@echo "N.B. You won't be able to view it unless you put it in" \
+	      "~/Library/Documentation/Help or install it in your application" \
+	      "bundle."
+
+.PHONY: devhelp
+devhelp:
+	$(SPHINXBUILD) -b devhelp $(ALLSPHINXOPTS) $(BUILDDIR)/devhelp
+	@echo
+	@echo "Build finished."
+	@echo "To view the help file:"
+	@echo "# mkdir -p $$HOME/.local/share/devhelp/coreboot"
+	@echo "# ln -s $(BUILDDIR)/devhelp $$HOME/.local/share/devhelp/coreboot"
+	@echo "# devhelp"
+
+.PHONY: epub
+epub:
+	$(SPHINXBUILD) -b epub $(ALLSPHINXOPTS) $(BUILDDIR)/epub
+	@echo
+	@echo "Build finished. The epub file is in $(BUILDDIR)/epub."
+
+.PHONY: epub3
+epub3:
+	$(SPHINXBUILD) -b epub3 $(ALLSPHINXOPTS) $(BUILDDIR)/epub3
+	@echo
+	@echo "Build finished. The epub3 file is in $(BUILDDIR)/epub3."
+
+.PHONY: latex
+latex:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo
+	@echo "Build finished; the LaTeX files are in $(BUILDDIR)/latex."
+	@echo "Run \`make' in that directory to run these through (pdf)latex" \
+	      "(use \`make latexpdf' here to do that automatically)."
+
+.PHONY: latexpdf
+latexpdf:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through pdflatex..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: latexpdfja
+latexpdfja:
+	$(SPHINXBUILD) -b latex $(ALLSPHINXOPTS) $(BUILDDIR)/latex
+	@echo "Running LaTeX files through platex and dvipdfmx..."
+	$(MAKE) -C $(BUILDDIR)/latex all-pdf-ja
+	@echo "pdflatex finished; the PDF files are in $(BUILDDIR)/latex."
+
+.PHONY: text
+text:
+	$(SPHINXBUILD) -b text $(ALLSPHINXOPTS) $(BUILDDIR)/text
+	@echo
+	@echo "Build finished. The text files are in $(BUILDDIR)/text."
+
+.PHONY: man
+man:
+	$(SPHINXBUILD) -b man $(ALLSPHINXOPTS) $(BUILDDIR)/man
+	@echo
+	@echo "Build finished. The manual pages are in $(BUILDDIR)/man."
+
+.PHONY: texinfo
+texinfo:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo
+	@echo "Build finished. The Texinfo files are in $(BUILDDIR)/texinfo."
+	@echo "Run \`make' in that directory to run these through makeinfo" \
+	      "(use \`make info' here to do that automatically)."
+
+.PHONY: info
+info:
+	$(SPHINXBUILD) -b texinfo $(ALLSPHINXOPTS) $(BUILDDIR)/texinfo
+	@echo "Running Texinfo files through makeinfo..."
+	make -C $(BUILDDIR)/texinfo info
+	@echo "makeinfo finished; the Info files are in $(BUILDDIR)/texinfo."
+
+.PHONY: gettext
+gettext:
+	$(SPHINXBUILD) -b gettext $(I18NSPHINXOPTS) $(BUILDDIR)/locale
+	@echo
+	@echo "Build finished. The message catalogs are in $(BUILDDIR)/locale."
+
+.PHONY: changes
+changes:
+	$(SPHINXBUILD) -b changes $(ALLSPHINXOPTS) $(BUILDDIR)/changes
+	@echo
+	@echo "The overview file is in $(BUILDDIR)/changes."
+
+.PHONY: linkcheck
+linkcheck:
+	$(SPHINXBUILD) -b linkcheck $(ALLSPHINXOPTS) $(BUILDDIR)/linkcheck
+	@echo
+	@echo "Link check complete; look for any errors in the above output " \
+	      "or in $(BUILDDIR)/linkcheck/output.txt."
+
+.PHONY: doctest
+doctest:
+	$(SPHINXBUILD) -b doctest $(ALLSPHINXOPTS) $(BUILDDIR)/doctest
+	@echo "Testing of doctests in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/doctest/output.txt."
+
+.PHONY: coverage
+coverage:
+	$(SPHINXBUILD) -b coverage $(ALLSPHINXOPTS) $(BUILDDIR)/coverage
+	@echo "Testing of coverage in the sources finished, look at the " \
+	      "results in $(BUILDDIR)/coverage/python.txt."
+
+.PHONY: xml
+xml:
+	$(SPHINXBUILD) -b xml $(ALLSPHINXOPTS) $(BUILDDIR)/xml
+	@echo
+	@echo "Build finished. The XML files are in $(BUILDDIR)/xml."
+
+.PHONY: pseudoxml
+pseudoxml:
+	$(SPHINXBUILD) -b pseudoxml $(ALLSPHINXOPTS) $(BUILDDIR)/pseudoxml
+	@echo
+	@echo "Build finished. The pseudo-XML files are in $(BUILDDIR)/pseudoxml."
+
+.PHONY: dummy
+dummy:
+	$(SPHINXBUILD) -b dummy $(ALLSPHINXOPTS) $(BUILDDIR)/dummy
+	@echo
+	@echo "Build finished. Dummy builder generates no files."

Documentation/acpi/index.md

@@ -5,34 +5,18 @@ backwards support for ACPI 1.0 and is only compatible to ACPI version 2.0 and
 upwards.
 
 
-```{toctree}
-:maxdepth: 1
-
-SSDT UID generation <uid.md>
-```
+- [SSDT UID generation](uid.md)
 
 ## GPIO
 
-```{toctree}
-:maxdepth: 1
-
-GPIO toggling in ACPI AML <gpio.md>
-```
+- [GPIO toggling in ACPI AML](gpio.md)
 
 ## Windows-specific ACPI documentation
 
-```{toctree}
-:maxdepth: 1
-
-Windows-specific documentation <windows.md>
-```
+- [Windows-specific documentation](windows.md)
 
 ##  ACPI specification - Useful links
 
-```{toctree}
-:maxdepth: 1
-
-ACPI Specification 6.5 <https://uefi.org/specs/ACPI/6.5/index.html>
-ASL 2.0 Syntax <https://uefi.org/specs/ACPI/6.5/19_ASL_Reference.html#asl-2-0-symbolic-operators-and-expressions>
-Predefined ACPI Names <https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#predefined-acpi-names>
-```
+- [ACPI Specification 6.5](https://uefi.org/specs/ACPI/6.5/index.html)
+- [ASL 2.0 Syntax](https://uefi.org/specs/ACPI/6.5/19_ASL_Reference.html#asl-2-0-symbolic-operators-and-expressions)
+- [Predefined ACPI Names](https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#predefined-acpi-names)

Documentation/acronyms.md

@@ -1141,8 +1141,4 @@ Spec](https://uefi.org/specifications) for details, or run the tool
 
 
 ## References:
-```{toctree}
-:maxdepth: 1
-
-AMD Glossary of terms <https://www.amd.com/system/files/documents/glossary-of-terms-20220505-for-web.pdf>
-```
+* [AMD Glossary of terms](https://www.amd.com/system/files/documents/glossary-of-terms-20220505-for-web.pdf)

Documentation/arch/index.md

@@ -5,15 +5,7 @@ architectures.
 
 ## RISC-V
 
-```{toctree}
-:maxdepth: 1
-
-RISC-V documentation <riscv/index.md>
-```
+- [RISC-V documentation](riscv/index.md)
 
 ## x86
-```{toctree}
-:maxdepth: 1
-
-x86 documentation <x86/index.md>
-```
+- [x86 documentation](x86/index.md)

Documentation/arch/x86/index.md

@@ -2,14 +2,12 @@
 
 This section contains documentation about coreboot on x86 architecture.
 
-```{toctree}
-:maxdepth: 1
-
-x86 PAE support <pae.md>
-```
+* [x86 PAE support](pae.md)
 
 ## State of x86_64 support
-Some SOCs now support 64bit mode. Search for HAVE_X86_64_SUPPORT in Kconfig.
+At the moment there's only experimental x86_64 support.
+The `emulation/qemu-i440fx` and `emulation/qemu-q35` boards do support
+*ARCH_RAMSTAGE_X86_64* , *ARCH_POSTCAR_X86_64* and *ARCH_ROMSTAGE_X86_64*.
 
 In order to add support for x86_64 the following assumptions were made:
 * The CPU supports long mode
@@ -17,6 +15,7 @@ In order to add support for x86_64 the following assumptions were made:
 * All code that is to be run must be below 4GiB in physical memory
 * The high dword of pointers is always zero
 * The reference implementation is qemu
+* The CPU supports 1GiB hugepages
 * x86 payloads are loaded below 4GiB in physical memory and are jumped
   to in *protected mode*
 
@@ -44,12 +43,8 @@ Basic support for x86_64 has been implemented for QEMU mainboard target.
 
 ## Reference implementation
 The reference implementation is
-```{toctree}
-:maxdepth: 1
-
-QEMU i440fx <../../mainboard/emulation/qemu-i440fx.md>
-QEMU Q35 <../../mainboard/emulation/qemu-q35.md>
-```
+* [QEMU i440fx](../../mainboard/emulation/qemu-i440fx.md)
+* [QEMU Q35](../../mainboard/emulation/qemu-q35.md)
 
 ## TODO
 * Identity map memory above 4GiB in ramstage
@@ -59,6 +54,7 @@ QEMU Q35 <../../mainboard/emulation/qemu-q35.md>
 1. Fine grained page tables for SMM:
    * Must not have execute and write permissions for the same page.
    * Must allow only that TSEG pages can be marked executable
+   * Must reside in SMRAM
 2. Support 64bit PCI BARs above 4GiB
 3. Place and run code above 4GiB
 
@@ -66,10 +62,13 @@ QEMU Q35 <../../mainboard/emulation/qemu-q35.md>
 * Fix compilation errors
 * Test how well CAR works with x86_64 and paging
 * Improve mode switches
+* Test libgfxinit / VGA Option ROMs / FSP
 
-## Known problems on real hardware
+## Known bugs on real hardware
 
-Running VGA rom directly fails. Yabel works fine though.
+According to Intel x86_64 mode hasn't been validated in CAR environments.
+Until now it could be verified on various Intel platforms and no issues have
+been found.
 
 ## Known bugs on KVM enabled qemu
 

Documentation/community/index.md

@@ -1,10 +1,6 @@
 # Community
 
-```{toctree}
-:maxdepth: 1
-
-Code of Conduct <code_of_conduct.md>
-Language style <language_style.md>
-Community forums <forums.md>
-coreboot at conferences <conferences.md>
-```
+* [Code of Conduct](code_of_conduct.md)
+* [Language style](language_style.md)
+* [Community forums](forums.md)
+* [coreboot at conferences](conferences.md)

Documentation/conf.py

@@ -1,34 +1,46 @@
-# Configuration file for the Sphinx documentation builder.
-#
-# For the full list of built-in configuration values, see the documentation:
-# https://www.sphinx-doc.org/en/master/usage/configuration.html
-
-# -- Project information -----------------------------------------------------
-# https://www.sphinx-doc.org/en/master/usage/configuration.html#project-information
-
+# -*- coding: utf-8 -*-
 import subprocess
+from recommonmark.parser import CommonMarkParser
+import sphinx
 
-project = 'coreboot'
-copyright = 'CC-by 4.0 the coreboot project'
-author = 'the coreboot project'
+# Get Sphinx version
+major = 0
+minor = 0
+patchlevel = 0
+version = sphinx.__version__.split(".")
+if len(version) > 1:
+	major = int(version[0])
+	minor = int(version[1])
+	if len(version) > 2:
+		patchlevel = int(version[2])
 
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+source_suffix = ['.md']
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'coreboot'
+copyright = u'CC-by 4.0 the coreboot project'
+author = u'the coreboot project'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The full version, including alpha/beta/rc tags.
 release = subprocess.check_output(('git', 'describe')).decode("utf-8")
 # The short X.Y version.
 version = release.split("-")[0]
 
-
-# -- General configuration ---------------------------------------------------
-# https://www.sphinx-doc.org/en/master/usage/configuration.html#general-configuration
-
-extensions = ["myst_parser"]
-
-myst_heading_anchors = 5
-
-templates_path = ['_templates']
-exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
-
-# The name of the Pygments (syntax highlighting) style to use.
-pygments_style = 'sphinx'
+extensions = []
+# Load recommonmark, supported since 1.8+
+if major >= 2 or (major == 1 and minor >= 8):
+    extensions += ['recommonmark']
 
 # Try to load DITAA
 try:
@@ -45,11 +57,62 @@ else:
 # Usually you set "language" from the command line for these cases.
 language = 'en'
 
-# -- Options for HTML output -------------------------------------------------
-# https://www.sphinx-doc.org/en/master/usage/configuration.html#options-for-html-output
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store']
 
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# A list of ignored prefixes for module index sorting.
+# modindex_common_prefix = []
+
+# If true, keep warnings as "system message" paragraphs in the built documents.
+# keep_warnings = False
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
 html_theme = 'sphinx_rtd_theme'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
 html_static_path = ['_static']
+
 html_css_files = [
     'theme_overrides.css',  # override wide tables in RTD theme
 ]
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'corebootdoc'
+
+enable_auto_toc_tree = True
+
+class MyCommonMarkParser(CommonMarkParser):
+    # remove this hack once upstream RecommonMark supports inline code
+    def visit_code(self, mdnode):
+        from docutils import nodes
+        n = nodes.literal(mdnode.literal, mdnode.literal)
+        self.current_node.append(n)
+
+def setup(app):
+    from recommonmark.transform import AutoStructify
+    # Load recommonmark on old Sphinx
+    if major == 1 and minor < 8:
+        app.add_source_parser('.md', MyCommonMarkParser)
+
+    app.add_config_value('recommonmark_config', {
+        'enable_auto_toc_tree': True,
+        'enable_auto_doc_ref': False, # broken in Sphinx 1.6+
+        'enable_eval_rst': True,
+        'url_resolver': lambda url: '/' + url
+    }, True)
+    app.add_transform(AutoStructify)

Documentation/contributing/gerrit_guidelines.md

@@ -395,8 +395,8 @@ Gerrit user roles
 There are a few relevant roles a user can have on Gerrit:
 
 - The anonymous user can check out source code.
-- A registered user can also comment and give "+1" code reviews.
-- A reviewer can give "-1" and "+2" code reviews.
+- A registered user can also comment and give "+1" and "-1" code reviews.
+- A reviewer can also give "+2" code reviews.
 - A core developer can also give "-2" (that is, blocking) code reviews
   and submit changes.
 

Documentation/contributing/index.md

@@ -1,11 +1,7 @@
 # Contributing
 
-```{toctree}
-:maxdepth: 1
-
-Coding Style <coding_style.md>
-Gerrit Guidelines <gerrit_guidelines.md>
-Project Ideas <project_ideas.md>
-Documentation Ideas <documentation_ideas.md>
-Google Summer of Code <gsoc.md>
-```
+* [Coding Style](coding_style.md)
+* [Gerrit Guidelines](gerrit_guidelines.md)
+* [Project Ideas](project_ideas.md)
+* [Documentation Ideas](documentation_ideas.md)
+* [Google Summer of Code](gsoc.md)

Documentation/distributions.md

@@ -29,7 +29,7 @@ sealings are sent via encrypted email.
 
 ### NovaCustom laptops
 
-[NovaCustom](https://novacustom.com) sells configurable laptops with
+[NovaCustom](https://configurelaptop.eu/) sells configurable laptops with
 [Dasharo](https://dasharo.com/) coreboot based firmware on board, maintained by
 [3mdeb](https://3mdeb.com/). NovaCustom offers full GNU/Linux and Microsoft
 Windows compatibility. NovaCustom ensures security updates via fwupd for 5 years

Documentation/drivers/index.md

@@ -8,14 +8,10 @@ For details on how to connect device drivers to a mainboard, see [Driver Devicet
 
 Some of the drivers currently available include:
 
-```{toctree}
-:maxdepth: 1
-
-Intel DPTF <dptf.md>
-IPMI KCS <ipmi_kcs.md>
-SMMSTORE <smmstore.md>
-SMMSTOREv2 <smmstorev2.md>
-SoundWire <soundwire.md>
-USB4 Retimer <retimer.md>
-CBFS SMBIOS hooks <cbfs_smbios.md>
-```
+* [Intel DPTF](dptf.md)
+* [IPMI KCS](ipmi_kcs.md)
+* [SMMSTORE](smmstore.md)
+* [SMMSTOREv2](smmstorev2.md)
+* [SoundWire](soundwire.md)
+* [USB4 Retimer](retimer.md)
+* [CBFS SMBIOS hooks](cbfs_smbios.md)

Documentation/drivers/smmstore.md

@@ -128,11 +128,7 @@ data or modify the currently running kernel.*
 
 ## External links
 
-```{toctree}
-:maxdepth: 1
-
-A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI <https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf>
-```
+* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
 Note, this differs significantly from coreboot's implementation.
 
 [SMM]: ../security/smm.md

Documentation/drivers/smmstorev2.md

@@ -124,9 +124,25 @@ additional calling arguments are passed via `%ebx`.
 **NOTE**: The size of the struct entries are in the native word size of
 smihandler. This means 32 bits in almost all cases.
 
-#### - SMMSTORE_CMD_INIT_DEPRECATED = 4
+#### - SMMSTORE_CMD_INIT = 4
 
-Unused, returns SMMSTORE_REG_UNSUPPORTED.
+This installs the communication buffer to use and thus enables the
+SMMSTORE handler. This command can only be executed once and is done
+by the firmware. Calling this function at runtime has no effect.
+
+The additional parameter buffer `%ebx` contains a pointer to the
+following struct:
+
+```C
+struct smmstore_params_init {
+	uint32_t com_buffer;
+	uint32_t com_buffer_size;
+} __packed;
+```
+
+INPUT:
+- `com_buffer`: Physical address of the communication buffer (CBMEM)
+- `com_buffer_size`: Size in bytes of the communication buffer
 
 #### - SMMSTORE_CMD_RAW_READ = 5
 
@@ -199,11 +215,7 @@ running kernel.
 
 ## External links
 
-```{toctree}
-:maxdepth: 1
-
-A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI <https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf>
-```
+* [A Tour Beyond BIOS Implementing UEFI Authenticated Variables in SMM with EDKI](https://software.intel.com/sites/default/files/managed/cf/ea/a_tour_beyond_bios_implementing_uefi_authenticated_variables_in_smm_with_edkii.pdf)
 Note that this differs significantly from coreboot's implementation.
 
 [SMM]: ../security/smm.md

Documentation/external_docs.md

@@ -17,21 +17,13 @@ Please add any helpful or informational links and sections as you see fit.
   * [Part 1: PCI-based systems](https://resources.infosecinstitute.com/topic/system-address-map-initialization-in-x86x64-architecture-part-1-pci-based-systems/)
   * [Part 2: PCI express-based systems](https://resources.infosecinstitute.com/topic/system-address-map-initialization-x86x64-architecture-part-2-pci-express-based-systems/)
   * [PCIe elastic buffer](https://www.mindshare.com/files/resources/mindshare_pcie_elastic_buffer.pdf)
-```{toctree}
-:maxdepth: 1
-
-Boot Guard and PSB have user-hostile defaults <https://mjg59.dreamwidth.org/58424.html>
-```
+* [Boot Guard and PSB have user-hostile defaults](https://mjg59.dreamwidth.org/58424.html)
 
 
 ## General Information
 
-```{toctree}
-:maxdepth: 1
-
-OS Dev <https://wiki.osdev.org/Categorized_Main_Page>
-Interface BUS <http://www.interfacebus.com/>
-```
+* [OS Dev](https://wiki.osdev.org/Categorized_Main_Page)
+* [Interface BUS](http://www.interfacebus.com/)
 
 ## OpenSecurityTraining2
 
@@ -51,14 +43,10 @@ modified works back to the community.
 Below is a list of currently available courses that can help understand the
 inner workings of coreboot and other firmware-related topics:
 
-```{toctree}
-:maxdepth: 1
-
-coreboot design principles and boot process <https://ost2.fyi/Arch4031>
-x86-64 Assembly <https://ost2.fyi/Arch1001>
-x86-64 OS Internals <https://ost2.fyi/Arch2001>
-x86-64 Intel Firmware Attack & Defense <https://ost2.fyi/Arch4001>
-```
+* [coreboot design principles and boot process](https://ost2.fyi/Arch4031)
+* [x86-64 Assembly](https://ost2.fyi/Arch1001)
+* [x86-64 OS Internals](https://ost2.fyi/Arch2001)
+* [x86-64 Intel Firmware Attack & Defense](https://ost2.fyi/Arch4001)
 
 There are [additional security courses](https://p.ost2.fyi/courses) at the site
 as well (such as
@@ -66,79 +54,47 @@ as well (such as
 
 ## Firmware Specifications & Information
 
-```{toctree}
-:maxdepth: 1
-
-System Management BIOS - SMBIOS <https://www.dmtf.org/standards/smbios>
-Desktop and Mobile Architecture for System Hardware - DASH <https://www.dmtf.org/standards/dash>
-PNP BIOS <https://www.intel.com/content/dam/support/us/en/documents/motherboards/desktop/sb/pnpbiosspecificationv10a.pdf>
-```
+* [System Management BIOS - SMBIOS](https://www.dmtf.org/standards/smbios)
+* [Desktop and Mobile Architecture for System Hardware - DASH](https://www.dmtf.org/standards/dash)
+* [PNP BIOS](https://www.intel.com/content/dam/support/us/en/documents/motherboards/desktop/sb/pnpbiosspecificationv10a.pdf)
 
 
 ### ACPI
 
-```{toctree}
-:maxdepth: 1
-
-ACPI Specs <https://uefi.org/acpi/specs>
-ACPI in Linux <https://www.kernel.org/doc/ols/2005/ols2005v1-pages-59-76.pdf>
-ACPI 5 Linux <https://blog.linuxplumbersconf.org/2012/wp-content/uploads/2012/09/LPC2012-ACPI5.pdf>
-ACPI 6 Linux <https://events.static.linuxfound.org/sites/events/files/slides/ACPI_6_and_Linux_0.pdf>
-```
+* [ACPI Specs](https://uefi.org/acpi/specs)
+* [ACPI in Linux](https://www.kernel.org/doc/ols/2005/ols2005v1-pages-59-76.pdf)
+* [ACPI 5 Linux](https://blog.linuxplumbersconf.org/2012/wp-content/uploads/2012/09/LPC2012-ACPI5.pdf)
+* [ACPI 6 Linux](https://events.static.linuxfound.org/sites/events/files/slides/ACPI_6_and_Linux_0.pdf)
 
 
 ### Security
 
-```{toctree}
-:maxdepth: 1
-
-Intel Boot Guard <https://edk2-docs.gitbook.io/understanding-the-uefi-secure-boot-chain/secure_boot_chain_in_uefi/intel_boot_guard>
-```
+* [Intel Boot Guard](https://edk2-docs.gitbook.io/understanding-the-uefi-secure-boot-chain/secure_boot_chain_in_uefi/intel_boot_guard)
 
 
 ## Hardware information
 
-```{toctree}
-:maxdepth: 1
-
-WikiChip <https://en.wikichip.org/wiki/WikiChip>
-Sandpile <https://www.sandpile.org/>
-CPU-World <https://www.cpu-world.com/index.html>
-CPU-Upgrade <https://www.cpu-upgrade.com/index.html>
-```
+* [WikiChip](https://en.wikichip.org/wiki/WikiChip)
+* [Sandpile](https://www.sandpile.org/)
+* [CPU-World](https://www.cpu-world.com/index.html)
+* [CPU-Upgrade](https://www.cpu-upgrade.com/index.html)
 
 
 ### Hardware Specifications & Standards
 
 * [Bluetooth](https://www.bluetooth.com/specifications/specs/) - Bluetooth SIG
-```{toctree}
-:maxdepth: 1
-
-eMMC <https://www.jedec.org/)  - JEDEC - (LOGIN REQUIRED>
-```
+* [eMMC](https://www.jedec.org/)  - JEDEC - (LOGIN REQUIRED)
 * [eSPI](https://cdrdv2.intel.com/v1/dl/getContent/645987) - Intel
 * [I2c Spec](https://web.archive.org/web/20170704151406/https://www.nxp.com/docs/en/user-guide/UM10204.pdf),
   [Appnote](https://www.nxp.com/docs/en/application-note/AN10216.pdf) - NXP
 * [I2S](https://www.nxp.com/docs/en/user-manual/UM11732.pdf) - NXP
-```{toctree}
-:maxdepth: 1
-
-I3C <https://www.mipi.org/specifications/i3c-sensor-specification) - MIPI Alliance (LOGIN REQUIRED>
-Memory <https://www.jedec.org/)  - JEDEC - (LOGIN REQUIRED>
-```
+* [I3C](https://www.mipi.org/specifications/i3c-sensor-specification) - MIPI Alliance (LOGIN REQUIRED)
+* [Memory](https://www.jedec.org/)  - JEDEC - (LOGIN REQUIRED)
 * [NVMe](https://nvmexpress.org/developers/) - NVMe Specifications
 * [LPC](https://www.intel.com/content/dam/www/program/design/us/en/documents/low-pin-count-interface-specification.pdf) - Intel
-```{toctree}
-:maxdepth: 1
-
-PCI / PCIe / M.2 <https://pcisig.com/specifications) -  PCI-SIG - (LOGIN REQUIRED>
-```
+* [PCI / PCIe / M.2](https://pcisig.com/specifications) -  PCI-SIG - (LOGIN REQUIRED)
 * [Power Delivery](https://www.usb.org/documents) - USB Implementers Forum
-```{toctree}
-:maxdepth: 1
-
-SATA <https://sata-io.org/developers/purchase-specification) - SATA-IO (LOGIN REQUIRED>
-```
+* [SATA](https://sata-io.org/developers/purchase-specification) - SATA-IO (LOGIN REQUIRED)
 * [SMBus](http://www.smbus.org/specs/) - System Management Interface Forum
 * [Smart Battery](http://smartbattery.org/specs/) - Smart Battery System Implementers Forum
 * [USB](https://www.usb.org/documents) - USB Implementers Forum
@@ -177,9 +133,5 @@ SATA <https://sata-io.org/developers/purchase-specification) - SATA-IO (LOGIN RE
 
 ## Infrastructure software
 
-```{toctree}
-:maxdepth: 1
-
-Kconfig <https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html>
-GNU Make <https://www.gnu.org/software/make/manual/>
-```
+* [Kconfig](https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html)
+* [GNU Make](https://www.gnu.org/software/make/manual/)

Documentation/getting_started/build_system.md

@@ -75,7 +75,7 @@ $(call add_intermediate, add_mrc_data)
 
 Note that the second line must start with a tab, not spaces.
 
-```{eval-rst}
+```eval_rst
 See also :doc:`../tutorial/managing_local_additions`.
 ```
 

Documentation/getting_started/faq.md

@@ -84,8 +84,8 @@ the operating system.
 
 * U-boot, depthcharge, FILO, etc.
 
-There’s [https://doc.coreboot.org/payloads.html](https://doc.coreboot.org/payloads.html)
-with a list, although it’s not complete.
+There’s [https://doc.coreboot.org/payloads.html](https://doc.coreboot.org/payloads.
+html) with a list, although it’s not complete.
 
 
 ### What does coreboot leave in memory after it's done initializing the hardware?

Documentation/getting_started/gpio.md

@@ -167,7 +167,7 @@ could cause catastrophic failures, up to and including your mainboard!
 As per Intel Platform Controller Hub (PCH) EDS since Skylake, a GPIO PAD register
 supports four different types of GPIO reset as:
 
-```{eval-rst}
+```eval_rst
 +------------------------+----------------+-------------+-------------+
 |                        |                |         PAD Reset ?       |
 + PAD Reset Config       + Platform Reset +-------------+-------------+

Documentation/getting_started/index.md

@@ -1,14 +1,10 @@
 # Getting Started
 
-```{toctree}
-:maxdepth: 1
-
-coreboot architecture <architecture.md>
-Build System <build_system.md>
-Submodules <submodules.md>
-Kconfig <kconfig.md>
-Writing Documentation <writing_documentation.md>
-Setting up GPIOs <gpio.md>
-Adding devices to a device tree <devicetree.md>
-Frequently Asked Questions <faq.md>
-```
+* [coreboot architecture](architecture.md)
+* [Build System](build_system.md)
+* [Submodules](submodules.md)
+* [Kconfig](kconfig.md)
+* [Writing Documentation](writing_documentation.md)
+* [Setting up GPIOs](gpio.md)
+* [Adding devices to a device tree](devicetree.md)
+* [Frequently Asked Questions](faq.md)

Documentation/getting_started/kconfig.md

@@ -11,12 +11,8 @@ configuration front end in coreboot today.
 
 The official Kconfig source and documentation is kept at kernel.org:
 
-```{toctree}
-:maxdepth: 1
-
-Kconfig source <https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/scripts/kconfig>
-Kconfig Language Documentation <https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt>
-```
+- [Kconfig source](https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/scripts/kconfig)
+- [Kconfig Language Documentation](https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt)
 
 The advantage to using Kconfig is that it allows users to easily select the
 high level features of the project to be enabled or disabled at build time.
@@ -200,9 +196,9 @@ values to be set based on other values.
   visible in the front end.
 
 
-### Keywords
+## Keywords
 
-#### bool
+### bool
 
 The 'bool' keyword assigns a boolean type to a symbol. The allowable values for
 a boolean type are 'n' or 'y'. The keyword can be followed by an optional prompt
@@ -238,7 +234,7 @@ bool \[prompt\] \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### choice
+### choice
 
 This creates a selection list of one or more boolean symbols. For bools, only
 one of the symbols can be selected, and one will be be forced to be selected,
@@ -301,7 +297,7 @@ choice \[symbol\]
 
 --------------------------------------------------------------------------------
 
-#### comment
+### comment
 
 This keyword defines a line of text that is displayed to the user in the
 configuration frontend and is additionally written to the output files.
@@ -326,7 +322,7 @@ comment &lt;prompt&gt;
 
 --------------------------------------------------------------------------------
 
-#### config
+### config
 
 This is the keyword that starts a block defining a Kconfig symbol. The symbol
 modifiers follow the 'config' statement.
@@ -363,7 +359,7 @@ config &lt;symbol&gt;
 
 --------------------------------------------------------------------------------
 
-#### default
+### default
 
 The ‘default’ keyword assigns a value to a symbol in the case where no preset
 value exists, i.e. the symbol is not present and assigned in .config.  If there
@@ -403,7 +399,7 @@ default &lt;expr&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### def_bool
+### def_bool
 
 ‘def_bool’ is similar to the 'bool' keyword in that it sets a symbol’s type to
 boolean. It lets you set the type and default value at the same time, instead
@@ -437,7 +433,7 @@ def_bool &lt;expr&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### depends on
+### depends on
 
 This defines a dependency for a menu entry, including symbols and comments.  It
 behaves the same as surrounding the menu entry with an if/endif block.  If the
@@ -466,28 +462,28 @@ depends on &lt;expr&gt;
 
 --------------------------------------------------------------------------------
 
-#### endchoice
+### endchoice
 
 This ends a choice block. See the 'choice' keyword for more information and an
 example.
 
 --------------------------------------------------------------------------------
 
-#### endif
+### endif
 
 This ends a block started by the 'if' keyword. See the 'if' keyword for more
 information and an example.
 
 --------------------------------------------------------------------------------
 
-#### endmenu
+### endmenu
 
 This ends a menu block. See the 'menu' keyword for more information and an
 example.
 
 --------------------------------------------------------------------------------
 
-#### help
+### help
 
 The 'help' keyword defines the subsequent block of text as help for a config or
 choice block. The help block is started by the 'help' keyword on a line by
@@ -519,7 +515,7 @@ help &lt;help text&gt;
 
 --------------------------------------------------------------------------------
 
-#### hex
+### hex
 
 This is another symbol type specifier, specifying an unsigned integer value
 formatted as hexadecimal.
@@ -555,7 +551,7 @@ hex &lt;expr&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### if
+### if
 
 The 'if' keyword is overloaded, used in two different ways. The first definition
 enables and disables various other keywords, and follows the other keyword
@@ -596,7 +592,7 @@ endif
 
 --------------------------------------------------------------------------------
 
-#### int
+### int
 
 A type setting keyword, defines a symbol as an integer, accepting only signed
 numeric values.  The values can be further restricted with the ‘range’ keyword.
@@ -632,7 +628,7 @@ int &lt;expr&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### mainmenu
+### mainmenu
 
 The 'mainmenu' keyword sets the title or title bar of the configuration front
   end, depending on how the configuration program decides to use it. It can only
@@ -652,7 +648,7 @@ mainmenu "coreboot configuration"
 
 --------------------------------------------------------------------------------
 
-#### menu
+### menu
 
 The 'menu' and 'endmenu' keywords tell the configuration front end that the
 enclosed statements are part of a group of related pieces.
@@ -699,7 +695,7 @@ endmenu
 
 --------------------------------------------------------------------------------
 
-#### prompt
+### prompt
 
 The 'prompt' keyword sets the text displayed for a config symbol or choice in
 configuration front end.
@@ -752,7 +748,7 @@ prompt &lt;prompt&gt; \[if &lt;expr&gt;\]
             prompt "Prompt value 2"
 --------------------------------------------------------------------------------
 
-#### range
+### range
 
 This sets the allowable minimum and maximum entries for hex or int type config
 symbols.
@@ -774,7 +770,7 @@ range &lt;symbol&gt; &lt;symbol&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### select
+### select
 
 The ‘select’ keyword is used within a bool type config block.  In coreboot (and
 other projects that don't use modules), the 'select' keyword can force an
@@ -818,7 +814,7 @@ select &lt;symbol&gt; \[if &lt;expr&gt;\]
 
 --------------------------------------------------------------------------------
 
-#### source
+### source
 
 The 'source' keyword functions much the same as an 'include' statement in c.
 This pulls one or more files into Kconfig at the location of the 'source'
@@ -877,7 +873,7 @@ statements that generate a list of all the platform names:
 
 --------------------------------------------------------------------------------
 
-#### string
+### string
 
 The last of the symbol type assignment keywords. 'string' allows a text value to
 be entered.
@@ -923,7 +919,7 @@ keyword later. See the prompt keyword for more notes.
 
 
 
-### Keywords not used in coreboot at the time of writing:
+## Keywords not used in coreboot at the time of writing:
 
 - allnoconfig_y:
 - defconfig_list
@@ -948,7 +944,7 @@ statements:
     #define SYMBOL NAME XXX
 
 
-#### Symbol types:
+##### Symbol types:
 - bool, int, and hex types -  Every symbol of one of these types created in the
   Kconfig tree is defined.  It doesn’t matter whether they’re in an if/endif
   block, or have a ‘depends on’ statement - they ALL end up being defined in
@@ -1168,19 +1164,19 @@ saved .config file. As always, a 'select' statement overrides any specified
 
 ## Kconfig Editor Highlighting
 
-### vim:
+#### vim:
 
 vim has syntax highlighting for Kconfig built in (or at least as a part of
 vim-common), but most editors do not.
 
 
-### ultraedit:
+#### ultraedit:
 
 https://github.com/martinlroth/wordfiles/blob/master/kconfig.uew
 
 
 
-### atom:
+#### atom:
 
 https://github.com/martinlroth/language-kconfig
 

Documentation/getting_started/writing_documentation.md

@@ -99,7 +99,7 @@ To reference documents use the TOC tree or inline RST code.
 Under Sphinx markdown tables are not supported. Therefore you can use following
 code block to write tables in reStructuredText and embed them into the markdown:
 
-    ```{eval-rst}
+    ```eval_rst
     +------------+------------+-----------+
     | Header 1   | Header 2   | Header 3  |
     +============+============+===========+
@@ -144,7 +144,7 @@ you'll see the following warning:
 You can import CSV files and let sphinx automatically convert them to human
 readable tables, using the following reStructuredText snipped:
 
-    ```{eval-rst}
+    ```eval_rst
     .. csv-table::
        :header: "Key", "Value"
        :file: keyvalues.csv

Documentation/gfx/display-panel.md

@@ -22,7 +22,7 @@ the power sequence timing parameters, which are usually named T[N] and also
 referenced in Intel's respective registers listing. You need the values for
 `PP_ON_DELAYS`, `PP_OFF_DELAYS` and `PP_DIVISOR` for your `devicetree.cb`:
 
-```{eval-rst}
+```eval_rst
 +-----------------------------+---------------------------------------+-----+
 | Intel docs                  | devicetree.cb                         | eDP |
 +-----------------------------+---------------------------------------+-----+

Documentation/index.md

@@ -139,45 +139,6 @@ Every now and then, coreboot is present in one way or another at
 [conferences](community/conferences.md). If you're around, come and
 say hello!
 
-## Blob policy in the coreboot project
-
-The goal of the coreboot project is to provide a FOSS firmware solution across
-multiple CPU architectures, such as ARM, x86, and RISC-V. While fully open
-source implementations for these architectures are encouraged and preferred,
-we understand that a fully open implementation whereby every firmware component
-is available as source code for modern platforms is not always feasible.
-Different reasons inhibit the availability of fully open implementations,
-including limited development resources, 3rd party license constraints of
-IP blocks, or a legacy mindset of the silicon vendors.
-
-It is important for the coreboot project to have support for modern CPU
-platforms in order to provide a viable alternative for proprietary firmware
-implementations. We do not have direct control over how hardware vendors design
-their products, however we can provide an attractive alternative to the
-expensive and complicated proprietary firmware model that exists today.
-For modern platforms, we are largely dependent on the silicon
-vendor to provide additional information on how to properly initialize the
-hardware, as the required datasheets are often only available with an NDA.
-Therefore, one possible way to have coreboot support for the latest platforms
-is binary code (aka, a blob) provided by the silicon vendor. While we do
-discourage this solution, it can be a door opener for coreboot’s support of a
-given platform and thus keep coreboot functional on modern platforms. It is
-clearly not the goal of the project to accept every blob a silicon vendor wishes
-to use without question. On the contrary, each new blob needs to be examined
-critically by the community, evaluating the need, risk, and alternative options.
-
-Wherever possible, introducing new blobs should be avoided. That said, there
-can be situations where a piece of code provided as a blob will enable the rest
-of the fully open source firmware stack on a brand new platform. If blocking
-this blob would lead to no support at all for the platform in question in
-coreboot, this situation needs to be examined carefully. While these kinds
-of discussion will be coordinated closely with the community (e.g. on the
-mailing list or dedicated meetings), ultimately it is up to the leadership to
-decide if there is no agreement between the community and the vendor pushing for
-the new blob. This decision will be communicated on the mailing list.
-Please see additionally
-[coreboot binary policy](https://github.com/coreboot/blobs/blob/master/README.md).
-
 ## Getting the source code
 
 coreboot is primarily developed in the
@@ -209,38 +170,34 @@ for example OpenBSD, is probably the closest cousin of our approach.
 
 Contents:
 
-```{toctree}
-:maxdepth: 1
-
-Getting Started <getting_started/index.md>
-Tutorial <tutorial/index.md>
-Contributing <contributing/index.md>
-Community <community/index.md>
-Payloads <payloads.md>
-Distributions <distributions.md>
-Technotes <technotes/index.md>
-ACPI <acpi/index.md>
-Native Graphics Initialization with libgfxinit <gfx/libgfxinit.md>
-Display panel <gfx/display-panel.md>
-CPU Architecture <arch/index.md>
-Platform independent drivers <drivers/index.md>
-Northbridge <northbridge/index.md>
-System on Chip <soc/index.md>
-Mainboard <mainboard/index.md>
-Payloads <lib/payloads/index.md>
-Libraries <lib/index.md>
-Options <lib/option.md>
-Security <security/index.md>
-SuperIO <superio/index.md>
-Vendorcode <vendorcode/index.md>
-Utilities <util.md>
-Software Bill of Materials <sbom/sbom.md>
-Project infrastructure & services <infrastructure/index.md>
-Boards supported in each release directory <releases/boards_supported_on_branches.md>
-Release notes <releases/index.md>
-Acronyms & Definitions <acronyms.md>
-External Resources <external_docs.md>
-Documentation License <documentation_license.md>
-```
+* [Getting Started](getting_started/index.md)
+* [Tutorial](tutorial/index.md)
+* [Contributing](contributing/index.md)
+* [Community](community/index.md)
+* [Payloads](payloads.md)
+* [Distributions](distributions.md)
+* [Technotes](technotes/index.md)
+* [ACPI](acpi/index.md)
+* [Native Graphics Initialization with libgfxinit](gfx/libgfxinit.md)
+* [Display panel](gfx/display-panel.md)
+* [CPU Architecture](arch/index.md)
+* [Platform independent drivers](drivers/index.md)
+* [Northbridge](northbridge/index.md)
+* [System on Chip](soc/index.md)
+* [Mainboard](mainboard/index.md)
+* [Payloads](lib/payloads/index.md)
+* [Libraries](lib/index.md)
+* [Options](lib/option.md)
+* [Security](security/index.md)
+* [SuperIO](superio/index.md)
+* [Vendorcode](vendorcode/index.md)
+* [Utilities](util.md)
+* [Software Bill of Materials](sbom/sbom.md)
+* [Project infrastructure & services](infrastructure/index.md)
+* [Boards supported in each release directory](releases/boards_supported_on_branches.md)
+* [Release notes](releases/index.md)
+* [Acronyms & Definitions](acronyms.md)
+* [External Resources](external_docs.md)
+* [Documentation License](documentation_license.md)
 
 [Documentation]: https://review.coreboot.org/plugins/gitiles/coreboot/+/refs/heads/main/Documentation/

Documentation/infrastructure/builders.md

@@ -93,19 +93,11 @@ You can see all the builds in the main jenkins interface:
 Most of the time on the builders is taken up by the coreboot main and
 coreboot gerrit builds.
 
-```{toctree}
-:maxdepth: 1
-
-coreboot gerrit build <https://qa.coreboot.org/job/coreboot-gerrit/>
-```
+* [coreboot gerrit build](https://qa.coreboot.org/job/coreboot-gerrit/)
 ([Time trend](https://qa.coreboot.org/job/coreboot-gerrit/buildTimeTrend))
 
 
-```{toctree}
-:maxdepth: 1
-
-coreboot main build <https://qa.coreboot.org/job/coreboot/>
-```
+* [coreboot main build](https://qa.coreboot.org/job/coreboot/)
  ([Time trend](https://qa.coreboot.org/job/coreboot/buildTimeTrend))
 
 

Documentation/infrastructure/index.md

@@ -4,17 +4,9 @@ This section contains documentation about our infrastructure
 
 ## Services
 
-```{toctree}
-:maxdepth: 1
-
-Project services <services.md>
-Administrator's handbook <admin.md>
-```
+* [Project services](services.md)
+* [Administrator's handbook](admin.md)
 
 ## Jenkins builders and builds
-```{toctree}
-:maxdepth: 1
-
-Setting up Jenkins build machines <builders.md>
-Coverity Scan integration <coverity.md>
-```
+* [Setting up Jenkins build machines](builders.md)
+* [Coverity Scan integration](coverity.md)

Documentation/lib/index.md

@@ -3,11 +3,7 @@
 This section contains documentation about coreboot internal technical
 information and libraries.
 
-```{toctree}
-:maxdepth: 1
-
-Flashmap and Flashmap Descriptor <flashmap.md>
-ABI data consumption <abi-data-consumption.md>
-Timestamps <timestamp.md>
-Firmware Configuration Interface <fw_config.md>
-```
+- [Flashmap and Flashmap Descriptor](flashmap.md)
+- [ABI data consumption](abi-data-consumption.md)
+- [Timestamps](timestamp.md)
+- [Firmware Configuration Interface](fw_config.md)

Documentation/lib/payloads/index.md

@@ -8,8 +8,4 @@ selected mainboard.
 
 ## FIT
 
-```{toctree}
-:maxdepth: 1
-
-uImage.FIT support <fit.md>
-```
+- [uImage.FIT support](fit.md)

Documentation/mainboard/acer/g43t-am3.md

@@ -5,7 +5,7 @@ Acer models Aspire M3800, Aspire M5800 and possibly more.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | Intel G43 (called x4x in coreboot code)          |
 +------------------+--------------------------------------------------+
@@ -69,7 +69,7 @@ Tests were done with SeaBIOS 1.14.0 and slackware64-live from 2019-07-12
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +-------------------+---------------------+
 | Type              | Value               |
 +===================+=====================+
@@ -122,7 +122,7 @@ $ sudo flashrom \
   -w coreboot.rom
 ```
 
-```{eval-rst}
+```eval_rst
 In addition to the information here, please see the
 :doc:`../../tutorial/flashing_firmware/index`.
 ```

Documentation/mainboard/amd/pademelon/pademelon.md

@@ -33,7 +33,7 @@ Three items are marked in this picture
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------+
 | Type                | Value              |
 +=====================+====================+
@@ -53,7 +53,7 @@ Three items are marked in this picture
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +---------------+------------------------------+
 | Fan control   | Using fintek F81803A         |
 +---------------+------------------------------+
@@ -63,7 +63,7 @@ Three items are marked in this picture
 
 ## Description of pictures within this document
 
-```{eval-rst}
+```eval_rst
 +----------------------------+----------------------------------------+
 |pademelon.jpg               | Motherboard with components identified |
 +----------------------------+----------------------------------------+

Documentation/mainboard/asrock/h110m-dvs.md

@@ -11,7 +11,7 @@ Intel company provides [Firmware Support Package (2.0)](../../soc/intel/fsp/inde
 
 FSP Information:
 
-```{eval-rst}
+```eval_rst
 +-----------------------------+-------------------+-------------------+
 | FSP Project Name            | Directory         | Specification     |
 +-----------------------------+-------------------+-------------------+
@@ -114,7 +114,7 @@ facing towards the bottom of the board.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | CPU              | Intel Skylake/Kaby Lake (LGA1151)                |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asrock/h77pro4-m.md

@@ -5,7 +5,7 @@ Bridge and Ivy Bridge CPUs.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+
@@ -71,7 +71,7 @@ extlinux
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -115,7 +115,7 @@ $ sudo flashrom --noverify-all --ifd -i bios -p internal -w coreboot.rom
 The use of `--noverify-all` is required since the Management Engine
 region is not readable even by the host.
 
-```{eval-rst}
+```eval_rst
 In addition to the information here, please see the
 :doc:`../../tutorial/flashing_firmware/index`.
 ```

Documentation/mainboard/asrock/h81m-hds.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASRock H81M-HDS].
 
 ## Required proprietary blobs
 
-```{eval-rst}
+```eval_rst
 Please see :doc:`../../northbridge/intel/haswell/mrc.bin`.
 ```
 
@@ -75,7 +75,7 @@ facing towards the bottom of the board.
   in coreboot. The `coretemp` driver can still be used for accurate CPU
   temperature readings from an OS.
 
-```{eval-rst}
+```eval_rst
 Please also see :doc:`../../northbridge/intel/haswell/known-issues`.
 ```
 
@@ -111,7 +111,7 @@ Please also see :doc:`../../northbridge/intel/haswell/known-issues`.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/haswell/index`     |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/a88xm-e.md

@@ -14,7 +14,7 @@ and their GPU is [Sea Islands] (GCN2-based).
 
 A10 Richland is recommended for the best performance and working IOMMU.
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | A88XM-E          |                                                  |
 +------------------+--------------------------------------------------+
@@ -36,7 +36,7 @@ A10 Richland is recommended for the best performance and working IOMMU.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+

Documentation/mainboard/asus/f2a85-m.md

@@ -15,7 +15,7 @@ Both "Trinity" and "Richland" desktop processing units are working,
 the CPU architecture in these CPUs/APUs is [Piledriver],
 and their GPU is [TeraScale 3] (VLIW4-based).
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | F2A85-M          |                                                  |
 +------------------+--------------------------------------------------+
@@ -35,7 +35,7 @@ and their GPU is [TeraScale 3] (VLIW4-based).
 +------------------+--------------------------------------------------+
 ```
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | F2A85-M LE       |                                                  |
 +------------------+--------------------------------------------------+
@@ -55,7 +55,7 @@ and their GPU is [TeraScale 3] (VLIW4-based).
 +------------------+--------------------------------------------------+
 ```
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | F2A85-M PRO      |                                                  |
 +------------------+--------------------------------------------------+
@@ -77,7 +77,7 @@ and their GPU is [TeraScale 3] (VLIW4-based).
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+

Documentation/mainboard/asus/p2b-ls.md

@@ -10,7 +10,7 @@ This page describes how to run coreboot on the ASUS P2B-LS mainboard.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+---------------------------+
 | Type                | Value                     |
 +=====================+===========================+
@@ -90,7 +90,7 @@ for only CPU models that the board will actually be run with.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | Intel I440BX                                     |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p3b-f.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the ASUS P3B-F mainboard.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+---------------------------+
 | Type                | Value                     |
 +=====================+===========================+
@@ -88,7 +88,7 @@ for only CPU models that the board will actually be run with.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | Intel I440BX                                     |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p5q.md

@@ -32,7 +32,7 @@ This page describes how to run coreboot on the [ASUS P5Q] desktop board.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +-------------------+----------------+
 | Type              | Value          |
 +===================+================+
@@ -56,7 +56,7 @@ You can flash coreboot into your motherboard using [this guide].
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+---------------------------------------------------+
 | Northbridge      | Intel P45 (called x4x in coreboot code)           |
 +------------------+---------------------------------------------------+

Documentation/mainboard/asus/p8c_ws.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8H77-V].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -69,7 +69,7 @@ flash externally.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8h61-m_lx.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8H61-M LX].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -84,7 +84,7 @@ region is not readable even by the host.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8h61-m_pro.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8H61-M Pro].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -78,7 +78,7 @@ region is not readable even by the host.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8h77-v.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8H77-V].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -56,7 +56,7 @@ work. The flash chip is socketed, so it's easy to remove and reflash.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8z77-m.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8Z77-M].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -112,7 +112,7 @@ therefore they currently do nothing under coreboot.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8z77-m_pro.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8Z77-M PRO]
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -143,7 +143,7 @@ easy to remove and reflash.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/p8z77-v.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [ASUS P8Z77-V].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -86,7 +86,7 @@ See [Asus Wi-Fi Go! v1].
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/asus/wifigo_v1.md

@@ -8,7 +8,7 @@ through a proprietary 16-1 pin connector.
 I managed to grope the most pinout of the proprietary connector.
 See [Mini PCIe pinout] for more info.
 
-```{eval-rst}
+```eval_rst
 +------------+----------+-----------+------------+----------+-----------+
 | WIFIGO Pin | Usage    | mPCIe pin | WIFIGO Pin | Usage    | mPCIe pin |
 +============+==========+===========+============+==========+===========+

Documentation/mainboard/cavium/cn8100_sff_evb.md

@@ -17,7 +17,7 @@
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+----------------+
 | Type                | Value          |
 +=====================+================+
@@ -58,7 +58,7 @@
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +---------------+----------------------------------------+
 | SoC           | :doc:`../../soc/cavium/cn81xx/index`   |
 +---------------+----------------------------------------+

Documentation/mainboard/clevo/n130wu/index.md

@@ -2,7 +2,7 @@
 
 ## Hardware
 ### Technology
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------+
 | CPU              | Intel i7-8550U                 |
 +------------------+--------------------------------+
@@ -15,7 +15,7 @@
 ```
 
 ### Flash chip
-```{eval-rst}
+```eval_rst
 +---------------------+-----------------+
 | Type                | Value           |
 +=====================+=================+

Documentation/mainboard/dell/e7240.md

@@ -1,83 +0,0 @@
-# Dell Latitude E7240
-
-This page is about the notebook [Dell Latitude E7240].
-
-## Release status
-
-Dell Latitude E7240 was released in 2013 and is now end of life.
-It can be bought from a secondhand market like Taobao or eBay.
-
-## Required proprietary blobs
-
-The following blobs are required to operate the hardware:
-1. mrc.bin
-2. Intel ME firmware
-
-Memory reference code in mrc.bin is used to initialize the Haswell platform.
-You need this blob to build a working coreboot image. Please read
-[mrc.bin](../../northbridge/intel/haswell/mrc.bin) for instructions on
-retrieving and using it.
-
-Intel ME firmware is in the flash chip. It is not needed when building coreboot.
-It can be extracted from the OEM firmware. You can also flash only the BIOS
-region to leave Intel ME firmware untouched.
-
-## Programming
-
-The laptop can be flashed internally under OEM firmware using [dell-flash-unlock].
-
-To flash with an external programmer, you need to remove the battery and the base cover.
-
-![Dell Latitude E7240 mainboard](e7240.webp)
-
-For more details have a look at the general [flashing tutorial].
-
-It is also possible to flash internally under coreboot.
-
-## Debugging
-
-The board can be debugged with EHCI debug. The EHCI debug port is next to the miniDP port.
-
-There's a serial port on dock, but it's not yet supported in coreboot.
-
-Schematic of this laptop can be found online. The board name is Compal LA-9431P.
-
-## Test status
-
-### Not working
-
-- EC ACPI
-- SD/MMC card reader (kernel reports "Timeout waiting for hardware cmd interrupt.")
-- No internal display before booting to OS when connected with a dock
-
-### Working
-
-- Integrated graphics init with libgfxinit
-- mSATA
-- WLAN
-- USB
-- Keyboard
-- Touchpad and the buttons on it
-- Dock: all USB ports, DisplayPort, eSATA
-- Internal flashing
-
-
-## Technology
-
-```{eval-rst}
-+------------------+-----------------------------+
-| CPU              | Intel Haswell-ULT           |
-+------------------+-----------------------------+
-| PCH              | Intel Lynx Point Low Power  |
-+------------------+-----------------------------+
-| EC               | SMSC MEC5075                |
-+------------------+-----------------------------+
-| Super I/O        | SMSC ECE5048                |
-+------------------+-----------------------------+
-| Coprocessor      | Intel Management Engine     |
-+------------------+-----------------------------+
-```
-
-[Dell Latitude E7240]: https://www.dell.com/support/home/en-us/product-support/product/latitude-e7240-ultrabook/docs
-[dell-flash-unlock]: https://github.com/nic3-14159/dell-flash-unlock
-[flashing tutorial]: ../../tutorial/flashing_firmware/ext_power.md

Documentation/mainboard/dell/optiplex_9010.md

@@ -6,7 +6,7 @@ This page describes how to run coreboot on Dell OptiPlex 9010 SFF.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------+---------------------------------------------------------------+
 | CPU        | Intel Core 2nd Gen (Sandybridge) or 3rd Gen (Ivybridge)       |
 +------------+---------------------------------------------------------------+
@@ -28,7 +28,7 @@ More specifications on [Dell OptiPlex 9010 specifications].
 
 ## Required proprietary blobs
 
-```{eval-rst}
+```eval_rst
 +------------------+---------------------------------+---------------------+
 | Binary file      | Apply                           | Required / Optional |
 +==================+=================================+=====================+
@@ -50,7 +50,7 @@ signature `SMSCUBIM`. The easiest way to do this is to use [UEFITool] and
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------------+
 | Type                | Value                    |
 +=====================+==========================+

Documentation/mainboard/emulation/qemu-riscv.md

@@ -3,9 +3,6 @@
 ## Building coreboot and running it in QEMU
 
 - Configure coreboot and run `make` as usual
-
-Run QEMU
-```
-qemu-system-riscv64 -M virt -m 1G -nographic -bios build/coreboot.rom \
-                    -drive if=pflash,file=./build/coreboot.rom,format=raw
-```
+- Run `util/riscv/make-spike-elf.sh build/coreboot.rom build/coreboot.elf` to
+  convert coreboot to an ELF that QEMU can load
+- Run `qemu-system-riscv64 -M virt -m 1024M -nographic -kernel build/coreboot.elf`

Documentation/mainboard/emulation/qemu-sbsa.md

@@ -1,42 +0,0 @@
-# QEMU SBSA emulator
-This page describes how to build and run ```coreboot``` for QEMU's sbsa-ref machine.
-The qemu-sbsa ```coreboot``` image acts as BL-3.3 for Arm Trusted Firmware (```TF-A```) and
-mainly takes care of setting up SMBIOS and ACPI tables, hence, in order to boot,
-you also need to supply a ```TF-A``` image.
-
-## Building TF-A
-
-You can build ```TF-A``` from source by fetching
-```
-https://github.com/ARM-software/arm-trusted-firmware
-```
-and building the qemu-sbsa platform
-```
-PLAT=qemu_sbsa
-```
-Upon entry, ```coreboot``` expects a FDT pointer in x0, so make sure to compile ```TF-A``` with
-```
-ARM_LINUX_KERNEL_AS_BL33=1
-```
-This will force ```TF-A``` to pass a pointer to the FDT in x0.
-
-## Building coreboot
-
-Simply select the qemu-sbsa board and, optionally, configure a payload. We recommend
-the ```leanefi``` payload. ```leanefi``` will setup a minimal set of UEFI services, just enough
-to boot into a linux kernel.
-
-## Running coreboot in QEMU
-
-Once you have obtained ```TF-A``` and ```coreboot``` images, launch qemu via
-
-```bash
-qemu-system-aarch64 -nographic -m 1024 -M sbsa-ref -pflash <path/to/TFA.fd> \
-                                                   -pflash <path/to/coreboot.rom>
-```
-
-## LBBR bootflow
-
-arm and 9elements worked together in order to create a LBBR compliant bootflow
-consisting of ```TF-A```, ```coreboot```, ```leanefi``` and ```LinuxBoot```. A proof of concept
-can be found here https://gitlab.arm.com/systemready/firmware-build/linuxboot/lbbr-coreboot-poc

Documentation/mainboard/facebook/fbg1701.md

@@ -63,7 +63,7 @@ Specifically, it's a Winbond W25Q64FV (3.3V), whose datasheet can be found
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | SoC              | Intel Atom Processor N3710                       |
 +------------------+--------------------------------------------------+

Documentation/mainboard/facebook/monolith.md

@@ -14,7 +14,7 @@ Intel company provides [Firmware Support Package (2.0)](../../soc/intel/fsp/inde
 
 FSP Information:
 
-```{eval-rst}
+```eval_rst
 +-----------------------------+-------------------+-------------------+
 | FSP Project Name            | Directory         | Specification     |
 +-----------------------------+-------------------+-------------------+
@@ -116,7 +116,7 @@ output.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | SoC              | Intel Kaby Lake U                                |
 +------------------+--------------------------------------------------+

Documentation/mainboard/foxconn/d41s.md

@@ -14,7 +14,7 @@ The default options for this board should result in a fully working image:
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+--------+
 | Type                | Value  |
 +=====================+========+
@@ -56,7 +56,7 @@ To do this gently take the SPI flash out of its socket and flash with your progr
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+------------------+
 | Northbridge      | Intel Pinevew    |
 +------------------+------------------+

Documentation/mainboard/gigabyte/ga-g41m-es2l.md

@@ -6,7 +6,7 @@ This motherboard [also works with Libreboot](https://libreboot.org/docs/install/
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Type             | Value                                            |
 +==================+==================================================+
@@ -30,7 +30,7 @@ This motherboard [also works with Libreboot](https://libreboot.org/docs/install/
 
 ## Preparation
 
-```{eval-rst}
+```eval_rst
 For more datails how to get sources and build the toolchain, see :doc:`../../tutorial/part1`.
 ```
 
@@ -140,7 +140,7 @@ Built gigabyte/ga-g41m-es2l (GA-G41M-ES2L)
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 In addition to the information here, please see the
 :doc:`../../tutorial/flashing_firmware/index`.
 ```

Documentation/mainboard/gigabyte/ga-h61m-s2pv.md

@@ -5,7 +5,7 @@ from [Gigabyte].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -59,7 +59,7 @@ However, this makes DualBIOS unable to recover from a bad flash for some reason.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/2170p.md

@@ -74,7 +74,7 @@ The EHCI debug port is the left USB3 port.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | CPU              | Intel Sandy/Ivy Bridge (FCPGA988)                |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/2560p.md

@@ -80,7 +80,7 @@ Schematic of this laptop can be found on [Lab One].
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | CPU              | Intel Sandy/Ivy Bridge (FCPGA988)                |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/8560w.md

@@ -1,80 +0,0 @@
-# HP EliteBook 8560w
-
-This page describes how to run coreboot on the [HP EliteBook 8560w].
-
-## Required proprietary blobs
-
-- Intel Firmware Descriptor, ME and GbE firmware
-- EC: please read [HP Laptops with KBC1126 Embedded Controller](hp_kbc1126_laptops)
-
-## Flashing instructions
-
-When running vendor firmware, external flashing is needed.
-
-HP EliteBook 8560w has an 8MiB SOIC-8 flash chip on the bottom of the
-mainboard. You just need to remove the service cover, and use an SOIC-8
-clip to read and flash the chip.
-
-![8560w_chip_location](8560w_flash.webp)
-
-```{eval-rst}
-+---------------------+------------+
-| Type                | Value      |
-+=====================+============+
-| Socketed flash      | no         |
-+---------------------+------------+
-| Model               | MX25L6406E |
-+---------------------+------------+
-| Size                | 8 MiB      |
-+---------------------+------------+
-| Package             | SOIC-8     |
-+---------------------+------------+
-| Write protection    | no         |
-+---------------------+------------+
-| Dual BIOS feature   | no         |
-+---------------------+------------+
-| In circuit flashing | yes        |
-+---------------------+------------+
-| Internal flashing   | yes        |
-+---------------------+------------+
-```
-
-## Working
-
-- i7-2720QM, 8G+8G
-- Arch Linux boot from SeaBIOS payload
-- EHCI debug: the port is beside the eSATA port
-- SATA
-- eSATA
-- USB2 and USB3
-- keyboard
-- Gigabit Ethernet
-- WLAN
-- WWAN
-- VGA and DisplayPort
-- audio
-- EC ACPI
-- Using `me_cleaner`
-- dock: PS/2 keyboard, USB, DisplayPort
-- TPM
-- S3 suspend/resume
-
-## Technology
-
-```{eval-rst}
-+------------------+--------------------------------------------------+
-| Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
-+------------------+--------------------------------------------------+
-| Southbridge      | bd82x6x                                          |
-+------------------+--------------------------------------------------+
-| CPU              | model_206ax                                      |
-+------------------+--------------------------------------------------+
-| Super I/O        | SMSC LPC47n217                                   |
-+------------------+--------------------------------------------------+
-| EC               | SMSC KBC1126                                     |
-+------------------+--------------------------------------------------+
-| Coprocessor      | Intel Management Engine                          |
-+------------------+--------------------------------------------------+
-```
-
-[HP EliteBook 8560w]: https://support.hp.com/us-en/product/hp-elitebook-8560w-mobile-workstation/5071171

Documentation/mainboard/hp/8760w.md

@@ -7,7 +7,7 @@ checkout the [code on gerrit] to build coreboot for the laptop.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -66,7 +66,7 @@ clip to read and flash the chip.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/compaq_8200_sff.md

@@ -13,7 +13,7 @@ The following things are still missing from this coreboot port:
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+-------------------------+
 | Type                | Value                   |
 +=====================+=========================+
@@ -128,7 +128,7 @@ as otherwise there's not enough space near the flash.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/compaq_8300_usdt.md

@@ -5,7 +5,7 @@ from [HP].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+-------------+
 | Type                | Value       |
 +=====================+=============+
@@ -42,7 +42,7 @@ Wake on LAN is active works great.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/hp/elitebook_820_g2.md

@@ -124,7 +124,7 @@ The board can be debugged with EHCI debug. The EHCI debug port is the USB port o
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+-----------------------------+
 | SoC              | Intel Broadwell             |
 +------------------+-----------------------------+

Documentation/mainboard/hp/folio_9480m.md

@@ -138,7 +138,7 @@ The board can be debugged with EHCI debug. The EHCI debug port is the USB port o
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+-----------------------------+
 | CPU              | Intel Haswell-ULT           |
 +------------------+-----------------------------+

Documentation/mainboard/hp/pro_3500_series.md

@@ -1,103 +0,0 @@
-# HP Pro 3500 Series
-
-This page describes how to run coreboot on the [Pro 3500 Series]
-desktop from [HP].
-
-## State
-
-All peripherals should work. Automatic fan control as well as S3 are
-working. The board was tested to boot Linux and Windows. EHCI debug
-is untested. When using MrChromebox edk2 with secure boot build in, the
-board will hang on each boot for about 20 seconds before continuing.
-With disabled ME, the SuperIO will not get CPU temperatures via PECI and
-therefore the automatic fan control will not increase the fan speed.
-
-## Flashing coreboot
-
-```{eval-rst}
-+---------------------+-------------------------+
-| Type                | Value                   |
-+=====================+=========================+
-| Socketed flash      | No                      |
-+---------------------+-------------------------+
-| Model               | W25Q64FVSIG             |
-+---------------------+-------------------------+
-| Size                | 8 MiB                   |
-+---------------------+-------------------------+
-| In circuit flashing | Yes                     |
-+---------------------+-------------------------+
-| Package             | SOIC-8                  |
-+---------------------+-------------------------+
-| Write protection    | See below               |
-+---------------------+-------------------------+
-| Dual BIOS feature   | No                      |
-+---------------------+-------------------------+
-| Internal flashing   | Yes                     |
-+---------------------+-------------------------+
-```
-
-### Flash layout
-The original layout of the flash should look like this:
-```
-00000000:00000fff fd
-00400000:007fffff bios
-00001000:003fffff me
-00fff000:00000fff gbe
-00fff000:00000fff pd
-```
-
-### Internal programming
-
-The SPI flash can be accessed using [flashrom] (although it reports as
-"N25Q064..3E", it works fine).
-
-With a missing FDO jumper, `fd` region is read-only, `bios` region is
-read-write and `me` region is locked. Vendor firmware will additionally
-protect the flash chip. After shorting the FDO jumper (E2) full
-read-write access is granted.
-
-Do **NOT shutdown** the operating system **after flashing** coreboot
-from the vendor firmware! This will brick your device because the bios
-region will be modified on shutdown. Cut the AC power or do a restart
-from the OS.
-
-**Position of FDO jumper (E2) close to the F_USB3**
-![][pro_3500_jumper]
-
-[pro_3500_jumper]: pro_3500_series_jumper.avif
-
-### External programming
-
-External programming with an SPI adapter and [flashrom] does work, but
-it powers the whole southbridge complex. The average current will be
-400mA but spikes may be higher. Connect the power to the flash or the
-programming header next to the flash otherwise programming is unstable.
-The supply needs to quickly reach 3V3 or else the chip is also unstable
-until cleanly power cycled.
-
-**Position of SOIC-8 flash and pin-header near ATX power connector**
-![][pro_3500_flash]
-
-[pro_3500_flash]: pro_3500_series_flash.avif
-
-## Technology
-
-```{eval-rst}
-+------------------+--------------------------------------------------+
-| Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
-+------------------+--------------------------------------------------+
-| Southbridge      | bd82x6x (bd82h61)                                |
-+------------------+--------------------------------------------------+
-| CPU              | model_206ax                                      |
-+------------------+--------------------------------------------------+
-| SuperIO          | IT8779E (identifies as IT8772F via register)     |
-+------------------+--------------------------------------------------+
-| EC               | Fixed function as part of SuperIO                |
-+------------------+--------------------------------------------------+
-| Coprocessor      | Intel ME                                         |
-+------------------+--------------------------------------------------+
-```
-
-[Pro 3500 Series]: https://support.hp.com/us-en/document/c03364089
-[HP]: https://www.hp.com/
-[flashrom]: https://flashrom.org/Flashrom

Documentation/mainboard/hp/z220_sff.md

@@ -13,7 +13,7 @@ The following things are still missing from this coreboot port:
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+-------------+
 | Type                | Value       |
 +=====================+=============+
@@ -58,7 +58,7 @@ even interchangeable, so should do coreboot images built for them.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+

Documentation/mainboard/index.md

@@ -4,397 +4,240 @@ This section contains documentation about coreboot on specific mainboards.
 
 ## 51NB
 
-```{toctree}
-:maxdepth: 1
-
-X210 <51nb/x210.md>
-```
+- [X210](51nb/x210.md)
 
 ## Acer
 
-```{toctree}
-:maxdepth: 1
-
-G43T-AM3 <acer/g43t-am3.md>
-```
+- [G43T-AM3](acer/g43t-am3.md)
 
 ## AMD
-```{toctree}
-:maxdepth: 1
-
-pademelon <amd/pademelon/pademelon.md>
-```
+- [pademelon](amd/pademelon/pademelon.md)
 
 ## ASRock
 
-```{toctree}
-:maxdepth: 1
-
-H77 Pro4-M <asrock/h77pro4-m.md>
-H81M-HDS <asrock/h81m-hds.md>
-H110M-DVS <asrock/h110m-dvs.md>
-```
+- [H77 Pro4-M](asrock/h77pro4-m.md)
+- [H81M-HDS](asrock/h81m-hds.md)
+- [H110M-DVS](asrock/h110m-dvs.md)
 
 ## ASUS
 
-```{toctree}
-:maxdepth: 1
-
-A88XM-E <asus/a88xm-e.md>
-F2A85-M <asus/f2a85-m.md>
-P2B-LS <asus/p2b-ls.md>
-P3B-F <asus/p3b-f.md>
-P5Q <asus/p5q.md>
-P8C WS <asus/p8c_ws.md>
-P8H61-M LX <asus/p8h61-m_lx.md>
-P8H61-M Pro <asus/p8h61-m_pro.md>
-P8H77-V <asus/p8h77-v.md>
-P8Z77-M <asus/p8z77-m.md>
-P8Z77-M Pro <asus/p8z77-m_pro.md>
-P8Z77-V <asus/p8z77-v.md>
-wifigo_v1 <asus/wifigo_v1.md>
-```
+- [A88XM-E](asus/a88xm-e.md)
+- [F2A85-M](asus/f2a85-m.md)
+- [P2B-LS](asus/p2b-ls.md)
+- [P3B-F](asus/p3b-f.md)
+- [P5Q](asus/p5q.md)
+- [P8C WS](asus/p8c_ws.md)
+- [P8H61-M LX](asus/p8h61-m_lx.md)
+- [P8H61-M Pro](asus/p8h61-m_pro.md)
+- [P8H77-V](asus/p8h77-v.md)
+- [P8Z77-M](asus/p8z77-m.md)
+- [P8Z77-M Pro](asus/p8z77-m_pro.md)
+- [P8Z77-V](asus/p8z77-v.md)
+- [wifigo_v1](asus/wifigo_v1.md)
 
 ## Cavium
 
-```{toctree}
-:maxdepth: 1
-
-CN81XX EVB SFF <cavium/cn8100_sff_evb.md>
-```
+- [CN81XX EVB SFF](cavium/cn8100_sff_evb.md)
 
 ## Clevo
 
-```{toctree}
-:maxdepth: 1
-
-N130WU / N131WU <clevo/n130wu/index.md>
-```
+- [N130WU / N131WU](clevo/n130wu/index.md)
 
 ## Dell
 
-```{toctree}
-:maxdepth: 1
-
-Latitude E7240 <dell/e7240.md>
-OptiPlex 9010 SFF <dell/optiplex_9010.md>
-```
+- [OptiPlex 9010 SFF](dell/optiplex_9010.md)
 
 ## Emulation
 
 The boards in this section are not real mainboards, but emulators.
 
-```{toctree}
-:maxdepth: 1
-
-Spike RISC-V emulator <emulation/spike-riscv.md>
-QEMU RISC-V emulator <emulation/qemu-riscv.md>
-QEMU AArch64 emulator <emulation/qemu-aarch64.md>
-QEMU SBSA emulator <emulation/qemu-sbsa.md>
-QEMU x86 Q35 <emulation/qemu-q35.md>
-QEMU x86 PC <emulation/qemu-i440fx.md>
-QEMU POWER9 <emulation/qemu-power9.md>
-```
+- [Spike RISC-V emulator](emulation/spike-riscv.md)
+- [QEMU RISC-V emulator](emulation/qemu-riscv.md)
+- [QEMU AArch64 emulator](emulation/qemu-aarch64.md)
+- [QEMU x86 Q35](emulation/qemu-q35.md)
+- [QEMU x86 PC](emulation/qemu-i440fx.md)
+- [QEMU POWER9](emulation/qemu-power9.md)
 
 ## Facebook
 
-```{toctree}
-:maxdepth: 1
-
-FBG-1701 <facebook/fbg1701.md>
-Monolith <facebook/monolith.md>
-```
+- [FBG-1701](facebook/fbg1701.md)
+- [Monolith](facebook/monolith.md)
 
 ## Foxconn
 
-```{toctree}
-:maxdepth: 1
-
-D41S <foxconn/d41s.md>
-```
+- [D41S](foxconn/d41s.md)
 
 ## Gigabyte
 
-```{toctree}
-:maxdepth: 1
-
-GA-G41M-ES2L <gigabyte/ga-g41m-es2l.md>
-GA-H61M-S2PV <gigabyte/ga-h61m-s2pv.md>
-```
+- [GA-G41M-ES2L](gigabyte/ga-g41m-es2l.md)
+- [GA-H61M-S2PV](gigabyte/ga-h61m-s2pv.md)
 
 ## HP
 
-```{toctree}
-:maxdepth: 1
-
-Compaq 8200 Elite SFF <hp/compaq_8200_sff.md>
-Compaq Elite 8300 USDT <hp/compaq_8300_usdt.md>
-Pro 3500 Series <hp/pro_3500_series.md>
-Z220 Workstation SFF <hp/z220_sff.md>
-```
+- [Compaq 8200 Elite SFF](hp/compaq_8200_sff.md)
+- [Compaq Elite 8300 USDT](hp/compaq_8300_usdt.md)
+- [Z220 Workstation SFF](hp/z220_sff.md)
 
 ### EliteBook series
 
-```{toctree}
-:maxdepth: 1
-
-HP Laptops with KBC1126 EC <hp/hp_kbc1126_laptops.md>
-HP Sure Start <hp/hp_sure_start.md>
-EliteBook 2170p <hp/2170p.md>
-EliteBook 2560p <hp/2560p.md>
-EliteBook 8560w <hp/8560w.md>
-EliteBook 8760w <hp/8760w.md>
-EliteBook Folio 9480m <hp/folio_9480m.md>
-EliteBook 820 G2 <hp/elitebook_820_g2.md>
-```
+- [HP Laptops with KBC1126 EC](hp/hp_kbc1126_laptops.md)
+- [HP Sure Start](hp/hp_sure_start.md)
+- [EliteBook 2170p](hp/2170p.md)
+- [EliteBook 2560p](hp/2560p.md)
+- [EliteBook 8760w](hp/8760w.md)
+- [EliteBook Folio 9480m](hp/folio_9480m.md)
+- [EliteBook 820 G2](hp/elitebook_820_g2.md)
 
 ## Intel
 
-```{toctree}
-:maxdepth: 1
-
-DG43GT <intel/dg43gt.md>
-DQ67SW <intel/dq67sw.md>
-KBLRVP11 <intel/kblrvp11.md>
-```
+- [DG43GT](intel/dg43gt.md)
+- [DQ67SW](intel/dq67sw.md)
+- [KBLRVP11](intel/kblrvp11.md)
 
 ## Kontron
 
-```{toctree}
-:maxdepth: 1
-
-mAL-10 <kontron/mal10.md>
-```
+- [mAL-10](kontron/mal10.md)
 
 ## Lenovo
 
-```{toctree}
-:maxdepth: 1
-
-Mainboard codenames <lenovo/codenames.md>
-Hardware Maintenance Manual of ThinkPads <lenovo/thinkpad_hmm.md>
-R60 <lenovo/r60.md>
-T4xx common <lenovo/t4xx_series.md>
-X2xx common <lenovo/x2xx_series.md>
-vboot <lenovo/vboot.md>
-```
+- [Mainboard codenames](lenovo/codenames.md)
+- [Hardware Maintenance Manual of ThinkPads](lenovo/thinkpad_hmm.md)
+- [R60](lenovo/r60.md)
+- [T4xx common](lenovo/t4xx_series.md)
+- [X2xx common](lenovo/x2xx_series.md)
+- [vboot](lenovo/vboot.md)
 
 ### GM45 series
 
-```{toctree}
-:maxdepth: 1
-
-X200 / T400 / T500 / X301 common <lenovo/montevina_series.md>
-X301 <lenovo/x301.md>
-```
+- [X200 / T400 / T500 / X301 common](lenovo/montevina_series.md)
+- [X301](lenovo/x301.md)
 
 ### Arrandale series
 
-```{toctree}
-:maxdepth: 1
-
-T410 <lenovo/t410.md>
-```
+- [T410](lenovo/t410.md)
 
 ### Sandy Bridge series
 
-```{toctree}
-:maxdepth: 1
-
-T420 <lenovo/t420.md>
-T420 / T520 / X220 / T420s / W520 common <lenovo/Sandy_Bridge_series.md>
-X1 <lenovo/x1.md>
-```
+- [T420](lenovo/t420.md)
+- [T420 / T520 / X220 / T420s / W520 common](lenovo/Sandy_Bridge_series.md)
+- [X1](lenovo/x1.md)
 
 ### Ivy Bridge series
 
-```{toctree}
-:maxdepth: 1
-
-T430 <lenovo/t430.md>
-T530 / W530 <lenovo/w530.md>
-T430 / T530 / X230 / W530 common <lenovo/Ivy_Bridge_series.md>
-T431s <lenovo/t431s.md>
-X230s <lenovo/x230s.md>
-Internal flashing <lenovo/ivb_internal_flashing.md>
-```
+- [T430](lenovo/t430.md)
+- [T530 / W530](lenovo/w530.md)
+- [T430 / T530 / X230 / W530 common](lenovo/Ivy_Bridge_series.md)
+- [T431s](lenovo/t431s.md)
+- [X230s](lenovo/x230s.md)
+- [Internal flashing](lenovo/ivb_internal_flashing.md)
 
 ### Haswell series
 
-```{toctree}
-:maxdepth: 1
-
-T440p <lenovo/t440p.md>
-```
+- [T440p](lenovo/t440p.md)
 
 ## Libretrend
 
-```{toctree}
-:maxdepth: 1
-
-LT1000 <libretrend/lt1000.md>
-```
+- [LT1000](libretrend/lt1000.md)
 
 ## MSI
 
-```{toctree}
-:maxdepth: 1
-
-MS-7707 <msi/ms7707/ms7707.md>
-```
+- [MS-7707](msi/ms7707/ms7707.md)
 
 ## OCP
 
-```{toctree}
-:maxdepth: 1
-
-Delta Lake <ocp/deltalake.md>
-Tioga Pass <ocp/tiogapass.md>
-```
+- [Delta Lake](ocp/deltalake.md)
+- [Tioga Pass](ocp/tiogapass.md)
 
 ## Open Cellular
 
-```{toctree}
-:maxdepth: 1
-
-Elgon <opencellular/elgon.md>
-```
+- [Elgon](opencellular/elgon.md)
 
 ## PC Engines
 
-```{toctree}
-:maxdepth: 1
-
-APU1 <pcengines/apu1.md>
-APU2 <pcengines/apu2.md>
-```
+- [APU1](pcengines/apu1.md)
+- [APU2](pcengines/apu2.md)
 
 ## Portwell
 
-```{toctree}
-:maxdepth: 1
-
-PQ7-M107 <portwell/pq7-m107.md>
-```
+- [PQ7-M107](portwell/pq7-m107.md)
 
 ## Prodrive
 
-```{toctree}
-:maxdepth: 1
-
-Hermes <prodrive/hermes.md>
-```
+- [Hermes](prodrive/hermes.md)
 
 ## Purism
 
-```{toctree}
-:maxdepth: 1
-
-Librem 14 <purism/librem_14.md>
-Librem Mini <purism/librem_mini.md>
-```
+- [Librem 14](purism/librem_14.md)
+- [Librem Mini](purism/librem_mini.md)
 
 ## Protectli
 
-```{toctree}
-:maxdepth: 1
-
-FW2B / FW4B <protectli/fw2b_fw4b.md>
-FW6A / FW6B / FW6C <protectli/fw6.md>
-VP2420 <protectli/vp2420.md>
-VP4630 / VP4650 / VP4670 <protectli/vp46xx.md>
-```
+- [FW2B / FW4B](protectli/fw2b_fw4b.md)
+- [FW6A / FW6B / FW6C](protectli/fw6.md)
+- [VP2420](protectli/vp2420.md)
+- [VP4630 / VP4650 / VP4670](protectli/vp46xx.md)
 
 ## Roda
 
-```{toctree}
-:maxdepth: 1
-
-RK9 Flash Header <roda/rk9/flash_header.md>
-```
+- [RK9 Flash Header](roda/rk9/flash_header.md)
 
 ## SiFive
 
-```{toctree}
-:maxdepth: 1
-
-SiFive HiFive Unleashed <sifive/hifive-unleashed.md>
-```
+- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
 
 ## Star Labs Systems
 
-```{toctree}
-:maxdepth: 1
-
-LabTop Mk III <starlabs/labtop_kbl.md>
-LabTop Mk IV <starlabs/labtop_cml.md>
-StarLite Mk III <starlabs/lite_glk.md>
-StarLite Mk IV <starlabs/lite_glkr.md>
-StarLite Mk V <starlabs/lite_adl.md>
-StarBook Mk V <starlabs/starbook_tgl.md>
-StarBook Mk VI <starlabs/starbook_adl.md>
-Flashing devices <starlabs/common/flashing.md>
-```
+- [LabTop Mk III](starlabs/labtop_kbl.md)
+- [LabTop Mk IV](starlabs/labtop_cml.md)
+- [StarLite Mk III](starlabs/lite_glk.md)
+- [StarLite Mk IV](starlabs/lite_glkr.md)
+- [StarBook Mk V](starlabs/starbook_tgl.md)
+- [StarBook Mk VI](starlabs/starbook_adl.md)
+- [Flashing devices](starlabs/common/flashing.md)
 
 ## Supermicro
 
-```{toctree}
-:maxdepth: 1
-
-X9SAE <supermicro/x9sae.md>
-X10SLM+-F <supermicro/x10slm-f.md>
-X11 LGA1151 series <supermicro/x11-lga1151-series/x11-lga1151-series.md>
-Flashing using the BMC <supermicro/flashing_on_vendorbmc.md>
-```
+- [X9SAE](supermicro/x9sae.md)
+- [X10SLM+-F](supermicro/x10slm-f.md)
+- [X11 LGA1151 series](supermicro/x11-lga1151-series/x11-lga1151-series.md)
+- [Flashing using the BMC](supermicro/flashing_on_vendorbmc.md)
 
 ## System76
 
-```{toctree}
-:maxdepth: 1
-
-Adder Workstation 1 <system76/addw1.md>
-Adder Workstation 2 <system76/addw2.md>
-Adder Workstation 3 <system76/addw3.md>
-Bonobo Workstation 14 <system76/bonw14.md>
-Bonobo Workstation 15 <system76/bonw15.md>
-Darter Pro 6 <system76/darp6.md>
-Darter Pro 7 <system76/darp7.md>
-Darter Pro 8 <system76/darp8.md>
-Darter Pro 9 <system76/darp9.md>
-Galago Pro 4 <system76/galp4.md>
-Galago Pro 5 <system76/galp5.md>
-Galago Pro 6 <system76/galp6.md>
-Galago Pro 7 <system76/galp7.md>
-Gazelle 15 <system76/gaze15.md>
-Gazelle 16 <system76/gaze16.md>
-Gazelle 17 <system76/gaze17.md>
-Gazelle 18 <system76/gaze18.md>
-Lemur Pro 9 <system76/lemp9.md>
-Lemur Pro 10 <system76/lemp10.md>
-Lemur Pro 11 <system76/lemp11.md>
-Lemur Pro 12 <system76/lemp12.md>
-Oryx Pro 5 <system76/oryp5.md>
-Oryx Pro 6 <system76/oryp6.md>
-Oryx Pro 7 <system76/oryp7.md>
-Oryx Pro 8 <system76/oryp8.md>
-Oryx Pro 9 <system76/oryp9.md>
-Oryx Pro 10 <system76/oryp10.md>
-Oryx Pro 11 <system76/oryp11.md>
-Serval Workstation 13 <system76/serw13.md>
-```
+- [Adder Workstation 1](system76/addw1.md)
+- [Adder Workstation 2](system76/addw2.md)
+- [Adder Workstation 3](system76/addw3.md)
+- [Bonobo Workstation 14](system76/bonw14.md)
+- [Bonobo Workstation 15](system76/bonw15.md)
+- [Darter Pro 6](system76/darp6.md)
+- [Darter Pro 7](system76/darp7.md)
+- [Darter Pro 8](system76/darp8.md)
+- [Darter Pro 9](system76/darp9.md)
+- [Galago Pro 4](system76/galp4.md)
+- [Galago Pro 5](system76/galp5.md)
+- [Galago Pro 6](system76/galp6.md)
+- [Galago Pro 7](system76/galp7.md)
+- [Gazelle 15](system76/gaze15.md)
+- [Gazelle 16](system76/gaze16.md)
+- [Gazelle 17](system76/gaze17.md)
+- [Gazelle 18](system76/gaze18.md)
+- [Lemur Pro 9](system76/lemp9.md)
+- [Lemur Pro 10](system76/lemp10.md)
+- [Lemur Pro 11](system76/lemp11.md)
+- [Lemur Pro 12](system76/lemp12.md)
+- [Oryx Pro 5](system76/oryp5.md)
+- [Oryx Pro 6](system76/oryp6.md)
+- [Oryx Pro 7](system76/oryp7.md)
+- [Oryx Pro 8](system76/oryp8.md)
+- [Oryx Pro 9](system76/oryp9.md)
+- [Oryx Pro 10](system76/oryp10.md)
+- [Oryx Pro 11](system76/oryp11.md)
+- [Serval Workstation 13](system76/serw13.md)
 
 ## Texas Instruments
 
-```{toctree}
-:maxdepth: 1
-
-Beaglebone Black <ti/beaglebone-black.md>
-```
+- [Beaglebone Black](ti/beaglebone-black.md)
 
 ## UP
 
-```{toctree}
-:maxdepth: 1
-
-Squared <up/squared/index.md>
-```
+- [Squared](up/squared/index.md)

Documentation/mainboard/intel/dg43gt.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on the [Intel DG43GT] desktop.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -79,7 +79,7 @@ The layout of the header is:
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+---------------------------------------------------+
 | Northbridge      | Intel G43 (called x4x in coreboot code)           |
 +------------------+---------------------------------------------------+

Documentation/mainboard/intel/dq67sw.md

@@ -4,7 +4,7 @@ The Intel DQ67SW is a microATX-sized desktop board for Intel Sandy Bridge CPUs.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | Northbridge      | :doc:`../../northbridge/intel/sandybridge/index` |
 +------------------+--------------------------------------------------+
@@ -67,7 +67,7 @@ The Intel DQ67SW is a microATX-sized desktop board for Intel Sandy Bridge CPUs.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -104,7 +104,7 @@ the PCI configuration space of the LPC Interface Bridge, is set.
 It is possible to program the chip is to attach an external programmer
 with an SOIC-8 clip.
 
-```{eval-rst}
+```eval_rst
 Another way is to boot the vendor firmware in UEFI mode and exploit the
 unpatched S3 Boot Script vulnerability. See this page for a similar procedure:
 :doc:`../lenovo/ivb_internal_flashing`.
@@ -126,7 +126,7 @@ The boot script contains an entry that writes 0x02 to memory at address
 Interface Bridge [0][1]. The value 0x02 sets the BLE bit, and the modification
 prevents this by making it write a 0 instead.
 
-```{eval-rst}
+```eval_rst
 After suspending and resuming the board, the BIOS region can be flashed with
 a coreboot image, e.g. using flashrom. Note that the ME region is not readable,
 so the `--noverify-all` flag is necessary. Please refer to the

Documentation/mainboard/intel/kblrvp11.md

@@ -23,7 +23,7 @@
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -65,7 +65,7 @@ $ flashrom -p internal --ifd -i bios -w coreboot.rom --noverify-all
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+---------------------------------------------------+
 | CPU              | Kaby lake H (i7-7820EQ)                           |
 +------------------+---------------------------------------------------+

Documentation/mainboard/kontron/mal10.md

@@ -6,7 +6,7 @@ processors.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+----------------------------------+
 | COMe Type        | mini pin-out type 10             |
 +------------------+----------------------------------+

Documentation/mainboard/lenovo/Ivy_Bridge_series.md

@@ -3,7 +3,7 @@
 This information is valid for all supported models, except T430s, [T431s](t431s.md) and [X230s](x230s.md).
 
 ## Flashing coreboot
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------------------+
 | Type                | Value                          |
 +=====================+================================+
@@ -37,7 +37,7 @@ This information is valid for all supported models, except T430s, [T431s](t431s.
   exceed 4MiB in size, which means CONFIG_CBFS_SIZE must be smaller than 4MiB.
 * ROM chip size should be set to 12MiB.
 
-```{eval-rst}
+```eval_rst
 Please also have a look at :doc:`../../tutorial/flashing_firmware/index`.
 ```
 
@@ -82,7 +82,7 @@ It is possible to reduce the Intel ME firmware size to free additional
 space for the `bios` region. This is usually referred to as *cleaning the ME* or
 *stripping the ME*.
 After reducing the Intel ME firmware size you must modify the original IFD,
-[split the resulting coreboot ROM](#splitting-the-corebootrom) and then write
+[split the resulting coreboot ROM](#splitting-the-coreboot-rom) and then write
 each ROM using an [external programmer].
 Have a look at [me_cleaner] for more information.
 

Documentation/mainboard/lenovo/Sandy_Bridge_series.md

@@ -1,7 +1,7 @@
 # Lenovo Sandy Bridge series
 
 ## Flashing coreboot
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------+
 | Type                | Value              |
 +=====================+====================+

Documentation/mainboard/lenovo/codenames.md

@@ -1,6 +1,6 @@
 # Lenovo mainboard codenames
 
-```{eval-rst}
+```eval_rst
 .. csv-table::
    :header: "Marketing name", "Development codename"
    :file: codenames.csv

Documentation/mainboard/lenovo/ivb_internal_flashing.md

@@ -19,11 +19,7 @@ that was discovered and fixed later.
 
 - USB drive (in case you need to downgrade BIOS)
 - Linux install that (can be) loaded in UEFI mode
-```{toctree}
-:maxdepth: 1
-
-CHIPSEC <https://github.com/chipsec/chipsec>
-```
+- [CHIPSEC](https://github.com/chipsec/chipsec)
 
 ## BIOS versions
 
@@ -31,7 +27,7 @@ Below is a table of BIOS versions that are vulnerable enough for our
 goals, per model. The version number means that you need to downgrade to
 that or earlier version.
 
-```{eval-rst}
+```eval_rst
 +------------+--------------+
 | Model      | BIOS version |
 +============+==============+

Documentation/mainboard/lenovo/montevina_series.md

@@ -20,7 +20,7 @@ touch any other regions:
 
 ## Installing without ME firmware
 
-```{eval-rst}
+```eval_rst
 .. Note::
    **ThinkPad R500** has slightly different flash layout (it doesn't have
    ``gbe`` region), so the process would be a little different for that model.
@@ -46,12 +46,12 @@ Now you need to patch the flash descriptor. You can either [modify the one from
 your backup with **ifdtool**](#modifying-flash-descriptor-using-ifdtool), or
 [use one from the coreboot repository](#using-checked-in-flash-descriptor-via-bincfg).
 
-### Modifying flash descriptor using ifdtool
+#### Modifying flash descriptor using ifdtool
 
 Pick the layout according to your chip size from the table below and save it to
 the `new_layout.txt` file:
 
-```{eval-rst}
+```eval_rst
 +---------------------------+---------------------------+---------------------------+
 | 4 MiB chip                | 8 MiB chip                | 16 MiB chip               |
 +===========================+===========================+===========================+
@@ -88,7 +88,7 @@ $ mv flashregion_0_flashdescriptor.bin.new.new flashregion_0_flashdescriptor.bin
 
 Continue to the [Configuring coreboot](#configuring-coreboot) section.
 
-### Using checked-in flash descriptor via bincfg
+#### Using checked-in flash descriptor via bincfg
 
 There is a copy of an X200's flash descriptor checked into the coreboot
 repository. It is supposed to work for the T400/T500 as well. The descriptor
@@ -102,7 +102,7 @@ $ make
 If your flash is not 8 MiB, you need to change values of `flcomp_density1` and
 `flreg1_limit` in the `ifd-x200.set` file according to following table:
 
-```{eval-rst}
+```eval_rst
 +-----------------+-------+-------+--------+
 |                 | 4 MiB | 8 MiB | 16 MiB |
 +=================+=======+=======+========+
@@ -119,7 +119,7 @@ $ make gen-ifd-x200
 
 It will be saved to the `flashregion_0_fd.bin` file.
 
-### Configuring coreboot
+#### Configuring coreboot
 
 Now configure coreboot. You need to select correct chip size and specify paths
 to flash descriptor and gbe dump.
@@ -144,7 +144,7 @@ Then build coreboot and flash whole `build/coreboot.rom` to the chip.
 
 The flash layouts of the OEM firmware are as follows:
 
-```{eval-rst}
+```eval_rst
 +---------------------------------+---------------------------------+
 | 4 MiB chip                      | 8 MiB chip                      |
 +=================================+=================================+

Documentation/mainboard/lenovo/t410.md

@@ -5,7 +5,7 @@
 * TPM not working with VBOOT and C_ENV bootblock (works without C_ENV BB)
 
 ## Flashing instructions
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------------------+
 | Type                | Value                          |
 +=====================+================================+

Documentation/mainboard/libretrend/lt1000.md

@@ -10,7 +10,7 @@ Librebox).
 To build a minimal working coreboot image some blobs are required (assuming
 only the BIOS region is being modified).
 
-```{eval-rst}
+```eval_rst
 +-----------------+---------------------------------+---------------------+
 | Binary file     | Apply                           | Required / Optional |
 +=================+=================================+=====================+
@@ -98,7 +98,7 @@ The platform contains an LR-i7S65T1 baseboard (LR-i7S65T2 with two NICs not
 sold yet). More details on [baseboard site]. Unfortunately the board manual is
 not publicly available.
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | CPU              | Intel Core i7-6500U                              |
 +------------------+--------------------------------------------------+

Documentation/mainboard/msi/ms7707/ms7707.md

@@ -9,7 +9,7 @@
 * IME 7.0.4.1197
 
 ## Flash chip (Winbond 25Q32BV)
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------+
 | Type                | Value              |
 +=====================+====================+

Documentation/mainboard/ocp/deltalake.md

@@ -200,7 +200,7 @@ and [u-root] as initramfs.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------------+---------------------------------------------+
 | Processor (1 socket)   | Intel Cooper Lake Scalable Processor        |
 +------------------------+---------------------------------------------+

Documentation/mainboard/ocp/tiogapass.md

@@ -80,7 +80,7 @@ u-root.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------------+---------------------------------------------+
 | Processor (2 sockets)  | Intel Skylake Scalable Processor LGA3647    |
 +------------------------+---------------------------------------------+

Documentation/mainboard/opencellular/elgon.md

@@ -9,7 +9,7 @@ from [OpenCellular].
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+------------+
 | Type                | Value      |
 +=====================+============+
@@ -69,7 +69,7 @@ Dediprog compatible pinout.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +---------------+----------------------------------------+
 | SoC           | :doc:`../../soc/cavium/cn81xx/index`   |
 +---------------+----------------------------------------+

Documentation/mainboard/pcengines/apu1.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on PC Engines APU1 platform.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------+--------------------------------------------------------+
 | CPU        | AMD G series T40E APU                                  |
 +------------+--------------------------------------------------------+
@@ -23,7 +23,7 @@ This page describes how to run coreboot on PC Engines APU1 platform.
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------------+
 | Type                | Value                    |
 +=====================+==========================+

Documentation/mainboard/pcengines/apu2.md

@@ -4,7 +4,7 @@ This page describes how to run coreboot on PC Engines APU2 platform.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------+---------------------------------------------------------------+
 | CPU        | AMD G series GX-412TC                                         |
 +------------+---------------------------------------------------------------+
@@ -25,7 +25,7 @@ This page describes how to run coreboot on PC Engines APU2 platform.
 
 To build working coreboot image some blobs are needed.
 
-```{eval-rst}
+```eval_rst
 +-----------------+---------------------------------+---------------------+
 | Binary file     | Apply                           | Required / Optional |
 +=================+=================================+=====================+
@@ -41,7 +41,7 @@ blobs are listed and available is: *3rdparty/southbridge/amd/avalon/PSP*
 
 ## Flashing coreboot
 
-```{eval-rst}
+```eval_rst
 +---------------------+--------------------------+
 | Type                | Value                    |
 +=====================+==========================+

Documentation/mainboard/portwell/pq7-m107.md

@@ -61,7 +61,7 @@ serial/video/pcie ports might be available.
 
 ## Technology
 
-```{eval-rst}
+```eval_rst
 +------------------+--------------------------------------------------+
 | SoC              | Intel Atom Processor N3710                       |
 +------------------+--------------------------------------------------+