According to document 619503 ADL EDS Vol2, bit 18 of MSR_POWER_CTL must be set to be able to set the Energy/Performance Bias using MSR IA32_ENERGY_PERF_BIAS. Note that since this bit was not set until this patch, the `set_energy_perf_bias(ENERGY_POLICY_NORMAL);' call in `soc_core_init()` was systematically failing. BRANCH=firmware-brya-14505.B BUG=b:239853069 TEST=verify that EPB is set by coreboot Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Change-Id: Ic24abdd7f63f4707b8996da4755a26be148efe4a Reviewed-on: https://review.coreboot.org/c/coreboot/+/66058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
298 lines
6.7 KiB
C
298 lines
6.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
|
|
/*
|
|
* This file is created based on Intel Alder Lake Processor CPU Datasheet
|
|
* Document number: 619501
|
|
* Chapter number: 14
|
|
*/
|
|
|
|
#include <console/console.h>
|
|
#include <device/pci.h>
|
|
#include <device/pci_ids.h>
|
|
#include <cpu/x86/mp.h>
|
|
#include <cpu/x86/msr.h>
|
|
#include <cpu/intel/smm_reloc.h>
|
|
#include <cpu/intel/turbo.h>
|
|
#include <cpu/intel/common/common.h>
|
|
#include <fsp/api.h>
|
|
#include <intelblocks/cpulib.h>
|
|
#include <intelblocks/mp_init.h>
|
|
#include <intelblocks/msr.h>
|
|
#include <intelblocks/acpi.h>
|
|
#include <soc/cpu.h>
|
|
#include <soc/msr.h>
|
|
#include <soc/pci_devs.h>
|
|
#include <soc/soc_chip.h>
|
|
#include <types.h>
|
|
|
|
enum alderlake_model {
|
|
ADL_MODEL_P_M = 0x9A,
|
|
ADL_MODEL_N = 0xBE,
|
|
};
|
|
|
|
bool cpu_soc_is_in_untrusted_mode(void)
|
|
{
|
|
msr_t msr;
|
|
|
|
msr = rdmsr(MSR_BIOS_DONE);
|
|
return !!(msr.lo & ENABLE_IA_UNTRUSTED);
|
|
}
|
|
|
|
void cpu_soc_bios_done(void)
|
|
{
|
|
msr_t msr;
|
|
|
|
msr = rdmsr(MSR_BIOS_DONE);
|
|
msr.lo |= ENABLE_IA_UNTRUSTED;
|
|
wrmsr(MSR_BIOS_DONE, msr);
|
|
}
|
|
|
|
static void soc_fsp_load(void)
|
|
{
|
|
fsps_load();
|
|
}
|
|
|
|
static void configure_misc(void)
|
|
{
|
|
msr_t msr;
|
|
|
|
const config_t *conf = config_of_soc();
|
|
|
|
msr = rdmsr(IA32_MISC_ENABLE);
|
|
msr.lo |= (1 << 0); /* Fast String enable */
|
|
msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */
|
|
wrmsr(IA32_MISC_ENABLE, msr);
|
|
|
|
/* Set EIST status */
|
|
cpu_set_eist(conf->eist_enable);
|
|
|
|
/* Disable Thermal interrupts */
|
|
msr.lo = 0;
|
|
msr.hi = 0;
|
|
wrmsr(IA32_THERM_INTERRUPT, msr);
|
|
|
|
/* Enable package critical interrupt only */
|
|
msr.lo = 1 << 4;
|
|
msr.hi = 0;
|
|
wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
|
|
|
|
/* Enable PROCHOT and Energy/Performance Bias control */
|
|
msr = rdmsr(MSR_POWER_CTL);
|
|
msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input */
|
|
msr.lo |= (1 << 23); /* Lock it */
|
|
msr.lo |= (1 << 18); /* Energy/Performance Bias control */
|
|
wrmsr(MSR_POWER_CTL, msr);
|
|
}
|
|
|
|
enum core_type get_soc_cpu_type(void)
|
|
{
|
|
struct cpuinfo_x86 cpuinfo;
|
|
|
|
if (cpu_is_hybrid_supported())
|
|
return cpu_get_cpu_type();
|
|
|
|
get_fms(&cpuinfo, cpuid_eax(1));
|
|
|
|
if (cpuinfo.x86 == 0x6 && cpuinfo.x86_model == ADL_MODEL_N)
|
|
return CPUID_CORE_TYPE_INTEL_ATOM;
|
|
else
|
|
return CPUID_CORE_TYPE_INTEL_CORE;
|
|
}
|
|
|
|
void soc_get_scaling_factor(u16 *big_core_scal_factor, u16 *small_core_scal_factor)
|
|
{
|
|
*big_core_scal_factor = 127;
|
|
*small_core_scal_factor = 100;
|
|
}
|
|
|
|
bool soc_is_nominal_freq_supported(void)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
/* All CPUs including BSP will run the following function. */
|
|
void soc_core_init(struct device *cpu)
|
|
{
|
|
/* Clear out pending MCEs */
|
|
/* TODO(adurbin): This should only be done on a cold boot. Also, some
|
|
* of these banks are core vs package scope. For now every CPU clears
|
|
* every bank. */
|
|
mca_configure();
|
|
|
|
enable_lapic_tpr();
|
|
|
|
/* Configure Enhanced SpeedStep and Thermal Sensors */
|
|
configure_misc();
|
|
|
|
enable_pm_timer_emulation();
|
|
|
|
/* Enable Direct Cache Access */
|
|
configure_dca_cap();
|
|
|
|
/* Set energy policy */
|
|
set_energy_perf_bias(ENERGY_POLICY_NORMAL);
|
|
|
|
const config_t *conf = config_of_soc();
|
|
/* Set energy-performance preference */
|
|
if (conf->enable_energy_perf_pref)
|
|
if (check_energy_perf_cap())
|
|
set_energy_perf_pref(conf->energy_perf_pref_value);
|
|
/* Enable Turbo */
|
|
enable_turbo();
|
|
}
|
|
|
|
static void per_cpu_smm_trigger(void)
|
|
{
|
|
/* Relocate the SMM handler. */
|
|
smm_relocate();
|
|
}
|
|
|
|
static void pre_mp_init(void)
|
|
{
|
|
soc_fsp_load();
|
|
|
|
const config_t *conf = config_of_soc();
|
|
if (conf->enable_energy_perf_pref) {
|
|
if (check_energy_perf_cap())
|
|
enable_energy_perf_pref();
|
|
else
|
|
printk(BIOS_WARNING, "Energy Performance Preference not supported!\n");
|
|
}
|
|
}
|
|
|
|
static void post_mp_init(void)
|
|
{
|
|
/* Set Max Ratio */
|
|
cpu_set_max_ratio();
|
|
|
|
/*
|
|
* 1. Now that all APs have been relocated as well as the BSP let SMIs
|
|
* start flowing.
|
|
* 2. Skip enabling power button SMI and enable it after BS_CHIPS_INIT
|
|
* to avoid shutdown hang due to lack of init on certain IP in FSP-S.
|
|
*/
|
|
global_smi_enable_no_pwrbtn();
|
|
}
|
|
|
|
static const struct mp_ops mp_ops = {
|
|
/*
|
|
* Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
|
|
* that are set prior to ramstage.
|
|
* Real MTRRs programming are being done after resource allocation.
|
|
*/
|
|
.pre_mp_init = pre_mp_init,
|
|
.get_cpu_count = get_cpu_count,
|
|
.get_smm_info = smm_info,
|
|
.get_microcode_info = get_microcode_info,
|
|
.pre_mp_smm_init = smm_initialize,
|
|
.per_cpu_smm_trigger = per_cpu_smm_trigger,
|
|
.relocation_handler = smm_relocation_handler,
|
|
.post_mp_init = post_mp_init,
|
|
};
|
|
|
|
void soc_init_cpus(struct bus *cpu_bus)
|
|
{
|
|
/* TODO: Handle mp_init_with_smm failure? */
|
|
mp_init_with_smm(cpu_bus, &mp_ops);
|
|
|
|
/* Thermal throttle activation offset */
|
|
configure_tcc_thermal_target();
|
|
}
|
|
|
|
enum adl_cpu_type get_adl_cpu_type(void)
|
|
{
|
|
const uint16_t adl_m_mch_ids[] = {
|
|
PCI_DID_INTEL_ADL_M_ID_1,
|
|
PCI_DID_INTEL_ADL_M_ID_2,
|
|
};
|
|
const uint16_t adl_p_mch_ids[] = {
|
|
PCI_DID_INTEL_ADL_P_ID_1,
|
|
PCI_DID_INTEL_ADL_P_ID_3,
|
|
PCI_DID_INTEL_ADL_P_ID_4,
|
|
PCI_DID_INTEL_ADL_P_ID_5,
|
|
PCI_DID_INTEL_ADL_P_ID_6,
|
|
PCI_DID_INTEL_ADL_P_ID_7,
|
|
PCI_DID_INTEL_ADL_P_ID_8,
|
|
PCI_DID_INTEL_ADL_P_ID_9,
|
|
PCI_DID_INTEL_ADL_P_ID_10
|
|
};
|
|
const uint16_t adl_s_mch_ids[] = {
|
|
PCI_DID_INTEL_ADL_S_ID_1,
|
|
PCI_DID_INTEL_ADL_S_ID_2,
|
|
PCI_DID_INTEL_ADL_S_ID_3,
|
|
PCI_DID_INTEL_ADL_S_ID_4,
|
|
PCI_DID_INTEL_ADL_S_ID_5,
|
|
PCI_DID_INTEL_ADL_S_ID_6,
|
|
PCI_DID_INTEL_ADL_S_ID_7,
|
|
PCI_DID_INTEL_ADL_S_ID_8,
|
|
PCI_DID_INTEL_ADL_S_ID_9,
|
|
PCI_DID_INTEL_ADL_S_ID_10,
|
|
PCI_DID_INTEL_ADL_S_ID_11,
|
|
PCI_DID_INTEL_ADL_S_ID_12,
|
|
PCI_DID_INTEL_ADL_S_ID_13,
|
|
PCI_DID_INTEL_ADL_S_ID_14,
|
|
PCI_DID_INTEL_ADL_S_ID_15,
|
|
};
|
|
|
|
const uint16_t adl_n_mch_ids[] = {
|
|
PCI_DID_INTEL_ADL_N_ID_1,
|
|
PCI_DID_INTEL_ADL_N_ID_2,
|
|
PCI_DID_INTEL_ADL_N_ID_3,
|
|
PCI_DID_INTEL_ADL_N_ID_4,
|
|
};
|
|
|
|
const uint16_t rpl_p_mch_ids[] = {
|
|
PCI_DID_INTEL_RPL_P_ID_1,
|
|
PCI_DID_INTEL_RPL_P_ID_2,
|
|
PCI_DID_INTEL_RPL_P_ID_3,
|
|
};
|
|
|
|
const uint16_t mchid = pci_s_read_config16(PCI_DEV(0, PCI_SLOT(SA_DEVFN_ROOT),
|
|
PCI_FUNC(SA_DEVFN_ROOT)),
|
|
PCI_DEVICE_ID);
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(adl_p_mch_ids); i++) {
|
|
if (adl_p_mch_ids[i] == mchid)
|
|
return ADL_P;
|
|
}
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(adl_m_mch_ids); i++) {
|
|
if (adl_m_mch_ids[i] == mchid)
|
|
return ADL_M;
|
|
}
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(adl_s_mch_ids); i++) {
|
|
if (adl_s_mch_ids[i] == mchid)
|
|
return ADL_S;
|
|
}
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(adl_n_mch_ids); i++) {
|
|
if (adl_n_mch_ids[i] == mchid)
|
|
return ADL_N;
|
|
}
|
|
|
|
for (size_t i = 0; i < ARRAY_SIZE(rpl_p_mch_ids); i++) {
|
|
if (rpl_p_mch_ids[i] == mchid)
|
|
return RPL_P;
|
|
}
|
|
|
|
return ADL_UNKNOWN;
|
|
}
|
|
|
|
uint8_t get_supported_lpm_mask(void)
|
|
{
|
|
enum adl_cpu_type type = get_adl_cpu_type();
|
|
switch (type) {
|
|
case ADL_M: /* fallthrough */
|
|
case ADL_N:
|
|
case ADL_P:
|
|
case RPL_P:
|
|
return LPM_S0i2_0 | LPM_S0i3_0;
|
|
case ADL_S:
|
|
return LPM_S0i2_0 | LPM_S0i2_1;
|
|
default:
|
|
printk(BIOS_ERR, "Unknown ADL CPU type: %d\n", type);
|
|
return 0;
|
|
}
|
|
}
|