8fadf5aabf
These changes are according to spd_binary_optimization_volteer_v0.4 sheet. Offset Current value Updated value Analysis 1 0x10 0x11 As per SPD spec rev 1.1 5 0x19 0x21 16 bits for Row addrs, 10 bits for Column addrs 6 0x95 0xB5 4 die, 2 ch per pkg, Byte 16 signal matrix 12 0x02 0x0A 2 ranks per ch, 16 bits device data width 18 0x05 0x04 4267MHz support 29 0x90 0xC0 HW specific 30 0x06 0x68 HW specific 31 0xD0 0x60 HW specific 32 0x02 0x04 HW specific 125 0x00 0xE1 4267MHz support BUG=b:159319534 TEST=Tested multiple cold boot cycles on TGL-UP3 with QS silicon Change-Id: Ie506fbfe86a3ffb77763e8d9ef7e8aa69ea44bd3 Signed-off-by: Shreesh Chhabbi <shreesh.chhabbi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42524 Reviewed-by: Ravishankar Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-by: Shreesh Chhabbi <shreesh.chhabbi@intel.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
coreboot README
coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload.
With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required.
coreboot was formerly known as LinuxBIOS.
Payloads
After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot.
See https://www.coreboot.org/Payloads for a list of supported payloads.
Supported Hardware
coreboot supports a wide range of chipsets, devices, and mainboards.
For details please consult:
Build Requirements
- make
- gcc / g++
Because Linux distribution compilers tend to use lots of patches. coreboot
does lots of "unusual" things in its build system, some of which break due
to those patches, sometimes by gcc aborting, sometimes - and that's worse -
by generating broken object code.
Two options: use our toolchain (eg. make crosstools-i386) or enable the
ANY_TOOLCHAINKconfig option if you're feeling lucky (no support in this case). - iasl (for targets with ACPI support)
- pkg-config
- libssl-dev (openssl)
Optional:
- doxygen (for generating/viewing documentation)
- gdb (for better debugging facilities on some targets)
- ncurses (for
make menuconfigandmake nconfig) - flex and bison (for regenerating parsers)
Building coreboot
Please consult https://www.coreboot.org/Build_HOWTO for details.
Testing coreboot Without Modifying Your Hardware
If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU.
Please see https://www.coreboot.org/QEMU for details.
Website and Mailing List
Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website:
You can contact us directly on the coreboot mailing list:
https://www.coreboot.org/Mailinglist
Copyright and License
The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details.
coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details.
This makes the resulting coreboot images licensed under the GPL, version 2.