66bcc3101e
Change-Id: If1a393578556d51499c700b68187034830d19215 Signed-off-by: Daniel Maslowski <daniel.maslowski@img.ly> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Nico Huber <nico.h@gmx.de>
65 lines
2.8 KiB
Markdown
65 lines
2.8 KiB
Markdown
Display Panel Specifics
|
|
=======================
|
|
|
|
Timing Parameters
|
|
-----------------
|
|
|
|
From the binary file `edid` in the sys filesystem on Linux, the panel can be
|
|
identified. The exact path may differ slightly. Here is an example:
|
|
|
|
```sh
|
|
$ strings /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/edid
|
|
@0 5
|
|
LG Display
|
|
LP140WF3-SPD1
|
|
```
|
|
|
|
To figure out the timing parameters, refer to the [Intel Programmer's Reference
|
|
Manuals](https://01.org/linuxgraphics/documentation/hardware-specification-prms)
|
|
and try to find the datasheet of the panel using the information from `edid`.
|
|
In the example above, you would search for `LP140WF3-SPD1`. Find a table listing
|
|
the power sequence timing parameters, which are usually named T[N] and also
|
|
referenced in Intel's respective registers listing. You need the values for
|
|
`PP_ON_DELAYS`, `PP_OFF_DELAYS` and `PP_DIVISOR` for your `devicetree.cb`:
|
|
|
|
```eval_rst
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Intel docs | devicetree.cb | eDP |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Power up delay | `gpu_panel_power_up_delay` | T3 |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Power on to backlight on | `gpu_panel_power_backlight_on_delay` | T7 |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Power Down delay | `gpu_panel_power_down_delay` | T10 |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Backlight off to power down | `gpu_panel_power_backlight_off_delay` | T9 |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
| Power Cycle Delay | `gpu_panel_power_cycle_delay` | T12 |
|
|
+-----------------------------+---------------------------------------+-----+
|
|
```
|
|
|
|
Intel GPU Tools and VBT
|
|
-----------------------
|
|
|
|
The Intel GPU tools are in a package called either `intel-gpu-tools` or
|
|
`igt-gpu-tools` in most distributions of Linux-based operating systems.
|
|
In the coreboot `util/` directory, you can find `intelvbttool`.
|
|
|
|
From a running system, you can dump the register values directly:
|
|
```sh
|
|
$ intel_reg dump --all | grep PCH_PP
|
|
PCH_PP_STATUS (0x000c7200): 0x80000008
|
|
PCH_PP_CONTROL (0x000c7204): 0x00000007
|
|
PCH_PP_ON_DELAYS (0x000c7208): 0x07d00001
|
|
PCH_PP_OFF_DELAYS (0x000c720c): 0x01f40001
|
|
PCH_PP_DIVISOR (0x000c7210): 0x0004af06
|
|
```
|
|
|
|
You can obtain the timing values from a VBT (Video BIOS Table), which you can
|
|
dump from a vendor UEFI image:
|
|
```sh
|
|
$ intel_vbt_decode data.vbt | grep T3
|
|
Power Sequence: T3 2000 T7 10 T9 2000 T10 500 T12 5000
|
|
T3 optimization: no
|
|
```
|