d42ee150a0
1. There is a mis-understanding to calculate the value of TD Size in Normal TRB. For MTK's xHCI controller it defines a number of packets that remain to be transferred for a TD after processing all Max packets in all previous TRBs, that means don't include the current TRB's. 2. To minimize the scheduling effort for synchronous endpoints in xHC, the MTK architecture defines some extra SW scheduling parameters for HW. According to these parameters provided by SW, the xHC can easily decide whether a synchronous endpoint should be scheduled in a specific uFrame. The extra SW scheduling parameters are put into reserved DWs in Slot and Endpoint Context. But in coreboot synchronous transfer can be ignored, so only two fields are set to a default value 1 to support bulk and interrupt transfers, and others are set to zero. 3. For control transfer, it is better to read back doorbell register or add a memory barrier after ringing the doorbell to flush posted write. Otherwise the first command will be aborted on MTK's xHCI controller. 4. Before send commands to a port, the Port Power in PORTSC register should be set to 1 on MTK's xHCI so a hook function of enable_port in generic_hub_ops_t struct is provided. Change-Id: Ie8878b50c048907ebf939b3f6657535a54877fde Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 738609c11f16264c6e6429d478b2040cb391fe41 Original-Change-Id: Id9156892699e2e42a166c77fbf6690049abe953b Original-Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Original-Reviewed-on: https://chromium-review.googlesource.com/265362 Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Original-Commit-Queue: Yidi Lin <yidi.lin@mediatek.com> Original-Tested-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: http://review.coreboot.org/10389 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
------------------------------------------------------------------------------- coreboot README ------------------------------------------------------------------------------- coreboot is a Free Software project aimed at replacing the proprietary BIOS (firmware) found in most computers. coreboot performs a little bit of hardware initialization and then executes additional boot logic, called a payload. With the separation of hardware initialization and later boot logic, coreboot can scale from specialized applications that run directly firmware, run operating systems in flash, load custom bootloaders, or implement firmware standards, like PC BIOS services or UEFI. This allows for systems to only include the features necessary in the target application, reducing the amount of code and flash space required. coreboot was formerly known as LinuxBIOS. Payloads -------- After the basic initialization of the hardware has been performed, any desired "payload" can be started by coreboot. See http://www.coreboot.org/Payloads for a list of supported payloads. Supported Hardware ------------------ coreboot supports a wide range of chipsets, devices, and mainboards. For details please consult: * http://www.coreboot.org/Supported_Motherboards * http://www.coreboot.org/Supported_Chipsets_and_Devices Build Requirements ------------------ * gcc / g++ * make Optional: * doxygen (for generating/viewing documentation) * iasl (for targets with ACPI support) * gdb (for better debugging facilities on some targets) * ncurses (for 'make menuconfig') * flex and bison (for regenerating parsers) Building coreboot ----------------- Please consult http://www.coreboot.org/Build_HOWTO for details. Testing coreboot Without Modifying Your Hardware ------------------------------------------------ If you want to test coreboot without any risks before you really decide to use it on your hardware, you can use the QEMU system emulator to run coreboot virtually in QEMU. Please see http://www.coreboot.org/QEMU for details. Website and Mailing List ------------------------ Further details on the project, a FAQ, many HOWTOs, news, development guidelines and more can be found on the coreboot website: http://www.coreboot.org You can contact us directly on the coreboot mailing list: http://www.coreboot.org/Mailinglist Copyright and License --------------------- The copyright on coreboot is owned by quite a large number of individual developers and companies. Please check the individual source files for details. coreboot is licensed under the terms of the GNU General Public License (GPL). Some files are licensed under the "GPL (version 2, or any later version)", and some files are licensed under the "GPL, version 2". For some parts, which were derived from other projects, other (GPL-compatible) licenses may apply. Please check the individual source files for details. This makes the resulting coreboot images licensed under the GPL, version 2.