* Recently, OpensslLib [LibraryClasses] has been changed
to include RngLib which causes the SECURE_BOOT_ENABLE
build to fail in want of RngLib
* This patch adds the RngLib for OpensslLib
Signed-off-by: Divneil Rai Wadhawan <divneil.r.wadhawan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
SECURE_BOOT_ENABLE feature flag is introduced to enable Secure Boot.
The following gets enabled with this patch:
* Secure Boot Menu in "Device Manager" for enrolling keys
* Storage space for Authenticated Variables
* Authenticated execution of 3rd party images
Signed-off-by: Divneil Rai Wadhawan <divneil.r.wadhawan@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Add check for NULL HostAddress in AllocateBuffer as required by UEFI
specification.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
There is a DEBUG warning printout in VirtioMmioDeviceLib if the current
device's VendorID does not match the traditional 16-bit Red Hat PCIe
vendor ID used with virtio-pci. The virtio-mmio vendor ID is 32-bit and
has no connection to the PCIe registry.
Most specifically, this causes a bunch of noise when booting an AArch64
QEMU platform, since QEMU's virtio-mmio implementation used 'QEMU' as
the vendor ID:
VirtioMmioInit: Warning:
The VendorId (0x554D4551) does not match the VirtIo VendorId (0x1AF4).
Drop the warning message.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The BaseSerialPortLib16550 does fallback to a fixed address UART defined
by PcdSerialRegisterBase and does not initialize if it is zero. Do not
assume a serial port at 0x3F8, otherwise it could cause errors during
initialization of a non-existent serial port on non legacy platforms.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Marcello Sylvester Bauer <marcello.bauer@9elements.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
If VPD PcdNvStoreDefaultValueBuffer is used, all DynamicHii and
DynamicExHii PCD value will be generated into that VPD.
In order to generate the same VPD binary file in every build,
sort the Pcd set when generating VPD.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The following two quantities:
SecDataDir->VirtualAddress + SecDataDir->Size
SecDataDir->VirtualAddress + SecDataDir->Size - OffSet
are used multiple times in DxeImageVerificationHandler(). Introduce helper
variables for them: "SecDataDirEnd" and "SecDataDirLeft", respectively.
This saves us multiple calculations and significantly simplifies the code.
Note that all three summands above have type UINT32, therefore the new
variables are also of type UINT32.
This patch does not change behavior.
(Note that the code already handles the case when the
SecDataDir->VirtualAddress + SecDataDir->Size
UINT32 addition overflows -- namely, in that case, the certificate loop is
never entered, and the corruption check right after the loop fires.)
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Min Xu <min.m.xu@intel.com>
Cc: Wenyi Xie <xiewenyi2@huawei.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2215
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200901091221.20948-2-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Min M Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The "virsh setvcpus" (plural) command may hot-plug several VCPUs in quick
succession -- it means a series of "device_add" QEMU monitor commands,
back-to-back.
If a "device_add" occurs *just after* ACPI raises the broadcast SMI, then:
- the CPU_FOREACH() loop in QEMU's ich9_apm_ctrl_changed() cannot make the
SMI pending for the new CPU -- at that time, the new CPU doesn't even
exist yet,
- OVMF will find the new CPU however (in the CPU hotplug register block),
in QemuCpuhpCollectApicIds().
As a result, when the firmware sends an INIT-SIPI-SIPI to the new CPU in
SmbaseRelocate(), expecting it to boot into SMM (due to the pending SMI),
the new CPU instead boots straight into the post-RSM (normal mode) "pen",
skipping its initial SMI handler.
The CPU halts nicely in the pen, but its SMBASE is never relocated, and
the SMRAM message exchange with the BSP falls apart -- the BSP gets stuck
in the following loop:
//
// Wait until the hot-added CPU is just about to execute RSM.
//
while (Context->AboutToLeaveSmm == 0) {
CpuPause ();
}
because the new CPU's initial SMI handler never sets the flag to nonzero.
Fix this by sending a directed SMI to the new CPU just before sending it
the INIT-SIPI-SIPI. The various scenarios are documented in the code --
the cases affected by the patch are documented under point (2).
Note that this is not considered a security patch, as for a malicious
guest OS, the issue is not exploitable -- the symptom is a hang on the
BSP, in the above-noted loop in SmbaseRelocate(). Instead, the patch fixes
behavior for a benign guest OS.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 51a6fb4118
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2929
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200826222129.25798-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The "virsh setvcpus" (plural) command may hot-plug several VCPUs in quick
succession -- it means a series of "device_add" QEMU monitor commands,
back-to-back.
If a "device_add" occurs *just before* ACPI raises the broadcast SMI,
then:
- OVMF processes the hot-added CPU well.
- However, QEMU's post-SMI ACPI loop -- which clears the pending events
for the hot-added CPUs that were collected before raising the SMI -- is
unaware of the stray CPU. Thus, the pending event is not cleared for it.
As a result of the stuck event, at the next hot-plug, OVMF tries to re-add
(relocate for the 2nd time) the already-known CPU. At that time, the AP is
already in the normal edk2 SMM busy-wait however, so it doesn't respond to
the exchange that the BSP intends to do in SmbaseRelocate(). Thus the VM
gets stuck in SMM.
(Because of the above symptom, this is not considered a security patch; it
doesn't seem exploitable by a malicious guest OS.)
In CpuHotplugMmi(), skip the supposedly hot-added CPU if it's already
known. The post-SMI ACPI loop will clear the pending event for it this
time.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: bc498ac4ca
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2929
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200826222129.25798-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
For the implementation which utilizes libfdt provided in EmbeddedPkg
however it uses strncmp function in the libfdt helper library,
libfdt_env.h should provide the macro implied with edk2 strncmp
implementation.
The example is RISC-V OpenSBI library. edk2 RISC-V port uses OpenSBI
library and incorporate with edk2 libfdt. edk2 libfdt_env.h provides
the necessary macros to build OpenSBI which uses fdt functions in edk2
environment. However, OpenSBI also has libfdt helper library that uses
strncmp function which is not defined in edk2 libfdt_env.h. This commit
addresses the build issue caused by missing strncmp macro in
libfdt_env.h.
Check below three commits for the corresponding changes on OpenSBI,
8e47649eff2845d2d2cf2cfd2fc904
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Message-Id: <20200806023421.25161-1-abner.chang@hpe.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
[lersek@redhat.com: remove stray newline between S-o-b and first Cc]
