threading.currentThread is a deprecated alias for
threading.current_thread, and causes a warning to be displayed when it's
called. Update NmakeSubdirs.py to use the latter method instead.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Since Python3 is now required, we can remove the checks for PYTHON3_ENABLE
and PYTHON3 and simplify the code in toolsetup.bat. Also, remove the
leftover from when we supported freezing Python code.
While here, fix a couple of typos and improve error messages.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
When a MAC address matching interface is found, a RestEx child will be
created to provide the Redfish communication on that interface.
Currently, It will try to locate all RestEx binding services and choose
the first satisfied instance without taking care about current selected
interface. This might raise an issue on the system with multiple network
devices that the RestEx child was installed on wrong interface.
Signed-off-by: Minh Nguyen <minhnguyen1@os.amperecomputing.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Abner Chang <Abner.Chang@amd.com>
Clang 3.8 is a very old release and is no longer relevant. Delete the
CLANG38 toolchain from tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Clang 3.5 is a very old release and is no longer relevant. Remove the
CLANG35 toolchain from tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
As with the IA32 and X64 CLANGDWARF toolchain definitions, use ld.lld
for ARM and AARCH64.
Add -Wl,--no-pie,--no-relax to the command line to fix linking when
using lld.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a 'GCC' toolchain that's a copy of the existing GCC5 definition.
Add a 'GCCNOLTO' toolchain that's a copy of the existing GCC49
toolchain.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Update the Visual Studio toolchain descriptions in
tools_def.txt.template:
- The WinDDK is no longer needed.
- Update 3 is required for VS 2015.
- VS 2005 has been removed.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
The edk2-stable202302 release was the last to support building
EFI Byte Code drivers. Since the Intel EFI Byte Code Compiler is no
longer available, a decision has been made to remove support for EBC
from edk2.
Remove the definitions for Intel's EBC compiler from
Conf/tools_def.template.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
With recent changes, Visual Studio versions older than VS2015 are
unable to build EDK2 code.
To avoid confusion, remove VS2008, 2010, 2012 and 2013 toolchain
definitions from Conf/tools_def.template, leaving only versions that can
be used to successfully build firmware.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Oliver Smith-Denny <osd@smith-denny.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Tested-by: Michael D Kinney <michael.d.kinney@intel.com>
Older versions of GenFw put the wrong value in the debug directory size
field in the PE/COFF header: instead of putting the combined size of all
the entries, it puts the size of the only entry it creates, but adds the
size of the NB10 payload that the entry points to. This confuses the
loader now that we started using additional debug directory entries to
describe DLL characteristics.
GenFw was fixed in commit 60e85a39fe, but the binaries that were
generated with it still need to be supported.
So let's detect this condition, and check whether the size of the debug
directory is consistent with the NB10 payload: if we should expect
additional directory entries where we observe the NB10 payload, the size
field is clearly wrong, and we can break from the loop.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=4425
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Tested-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
Add a driver for the virtio serial device.
The virtio serial device also known as virtio console device because
initially it had only support for a single tty, intended to be used as
console. Support for multiple streams and named data ports has been
added later on.
The driver supports tty ports only, they are registered as SerialIo
UART in the system.
Named ports are detected and logged, but not exposed as devices. They
are usually used by guest agents to communicate with the host. It's not
clear whenever it makes sense for the firmware to run such agents and if
so which efi protocol could be to expose the ports. So leaving that for
another day.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add header files with structs and defines for the virtio serial device.
The virtio serial device also known as virtio console device because
initially it had only support for a single tty, intended to be used as
console. Support for multiple streams and named data ports has been
added later on.
https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2900003
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ArmVirtXen.dsc initializes
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString with with the
value of the variable "FIRMWARE_VER".
Move that functionality to ArmVirt.dsc.inc to make it available to all
ArmVirt packages, and make it conditional: only set the PCD string if
FIRMWARE_VER is actually defined.
This allows specifying the firmware version string on the build command
line with -D FIRMARE_VER=...
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Initialize gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString with
with the value of the variable "FIRMWARE_VER", if is is defined. Applies
to all flavors of OvmfPkg.
This behavior is already implemented in ArmVirtXen.dsc. It allows
specifying the firmware version string on the build command line with
-D FIRMARE_VER=...
Introduce a common include file to be used in the .dsc files for the
different OVMF flavors, and add the changes there. (ArmVirtPkg already
has such a file).
Signed-off-by: Oliver Steffen <osteffen@redhat.com>
The UEFI Shell is a non-active boot option, at the opposite of UiApp.
If no valid boot option is found, UiApp is selected. UiApp requires a
human interaction. When installing a new EDKII image in CIs or when
scripting is required, this is problematic.
If no valid boot option is discovered, add a path to directly go to
the UEFI Shell where the startup.nsh script is automatically executed.
The UEFI Shell is launched after connecting possible devices, but
before the reset that is meant to automatically make them visible.
The new PcdUefiShellDefaultBootEnable must be set to TRUE to enable
this behaviour. The Pcd is set to false by default.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Patrik Berglund <patrik.berglund@arm.com>
The code blindly assumes a TIS interface is present in case both CRB and
FIFO checks fail. Check the InterfaceType for TIS instead and only
return PtpInterfaceTis in case it matches, PtpInterfaceMax otherwise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The code blindly assumes a TIS interface is present in case both CRB and
FIFO checks fail. Check the InterfaceType for TIS instead and only
return Tpm2PtpInterfaceTis in case it matches, Tpm2PtpInterfaceMax
otherwise.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This is the Implementation of EDKII_REDFISH_PLATFORM_CONFIG_PROTOCOL,
which is the EDKII Redfish Platform Config driver instance that accesses
EDK2 HII configuration format and storage.
Signed-off-by: Nickle Wang <nicklew@nvidia.com>
Cc: Abner Chang <abner.chang@amd.com>
Cc: Igor Kulchytskyy <igork@ami.com>
Cc: Nick Ramirez <nramirez@nvidia.com>
Reviewed-by: Abner Chang <abner.chang@amd.com>
Reviewed-by: Igor Kulchytskyy <igork @ami.com>
