If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 36f2f049a8)
If given address is on 64K boundary and the requested bit number is 64,
all SetBits(), ClearBits() and GetBits() will encounter ASSERT problem
in trying to do a 64 bits of shift, which is not allowed by LShift() and
RShift(). This patch tries to fix this issue by turning bits operation
into whole integer operation in such situation.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 883787a2c6)
Due to the fact that HeapGuard needs CpuArchProtocol to update page
attributes, the feature is normally enabled after CpuArchProtocol is
installed. Since there're some drivers are loaded before CpuArchProtocl,
they cannot make use HeapGuard feature to detect potential issues.
This patch fixes above situation by updating the DXE core to skip the
NULL check against global gCpu in the IsMemoryTypeToGuard(), and adding
NULL check against gCpu in SetGuardPage() and UnsetGuardPage() to make
sure that they can be called but do nothing. This will allow HeapGuard to
record all guarded memory without setting the related Guard pages to not-
present.
Once the CpuArchProtocol is installed, a protocol notify will be called
to complete the work of setting Guard pages to not-present.
Please note that above changes will cause a #PF in GCD code during cleanup
of map entries, which is initiated by CpuDxe driver to update real mtrr
and paging attributes back to GCD. During that time, CpuDxe doesn't allow
GCD to update memory attributes and then any Guard page cannot be unset.
As a result, this will prevent Guarded memory from freeing during memory
map cleanup.
The solution is to avoid allocating guarded memory as memory map entries
in GCD code. It's done by setting global mOnGuarding to TRUE before memory
allocation and setting it back to FALSE afterwards in GCD function
CoreAllocateGcdMapEntry().
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 7fef06af4e)
PcdDb optimization has handled PCD DB for each SKU, not for single PCD.
So, this PCD attribute is not used any more.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit e8d2a98052)
de8373fa07 could not handle two cases.
1. For the case that the USB3 debug port instance and DMA buffers are
from PEI HOB with IOMMU enabled, it was to reallocate the DMA buffers
by AllocateAddress with the memory type accessible by SMM environment.
But reallocating the DMA buffers by AllocateAddress may fail.
2. At S3 resume, after the code is transferred to PiSmmCpuDxeSmm from
S3Resume2Pei, HOB is still needed to be used for DMA operation, but
PiSmmCpuDxeSmm has no way to get the HOB at S3 resume.
The patch is to re-support IOMMU.
For PEI, allocate granted DMA buffer from IOMMU PPI, register IOMMU PPI
notification to reinitialize hardware with granted DMA buffer if IOMMU
PPI is not present yet.
For DXE, map DMA buffer by PciIo in PciIo notification for early DXE,
and register DxeSmmReadyToLock notification to reinitialize hardware
with granted DXE DMA buffer accessible by SMM environment for late DXE.
DebugAgentLib has been managing the instance as Handle in
HOB/SystemTable. The Handle(instance) from DebugAgentLib can be used
directly in DebugCommunicationLibUsb3. Then DebugCommunicationLibUsb3
could get consistent Handle(instance) from DebugAgentLib.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 75787f6580)
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
ad6040ec9b needs to be also reverted
when reverting IOMMU support patches, otherwise there will be conflict.
This patch is to re-do ad6040ec9b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 3ecca00330)
There're two ASSERT issues which will be triggered by boot loader of
Windows 10.
The first is caused by allocating memory in heap guard during another
memory allocation, which is not allowed in DXE core. Avoiding reentry
of memory allocation has been considered in heap guard feature. But
there's a hole in the code of function FindGuardedMemoryMap(). The fix
is adding AllocMapUnit parameter in the condition of while(), which
will prevent memory allocation from happenning during Guard page
check operation.
The second is caused by the core trying to allocate page 0 with Guard
page, which will cause the start address rolling back to the end of
supported system address. According to the requirement of heap guard,
the fix is just simply skipping the free memory at page 0 and let
the core continue searching free memory after it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit dd12683e1f)
Today's implementation forgot to clear the screen to black in
SetMode(). It causes SCT SetMode() test fails.
The patch adds the clear screen operation in SetMode() to fix
the SCT failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(cherry picked from commit 81feb6d305)
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
(cherry picked from commit 58793b8838)
The ISCSI connection will fail for the first time if the target info is
retrieved from DHCP and expressed as URI format. The issue is caused by
the missing DNS protocol dependency check during the driver support
function.
This patch is to fix the above issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 841d8698dd)
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
(cherry picked from commit c8e342e00b)
It is regression bug that missing the Pcd DatumType info from DEC file
for --pcd .
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 87a1f65e80)
Move the GlobalData.BuildOptionPcd before FdfParser() function and add
type check for Pcd item.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 705ed563de)
This information is to record which device requested which DMA buffer.
It can be used for DMA buffer analysis.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 112e584ba0)
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 6bd4af305d)
Add PcdVTdPeiDmaBufferSize(S3) to replace the hard coded value
TOTAL_DMA_BUFFER_SIZE and TOTAL_DMA_BUFFER_SIZE_S3 in IntelVTdPmrPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 339cb0af96)
NULL is returned to Mapping when Operation is BusMasterCommonBuffer or
BusMasterCommonBuffer64 in PeiIoMmuMap().
So Mapping == NULL is valid when calling PeiIoMmuUnmap().
940dbd071e wrongly changed EFI_SUCCESS
to EFI_INVALID_PARAMETER when Mapping == NULL in PeiIoMmuUnmap().
This patch is to correct it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit abe63fa7dc)
if PcdDxeNxMemoryProtectionPolicy is enabled for EfiReservedMemoryType
of memory, #PF will be triggered for each APs after ExitBootServices
in SCRT test. The root cause is that AP wakeup code executed at that
time is stored in memory of type EfiReservedMemoryType (referenced by
global mReservedApLoopFunc), which is marked as non-executable.
This patch fixes this issue by setting memory of mReservedApLoopFunc to
be executable immediately after allocation.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit bc2288f59b)
