In some scenarios, the processor version may be updated dynamically
from pre-UEFI firmware during booting. But the processor version is
fixed with PCD (PcdProcessorVersion), so it can not be updated it
dynamically. This patch will support setting that value both
statically and dynamically.
Signed-off-by: Nhi Pham <nhi@os.amperecomputing.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Current implementation of looking up toolchain will _insert_ the findings
from vsvarsall.bat to existing path and potentially stuff the variable to
exceed the length of maximal path length accepted by Windows.
This change updated the logic to use the discovered shell varialbes to
replace the existing path, which is desirable in the specific use case.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Co-authored-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add support for selecting to use index or segment number as UID and name.
This allows the path of the nodes to be well known.
For example, if the PCIe node needs to be notified from by an interrupt
for a Generic Event Device
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4011
AHCI commands are retried internally which prevents platform feature
like drive password to process correctly entered password on subsequent
attempts. PCD allows the platform to determine the number of retries.
Signed-off-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Wire up the newly added UefiDriverEntrypoint in a way that ties dispatch
of the Ip4Dxe and Ip6Dxe drivers to QEMU fw_cfg variables
'opt/org.tianocore/IPv4Support' and 'opt/org.tianocore/IPv6Support'
respectively.
Setting both variables to 'n' disables IP based networking entirely,
without the need for additional code changes at the NIC driver or
network boot protocol level.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
All QEMU based OVMF platforms override the same set of network
components, to specify NULL library class resolutions that modify the
behavior of those components in a QEMU specific way.
Before adding more occurrences of that, let's drop those definitions in
a common include file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Add a new library that can be incorporated into any driver built from
source, and which permits loading of the driver to be inhibited based on
the value of a QEMU fw_cfg boolean variable. This will be used in a
subsequent patch to allow dispatch of the IPv4 and IPv6 network protocol
driver to be controlled from the QEMU command line.
This approach is based on the notion that all UEFI and DXE drivers share
a single UefiDriverEntryPoint implementation, which we can easily swap
out at build time with one that will abort execution based on the value
of some QEMU fw_cfg variable.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Don't allow spelling errors to break the CI build and inadvertently
reject pull requests - spelling is important but not that important.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This debug macro should take one argument based on the number of
print specifiers defined. However, two arguments are given.
It looks like the code may have been refactored such that the
second argument was moved to a new print and this argument was
not removed. In any case, it should not be there now.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
These debug messages are repeated in both NorFlashBlockIoReadBlocks()
and NorFlashBlockIoWriteBlocks():
"NorFlashBlockIoWriteBlocks(MediaId=0x%x, Lba=%ld, BufferSize=0x%x"
"bytes (%d kB), BufferPtr @ 0x%08x)\n"
Although this requires 5 arguments, only 4 are provided. The kilobyte
value was never given.
This change removes that specifier so the 4 arguments match the 4
specifiers in the debug macro.
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
Rebecca reports that builds of AArch64 DSCs that involve PIE linking
when using ELF based toolchains are failing in some cases, resulting in
an error message like
bad definition for symbol '_GLOBAL_OFFSET_TABLE_'@0x72d8 or
unsupported symbol type. For example, absolute and undefined symbols
are not supported.
The reason turns out to be that, while GenFw does carry some logic to
convert GOT based symbol references into direct ones (which is always
possible given that our ELF to PE/COFF conversion only supports fully
linked executables), it does not support all possible combinations of
relocations that the linker may emit to load symbol addresses from the
GOT.
In particular, when performing a non-LTO link on object code built with
GCC using -fpie, we may end up with GOT based references such as the one
below, where the address of the GOT itself is taken, and the offset of
the symbol in the GOT is reflected in the immediate offset of the
subsequent LDR instruction.
838: adrp x0, 16000
838: R_AARCH64_ADR_PREL_PG_HI21 _GLOBAL_OFFSET_TABLE_
83c: ldr x0, [x0, #2536]
83c: R_AARCH64_LD64_GOTPAGE_LO15 _gPcd_BinaryPatch_PcdFdBaseAddress
The reason that we omit GOT based symbol references when performing ELF to
PE/COFF conversion is that the GOT is not described by static ELF
relocations, which means that the ELF file lacks the metadata to
generate the PE/COFF relocations covering the GOT table in the PE/COFF
executable. Given that none of the usual motivations for using a GOT
(copy on write footprint, shared libraries) apply to EFI executables in
the first place, the easiest way around this is to convert all GOT based
symbol address loads to PC relative ADR/ADRP instructions.
So implement this handling for R_AARCH64_LD64_GOTPAGE_LO15 and
R_AARCH64_LD64_GOTOFF_LO15 relocations as well, and turn the LDR
instructions in question into ADR instructions that generate the
address immediately.
This leaves the reference to _GLOBAL_OFFSET_TABLE_ itself, which is what
generated the error to begin with. Considering that this symbol is never
referenced (i.e., it doesn't appear anywhere in the code) and is only
meaningful in combination with R_*_GOT_* based relocations that follow
it, we can just disregard any references to it entirely, given that we
convert all of those followup relocations into direct references.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Rebecca Cran <rebecca@bsdio.com>
Acked-by: Leif Lindholm <quic_llindhol@quicinc.com>
Acked-by: Bob Feng <bob.c.feng@intel.com>
Both ACPI shutdown and ACPI PM timer devices has been moved to different
port addresses in the latest version of Cloud Hypervisor. These changes
need to be reflected on the OVMF firmware.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
