REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2556
This patch uses CPUID signature check to skip reading the PlatformId MSR,
which is not implemented on AMD processors.
The PlatformId is used for loading microcode patches, which is also not
supported and AMD-based platforms. To mitigate the PlatformId dependency,
PcdCpuMicrocodePatchAddress and PcdCpuMicrodePatchRegionSize must be set
to 0 (default value), in order to bypass microcode loading code paths.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2563
This patch is to fix a incremental build regression bug
which happen when using nmake. That's introduced by 818283de3f.
If there is white space before !INCLUDE instruction, nmake will not
process it. Source code's dependent header files are listed in
${deps_file} file, if it's not included successfully, nmake will
not detect the change of those header file.
This patch has been verified in Windows with VS2015 and Linux with GCC5.
The header file add/modify/delete can trig the incremental build with this fix.
There is no impact on the clean build.
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2534
Extend validation of ACPI structure lengths which are read from the
ACPI table being parsed. Additionally check if the structure 'Length'
field value is positive. If not, stop parsing the faulting table.
Some ACPI tables define internal structures of variable size. The
'Length' field inside the substructure is used to update a pointer used
for table traversal. If the byte-length of the structure is equal to 0,
acpiview can enter an infinite loop. This condition can occur if, for
example, the zero-allocated ACPI table buffer is not fully populated.
This is typically a bug on the ACPI table writer side.
In short, this method helps acpiview recover gracefully from a
zero-valued ACPI structure length.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsSignatureFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
All intermediate results inside this function will be checked and
returned immediately upon any failure or error, like out-of-resource,
hash calculation error or certificate retrieval failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsCertHashFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
The dbx fetching code inside the while/for-loop causes code hard to
understand. Since there's no need to get dbx more than once, this patch
simplify the code logic by moving related code to be outside the while-
loop. db fetching code is also refined accordingly to reduce the indent
level of code.
More comments are also added or refined to explain more details.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
In timestamp check after the cert is found in db, the original code jumps
to 'Done' if any error happens in fetching dbx variable. At any of the
jump, VerifyStatus equals to TRUE, which means allowed-by-db. This should
not be allowed except to EFI_NOT_FOUND case (meaning dbx doesn't exist),
because it could be used to bypass timestamp check.
This patch add code to change VerifyStatus to FALSE in the case of memory
allocation failure and dbx fetching failure to avoid potential bypass
issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
Normally two times of calling gRT->GetVariable() are needed to get
the data of a variable: get the variable size by passing zero variable
size, and then allocate enough memory and pass the correct variable size
and buffer.
But in the inner loop in IsAllowedByDb(), the DbxDataSize was not
initialized to zero before calling gRT->GetVariable(). It won't cause
problem if dbx does not exist. But it will give wrong result if dbx
exists and the DbxDataSize happens to be a small enough value. In this
situation, EFI_BUFFER_TOO_SMALL will be returned. Then the result check
code followed will jump to 'Done', which is not correct because it's
actually the value expected.
if (Status == EFI_BUFFER_TOO_SMALL) {
goto Done;
}
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In case the signers' certificate stack, retrieved from the PE/COFF image's
Authenticode blob, has zero elements (=there are zero signer certificates),
then we should consider the image forbidden by DBX, not accepted by DBX.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Check if the ACPI table length, as reported in the ACPI table header, is
big enough to fit at least the header itself.
If not, report an error to the user and stop parsing the table in order
to prevent buffer overruns.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove duplicate Generic Address Structure (GAS) and ACPI table header
size definitions. Replace any dependencies with the definitions from
Acpi63.h.
AcpiParser.h redefines the size of Generic Address Structure (GAS) and
the ACPI table header. The motivation is to 'minimise any reference to
the EDK2 ACPI headers in an attempt to provide cross checking'. While
the redefined values are unlikely to change, redefinition causes
unnecessary maintenance overhead for acpiview.
In addition to this, EDK2 ACPI headers are referenced throughout the
entire project, so the assumption should be that the definitions in
these header files are correct.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Match data type and format specifier for printing.
1. Type cast ProcessorNumber and FeatureIndex to UINT32
as %d only expects a UINT32.
2. Use %08x instead of %08lx for CacheControl to print Index
as it is UINT32 type.
3. Use %016lx instead of %08lx for MemoryMapped to print
(Index | LShiftU64 (HighIndex, 32)) as it is UINT64 type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1989
The commit will avoid unmapping the same resource in error handling logic
for function BuildAdmaDescTable() and SdMmcCreateTrb().
For the error handling in BuildAdmaDescTable():
The error is directly related with the corresponding Map() operation
(mapped address beyond 4G, which is not supported in ADMA), so the Unmap()
operation is done in the error handling logic, and then setting
'Trb->AdmaMap' to NULL to avoid double Unmap.
For the error handling in SdMmcCreateTrb():
The error is not directly related with the corresponding Map() operation,
so the commit will update the code to left SdMmcFreeTrb() for the Unmap
operation to avoid double Unmap.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
This patch removes the header file added by c7c964b.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
So this patch adds a platform PPI for the microcode shadow logic, and
remove the FIT related code from EDK2.
The FIT based microcode shadow support will be implemented as a new
platform PEIM in IntelSiliconPkg in edk2-platforms.
This patch doesn't provide a DXE version shadow microcode protocol,
a platform which only uses DxeMpInitLib instance only supports PCD
based microcode shadowing.
A detailed design doc can be found here:
https://edk2.groups.io/g/devel/files/Designs/2020/0214/Support%20
the%202nd%20Microcode%20FV%20Flash%20Region.pdf
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1584
The flow of CPU feature initialization logic is:
1. BSP calls GetConfigDataFunc() for each thread/AP;
2. Each thread/AP calls SupportFunc() to detect its own capability;
3. BSP calls InitializeFunc() for each thread/AP.
There is a design gap in step #3. For a package scope feature that only
requires one thread of each package does the initialization operation,
what InitializeFunc() currently does is to do the initialization
operation only CPU physical location Core# is 0.
But in certain platform, Core#0 might be disabled in hardware level
which results the certain package scope feature isn't initialized at
all.
The patch adds a new field First to indicate the CPU's location in
its parent scope.
First.Package is set for all APs/threads under first package;
First.Core is set for all APs/threads under first core of each
package;
First.Thread is set for the AP/thread of each core.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1366
Commit b3c71b472d supported MSR setting
in different scopes. It added below macro:
CPU_FEATURE_THREAD_BEFORE
CPU_FEATURE_THREAD_AFTER
CPU_FEATURE_CORE_BEFORE
CPU_FEATURE_CORE_AFTER
CPU_FEATURE_PACKAGE_BEFORE
CPU_FEATURE_PACKAGE_AFTER
And it re-interpreted CPU_FEATURE_BEFORE as CPU_FEATURE_THREAD_BEFORE
and CPU_FEATURE_AFTER as CPU_FEATURE_THREAD_AFTER.
This patch retires CPU_FEATURE_BEFORE and CPU_FEATURE_AFTER
completely.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The Platform Communications Channel Table (PCCT) was defined in:
ACPI Specification Version 5.0, Errata A - Published Nov. 13, 2013.
Starting from the Acpi50.h header file, there are definitions
describing the table but a macro with the table's signature is missing.
This patch adds the definition of Platform Communications Channel
Table's signature to the relevant ACPI header files.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2525
SafeUint64Mult() looks for 64-bit overflows and performs
several 32-bit multiples with 64-bit results to check for
all possible overflow conditions. IA32 builds using VS20xx
with optimizations enabled are producing a reference to
the _allmull intrinsic.
The fix is to use MultU64x64() instead of '*' for
these operations. These are safe because the inputs
are guaranteed to have the upper 32-bits clear, which
means MultU64x64() can never overflow with those inputs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2142
gAdvancedFeaturePkgTokenSpaceGuid.PcdSmbiosType0BiosInformation|
{0x0}|SMBIOS_TABLE_TYPE0|0x80010000 {
<HeaderFiles>
IndustryStandard/SmBios.h
<Packages>
MdePkg/MdePkg.dec
AdvancedFeaturePkg/AdvancedFeaturePkg.dec
}
If there's a PcdStructHF or PcdStructPKGs in StructPcd,
EccTool report error,IndexError: list index out of range
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
NASM_INC contains the list of directory to include when using
the nasm assembler.
In nmake makefiles, a trailing backslash escapes the newline char
and replaces it with a space ' '. To have a literal trailing
backslash, it must be escaped with a caret '^'. This is not
necessary for GNU makefiles.
On windows platforms, for the NASM_INC macro, a caret escaping
a trailing a backslash was appended to the last included
folder regardless of the makefile type.
For instance, "/Include/" was replaced by "/Include/^\".
This is causing a build failure on windows platforms using
GNU makefiles since the caret '^' doesn't escape any chars in
GNU makefiles and is thus conserved.
"/Include^\" was replaced by "/Include\/" in nmake makefiles,
but remained "/Include/^\" in GNU makefiles.
This patch removes the caret '^' on the build using GNU makefiles.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The GenMake.py script tests the platform environment
to determine the type of makefile that needs to be
generated. If a Windows build host is detected, the
makefile generated is of Nmake type. Otherwise a
GNUmake type is generated.
Furthermore, the <TARGET>_<TAGNAME>_<ARCH>_MAKE_PATH
option in tools_def.template defines the make tool
to use.
E.g.: for VS2017 this is configured to use Nmake, cf.
*_VS2017_*_MAKE_PATH = DEF(VS2017_BIN_HOST)\nmake.exe
while for GCC5 it is setup to use GNU make.
*_GCC5_*_MAKE_PATH = DEF(GCC_HOST_PREFIX)make
This prevents using the GCC compiler toolchain on a
Windows build host.
To address this issue this patch introduces 2 factors
to determine the generated makefile output.
1. Platform -> to determine shell commands used
in makefile.
2. MakeTool -> to determine the type of makefile
that needs to be generated.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The header includes Physical Layer PCI Express Extended Capability
definitions based on section 7.7.6 of PCI Express Base Specification 5.0.
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
