We are checking different emails from the signature list. We are
going to check more. To be able to differency, add a description
field, so the error reported is clearer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
The HII pages that are part of Tcg2ConfigDxe expect the following PCDs
to be of dynamic HII type, so declare them as such.
gEfiSecurityPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2AcpiTableRev
Currently, the TPM2 ACPI table is not produced, since we do not
incorporate the Tcg2Smm module, which implements the SMI based
physical presence interface exposed to the OS.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Put the TPM2 related DXE modules together in the DSC, and add a
TPM2 support header comment while at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add edk2 platform boot manager protocol which would have platform
specific refreshes to the auto enumerated as well as NV boot options
for the platform.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch updates the microcode loader to always perform a microcode
detect and load on both BSP and AP processor. This is to fix a potential
microcode revision mismatch issue in below situation:
1. Assume there are two microcode co-exists in flash: one production
version and one debug version microcode.
2. FIT loads production microcode to BSP and all AP.
3. UefiCpuPkg loader loads debug microcode to BSP, and skip the loading
on AP.
As a result, different microcode patches are loaded to BSP and AP, and
trigger microcode mismatch error during OS boot.
BZ link: https://bugzilla.tianocore.org/show_bug.cgi?id=2431
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch removes the unnecessary alignment check on microcode patch
TotalSize introduced by commit d786a172. The TotalSize has already been
checked with 1K alignment and MAX_ADDRESS in previous code as below:
if ( (UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize) ||
((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd ||
(DataSize & 0x3) != 0 ||
(TotalSize & (SIZE_1KB - 1)) != 0 ||
TotalSize < DataSize
) {
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2434
Current code use below loops to enumerate the CPUs:
for (Index = mMaxNumberOfCpus; Index-- > 0;) {
it has no issue but not easy for the developers to read the code.
Update above code to below style,
for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
It make the developers easy to read and consistent with other
similar cases in this driver.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ray Ni to have his/her name and email address
displayed properly in the git history.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-26-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Philippe Mathieu-Daudé to have his/her name and
email address displayed properly in the git history.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-25-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Nikolai Saoukh to have his/her name and email
address displayed properly in the git history.
Cc: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Nikolai Saoukh <nms@otdel-1.org>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-24-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marvin Häuser to have his/her name and email
address displayed properly in the git history (in particular,
commit 62ec4a5e).
Cc: Marvin Häuser <Marvin.Haeuser@outlook.de>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Marvin Häuser <mhaeuser@outlook.de>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-20-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marc-André Lureau to have his/her name and email
address displayed properly in the git history.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-19-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Laszlo Ersek to have his/her name and email
address displayed properly in the git history.
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-16-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Baraneedharan Anbazhagan to have his/her name
and email address displayed properly in the git history.
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-7-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Antoine Cœur to have his/her name and email
address displayed properly in the git history.
Cc: Antoine Cœur <coeur@gmx.fr>
Reviewed-by: Antoine Cœur <coeur@gmx.fr>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-4-philmd@redhat.com>
[lersek@redhat.com: fix up valid PatchCheck.py error in Reviewed-by]
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
