Add support library to allow for customization of _OSC and slot info.
The functions in the library are unchanged,
with the exception of adding PciInfo pointer to the APIs.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for PCIe devices with UID > 0xF.
This is done by using the next value in the name so
PCI5, PC26, etc
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
SSDT tables describing an SBSA compatible serial port receive an '_HID'
value of 'ARMH0011'. This value represents a PL011 serial port.
This patch:
- Generates an 'ARMHB000' instead
- References the 'ACPI for Arm Components 1.0 - 2020' document
specifying the '_HID' values to use.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Device Tree PCI interrupt flags use the convention described at
linux/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
The 3rd cell is the flags, encoded as follows:
bits[3:0] trigger type and level flags.
1 = low-to-high edge triggered
2 = high-to-low edge triggered (invalid for SPIs)
4 = active high level-sensitive
8 = active low level-sensitive (invalid for SPIs).
Fix the incorrect code.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Currently BaseTools use 'cp' command for PcdValueInit and GenMake
process, as the command can not keep the time info of the source
file, which will cause incremental build issue in Linux system,
thus the '-p' need be added to keep the source file's attributes
in copy process.
This patch fixes this issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Yuwei Chen <yuwei.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The CM_STD_OBJ_ACPI_TABLE_INFO.AcpiTableRevision can be used to specify
the major revision number of the ACPI table that the generator must use.
Although most ACPI tables only have a major revision number, the FADT
table additionally has a minor revision number.
The FADT generator currently defaults to setting the latest supported
ACPI revision for the FADT table i.e. ACPI 6.4. This means that the minor
revision for the FADT table is always set to 4 and there is no provision
for a user to specify the minor revision to be selected.
Therefore, update CM_STD_OBJ_ACPI_TABLE_INFO to introduce a new field
MinorRevision which can be used to specify the minor revision for an
ACPI table. Also update the FADT generator to validate the supported
FADT revisions ans use the specified minor revision for the FADT table
if supported. If an unsupported minor revision is specified the FADT
generator defaults to the latest supported minor revision.
Since the CM_STD_OBJ_ACPI_TABLE_INFO.MinorRevision field is added to
the end of the structure, it should not break existing platform code.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: <pierre.gondois@arm.com>
Tested-by: Jagadeesh Ujja <Jagadeesh.Ujja@arm.com>
Updated DMAR definitions accordingly to changes in Intel(R) Virtualization
Technology for Directed I/O (VT-D) Architecture Specification ver4.0.
Added new definition of remapping structure - SIDP. The SoC Integrated
Device Property (SIDP) reporting structure identifies devices that have
special properties and that may put restrictions on how system software
must configure remapping structures that govern such devices in a platform
where remapping hardware is enabled.
Updated DRHD definition - field 'reserved' is replaced with 'Size'.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3978
Signed-off-by: Robert Kowalewski <robert.kowalewski@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Sheng Wei <w.sheng@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
The python BaseTools/Edk2ToolsBuild.py creates files in
BaseTools/BaseToolsBuild and should be ignored.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
There are two scene communicate with StandaloneMm(MM):
1 edk2 -> TF-A -> MM, communicate MM use non-secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpNsCommBufBase;
2 RAS scene: fiq -> TF-A -> MM, use secure buffer which
specify by EFI_SECURE_PARTITION_BOOT_INFO.SpShareBufBase;
For now, the second scene will failed because check buffer address.
This patch add CheckBufferAddr() to support check address for secure
buffer.
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
TF-A: TrustedFirmware-A
SPM: Secure Partition Manager(MM)
In TF-A, the name of this field is sp_shared_buf_size. This field is
the size of range for transmit data from TF-A to standaloneMM when
SPM enable.
SpPcpuSharedBufSize is pass from TF-A while StandaloneMM initialize.
So, SpPcpuSharedBufSize should be rename to SpSharedBufSize and this field
should no multiply by PayloadBootInfo->NumCpus;
Signed-off-by: Ming Huang <huangming@linux.alibaba.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The issue appears to have been introduced by:
41fb5d46 : ArmPkg/ArmGic: Use the GIC Redistributor instead of GIC Distributor for GICv3
The changes to ArmGicIsInterruptEnabled() introduced the error where the Boolean
result is assigned to Interrupts, but then the bit position check is performed
again (against the computed Boolean result instead of the interrupt mask) during
the return statement.
Fix removes erroneous test and relies on boolean test made at return.
Signed-off-by: Robbie King <robbiek@xsightlabs.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Upgrade the edk2-basetools version from 0.1.17 to 0.1.24
features and bug fixes:
1. Add FMMT Python Tool
2. Remove RVCT support
3. Fix dependency issue in PcdValueInit
4. Output the intermediate library instance when error occurs
5. Ecc: Fix grammar in Ecc error message
6. Fix the GenMake bug for .cpp source file
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Michael Kubacki <michael.kubacki@microsoft.com>
Add support process Port Speed field value of PORTSC according to
Supported Protocol Capability (define in xHCI spec 1.1)
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3914
The value of Port Speed field in PORTSC bit[10:13]
(xHCI spec 1.1 section 5.4.8) should be change to use this value to
query thru Protocol Speed ID (PSI) (xHCI spec 1.1 section 7.2.1)
in xHCI Supported Protocol Capability and return the value according
the Protocol Speed ID (PSIV) Dword.
With this mechanism may able to detect more kind of Protocol Speed
in USB3 and also compatiable with three kind of speed of USB2.
Cc: Jenny Huang <jenny.huang@intel.com>
Cc: More Shih <more.shih@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Ian Chiu <Ian.chiu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Include HardwareInfoLib classes in the IntelTdxX64.dsc for this
platform to use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
Include DxeHardwareInfoLib class in the common ArmVirt.dsc.inc so that
ArmVirt* platforms use it during build given that PciHostBridgeUtilityLib
depends on it.
Cc: Alexander Graf <graf@amazon.de>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nicolas Ojeda Leon <ncoleon@amazon.com>
A memory range can be submitted for attribute changes which is large
enough to not require a page split during the attribute update. Consider
the following scenario:
1. An attribute update removed the RW attribute on a range large enough
to not require a page split.
2. Later, an attributes update is called to re-add the RW attribute for
a subsection of that larger page which requires a split
3. The attribute update logic performs a page split, so now the parent
and child pages have matching attributes
4. Then, the attribute update logic changes the child page to have the
RW attribute.
5. The child page would then correctly have the RW attribute added but
the parent page would still have the RW attribute removed which will
cause an improper access violation.
The page being split should have loose attributes to accommodate the
above case. The split page should always have the attributes set so
the lowest level page frame determines the access rights as detailed
in 4.10.2.2 of the Intel 64 and IA-32 Architectures Software
Developer Manual. Setting the User/Supervisor attribute shouldn't
be necessary.
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Rahul Kumar <rahul1.kumar@intel.com>
Signed-off-by: Taylor Beebe <t@taylorbeebe.com>
For Arm platforms that support more that one serial port, one of the
serial port can be used for connecting debuggers such as WinDbg. There
are PCDs that allow the base address and clock rate to be specified for
this debug serial port but not its interrupt number. So add a PCD to
specify the interrupt number assigned to the serial debug port
controller.
Signed-off-by: Thomas Abraham <thomas.abraham@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
