microvm doesn't support pflash and loads the firmware via -bios,
so we can't use the separate CODE and VARS files. Remove them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jiewen Yao <Jiewen.yao@intel.com>
In current TDVF implementation all unaccepted memory passed in Hoblist
are tagged as EFI_RESOURCE_MEMORY_UNACCEPTED. They're all accepted before
they can be accessed. After accepting memory region, the Hob ResourceType
is unchanged (still be EFI_RESOURCE_MEMORY_UNACCEPTED).
TDVF Config-B skip PEI phase and it tries to find a memory region which
is the largest one below 4GB. Then this memory region will be used as the
firmware hoblist.
So we should walk thru the input hoblist and search for the memory region
with the type of EFI_RESOURCE_MEMORY_UNACCEPTED.
Because EFI_RESOURCE_MEMORY_UNACCEPTED has not been officially in PI spec.
So it cannot be defined in MdePkg/Include/Pi/PiHob.h. As a temporary
solution it is defined in Hob.c.
There is a patch-set for lazy-accept very soon. In that patch-set
EFI_RESOURCE_MEMORY_UNACCEPTED will be defined in MdeModulePkg.
Config-B: https://edk2.groups.io/g/devel/message/76367
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Min Xu <min.m.xu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
The SEV-ES bit of Fn800-001F[EAX] - Bit 3 is used for a host to
determine support for running SEV-ES guests. It should not be checked by
a guest to determine if it is running under SEV-ES. The guest should use
the SEV_STATUS MSR Bit 1 to determine if SEV-ES is enabled. This check
was not part of the original SEV-ES support and was added in
a91b700e38. Removing the check makes this code consistent with the
Linux kernel
Fixes: a91b700e38 ("Ovmf/ResetVector: Simplify and consolidate the SEV features checks")
Signed-off-by: Peter Gonda <pgonda@google.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
kvm FSB clock is 1GHz, not 100 MHz. Timings are off by factor 10.
Fix all affected build configurations. Not changed: Microvm and
Cloudhw (they have already have the correct value), and Xen (has
no fixed frequency, the PCD is configured at runtime by platform
initialization code).
Fixes: c37cbc030d ("OvmfPkg: Switch timer in build time for OvmfPkg")
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In TDX, Application Processor busy-loops on Mailbox for OS to issue
MpProtectedModeWakeupCommandWakeup command to UEFI. As the AP acking to
it, it clears the command member according to ACPI spec 6.4, 5.2.12.19
Multiprocessor Wakeup Structure: "The application processor need clear the
command to Noop(0) as the acknowledgement that the command is received."
However, AsmRelocateApMailBoxLoop wrongly clears WakeupVector. Correctly
clear command instead of WakeupVector.
Without this patch, TD guest kernel fails to boot APs.
Fixes: fae5c1464d ("OvmfPkg: Add TdxDxe driver")
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Min Xu <min.m.xu@intel.com>
The BaseMemEncryptSevLib functionality was updated to rely on the use of
the OVMF/SEV workarea to check for SEV guests. However, this area is only
updated when running the X64 OVMF build, not the hybrid Ia32/X64 build.
Base SEV support is allowed under the Ia32/X64 build, but it now fails
to boot as a result of the change.
Update the ResetVector code to check for SEV features when built for
32-bit mode, not just 64-bit mode (requiring updates to both the Ia32
and Ia32X64 fdf files).
Fixes: f1d1c337e7
Cc: Ard Biesheuvel <ardb+tianocore@kernel.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: James Bottomley <jejb@linux.ibm.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Min Xu <min.m.xu@intel.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new library class VariableFlashInfoLib that abstracts access
to variable flash information. The instance provided first attempts
to retrieve information from the Variable Flash Info HOB. If that
HOB is not present, it falls back to the PCDs defined in
MdeModulePkg.
This fall back behavior provides backward compatibility for platforms
that only provide PCDs but also allows platforms that need to
dynamically provide the information using the Variable Flash Info HOB
to do so at runtime.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3479
Adds a new GUID that is used to identify a HOB that passes variable
flash information to UEFI variable drivers in HOB consumption phases
such as DXE, Traditional MM, and Standalone MM.
This information was previously passed directly with PCDs such
as EfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase
and gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize.
However, the Standalone MM variable driver instance does not have
direct access to the PCD database. Therefore, this HOB will first
be considered as the source for variable flash information and
if platforms do not produce the HOB, reading the information from
the PCDs directly will be a backup to provide backward
compatibility.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
RVCT is obsolete and no longer used.
Remove support for it.
Signed-off-by: Rebecca Cran <quic_rcran@quicinc.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Current code follow some rules to check if the PCI device connected to a
serial port device, but some platform or hardware doesn't follow such rule.
By locating gEfiSerialIoProtocolGuid protocol, we can find the related
device path.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
A little overdesign about VisitAllPciInstances function, since there are
two call back functions. Simplify the code logic by combining the two call
back functions, and unused parameters.
Change the PROTOCOL_INSTANCE_CALLBACK to SIMPLE_PROTOCOL_INSTANCE_CALLBACK
because the former is also defined in OvmfPkg. Rename it to avoid confusion.
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3488
Current free pool routine from PiSmmCore will inspect memory guard status
for target buffer without considering pool headers. This could lead to
`IsMemoryGuarded` function to return incorrect results.
In that sense, allocating a 0 sized pool could cause an allocated buffer
directly points into a guard page, which is legal. However, trying to
free this pool will cause the routine changed in this commit to read XP
pages, which leads to page fault.
This change will inspect memory guarded with pool headers. This can avoid
errors when a pool content happens to be on a page boundary.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kuqin12@gmail.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
