There was previously a lower bound on the value of TickPeriod such that
it couldn't be less than 10 us. However, that was removed from the PI
Specification in the 1.0 errata released in 2007. From the revision
history:
"M171 Remove 10 us lower bound restriction for the TickPeriod in the
Metronome"
Update the documentation of TickPeriod in MetronomeDxe/Metronome.c to
remove mention of the lower bound.
Signed-off-by: Rebecca Cran <rebecca@quicinc.com>
Reviewed-by: Leif Lindholm <quic_llindhol@quicinc.com>
DP command should be able to parse the FPDT ACPI table and dump
the ResetEnd which was logged at the beginning of the firmware
image execution. So that DP can calculate SEC phase time duration
start from the beginning of firmware image execution.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: zhenhuay <zhenhua.yang@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Enables dependabot in this repo so we can better alerted when
dependency updates are available.
This GitHub action will automatically create pull requests and
summarize the dependency details. Because it is a pull request,
the CI system will validate the dependency update in the pull
request.
Configures dependabot for:
1. PIP module updates
2. GitHub action updates
The maintainers/reviewers of the .github directory were added as
pull request reviewers so they can be notified when the pull request
is available.
Note to Maintainers:
After this change is committed, PRs from dependabot will be
automatically created in the edk2 repo. Never set the 'push' label
directly on these PRs. If a dependency identified by dependedabot
looks like one that should be updated in the edk2 repo, then copy
the PR generated by dependabot to your personal fork and update the
commit message to follow the edk2 commit message requirements and
send as a normal code review.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Remove ASSERTs in ArmTrngLibConstructor() that prevent from
booting on DEBUG builds.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4140
Some implementations may need to keep the initial Reset code to be
separated out from rest of the code.This request is to add padding at
lower 4K region below 4 GB which will result having only few jmp
instructions and data at that region.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Duggapu Chinni B <chinni.b.duggapu@intel.com>
ArmTrngLib crashes when run in DEBUG mode due to the fact that it passed
the [truncated] GUID value to a DEBUG() print statement instead of a
pointer to the GUID which is what the %g conversion expects.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=4146
Update edk2-pytool-library to version 0.12.0 that adds support for
the environment variable PYTOOL_TEMPORARILY_IGNORE_NESTED_EDK_PACKAGES
that can be set to true to ignore nested packages instead of breaking
the build with an exception. Nested packages are not allowed by the
edk2 specifications. This environment variable allows pytools to run
with reduced functionality if nested packages are present giving
downstream consumers of edk2 that use pytools time to resolve the use
of nested packages and restore all features of pytools.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Kubacki <mikuback@linux.microsoft.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <quic_llindhol@quicinc.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
The query cpp/conditionallyuninitializedvariable was initially
enabled with the CodeQL code because work was in progress on those
changes. The results were filtered out so CodeQL passed so we could
verify the CodeQL workflow without impacting CI results.
This change allows error severity messages and substitutes that query
with two queries that do not return failures. This allows these
queries to find future problems and prepares the CodeQL workflow to
catch future failures as queries are enabled.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Fixes issues found with the cpp/wrong-type-format-argument CodeQL
rule in BaseTools.
Reference:
https://cwe.mitre.org/data/definitions/686.html
The following CodeQL errors are resolved:
1. Check failure on line 1115 in
BaseTools/Source/C/EfiRom/EfiRom.c
- This argument should be of type 'int' but is of type 'char *'.
- This argument should be of type 'int' but is of type 'signed
char *'.
2. Check failure on line 359 in
BaseTools/Source/C/GenFw/Elf32Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
3. Check failure on line 1841 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
4. Check failure on line 1871 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'unsigned int' but is of type
'unsigned long long'.
5. Check failure on line 2400 in
BaseTools/Source/C/GenFv/GenFvInternalLib.c
- This argument should be of type 'unsigned long long' but is of
type 'unsigned int'.
6. Check failure on line 1099 in
BaseTools/Source/C/GenFw/Elf64Convert.c
- This argument should be of type 'CHAR8 *' but is of type
'unsigned int'.
7. Check failure on line 1098 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
8. Check failure on line 911 in
BaseTools/Source/C/GenSec/GenSec.c
- This argument should be of type 'CHAR8 *' but is of type
'char **'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Yuwei Chen <yuwei.chen@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
This library supports a Boot Services table library implementation
that allows code dependent upon UefiBootServicesTableLib to operate
in an isolated execution environment such as within
the context of a host-based unit test framework.
The unit test should initialize the Boot Services database with any
required elements (e.g. protocols, events, handles, etc.) prior to
the services being invoked by code under test.
It is strongly recommended to clean any global databases (e.g.
protocol, event, handles, etc.) after every unit test so the tests
execute in a predictable manner from a clean state.
This library is being moved here from PrmPkg so it can be made more
generally available to other packages and improved upon for others
use.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
The EFI_RNG_PROTOCOL published by RngDxe has been updated to
implement the EFI_RNG_ALGORITHM_RAW using the Arm TRNG interface
to provide access to entropy.
Therefore, enable EFI_RNG_PROTOCOL for the Kvmtool guest/virtual
firmware.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
Add RngDxe support for Arm. This implementation uses the ArmTrngLib
to support the RawAlgorithm and doens't support the RNDR instruction.
To re-use the RngGetRNG(), RngGetInfo() and FreeAvailableAlgorithms()
functions, create Arm/AArch64 files which implement the arch specific
function GetAvailableAlgorithms(). Indeed, FEAT_RNG instruction is not
supported on Arm.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
PcdCpuRngSupportedAlgorithm should allow to identify the the algorithm
used by the RNDR CPU instruction to generate a random number.
Add a debug warning if the Pcd is not set.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
Bugzilla: 3668 (https://bugzilla.tianocore.org/show_bug.cgi?id=3668)
RawAlgorithm is used to provide access to entropy that is suitable
for cryptographic applications. Therefore, add RawAlgorithm support
that provides access to entropy using the ArmTrngLib.
Also remove unused UefiBootServicesTableLib library inclusion
and Status variable.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
RngGetBytes() relies on the RngLib. The RngLib might use the RNDR
instruction if the FEAT_RNG feature is present. RngGetInfo and
RngGetRNG both must check that RngGetBytes() is working before
advertising/using it.
To do so, allocate an array storing the available algorithms.
The Rng algorithm at the lowest index will be the default Rng
algorithm. The array is shared between RngGetInfo and RngGetRNG.
This array is allocated when the driver is loaded, and freed
when unloaded.
This patch also prevents from having PcdCpuRngSupportedAlgorithm
let to a zero GUID, but let the possibility to have no valid Rng
algorithm in such case.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
This patch:
-Update RngGetBytes() documentation to align the function
definition and declaration.
-Improve input parameter checking. Even though 'This'
it is not used, the parameter should always point to the
current EFI_RNG_PROTOCOL.
-Removes TimerLib inclusion as unused.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
RngGetInfo() is one of the 2 functions of the EFI_RNG_PROTOCOL.
RngGetInfo() is currently a mere wrapper around
ArchGetSupportedRngAlgorithms() which is implemented differently
depending on the architecture used.
RngGetInfo() does nothing more than calling
ArchGetSupportedRngAlgorithms(). So remove it, and let RngGetInfo()
be implemented differently according to the architecture.
This follows the implementation of the other function of the
EFI_RNG_PROTOCOL, RngGetRNG().
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
gEfiRngAlgorithmSp80090Ctr256Guid was used as the default algorithm
in RngGetRNG(). The commit below set the default algorithm to
PcdCpuRngSupportedAlgorithm, which is a zero GUID by default.
As the Pcd value is not defined for any platform in the edk2-platfoms
repository, assume it was an error and go back to the first version,
using gEfiRngAlgorithmSp80090Ctr256Guid.
Fixes: 4e5ecdbac8 ("SecurityPkg: Add support for RngDxe on AARCH64")
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiewen Yao <jiewen.yao@intel.com>
