de8373fa07 could not handle two cases.
1. For the case that the USB3 debug port instance and DMA buffers are
from PEI HOB with IOMMU enabled, it was to reallocate the DMA buffers
by AllocateAddress with the memory type accessible by SMM environment.
But reallocating the DMA buffers by AllocateAddress may fail.
2. At S3 resume, after the code is transferred to PiSmmCpuDxeSmm from
S3Resume2Pei, HOB is still needed to be used for DMA operation, but
PiSmmCpuDxeSmm has no way to get the HOB at S3 resume.
The patch is to re-support IOMMU.
For PEI, allocate granted DMA buffer from IOMMU PPI, register IOMMU PPI
notification to reinitialize hardware with granted DMA buffer if IOMMU
PPI is not present yet.
For DXE, map DMA buffer by PciIo in PciIo notification for early DXE,
and register DxeSmmReadyToLock notification to reinitialize hardware
with granted DXE DMA buffer accessible by SMM environment for late DXE.
DebugAgentLib has been managing the instance as Handle in
HOB/SystemTable. The Handle(instance) from DebugAgentLib can be used
directly in DebugCommunicationLibUsb3. Then DebugCommunicationLibUsb3
could get consistent Handle(instance) from DebugAgentLib.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 75787f6580)
Fix GCC build failures below.
variable 'EvtTrb' set but not used [-Werror=unused-but-set-variable]
variable 'Index' set but not used [-Werror=unused-but-set-variable]
The build failure could only be caught with -D SOURCE_DEBUG_USE_USB3
build flag.
ad6040ec9b needs to be also reverted
when reverting IOMMU support patches, otherwise there will be conflict.
This patch is to re-do ad6040ec9b.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
(cherry picked from commit 3ecca00330)
There're two ASSERT issues which will be triggered by boot loader of
Windows 10.
The first is caused by allocating memory in heap guard during another
memory allocation, which is not allowed in DXE core. Avoiding reentry
of memory allocation has been considered in heap guard feature. But
there's a hole in the code of function FindGuardedMemoryMap(). The fix
is adding AllocMapUnit parameter in the condition of while(), which
will prevent memory allocation from happenning during Guard page
check operation.
The second is caused by the core trying to allocate page 0 with Guard
page, which will cause the start address rolling back to the end of
supported system address. According to the requirement of heap guard,
the fix is just simply skipping the free memory at page 0 and let
the core continue searching free memory after it.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit dd12683e1f)
Today's implementation forgot to clear the screen to black in
SetMode(). It causes SCT SetMode() test fails.
The patch adds the clear screen operation in SetMode() to fix
the SCT failure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(cherry picked from commit 81feb6d305)
In edit or hexedit, the mouse cursor doesn't move when moving
the mouse.
The root cause is 5563281fa2
* ShellPkg/[hex]edit: use SimpleTextInEx to read console
wrongly uses WaitForEvent() to listen keyboard input.
It blocks the code execution when there is no keyboard input.
While the same function also polls the mouse move status,
the mouse movement cannot be reflected to the screen when
there is no keyboard input.
The patch fixes the issue by use CheckEvent() instead of
WaitForEvent().
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
(cherry picked from commit 58793b8838)
The ISCSI connection will fail for the first time if the target info is
retrieved from DHCP and expressed as URI format. The issue is caused by
the missing DNS protocol dependency check during the driver support
function.
This patch is to fix the above issue.
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
(cherry picked from commit 841d8698dd)
The incorrect return status was caused by the commit of 39b0867d, which
was to resolve the token status error that does not compliance with spec
definition, but it results the protocol status not compliance with spec
definition.
This patch is to resolve above issue.
Cc: Wang Fan <fan.wang@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Ye Ting <ting.ye@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wang, Fan <fan.wang@intel.com>
(cherry picked from commit c8e342e00b)
It is regression bug that missing the Pcd DatumType info from DEC file
for --pcd .
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 87a1f65e80)
Move the GlobalData.BuildOptionPcd before FdfParser() function and add
type check for Pcd item.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 705ed563de)
This information is to record which device requested which DMA buffer.
It can be used for DMA buffer analysis.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
After IOMMU is enabled in S3, original solution with SMM device
code (OpalPasswordSmm) to unlock OPAL device for S3 will not work
as the DMA operation will be aborted without granted DMA buffer.
Instead, this solution is to add OpalPasswordPei to eliminate
SMM device code, and OPAL setup UI produced by OpalPasswordDxe
will be updated to send requests (set password, update password,
and etc), and then the requests will be processed in next boot
before SmmReadyToLock, password and device info will be saved to
lock box used by OpalPasswordPei to unlock OPAL device for S3.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 112e584ba0)
With this flag, the LockBox can be restored in S3 resume only.
The LockBox can not be restored after SmmReadyToLock in normal boot
and after EndOfS3Resume in S3 resume.
It can not be set together with LOCK_BOX_ATTRIBUTE_RESTORE_IN_PLACE.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 6bd4af305d)
Add PcdVTdPeiDmaBufferSize(S3) to replace the hard coded value
TOTAL_DMA_BUFFER_SIZE and TOTAL_DMA_BUFFER_SIZE_S3 in IntelVTdPmrPei.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 339cb0af96)
NULL is returned to Mapping when Operation is BusMasterCommonBuffer or
BusMasterCommonBuffer64 in PeiIoMmuMap().
So Mapping == NULL is valid when calling PeiIoMmuUnmap().
940dbd071e wrongly changed EFI_SUCCESS
to EFI_INVALID_PARAMETER when Mapping == NULL in PeiIoMmuUnmap().
This patch is to correct it.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit abe63fa7dc)
if PcdDxeNxMemoryProtectionPolicy is enabled for EfiReservedMemoryType
of memory, #PF will be triggered for each APs after ExitBootServices
in SCRT test. The root cause is that AP wakeup code executed at that
time is stored in memory of type EfiReservedMemoryType (referenced by
global mReservedApLoopFunc), which is marked as non-executable.
This patch fixes this issue by setting memory of mReservedApLoopFunc to
be executable immediately after allocation.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit bc2288f59b)
The root cause is an unnecessary check to Size parameter in function
AdjustMemoryS(). It will cause one standalone free page (happen to have
Guard page around) in the free memory list cannot be allocated, even if
the requested memory size is less than a page.
//
// At least one more page needed for Guard page.
//
if (Size < (SizeRequested + EFI_PAGES_TO_SIZE (1))) {
return 0;
}
The following code in the same function actually covers above check
implicitly. So the fix is simply removing above check.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
(cherry picked from commit 8b13bca9b8)
Boolean values do not need to use explicit comparisons
to TRUE or FALSE.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by:Chao Zhang <chao.b.zhang@intel.com>
(cherry picked from commit 3d1872b780)
If enabled, NX memory protection feature will mark some types of active
memory as NX (non-executable), which includes the first page of the stack.
This will overwrite the attributes of the first page of the stack if the
stack guard feature is also enabled.
The solution is to override the attributes setting to the first page of
the stack by adding back the 'EFI_MEMORY_RP' attribute when the stack
guard feature is enabled.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 7db1458f75)
The commit rewrites the logic in function
InitializeDxeNxMemoryProtectionPolicy() for handling the first page
(page 0) when NULL pointer detection feature is enabled.
Instead of skip setting the page 0, the codes will now override the
attribute setting of page 0 by adding the 'EFI_MEMORY_RP' attribute.
The purpose is to make it easy for other special handling of pages
(e.g. the first page of the stack when stack guard feature is enabled).
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit a10acf0e20)
CompatibleRangeTest() contains two bugs:
1. It doesn't reject the memory above 16MB
2. it cannot handle the case when the partial or whole range of
requested memory is already tested.
The patch fixes the two bugs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 61c1742ba1)
Because terminal doesn't support shift and toggle key state,
ReadKeyStrokeEx just sets the two states to 0.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
(cherry picked from commit 66f2329446)
Within function UpdateDisplayFromHistory():
When getting a character with different attribute with the current one,
the statement to compare the character with a 'NULL' char should be:
*StringSegmentEnd != CHAR_NULL
rather than:
StringSegmentEnd != CHAR_NULL
This commit resolves this typo.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ruiyu Ni <ruiyu.ni@intel.com>
(cherry picked from commit 10dfa028f0)
Per UEFI spec, FibreEx.WWN, FibreEx.Lun, SasEx.Address, SasEx.Lun
and iSCSI.Lun are all 8-byte array with byte #0 in the left.
It means "0102030405060708" should be converted to:
UINT8[8] = {01, 02, 03, 04, 05, 06, 07, 08}
or UINT64 = {0807060504030201}
Today's implementation wrongly uses the reversed order.
The patch fixes this issue by using StrHexToBytes().
Copy this solution from MdePkg Hash version d0196be.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 27db236ac2)
If protocol string is not specified, default TCP(0) should be used.
Today's implementation wrongly sets to 1 for this case.
Copy the fix solution from MdePkg Hash version e6c80aea.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit c1d6749b0e)
when the SECTION FV_IMAGE = $(XX)/XX.Fv, the Fv file should relative to
WORKSPACE, so when we search the XX.Fv.txt file, we should search the
path relative to workspace first.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit aebe5a36b6)
For the case that the structure PCD has no value assignment in DSC,
but has value assignment in command line.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 1667eec699)
Case 1. A Pcd has no default sku setting in DSC.
Case 2. Build as Single SKU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit f832bb3466)
1. Handle the Pcd maxsize issue for the case
that the length of Pcd value from CommandLine
bigger that its maxsize
2. The Pcd value override in commandline.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit b854e2bf75)
DSC Components section support flexible PCD, and for binary driver, we
need patch this value. Update the split char ',' not ', ' because some
value may have space, while others may not have this space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yunhua Feng <yunhuax.feng@intel.com>
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(cherry picked from commit 0537f332c9)
