REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2632
Both PEI and DXE instances of the MpInitLib are using PcdLib APIs, but
none of them list the dependency of the PcdLib in INF & header files.
This commit will explicitly add such dependency in .H and .INF files.
Test done:
Library level build pass for VS2015x86 tool chain
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2654
If FV is placed in FD region, its FV image size is fixed.
When FV image size exceeds it, it will trig the build break.
To alert the developer to adjust FV image size earlier,
I request to add new checker for the the spare FV space.
When the spare FV space is less than the specified threshold,
build tool will report the error.
This checker is the optional.
It can be enabled by -D FV_SPARE_SPACE_THRESHOLD=10000.
Macro is the value of the spare space threshold size.
It can be decimal or hex format. If it is enabled,
BaseTools will check every FV with the fixed size.
If FV doesn't meet with the size requirement,
Build tool will report error message to say there is no
enough spare space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The BaseResetSystemLib instance is not suitable for OS runtime, because
its ResetShutdown() implementation calls PciRead16 (OVMF_HOSTBRIDGE_DID).
On q35, this boils down to a memory-mapped config space access -- but we
never ask the OS to map MMCONFIG for runtime.
There are at least three alternatives to approach this:
(1) Investigate "MdePkg/Library/DxeRuntimePciExpressLib", which offers
some kind of runtime mapping for MMCONFIG.
(2) Consume PciCf8Lib directly, rather than PciLib, in ResetSystemLib.
Then we'll read OVMF_HOSTBRIDGE_DID from the config space with IO port
accesses on q35 too, not just on i440fx. IO ports don't depend on page
tables.
(3) In the lib constructor, cache "mAcpiPmBaseAddress" based on
"PcdOvmfHostBridgePciDevId" (which is set by PlatformPei). Then the
host bridge type will be known at runtime without PCI config space
accesses.
This patch follows approach (3), in order to mirror AcpiTimerLib.
Notes:
* This patch is best viewed with "git show --find-copies-harder -C43".
* PCDs are not usable in the DXE_CORE, as the PCD PPI is gone, and the PCD
protocol is not available yet. (The DXE_CORE does consume ResetSystemLib
in practice, when OVMF is built with -D SOURCE_DEBUG_ENABLE.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
[lersek@redhat.com: move third Note (with repro info) to BZ comment]
Move the ResetShutdown() definition to its own file. This will help us
introduce:
- a new library instance that is not broken in runtime modules (the
current library instance is broken in runtime modules),
- another new library instance for bhyve support.
While at it, squash AcpiPmControl() into ResetShutdown(), open-coding
SuspendType=0. This is justified because we've had no other callers for
AcpiPmControl() since commit 2d9950a2bf ("OvmfPkg: remove
EnterS3WithImmediateWake () from ResetSystemLib", 2020-01-10).
Tested with the "reset -s" UEFI shell command, on both i440fx and q35.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-5-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Annotate the #include directives with the interfaces that this lib
instance needs from the included lib class headers. This will help us keep
the #include set minimal, when we move code around later.
While at it, synchronize the [LibraryClasses] section with the #include
directives -- list BaseLib.
Also #include the ResetSystemLib class header, which declares the
interfaces that this lib instance implements.
This forces us to spell out the "MdeModulePkg.dec" dependency too, under
[Packages].
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
This reverts commit e069278905.
The default value for PcdAcpiExposedTableVersions is now set to 0x20
for Aarch64 systems. Setting this PCD in ArmVirtPkg/ArmVirtQemu.dsc
is no longer necessary.
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the default value of PcdAcpiExposedTableVersions for Aarch64
platforms to 0x20. Previously, the default was set to 0x3E for all
platforms. The new value removes ACPI 1.0b compatability, which forces
the use of XSDT 64-bit pointer, as required by Arm SBBR specification.
This also resolves an error reported by acpiview command, as seen on
the RPi (see https://github.com/pftf/RPi4/issues/25).
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2665
ReportDispatcher() is called by a software module to report a status code.
The interface is generic and can be called frequently throughout the boot
under various conditions. A certain set of conditions can cause the
currently implemented algorithm for resource exhaustion to fail. A sample
scenario:
1. ReportStatusCode() is called at a TPL higher than one of the registered
status code listeners making the call to the listener deferred until
TPL is lowered.
2. Additional calls to ReportStatusCode() occur, so the data buffer
continues to expand.
3. A call to ReportStatusCode() is made from within a memory allocation
call (e.g. CoreAllocatePoolPages ()) which is protected from re-
entrancy with mPoolMemoryLock. This will cause the ReallocatePool()
call in ReportDispatcher() to fail. Because the end pointer was already
moved to account for the data size, the end pointer is now moved
beyond the buffer and invalid.
This commit saves the original end pointer value into a local variable
called "FailSafeEndPointer" which tracks a safe end pointer to revert to
in the case the allocated buffer size (CallbackEntry->EndPointer -
CallbackEntry->StatusCodeDataBuffer) is still not large enough for the
data.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1562
The current SnpDxe implementation registers its ExitBootServices event
notification function (SnpNotifyExitBootServices ()) at TPL_NOTIFY. This
function calls PxeShutdown() which issues an UNDI shutdown operation.
Ultimately, this may invoke Shutdown() in EFI_SIMPLE_NETWORK_PROTOCOL.
The UEFI specification 2.8A Table 27 "TPL Restrictions" restricts the
TPL
for Simple Network Protocol to <= TPL_CALLBACK. In addition, it has been
observed in some 3rd party UNDI drivers to cause an issue further down
the call stack if the TPL is higher than TPL_CALLBACK on invocation.
Therefore, this commit changes the TPL of SnpNotifyExitBootServices() to
TPL_CALLBACK.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Objects Encoding for FieldElements
in section '20.2.5.2 Named Objects Encoding'.
FieldElements can be one of the following:
NamedField | ReservedField | AccessField |
ExtendedAccessField | ConnectField
Some of these keywords are starting with an opcode,
allowing to identify their type.
E.g.: ReservedField := 0x00 PkgLength
This patch adds these FieldElement opcodes definitions to
the list of AML Opcode definitions.
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1548
For clang compiler, This change will make the generated image not include the
absolute file path. If so, the generated debug image can be reproduced in the
different root directory. Also, it will reduce the size of debug image size.
To do so, use __FILE_NAME__ macro to replace __FILE__. __FILE_NAME__ is
Clang-specific extension that functions similar to __FILE__ but only renders
the last path component (the filename) instead of an invocation dependent full
path to that file, and __FILE_NAME__ is introduced since clang 9.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
After remove Used parameter, below code in ResetTokens can also be
removed:
1. The RunningApCount parameter will be reset in GetFreeToken.
2. The ReleaseSpinLock should be called in ReleaseToken function,
Code in this function seems like a later fix if ReleaseToken not
Release it. We should remove code here and fix the real issue if
existed.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Today's GetFreeToken() runs at the algorithm complexity of O(n)
where n is the size of the token list.
The change introduces a new global variable FirstFreeToken and it
always points to the first free token. So the algorithm complexity
of GetFreeToken() decreases from O(n) to O(1).
The improvement matters when some SMI code uses StartupThisAP()
service for each of the AP such that the algorithm complexity
becomes O(n) * O(m) where m is the AP count.
As next steps,
1. PROCEDURE_TOKEN.Used field can be optimized out because
all tokens before FirstFreeToken should have "Used" set while all
after FirstFreeToken should have "Used" cleared.
2. ResetTokens() can be optimized to only reset tokens before
FirstFreeToken.
v2: add missing line in InitializeDataForMmMp.
v3: update copyright year to 2020.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
