Commit Graph

19 Commits

Author SHA1 Message Date
jljusten
cf5cfe8da8 OvmfPkg: sync FADT with QEMU: cleanup FLUSH_SIZE / FLUSH_STRIDE
Since WBINVD is supported, clear ignored FLUSH_SIZE and FLUSH_STRIDE.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13613 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-13 15:38:55 +00:00
jljusten
062c1cf744 OvmfPkg: sync FADT with QEMU: disable PM2 control block
Remove support for optional PM2 control block.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13612 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-13 15:38:39 +00:00
jljusten
7c9ff57b11 OvmfPkg: sync FADT with QEMU: correct SMI_CMD
- Qemu's PIIX emulation actually supports SMM and ACPI_ENABLE /
  ACPI_DISABLE.

- After enabling SMI_CMD (SMI_CMD_IO_PORT), further values to be written
  there must be synchronized with qemu: PSTATE_CNT, CST_CNT.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13611 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-13 15:38:16 +00:00
jljusten
2712ab4f54 OvmfPkg: cleanup whitespace in Facp.aslc / Platform.h
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13610 6f19259b-4bc3-4df7-8a09-765794883524
2012-08-13 15:37:50 +00:00
jljusten
cf98e61d1a OvmfPkg/AcpiTables/Dsdt.asl: report the PCI IO ranges set in FWDT
Based on SeaBIOS commit 2062f2ba by Gerd Hoffmann <kraxel@redhat.com>.

v3: comments on FWDT fields

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13576 6f19259b-4bc3-4df7-8a09-765794883524
2012-07-31 18:18:20 +00:00
jljusten
0228e59863 OvmfPkg/AcpiTables/Dsdt.asl: strip trailing whitespace
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13575 6f19259b-4bc3-4df7-8a09-765794883524
2012-07-31 18:18:11 +00:00
jljusten
253a2ea73f OvmfPkg: install an SSDT with a dynamic OperationRegion called FWDT
"FWDT" ("firmware data") is allocated as EfiReservedMemoryType, with
AllocateReservedPool(). <MdePkg/Include/Library/MemoryAllocationLib.h>
doesn't seem to provide direct access to EfiACPIReclaimMemory, but at this
point the former seems sufficient.

Based on SeaBIOS commit 2062f2ba by Gerd Hoffmann <kraxel@redhat.com>.

v3:
- coding style fixes:
  - BDAT     -> FWDT
  - __packed -> #pragma pack(1)
  - BFLD     -> FIRMWARE_DATA, PCI_WINDOW
  - Bfld     -> FwData
- Ssdt.asl: changed license to 2-clause BSDL, paraphrasing Dsdt.asl

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13573 6f19259b-4bc3-4df7-8a09-765794883524
2012-07-31 18:17:51 +00:00
jljusten
54235984ee OvmfPkg ACPI MADT: Make processor IDs zero based
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13386 6f19259b-4bc3-4df7-8a09-765794883524
2012-05-30 23:15:42 +00:00
jljusten
834d3ccda0 OvmfPkg/AcpiTables: Change the ACPI PM Base Adress to 0xb000
0xb000 is the address normally used with QEMU.

0x400 also appears to conflict with some debug I/O ports
used by QEMU.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Bei Guan <gbtju85@gmail.com>
Reviewed-by: Bei Guan <gbtju85@gmail.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13279 6f19259b-4bc3-4df7-8a09-765794883524
2012-05-04 15:02:33 +00:00
jljusten
a12c154727 OvmfPkg/AcpiTables: Set SMI ACPI Enable/Disable fields to 0
OVMF does not support SMM. Previously the port value
was set to 0. This should be enough to disable the
SMM ACPI Enable/Disable code paths, but to be
consistent we'll set these fields to 0 as well.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Bei Guan <gbtju85@gmail.com>
Reviewed-by: Bei Guan <gbtju85@gmail.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13277 6f19259b-4bc3-4df7-8a09-765794883524
2012-05-04 15:01:39 +00:00
jljusten
b2b1699910 OvmfPkg/AcpiTables: Update GPE0 block address range for QEMU
QEMU hard codes the GPE0 registers at 0xafe0.

Previously the code assumed that the GPE0 block
would move when the PM Base Address of the PIIX4
PCI device was programmed. It appears QEMU does not
emulate this behaviour of the PIIX4 PCI device.

Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Erik Bjorge <erik.c.bjorge@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Bei Guan <gbtju85@gmail.com>
Reviewed-by: Bei Guan <gbtju85@gmail.com>

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@13276 6f19259b-4bc3-4df7-8a09-765794883524
2012-05-04 15:01:24 +00:00
hhtian
56d7640a53 Update the copyright notice format
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10439 6f19259b-4bc3-4df7-8a09-765794883524
2010-04-28 12:43:04 +00:00
jljusten
a495774f69 Remove svn:executable on *.c, *.h, *.asm, *.S, *.inf and *.asl*
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10087 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 18:17:41 +00:00
klu2
3a876391d2 remove svn:executable attribute for INF file.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10086 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 17:31:45 +00:00
klu2
f579d6ca3c Clean up EFI_SPECIFICATION_VERSION and PI_SPECIFICATION_VERSION.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10074 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-25 16:37:15 +00:00
lgao4
7b202cb0f9 1. Correct File header to ## @file
2. Remove unnecessary .common] postfix on section.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@10051 6f19259b-4bc3-4df7-8a09-765794883524
2010-02-23 23:58:38 +00:00
vanjeff
4888999008 1. update AcpiTable module type to USER_DEFINED
2. added ACPITABLE rule for AcpiTable modules in fdf files.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@9039 6f19259b-4bc3-4df7-8a09-765794883524
2009-08-11 05:30:52 +00:00
jljusten
e0fab0c233 Set the SMI port in the ACPI FACP table to 0. This signals to the
ACPI Operating System that a transition from SMI to SCI mode is not
required.

git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8631 6f19259b-4bc3-4df7-8a09-765794883524
2009-06-23 18:30:44 +00:00
jljusten
49ba9447c9 Add initial version of Open Virtual Machine Firmware (OVMF) platform.
git-svn-id: https://edk2.svn.sourceforge.net/svnroot/edk2/trunk/edk2@8398 6f19259b-4bc3-4df7-8a09-765794883524
2009-05-27 21:10:18 +00:00