REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2421
Add new definitions for Fmp Capsule dependency in UEFI Spec 2.8.
1. Extend the Last Attempt Status with a value to indicate the firmware
update fails with unsatisfied dependencies.
2. Add the definition of dependency expression op-codes.
3. Add the definition of EFI_FIRMWARE_IMAGE_DEP which is an array of FMP
dependency expression op-codes.
4. Extend the EFI_FIRMWARE_IMAGE_DESCRIPTOR with a pointer to the array of
FMP dependency expression op-codes.
5. Extend the Image Attribute Definitions with IMAGE_ATTRIBUTE_DEPENDENCY
to indicate that there is and EFI_FIRMWARE_IMAGE_DEP section associated
with the image.
6. Update EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION to 4.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
#if MACRO is not good style. It should be changed to
#ifdef MACRO style or #if defined (MACRO) style.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The latest TCG PFP specification (TCG PC Client Platform Firmware Profile
Specification, Revision 1.05) added new data structure. For example,
the SPDM device measurement. This patch adds the new content.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As per the Microsoft Debug Port Table 2 (DBG2) documentation, that
can be found online, we are missing 2 serial interface types for
Arm DCC and Bcm2835 (the latter being used with the Raspberry Pi).
These same types are present in DebugPort2Table.h so add them to
SerialPortConsoleRedirectionTable.h too.
Note that we followed the same idiosyncrasies as DebugPort2Table
for naming these new macros.
Signed-off-by: Pete Batard <pete@akeo.ie>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
This is null version of RngLib which should be used with modules that
inherit an (indirect) dependency on the RngLib class, but never actually
call RngLib APIs for consuming randomness.
To be more specific, if following components or functionalities are used
in a platform, the BaseRngLibNull should *not* be used. Instead, a non-Null
version of RngLib must be used (like BaseRngLib for IA32/X64, or future
DxeRngLibRngProtocol for all ARCHs).
- HddPasswordDxe.inf
- AES, TLS (TlsDxe.inf, TlsLib.inf), RSA_OAEP, RSA_PK1
- (If BaseRngLibNull interface ASSERTed at boot time)
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Object Encoding for ExternalOp
in section '20.2.5.2 Named Objects Encoding'.
This patch adds the definition for ExternalOp to
the list of Primary Opcode definitions.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2295
The current implementation of the FileHandleGetFileName() function
assumes that the Root directory always has the FileName '\0'.
However, the only requirement the UEFI specification defines is that
a prepended '\\' must be supported to access files and folders
relative to the Root directory.
This patch removes this assumption and supports constructing valid
paths for any value of FileName for the Root Directory.
In practice, this fixes compatibility issues with File System drivers
that report '\\' as the FileName of the Root directory, which
currently is both generating an invalid path ("\\\\") and resulting
in an EFI_NOT_FOUND result from the CurrentHandle->Open() call.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The HandleProtocol() boot service takes an EFI_HANDLE, not an
(EFI_HANDLE*). Remove the bogus cast in the
InternalImageHandleToFvHandle() function.
This is a semantic cleanup; there is no change in behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
To support auto-connection, EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs to
add a new data type EfiBluetoothSmpPeerAddressList which associates
with a list of Bluetooth per address connected before.
This new data type was added in UEFI spec 2.7b.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2138
Added checks for return parameters of GetSupportedTypes
function calls in InternalHstiFindAip to improve error handling.
An issue was observed on Dell Poweredge R740, where the Dell
PERC H740P controller UEFI driver returned InfoTypesBuffer = NULL,
InfoTypesBufferCount = 0 and caused an FreePool assert.
Signed-off-by: Jayanth Raghuram <Jayanth.Raghuram@Dell.com>
Cc: Wei G Liu <Wei_G_Liu@Dell.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The patch moves all files under UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register using following detailed approaches:
1. Move UefiCpuPkg/Include/Register/Amd/ to
MdePkg/Include/Register/Amd folder.
2. Move remaining in UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register/Intel folder.
3. Create wrapper header files under UefiCpuPkg/Include/Register/
to include the accordingly files in MdePkg/Include/Register/Intel.
This is to avoid build break because code in other repos like
edk2-platform includes the file from UefiCpuPkg.
The wrapper header files will be removed after all consumers code
is updated.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
Make sure all libs that should be dynamically linked
are dynamically linked when XCODE5 compiler is used.
A previous change introduced the following pragma:
#pragma GCC visibility push (hidden)
When the EmulatorPkg is built using XCODE5 toolchain
for X64, this pragma is included and it generates a
linker error when building the Unix Host module. This
change uses !defined(__APPLE__) to prevent the use of
this pragma when building EmulatorPkg/Unix/Host.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2007
The following two PCI Capability Structure registers are updated as per
the PCI Base Specification Revision 4:-
(1) The PCI Device capability register 2(PCI_REG_PCIE_DEVICE_CAPABILITY2)
needs to be upgraded for the PCI features like -
LN system CLS (LnSystemCLS),
10b Tag completer/requester register fields
(TenBitTagCompleterSupported, TenBitTagRequesterSupported),
Emergency power reduction support and initialization requirement
(EmergencyPowerReductionSupported,
EmergencyPowerReductionInitializationRequired),
and FRS support (FrsSupported ).
(2) The PCI Device Control register 2(PCI_REG_PCIE_DEVICE_CONTROL2) needs
to be upgraded for the -
Emergency power reduction request enabling
(EmergencyPowerReductionRequest), and also the 10b Extended Tag
enabling (TenBitTagRequesterEnable).
The following two are defined as per the PCI Express Base Specification
Revision 2.1:-
(1) Defined macro definitions for all the ranges of Maximum Payload Sizes
and Maximum Read Request Sizes register fields
(2) Defined macro definitions for all the ranges of Completion Timeout
value.
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
