Memory buffer that is allocated by malloc() and realloc() will be
shifted by 8 bytes because Oniguruma keeps its memory signature. This 8
bytes shift is not handled while calling free() to release memory. Add
free() function to check Oniguruma signature before release memory
because memory buffer is not touched when using calloc().
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Per UEFI Spec 2.8 (UEFI_Spec_2_8_final.pdf, page 114)
5.2.3 Protective MBR
Table 20. Protective MBR Partition Record protecting the entire disk
The description for BootIndicator states the following:
> Set to 0x00 to indicate a non-bootable partition. If set to any
> value other than 0x00 the behavior of this flag on non-UEFI
> systems is undefined. Must be ignored by UEFI implementations.
Unfortunately, we have been incorrectly assuming that the
BootIndicator value must be 0x00, which leads to problems
when the 'pmbr_boot' flag is set on a disk containing a GPT
(such as with GNU parted). When the flag is set, the value
changes to 0x01, causing this check to fail and the system
is rendered unbootable despite it being valid from the
perspective of the UEFI spec.
To resolve this, we drop the check for the BootIndicator
so that we stop caring about the value set there, which
restores the capability to boot such disks.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3474
Cc: Chris Murphy <chrismurphy@fedoraproject.org>
Cc: David Duncan <davdunc@amazon.com>
Cc: Lazlo Ersek <lersek@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Neal Gompa <ngompa@fedoraproject.org>
Message-Id: <20210705093603.575707-1-ngompa@fedoraproject.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The payload is in ELF format per the universal payload spec.
UNIVERSAL_PAYLOAD_INFO_HEADER is stored in the ELF payload as a separate
section named ".upld_info".
Extra data needed by payload is stored in sections whose name starts
with ".upld.".
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
If HOB contains APCI table information, entry point of AcpiTableDxe.inf
should parse the APCI table from HOB, and install these tables.
We assume the whole ACPI table
(starting with EFI_ACPI_2_0_ROOT_SYSTEM_DESCRIPTION_POINTER)
is contained by a single gEfiAcpiTableGuid HOB.
If error happens when installing ACPI table, stop installing and removing
all the tables that are already added.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
The default EfiSmbiosProtocol operates on an empty SMBIOS table.
The SMBIOS tables are provided by the bootloader on UefiPayloadPkg.
Scan for existing tables in SmbiosDxe and load them if they seem valid.
This fixes the settings menu not showing any hardware information, instead
only "0 MB RAM" was displayed.
Tests showed that the OS can still see the SMBIOS tables.
SmbiosDxe will get the SMBIOS from a guid Hob.
Also will keep the SmbiosHandle if it is available.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
A NameSeg is made 4 chars.
Cf. ACPI 6.4 s20.2.2 "Name Objects Encoding":
NameSeg := <leadnamechar namechar namechar namechar>
Notice that NameSegs shorter than 4 characters are filled
with trailing underscores (‘_’s).
AML_NAME_SEG_SIZE is currently defined in:
- DynamicTablesPkg/Library/Common/AmlLib/AmlDefines.h
- MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiSdt.h
Since the value can be inferred from the ACPI specification
and to avoid multiple definitions, move it to
MdePkg/Include/IndustryStandard/
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3418
According to xhci spec, at USB packet level, a Control Transfer
consists of multiple transactions partitioned into stages: a
setup stage, an optional data stage, and a terminating status
stage. If Data Stage does not exist, the Transfer Type flag(TRT)
should be No Data Stage.
So if data length equals to 0, TRT is set to 0.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Commit a18a9bde36 ("MdeModulePkg/Variable/RuntimeDxe: Restore Variable
Lock Protocol behavior", 2020-12-15), for bug 3111, added two such sets of
debug messages that:
(a) are relevant for developers,
(b) yet should not necessarily poke end-users, because no functionality
suffers in practice.
Both message sets are in function VariableLockRequestToLock(): the first
is a generic interface deprecation warning; the second is the
double-locking situation, which we permit for compatibility (return status
EFI_SUCCESS).
Both message sets should be emitted with the DEBUG_WARN mask, not the most
serious DEBUG_ERROR mask. On some platforms, the serial console carries
both terminal traffic, and grave (DEBUG_ERROR-only) log messages. On such
platforms, both message sets may be perceived as a nuisance by end-users,
as there is nothing they can do, and there's nothing they *should* do --
in practice, nothing malfunctions.
(Such a platform is ArmVirtQemu, built with "-D
DEBUG_PRINT_ERROR_LEVEL=0x80000000".)
Cc: Bret Barkelew <bret.barkelew@microsoft.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=3410
Fixes: a18a9bde36
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20210521204037.11980-1-lersek@redhat.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Code mistake, VariableIndex is smaller normally than buffer+buffersize
so should not break loop.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3135
When Boot Menu does not exist in the BootOrder, BmRegisterBootManagerMenu
will create one into list. However, it should be put at the "end" of
BootOrder instead of "start" of BootOrder. Replace 0 by -1 to adjust
order of load options.
Signed-off-by: Walon Li <walon.li@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Instead of running StMM in SPM, OP-TEE creates a new secure partition,
which emulates SPM and isolates StMM from the rest of the Trusted
Applications (TAs). We can then compile StMM as an FD image and run it
in OP-TEE. With the addition of a new RPMB driver, we can leverage OP-TEE
and store variables to an RPMB device.
Since EDK2 upper layers expect byte addressable code, for the RPMB to
work, we need to allocate memory and sync it with the hardware on
read/writes. Since DynamicPCDs are not supported in that context we
can only use PatchablePCDs. So let's switch them to Pcd instead of
FixedPcd and accomodate the new driver. While at it, move the rest
of the variables under Pcd section, instead of FixedPcd -- this is in
line with how the variables are defined in the other Variable
modules.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Add HiiGetStringEx and leveraged by HiiGetString function to support
getting string with the best language in optionally. This avoids the
string in x-uefi language is misled to the language defined by
"PlatformLang" or the "Supported Languages". This change is introduced
to support x-uefi keyword language for configuring BIOS setting.
Signed-off-by: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Fan Wang <fan.wang@intel.com>
Signed-off-by: Abner Chang <abner.chang@hpe.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Fix the bug of terminal fifo buffer overflow with UINT8 type.
typedef struct {
UINT8 Head;
UINT8 Tail;
UINT8 Data[RAW_FIFO_MAX_NUMBER + 1];
} RAW_DATA_FIFO;
RAW_FIFO_MAX_NUMBER is 256.
the data buffer size is 257 (Index from 0 to 256), but the max value of
the index, Head or Tail (UINT8), is 255. That means the last data of the
data buffer would be always empty if we use Head/Tail to output/input the
data correctly. And because of the incorrect buffer size the FIFO full
check "((Tail + 1) % (RAW_FIFO_MAX_NUMBER + 1)) == Head" would never meet.
Signed-off-by: gechao <gechao@greatwall.com.cn>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ProcessOptionRomLight() assumes that OpRom has already been
processed in the previous full enumeration and updates
AllOpRomProcessed flag to TRUE by default. However, this may not
be applicable with other pre-stage boot firmwares.
This will update AllOpRomProcessed flag properly by checking
PciRomGetImageMapping().
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This change added support of RSC router under StandaloneMm. It replaces
SMM version ReportStatusCode protocol definitions with MM version. This
patch also switched to use gMmst instead of gSmst. Lastly, it abstracts
standalone and traditional MM driver entrypoints into separate files to
allow maximal common implementations.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of FPDT driver under StandaloneMm. It replaces
SMM version ReportStatusCode protocol with MM version. This patch also
abstracts standalone and traditional MM interfaces into separate files to
support each corresponding function prototypes and implementations.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of StandaloneMm for ReportStatusCodeLib. It
adds a new instance of ReportStatusCodeLib for MM_STANDALONE type, and
abstracts the references of gMmst and gSmst functionalities into separate
files in order to link in proper Service Table for SMM core/drivers.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This change added support of StandaloneMm for SmmLockBoxLib. It replaces
gSmst with gMmst to support both traditional MM and standalone MM. The
contructor and desctructor functions are abstracted to support different
function prototype definitions.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Kun Qin <kun.q@outlook.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3113
According to FAT specification, the length of file path
should not larger than 260. When the length exceed 260,
function FatLocateOFile will return EFI_INVALID_PARAMETER
and the parameter FileHandle will be NULL. Then on the
top-level function?an exception happens when the NULL
pointer is passed and be used.
So adding return value check after calling
LibGetFileHandleFromMenu, if return value is not success,
stop calling LibFindFiles.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
ConSplitter is using EFI_LIGHTGRAY foreground color for ConOut
and EFI_MAGENTA for StdErr consoles. This is impacting the DebugLib
output on that same serial console (e.g. DebugLibSerialPort) after
gEfiStandardErrorDeviceGuid is installed on that port. The impact
also extends to Linux serial console output in OVMF because it inherits
the color setting from the firmware.
This is inconsistent and annoying, with MAGENTA being barely legible on
a black background.
Let's change StdErr default color to LIGHTGRAY for consistency and
readability. This results in the same color being used for all consoles
sharing the same serial port (ConOut, StdErr, DebugLib, OS console).
Platforms wishing to distinguish the colors of consoles can do so in
their own Platform BDS initialization.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi 4 platform where this was another annoyance)
REF: https://github.com/pftf/RPi4/issues/115
GraphicsConsoleDxe defaults the ConOut Mode.CursorVisible to TRUE.
However, the driver never draws the cursor during init. This results
in the first call to disable the cursor (using ConOut->EnableCursor(FALSE))
to actually draw the cursor on the screen, as the logic in FlushCursor
depends on the Mode.CursorVisible state to determine if it should draw or
erase the cursor.
Fix by changing the default CursorVisible in this driver to FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Ard Biesheuvel <Ard.Biesheuvel@arm.com>
Cc: Pete Batard <pete@akeo.ie>
Signed-off-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
Tested-by: Pete Batard <pete@akeo.ie>
(On an RPi4 platform where we had this annoyance of an unwanted cursor
displaying on top of the platform logo)
