This changes is by adding 50ms delay during voltage switching from 3.3V to
1.8V, plus adding a goto Voltage33Retry for 3.3V checking and retrying.
Change is for Enabling OS boot from SD card through UEFI payload.
Signed-off-by: Aiman Rosli <muhammad.aiman.rosli@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Read Disk does a modification of ExtMbrStartingLba with the code MultU64x32
(ExtMbrStartingLba, BlockSize) Error detection to see if ExtMbrStartingLBA
has a value of 0. This is invalid as LBA 0 = MBR. After modification, the
next time ExtMbrStartingLba is in this function if ExtMbrStartingLba is set
to 0 in the MBR it never passes the while/do evaluation It is multiplied by
0 by read disk , set to 0 by an invalid MBR and goes back to evaluation
This condition will also cause Ws19 and WS22 to hang, however Microsoft has
developed a hotfix patch that will be released in 2022
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Craig Edwards <craig.edwards@dell.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before trying to access parent root port to check ARI capabilities,
enumerator should see if Endpoint device is not Root Complex integrated
to avoid undefined parent register accesses.
Signed-off-by: Damian Bassa <damian.bassa@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
gcc-11 (fedora 35):
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c: In function ?UsbIoBulkTransfer?:
/home/kraxel/projects/edk2/MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBus.c:277:12: error: ?UsbHcBulkTransfer? accessing 80 bytes in a region of size 8 [-Werror=stringop-overflow=]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
When use the UsbHcAllocMemFromBlock() and UsbHcFreeMem() to allocate
memory and free memory for the UHC, it should use the corresponding host
address but not the pci bus address.
Signed-off-by: jdzhang <jdzhang@zd-tech.com.cn>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2957
1. Allocate performance data table at EndOfDxe and then lock the varible
which store the table address at EndOfDxe.
2. Enlarge PCD gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize
from 0x20000 to 0x30000 in order to hold the Delta performance data
between EndOfDxe and ReadyToBoot.
3. SMM performance data is collected by DXE modules through SMM communication
at ReadyToBoot before.
Now to do SMM communication twice, one for allocating the performance
size at EndOfDxe, another is at ReadyToBoot to get SMM performance data.
4. Make SmmCorePerformanceLib rather than FirmwarePerformanceSmm to communicate
with DxeCorePerformanceLib for SMM performance data and size.
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Enhance RelocateCapsuleToRam() to skip creation of the Capsule on Disk
file name capsule if PcdSupportUpdateCapsuleReset feature is not enabled.
This avoids an EFI_UNSUPPORTED return status from UpdateCapsule() when the
file name capsule is encountered and PcdSupportUpdateCapsuleReset is FALSE.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Guomin Jiang <guomin.jiang@intel.com>
Signed-off-by: Bob Morgan <bobm@nvidia.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3680
This patch fixes the following issue:
The global variable gHandleList is a linked list.
This list is locked when a entry is added or removed from the list,
but there is no lock when iterating this list in function
CoreValidateHandle().
It can lead to "Handle.c (76): CR has Bad Signature" assertion if the
iterated entry in the list is just removed by other task during iterating.
Currently some caller functions of CoreValidateHandle() have
CoreAcquireProtocolLock(), but some caller functions of
CoreValidateHandle() do not CoreAcquireProtocolLock().
Add CoreAcquireProtocolLock() always when CoreValidateHandle() is called,
Also, A lock check is added in the CoreValidateHandle().
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Add correct content to the 'SdDxeExtra.uni' file.
Include 'EmmcDxeExtra.uni' and 'SdDxeExtra.uni' files to their
appropriate INF files.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=3666
Currently, CoreLocateHandleBuffer() follows three steps:
1) get the size of protocol database firstly
2) allocate the buffer based on the size
3) get the protocol database into the buffer
There is no lock protection for the whole three steps. If a new protocol
added in step 2) by other task, e.g. (event timer handle USB device
hotplug). The size of protocol database may be increased and cannot fit
into the previous buffer in step 3). The protocol database cannot be
returned successfully, EFI_BUFFER_TOO_SMALL error will be returned.
This patch adds the lock to protect the whole three steps.
It can make sure the correct protocol database be returned.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <gaoliming@byosoft.com.cn>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Hua Ma <hua.ma@intel.com>
Reviewed-by: Dandan Bi dandan.bi@intel.com
Reviewed-by: Liming Gao gaoliming@byosoft.com.cn
https://bugzilla.tianocore.org/show_bug.cgi?id=3635
Currently, in order to test the supported attributes,
the PciTestSupportedAttribute() will set the command register
to 0x27 (EFI_PCI_COMMAND_IO_SPACE, EFI_PCI_COMMAND_MEMORY_SPACE,
EFI_PCI_COMMAND_BUS_MASTER, EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) firstly,
and then read back to check whether these attributes are
set successfully in the device.
This will cause the other enabled bits
(other than EFI_PCI_COMMAND_IO_SPACE,EFI_PCI_COMMAND_MEMORY_SPACE,
EFI_PCI_COMMAND_BUS_MASTER,EFI_PCI_COMMAND_VGA_PALETTE_SNOOP)
be cleared for a short of time
This patch fixes this issue by keeping the origina
enabled bits when setting 0x27.
Signed-off-by: xueshengfeng <xueshengfeng@byosoft.com.cn>
Reviewed-by: Ray <ray.ni@intel.com>
Fix a typo of "memory" in a debug message in RamDiskProtocol.c.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This variable is needed to track the change to
BootDiscoveryPolicy variable. Boot options should
be refreshed only if BootDiscoveryPolicy has been
changed.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Samer El-Haj-Mahmoud <Samer.El-Haj-Mahmoud@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Adding two unit test case for UefiSortLib. One is a test on
sorting an array of UINT32 by using PerformQuickSort, another
is a test on comparing the same buffer by using StringCompare.
Add 'main' function name to ECC exception list to avoid ECC
error.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wenyi Xie <xiewenyi2@huawei.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This library extends Boot Maintenance Menu and allows to select
Boot Discovery Policy. When choice is made BootDiscoveryPolicy
variable is set. Platform code can use this variable to decide
which class of device shall be connected.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sunny Wang <sunny.wang@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=3483
This patch initializes the linked list RegisteredRamDisks in
RamDiskDxeEntryPoint before the registration of gEfiRamDiskProtocolGuid
with InstallMultipleProtocolInterfaces, allowing ramdisks to be created
via a callback installed with RegisterProtocolNotify as soon as the
protocol is registered.
Without this, calling RamDisk->Register() in the callback causes a crash:
ASSERT [RamDiskDxe] MdePkg/Library/BaseLib/LinkedList.c(75): List->ForwardLink != ((void *) 0)
Signed-off-by: Trammell Hudson <hudson@trmm.net>
Cc: Daniel Schaefer <daniel.schaefer@hpe.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Add OnigurumaUefiPort.h and OnigurumaUefiPort.c into ECC exception in
MdeModulePkg.ci.yaml in order to fix CI error.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Liming Gao <gaoliming@byosoft.com.cn>