REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
Introduces new changes to PeiCore to move the contents of temporary
RAM visible to the PeiCore to permanent memory. This expands on
pre-existing shadowing support in the PeiCore to perform the following
additional actions:
1. Migrate pointers in PPIs installed in PeiCore to the permanent
memory copy of PeiCore.
2. Copy all installed firmware volumes to permanent memory.
3. Relocate and fix up the PEIMs within the firmware volumes.
4. Convert all PPIs into the migrated firmware volume to the corresponding
PPI address in the permanent memory location.
This applies to PPIs and PEI notifications.
5. Convert all status code callbacks in the migrated firmware volume to
the corresponding address in the permanent memory location.
6. Update the FV HOB to the corresponding firmware volume in permanent
memory.
7. Use PcdMigrateTemporaryRamFirmwareVolumes to control if enable the
feature or not. when disable the PCD, the EvacuateTempRam() will
never be called.
The function control flow as below:
PeiCore()
DumpPpiList()
EvacuateTempRam()
ConvertPeiCorePpiPointers()
ConvertPpiPointersFv()
MigratePeimsInFv()
MigratePeim()
PeiGetPe32Data()
LoadAndRelocatePeCoffImageInPlace()
MigrateSecModulesInFv()
ConvertPpiPointersFv()
ConvertStatusCodeCallbacks()
ConvertFvHob()
RemoveFvHobsInTemporaryMemory()
DumpPpiList()
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Debkumar De <debkumar.de@intel.com>
Cc: Harry Han <harry.han@intel.com>
Cc: Catharine West <catharine.west@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1614
The security researcher found that we can get control after NEM disable.
The reason is that the flash content reside in NEM at startup and the
code will get the content from flash directly after disable NEM.
To avoid this vulnerability, the feature will copy the PEIMs from
temporary memory to permanent memory and only execute the code in
permanent memory.
The vulnerability is exist in physical platform and haven't report in
virtual platform, so the virtual can disable the feature currently.
When enable the PcdMigrateTemporaryRamFirmwareVolumes, always shadow
all PEIMs no matter the condition of PcdShadowPeimOnBoot or
PcdShadowPeimOnS3Boot.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1004
Being a compiler builtin, the type of __builtin_return_address is
already known to the compiler so no prototype is needed. Clang also
errors out when redeclaring certain builtins like this[1], though
currently only for ones with custom type checking. At the moment,
__builtin_return_address does not use custom type checking and so does
not trigger this error, however, the CHERI fork of LLVM, which will form
the basis of the toolchain for Arm's experimental Morello platform, does
use custom type checking for it, and so gives an error. Thus, simply
delete the unnecessary line.
[1] llvm/llvm-project@41af971375
Cc: Leif Lindholm <leif@nuviainc.com>
Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Upgrade openssl to 1.1.1g. the directory have been reorganized,
openssl moved crypto/include/internal to include/crypto folder.
So we change directory to match the re-organization.
The dso_conf.h and opensslconf.h will generated in UNIX format,
change process_files.pl to covent the EOL automatically.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2827
Fix a bug about parse the macro value which use another macro.
Use the following example to verify:
[Define]
DEFINE M1 = V1
DEFINE M2 = $(M1)/V2
!include $(M2)/pcd.dsc
The old code will failed parse M2 and cause following error:
Traceback (most recent call last):
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 1550, in <module>
sys.exit(Main())
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 1513, in Main
if GenCfgOpt.ParseDscFile(DscFile, FvDir) != 0:
File "Edk2\IntelFsp2Pkg\Tools\GenCfgOpt.py", line 533, in ParseDscFile
NewDscLines = IncludeDsc.readlines()
ValueError: I/O operation on closed file.
The tool should support the value use another macro, and expand it.
Cc: Chasel Chiu <chasel.chiu@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Ming Tan <ming.tan@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
The following command line:
build -b NOOPT -a IA32 -t VS2017 -p edk2\EmbeddedPkg\EmbeddedPkg.dsc
Generates the following error:
MmcDxe.lib(Diagnostics.obj) : error LNK2001:
unresolved external symbol __allshl
MmcDxe.lib(Diagnostics.obj) : error LNK2001:
unresolved external symbol __aullshr
MmcDxe.lib(MmcBlockIo.obj) : error LNK2001:
unresolved external symbol __allmul
These erros are due to the use of shift/multiply operations
on UINT64 variable on a IA32 architecture.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
UnicodeStrToAsciiStrS requires that the source string is shorter than
the destination buffer and will ASSERT if this is not true. Switch to
UnicodeStrnToAsciiStrS as there are cases where the source string is
longer than the buffer allocated for the device path.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
During build, the meta files are not changed, so it's no need
to check file timestamp.
This patch is to remove useless logic.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ReadMe.txt contained outdated information. Update it to match current
functionality (e.g. sqlite3 is no longer used), and convert the
formatting from ad-hoc to reStructuredText.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GCC48_ALL_CC_FLAGS has no dependency on GCC_ALL_CC_FLAGS.
By definition, there should be such dependency.
The outcomes of this patch is that GCC48_ALL_CC_FLAGS and
other dependent configurations will inherit from the
additional "-Os" flag.
The "-Os" flag optimizes a build in size, not breaking any
build. In a gcc command line, the last optimization flag
has precedence. This means that this "-Os" flag will be
overriden by a more specific optimization configuration,
provided that this more specific flag is appended at the
end of the CC_FLAGS.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Suggested-by: Tomas Pilar <Tomas.Pilar@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
By default, gcc allows void* pointer arithmetic.
This is a GCC extension.
However:
- the C reference manual states that void*
pointer "cannot be operands of addition
or subtraction operators". Cf s5.3.1
"Generic Pointers";
- Visual studio compiler treat such operation as
an error.
To prevent such pointer arithmetic, the "-Wpointer-arith"
flag should be set for all GCC versions.
The "-Wpointer-arith" allows to:
"Warn about anything that depends on the "size of"
a function type or of void. GNU C assigns these
types a size of 1, for convenience in calculations
with void * pointers and pointers to functions."
This flag is available since GCC2.95.3 which came out in 2001.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng<bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2818
For better memory management, re-ordered the DestroyRamDisk and
ReportStatusCode calls inside the EfiBootManagerBoot() function.
This will help to clean the unused memory before reporting the
failure status, so that OEMs can use RSC Listener to launch
custom boot option or application for recovering the failed
hard drive.
This change will help to ensure that the allocated pool of memory
for the failed boot option is freed before executing OEM's RSC
listener callback to handle every boot option failure.
Signed-off-by: KrishnadasX Veliyathuparambil Prakashan <krishnadasx.veliyathuparambil.prakashan@intel.com>
Cc: "Gao, Zhichao" <zhichao.gao@intel.com>
Cc: "Ni, Ray" <ray.ni@intel.com>
Reviewed-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
This is the second part of LsiScsiPassThru(). LsiScsiProcessRequest() is
added to translate the SCSI Request Packet into the LSI 53C895A
commands. This function utilizes the so-called Script buffer to transmit
a series of commands to the chip and then polls the DMA Status (DSTAT)
register until the Scripts Interrupt Instruction Received (SIR) bit
sets. Once the script is done, the SCSI Request Packet will be modified
to reflect the result of the script. The Cumulative SCSI Byte Count
(CSBC) register is fetched before and after the script to calculate the
transferred bytes and update InTransferLength/OutTransferLength if
necessary.
v3:
- Set DStat, SIst0, and SIst1 to 0 before using them
- Amend the if statements for the DMA data instruction and add the
assertions for the data direction
- Also set SenseDataLength to 0 on the error path
- Fix typos and amend comments
- Amend the error handling of the calculation of transferred bytes
v2:
- Use the BITx macros for the most of LSI_* constants
- Fix a typo: contorller => controller
- Add SeaBIOS lsi-scsi driver as one of the references of the script
- Cast the result of sizeof to UINT32 for the instructions of the
script
- Drop the backslashes
- Replace LSI_SCSI_DMA_ADDR_LOW with LSI_SCSI_DMA_ADDR since we
already removed DUAL_ADDRESS_CYCLE
- Add more comments for the script
- Fix the check of the script size at the end of the script
- Always set SenseDataLength to 0 to avoid the caller to access
SenseData
- Improve the error handling in LsiScsiProcessRequest()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-11-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Open PciIo protocol and use it to initialize the device. The
initialization of LSI 53C895A is simple: just set the SRST bit in
Interrupt Status Zero register to reset the device.
v2:
- Use the BITx macros for the bit constants
- Add the closing of PciIo protocol in LsiScsiControllerStop()
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-8-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement LsiScsiGetNextTargetLun(), LsiScsiBuildDevicePath(),
LsiScsiGetTargetLun(), and LsiScsiGetNextTarget() to report Targets and
LUNs and build the device path.
This commit also introduces two PCD value: PcdLsiScsiMaxTargetLimit and
PcdLsiScsiMaxLunLimit as the limits for Targets and LUNs.
v3:
- Update the range of LUN in the assertioin
- Squash the spurious newline into the previous commit
v2:
- Zero out (*Target) in LsiScsiGetTargetLun()
- Use CopyMem() instead of the one-byte shortcut to copy target from
ScsiDevicePath->Pun
- Add asserts for PcdLsiScsiMaxTargetLimit and PcdLsiScsiMaxLunLimit
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20200717061130.8881-7-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Partially implement LsiScsiControllerStart() and LsiScsiControllerStop()
to insert the scaffolding of EXT_SCSI_PASS_THRU functions.
v3: Squash the newline below the declaration of LSI_SCSI_FROM_PASS_THRU
v2: Remove the closing of PciIo protocol from LsiScsiControllerStop().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200717061130.8881-6-glin@suse.com>
Original code GetFmpImageDescriptors for OriginalFmpImageInfoBuf
pointer, if failed, return a NULL pointer. The OriginalFmpImageInfoBuf
should not be NULL and the NULL pointer dereference case
should be false positive.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Vin Xue <vinxue@outlook.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
