Gary reports the GCC 10 will emit calls to atomics intrinsics routines
unless -mno-outline-atomics is specified. This means GCC-10 introduces
new intrinsics, and even though it would be possible to work around this
by specifying the command line option, this would require a new GCC10
toolchain profile to be created, which we prefer to avoid.
So instead, add the new intrinsics to our library so they are provided
when necessary.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Dating back to commits f5cb376703 and ddd34a8183, the
"ArmVirtPkg/ArmVirtQemu.dsc" platform includes the
"OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf" module when the TPM2_ENABLE
build flag is defined.
This was regressed in commit 8923699291, which added a Tpm12DeviceLib
dependency to Tcg2ConfigPei. "ArmVirtQemu.dsc" does not resolve that class
to any instance, so now we get a build failure:
> build.py...
> ArmVirtPkg/ArmVirtQemu.dsc(...): error 4000: Instance of library class
> [Tpm12DeviceLib] is not found
> in [OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf] [AARCH64]
> consumed by module [OvmfPkg/Tcg/Tcg2Config/Tcg2ConfigPei.inf]
The TPM-1.2 code in OvmfPkg/Tcg2ConfigPei is limited to a special use case
(a kind of physical TPM-1.2 assignment), and that has never applied to
"ArmVirtQemu.dsc".
Short-circuit the TPM-1.2 detection in the ARM/AARCH64 builds of
OvmfPkg/Tcg2ConfigPei, removing the Tpm12DeviceLib dependency.
Functionally, this patch is a no-op on IA32 / X64.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Eric Auger <eric.auger@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Simon Hardy <simon.hardy@itdev.co.uk>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2728
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200520225841.17793-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add bitmask to structure which gives a binary-inspectable mechanism to
determine if a capsule contains an authentication section or depex section.
(UEFI 2.8 errata a, mantis 2026)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Define Guid & data structure for EFI_RT_PROPERTIES_TABLE, designed
to be published by a platform if it no longer supports all EFI
runtime services once ExitBootServices() has been called by the OS.
(UEFI 2.8 errata a, mantis 2049)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Some OUT parameters in the specification were mistakenly marked as IN OUT.
"IN OUT" replaced with "OUT" in the following interfaces
EFI_BOOT_SERVICES.GetMemoryMap():MemoryMap
EFI_BOOT_SERVICES.LocateHandleBuffer():NoHandles
EFI_SIMPLE_POINTER_PROTOCOL.GetState():State
EFI_ABSOLUTE_POINTER_PROTOCOL.GetState():State
EFI_EDID_OVERRIDE_PROTOCOL.GetEdid():EdidSize and Edid
EFI_ATA_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_NVM_EXPRESS_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_SD_MMC_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_EXT_SCSI_PASS_THRU_PROTOCOL.BuildDevicePath():DevicePath
EFI_FIRMWARE_MANAGEMENT_PROTOCOL.GetImage():Image
(UEFI 2.8 errata a, mantis 2035)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Any new OVMF binary (containing commit d42fdd6f83, and built with
SMM_REQUIRE) is likely to reboot during its first boot, regardless of
whether the variable store is logically empty, or it contains a
MemoryTypeInformation variable from an earlier OVMF binary.
This "reboot on first boot after OVMF upgrade" occurs despite having
eliminated BS Code/Data tracking in earlier parts of this series. Meaning
that we've outgrown the bins of those memory types too that matter for SMM
security.
Eliminating said reboot will make an upgrade to edk2-stable202005 more
comfortable for users. Increase the defaults empirically. (The total
doesn't exceed 3MB by much.)
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2706
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200508121651.16045-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
The previous patch has no effect -- i.e., it cannot stop the tracking of
BS Code/Data in MemTypeInfo -- if the virtual machine already has a
MemoryTypeInformation UEFI variable.
In that case, our current logic allows the DXE IPL PEIM to translate the
UEFI variable to the HOB, and that translation is verbatim. If the
variable already contains records for BS Code/Data, the issues listed in
the previous patch persist for the virtual machine.
For this reason, *always* install PlatformPei's own MemTypeInfo HOB. This
prevents the DXE IPL PEIM's variable-to-HOB translation.
In PlatformPei, consume the records in the MemoryTypeInformation UEFI
variable as hints:
- Ignore all memory types for which we wouldn't by default install records
in the HOB. This hides BS Code/Data from any existent
MemoryTypeInformation variable.
- For the memory types that our defaults cover, enable the records in the
UEFI variable to increase (and *only* to increase) the page counts.
This lets the MemoryTypeInformation UEFI variable function as designed,
but it eliminates a reboot when such a new OVMF binary is deployed (a)
that has higher memory consumption than tracked by the virtual machine's
UEFI variable previously, *but* (b) whose defaults also reflect those
higher page counts.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2706
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200508121651.16045-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Intel SDM introduces 6-levels for describing the CPU topology:
* Package
* Module
* Tile
* Die
* Core
* Thread
A PI spec ECR was submitted to enhance CPU_MP PPI/Protocol to
support returning such information through GetProcessorInfo().
An accordingly change was implemented and pushed to edk2-staging.
Now the PI spec has been published.
The patch is cherry-picked from edk2-staging to edk2.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Added EXTENDED_PROCESSOR_INFORMATION structure and supporting
structures and definitions. The intent is to support updated
topology layout for CPUs. (PI 1.7a Mantis 2071)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Created new header file for the new EFI_DELAYED_DISPATCH_PPI PPI
(PI 1.7 Mantis 1891)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Revision number defines and MACROs were incorrect for the current
version of the Specification (PI 1.7 Mantis 1892)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Updated PiStatusCodes to reflect changes to PI 1.7 Specification
(PI 1.7 Mantis 1889)
Signed-off-by: Robert Phelps <robert@ami.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2696
* This library class provides platform specific services to support
dependency check during updating firmware image. Platform can perform
dependency check in platform specific manner by implementing its own
FmpDependencyCheckLib.
* Add FmpDependencyCheck instance to provide a sample of dependency
check. The sample instance only checks the dependency from capsule
image. The dependency from other FMP instances isn't checked here.
* Add NULL instance as an option to skip the dependency check.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Added Guids and structures, that defines the work flow to perform
capsule update using JSON objects.
(UEFI 2.8 mantis 1935)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Provided a mechanism for UEFI FW to identify and hand off bootable
NVDIMM namespaces to the OS by standardizing the EFI device path.
EFI device path for physical NVDIMM devices changed from an ACPI
_ADR device to an ACPI NVDIMM device for correctness.
(UEFI 2.8 mantis 1858)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
New ClassGuid EFI_HII_REST_STYLE_FORMSET_GUID is defined.
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
In question level, a new flag EFI_IFR_FLAG_REST_STYLE is defined.
(UEFI 2.8 mantis 1853)
Signed-off-by: Oleksiy Yakovlev <oleksiyy@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
OVMF booting stops with the assert if built with Xcode on macOS:
Loading driver at 0x0001FAB8000 EntryPoint=0x0001FABF249 LinuxInitrdDynamicShellCommand.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 1F218398
ProtectUefiImageCommon - 0x1F218140
- 0x000000001FAB8000 - 0x0000000000008A60
ASSERT_EFI_ERROR (Status = Unsupported)
ASSERT LinuxInitrdDynamicShellCommand.c(378): !EFI_ERROR (Status)
The assert comes from InitializeHiiPackage() after an attempt to
retrieve HII package list from ImageHandle.
Xcode still doesn't support HII resource section and
LinuxInitrdDynamicShellCommand depends on it. Likewise 277a3958d9
("OvmfPkg: Don't include TftpDynamicCommand in XCODE5 tool chain"),
disable initrd command if built with Xcode toolchain
Fixes: ec41733cfd ("OvmfPkg: add the 'initrd' dynamic shell command")
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Message-Id: <20200514134820.62047-1-r.bolshakov@yadro.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
OnigurumaIntrinsics.c is now not used. So the implement of function
'memcpy' is now not., which causes build failure with CLANG9 and
XCODE. I remove OnigurumaIntrinsics.c and move the necessary function
implement to OnigurumaUefiPort.c/h.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2698
To enhance FSP silicon initialization flexibility an optional
Multi-Phase API is introduced and FSP header needs update for
new API offset. Also new SecCore module created for
FspMultiPhaseSiInit API
New ARCH_UPD introduced for enhancing FSP debug message
flexibility now bootloader can pass its own debug handler
function pointer and FSP will call the function to handle
debug message.
To support calling bootloader functions, a FspGlobalData field
added to indicate if FSP needs to switch stack when FSP running
on separate stack from bootloader.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Update the reference to MM communicate to refer to the MM communicate 2
protocol instead. This makes no difference for the MM side of the
implementation, but is more accurate nonetheless, since the original MM
protocol does not work in combination with standalone MM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Implement the new MmCommunication2 protocol which supports the use
of standalone MM at runtime inside an address space that has been
virtually remapped by the OS.
Note that the implementation of the old MM Communicate protocol is
removed: it never worked correctly so there is no point in keeping it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The MM communicate 2 protocol was introduced to factor out the mismatch
between traditional MM, which requires the physical address of the MM
buffer to be passed, and standalone MM, which copies the MM communicate
buffer data into a separate buffer, requiring the virtual address. For
this reason, MM communicate 2 carries both addresses, allowing the
implementation to decide which address it needs.
This hides this implementation detail from the callers of the protocol,
which simply passes both addresses without having to reason about what the
implementation of the protocol actually needs.
Note that the old version of the protocol is retained, in order to support
existing implementations that don't require this flexibility.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Add the protocol definition of the MM communicate 2 protocol,
which has been introduced by version 1.7 errata A of the PI spec.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
GetMaintainer.py already extracts the value of any S: tags for sections,
but it doesn't do anything with that information.
Print a warning message, with the status, for each matching section with
a status explicitly set to anything other than 'Supported' or
'Maintained'.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Allow users who didn't clone one of the TianoCore repos from a
canonical URL to specify the name of the repo (edk2, edk2-platforms
or edk2-non-osi) when running SetupGit.py to allow them to configure
their repo properly.
The new option is:
-n repo, --name repo set the repo name to configure for, if not
detected automatically
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
For Arm-based platforms, count the instances of installed tables for
each ACPI table listed as 'mandatory' in any Server Base Boot
Requirements (SBBR) specification.
Validate that the all the mandatory SBBR tables present. Report an error
for each missing table.
This new feature is optional and can be enabled with the -r command line
parameter.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For Arm-based platforms, define and implement an interface for Server
Base Boot Requirements (SBBR) compliance checks. The library is
responsible for validating that all mandatory ACPI tables are installed
on the platform.
Internally, the library maintains a data structure which tracks
instance counts for ACPI tables which are labeled as 'mandatory' in any
SBBR specification version. The provided interface allows:
- resetting all instance counts to 0
- incremementing the instance count for a table with a given signature
- validating the instance counts against the requirements in SBBR
The ACPI table requirements for each SBBR spec version are represented
internally as a list of table signatures.
Every missing mandatory table (for the input SBBR version) is reported
to the user as a separate error. If all requirements are met, an info
message is displayed.
Reference(s):
- Arm Server Base Boot Requirements 1.2, September 2019
- Arm Server Base Boot Requirements 1.1, May 2018
- Arm Server Base Boot Requirements 1.0, March 2016
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Define a new command line parameter '-r' to enable checking if all
mandatory ACPI tables listed in a specification are present.
The -r parameter takes an integer value to specify which specification
the validation should be performed against.
The parameter is used to set two Acpiview variables. An interface to
access these variables is implemented in this patch.
The new functionality is aimed at Arm-based platforms, however,
there are no restriction on extending it to other architectures.
For the 32-bit and 64-bit Arm architectures, the possible values for
the -r parameter are:
0: Arm Server Base Boot Requirements 1.0, March 2016
1: Arm Server Base Boot Requirements 1.1, May 2018
2: Arm Server Base Boot Requirements 1.2, September 2019
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <Sami.Mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Some driver were recently moved to edk2-platforms, but the DSC file
in EmbeddedPkg still refers to them. Drop these references.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The controller supports up to 8 targets in practice (Not reported by the
controller, but based on the implementation of the virtual device),
report them in GetNextTarget and GetNextTargetLun. The firmware will
then try to communicate with them and create a block device for each one
that responds.
Support for multiple LUNs will be implemented in another series.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2390
Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200504210607.144434-7-nikita.leshchenko@oracle.com>
The PL180 SD host controller driver is only used on emulated ARM
platforms, uses an obsolete version of the MMC host protocol and
does not adhere to the UEFI driver model.
It has been moved into edk2-platforms alongside the only platforms
that use it, so we can drop it from the EDK2 core repository.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The ISP 1716 USB host controller driver does not implement the UEFI
driver model, and is not a suitable example for new drivers to be
based on. Also, it is currently only used on a limited set of ARM
development platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The SiI3132 SATA controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan9118 network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Lan91x network controller driver does not implement the UEFI driver
model, and is not a suitable example for new drivers to be based on.
Also, it is currently only used on a limited set of ARM development
platforms.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Synopsys DesignWare eMMC host controller driver does not implement
that SD/MMC host controller protocol that the UEFI spec defines, but an
obsolete EDK2-specific one that predates it. It also does not implement
the UEFI driver model.
Due to this, it has been moved into the edk2-platforms repository,
alongside its remaining users, which have been updated to refer to it in
its new location. So drop this version from EmbeddedPkg.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In EDK2, identifiers carrying the EFI prefix are reserved for ones
that are defined in the UEFI or PI specifications.
Since the MMC host protocol defined in EmbeddedPkg is not the one that
the UEFI spec defines, and given the confusion around this, let's rename
it to from gEfiMmcHostProtocolGuid to gEmbeddedMmcHostProtocolGuid.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The device manager UI library creates a UiApp submenu that contains a
list of network devices in the system. The logic that creates this menu
assumes that all handles have been connected to their drivers, but this
is not guaranteed in the general case: due to the way UiApp is constructed,
this logic runs before the UiApp entrypoint is invoked, which is where
ConnectAll() is normally called to ensure that all existing controllers
are connected to their drivers. Moving this call into DeviceManagerUiLib
is not an option, since it is incorporated into UiApp via NULL library
class resolution, and so it may not be included to begin with.
So work around this by doing an explicit additional ConnectAll() before
populating the pages.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Link: https://edk2.groups.io/g/devel/topic/72879609#57075
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683
In PEI phase, AP already been waked up through ApInitConfig,
so it can directly wake up it through change wakup buffer
instead of use ApInitReconfig flag. It can save some time.
Change code to only use ApInitReconfig flag in DXE phase
which must need to update the wake up buffer.
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2683
This patch fixes an assertion because AP can't find the CpuMpData.
When AP is waken up through Init-Sipi-Sipi, AP's IDT should
be restored to pre-allocated buffer so AP can get the CpuMpData
through the IDT base address.
Current code already has logic to handle this when CpuMpData->
InitFlag is ApInitConfig but misses the logic
when CpuMpData->InitFlag is ApInitReconfig.
This patch fixes this gap.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add a minimal, NULL class library called "PxeBcPcdProducerLib" for setting
the "PcdIPv4PXESupport" and "PcdIPv6PXESupport" PCDs of NetworkPkg, from
fw_cfg.
These PCDs control whether the UefiPxeBcDxe driver supports PXEv4 / PXEv6
boot. If a PXE version is disabled, the corresponding LoadFile protocol
instance is not produced by UefiPxeBcDxe, and so
EfiBootManagerRefreshAllBootOption() in UefiBootManagerLib does not
generate corresponding *new* boot options either. (Existent boot options
are not deleted.)
Hook the library into the UefiPxeBcDxe driver. (The driver is already
included from "NetworkComponents.dsc.inc", but we can list it again in the
DSC file, for providing <LibraryClasses> overrides.)
In OVMF, the PCDs could be set in PlatformPei too, but ArmVirtQemu does
not have fw_cfg access in the PEI phase. Hence a NULL class library that
can be linked into UefiPxeBcDxe.
When listing the PCDs under [PcdsDynamicDefault], stick with the DEC
default values.
QEMU switches:
-fw_cfg name=opt/org.tianocore/IPv4PXESupport,string=[yn]
-fw_cfg name=opt/org.tianocore/IPv6PXESupport,string=[yn]
The "opt/org.tianocore" prefix follows the "opt/RFQDN/" recommendation
from QEMU's "docs/specs/fw_cfg.txt".
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Per Sundstrom <per_sundstrom@yahoo.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2681
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200424075353.8489-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Introduce DEBUG_ON_HYPERVISOR_CONSOLE build flag to enable logging
debug output to the Xen console.
This will work with both Xen HVM guest and Xen PVH guest whereas the
default PlatformDebugLibIoPort works only in HVM when QEMU is present.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200423095358.2518197-6-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Remove support for DEBUG_ON_SERIAL_PORT because OvmfXen can't be build
with it due to a circular dependency:
DebugLib : BaseDebugLibSerialPort ->
SerialPortLib : XenConsoleSerialPortLib ->
XenHypercallLib : XenHypercallLib ->
DebugLib
Also, if that dependency is fixed, I think it would be harder to find
which console the debug is sent to when running an HVM guest. The xen
console isn't the serial console used by default. Furthermore,
XenHypercallLib isn't initialised early enough, so we would loose
debug output from the SEC phase and early PEI phase.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200423095358.2518197-2-anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2632
Both PEI and DXE instances of the MpInitLib are using PcdLib APIs, but
none of them list the dependency of the PcdLib in INF & header files.
This commit will explicitly add such dependency in .H and .INF files.
Test done:
Library level build pass for VS2015x86 tool chain
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2654
If FV is placed in FD region, its FV image size is fixed.
When FV image size exceeds it, it will trig the build break.
To alert the developer to adjust FV image size earlier,
I request to add new checker for the the spare FV space.
When the spare FV space is less than the specified threshold,
build tool will report the error.
This checker is the optional.
It can be enabled by -D FV_SPARE_SPACE_THRESHOLD=10000.
Macro is the value of the spare space threshold size.
It can be decimal or hex format. If it is enabled,
BaseTools will check every FV with the fixed size.
If FV doesn't meet with the size requirement,
Build tool will report error message to say there is no
enough spare space.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The BaseResetSystemLib instance is not suitable for OS runtime, because
its ResetShutdown() implementation calls PciRead16 (OVMF_HOSTBRIDGE_DID).
On q35, this boils down to a memory-mapped config space access -- but we
never ask the OS to map MMCONFIG for runtime.
There are at least three alternatives to approach this:
(1) Investigate "MdePkg/Library/DxeRuntimePciExpressLib", which offers
some kind of runtime mapping for MMCONFIG.
(2) Consume PciCf8Lib directly, rather than PciLib, in ResetSystemLib.
Then we'll read OVMF_HOSTBRIDGE_DID from the config space with IO port
accesses on q35 too, not just on i440fx. IO ports don't depend on page
tables.
(3) In the lib constructor, cache "mAcpiPmBaseAddress" based on
"PcdOvmfHostBridgePciDevId" (which is set by PlatformPei). Then the
host bridge type will be known at runtime without PCI config space
accesses.
This patch follows approach (3), in order to mirror AcpiTimerLib.
Notes:
* This patch is best viewed with "git show --find-copies-harder -C43".
* PCDs are not usable in the DXE_CORE, as the PCD PPI is gone, and the PCD
protocol is not available yet. (The DXE_CORE does consume ResetSystemLib
in practice, when OVMF is built with -D SOURCE_DEBUG_ENABLE.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien@xen.org>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-7-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
[lersek@redhat.com: move third Note (with repro info) to BZ comment]
Move the ResetShutdown() definition to its own file. This will help us
introduce:
- a new library instance that is not broken in runtime modules (the
current library instance is broken in runtime modules),
- another new library instance for bhyve support.
While at it, squash AcpiPmControl() into ResetShutdown(), open-coding
SuspendType=0. This is justified because we've had no other callers for
AcpiPmControl() since commit 2d9950a2bf ("OvmfPkg: remove
EnterS3WithImmediateWake () from ResetSystemLib", 2020-01-10).
Tested with the "reset -s" UEFI shell command, on both i440fx and q35.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-5-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Annotate the #include directives with the interfaces that this lib
instance needs from the included lib class headers. This will help us keep
the #include set minimal, when we move code around later.
While at it, synchronize the [LibraryClasses] section with the #include
directives -- list BaseLib.
Also #include the ResetSystemLib class header, which declares the
interfaces that this lib instance implements.
This forces us to spell out the "MdeModulePkg.dec" dependency too, under
[Packages].
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Rebecca Cran <rebecca@bsdio.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2675
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200417153751.7110-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
This reverts commit e069278905.
The default value for PcdAcpiExposedTableVersions is now set to 0x20
for Aarch64 systems. Setting this PCD in ArmVirtPkg/ArmVirtQemu.dsc
is no longer necessary.
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the default value of PcdAcpiExposedTableVersions for Aarch64
platforms to 0x20. Previously, the default was set to 0x3E for all
platforms. The new value removes ACPI 1.0b compatability, which forces
the use of XSDT 64-bit pointer, as required by Arm SBBR specification.
This also resolves an error reported by acpiview command, as seen on
the RPi (see https://github.com/pftf/RPi4/issues/25).
Signed-off-by: Samer El-Haj-Mahmoud <samer@elhajmahmoud.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2665
ReportDispatcher() is called by a software module to report a status code.
The interface is generic and can be called frequently throughout the boot
under various conditions. A certain set of conditions can cause the
currently implemented algorithm for resource exhaustion to fail. A sample
scenario:
1. ReportStatusCode() is called at a TPL higher than one of the registered
status code listeners making the call to the listener deferred until
TPL is lowered.
2. Additional calls to ReportStatusCode() occur, so the data buffer
continues to expand.
3. A call to ReportStatusCode() is made from within a memory allocation
call (e.g. CoreAllocatePoolPages ()) which is protected from re-
entrancy with mPoolMemoryLock. This will cause the ReallocatePool()
call in ReportDispatcher() to fail. Because the end pointer was already
moved to account for the data size, the end pointer is now moved
beyond the buffer and invalid.
This commit saves the original end pointer value into a local variable
called "FailSafeEndPointer" which tracks a safe end pointer to revert to
in the case the allocated buffer size (CallbackEntry->EndPointer -
CallbackEntry->StatusCodeDataBuffer) is still not large enough for the
data.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Kun Qin <Kun.Qin@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1562
The current SnpDxe implementation registers its ExitBootServices event
notification function (SnpNotifyExitBootServices ()) at TPL_NOTIFY. This
function calls PxeShutdown() which issues an UNDI shutdown operation.
Ultimately, this may invoke Shutdown() in EFI_SIMPLE_NETWORK_PROTOCOL.
The UEFI specification 2.8A Table 27 "TPL Restrictions" restricts the
TPL
for Simple Network Protocol to <= TPL_CALLBACK. In addition, it has been
observed in some 3rd party UNDI drivers to cause an issue further down
the call stack if the TPL is higher than TPL_CALLBACK on invocation.
Therefore, this commit changes the TPL of SnpNotifyExitBootServices() to
TPL_CALLBACK.
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Objects Encoding for FieldElements
in section '20.2.5.2 Named Objects Encoding'.
FieldElements can be one of the following:
NamedField | ReservedField | AccessField |
ExtendedAccessField | ConnectField
Some of these keywords are starting with an opcode,
allowing to identify their type.
E.g.: ReservedField := 0x00 PkgLength
This patch adds these FieldElement opcodes definitions to
the list of AML Opcode definitions.
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
NonDiscoverablePciDeviceDxe currently #defines the module-internal
PCI_MAX_BARS macro, with value 6 (and type "int").
Remove this private macro definition, and adopt PCI_MAX_BAR from
"MdePkg/Include/IndustryStandard/Pci22.h". Both the value and the type
remain unchanged (the standard PCI_MAX_BAR macro expands to 0x0006).
"NonDiscoverablePciDeviceIo.h" gets the definition of PCI_MAX_BAR via its
existent #include <IndustryStandard/Pci.h> directive.
Build-tested only.
Cc: Ard Biesheuvel <ard.biesheuvel@arm.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200409113017.18233-1-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1548
For clang compiler, This change will make the generated image not include the
absolute file path. If so, the generated debug image can be reproduced in the
different root directory. Also, it will reduce the size of debug image size.
To do so, use __FILE_NAME__ macro to replace __FILE__. __FILE_NAME__ is
Clang-specific extension that functions similar to __FILE__ but only renders
the last path component (the filename) instead of an invocation dependent full
path to that file, and __FILE_NAME__ is introduced since clang 9.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
After remove Used parameter, below code in ResetTokens can also be
removed:
1. The RunningApCount parameter will be reset in GetFreeToken.
2. The ReleaseSpinLock should be called in ReleaseToken function,
Code in this function seems like a later fix if ReleaseToken not
Release it. We should remove code here and fix the real issue if
existed.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Today's GetFreeToken() runs at the algorithm complexity of O(n)
where n is the size of the token list.
The change introduces a new global variable FirstFreeToken and it
always points to the first free token. So the algorithm complexity
of GetFreeToken() decreases from O(n) to O(1).
The improvement matters when some SMI code uses StartupThisAP()
service for each of the AP such that the algorithm complexity
becomes O(n) * O(m) where m is the AP count.
As next steps,
1. PROCEDURE_TOKEN.Used field can be optimized out because
all tokens before FirstFreeToken should have "Used" set while all
after FirstFreeToken should have "Used" cleared.
2. ResetTokens() can be optimized to only reset tokens before
FirstFreeToken.
v2: add missing line in InitializeDataForMmMp.
v3: update copyright year to 2020.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Enable support for NVMe storage in ArmVirtQemu/QemVirtQemuKernel in order
to simplify booting/installing operating systems that don't support
virtio.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2628
This patch reduces the size of IA32 binaries by ensuring that
no .debug_frame / .eh_frame sections are generated through forcing
SEH exception model, which is already the default in clang for X64.
EDK II does not support exceptions, and in future we should disable
them instead of switching to some other variant. Currently this
is not possible due to the following LLVM bugs:
https://bugs.llvm.org/show_bug.cgi?id=45324https://bugs.llvm.org/show_bug.cgi?id=45325
Upon applying this patch OvmfPkgIA32.dsc compilation in DEBUG mode
gets the following size decrease with clang 9.0.1.
Before: FV Space Information
SECFV [11%Full] 212992 total, 24512 used, 188480 free
PEIFV [22%Full] 917504 total, 203048 used, 714456 free
DXEFV [36%Full] 11534336 total, 4215672 used, 7318664 free
FVMAIN_COMPACT [37%Full] 3440640 total, 1287776 used, 2152864 free
After: FV Space Information
SECFV [10%Full] 212992 total, 22112 used, 190880 free
PEIFV [19%Full] 917504 total, 176392 used, 741112 free
DXEFV [31%Full] 11534336 total, 3657112 used, 7877224 free
FVMAIN_COMPACT [33%Full] 3440640 total, 1153896 used, 2286744 free
Cc: Liming Gao <liming.gao@intel.com>
Cc: Marvin H?user <mhaeuser@outlook.de>
Cc: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhiguang Liu <zhiguang.liu@intel.com>
Signed-off-by: Vitaly Cheptsov <vit9696@protonmail.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
This commit makes the behavior for PeiGetVariable() match the following
specification-defined behavior. It is now consistent with the DXE/SMM
variable driver implementation.
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2062
The UEFI specification v2.8 Errata A Section 8.2 "GetVariable()"
"Attributes" parameter description states:
"If not NULL, a pointer to the memory location to return the
attributes bitmask for the variable. See 'Related Definitions.'
If not NULL, then Attributes is set on output both when
EFI_SUCCESS and when EFI_BUFFER_TOO_SMALL is returned."
The attributes were previously only returned from the implementation
in Variable.c on EFI_SUCCESS. They are now returned on EFI_SUCCESS or
EFI_BUFFER_TOO_SMALL according to spec.
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Guomin Jiang <guomin.jiang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The local #define TT_ATTR_INDX_INVALID is used as a local error code
in the AArch64 implementation, but is misleadingly named to match the
definitions in ArmPkg/Include/Chipset/AArch64Mmu.h.
Rename it INVALID_ENTRY to reduce confusion and improve readability.
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
TT_ATTR_INDX_INVALID is #define'd but never used so drop it. Note
that this leaves a CPP macro of the same name in CpuDxe, but there,
it is actually being used, and although the name suggests that this
value is somehow defined by the architecture, this is really not the
case and it only has meaning within the scope of CpuDxe's implementation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Only a single call to GetRootTranslationTableInfo() remains, which
only provides the root table level. So let's create a new static
helper function that returns just this value, and use it instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
LookupAddresstoRootTable() uses a loop to go over its MaxAddress
argument, essentially to do a log2() and determine how many bits are
needed to represent it. Since the argument is the result of a shift-left
expression, there is some room for improvement here, and we can simply
use the bit count directly to calculate the value of T0SZ. At the same
time, we can omit calling GetRootTranslationTableInfo() to determine the
number of root table entries, and add a new helper that applies the
trivial calculation directly.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The routine PageAttributeToGcdAttribute() is exported by ArmMmuLib
but only ever used in the implementation of CpuDxe. So let's move
the function there and make it STATIC.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Before getting rid of GetRootTranslationTableInfo() and the related
LookupAddresstoRootTable() in AARCH64's version of ArmMmuLib, add a
version of the former to CpuDxe, which will be its only remaining
user. While at it, simplify it a bit, since in the CpuDxe cases,
both OUT arguments are always provided.
Note that this removes the declaration of GetRootTranslationTableInfo()
as well, but this is a declaration that is private to CpuDxe, and it
really doesn't belong here in the first place. Since ArmMmuLib's version
of GetRootTranslationTableInfo() is going to be replaced shortly anyway,
don't bother moving this .h declaration elsewhere.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Previous to this change, PvScsiFreeRings() was not undoing all
operations that was done by PvScsiInitRings().
This is because PvScsiInitRings() was both preparing rings (Allocate
memory and map it for device DMA) and setup the rings against device by
issueing a device command. While PvScsiFreeRings() only unmaps the rings
and free their memory.
Driver do not have a functional error as it makes sure to reset device
before every call site to PvScsiFreeRings(). However, this is not
intuitive.
Therefore, prefer to refactor the setup of the ring against device to a
separate function than PvScsiInitRings().
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331225637.123318-1-liran.alon@oracle.com>
[lersek@redhat.com: rename FreeDMACommBuffer label to FreeDmaCommBuffer]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Sean reported that VS2019 build produce the following build error:
INFO - PvScsi.c
INFO - Generating code
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): error C2220: the
following warning is treated as an error
INFO - d:\a\1\s\OvmfPkg\PvScsiDxe\PvScsi.c(459): warning C4244: '=':
conversion from 'const UINT16' to 'UINT8', possible loss of data
This result from an implicit cast from PVSCSI Response->ScsiStatus
(Which is UINT16) to Packet->TargetResponse (Which is UINT8).
Fix this issue by adding an appropriate explicit cast and verify with
assert that this truncation do not result in loss of data.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2651
Reported-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110452.51992-1-liran.alon@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: rewrap VS2019 diags in commit msg for PatchCheck.py]
Laszlo suggested that as I have contributed the OvmfPkg PVSCSI driver, I
will also register myself as a reviewer in Maintainers.txt.
In addition, as Nikita have assisted the development of the PVSCSI
driver and have developed another similar OvmfPkg SCSI driver, add him
as a reviewer to PVSCSI driver as-well.
Cc: Nikita Leshenko <nikita.leshchenko@oracle.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200331110244.51409-1-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
[lersek@redhat.com: fixup "F:" pattern by appending slash character]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
When DHCP is misconfigured on a network segment, such that two DHCP
servers attempt to reply to requests (and therefore race with each other),
the edk2 PXE client can confuse itself.
In PxeBcDhcp4BootInfo() / PxeBcDhcp6BootInfo(), the client may refer to a
DHCP reply packet as an "earlier" packet from the "same" DHCP server, when
in reality both packets are unrelated, and arrive from different DHCP
servers.
While the edk2 PXE client can do nothing to fix this, it should at least
not ASSERT() -- ASSERT() is for catching programming errors (violations of
invariants that are under the control of the programmer). ASSERT()s should
in particular not refer to external data (such as network packets). What's
more, in RELEASE builds, we get NULL pointer references.
Check the problem conditions with actual "if"s, and return
EFI_PROTOCOL_ERROR. This will trickle out to PxeBcLoadBootFile(), and be
reported as "PXE-E99: Unexpected network error".
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200331004749.16128-1-lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2032
'ping' command's receive flow utilizes a single Rx token which it
attempts to reuse before recycling the previously received packet.
This causes a situation where under ICMP traffic,
Ping6OnEchoReplyReceived() function will receive an already
recycled packet with EFI_SUCCESS token status and finally
dereference invalid pointers from RxData structure.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported for the Status variable in
AddGenericInitiatorAffinity() as it is not initialised
to a default value. This condition is only valid if
GenInitAffCount is equal to 0. Since GenInitAffCount
is already checked in BuildSratTable() this condition
can never happen.
The value of the Status variable is returned in
failure cases from appropriate locations in
AddGenericInitiatorAffinity(). The only case
where Status value is being used un-initialised
is the return statement at the end of
AddGenericInitiatorAffinity().
Therefore, to fix this issue EFI_SUCCESS can be
safely returned instead of returning the Status
variable at the end of the function.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the SRAT Generator modules.
Remove the CONST qualifier for the ImageHandle and the
SystemTable pointer in the library constructor and destructor
to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2538
For LzmaCompress or BrotliCompress, the platform may use the different
options and add their batch file, such as LzmaCompressPlatform.
Then, specify it in platform.dsc [BuildOptions] to override the default
one in tools_def.txt.
*_*_*_LZMA_PATH = LzmaCompressPlatform
This override tool will be used. But, its name is not specified in the
generated GuidedSectionTools.txt.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In case device is constrained by IOMMU or guest is running under AMD SEV,
input/output buffers provided to device (DataBuffer and SenseData) needs
to be explicitly mapped to device by PciIo->Map().
To avoid the overhead of mapping/unmapping the DataBuffer and SenseData
to the device for every SCSI requst (and to simplify code), introduce a
single DMA communication buffer that will be mapped to device on
initialization. When a SCSI request needs to be sent to device, the
DataBuffer and SenseData will be copied from/to the DMA communication
buffer as required. This will be done by the following commits.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-15-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement EXT_SCSI_PASS_THRU.GetNextTarget() and
EXT_SCSI_PASS_THRU.GetNextTargetLun().
ScsiBusDxe scans all MaxTarget * MaxLun possible devices.
This can take unnecessarily long for large number of targets.
To deal with this, VirtioScsiDxe has defined PCDs to limit the
MaxTarget & MaxLun to desired values which gives sufficient
performance. It is very important in virtio-scsi as it can have
very big MaxTarget & MaxLun.
Even though a common PVSCSI device has a default MaxTarget=64 and
MaxLun=0, we implement similar mechanism as virtio-scsi for completeness.
This may be useful in the future when PVSCSI will have bigger values
for MaxTarget and MaxLun.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2567
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20200328200100.60786-7-liran.alon@oracle.com>
Reviewed-by: Nikita Leshenko <nikita.leshchenko@oracle.com>
ACPI 6.3 added a 16-bit SPE overflow Interrupt field, replacing
2 of the 3 reserved bytes that are defined at the end of the
GICC structure for 6.0.
Add a new macro to initialise the new field.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Building OVMF for X64 with secure boot enabled on VS2019 results in
the following error:
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
error C2220: the following warning is treated as an error
d:\a\1\s\OvmfPkg\Library\GenericQemuLoadImageLib\GenericQemuLoadImageLib.c(154):
warning C4244: '=': conversion from 'UINTN' to 'UINT32', possible loss of data
Suppress the error by making the cast explicit.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2636
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Factory protocol has an erroneous
EFIAPI calling convention macro in the function
pointer declaration.
Remove the erroneous EFIAPI calling convention macro
from the interface declarations.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
On enabling the /analyse option the VS2017 compiler
reports: warning C6001: Using uninitialized memory.
This warning is reported as some variables that were
being logged were uninitialised. To fix this, moved
the logging code after the variables being logged are
initialised.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: 'return': conversion
from 'size_t' to 'UINT32', possible loss of data' for a number of
functions that compute the IORT node length. Similarly, it reports
warnings for IORT node length field assignments as the length
field is 16-bit wide.
This patch adds type casts at appropriate places and also implements
validations to ensure that the max width of the respective fields
is not exceeded.
This patch also fixes a typo in one of the local variable names.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Removing GT Block frame count check from AddGTBlockTimerFrames()
as this is already validated in BuildGtdtTable().
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ARM DCC serial port subtype is an option that is
supported by the DBG2 generator. However, the serial
port initialisation should only be done for PL011/SBSA
compatible UARTs.
Add check to conditionally initialise the serial port.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'warning C4366: The result of
the unary '&' operator may be unaligned' if an address of
an unaligned structure member is passed as an argument to
a function.
Fix this warning by using local variables in place of
unaligned structure members.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion from
'const UINT32' to 'UINT8', possible loss of data' when the ACPI
table revision field is being updated.
The width of the revision field in the EFI_ACPI_DESCRIPTION_HEADER
struct is 8-bit wide. Therefore, to fix the above warning make the
ACPI Table revision field usage 8-bit wide across Dynamic Tables
Framework.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ArmBootArch field of the FADT table is 16-bit wide. The
VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT16', possible loss of data' when assigning the
CM_ARM_BOOT_ARCH_INFO.BootArchFlags value as the width of this
field in CM_ARM_BOOT_ARCH_INFO is 32-bit wide.
To fix this warning, update the CM_ARM_BOOT_ARCH_INFO struct
to make the BootArchFlags field 16-bit wide. This also makes
it compatible with the ACPI FADT specification.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4267: '=': conversion from
'size_t' to 'UINT16', possible loss of data'.
The sizeof() operator is used to calculate the size of the
GT Block structure. The length field in the GT Block structure
is 16-bit wide. Since the return type of sizeof() operator
is size_t the VS2017 compiler reports the above warning.
To fix the warning, an explicit type cast is added. An additional
check is also performed to ensure that the calculated GT Block
length does not exceed MAX_UINT16.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The length field for the Processor Hierarchy node structure is
8-bit wide while the number of private resource field is 32-bit
wide. Therefore, the GetProcHierarchyNodeSize() returns the size
as a 32-bit value.
The VS2017 compiler reports 'warning C4244: '=': conversion from
'UINT32' to 'UINT8', possible loss of data' while assigning the
length field of the Processor Hierarchy node structure.
To fix this, a type cast is added. In addition, there is a check
to ensure that the Processor Hierarchy node size does not exceed
MAX_UINT8.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The VS2017 compiler reports 'warning C4244: '=': conversion
from 'UINT16' to 'UINT8', possible loss of data' for the
SPCR InterfaceType field assignment.
The SPCR InterfaceType field uses the same encoding as that
of the DBG2 table Port Subtype field. However SPCR.InterfaceType
is 8-bit while the Port Subtype field in DBG2 table is 16-bit.
Since the Configuration Manager represents the Serial port
information using the struct CM_ARM_SERIAL_PORT_INFO, the
PortSubtype member in this struct is 16-bit.
To fix the warning an explicit type case is added. A validation
is also added to ensure that the Serial Port Subtype value
provided by the Configuration Manager is within the 8-bit
range (less than 256).
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The VS2017 compiler reports 'error C2016: C requires that
a struct or union has at least one member' for the struct
CM_ARM_CPU_INFO.
Remove struct CM_ARM_CPU_INFO as this is not in use.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The edk2 BaseTools report a warning if a local header file
is not listed under the [Sources] section in the INF file.
Add header files to the [Sources] section in the respective
INF files to fix the warnings.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
VS2017 reports 'warning C4028: formal parameter 2 different
from declaration' for the library constructor and destructor
interfaces for the Generator modules. VS2017 compiler also
reports similar warnings for the DXE entry points.
Remove the CONST qualifier for the SystemTable pointer (the
second parameter to the constructor/destructor/DXE Entry
point) to make it compatible with the formal declaration.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2627
The commit will introduce a static PCD to specify the periodic interval
for checking the AP status when MP services StartupAllAPs() and
StartupThisAP() are being executed in a non-blocking manner. Or in other
words, specifies the interval for callback function CheckApsStatus().
The purpose is to provide the platform owners with the ability to choose
the proper interval value to trigger CheckApsStatus() according to:
A) The number of processors in the system;
B) How MP services (StartupAllAPs & StartupThisAP) being used.
Setting the PCD to a small value means the AP status check callback will
be triggered more frequently, it can benefit the performance for the case
when the BSP uses WaitForEvent() or uses CheckEvent() in a loop to wait
for AP(s) to complete the task, especially when the task can be finished
considerably fast on AP(s).
An example is within function CpuFeaturesInitialize() under
UefiCpuPkg/Library/RegisterCpuFeaturesLib/DxeRegisterCpuFeaturesLib.c,
where BSP will perform the same task with APs and requires all the
processors to finish the task before BSP proceeds to its next task.
Setting the PCD to a big value, on the other hand, can reduce the impact
on BSP by the time being consumed in CheckApsStatus(), especially when the
number of processors is huge so that the time consumed in CheckApsStatus()
is not negligible.
The type of the PCD is UINT32, which means the maximum possible interval
value can be set to:
4,294,967,295 microseconds = 4,295 seconds = 71.58 minutes = 1.19 hours
which should be sufficient for usage.
For least impact, the default value of the new PCD will be the same with
the current interval value. It will be set to 100,000 microseconds, which
is 100 milliseconds.
Unitest done:
A) OS boot successfully;
B) Use debug message to confirm the 'TriggerTime' parameter for the
'SetTimer' service is the same before & after this patch.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Brian J. Johnson <brian.johnson@hpe.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ASSERT in SetTime_Conf Consistency Test.
SCT Test expect return as Invalid Parameter.
So removed ASSERT().
While at it, check that the NanoSecond field is within the range given
by the UEFI specification.
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Currently, depending on the size of the region being (re)mapped, the
page table manipulation code may replace a table entry with a block entry,
even if the existing table entry uses different mapping attributes to
describe different parts of the region it covers. This is undesirable, and
instead, we should avoid doing so unless we are disregarding the original
attributes anyway. And if we make such a replacement, we should free all
the page tables that have become orphaned in the process.
So let's implement this, by taking the table entry path through the code
for block sized regions if a table entry already exists, and the clear
mask is set (which means we are preserving attributes from the existing
mapping). And when we do replace a table entry with a block entry, free
all the pages that are no longer referenced.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
FreePageTablesRecursive () traverses the page table tree depth first
to free all pages that it finds, without taking into account the
level at which it is operating.
Since TT_TYPE_TABLE_ENTRY aliases TT_TYPE_BLOCK_ENTRY_LEVEL3, we cannot
distinguish table entries from block entries unless we take the level
into account, and so we may be dereferencing garbage if we happen to
try and free a hierarchy of page tables that has level 3 pages in it.
Let's fix this by passing the level into FreePageTablesRecursive (),
and limit the recursion to levels < 3.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Older GCC (<= 4.9) fail to infer that Parent is never used unless it
has been assigned before, and may throw an error like
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:
In function ‘PlatformPeim’:
/work/git/edk2/ArmVirtPkg/Library/PlatformPeiLib/PlatformPeiLib.c:132:24:
error: ‘Parent’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
RangesProp = fdt_getprop (Base, Parent, "ranges", &RangesLen);
Set Parent to 0 at the start of the sequence to work around this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2601
Fixes: 82662a3b5f ("ArmVirtPkg/PlatformPeiLib: discover the TPM base ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
GCC 4.8 or 4.9 may throw the following error when building OVMF:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:
In function ‘QemuLoadKernelImage’:
Edk2/OvmfPkg/Library/X86QemuLoadImageLib/X86QemuLoadImageLib.c:416:30:
error: ‘CommandLine’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
UnicodeSPrintAsciiFormat (
cc1: all warnings being treated as errors
This is due to the fact that older GCCs fail to infer that CommandLine is
never actually used unless it has been assigned. So add a redundant NULL
assignment to help these older GCCs understand this.
Link: https://bugzilla.tianocore.org/show_bug.cgi?id=2630
Fixes: 7c47d89003 ("OvmfPkg: implement QEMU loader library for X86 with ...")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2575
The following components are currently missing from the [Components]
section of ArmPlatformPkg.dsc:
* ArmPlatformPkg/Library/HdLcd/HdLcd.inf
* ArmPlatformPkg/Library/PL111Lcd/PL111Lcd.inf
This commit includes the components in the package DSC build.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2574
The following components are currently missing from the [Components]
section of ArmPkg.dsc:
* ArmPkg/Drivers/ArmCrashDumpDxe/ArmCrashDumpDxe.inf
* ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf
* ArmPkg/Library/ArmMtlNullLib/ArmMtlNullLib.inf
* ArmPkg/Library/ArmSmcPsciResetSystemLib/ArmSmcPsciResetSystemLib.inf
This commit includes the components in the package DSC build.
Signed-off-by: Michael Kubacki <michael.kubacki@microsoft.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2365
This patch is to fix a build tool regression issue which was introduced
by commit 8ddec24dea.
compiler output message includes localized string.
So build failed when code decode the stdout/stderr byte arrays.
The cause of the build failed is that Commit 8ddec24dea
removed "errors='ignore'".
The build tool does not need to deal with localized string,
so we need to add "errors='ignore'".
this function is only invoked for structure PCDs.
Build failed if structurePcd is used in platform dsc file.
The patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Because of a bug, current EL gets passed to DC IVAC instruction instead
of the VA entry that needs to be invalidated.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ArmVirtGicArchLib was originally implemented before virtualization
emulation was implemented in QEMU, and the GICv2 model implemented only
the physical copy of control registers.
Enabling virtualization emulation to QEMU adds also the virtual copy,
doubling the RegSize returned by FindCompatibleNodeReg () in
ArmVirtGicArchLibConstructor (). This triggered an ASSERT when running
QEMU with -M virt,virtualization=on. Address this by testing for both
possible valid values of RegSize.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2588
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
FaultTolerantWritePei consumes:
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase.
VariablePei consumes:
- PcdFlashNvStorageVariableBase64.
Due to the previous patches in this series, the above PCDs are available
in the PEI phase, in the SMM_REQUIRE build.
FaultTolerantWritePei produces a GUID-ed HOB with
FAULT_TOLERANT_WRITE_LAST_WRITE_DATA as contents. It also installs a Null
PPI that carries the same gEdkiiFaultTolerantWriteGuid as the HOB.
VariablePei depends on the Null PPI mentioned above with a DEPEX, consumes
the HOB (which is safe due to the DEPEX), and produces
EFI_PEI_READ_ONLY_VARIABLE2_PPI.
This enables read-only access to non-volatile UEFI variables in the PEI
phase, in the SMM_REQUIRE build.
For now, the DxeLoadCore() function in
"MdeModulePkg/Core/DxeIplPeim/DxeLoad.c" will not access the
"MemoryTypeInformation" variable, because OVMF's PlatformPei always
produces the MemoryTypeInformation HOB.
(Note: when the boot mode is BOOT_ON_S3_RESUME, PlatformPei doesn't build
the HOB, but that's in sync with DxeLoadCore() also not looking for either
the HOB or the UEFI variable.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-5-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
The following flash-related base addresses:
- PcdFlashNvStorageVariableBase64,
- PcdFlashNvStorageFtwWorkingBase,
- PcdFlashNvStorageFtwSpareBase,
are always set to constant (invariable) values in the "-D SMM_REQUIRE"
build of OVMF. (That's because in the SMM build, actual pflash is a hard
requirement, and the RAM-based emulation is never available.)
Set said PCDs statically, at build. This will allow us to depend on their
values in the PEI phase.
When SMM_REQUIRE is FALSE, this change has no effect (confirmed by report
file comparison).
When SMM_REQUIRE is TRUE, the report file shows the following changes:
- "PcdOvmfFlashNvStorageFtwSpareBase" and
"PcdOvmfFlashNvStorageFtwWorkingBase" are no longer consumed by any
module directly,
- for "PcdFlashNvStorageFtwSpareBase", "PcdFlashNvStorageFtwWorkingBase"
and "PcdFlashNvStorageVariableBase64", the access method changes from
DYN to FIXED,
- for the latter PCDs, the zero (dynamic default) values are replaced with
the desired constants.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=386
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200310222739.26717-4-lersek@redhat.com>
Acked-by: Leif Lindholm <leif@nuviainc.com>
From the function description of GetIfrBinaryData(), FormSetGuid can be
NULL. However, FormSetGuid is passed to IsZeroGuid(). This causes exception
when FormSetGuid is NULL.
Signed-off-by: Nickle Wang <nickle.wang@hpe.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2580
Ovmf build failed on Windows with VS2017 tool chain.
The error message like:
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitr
dDynamicShellCommand.c(199): error C2220: warning treated as error -
no 'object' file generated
OvmfPkg\LinuxInitrdDynamicShellCommand\LinuxInitrdDynamicShellCommand.c(199):
warning C4244: '=': conversion from 'UINT64' to 'UINTN',
possible loss of data
This patch is to cast UINT64 type to UINTN type
when doing the variable assignment.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Some cosmetic fixups to the AArch64 MMU code:
- reflow overly long lines unless it hurts legibility
- add/remove whitespace according to the [de facto] coding style
- use camel case for goto labels
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307091008.14918-3-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
As it turns out, ARMv8 also permits accesses made with the MMU and
caches off to hit in the caches, so to ensure that any modifications
we make before enabling the MMU are visible afterwards as well, we
should invalidate page tables right after allocation like we do now on
ARM, if the MMU is still disabled at that point.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Message-Id: <20200307083849.8940-3-ard.biesheuvel@linaro.org>
Replace the slightly overcomplicated page table management code with
a simplified, recursive implementation that should be far easier to
reason about.
Note that, as a side effect, this extends the per-entry cache invalidation
that we do on page table entries to block and page entries, whereas the
previous change inadvertently only affected the creation of table entries.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-Id: <20200307083849.8940-2-ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
When the MDE_CPU_IA32 macro is not defined, there is no access to the
"KernelImageHandle" local variable in QemuStartKernelImage(). This breaks
the OvmfPkgIa32X64 and OvmfPkgX64 platform builds, at least with gcc-8.
Move the local variable to the inner scope, where declaration and usage
are inseparable.
(Note that such inner-scope declarations are frowned upon in the wider
edk2 codebase, but we use them liberally in ArmVirtPkg and OvmfPkg anyway,
because they help us reason about variable lifetime and visibility.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Fixes: 7c47d89003
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2572
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bob reports that VS2017 chokes on a tentative definition of the const
object 'mEfiFileProtocolTemplate', with the following error:
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
error C2220: warning treated as error - no 'object' file generated
OvmfPkg\QemuKernelLoaderFsDxe\QemuKernelLoaderFsDxe.c(130):
warning C4132: 'mEfiFileProtocolTemplate': const object should be initialized
Let's turn the only function that relies on this tentative definition
into a forward declaration itself, and move its definition after the
external definition of the object. That allows us to drop the tentative
definition of the const object, and hopefully make VS2017 happy.
Cc: "Feng, Bob C" <bob.c.feng@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 859b55443a ("OvmfPkg/PlatformBootManagerLib: switch to
QemuLoadImageLib") replaced a dependency on LoadLinuxLib with one on
QemuLoadImageLib in the PlatformBootManagerLib implementation that is
shared between all OVMF builds, without taking into account that even
the Xen targeted builds incorporate this code, which is only used to
load kernels passed via the QEMU command line.
Since this is dead code on Xen, we can satisfy the dependency using
the generic version of QemuLoadImageLib, which does not rely on
LoadLinuxLib, which we can therefore drop from OvmfXen.dsc.
Fixes: 859b55443a
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We already expect normal memory to be mapped writeback cacheable if
EDK2 itself is to make use of it, so doing an early sanity check on
the memory type of the allocation that the page tables happened to
land in isn't very useful. So let's drop it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The expression passed into ArmSetTTBR0 () in ArmConfigureMmu() is
sub-optimal at several levels:
- TranslationTable is already aligned, and if it wasn't, doing it
here wouldn't help
- TTBRAttributes is guaranteed not to have any bits set outside of
the 0x7f mask, so the mask operation is pointless as well,
- an additional (UINTN) cast for good measure is also not needed.
So simplify the expression.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
On ARMv7 and up, doing cache maintenance by set/way is only
permitted in the context of on/offlining a core, and any other
uses should be avoided. Add ASSERT()s in the right place to
ensure that any uses with the MMU enabled are caught in DEBUG
builds.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
ArmLib is a BASE type library, which should not depend or
even be aware on DXE type protocols. So drop the reference
to gEfiCpuArchProtocolGuid.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Suspiciously, ArmLib's INF does not contain a [LibraryClasses]
section at all, but it turns out that all the library includes
it contains (except for ArmLib.h itself) are actually bogus so
let's just drop all of them. While at it, replace <Uefi.h> with
the more accurate <Base.h> for a BASE type module, and put the
includes in a consistent order.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The clean/invalidate helper functions that operate on a single cache
line identified by set, way and level in a special, architected format
are only used by the implementations of the clean/invalidate routines
that operate on the entire cache hierarchy, as exposed by ArmLib.
The latter routines will be deprecated soon, so move the helpers out
of ArmLib.h and into a private header so they are safe from abuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the AARCH64 version of ArmMmuLib, we are currently relying on
set/way invalidation to ensure that the caches are in a consistent
state with respect to main memory once we turn the MMU on. Even if
set/way operations were the appropriate method to achieve this, doing
an invalidate-all first and then populating the page table entries
creates a window where page table entries could be loaded speculatively
into the caches before we modify them, and shadow the new values that
we write there.
So let's get rid of the blanket clean/invalidate operations, and
instead, update ArmUpdateTranslationTableEntry () to invalidate each
page table entry *after* it is written if the MMU is still disabled
at this point.
On ARMv8, it is guaranteed that memory accesses done by the page table
walker are cache coherent, and so we can ignore the case where the
MMU is on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
In the ARM version of ArmMmuLib, we are currently relying on set/way
invalidation to ensure that the caches are in a consistent state with
respect to main memory once we turn the MMU on. Even if set/way
operations were the appropriate method to achieve this, doing an
invalidate-all first and then populating the page table entries creates
a window where page table entries could be loaded speculatively into
the caches before we modify them, and shadow the new values that we
write there.
So let's get rid of the blanket clean/invalidate operations, and instead,
invalidate each page table right after allocating it, and each section
entry after it is updated (to address all the little corner cases that the
ARMv7 spec permits), and invalidate sets of level 2 entries in blocks,
using the generic invalidation routine from CacheMaintenanceLib
On ARMv7, cache maintenance may be required also when the MMU is
enabled, in case the page table walker is not cache coherent. However,
the code being updated here is guaranteed to run only when the MMU is
still off, and so we can disregard the case when the MMU and caches
are on.
Since the MMU and D-cache are already off when we reach this point, we
can drop the MMU and D-cache disables as well. Maintenance of the I-cache
is unnecessary, since we are not modifying any code, and the installed
mapping is guaranteed to be 1:1. This means we can also leave it enabled
while the page table population code is running.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Instead of overallocating memory and align the resulting base address
manually, use the AllocateAlignedPages () helper, which achieves the
same, and might even manage that without leaking a chunk of memory of
the same size as the allocation itself.
While at it, fix up a variable declaration in the same hunk, and drop
a comment whose contents add nothing to the following line of code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the AArch64 implementation of ArmMmuLib, which combines the
initial page table population code with the code that runs at later
stages to manage permission attributes in the page tables, ARM uses
two completely separate sets of routines for this.
Since ArmMmuLib is a static library, we can prevent duplication of
this code between different users, which usually only need one or
the other. (Note that LTO should also achieve the same.)
This also makes it easier to reason about modifying the cache
maintenance handling, and replace the set/way ops with by-VA
ops, since the code that performs the set/way ops only executes
when the MMU is still off.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Make the CONSTRUCTOR define in the .INF AARCH64 only, so we can drop
the empty stub that exists for ARM.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the UEFI memory
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled.
(This will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
This wasn't correctly testing for FD to be outside RAM,
when RAM base immediately follows the FD.
This is part of some cleanup for RPi4 in edk2-platform.
Signed-off-by: Andrei Warkentin <awarkentin@vmware.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The QemuLoadImageLib implementation we currently use for all OVMF
builds copies the behavior of the QEMU loader code that precedes it,
which is to disregard UEFI secure boot policies entirely when it comes
to loading kernel images that have been specified on the QEMU command
line. This behavior deviates from ArmVirtQemu based builds, which do
take UEFI secure boot policies into account, and refuse to load images
from the command line that cannot be authenticated.
The disparity was originally due to the fact that the QEMU command line
kernel loader did not use LoadImage and StartImage at all, but this
changed recently, and now, there are only a couple of reasons left to
stick with the legacy loader:
- it permits loading images that lack a valid PE/COFF header,
- it permits loading X64 kernels on IA32 firmware running on a X64
capable system.
Since every non-authentic PE/COFF image can trivially be converted into
an image that lacks a valid PE/COFF header, the former case can simply
not be supported in a UEFI secure boot context. The latter case is highly
theoretical, given that one could easily switch to native X64 firmware in
a VM scenario.
That leaves us with little justification to use the legacy loader at all
when UEFI secure boot policies are in effect, so let's switch to the
generic loader for UEFI secure boot enabled builds.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Linux v5.7 will introduce a new method to load the initial ramdisk
(initrd) from the loader, using the LoadFile2 protocol installed on a
special vendor GUIDed media device path.
Add support for this to our QEMU command line kernel/initrd loader.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Replace the open coded sequence to load Linux on x86 with a short and
generic sequence invoking QemuLoadImageLib, which can be provided by
a generic version that only supports the LoadImage and StartImage boot
services, and one that incorporates the entire legacy loading sequence
as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement another version of QemuLoadImageLib that uses LoadImage and
StartImage, but falls back to the legacy Linux loader code if that
fails. The logic in the legacy fallback routines is identical to the
current QEMU linux loader for X64 and IA32.
Note the use of the OVMF_LOADED_X86_LINUX_KERNEL protocol for the legacy
loaded image: this makes it possible to expose the LoadImage/StartImage
abstraction for the legacy loader, using the EFI paradigm of identifying
a loaded image solely by a handle.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In preparation of moving the legacy x86 loading to an implementation
of the QEMU load image library class, introduce a protocol header
and GUID that we will use to identify legacy loaded x86 Linux kernels
in the protocol database.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On x86, the kernel image consists of a setup block and the actual kernel,
and QEMU presents these as separate blobs, whereas on disk (and in terms
of PE/COFF image signing), they consist of a single image.
So add support to our FS loader driver to expose files via the abstract
file system that consist of up to two concatenated blobs, and redefine
the kernel file so it consists of the setup and kernel blobs, on every
architecture (on non-x86, the setup block is simply 0 bytes and is
therefore ignored implicitly)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
We have no need for exposing the kernel command line as a file,
so remove support for that. Since the remaining blobs (kernel
and initrd) are typically much larger than a page, switch to
the page based allocator for blobs at the same time.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the QEMU loader file system implementation inside this library,
and switch to the separate QemuLoadImageLib library and the associated
driver to expose the kernel and initrd passed via the QEMU command line.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement QemuLoadImageLib, and make it load the image provided by the
QEMU_EFI_LOADER_FS_MEDIA_GUID/kernel device path that we implemented
in a preceding patch in a separate DXE driver, using only the standard
LoadImage and StartImage boot services.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Expose the existing implementation of an abstract filesystem exposing
the blobs passed to QEMU via the command line via a standalone DXE
driver.
Notable difference with the original code is the switch to a new vendor
GUIDed media device path, as opposed to a vendor GUID hardware device
path, which is not entirely appropriate for pure software constructs.
Since we are using the GetTime() runtime service in a DXE_DRIVER type
module, we need to DEPEX explicitly on gEfiRealTimeClockArchProtocolGuid.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In an upcoming patch, we will introduce a separate DXE driver that
exposes the virtual SimpleFileSystem implementation that carries the
kernel and initrd passed via the QEMU command line, and a separate
library that consumes it, to be incorporated into the boot manager.
Since the GUID used for the SimpleFileSystem implementation's device
path will no longer be for internal use only, create a well defined
GUID to identify the media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2566
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-3-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Set the Timeout global variable to the same value as
PcdPlatformBootTimeOut. This way the "setvar" command in the UEFI shell,
and the "efibootmgr" command in a Linux guest, can report the front page
timeout that was requested on the QEMU command line (see
GetFrontPageTimeoutFromQemu()).
A DEBUG_VERBOSE message is logged on success too, for our QE team's sake.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200304094413.19462-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
ASSERT in PollMem_Conf, CopyMem_Conf, SetBarAttributes_Conf
Conformance Test.
SCT Test expect return as Invalid Parameter or Unsupported.
Added Checks for Function Parameters.
return Invalid or Unsupported if Check fails.
Added Checks in PciIoPollIo(), PciIoIoRead()
PciIoIoWrite()
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
SdMmcPciHcDxe driver used to read response only after
command and data transfer completed. According to SDHCI
specification response data is ready after the command
complete status is set by the host controller. Getting
the response data early will help debugging the cases
when command completed but data transfer timed out.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
To allow for easier debug of failing commands we
have added a capability to print TRB and command
packet when we start execution of the TRB(on
DEBUG_VERBOSE level) and when the TRB failed to
execute correctly(on DEBUG_ERROR level). Additionally
we will also print error interrupt status and interrupt
status register on failed SD command.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cache maintenance operations by set/way are only intended to be used
in the context of on/offlining a core, while it has been taken out of
the coherency domain. Any use intended to ensure that the contents of
the cache have made it to main memory is unreliable, since cacheline
migration and non-architected system caches may cause these contents
to linger elsewhere, without being visible in main memory once the
MMU and caches are disabled.
In KVM on Linux, there are horrid hacks in place to ensure that such
set/way operations are trapped, and replaced with a single by-VA
clean/invalidate of the entire guest VA space once the MMU state
changes, which can be costly, and is unnecessary if we manage the
caches a bit more carefully, and perform maintenance by virtual
address only.
So let's get rid of the call to ArmInvalidateDataCache () in the
PrePeiCore startup code, and instead, invalidate the temporary RAM
region by virtual address, which is the only memory region we will
be touching with the caches and MMU both disabled and enabled,
which will lead to data corruption if data written with the MMU off
is shadowed by clean, stale cachelines that stick around when the
MMU is enabled again.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
This driver depends on the gEfiCpuArchProtocolGuid protocol but does
not declare it, and so this dependency gets satisfied transitively
via ArmLib. However, ArmLib will drop this dependency as it does not
actually use it, so declare it for LcdGraphicsOutputDxe instead.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
The Linaro CI reports:
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:132:7:
error: variable 'Status' is used uninitialized whenever 'if' condition is
false [-Werror,-Wsometimes-uninitialized]
if (mInitrdLoadFile2Handle != NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:141:10:
note: uninitialized use occurs here
return Status;
^~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:132:3:
note: remove the 'if' if its condition is always true
if (mInitrdLoadFile2Handle != NULL) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
OvmfPkg/LinuxInitrdDynamicShellCommand/LinuxInitrdDynamicShellCommand.c:130:23:
note: initialize the variable 'Status' to silence this warning
EFI_STATUS Status;
^
= 0
Fix this by pulling the return of Status into the conditional block where
it is assigned, and return EFI_SUCCESS otherwise.
Fixes: 2632178bc6
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Commit 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI
events to MM context") update the ARM specific standalone MM client
driver to register for certain events in the entrypoint code, but did
so in a way that makes the entrypoint always return with an error.
Instead, return EFI_SUCCESS if registering for those events succeeds,
and back out the registrations that did succeed if one fails, and
return an error.
Fixes: 2fe25a74d6 ("ArmPkg/MmCommunicationDxe: relay architected PI events to MM context")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
At the same time, the following file had to undergo TAB expansion:
ArmPlatformPkg/Scripts/Ds5/profile.py
I used "expand -t 4", conforming to the Indentation section of PEP-8
<https://www.python.org/dev/peps/pep-0008/#indentation>.
Both the CRLF conversion and the TAB expansion are motivated by
"PatchCheck.py". "PatchCheck.py" is also the reason why CRLF conversion
and TAB expansion have to happen in the same patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-4-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
The CRLF conversion is motivated by "PatchCheck.py".
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
We're going to switch the internal line terminators globally to LF at some
point, but until then, let's use CRLF consistently. Convert source files
with LFs in them to CRLF, using "unix2dos".
"git show -b" prints no code changes for this patch.
(I collected all the file name suffixes in this package, with:
$ git ls-files -- $PACKAGE | rev | cut -f 1 -d . | sort -u | rev
I eliminated those suffixes that didn't stand for text files, then
blanket-converted the rest with unix2dos. Finally, picked up the actual
changes with git-add.)
At the same time, the following three files had to undergo TAB expansion:
ArmPkg/Library/ArmSoftFloatLib/ArmSoftFloatLib.c
ArmPkg/Library/GccLto/liblto-aarch64.s
ArmPkg/Library/GccLto/liblto-arm.s
I used "expand -t 2", in order to stay close to the edk2 coding style
(which uses two spaces for indentation.)
Both the CRLF conversion and the TAB expansion are motivated by
"PatchCheck.py". "PatchCheck.py" is also the reason why CRLF conversion
and TAB expansion have to happen in the same patch.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1659
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200227213903.13884-2-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
During normal boot, CpuS3DataDxe allocates
- an empty CPU_REGISTER_TABLE entry in the
"ACPI_CPU_DATA.PreSmmInitRegisterTable" array, and
- an empty CPU_REGISTER_TABLE entry in the "ACPI_CPU_DATA.RegisterTable"
array,
for every CPU whose APIC ID CpuS3DataDxe can learn.
Currently EFI_MP_SERVICES_PROTOCOL is used for both determining the number
of CPUs -- the protocol reports the present-at-boot CPU count --, and for
retrieving the APIC IDs of those CPUs.
Consequently, if a CPU is hot-plugged at OS runtime, then S3 resume
breaks. That's because PiSmmCpuDxeSmm will not find the hot-added CPU's
APIC ID associated with any CPU_REGISTER_TABLE object, in the SMRAM copies
of either of the "RegisterTable" and "PreSmmInitRegisterTable" arrays. The
failure to match the hot-added CPU's APIC ID trips the ASSERT() in
SetRegister() [UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c].
If "PcdQ35SmramAtDefaultSmbase" is TRUE, then:
- prepare CPU_REGISTER_TABLE objects for all possible CPUs, not just the
present-at-boot CPUs (PlatformPei stored the possible CPU count to
"PcdCpuMaxLogicalProcessorNumber");
- use QEMU_CPUHP_CMD_GET_ARCH_ID for filling in the "InitialApicId" fields
of the CPU_REGISTER_TABLE objects.
This provides full APIC ID coverage for PiSmmCpuDxeSmm during S3 resume,
accommodating CPUs hot-added at OS runtime.
This patch is best reviewed with
$ git show -b
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-17-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The @file comments in UefiCpuPkg/CpuS3DataDxe say,
[...] It also only supports the number of CPUs reported by the MP
Services Protocol, so this module does not support hot plug CPUs. This
module can be copied into a CPU specific package and customized if these
additional features are required. [...]
The driver is so small that the simplest way to extend it with hotplug
support is indeed to clone it at first. In this patch, customize the
driver only with the following no-op steps:
- Update copyright notices.
- Update INF_VERSION to the latest INF spec version (1.29).
- Update FILE_GUID.
- Drop the UNI files.
- Replace EFI_D_VERBOSE with DEBUG_VERBOSE, to appease "PatchCheck.py".
This patch is best reviewed with:
$ git show --find-copies-harder
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-15-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
With the help of the Post-SMM Pen and the SMBASE relocation functions
added in the previous patches, we can now complete the root MMI handler
for CPU hotplug.
In the driver's entry point function:
- allocate the pen (in a reserved page in normal RAM),
- install the default ("first") SMI handler for hot-added CPUs (which
includes priming the exchange area between the MM Monarch and the
hot-added CPUs, i.e., shutting the APIC ID gate).
In the root MMI handler, for each hot-added CPU:
- record the APIC ID of the new CPU in CPU_HOT_PLUG_DATA,
- relocate the SMBASE of the new CPU,
- inform PiSmmCpuDxeSmm by calling
EFI_SMM_CPU_SERVICE_PROTOCOL.AddProcessor().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-14-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Call QemuCpuhpCollectApicIds() in the root MMI handler. The APIC IDs of
the hotplugged CPUs will be used for several purposes in subsequent
patches.
For calling QemuCpuhpCollectApicIds(), pre-allocate both of its output
arrays "PluggedApicIds" and "ToUnplugApicIds" in the driver's entry point
function. The allocation size is dictated by the possible CPU count, which
we fetch from "CPU_HOT_PLUG_DATA.ArrayLength".
The CPU_HOT_PLUG_DATA structure in SMRAM is an out-of-band information
channel between this driver and PiSmmCpuDxeSmm, underlying
EFI_SMM_CPU_SERVICE_PROTOCOL.
In order to consume "CPU_HOT_PLUG_DATA.ArrayLength", extend the driver's
DEPEX to EFI_SMM_CPU_SERVICE_PROTOCOL. PiSmmCpuDxeSmm stores the address
of CPU_HOT_PLUG_DATA to "PcdCpuHotPlugDataAddress", before it produces
EFI_SMM_CPU_SERVICE_PROTOCOL.
Stash the protocol at once, as it will be needed later.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-11-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Set "PcdCpuHotPlugSupport" to TRUE, when OVMF is built with SMM_REQUIRE.
Consequences:
(1) In PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c],
resources are allocated and populated in advance for all possible
(i.e., potentially hot-added) processors, rather than only the
processors present at boot.
The possible count (called "mMaxNumberOfCpus") is set from
"PcdCpuMaxLogicalProcessorNumber"; we set the latter in
OvmfPkg/PlatformPei. (Refer to commit 83357313dd,
"OvmfPkg/PlatformPei: rewrite MaxCpuCountInitialization() for CPU
hotplug", 2020-01-29).
(2) The AddProcessor() and RemoveProcessor() member functions of
EFI_SMM_CPU_SERVICE_PROTOCOL, implemented in
"UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c", are no longer
short-circuited to EFI_UNSUPPORTED.
We'll rely on these functions in the CPU hotplug SMI handler, in a
subsequent patch.
(3) In PiCpuSmmEntry(), the address of the CPU_HOT_PLUG_DATA structure (in
SMRAM) is exposed via the dynamic-only "PcdCpuHotPlugDataAddress".
This structure is an information channel between the CPU hotplug SMI
handler, and EFI_SMM_CPU_SERVICE_PROTOCOL. Namely, at the first
"Index" where the following equality holds:
CPU_HOT_PLUG_DATA.ApicId[Index] == INVALID_APIC_ID
a hot-plugged CPU can be accepted, with the steps below:
(3.1) The hotplug SMI handler has to overwrite INVALID_APIC_ID with the
new CPU's APIC ID.
(3.2) The new CPU's SMBASE has to be relocated to:
CPU_HOT_PLUG_DATA.SmBase[Index]
(which was precomputed in step (1) above).
(3.3) The hotplug SMI handler is supposed to call
EFI_SMM_CPU_SERVICE_PROTOCOL.AddProcessor().
Note: we need not spell out "PcdCpuHotPlugDataAddress" in the
[PcdsDynamicDefault] sections of the OVMF DSC files, just so the PCD
become dynamically settable. That's because "UefiCpuPkg.dec" declares this
PCD with [PcdsDynamic, PcdsDynamicEx] access methods *only*.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-6-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
With "PcdCpuSmmEnableBspElection" set to FALSE, PiSmmCpuDxeSmm always
considers the processor with index 0 to be the SMM Monarch (a.k.a. the SMM
BSP). The SMM Monarch handles the SMI for real, while the other CPUs wait
in their SMM loops.
In a subsequent patch, we want to set "PcdCpuHotPlugSupport" to TRUE. For
that, PiCpuSmmEntry() [UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c] forces
us with an ASSERT() to set "PcdCpuSmmEnableBspElection" to TRUE as well.
To satisfy that expectation, we can simply remove our current
"PcdCpuSmmEnableBspElection|FALSE" setting, and inherit the default TRUE
value from "UefiCpuPkg.dec".
This causes "mSmmMpSyncData->BspIndex" in PiSmmCpuDxeSmm to lose its
static zero value (standing for CPU#0); instead it becomes (-1) in
general, and the SMM Monarch is elected anew on every SMI.
The default SMM Monarch Election is basically a race -- whichever CPU can
flip "mSmmMpSyncData->BspIndex" from (-1) to its own index, becomes king,
for handling that SMI. Refer to SmiRendezvous()
[UefiCpuPkg/PiSmmCpuDxeSmm/MpService.c].
I consider this non-determinism less than ideal on QEMU/KVM; it would be
nice to stick with a "mostly permanent" SMM Monarch even with the Election
enabled. We can do that by implementing the PlatformSmmBspElection() API
in the SmmCpuPlatformHookLibQemu instance:
The IA32 APIC Base MSR can be read on each CPU concurrently, and it will
report the BSP bit as set only on the current Boot Service Processor. QEMU
marks CPU#0 as the BSP, by default.
Elect the current BSP, as reported by QEMU, for the SMM Monarch role.
(Note that the QEMU commit history is not entirely consistent on whether
QEMU/KVM may mark a CPU with nonzero index as the BSP:
- At tag v4.2.0, "target/i386/cpu.c" has a comment saying "We hard-wire
the BSP to the first CPU". This comment goes back to commit 6cb2996cef5e
("x86: Extend validity of bsp_to_cpu", 2010-03-04).
- Compare commit 9cb11fd7539b ("target-i386: clear bsp bit when
designating bsp", 2015-04-02) though, especially considering KVM.
Either way, this OvmfPkg patch is *not* dependent on CPU index 0; it just
takes the race on every SMI out of the game.)
One benefit of using a "mostly permanent" SMM Monarch / BSP is that we can
continue testing the SMM CPU synchronization by deterministically entering
the firmware on the BSP, vs. on an AP, from Linux guests:
$ time taskset -c 0 efibootmgr
$ time taskset -c 1 efibootmgr
(See
<https://github.com/tianocore/tianocore.github.io/wiki/Testing-SMM-with-QEMU,-KVM-and-libvirt#uefi-variable-access-test>.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512#c5
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-5-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The "ACPI_CPU_DATA.NumberOfCpus" field is specified as follows, in
"UefiCpuPkg/Include/AcpiCpuData.h" (rewrapped for this commit message):
//
// The number of CPUs. If a platform does not support hot plug CPUs,
// then this is the number of CPUs detected when the platform is booted,
// regardless of being enabled or disabled. If a platform does support
// hot plug CPUs, then this is the maximum number of CPUs that the
// platform supports.
//
The InitializeCpuBeforeRebase() and InitializeCpuAfterRebase() functions
in "UefiCpuPkg/PiSmmCpuDxeSmm/CpuS3.c" try to restore CPU configuration on
the S3 Resume path for *all* CPUs accounted for in
"ACPI_CPU_DATA.NumberOfCpus". This is wrong, as with CPU hotplug, not all
of the possible CPUs may be present at the time of S3 Suspend / Resume.
The symptom is an infinite wait.
Instead, the "mNumberOfCpus" variable should be used, which is properly
maintained through the EFI_SMM_CPU_SERVICE_PROTOCOL implementation (see
SmmAddProcessor(), SmmRemoveProcessor(), SmmCpuUpdate() in
"UefiCpuPkg/PiSmmCpuDxeSmm/CpuService.c").
When CPU hotplug is disabled, "mNumberOfCpus" is constant, and equals
"ACPI_CPU_DATA.NumberOfCpus" at all times.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200226221156.29589-3-lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
[lersek@redhat.com: shut up UINTN->UINT32 warning from Windows VS2019 PR]
Complement commit 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei
clone", 2018-03-09) by detecting TPM 1.2 devices.
Since Tpm12RequestUseTpm() returns success on any TPM interface,
(including FIFO & CRB which are TPM 2.0), try to send a GetTicks TPM
1.2 command to probe the version. In case of failure, fallback on TPM
2.0 path.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20200226152433.1295789-3-marcandre.lureau@redhat.com>
Tested-by: Simon Hardy <simon.hardy@itdev.co.uk>
Before taking any actions, check if an instance of the LoadFile2 exists
already on the Linux initrd media GUID device path, and whether it was
provided by this command. If so, abort, since no duplicate instances of
the device path should exist.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is the UEFI counterpart to my Linux series which generalizes
mixed mode support into a feature that requires very little internal
knowledge about the architecture specifics of booting Linux on the
part of the bootloader or firmware.
Instead, we add a .compat PE/COFF header containing an array of
PE_COMPAT nodes containing <machine type, entrypoint> tuples that
describe alternate entrypoints into the image for different native
machine types, e.g., IA-32 in a 64-bit image so it can be booted
from IA-32 firmware.
This patch implements the PE/COFF emulator protocol to take this new
section into account, so that such images can simply be loaded via
LoadImage/StartImage, e.g., straight from the shell.
This feature is based on the EDK2 specific PE/COFF emulator protocol
that was introduced in commit 57df17fe26 ("MdeModulePkg/DxeCore:
invoke the emulator protocol for foreign images", 2019-04-14).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
EDK2's implementation of the LoadImage() boot service permits non-native
binaries to be loaded (i.e., X64 images on IA32 firmware), but any
attempts to start such an image using StartImage() will return
EFI_UNSUPPORTED.
The integration of the PE/COFF emulator protocol into the DXE core
deviates slightly from this paradigm, given that its IsImageSupported
hook as well as its RegisterImage hook are invoked from LoadImage,
and by the time StartImage is called, no opportunity is given to the
provider of the PE/COFF emulator protocol to prevent an image from
being started if it only supports loading it.
To address this disparity, let's move the invocation of RegisterImage()
to the implementation of the StartImage() boot service, allowing the
emulator to permit LoadImage() but reject StartImage() on images that
turn out not to meet the requirements of the emulator as it is being
started.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Add a new 'initrd' command to the UEFI Shell that allows any file that is
accessible to the shell to be registered as the initrd that is returned
when Linux's EFI stub loader invokes the LoadFile2 protocol on its special
vendor media device path.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2564
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that all the TPM2 related plumbing is in place, we can add the
final piece that performs the measurements of loaded images into
the appropriate PCRs.
This patch ports commit d5a002aba0 ("OvmfPkg: plug
DxeTpm2MeasureBootLib into SecurityStubDxe", 2018-03-09) to ArmVirtQemu.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the DXE phase component that publishes the HII pages and
associated logic to enable TPM2 parameters to be configured by
the user via the setup menu.
This patch ports (parts of) the following commits to ArmVirtQemu:
- 3103389043 ("OvmfPkg: Add TCG2 Configuration menu to the Device
Manager menu", 2019-02-11)
- cf3ad972a2 ("OvmfPkg: reorganize TPM2 support in DSC/FDF files",
2020-01-09)
- f55477fe2d ("OvmfPkg: use HII type PCDs for TPM2 config related
variables", 2020-01-09)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Enable the TPM2 support module in the DXE phase, and the associated
libraries and PCDs that it requires. This will be wired into the
measured boot support code in a subsequent patch.
Note that Tcg2Dxe.inf is added to ArmVirtQemuFvMain.fdf.inc, which
is shared with other platforms in ArmVirtPkg, but as those will not
set the TPM2_ENABLE define, this change does not affect them.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module", 2018-03-09)
- b9777bb42e ("OvmfPkg: add Tcg2PhysicalPresenceLibQemu", 2018-05-22)
-- only to match OVMF's current lib class resolutions
- 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib if and only if
TPM2_ENABLE", 2019-07-04)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DxeTpmMeasurementLib should only be used on platforms that implement
measured boot, which we will do in a future patch, but only for
ArmVirtQemu, as the remaining ones are fundamentally incompatible,
given that they do not implement a PEI phase.
So use TpmMeasurementLibNull as the default resolution for all
ArmVirtPkg platforms, regardless of how they are built.
This mirrors commit 1ec05b81e5 ("OvmfPkg: use DxeTpmMeasurementLib
if and only if TPM2_ENABLE", 2019-07-04).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Incorporate the PEI components and the associated library class
resolutions and PCD declarations to enable TPM2 support in the
PEI phase.
This patch ports (parts of) the following OvmfPkg commits to
ArmVirtQemu:
- 6cf1880fb5 ("OvmfPkg: add customized Tcg2ConfigPei clone",
2018-03-09)
- 4672a48928 ("OvmfPkg: include Tcg2Pei module", 2018-03-09)
- b9130c866d ("OvmfPkg: link Sha384 and Sha512 support into Tcg2Pei
and Tcg2Dxe", 2018-08-16)
- 5d3ef15da7 ("OvmfPkg: link SM3 support into Tcg2Pei and Tcg2Dxe",
2019-07-19)
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask defaults to 0x0 so
that the TPM init code adopts the currently active PCR banks as
the ones that are enabled by default.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
As a first step in gradually adding TPM2 support to ArmVirtQemu, add
the TPM2_ENABLE configurable to the [Defines] section, and if it is
set, add the ResetSystem PEIM to the build, along with the library
class references that we will need to support it:
- wire ArmVirtPsciResetSystemPeiLib into the ResetSystem PEIM itself,
which will be in charge of performing the actual reset
- add PeiResetSystemLib as the common ResetSystemLib resolution for
PEIM class modules, so that other PEIMs will invoke the PPI
published by the ResetSystem PEIM.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Implement a ArmVirtPkg specific version of the PSCI ResetSystemLib that
is usable in the PEI phase, as the existing one relies on the FDT client
protocol, making it unsuitable.
Note that accessing the device tree passed by QEMU via its initial base
address is guaranteed to be safe at any time during the PEI phase, so we
can defer discovery of the PSCI method until the time the reset library
is actually invoked (which is rarely)
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Introduce a boolean PCD that tells us whether TPM support is enabled
in the build, and if it is, record the TPM base address in the existing
routine that traverses the device tree in the platform PEIM.
If a TPM is found, install the gOvmfTpmDiscoveredPpiGuid signalling PPI
that will unlock the dispatch of OvmfPkg's Tcg2ConfigPei. If TPM2
support is enabled in the build but no TPM2 device is found, install the
gPeiTpmInitializationDonePpiGuid PPI, which is normally installed by
Tcg2ConfigPei if no TPM2 is found, but in our case Tcg2ConfigPei will
never run so let's do it here instead.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
We currently include PcdLib.h in PlatformPeiLib, without declaring
this dependency in its .INF description. Since all the PCDs we use
resolve to fixed type in practice, this does not really matter at
the moment, but since we will be adding dynamic PCD references in
a subsequent patch, let's make the PcdLib dependency explicit, so
that its dispatch is guaranteed to be ordered correctly with respect
to the provider of the dynamic PCD PPI.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
On ARM systems, the TPM does not live at a fixed address, and so we
need the platform to discover it first. So introduce a PPI that signals
that the TPM address has been discovered and recorded in the appropriate
PCD, and make Tcg2ConfigPei depex on it when built for ARM or AARCH64.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2560
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2556
This patch uses CPUID signature check to skip reading the PlatformId MSR,
which is not implemented on AMD processors.
The PlatformId is used for loading microcode patches, which is also not
supported and AMD-based platforms. To mitigate the PlatformId dependency,
PcdCpuMicrocodePatchAddress and PcdCpuMicrodePatchRegionSize must be set
to 0 (default value), in order to bypass microcode loading code paths.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Leo Duran <leo.duran@amd.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2563
This patch is to fix a incremental build regression bug
which happen when using nmake. That's introduced by 818283de3f.
If there is white space before !INCLUDE instruction, nmake will not
process it. Source code's dependent header files are listed in
${deps_file} file, if it's not included successfully, nmake will
not detect the change of those header file.
This patch has been verified in Windows with VS2015 and Linux with GCC5.
The header file add/modify/delete can trig the incremental build with this fix.
There is no impact on the clean build.
Cc: Andrew Fish <afish@apple.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Leif Lindholm <leif@nuviainc.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Tested-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2534
Extend validation of ACPI structure lengths which are read from the
ACPI table being parsed. Additionally check if the structure 'Length'
field value is positive. If not, stop parsing the faulting table.
Some ACPI tables define internal structures of variable size. The
'Length' field inside the substructure is used to update a pointer used
for table traversal. If the byte-length of the structure is equal to 0,
acpiview can enter an infinite loop. This condition can occur if, for
example, the zero-allocated ACPI table buffer is not fully populated.
This is typically a bug on the ACPI table writer side.
In short, this method helps acpiview recover gracefully from a
zero-valued ACPI structure length.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsSignatureFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
All intermediate results inside this function will be checked and
returned immediately upon any failure or error, like out-of-resource,
hash calculation error or certificate retrieval failure.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
To avoid false-negative issue in check hash against dbx, both error
condition (as return value) and check result (as out parameter) of
IsCertHashFoundInDatabase() are added. So the caller of this function
will know exactly if a failure is caused by a black list hit or
other error happening, and enforce a more secure operation to prevent
secure boot from being bypassed. For a white list check (db), there's
no such necessity.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
The dbx fetching code inside the while/for-loop causes code hard to
understand. Since there's no need to get dbx more than once, this patch
simplify the code logic by moving related code to be outside the while-
loop. db fetching code is also refined accordingly to reduce the indent
level of code.
More comments are also added or refined to explain more details.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
In timestamp check after the cert is found in db, the original code jumps
to 'Done' if any error happens in fetching dbx variable. At any of the
jump, VerifyStatus equals to TRUE, which means allowed-by-db. This should
not be allowed except to EFI_NOT_FOUND case (meaning dbx doesn't exist),
because it could be used to bypass timestamp check.
This patch add code to change VerifyStatus to FALSE in the case of memory
allocation failure and dbx fetching failure to avoid potential bypass
issue.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1608
Normally two times of calling gRT->GetVariable() are needed to get
the data of a variable: get the variable size by passing zero variable
size, and then allocate enough memory and pass the correct variable size
and buffer.
But in the inner loop in IsAllowedByDb(), the DbxDataSize was not
initialized to zero before calling gRT->GetVariable(). It won't cause
problem if dbx does not exist. But it will give wrong result if dbx
exists and the DbxDataSize happens to be a small enough value. In this
situation, EFI_BUFFER_TOO_SMALL will be returned. Then the result check
code followed will jump to 'Done', which is not correct because it's
actually the value expected.
if (Status == EFI_BUFFER_TOO_SMALL) {
goto Done;
}
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
In case the signers' certificate stack, retrieved from the PE/COFF image's
Authenticode blob, has zero elements (=there are zero signer certificates),
then we should consider the image forbidden by DBX, not accepted by DBX.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Check if the ACPI table length, as reported in the ACPI table header, is
big enough to fit at least the header itself.
If not, report an error to the user and stop parsing the table in order
to prevent buffer overruns.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove duplicate Generic Address Structure (GAS) and ACPI table header
size definitions. Replace any dependencies with the definitions from
Acpi63.h.
AcpiParser.h redefines the size of Generic Address Structure (GAS) and
the ACPI table header. The motivation is to 'minimise any reference to
the EDK2 ACPI headers in an attempt to provide cross checking'. While
the redefined values are unlikely to change, redefinition causes
unnecessary maintenance overhead for acpiview.
In addition to this, EDK2 ACPI headers are referenced throughout the
entire project, so the assumption should be that the definitions in
these header files are correct.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Match data type and format specifier for printing.
1. Type cast ProcessorNumber and FeatureIndex to UINT32
as %d only expects a UINT32.
2. Use %08x instead of %08lx for CacheControl to print Index
as it is UINT32 type.
3. Use %016lx instead of %08lx for MemoryMapped to print
(Index | LShiftU64 (HighIndex, 32)) as it is UINT64 type.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1989
The commit will avoid unmapping the same resource in error handling logic
for function BuildAdmaDescTable() and SdMmcCreateTrb().
For the error handling in BuildAdmaDescTable():
The error is directly related with the corresponding Map() operation
(mapped address beyond 4G, which is not supported in ADMA), so the Unmap()
operation is done in the error handling logic, and then setting
'Trb->AdmaMap' to NULL to avoid double Unmap.
For the error handling in SdMmcCreateTrb():
The error is not directly related with the corresponding Map() operation,
so the commit will update the code to left SdMmcFreeTrb() for the Unmap
operation to avoid double Unmap.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
This patch removes the header file added by c7c964b.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Commit c7c964b and dd01704 add header file for FIT table and update
MpInitLib to support FIT based microcode shadow operation. There are
comments that FIT is Intel specific specification instead of industry
standard, which should not be placed in EDK2 MdePkg and UefiCpuPkg.
So this patch adds a platform PPI for the microcode shadow logic, and
remove the FIT related code from EDK2.
The FIT based microcode shadow support will be implemented as a new
platform PEIM in IntelSiliconPkg in edk2-platforms.
This patch doesn't provide a DXE version shadow microcode protocol,
a platform which only uses DxeMpInitLib instance only supports PCD
based microcode shadowing.
A detailed design doc can be found here:
https://edk2.groups.io/g/devel/files/Designs/2020/0214/Support%20
the%202nd%20Microcode%20FV%20Flash%20Region.pdf
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1584
The flow of CPU feature initialization logic is:
1. BSP calls GetConfigDataFunc() for each thread/AP;
2. Each thread/AP calls SupportFunc() to detect its own capability;
3. BSP calls InitializeFunc() for each thread/AP.
There is a design gap in step #3. For a package scope feature that only
requires one thread of each package does the initialization operation,
what InitializeFunc() currently does is to do the initialization
operation only CPU physical location Core# is 0.
But in certain platform, Core#0 might be disabled in hardware level
which results the certain package scope feature isn't initialized at
all.
The patch adds a new field First to indicate the CPU's location in
its parent scope.
First.Package is set for all APs/threads under first package;
First.Core is set for all APs/threads under first core of each
package;
First.Thread is set for the AP/thread of each core.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1366
Commit b3c71b472d supported MSR setting
in different scopes. It added below macro:
CPU_FEATURE_THREAD_BEFORE
CPU_FEATURE_THREAD_AFTER
CPU_FEATURE_CORE_BEFORE
CPU_FEATURE_CORE_AFTER
CPU_FEATURE_PACKAGE_BEFORE
CPU_FEATURE_PACKAGE_AFTER
And it re-interpreted CPU_FEATURE_BEFORE as CPU_FEATURE_THREAD_BEFORE
and CPU_FEATURE_AFTER as CPU_FEATURE_THREAD_AFTER.
This patch retires CPU_FEATURE_BEFORE and CPU_FEATURE_AFTER
completely.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
The Platform Communications Channel Table (PCCT) was defined in:
ACPI Specification Version 5.0, Errata A - Published Nov. 13, 2013.
Starting from the Acpi50.h header file, there are definitions
describing the table but a macro with the table's signature is missing.
This patch adds the definition of Platform Communications Channel
Table's signature to the relevant ACPI header files.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2525
SafeUint64Mult() looks for 64-bit overflows and performs
several 32-bit multiples with 64-bit results to check for
all possible overflow conditions. IA32 builds using VS20xx
with optimizations enabled are producing a reference to
the _allmull intrinsic.
The fix is to use MultU64x64() instead of '*' for
these operations. These are safe because the inputs
are guaranteed to have the upper 32-bits clear, which
means MultU64x64() can never overflow with those inputs.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <bret.barkelew@microsoft.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2142
gAdvancedFeaturePkgTokenSpaceGuid.PcdSmbiosType0BiosInformation|
{0x0}|SMBIOS_TABLE_TYPE0|0x80010000 {
<HeaderFiles>
IndustryStandard/SmBios.h
<Packages>
MdePkg/MdePkg.dec
AdvancedFeaturePkg/AdvancedFeaturePkg.dec
}
If there's a PcdStructHF or PcdStructPKGs in StructPcd,
EccTool report error,IndexError: list index out of range
This patch is going to fix this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
NASM_INC contains the list of directory to include when using
the nasm assembler.
In nmake makefiles, a trailing backslash escapes the newline char
and replaces it with a space ' '. To have a literal trailing
backslash, it must be escaped with a caret '^'. This is not
necessary for GNU makefiles.
On windows platforms, for the NASM_INC macro, a caret escaping
a trailing a backslash was appended to the last included
folder regardless of the makefile type.
For instance, "/Include/" was replaced by "/Include/^\".
This is causing a build failure on windows platforms using
GNU makefiles since the caret '^' doesn't escape any chars in
GNU makefiles and is thus conserved.
"/Include^\" was replaced by "/Include\/" in nmake makefiles,
but remained "/Include/^\" in GNU makefiles.
This patch removes the caret '^' on the build using GNU makefiles.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The GenMake.py script tests the platform environment
to determine the type of makefile that needs to be
generated. If a Windows build host is detected, the
makefile generated is of Nmake type. Otherwise a
GNUmake type is generated.
Furthermore, the <TARGET>_<TAGNAME>_<ARCH>_MAKE_PATH
option in tools_def.template defines the make tool
to use.
E.g.: for VS2017 this is configured to use Nmake, cf.
*_VS2017_*_MAKE_PATH = DEF(VS2017_BIN_HOST)\nmake.exe
while for GCC5 it is setup to use GNU make.
*_GCC5_*_MAKE_PATH = DEF(GCC_HOST_PREFIX)make
This prevents using the GCC compiler toolchain on a
Windows build host.
To address this issue this patch introduces 2 factors
to determine the generated makefile output.
1. Platform -> to determine shell commands used
in makefile.
2. MakeTool -> to determine the type of makefile
that needs to be generated.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The header includes Physical Layer PCI Express Extended Capability
definitions based on section 7.7.6 of PCI Express Base Specification 5.0.
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 89164babec:
UefiCpuPkg/MpInitLib: don't shadow the microcode patch twice.
attempted to use 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
fields to avoid loading the microcode patches data into memory again in
the DXE phase.
However, the CPU_MP_DATA structure has members with type 'UINTN' or
pointer before the microcode patch related fields. This may cause issues
when PEI and DXE are of different archs (e.g. PEI - IA32, DXE - x64),
since the microcode patch related fields will have different offsets in
the CPU_MP_DATA structure.
Commit 88bd066166:
UefiCpuPkg/MpInitLib: Relocate microcode patch fields in CPU_MP_DATA
tried to resolve the above-mentioned issue by relocating the fields
'MicrocodePatchRegionSize' and 'MicrocodePatchAddress' before members with
different size between different archs. But it failed to take the case of
pre-built binaries (e.g. FSP) into consideration.
Binaries can be built when the code base had a different version of the
CPU_MP_DATA structure definition. This may cause issues when accessing
these microcode patch related fields, since their offsets are different
(between PEI phase in the binaries and DXE phase in current code
implementation).
This commit will use the newly introduced EDKII microcode patch HOB
instead for the DXE phase to get the information of the loaded microcode
patches data done in the PEI phase. And the 'MicrocodePatchRegionSize' and
'MicrocodePatchAddress' fields in CPU_MP_DATA will not be used to pass
information between phases.
For pre-built binaries, they can be classified into 3 types with regard to
the time when they are being built:
A. Before commit 89164babec
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
were not being used to skip microcode load in DXE)
For this case, the EDKII microcode patch HOB will not be produced. This
commit will load the microcode patches data again in DXE. Such behavior is
the same with the code base back then.
B. After commit 89164babec, before commit e1ed55738e
(In other words, 'MicrocodePatchRegionSize' and 'MicrocodePatchAddress'
being used to skip microcode load in DXE, but failed to work properly
between differnt archs.)
For this case, the EDKII microcode patch HOB will not be produced as well.
This commit will also load the microcode patches data again in DXE.
But since commit 89164babec failed to keep the detection and application
of microcode patches working properly in DXE after skipping the load, we
fall back to the origin behavior (that is to load the microcode patches
data again in DXE).
C. After commit e1ed55738e
(In other words, EDKII microcode patch HOB will be produced.)
For this case, it will have the same behavior with the BIOS built from
the current source codes.
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This reverts commit 88bd066166.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2465
Commit 88bd066166 relocates the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields in structure CPU_MP_DATA to ensure that
they can be properly passed between different architectures.
However, such change is not backward compatible with the scenario like
pre-existing binaries such as FSP. These binaries are built when the code
base has a different version of the CPU_MP_DATA structure definition. This
may cause issues when accessing the 'MicrocodePatchAddress' and
'MicrocodePatchRegionSize' fields, since their offsets are different
(between PEI phase in the FSP binaries and DXE phase in current code
implementation).
Cc: Michael Kubacki <michael.a.kubacki@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Check if global (in the scope of the DBG2 parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global (in the scope of the GTDT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global (in the scope of the IORT parser) pointers have been
successfully updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if the NumberOfPrivateResources, ProcessorTopologyStructureType
and ProcessorTopologyStructureLength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if the MadtInterruptControllerType and
MadtInterruptControllerLength pointers have been successfully updated
before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if SratRAType and SratRALength pointers have been successfully
updated before they are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
1. Check if the 'Number of System Localities' provided can be
represented in the SLIT table. The table 'Length' field is a 32-bit
value while the 'Number of System Localities' field is 64-bit long.
2. Check if the SLIT matrix fits in the table buffer. If N is the SLIT
locality count, then the matrix used to represent the localities is
N*N bytes long. The ACPI table length must be big enough to fit the
matrix.
3. Remove (now) redundant 64x64 bit multiplication.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if SlitSystemLocalityCount pointer has been successfully updated
before it is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if global pointers have been successfully updated before they
are used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Check if XsdtAddress pointer has been successfully updated before it
is used for further table parsing.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
For fields outside the buffer length provided, reset any pointers,
which were supposed to be updated by a ParseAcpi() function call to
NULL. This way one can easily validate if a pointer was successfully
updated.
The ParseAcpi() function parses the given ACPI table buffer by a
number of bytes which is a minimum of the buffer length and the length
described by ACPI_PARSER array. If the buffer length is shorter than
the array describing how to process the ACPI structure, then it is
possible that the ItemPtr inside ACPI_PARSER may not get updated or
initialized. This can lead to an error if the value pointed to by
ItemPtr is later used to control the parsing logic.
A typical example would be a 'number of elements' field in an ACPI
structure header which defines how many substructures of a given type
are present in the structure body. If the 'number of elements' field
is not parsed, we will have a dangling pointer which could cause a
problem later.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
ShellParametersProtocol::UpdateArgcArgv() can return
a EFI_INVALID_PARAMETER value. Document it.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
ShellParametersProtocol::ParseCommandLineToArgs() can return
a EFI_INVALID_PARAMETER value. Document it.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
FADT parser was checking for reduced ACPI flag incorrectly
leading to incorrect error message if FIRMWARE_CTRL and
X_FIRMWARE_CTRL are both 0.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Fix various typos in comments and documentation.
When "VbeShim.asm" is modified, we have to re-run "VbeShim.sh"
to update "VbeShim.h".
The string modified by this patch is only used when the DEBUG
macro (at the top of the file) is commented out. Since the
string is not referenced, NASM eliminates it, resulting in
the same byte array content in "VbeShim.h".
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Antoine Coeur <coeur@gmx.fr>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200207010831.9046-58-philmd@redhat.com>
The DxeTpmMeasureBootHandler and DxeTpm2MeasureBootHandler handlers
are SECURITY2_FILE_AUTHENTICATION_HANDLER prototype. This prototype
can not return EFI_INVALID_PARAMETER.
The prototype documentation states it returns EFI_ACCESS_DENIED if:
"The file specified by File and FileBuffer did not authenticate,
and the platform policy dictates that the DXE Foundation may not
use File."
Correct the documentation, and add a early check, returning
EFI_ACCESS_DENIED when File is NULL.
Noticed while reviewing commit 6d57592740.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Increase length of path that can be read from system from 200 to 400 to
allow for longer build paths.
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
* DSC in root of package file to perform a package
build of the UnitTestFrameworkPkg and build sample
unit test for all supported target environments.
* DSC file in Test directory to build the sample
unit test for the host environment.
* UnitTestFrameworkPkgTarget.dsc.inc - DSC include
file to !include when building unit tests for
target environments.
* UnitTestFrameworkPkgHost.dsc.inc - DSC include
file to !include when building unit tests for
target environments.
* YAML file with set of CI checks to perform on UnitTestFrameworkPkg.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Sean Brogan <sean.brogan@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add the following library instances that are used to
build unit tests for host and target environments.
* CmockaLib with cmocka submodule to:
https://git.cryptomilk.org/projects/cmocka.git
* DebugLibPosix - Instance of DebugLib based on POSIX
APIs (e.g. printf).
* MemoryAllocationLibPosix - Instance of MemoryAllocationLib
based on POSIX APIs (e.g. malloc/free).
* UnitTestBootLibNull - Null instance of the UnitTestBootLib
* UnitTestBootLibUsbClass - UnitTestBootLib instances that
supports setting boot next to a USB device.
* UnitTestLib - UnitTestLib instance that is designed to work
with PEI, DXE, SMM, and UEFI Shell target environments.
* UnitTestLibCmocka - UintTestLib instance that uses cmocka
APIs and can only be use in a host environment.
* UnitTestPersistenceLibNull - Null instance of the
UnitTestPersistenceLib
* UnitTestPersistenceLibSimpleFileSystem - UnitTestPersistenceLib
instance that can safe the unit test framework state to a
media device that supports the UEFI Simple File System
Protocol.
* UnitTestResultReportLibConOut - UnitTestResultReportLib
instance that sends report results to the UEFI standard
output console.
* UnitTestResultReportLibDebugLib - UnitTestResultReportLib
instance that sends report results to a DebugLib using
DEBUG() macros.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add public interfaces for use by unit test implementations.
* Include path to cmocka library interfaces.
* PcdUnitTestLogLevel to set the unit test logging message
level to filter log messages.
Add private interfaces that are used by UnitTestLib
implementations.
* [Private] UnitTestBootLib - Set boot next to continue unit
tests across a reboot.
* [Private] UnitTestPersistenceLib - Save unit test framework
state to a persistent storage device.
* [Private] UnitTestResultLib - Output unit test results to a
console device.
* [Private] UnitTestFrameworkTypes.h - Internal structures
used by UnitTestLib implementations to keep track if unit
test frameworks, unit test suites, and unit tests along with
the serialized storage format to save a unit test framework
state to persistent storage.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2505
Add UnitTestLib class to MdePkg that provides services
and macros to implement unit tests. These services and
macros support the following features:
* Create a Unit Test Framework
* Add a Unit Test Suite to a Unit Test Framework
+ Support optional step that executes before a Unit
Test Suite is started.
+ Support optional step that executes after a Unit
Test Suite is finished.
* Add a Unit Test to a Unit Test Suite
+ Support optional step that executes before a Unit
Test is started.
+ Support optional step that executes after a Unit
Test is finished.
* Run all unit tests added to a Unit Test Framework
* Save Unit Test Framework state to persistent storage
* Support assertion checks in a unit test for TRUE, FALSE,
EQUAL, MEM_EQUAL, NOT_EFI_ERROR, STATUS_EQUAL, and NOT_NULL.
* Support generation of log messages at ERROR, WARN, INFO,
and VERBOSE levels.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bret Barkelew <Bret.Barkelew@microsoft.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add Crypto library instances and modules that consume/produce
the EDK II Crypto Protocols/PPIs to the CryptoPkg DSC file.
The default build of CryptoPkg performs a package verification
build.
The CRYPTO_SERVICES define is added that supports the following
settings.
* PACKAGE - Package verification build of all components. Null
versions of libraries are used to minimize build times.
* ALL - Build PEIM, DXE, and SMM drivers. Protocols and PPIs
publish all services.
* NONE - Build PEIM, DXE, and SMM drivers. Protocols and PPIs
publish no services. Used to verify compiler/linker
optimizations are working correctly.
* MIN_PEI - Build PEIM with PPI that publishes minimum required
services.
* MIN_DXE_MIN_SMM - Build DXE and SMM drivers with Protocols that publish
minimum required services.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add the CryptoPei, CryptoDxe, and CryptoSmm modules that produce
EDK II Crypto Protocols/PPIs that provide the same services as
the BaseCryptLib class.
In order to optimize the size of CryptoPei, CryptoDxe, and
CryptoSmm modules for a specific platform, the FixedAtBuild
PCD gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable
is used to determine if a specific service is enabled or
disabled. If a service is enabled, then a call is made to
the BaseCryptLib service. If the service is disabled, then
a DEBUG() message and ASSERT() are performed and a default
return value is returned. This provides simple detection
of a service that is disabled but is used by another module
when DEBUG()/ASSERT() macros are enabled.
The use of a FixedAtBuild PCD is required so the compiler
and linker know each services enable/disable setting at
build time and allows disabled services to be optimized away.
CryptoPei supports both pre-mem and post-mem use cases.
If CryptoPei is initially dispatched pre-mmem, the the
register for shadow service is used so the Crypto PPI can
be reinstalled post-mem.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2420
Based on the following package with changes to merge into
CryptoPkg.
https://github.com/microsoft/mu_plus/tree/dev/201908/SharedCryptoPkg
Add the EDK II Crypto Protocol, EDK II SMM Crypto Protocol
and EDK II Crypto PPI that provide the same services as the
BaseCryptLib. One additional GetVersion() services is provided
to support backward compatible extensions to these new
Protocols/PPIs if new services are added to BaseCryptLib in the
future. The EDK II Crypto Protocols/PPIs are located in a
private directory so they are only available CryptoPkg components.
In order to optimize the size of modules that produce the
EDK II Crypto Protocols/PPIs define a FixedAtBuild PCD
gEfiCryptoPkgTokenSpaceGuid.PcdCryptoServiceFamilyEnable.
This PCD is type VOID* and is associated with the structure
PCD_CRYPTO_SERVICE_FAMILY_ENABLE. This structure contains
bitfields and unions that allow a platform DSC files to
enable/disable entire families of services or enable/disable
individual services in the produced EDK II Crypto
Protocols/PPIs.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2001
For S3BootScriptLib APIs:
S3BootScriptSaveIoWrite
S3BootScriptSaveMemWrite
S3BootScriptSavePciCfgWrite
S3BootScriptSavePciCfg2Write
S3BootScriptSaveSmbusExecute
S3BootScriptSaveInformation
S3BootScriptSaveInformationAsciiString
S3BootScriptLabel (happen in S3BootScriptLabelInternal())
possible numeric truncations will happen that may lead to S3 boot script
entry with improper size being returned to store the boot script data.
This commit will add checks to prevent this kind of issue.
Please note that the remaining S3BootScriptLib APIs:
S3BootScriptSaveIoReadWrite
S3BootScriptSaveMemReadWrite
S3BootScriptSavePciCfgReadWrite
S3BootScriptSavePciCfg2ReadWrite
S3BootScriptSaveStall
S3BootScriptSaveDispatch2
S3BootScriptSaveDispatch
S3BootScriptSaveMemPoll
S3BootScriptSaveIoPoll
S3BootScriptSavePciPoll
S3BootScriptSavePci2Poll
S3BootScriptCloseTable
S3BootScriptExecute
S3BootScriptMoveLastOpcode
S3BootScriptCompare
are not affected by such numeric truncation.
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Current UpdateCapsule service will reject all non-reset capsule images and
return EFI_OUT_OF_RESOURCE if the system is at runtime. This will block a
platform CapsuleLib from implementing ProcessCapsuleImage() with runtime
capsule processing capability.
This patch removes this restriction. The change is controled by a feature
PCD PcdSupportProcessCapsuleAtRuntime, and the default value is FALSE
which means not enable this feature.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2501
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2496
Reduce the build and env dependencies for the Structured PCD
application by removing the dependency on Common.lib that
is only built when BaseTools is built which does not
happen if pre-compiled BaseToools are used. Change the
makefile for the Structure PCD application to build all
files from sources which adds PcdValueCommon.c to the
makefile. Also remove PcdValueCommon.c from Common.lib.
With the change to the makefile for the Structured PCD
application, multiple C files are compiled. Only
PcdValueInit.c contains the extra information expected
by the error/warning message parser. Only parse the
DSC line number into an error message if there is an
error/warning in PcdValueInit.c. Errors/warnings in
other files should be passed through. This fixes a build
failure with no useful log information that was observed
when there was a compiler error in PcdValueCommon.c.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Before writing data to FIFO, wait for the serial port to be ready,
to make sure both the transmit FIFO and shift register empty. Code
comment was saying the right thing but code was missing a check.
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
The "-tc" option of the iasl compiler allows to generate a
.hex file containing a C array storing AML bytecode.
An online discussion suggested that this "-tc" option
was specific to the iasl compiler and it shouldn't be relied
on. This conversation is available at:
https://edk2.groups.io/g/devel/topic/39786201#49659
A way to address this issue is to implement a compiler
independent script that takes an AML file as input, and
generates a .hex file.
This patch implements a Python script that converts an AML
file to a .hex file, containing a C array storing AML bytecode.
This scipt has been tested with the AML output from the
following compilers supported by the EDKII implementation:
* Intel ASL compiler
* Microsoft ASL compiler
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
We check the author/committer name/email are properly displayed
since commits 8ffa47fb3ab..c0328cf3803. However if PatchCheck.py
uses the mailmap, it will check sanitized names/emails.
Use the --no-use-mailmap option so PatchCheck.py will check
unsanitized input.
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2498
Commit fd30b00707 updated the logic in function MicrocodeDetect() that
will directly use the CPUID and PlatformID information from the 'CpuData'
field in the CPU_MP_DATA structure, instead of collecting these
information for each processor via AsmCpuid() and AsmReadMsr64() calls
respectively.
At that moment, this approach worked fine for APs. Since:
a) When the APs are waken up for the 1st time (1st MpInitLibInitialize()
entry at PEI phase), the function InitializeApData() will be called for
each AP and the CPUID and PlatformID information will be collected.
b) During the 2nd entry of MpInitLibInitialize() at DXE phase, when the
APs are waken up again, the function InitializeApData() will not be
called, which means the CPUID and PlatformID information will not be
collected. However, the below logics in MicrocodeDetect() function:
CurrentRevision = GetCurrentMicrocodeSignature ();
IsBspCallIn = (ProcessorNumber == (UINTN)CpuMpData->BspNumber) ? TRUE : FALSE;
if (CurrentRevision != 0 && !IsBspCallIn) {
//
// Skip loading microcode if it has been loaded successfully
//
return;
}
will ensure that the microcode detection and application will be
skipped due to the fact that such process has already been done in the
PEI phase.
But after commit 396e791059, which removes the above skip loading logic,
the CPUID and PlatformID information on APs will be used upon the 2nd
entry of the MpInitLibInitialize(). But since the CPUID and PlatformID
information has not been collected, it will bring issue to the microcode
detection process.
This commit will update the logic in MicrocodeDetect() back to always
collecting the CPUID and PlatformID information explicitly.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
During normal boot, when EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL is installed
by platform BDS, the SMM IPL locks SMRAM (TSEG) through
EFI_SMM_ACCESS2_PROTOCOL.Lock(). See SmmIplReadyToLockEventNotify() in
"MdeModulePkg/Core/PiSmmCore/PiSmmIpl.c".
During S3 resume, S3Resume2Pei locks SMRAM (TSEG) through
PEI_SMM_ACCESS_PPI.Lock(), before executing the boot script. See
S3ResumeExecuteBootScript() in
"UefiCpuPkg/Universal/Acpi/S3Resume2Pei/S3Resume.c".
Those are precisely the places where the SMRAM at the default SMBASE
should be locked too. Add such an action to SmramAccessLock().
Notes:
- The SMRAM at the default SMBASE doesn't support the "closed and
unlocked" state (and so it can't be closed without locking it, and it
cannot be opened after closing it).
- The SMRAM at the default SMBASE isn't (and shouldn't) be exposed with
another EFI_SMRAM_DESCRIPTOR in the GetCapabilities() members of
EFI_SMM_ACCESS2_PROTOCOL / PEI_SMM_ACCESS_PPI. That's because the SMRAM
in question is not "general purpose"; it's only QEMU's solution to
protect the initial SMI handler from the OS, when a VCPU is hot-plugged.
Consequently, the state of the SMRAM at the default SMBASE is not
reflected in the "OpenState" / "LockState" fields of the protocol and
PPI.
- An alternative to extending SmramAccessLock() would be to register an
EFI_DXE_SMM_READY_TO_LOCK_PROTOCOL notify in SmmAccess2Dxe (for locking
at normal boot), and an EDKII_S3_SMM_INIT_DONE_GUID PPI notify in
SmmAccessPei (for locking at S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-10-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When OVMF runs in a SEV guest, the initial SMM Save State Map is
(1) allocated as EfiBootServicesData type memory in OvmfPkg/PlatformPei,
function AmdSevInitialize(), for preventing unintended information
sharing with the hypervisor;
(2) decrypted in AmdSevDxe;
(3) re-encrypted in OvmfPkg/Library/SmmCpuFeaturesLib, function
SmmCpuFeaturesSmmRelocationComplete(), which is called by
PiSmmCpuDxeSmm right after initial SMBASE relocation;
(4) released to DXE at the same location.
The SMRAM at the default SMBASE is a superset of the initial Save State
Map. The reserved memory allocation in InitializeRamRegions(), from the
previous patch, must override the allocating and freeing in (1) and (4),
respectively. (Note: the decrypting and re-encrypting in (2) and (3) are
unaffected.)
In AmdSevInitialize(), only assert the containment of the initial Save
State Map, in the larger area already allocated by InitializeRamRegions().
In SmmCpuFeaturesSmmRelocationComplete(), preserve the allocation of the
initial Save State Map into OS runtime, as part of the allocation done by
InitializeRamRegions(). Only assert containment.
These changes only affect the normal boot path (the UEFI memory map is
untouched during S3 resume).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-9-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The 128KB SMRAM at the default SMBASE will be used for protecting the
initial SMI handler for hot-plugged VCPUs. After platform reset, the SMRAM
in question is open (and looks just like RAM). When BDS signals
EFI_DXE_MM_READY_TO_LOCK_PROTOCOL (and so TSEG is locked down), we're
going to lock the SMRAM at the default SMBASE too.
For this, we have to reserve said SMRAM area as early as possible, from
components in PEI, DXE, and OS runtime.
* QemuInitializeRam() currently produces a single resource descriptor HOB,
for exposing the system RAM available under 1GB. This occurs during both
normal boot and S3 resume identically (the latter only for the sake of
CpuMpPei borrowing low RAM for the AP startup vector).
But, the SMRAM at the default SMBASE falls in the middle of the current
system RAM HOB. Split the HOB, and cover the SMRAM with a reserved
memory HOB in the middle. CpuMpPei (via MpInitLib) skips reserved memory
HOBs.
* InitializeRamRegions() is responsible for producing memory allocation
HOBs, carving out parts of the resource descriptor HOBs produced in
QemuInitializeRam(). Allocate the above-introduced reserved memory
region in full, similarly to how we treat TSEG, so that DXE and the OS
avoid the locked SMRAM (black hole) in this area.
(Note that these allocations only occur on the normal boot path, as they
matter for the UEFI memory map, which cannot be changed during S3
resume.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-8-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The permanent PEI RAM that is published on the normal boot path starts
strictly above MEMFD_BASE_ADDRESS (8 MB -- see the FDF files), regardless
of whether PEI decompression will be necessary on S3 resume due to
SMM_REQUIRE. Therefore the normal boot permanent PEI RAM never overlaps
with the SMRAM at the default SMBASE (192 KB).
The S3 resume permanent PEI RAM is strictly above the normal boot one.
Therefore the no-overlap statement holds true on the S3 resume path as
well.
Assert the no-overlap condition commonly for both boot paths in
PublishPeiMemory().
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-7-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In Intel datasheet 316966-002 (the "q35 spec"), Table 5-1 "DRAM Controller
Register Address Map (D0:F0)" leaves the byte register at config space
offset 0x9C unused.
On QEMU's Q35 board, for detecting the "SMRAM at default SMBASE" feature,
firmware is expected to write MCH_DEFAULT_SMBASE_QUERY (0xFF) to offset
MCH_DEFAULT_SMBASE_CTL (0x9C), and read back the register. If the value is
MCH_DEFAULT_SMBASE_IN_RAM (0x01), then the feature is available, and the
range mentioned below is open (accessible to code running outside of SMM).
Then, once firmware writes MCH_DEFAULT_SMBASE_LCK (0x02) to the register,
the MCH_DEFAULT_SMBASE_SIZE (128KB) range at 0x3_0000 (SMM_DEFAULT_SMBASE)
gets closed and locked down, and the register becomes read-only. The area
is reopened, and the register becomes read/write, at platform reset.
Add the above-listed macros to "Q35MchIch9.h".
(There are some other unused offsets in Table 5-1; for example we had
scavenged 0x50 for implementing the extended TSEG feature. 0x9C is the
first byte-wide register standing in isolation after 0x50.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-4-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
For supporting VCPU hotplug with SMM enabled/required, QEMU offers the
(dynamically detectable) feature called "SMRAM at default SMBASE". When
the feature is enabled, the firmware can lock down the 128 KB range
starting at the default SMBASE; that is, the [0x3_0000, 0x4_FFFF]
interval. The goal is to shield the very first SMI handler of the
hotplugged VCPU from OS influence.
Multiple modules in OVMF will have to inter-operate for locking down this
range. Introduce a dynamic PCD that will reflect the feature (to be
negotiated by PlatformPei), for coordination between drivers.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1512
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Message-Id: <20200129214412.2361-2-lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=2494
When using structured PCDs, a C application is auto generated
to fill in the structured PCD value. The C application uses
the standard include files <stdio.h>, <stdlib.h>, and <string.h>.
This C application also supports include paths from package DEC
files when a structured PCD declaration provides a <Packages>
list. The complete list of include paths are -I options for
include paths from package DEC files and the compiler's standard
include paths.
-I include paths are higher priority than the standard include
paths. If the -I included paths from package DEC files contain
<stdio.h>, <stdlib.h>, or <string.h> the wrong include files are
used to compile the C application for the structured PCD value.
Update GenerateByteArrayValue() to skip a package DEC include
paths that contain <stdio.h>, <stdlib.h>, or <string.h>.
Build failures were observed when adding a structured PCD to
CryptoPkg. CryptoPkg contains <stdio.h>, <stdlib.h>, and
<string.h> in the path CryptoPkg/Library/Include to support
building Open SSL. The Library/Include path is listed as a
private include path in CryptoPkg.dec. Without this change, the
standard include files designed to support build OpenSLL are
used to build the structured PCD C application, and that build
fails.
Other packages that provide a standard C lib or a gasket for
a subset of the standard C lib will run into this same issue
if they also define and use a Structured PCD. So this issue
is not limited to the CryptoPkg.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The "--function-context" ("-W") option of git-diff displays the entire
body of a modified function, not just small modified hunks within the
function. It is useful for reviewers when the code changes to the function
are small, but they could affect, or depend on, control flow that is far
away in the same function.
Of course, the size of the displayed context can be controlled with the
"-U" option anyway, but such fixed-size contexts are usually either too
small, or too large, in the above scenario.
It turns out that "--function-context" does not work correctly for C
source files in edk2. In particular, labels for the goto instruction
(which the edk2 coding style places in the leftmost column) appear to
terminate "--function-context".
The "git" utility contains built-in hunk header patterns for the C and C++
languages. However, they do not take effect in edk2 because we don't
explicitly assign the "cpp" git-diff driver to our C files. The
gitattributes(5) manual explains that this is required:
> There are a few built-in patterns to make this easier, and
> tex is one of them, so you do not have to write the above in
> your configuration file (you still need to enable this with
> the attribute mechanism, via .gitattributes). The following
> built in patterns are available:
>
> [...]
>
> * cpp suitable for source code in the C and C++
> languages.
The key statement is the one in parentheses.
Grab the suffix lists from the [C-Code-File] and [Acpi-Table-Code-File]
sections of "BaseTools/Conf/build_rule.template", add "*.h" and "*.H", and
mark those as belonging to the "cpp" git-diff driver.
This change has a dramatic effect on the following command, for example:
$ git show -W 2ef0c27cb8
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200120094245.9010-1-lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif@nuviainc.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In DxeImageVerificationHandler(), we should return EFI_SECURITY_VIOLATION
for a rejected image only if the platform sets
DEFER_EXECUTE_ON_SECURITY_VIOLATION as the policy for the image's source.
Otherwise, EFI_ACCESS_DENIED must be returned.
Right now, EFI_SECURITY_VIOLATION is returned for all rejected images,
which is wrong -- it causes LoadImage() to hold on to rejected images (in
untrusted state), for further platform actions. However, if a platform
already set DENY_EXECUTE_ON_SECURITY_VIOLATION, the platform will not
expect the rejected image to stick around in memory (regardless of its
untrusted state).
Therefore, adhere to the platform policy in the return value of the
DxeImageVerificationHandler() function.
Furthermore, according to "32.4.2 Image Execution Information Table" in
the UEFI v2.8 spec, and considering that edk2 only supports (AuditMode==0)
at the moment:
> When AuditMode==0, if the image's signature is not found in the
> authorized database, or is found in the forbidden database, the image
> will not be started and instead, information about it will be placed in
> this table.
we have to store an EFI_IMAGE_EXECUTION_INFO record in both the "defer"
case and the "deny" case. Thus, the AddImageExeInfo() call is not being
made conditional on (Policy == DEFER_EXECUTE_ON_SECURITY_VIOLATION); the
documentation is updated instead.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Fixes: 5db28a6753
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-12-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
It makes no sense to call AddImageExeInfo() with (Signature == NULL) and
(SignatureSize > 0). AddImageExeInfo() does not crash in such a case -- it
avoids the CopyMem() call --, but it creates an invalid
EFI_IMAGE_EXECUTION_INFO record. Namely, the
"EFI_IMAGE_EXECUTION_INFO.InfoSize" field includes "SignatureSize", but
the actual signature bytes are not filled in.
Document and ASSERT() this condition in AddImageExeInfo().
In DxeImageVerificationHandler(), zero out "SignatureListSize" if we set
"SignatureList" to NULL due to AllocateZeroPool() failure.
(Another approach could be to avoid calling AddImageExeInfo() completely,
in case AllocateZeroPool() fails. Unfortunately, the UEFI v2.8 spec does
not seem to state clearly whether a signature is mandatory in
EFI_IMAGE_EXECUTION_INFO, if the "Action" field is
EFI_IMAGE_EXECUTION_AUTH_SIG_FAILED or EFI_IMAGE_EXECUTION_AUTH_SIG_FOUND.
For now, the EFI_IMAGE_EXECUTION_INFO addition logic is not changed; we
only make sure that the record we add is not malformed.)
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-11-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
Inside the "for" loop that scans the signatures of the image, we call
HashPeImageByType(), and assign its return value to "Status".
Beyond the immediate retval check, this assignment is useless (never
consumed). That's because a subsequent access to "Status" may only be one
of the following:
- the "Status" assignment when we call HashPeImageByType() in the next
iteration of the loop,
- the "Status = EFI_ACCESS_DENIED" assignment right after the final
"IsVerified" check.
To make it clear that the assignment is only useful for the immediate
HashPeImageByType() retval check, introduce a specific helper variable,
called "HashStatus".
This patch is a no-op, functionally.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-5-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
The PeCoffLoaderGetImageInfo() function may return various error codes,
such as RETURN_INVALID_PARAMETER and RETURN_UNSUPPORTED.
Such error values should not be assigned to our "Status" variable in the
DxeImageVerificationHandler() function, because "Status" generally stands
for the main exit value of the function. And
SECURITY2_FILE_AUTHENTICATION_HANDLER functions are expected to return one
of EFI_SUCCESS, EFI_SECURITY_VIOLATION, and EFI_ACCESS_DENIED only.
Introduce the "PeCoffStatus" helper variable for keeping the return value
of PeCoffLoaderGetImageInfo() internal to the function. If
PeCoffLoaderGetImageInfo() fails, we'll jump to the "Done" label with
"Status" being EFI_ACCESS_DENIED, inherited from the top of the function.
Note that this is consistent with the subsequent PE/COFF Signature check,
where we jump to the "Done" label with "Status" having been re-set to
EFI_ACCESS_DENIED.
As a consequence, we can at once remove the
Status = EFI_ACCESS_DENIED;
assignment right after the "PeCoffStatus" check.
This patch does not change the control flow in the function, it only
changes the "Status" outcome from API-incompatible error codes to
EFI_ACCESS_DENIED, under some circumstances.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2129
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20200116190705.18816-4-lersek@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
[lersek@redhat.com: push with Mike's R-b due to Chinese New Year
Holiday: <https://edk2.groups.io/g/devel/message/53429>; msgid
<d3fbb76dabed4e1987c512c328c82810@intel.com>]
MaxCpuCountInitialization() currently handles the following options:
(1) QEMU does not report the boot CPU count (FW_CFG_NB_CPUS is 0)
In this case, PlatformPei makes MpInitLib enumerate APs up to the
default PcdCpuMaxLogicalProcessorNumber value (64) minus 1, or until
the default PcdCpuApInitTimeOutInMicroSeconds (50,000) elapses.
(Whichever is reached first.)
Time-limited AP enumeration had never been reliable on QEMU/KVM, which
is why commit 45a70db3c3 strated handling case (2) below, in OVMF.
(2) QEMU reports the boot CPU count (FW_CFG_NB_CPUS is nonzero)
In this case, PlatformPei sets
- PcdCpuMaxLogicalProcessorNumber to the reported boot CPU count
(FW_CFG_NB_CPUS, which exports "PCMachineState.boot_cpus"),
- and PcdCpuApInitTimeOutInMicroSeconds to practically "infinity"
(MAX_UINT32, ~71 minutes).
That causes MpInitLib to enumerate exactly the present (boot) APs.
With CPU hotplug in mind, this method is not good enough. Because,
using QEMU terminology, UefiCpuPkg expects
PcdCpuMaxLogicalProcessorNumber to provide the "possible CPUs" count
("MachineState.smp.max_cpus"), which includes present and not present
CPUs both (with not present CPUs being subject for hot-plugging).
FW_CFG_NB_CPUS does not include not present CPUs.
Rewrite MaxCpuCountInitialization() for handling the following cases:
(1) The behavior of case (1) does not change. (No UefiCpuPkg PCDs are set
to values different from the defaults.)
(2) QEMU reports the boot CPU count ("PCMachineState.boot_cpus", via
FW_CFG_NB_CPUS), but not the possible CPUs count
("MachineState.smp.max_cpus").
In this case, the behavior remains unchanged.
The way MpInitLib is instructed to do the same differs however: we now
set the new PcdCpuBootLogicalProcessorNumber to the boot CPU count
(while continuing to set PcdCpuMaxLogicalProcessorNumber identically).
PcdCpuApInitTimeOutInMicroSeconds becomes irrelevant.
(3) QEMU reports both the boot CPU count ("PCMachineState.boot_cpus", via
FW_CFG_NB_CPUS), and the possible CPUs count
("MachineState.smp.max_cpus").
We tell UefiCpuPkg about the possible CPUs count through
PcdCpuMaxLogicalProcessorNumber. We also tell MpInitLib the boot CPU
count for precise and quick AP enumeration, via
PcdCpuBootLogicalProcessorNumber. PcdCpuApInitTimeOutInMicroSeconds is
irrelevant again.
This patch is a pre-requisite for enabling CPU hotplug with SMM_REQUIRE.
As a side effect, the patch also enables S3 to work with CPU hotplug at
once, *without* SMM_REQUIRE.
(Without the patch, S3 resume fails, if a CPU is hot-plugged at OS
runtime, prior to suspend: the FW_CFG_NB_CPUS increase seen during resume
causes PcdCpuMaxLogicalProcessorNumber to increase as well, which is not
permitted.
With the patch, PcdCpuMaxLogicalProcessorNumber stays the same, namely
"MachineState.smp.max_cpus". Therefore, the CPU structures allocated
during normal boot can accommodate the CPUs at S3 resume that have been
hotplugged prior to S3 suspend.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191022221554.14963-4-lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In v1.5.0, QEMU's "pc" (i440fx) board gained a "CPU present bitmap"
register block. In v2.0.0, this was extended to the "q35" board.
In v2.7.0, a new (read/write) register interface was laid over the "CPU
present bitmap", with an option for the guest to switch the register block
to the new (a.k.a. modern) interface.
Both interfaces are documented in "docs/specs/acpi_cpu_hotplug.txt" in the
QEMU tree.
Add macros for a minimal subset of the modern interface, just so we can
count the possible CPUs (as opposed to boot CPUs) in a later patch in this
series.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191022221554.14963-3-lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=2484https://bugzilla.tianocore.org/show_bug.cgi?id=2485
Update PatchCheck to not enforce no tabs and not enforce CR/LF
line endings for .gitmodules files. These files are updated by
git when a git submodule command is used and the updates by git
use tab characters and LF line endings.
Also update patch check to not enforce CR/LF line endings for
patch lines that create a submodule directory. These patch
lines use LF line endings. The git submodule directory is
added as a new file with attributes 160000 that can be detected
by looking for the pattern "new file mode 160000".
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1792
HmacXxxInit() is supposed to be initialize user supplied buffer as HMAC
context, as well as user supplied key. Currently it has no real use cases.
Due to BZ1792, the user has no way to get correct size of context buffer
after it's fixed, and then cannot make use of HmacXxxInit to initialize
it.
So it's decided to replace it with HmacXxxSetKey to keep the functionality
of supplying a key to HMAC, but drop all other initialization works. The
user can still get HMAC context via HmacXxxNew interface, which hides the
details about the context.
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2474
Previous commit d786a17232:
UefiCpuPkg/MpInitLib: Reduce the size when loading microcode patches
Removed the below assignments for the 'InitFlag' field of CPU_MP_DATA
structure in function MpInitLibInitialize() when APs are waken up to do
some initialize sync:
CpuMpData->InitFlag = ApInitReconfig;
...
CpuMpData->InitFlag = ApInitDone;
The above commit mistakenly assumed the 'InitFlag' field will have a value
of 'ApInitDone' when the APs have been successfully waken up before. And
since there is no explicit comparision for the 'InitFlag' field with the
'ApInitReconfig' value. The commit removed those assignments.
However, under some cases (e.g. when variable OldCpuMpData is not NULL,
which means function CollectProcessorCount() will not be called), removing
the above assignments will left the 'InitFlag' field being uninitialized
with a value of 0, which is a invalid value for the type of 'InitFlag'
(AP_INIT_STATE).
It may potentially cause the WakeUpAP() function to run some unnecessary
codes when the APs have been successfully waken up before:
if (CpuMpData->WakeUpByInitSipiSipi ||
CpuMpData->InitFlag != ApInitDone) {
ResetVectorRequired = TRUE;
AllocateResetVector (CpuMpData);
FillExchangeInfoData (CpuMpData);
SaveLocalApicTimerSetting (CpuMpData);
}
This commit will address the above-mentioned issue.
Test done:
* OS boot on a real platform with multi processors
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2421
Capsule Dependency is an incremental change of Fmp Capsule Update. The
capsule format is extended to include a set of binary encoded dependency
expression. The dependency expression is signed together with the Fmp
payload and evaluated before update is applied.
This feature is defined in UEFI Spec 2.8.
The dependency evaluation has two steps:
1. Validate platform existing Fmp images' version satisfy the dependency
expression in capsule image.
2. Validate the capsule image version satisfy all the platform existing
Fmp image's dependency expression.
If the dependency expression evaluates to FALSE, then the capsule update
fails and last attempt status is set to
LAST_ATTEMPT_STATUS_ERROR_UNSATISFIED_DEPENDENCIES.
The dependency saving and getting is FmpDeviceLib implementation scope.
The parameter "Image" of FmpDeviceSetImage and FmpDeviceGetImage function
is extended to contain the dependency. The layout:
+--------------------------+
| Dependency Op-codes |
+--------------------------+
| Fmp Payload Image |
+--------------------------+
1. FmpDeviceSetImage is responsible for retrieving the dependency from the
parameter "Image" and saving it to a protected storage.
2. FmpDeviceGetImage is responsible for retrieving the dependency from the
storage where FmpDeviceSetImage saves dependency and combining it with the
Fmp Payload Image into one buffer which is returned to the caller. This
dependency will be populated into EFI_FIRMWARE_IMAGE_DESCRIPTOR and used
for dependency evaluation.
3. FmpDeviceGetAttributes must set the bit IMAGE_ATTRIBUTE_DEPENDENCY to
indicate the Fmp device supports Fmp Capsule Dependency feature.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2421
Add new definitions for Fmp Capsule dependency in UEFI Spec 2.8.
1. Extend the Last Attempt Status with a value to indicate the firmware
update fails with unsatisfied dependencies.
2. Add the definition of dependency expression op-codes.
3. Add the definition of EFI_FIRMWARE_IMAGE_DEP which is an array of FMP
dependency expression op-codes.
4. Extend the EFI_FIRMWARE_IMAGE_DESCRIPTOR with a pointer to the array of
FMP dependency expression op-codes.
5. Extend the Image Attribute Definitions with IMAGE_ATTRIBUTE_DEPENDENCY
to indicate that there is and EFI_FIRMWARE_IMAGE_DEP section associated
with the image.
6. Update EFI_FIRMWARE_IMAGE_DESCRIPTOR_VERSION to 4.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 4eee0cc7cc ("UefiCpuPkg/PiSmmCpu: Enable 5 level paging when
CPU supports", 2019-07-12), the Page Directory Entry setting was regressed
(corrupted) when splitting a 2MB page to 512 4KB pages, in the
InitPaging() function.
Consider the following hunk, displayed with
$ git show --function-context --ignore-space-change 4eee0cc7cc
> //
> // If it is 2M page, check IsAddressSplit()
> //
> if (((*Pd & IA32_PG_PS) != 0) && IsAddressSplit (Address)) {
> //
> // Based on current page table, create 4KB page table for split area.
> //
> ASSERT (Address == (*Pd & PHYSICAL_ADDRESS_MASK));
>
> Pt = AllocatePageTableMemory (1);
> ASSERT (Pt != NULL);
>
> + *Pd = (UINTN) Pt | IA32_PG_RW | IA32_PG_P;
> +
> // Split it
> - for (PtIndex = 0; PtIndex < SIZE_4KB / sizeof(*Pt); PtIndex++) {
> - Pt[PtIndex] = Address + ((PtIndex << 12) | mAddressEncMask | PAGE_ATTRIBUTE_BITS);
> + for (PtIndex = 0; PtIndex < SIZE_4KB / sizeof(*Pt); PtIndex++, Pt++) {
> + *Pt = Address + ((PtIndex << 12) | mAddressEncMask | PAGE_ATTRIBUTE_BITS);
> } // end for PT
> *Pd = (UINT64)(UINTN)Pt | mAddressEncMask | PAGE_ATTRIBUTE_BITS;
> } // end if IsAddressSplit
> } // end for PD
First, the new assignment to the Page Directory Entry (*Pd) is
superfluous. That's because (a) we set (*Pd) after the Page Table Entry
loop anyway, and (b) here we do not attempt to access the memory starting
at "Address" (which is mapped by the original value of the Page Directory
Entry).
Second, appending "Pt++" to the incrementing expression of the PTE loop is
a bug. It causes "Pt" to point *right past* the just-allocated Page Table,
once we finish the loop. But the PDE assignment that immediately follows
the loop assumes that "Pt" still points to the *start* of the new Page
Table.
The result is that the originally mapped 2MB page disappears from the
processor's view. The PDE now points to a "Page Table" that is filled with
garbage. The random entries in that "Page Table" will cause some virtual
addresses in the original 2MB area to fault. Other virtual addresses in
the same range will no longer have a 1:1 physical mapping, but be
scattered over random physical page frames.
The second phase of the InitPaging() function ("Go through page table and
set several page table entries to absent or execute-disable") already
manipulates entries in wrong Page Tables, for such PDEs that got split in
the first phase.
This issue has been caught as follows:
- OVMF is started with 2001 MB of guest RAM.
- This places the main SMRAM window at 0x7C10_1000.
- The SMRAM management in the SMM Core links this SMRAM window into
"mSmmMemoryMap", with a FREE_PAGE_LIST record placed at the start of the
area.
- At "SMM Ready To Lock" time, PiSmmCpuDxeSmm calls InitPaging(). The
first phase (quoted above) decides to split the 2MB page at 0x7C00_0000
into 512 4KB pages, and corrupts the PDE. The new Page Table is
allocated at 0x7CE0_D000, but the PDE is set to 0x7CE0_E000 (plus
attributes 0x67).
- Due to the corrupted PDE, the second phase of InitPaging() already looks
up the PTE for Address=0x7C10_1000 in the wrong place. The second phase
goes on to mark bogus PTEs as "NX".
- PiSmmCpuDxeSmm calls SetMemMapAttributes(). Address 0x7C10_1000 is at
the base of the SMRAM window, therefore it happens to be listed in the
SMRAM map as an EfiConventionalMemory region. SetMemMapAttributes()
calls SmmSetMemoryAttributes() to mark the region as XP. However,
GetPageTableEntry() in ConvertMemoryPageAttributes() fails -- address
0x7C10_1000 is no longer mapped by anything! -- and so the attribute
setting fails with RETURN_UNSUPPORTED. This error goes unnoticed, as
SetMemMapAttributes() ignores the return value of
SmmSetMemoryAttributes().
- When SetMemMapAttributes() reaches another entry in the SMRAM map,
ConvertMemoryPageAttributes() decides it needs to split a 2MB page, and
calls SplitPage().
- SplitPage() calls AllocatePageTableMemory() for the new Page Table,
which takes us to InternalAllocMaxAddress() in the SMM Core.
- The SMM core attempts to read the FREE_PAGE_LIST record at 0x7C10_1000.
Because this virtual address is no longer mapped, the firmware crashes
in InternalAllocMaxAddress(), when accessing (Pages->NumberOfPages).
Remove the useless assignment to (*Pd) from before the loop. Revert the
loop incrementing and the PTE assignment to the known good version.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1789335
Fixes: 4eee0cc7cc
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2457
This commit fixes an offset calculation that is used to write the
VarErrorFlag UEFI variable to the UEFI variable runtime cache.
Currently a physical address is used instead of an offset. This
commit changes the offset to zero with a length of the entire
non-volatile variable store so the entire non-volatile variable
store buffer in SMRAM (with the variable update modification) is
copied to the runtime variable cache. This follows the same pattern
used in other SynchronizeRuntimeVariableCache () calls for
consistency.
* Observable symptom: An exception in SMM will most likely occur
due to the invalid memory reference when the VarErrorFlag variable
is written. The variable is most commonly written when the UEFI
variable store is full.
* The issue only occurs when the variable runtime cache is enabled
by the following PCD being set to TRUE:
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
Fixes: aab3b9b9a1
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Michael Turner <michael.turner@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
#if MACRO is not good style. It should be changed to
#ifdef MACRO style or #if defined (MACRO) style.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add support for revision 3 of System Resource Affinity Table (SRAT).
Decode and dump the new Generic Initiator Affinity Structure.
Validate the Device Handle Type field inside the Generic Initiator
Affinity Structure.
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Tested-by: Sudipto Paul <sudipto.paul@arm.com>
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
While the alternative PEI-less SEC implementation in PrePi already
takes the EnableVFP PCD into account, the PrePeiCore code does not,
and so we may end up triggering synchronous exception when code
attempts to use FP or SIMD registers, which is permitted on AARCH64
by the spec.
So enable the VFP as early as feasible if the associated PCD is set.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib. Note that this means the hack to support warm
reboot by jumping to the SEC entry point with the MMU and caches off
is also no longer used, and can be removed as well, along with the PCD
PcdArmReenterPeiForCapsuleWarmReboot that was introduced for this
purpose.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When downloading over TLS, each TLS message ("APP packet") is returned as
a (decrypted) fragment table by EFI_TLS_PROTOCOL.ProcessPacket().
The TlsProcessMessage() function in "NetworkPkg/HttpDxe/HttpsSupport.c"
linearizes the fragment table into a single contiguous data block. The
resultant flat data block contains both TLS headers and data.
The HttpsReceive() function parses the actual application data -- in this
case: decrypted HTTP data -- out of the flattened TLS data block, peeling
off the TLS headers.
The HttpResponseWorker() function in "NetworkPkg/HttpDxe/HttpImpl.c"
propagates this HTTP data outwards, implementing the
EFI_HTTP_PROTOCOL.Response() function.
Now consider the following documentation for EFI_HTTP_PROTOCOL.Response(),
quoted from "MdePkg/Include/Protocol/Http.h":
> It is the responsibility of the caller to allocate a buffer for Body and
> specify the size in BodyLength. If the remote host provides a response
> that contains a content body, up to BodyLength bytes will be copied from
> the receive buffer into Body and BodyLength will be updated with the
> amount of bytes received and copied to Body. This allows the client to
> download a large file in chunks instead of into one contiguous block of
> memory.
Note that, if the caller-allocated buffer is larger than the
server-provided chunk, then the transfer length is limited by the latter.
This is in fact the dominant case when downloading a huge file (for which
UefiBootManagerLib allocated a huge contiguous RAM Disk buffer) in small
TLS messages.
For adjusting BodyLength as described above -- i.e., to the application
data chunk that has been extracted from the TLS message --, the
HttpResponseWorker() function employs the following assignment:
HttpMsg->BodyLength = MIN (Fragment.Len, (UINT32) HttpMsg->BodyLength);
The (UINT32) cast is motivated by the MIN() requirement -- in
"MdePkg/Include/Base.h" -- that both arguments be of the same type.
"Fragment.Len" (NET_FRAGMENT.Len) has type UINT32, and
"HttpMsg->BodyLength" (EFI_HTTP_MESSAGE.BodyLength) has type UINTN.
Therefore a cast is indeed necessary.
Unfortunately, the cast is done in the wrong direction. Consider the
following circumstances:
- "Fragment.Len" happens to be consistently 16KiB, dictated by the HTTPS
Server's TLS stack,
- the size of the file to download is 4GiB + N*16KiB, where N is a
positive integer.
As the download progresses, each received 16KiB application data chunk
brings the *next* input value of BodyLength closer down to 4GiB. The cast
in MIN() always masks off the high-order bits from the input value of
BodyLength, but this is no problem because the low-order bits are nonzero,
therefore the MIN() always permits progress.
However, once BodyLength reaches 4GiB exactly on input, the MIN()
invocation produces a zero value. HttpResponseWorker() adjusts the output
value of BodyLength to zero, and then passes it to HttpParseMessageBody().
HttpParseMessageBody() (in "NetworkPkg/Library/DxeHttpLib/DxeHttpLib.c")
rejects the zero BodyLength with EFI_INVALID_PARAMETER, which is fully
propagated outwards, and aborts the HTTPS download. HttpBootDxe writes the
message "Error: Unexpected network error" to the UEFI console.
For example, a file with size (4GiB + 197MiB) terminates after downloading
just 197MiB.
Invert the direction of the cast: widen "Fragment.Len" to UINTN.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Maciej Rabeda <maciej.rabeda@linux.intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Maciej Rabeda <maciej.rabeda@linux.intel.com>
The LoadFile protocol can report such a large buffer size that we cannot
allocate enough reserved pages for. This particularly affects HTTP(S)
Boot, if the remote file is very large (for example, an ISO image).
While the TianoCore wiki mentions this at
<https://github.com/tianocore/tianocore.github.io/wiki/HTTP-Boot#ram-disk-image-size>:
> The maximum RAM disk image size depends on how much continuous reserved
> memory block the platform could provide.
it's hard to remember; so log a DEBUG_ERROR message when the allocation
fails.
This patch produces error messages such as:
> UiApp:BmExpandLoadFile: failed to allocate reserved pages:
> BufferSize=4501536768
> LoadFile="PciRoot(0x0)/Pci(0x3,0x0)/MAC(5254001B103E,0x1)/
> IPv4(0.0.0.0,TCP,DHCP,192.168.124.106,192.168.124.1,255.255.255.0)/
> Dns(192.168.124.1)/
> Uri(https://ipv4-server/RHEL-7.7-20190723.1-Server-x86_64-dvd1.iso)"
> FilePath=""
(Manually rewrapped here for keeping PatchCheck.py happy.)
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2455
BuildOption is used by TargetTxtClassObj.py
GenFdsOption is used by GenFds.py
When the GenFds tool is used alone (e.g. python3 -m GenFds.GenFds -h)
With the OptionParser function, the first detected function
prints the help message
import TargetTxtClassObj to GenFds,
The BuildOption will be executed and replace GenFdsOption
We removed all objects associated with this problem that
were created directly during the import process
(e.g. BuildOption, BuildTarget = MyOptionParser(),
TargetTxt = TargetTxtDict())
The Patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Changed @rtval to @retval in SdMmcHcStartSdClock
function description.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guo Dong <guo.dong@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
EnterS3WithImmediateWake () no longer has any callers, so remove it
from ResetSystemLib.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The existing MpInitLib will shadow the microcode update patches from
flash to memory and this is done by searching microcode region specified
by PCD PcdCpuMicrocodePatchAddress and PcdCpuMicrocodePatchRegionSize.
This brings a limition to platform FW that all the microcode patches must
be placed in one continuous flash space.
This patch shadows microcode update according to FIT microcode entries if
it's present, otherwise it will fallback to original logic (by PCD).
A new featured PCD gUefiCpuPkgTokenSpaceGuid.PcdCpuShadowMicrocodeByFit
is added for enabling/disabling this support.
TEST: Tested on FIT enabled platform.
BZ: https://tianocore.acgmultimedia.com/show_bug.cgi?id=2449
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
To avoid patches committed with incorrect email address,
use the EmailAddressCheck class on the author email too.
Example:
$ python BaseTools/Scripts/PatchCheck.py 1a04951309
Checking git commit: 1a04951309
The 'Author' email address is not valid:
* The email address cannot contain a space: /o=Intel/ou=External \
(FYDIBOHF25SPDLT)/cn=Recipients/cn=fe425ca7e5f4401abed22b904fe5d964
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
We are checking different emails from the signature list. We are
going to check more. To be able to differency, add a description
field, so the error reported is clearer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
The HII pages that are part of Tcg2ConfigDxe expect the following PCDs
to be of dynamic HII type, so declare them as such.
gEfiSecurityPkgTokenSpaceGuid.PcdTcgPhysicalPresenceInterfaceVer
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2AcpiTableRev
Currently, the TPM2 ACPI table is not produced, since we do not
incorporate the Tcg2Smm module, which implements the SMI based
physical presence interface exposed to the OS.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Put the TPM2 related DXE modules together in the DSC, and add a
TPM2 support header comment while at it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add edk2 platform boot manager protocol which would have platform
specific refreshes to the auto enumerated as well as NV boot options
for the platform.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This patch updates the microcode loader to always perform a microcode
detect and load on both BSP and AP processor. This is to fix a potential
microcode revision mismatch issue in below situation:
1. Assume there are two microcode co-exists in flash: one production
version and one debug version microcode.
2. FIT loads production microcode to BSP and all AP.
3. UefiCpuPkg loader loads debug microcode to BSP, and skip the loading
on AP.
As a result, different microcode patches are loaded to BSP and AP, and
trigger microcode mismatch error during OS boot.
BZ link: https://bugzilla.tianocore.org/show_bug.cgi?id=2431
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This patch removes the unnecessary alignment check on microcode patch
TotalSize introduced by commit d786a172. The TotalSize has already been
checked with 1K alignment and MAX_ADDRESS in previous code as below:
if ( (UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize) ||
((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd ||
(DataSize & 0x3) != 0 ||
(TotalSize & (SIZE_1KB - 1)) != 0 ||
TotalSize < DataSize
) {
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2434
Current code use below loops to enumerate the CPUs:
for (Index = mMaxNumberOfCpus; Index-- > 0;) {
it has no issue but not easy for the developers to read the code.
Update above code to below style,
for (Index = 0; Index < mMaxNumberOfCpus; Index++) {
It make the developers easy to read and consistent with other
similar cases in this driver.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Ray Ni to have his/her name and email address
displayed properly in the git history.
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-26-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Philippe Mathieu-Daudé to have his/her name and
email address displayed properly in the git history.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-25-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Nikolai Saoukh to have his/her name and email
address displayed properly in the git history.
Cc: Nikolai Saoukh <nms@otdel-1.org>
Reviewed-by: Nikolai Saoukh <nms@otdel-1.org>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-24-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marvin Häuser to have his/her name and email
address displayed properly in the git history (in particular,
commit 62ec4a5e).
Cc: Marvin Häuser <Marvin.Haeuser@outlook.de>
Cc: Marvin Häuser <Marvin.Haeuser@outlook.com>
Reviewed-by: Marvin Häuser <mhaeuser@outlook.de>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-20-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Marc-André Lureau to have his/her name and email
address displayed properly in the git history.
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-19-philmd@redhat.com>
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Laszlo Ersek to have his/her name and email
address displayed properly in the git history.
Cc: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-16-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Baraneedharan Anbazhagan to have his/her name
and email address displayed properly in the git history.
Cc: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Reviewed-by: Baraneedharan Anbazhagan <anbazhagan@hp.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-7-philmd@redhat.com>
We use .mailmap to display contributors email addresses in an
uniform format.
Add an entry for Antoine Cœur to have his/her name and email
address displayed properly in the git history.
Cc: Antoine Cœur <coeur@gmx.fr>
Reviewed-by: Antoine Cœur <coeur@gmx.fr>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20200106115415.11624-4-philmd@redhat.com>
[lersek@redhat.com: fix up valid PatchCheck.py error in Reviewed-by]
[lersek@redhat.com: translit subject to ASCII to suppress PatchCheck.py]
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The endpoint selected by the driver needs to not
only be an interrupt type, but have direction IN
as required to set up an asynchronous interrupt transfer.
Currently, the driver assumes that the first INT endpoint
will be of type IN, but that is not true of all devices,
and will silently fail on devices which have the OUT endpoint
before the IN. Adjust the endpoint selection loop to explictly
check for direction IN.
Test: detachable keyboard on Google Pixel Slate now works.
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: GuoMinJ <newexplorerj@gmail.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2439
The TCG2 DXE supports to parse the 800-155 event GUID from PEI
and puts to the beginning of the TCG2 event.
The TCG2 DXE also supports a DXE driver produces 800-155 event
and let TCG2 DXE driver record.
The 800-155 is a NO-ACTION event which does not need extend
anything to TPM2. The TCG2 DXE also supports that.
Multiple 800-155 events are supported. All of them will be put
to the beginning of the TCG2 event, just after the SpecId event.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
For eMMC modules we used to notify the platform about frequency
change only after sending CMD13 which meant that platform
might not get a chance to apply required post frequency
change fixes to get the clock stable. To fix this
notification has been moved to SdMmcHcClockSupply function
just after we start the SD clock. During first time setup
the notification won't be sent to avoid changing old behavior.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Former change (9caaa79dd7) missed
PROCEDURE_TOKEN part, this change covers it.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Add PS2 keyboard support.
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2316
This patch adds PS2 keyboard support in boot manager, and
add a build flag PS2_KEYBOARD_ENABLE for PS2 keyboard to
build PS2 keyboard driver and SIO driver. Be default the
build flag is not enabled since PS2 keyboard is not common
used. could use -DPS2_KEYBOARD_ENABLE to enable build it
if need this feature.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Previous commits have introduced below fields in structure CPU_AP_DATA:
UINT32 ProcessorSignature;
UINT8 PlatformId;
UINT64 MicrocodeEntryAddr;
which store the information of:
A. CPUID
B. Platform ID
C. Detected microcode patch entry address (including the microcode patch
header)
for each processor within system.
Therefore, the below fields in structure CPU_MP_DATA:
UINT32 ProcessorSignature;
UINT32 ProcessorFlags;
UINT64 MicrocodeDataAddress;
UINT32 MicrocodeRevision;
which store the BSP's information of:
A. CPUID
B. Platform ID
C. The address and revision of detected microcode patch
are redundant and can be removed.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The below 2 microcode patch related fields in structure CPU_MP_DATA:
UINT64 MicrocodePatchAddress;
UINT64 MicrocodePatchRegionSize;
They will be passed from PEI phase and be reused DXE phase.
Previously, these 2 fields were placed after some fields with type
'UINTN', this will lead to different field offset in different
architecture for them.
This commit will move them before the fields with different size in
different architecture to ensure they can be properly used in DXE phase.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2430
This commit will add the definitions for EDKII microcode patch HOB.
The intention of adding this HOB is to provide a scheme to store the below
information:
A. The base address and size of the microcode patches that are being
loaded (from flash) into memory;
B. The information of detected microcode patch for each processor within
the system.
The producer of the HOB will be the UefiCpuPkg/MpInitLib (where the load,
detect and apply of the microcode happen). The consumer of the HOB can be
modules that want to detect/apply the microcode patch by themselves again
later during the boot flow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2429
This commit will attempt to reduce the copy size when loading the
microcode patches data from flash into memory.
Such optimization is done by a pre-process of the microcode patch headers
(on flash). A microcode patch will be loaded into memory only when the
below 3 criteria are met:
A. With a microcode patch header (which means the data is not padding data
between microcode patches);
B. The 'ProcessorSignature' & 'ProcessorFlags' fields in the header match
at least one processor within system;
C. If the Extended Signature Table exists in a microcode patch, the
'ProcessorSignature' & 'ProcessorFlag' fields in the table entries
match at least one processor within system.
Criterion B and C will require all the processors to be woken up once to
collect their CPUID and Platform ID information. Hence, this commit will
move the copy, detect and apply of microcode patch on BSP and APs after
all the processors have been woken up.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If git finds a '\r' character in the message, then it
converts the entire message content into Quoted-Printable
encoding. It appears that when groups.io converts the QP
encoding back to text format, the '\r' characters somehow
become '\n'. To workaround this, the SetupGit.py script
will now explicitly set the sendemail.transferEncoding git
config option to '8bit'
Signed-off-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The size for the array of mSmmMpSyncData->CpuData[] is 0 ~
mMaxNumberOfCpus -1. But current code may use
mSmmMpSyncData->CpuData[mMaxNumberOfCpus].
This patch fixed this issue.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2268
In current implementation, when check whether APs called by StartUpAllAPs
or StartUpThisAp, it checks the Tokens value used by other APs. Also the AP
will update the Token value for itself if its task finished. In this
case, the potential race condition issues happens for the tokens.
Because of this, system may trig ASSERT during cycling test.
This change enhance the code logic, add new attributes for the token to
remove the reference for the tokens belongs to other APs.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
This issue happens under two conditions.
1. Unicode language environment in Windows
2. Python2 (Not reproducible with Python3)
Step to reproduce
C:\edk2>edksetup.bat forcerebuild
The edksetup.bat stuck at 'nmake cleanall'.
Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The latest TCG PFP specification (TCG PC Client Platform Firmware Profile
Specification, Revision 1.05) added new data structure. For example,
the SPDM device measurement. This patch adds the new content.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2311
In patch set 13c5e34a - 0c3e8e99, we implemented incremental build with
using compiler/pre-processor generate dependent header file function.
A issue is found for MSVC compiler, that the cl.exe /showIncludes
build option generate header file list to either stdout or stderr.
For .c file, the header file list is print out to stdout while for
.vfr, .aslc and .nasm file, the file list is print out to stderr.
The build tool use two threads to process the message from stdout and
stderr, but to generate correct *.deps file, build tool need to
combine the header file list from stderr and other messages from stdout
together with correct time sequence order.
So this patch is trying to combine the stdout and stderr together for
the process which is for calling make program.
The impact of this patch is that the output message of build with -q
will be changed. The compiler error message will not print out.
The build behavior of other log level setting will not be impacted.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2423
That commit 13c5e34a1b introduces the first two UTF-8
characters (the quote ') in an otherwise all-ascii file.
In Conf\tools_def.template
There is tow lines of
Notes: Since this tool chain is obsolete, it doesn't enable
the compiler option for included header file list generation,
we replaces the two offending quotes by proper ascii quotes
The patch is going to fix this issue
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2371
This patch is to fix a regression issue that build fails
if multiple build targets given.
Two changes cause this regression issue.
One is AutoGen object __hash__ function only
hash file path and arch, missing ToolChain and build target.
The other is changing the multiple-thread-genfds function as default
build behavior. To generate the genffs command to Makefile, there
is a global data set is used, GenFdsGlobalVariable, which cause build
tool use the data of first build-target build in
the second build-target build.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As per the Microsoft Debug Port Table 2 (DBG2) documentation, that
can be found online, we are missing 2 serial interface types for
Arm DCC and Bcm2835 (the latter being used with the Raspberry Pi).
These same types are present in DebugPort2Table.h so add them to
SerialPortConsoleRedirectionTable.h too.
Note that we followed the same idiosyncrasies as DebugPort2Table
for naming these new macros.
Signed-off-by: Pete Batard <pete@akeo.ie>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PI defines a few architected events that have significance in the MM
context as well as in the non-secure DXE context. So register notify
handlers for these events, and relay them into the standalone MM world.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Redesign the binary cache and not need to save the
cache intermediate result and state in memory as a
ModuleBuildCacheIR class instance. So remove the
CacheIR.py which define the ModuleBuildCacheIR class.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Redesign the binary cache and bases on the compiler to
output the dependency header files info for every module.
The binary cache will directly consume the dependency header
files info and doesn't parse the C source code by iteself.
Also redesign the dependency files list format for module
and try to share the common lib hash result as more as
possible in local process. Remove the unnecessary share data
access across multiprocessing.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Binary cache use the OutputFile method to return the module
built output files needed to store in cache, but current
OutputFile implementation doesn't return complete output files.
Enhance the OutputFile method to return more complete output files.
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Implement a version of the EDK2 IoMmu protocol that is a simple wrapper
around DmaLib. This is intended to be used to wrap NonCoherentDmaLib so
that the generic PCI infrastructure can be used to implement support for
non cache-coherent DMA.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Pete Batard <pete@akeo.ie>
Implement support for driving peripherals with limited DMA ranges to
NonCoherentDmaLib, by adding a device address limit, and taking it,
along with the device offset, into account when allocating or mapping
DMA buffers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Pete Batard <pete@akeo.ie>
Acked-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2388
Token is new introduced by MM MP Protocol. Current logic allocate Token
every time when need to use it. The logic caused SMI latency raised to
very high. Update logic to allocate Token buffer at driver's entry point.
Later use the token from the allocated token buffer. Only when all the
buffer have been used, then need to allocate new buffer.
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2304
The following statement produces a SyntaxWarning with Python 3.8:
if str(FdRegion.RegionType) is 'FILE' and self.Platform.VpdToolGuid in \
str(FdRegion.RegionDataList):
BaseTools/Source/Python/AutoGen/WorkspaceAutoGen.py:168: SyntaxWarning: \
"is" with a literal. Did you mean "=="?
Change the 'is' operator by the conventional '==' comparator.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Third party driver images loaded from Option ROM get queued
for execution after EndOfDxe. These queued images need to be
dispatched from the PlatformBootManagerLib.
Since the queued images were not dispatched, the PCI Option
ROM drivers were not getting loaded on Juno. Therefore,
add call to EfiBootManagerDispatchDeferredImages() for
dispatching deferred images from PlatformBootManagerLib.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1965
For function InsertNewGuidNameMapping, it rellocate the
mGuidList with new size
"mGuidListCount+1 * sizeof(GUID_INFO_BLOCK)". That isn't
its purpose and would cause a overflow operation in
"mGuidList[mGuidListCount - 1].xxx = xxx". Its purpose
is to increase 1 block size of mGuidList. Change it to
"(mGuidListCount + 1) * sizeof (GUID_INFO_BLOCK)".
Adjust the coding style of this function.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Updated IORT parser to conform to the IO Remapping
Table, Platform Design Document, Revision D, March 2018.
The following structure parsers have been updated:
1. SMMUv3 - added proximity domain and device Id
mapping index.
2. RootComplex - added memory address size limit.
2. PMCG - added page 1 support.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Add support for parsing the ACPI FACS table.
The FADT parser has also been updated as it
links the FACS table using the FIRMWARE_CTRL
or X_FIRMWARE_CTRL fields.
Since the FACS table does not follow the standard
ACPI header, the FADT parser extracts the FACS
signature, length and version fields before invoking
the FACS parser.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2400
In Dsc Parser, included dsc file is parsed always no matter
if its condition is False
gUefiOvmfPkgTokenSpaceGuid.test1|FALSE
!if gUefiOvmfPkgTokenSpaceGuid.test1 == FALSE
!include OvmfPkg/test1.dsc
!else
!include OvmfPkg/test2.dsc
!endif
The patch avoids processing redundant dsc files and improves
the way Tool handles them.
In the above case, since the conditional result is FALSE,
"test2.dsc" is not parsed.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Commit 8906f076de ("CryptoPkg/OpensslLib: Add missing header files in
INF file", 2019-08-16) incorrectly placed "ms/uplink.h" in the
auto-generated part of [Sources], in "OpensslLib.inf".
("ms/uplink.h" was added in the right spot in "OpensslLibCrypto.inf".)
Subsequently, when commit 9f4fbd56d4 ("CryptoPkg/OpensslLib: Update
process_files.pl to generate .h files", 2019-10-30) re-generated that part
of "OpensslLib.inf", the "ms/uplink.h" file reference was lost. This
triggers a warning from the "build" utility now.
Name the header file in the right spot in [Sources].
This change makes "OpensslLib.inf" consistent with "OpensslLibCrypto.inf".
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Fixes: 8906f076de
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When diffing "OpensslLib.inf" against "OpensslLibCrypto.inf", the *only*
differences should be:
- BASE_NAME, MODULE_UNI_FILE, and FILE_GUID are expected to differ, in
[Defines];
- "OpensslLib.inf" is expected to list "$(OPENSSL_PATH)/ssl/..." source
files in the auto-generated part of the [Sources] section.
Commit 8906f076de ("CryptoPkg/OpensslLib: Add missing header files in
INF file", 2019-08-16) broke that invariant, by adding "buildinf.h" and
"rand_pool_noise.h" in different order to both INF files.
Fix that order in "OpensslLib.inf" now. (Note that this does not
re-establish full consistency between both INF files -- it just highlights
another problem, which we'll fix in the next patch.)
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Shenglei Zhang <shenglei.zhang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Fixes: 8906f076de
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2363
This patch is to fix a build tool regression issue which was introduced
by commit b8ac0b7f28.This issue caused map file lost the line of IMAGE=***.
For example,in Ovmf.map, there is no line of (IMAGE=<path to efi> ) under
each of modules item.
The path to the efi file generated by each module is written on this line
The purpose of this line is add the debug image full path.
there is no information about the module in the map file other than FVName,
it allows us to quickly know which module this part corresponds to.
In commit b8ac0b7f28,add a line ("self.BuildModules = []") in function,
but it's used to calculate the variable ModuleList in the following code.
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2270
Currently a PCD (e.g. FeaturePCD) cannot be used in a conditional
statement in a DSC/FDF file without a module in the build referencing
the PCD package DEC file.
An example implementation that to support this is to allow a [Packages]
section in the DSC file to list additional package dependencies for PCD
references in the package DSC/FDF files.
this patch is going to add the ability to have the [packages] section
defined in the DSC file
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2118
When a packet is queued/completed for the asynchronous IO queue, the logic
to roll over to the front of the queue doesn't account for actual size of
the IO Submission/Completion queue.
This causes a device to hang due to doorbell being outside of visible
queue. An example would be if an NVMe drive only supported a queue size of
128 while the driver supports 256.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2333
During a SetVariable () invocation, UpdateVariable () is called.
UpdateVariable () contains logic to determine whether a volatile or
non-volatile UEFI variable was set so the corresponding runtime
cache can be updated to reflect the change. The current logic simply
evaluates Variable->Volatile to determine which runtime cache should
be updated.
The problem is Variable->Volatile does not always reflect whether a
volatile variable is being set. Variable->Volatile is set to TRUE
only in the case a pre-existing variable is found in the volatile
variable store. Therefore, the value is FALSE when a new volatile
variable is written.
This change updates the logic to take this into account. If a new
variable is written successfully, the Attributes will accurately
reflect whether the variable is non-volatile. If a pre-existing
variable is modified, the Volatile field will reflect the type of
variable (Attributes are not reliable; e.g. 0x0 indicates deletion).
* Observable symptom: A volatile variable that was set successfully
might return EFI_NOT_FOUND when the variable should be found.
* The issue is a regression introduced to the variable services only
when the variable runtime cache is enabled by the following PCD
being set to TRUE:
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
* The issue was implemented in commit aab3b9b9a1 but the PCD was not
set to TRUE by default enabling the issue until commit e07b7d024a.
Fixes: aab3b9b9a1
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1871
This is null version of RngLib which should be used with modules that
inherit an (indirect) dependency on the RngLib class, but never actually
call RngLib APIs for consuming randomness.
To be more specific, if following components or functionalities are used
in a platform, the BaseRngLibNull should *not* be used. Instead, a non-Null
version of RngLib must be used (like BaseRngLib for IA32/X64, or future
DxeRngLibRngProtocol for all ARCHs).
- HddPasswordDxe.inf
- AES, TLS (TlsDxe.inf, TlsLib.inf), RSA_OAEP, RSA_PK1
- (If BaseRngLibNull interface ASSERTed at boot time)
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2329
XD (ExecutionDisable) feature, when turned on, allows page table
entry BIT63 set to 1 indicating the memory pointed by the page table
is disallowed to execute.
DxeIpl::CreateIdentityMappingPageTables() enables the XD when CPU
supports it.
Later DxeCore modifies the page table to set the BIT63 to protect
the stack/heap to disallow code execution in stack/heap.
UefiCpuPkg/CpuCommonFeaturesLib enables/disables the XD feature
according to PcdCpuFeaturesSetting.
When XD is disabled, GP fault is generated immediately because some
page entries have BIT63 set.
To fix this issue, this patch removes the XD feature logic from
UefiCpuPkg/CpuCommonFeaturesLib so the XD feature is only taken
care of by DxeIpl.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add directory for the Mergify YML configuration files that
provides rules and actions used to process a pull request.
* Auto commit a PR from EDK II Maintainer with 'push' label
set and all CI checks pass
* Auto close a PR from any developers without 'push' label
set and all CI checks pass.
* Auto close a PR from a non EDK II Maintainer that has
the 'push' label set.
* Post a comment to a PR that has a merge conflict.
Submitter can resolved conflicts and reopen the PR.
* Post a comment to a PR that fails PatchCheck.py
Submitter can resolve PatchCheck.py issues and
reopen the PR.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull and TlsLibNull for package CI
builds to reduce package build times. Enabled with
CONTINUOUS_INTEGRATION in YAML files. By default
CONTINUOUS_INTEGRATION is not defined, and the
original lib mappings are preserved.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add YAML file to the package directory with the
configuration of the checks to perform during a
CI build.
Use BaseCryptLibNull for package CI builds to reduce package
build times. Enabled with CONTINUOUS_INTEGRATION in YAML
files. By default CONTINUOUS_INTEGRATION is not defined,
and the original lib mappings are preserved.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2315
Add use of RC_PATH define that provides the path to the resource
compiler that is typically provided in a Windows SDK. The path
changes with different Windows SDK releases. This define is set
to the WINSDK_PATH_FOR_RC_EXE environment variable. This
environment variable must be set to the path to the currently
installed resource compiler (rc.exe).
Update set_vsprefix_envs.bat to set WINSDK_PATH_FOR_RC_EXE
if a Windows SDK is detected.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove references to the number of submodules in the tree, as well as
reword the referring to specific submodules as "former" and "previous".
This means we won't need to keep updating the surrounding text if we
add/remove submodules.
Cc: Andrew Fish <afish@apple.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2303
Whenever a PCI device is discovered, PCI bus calls the
EDKII_DEVICE_SECURITY_PROTOCOL to authenticate it.
If the function returns success, the PCI bus allocates
the resource and installs the PCI_IO for the device.
If the function returns fail, the PCI bus skips the device.
It is similar to EFI_SECURITY_ARCH_PROTOCOL, which
is used to verify an EFI image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Yun Lou <yun.lou@intel.com>
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
When a boot loader examines the memory map, it can see that location 0
is available memory. If it chooses to use that memory, and
PcdNullPointerDetectionPropertyMask is enabled, use of memory in page 0
will cause an exception. This does occur when running the memtest86
program.
Leaving page 0 available is for legacy support purpose. Since we have
deprecated the support of legacy, the solution is just reserving it so
that it cannot be allocated for other uses.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1885
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
In order to permit the use of compilers that only implement the small
code model [which involves the use of ADRP instructions that require
4 KB segment alignment] for generating PE/COFF binaries with a small
footprint, we patch ADRP instructions into ADR instructions while doing
the ELF to PE/COFF conversion.
As it turns out, the linker may be doing the same, but for different
reasons: there is a silicon erratum #843419 for ARM Cortex-A53 which
affects ADRP instructions appearing at a certain offset in memory, and
one of the mitigations for this erratum is to patch them into ADR
instructions at link time if the symbol reference is within -/+ 1 MB.
However, the LD linker fails to update the static relocation tables, and
so we end up with an ADR instruction in the fully linked binary, but
with a relocation entry in the RELA section identifying it as an ADRP
instruction.
Since the linker has already updated the symbol reference, there is no
handling needed in GenFw for such instructions, and we can simply treat
it as an ordinary ADR. However, since it is guaranteed to be accompanied
by an add or load instruction with a LO12 relocation referencing the same
symbol, the section offset check we apply to ADR instructions is going to
take place anyway, so we can just disregard the ADR instruction entirely.
Reported-by: Eugene Cohen <eugene@hp.com>
Suggested-by: Eugene Cohen <eugene@hp.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Add a PCD to govern whether to use DT or ACPI in case the
variable governing this is not found or is not valid.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We have discussed in this thread.
https://edk2.groups.io/g/devel/topic/32205028
Before the change, TPM FW upgrade will impact TPM2 ACPI PCR value because
TPM2 ACPI HID include FW version.
This change make the measurement before TPM2 HID fixup. So, after TPM FW
upgrade, the ACPI PCR record remains the same.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2327
RAID drivers abstract their physical drives that make up
the array into a single unit, and do not supply individual
EFI_BLOCK_IO_PROTOCOL instances for each physical drive in the array.
This breaks support for the Security Storage Command Protocol,
which currently requires an EFI_BLOCK_IO_PROTOCOL to be associated
with the same device the protocol is installed on and provide
all the same parameters.
This patch remove dependency on EFI_BLOCK_IO_PROTOCOL and
allows access to Opal drive members of a RAID array.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Sets gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE in OvmfPkgIa32.dsc, OvmfPkgIa32X64.dsc, and OvmfPkgX64.dsc
so that when SMM_REQUIRE is TRUE, the SMM variable driver will not
use the runtime variable cache.
This is done for OvmfPkg because it currently depends upon a SMM
variable GetVariable ()implementation as a simple method to exercise
the SMM driver stack. This allows the following commands to be used
for variables such as Boot####, BootOrder, and BootNext to test SMM
timing and stability differences on the BSP (e.g. CPU#0) vs an
AP (e.g. CPU#1).
# taskset -c 0 efibootmgr
# taskset -c 1 efibootmgr
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
This change reduces SMIs for GetVariable () by maintaining a
UEFI variable cache in Runtime DXE in addition to the pre-
existing cache in SMRAM. When the Runtime Service GetVariable()
is invoked, a Runtime DXE cache is used instead of triggering an
SMI to VariableSmm. This can improve overall system performance
by servicing variable read requests without rendezvousing all
cores into SMM.
The runtime cache can be disabled with by setting the FeaturePCD
gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache
to FALSE. If the PCD is set to FALSE, the runtime cache will not be
used and an SMI will be triggered for Runtime Service
GetVariable () and GetNextVariableName () invocations.
The following are important points regarding the behavior of the
variable drivers when the variable runtime cache is enabled.
1. All of the non-volatile storage contents are loaded into the
cache upon driver load. This one time load operation from storage
is preferred as opposed to building the cache on demand. An on-
demand cache would require a fallback SMI to load data into the
cache as variables are requested.
2. SetVariable () requests will continue to always trigger an SMI.
This occurs regardless of whether the variable is volatile or
non-volatile.
3. Both volatile and non-volatile variables are cached in a runtime
buffer. As is the case in the current EDK II variable driver, they
continue to be cached in separate buffers.
4. The cache in Runtime DXE and SMM are intended to be exact copies
of one another. All SMM variable accesses only return data from the
SMM cache. The runtime caches are only updated after the variable I/O
operation is successful in SMM. The runtime caches are only updated
from SMM.
5. Synchronization mechanisms are in place to ensure the runtime cache
content integrity with the SMM cache. These may result in updates to
runtime cache that are the same in content but different in offset and
size from updates to the SMM cache.
When using SMM variables with runtime cache enabled, two caches will now
be present.
1. "Runtime Cache" - Maintained in VariableSmmRuntimeDxe. Used to service
Runtime Services GetVariable () and GetNextVariableName () callers.
2. "SMM Cache" - Maintained in VariableSmm to service SMM GetVariable ()
and GetNextVariableName () callers.
a. This cache is retained so SMM modules do not operate on data outside
SMRAM.
Because a race condition can occur if an SMI occurs during the execution
of runtime code reading from the runtime cache, a runtime cache read lock
is introduced that explicitly moves pending updates from SMM to the runtime
cache if an SMM update occurs while the runtime cache is locked. Note that
it is not expected a Runtime services call will interrupt SMM processing
since all CPU cores rendezvous in SMM.
It is possible to view UEFI variable read and write statistics by setting
the gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics FeaturePcd
to TRUE and using the VariableInfo UEFI application in MdeModulePkg to dump
variable statistics to the console. By doing so, a user can view the number
of GetVariable () hits from the Runtime DXE variable driver (Runtime Cache
hits) and the SMM variable driver (SMM Cache hits). SMM Cache hits for
GetVariable () will occur when SMM modules invoke GetVariable ().
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2220
The current VariableInfo application only checks for variable
statistics from SMM if the variable information entries are
not present in the UEFI System Configuration table as published
by the DXE UEFI variable driver (VariableRuntimeDxe).
This change first checks for variable information entries in the
UEFI System Configuration but always checks for entries in SMM
as well. If the SMM variable driver is not present, an instance of
EFI_SMM_VARIABLE_PROTOCOL will not be found and the search for
SMM variable statistics will be aborted (an SW SMI to get variable
statistics will not be triggered).
In the case variable statistics are provided by both a Runtime DXE
driver (e.g. VariableSmmRuntimeDxe) and a SMM driver (VariableSmm),
this change will clearly identify statistics from each respective
driver.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
This change moves the following functions into a dedicated file
so they may be used in other variable files as needed. These are
commonly needed for basic variable data structure parsing
operations. The functions are grouped together in VariableParsing.c
to support cohesiveness for these operations in the file.
Furthermore, it reduces the overall size of the common Variable.c
file.
* DataSizeOfVariable ()
* FindVariableEx ()
* GetEndPointer ()
* GetNextVariablePtr ()
* GetStartPointer ()
* GetVariableDataOffset ()
* GetVariableDataPtr ()
* GetVariableHeaderSize ()
* GetVariableNamePtr ()
* GetVariableStoreStatus ()
* GetVendorGuidPtr ()
* IsValidVariableHeader ()
* NameSizeOfVariable ()
* SetDataSizeOfVariable ()
* SetNameSizeOfVariable ()
* UpdateVariableInfo ()
* VariableCompareTimeStampInternal ()
* VariableServiceGetNextVariableInternal ()
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before called by GetBufferForValue(), Value has already been called
function IsTypeInBuffer to make sure the value must be buffer type.
So GetBufferForValue can not return NULL.
This commit adds ASSERT to assume (GetBufferForValue (&Value) is not
NULL.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Upgrade openssl from 1.1.1b to 1.1.1d.
Something needs to be noticed is that, there is a bug existing in the
released 1_1_1d version(894da2fb7ed5d314ee5c2fc9fd2d9b8b74111596),
which causes build failure. So we switch the code base to a usable
version, which is 2 commits later than the stable tag.
Now we use the version c3656cc594daac8167721dde7220f0e59ae146fc.
This log is to fix the build failure.
https://bugzilla.tianocore.org/show_bug.cgi?id=2226
Besides, the absense of "DSO_NONE" in dso_conf.h causes build failure
in OvmfPkg. So update process_files.pl to generate information from
"crypto/include/internal/dso_conf.h.in".
shm.h and utsname.h are added to avoid GCC build failure.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
MpInitLib sets X2ApicEnable in two places.
1. CollectProcessorCount()
This function is called when MpInitLibInitialize() hasn't been
called before.
It sets X2ApicEnable and later in the same function it configures
all CPUs to operate in X2 APIC mode.
2. MpInitLibInitialize()
The X2ApicEnable setting happens when this function is called in
second time. But after that setting, no code consumes that flag.
With the above analysis and with the purpose of simplifying the code,
the X2ApicEnable in #1 is changed to local variable and the #2 can be
changed to remove the setting of X2ApicEnable.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's logic sets X2ApicEnable flag in each AP's initialization
path when InitFlag == ApInitConfig.
Since all CPUs update the same global data, a spin-lock is used
to avoid modifications from multiple CPUs happen at the same time.
The spin-lock causes two problems:
1. Potential performance downgrade.
2. Undefined behavior when improper timer lib is used.
For example we saw certain platforms used AcpiTimerLib from
PcAtChipsetPkg and that library depends on retrieving PeiServices
from idtr. But in fact AP's (idtr - 4) doesn't point to
PeiServices.
The patch simplifies the code to let BSP set the X2ApicEnable flag so
the spin-lock acquisition from AP is not needed any more.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
RequestMap is used but not Initialized.
RequestMap is called by UhciMapUserRequest, in which RequestMap(Map)
is called by IoMmuMap, and is finally called by IoMmu->Map.
We can not assume RequestMap is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Map is used but not Initialized.
Map is called by IoMmuMap, in which Mapping(Map) is called by IoMmu->Map.
We can not assume Map is given an initial value at any step.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Foreground and background color are saved in a single byte.
Bits 0..3 are the foreground color and bits 4..6 are the background color.
If the Private->Attribute defined correctly, (Private->Attribute >> 4)
must be less than 8.
This commit uses ASSERT to assume "Attribute >> 4" is less than 8.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
IndexTable->Length is used as index in array IndexTable->Index[].
So IndexTable->Length needs to be checked, which should be less than
the array size.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The ACPI specification, version 6.3, January 2019,
defines the Named Object Encoding for ExternalOp
in section '20.2.5.2 Named Objects Encoding'.
This patch adds the definition for ExternalOp to
the list of Primary Opcode definitions.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2295
The current implementation of the FileHandleGetFileName() function
assumes that the Root directory always has the FileName '\0'.
However, the only requirement the UEFI specification defines is that
a prepended '\\' must be supported to access files and folders
relative to the Root directory.
This patch removes this assumption and supports constructing valid
paths for any value of FileName for the Root Directory.
In practice, this fixes compatibility issues with File System drivers
that report '\\' as the FileName of the Root directory, which
currently is both generating an invalid path ("\\\\") and resulting
in an EFI_NOT_FOUND result from the CurrentHandle->Open() call.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Marvin Haeuser <mhaeuser@outlook.de>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Using the inet_pton() function that we imported in the previous patches,
recognize if "HostName" is an IP address literal, and then parse it into
binary representation. Passing the latter to OpenSSL for server
certificate validation is important, per RFC-2818
<https://tools.ietf.org/html/rfc2818#section-3.1>:
> In some cases, the URI is specified as an IP address rather than a
> hostname. In this case, the iPAddress subjectAltName must be present in
> the certificate and must exactly match the IP in the URI.
Note: we cannot use X509_VERIFY_PARAM_set1_ip_asc() because in the OpenSSL
version that is currently consumed by edk2, said function depends on
sscanf() for parsing IPv4 literals. In
"CryptoPkg/Library/BaseCryptLib/SysCall/CrtWrapper.c", we only provide an
empty -- always failing -- stub for sscanf(), however.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For TianoCore BZ#1734, StdLib has been moved from the edk2 project to the
edk2-libc project, in commit 964f432b9b ("edk2: Remove AppPkg, StdLib,
StdLibPrivateInternalFiles", 2019-04-29).
We'd like to use the inet_pton() function in CryptoPkg. Resurrect the
"inet_pton.c" file from just before the StdLib removal, as follows:
$ git show \
964f432b9b0a^:StdLib/BsdSocketLib/inet_pton.c \
> CryptoPkg/Library/BaseCryptLib/SysCall/inet_pton.c
The inet_pton() function is only intended for the DXE phase at this time,
therefore only the "BaseCryptLib" instance INF file receives the new file.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package). That source file has a number of
standard C and BSD socket dependencies. Provide those dependencies here:
- The header files below will simply #include <CrtLibSupport.h>:
- arpa/inet.h
- arpa/nameser.h
- netinet/in.h
- sys/param.h
- sys/socket.h
- EAFNOSUPPORT comes from "StdLib/Include/errno.h", at commit
e2d3a25f1a31; which is the commit immediately preceding the removal of
StdLib from edk2 (964f432b9b).
Note that the other error macro, which we alread #define, namely EINVAL,
has a value (22) that also matches "StdLib/Include/errno.h".
- The AF_INET and AF_INET6 address family macros come from
"StdLib/Include/sys/socket.h".
- The NS_INT16SZ, NS_INADDRSZ and NS_IN6ADDRSZ macros come from
"StdLib/Include/arpa/nameser.h".
- The "u_int" and "u_char" types come from "StdLib/Include/sys/types.h".
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
According to the ISO C standard, strchr() is a function. We #define it as
a macro. Unfortunately, our macro evaluates the first argument ("str")
twice. If the expression passed for "str" has side effects, the behavior
may be undefined.
In a later patch in this series, we're going to resurrect "inet_pton.c"
(originally from the StdLib package), which calls strchr() just like that:
strchr((xdigits = xdigits_l), ch)
strchr((xdigits = xdigits_u), ch)
To enable this kind of function call, turn strchr() into a function.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Sivaraman Nainar <sivaramann@amiindia.co.in>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=960
CVE: CVE-2019-14553
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
For now, PlatformRecovery doesn't work if OsIndications variable
doesn't exist, which is wrong.
According to the UEFI specification section 3.4.1 and 3.4.2, if
processing of BootOrder does not result in success, the OsRecovery
and PlatformRecovery options should still be processed regardless of
the existence of the OsIndications variable.
Therefore, update the code to check PcdPlatformRecoverySupport instead
of the value of OsIndications variable (PlatformRecovery) to fix
this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Walon Li <walon.li@hpe.com>
Signed-off-by: Sunny Wang <sunnywang@hpe.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2312
This patch is for fixing unexpected system hang during S3 unlock process.
FatPei driver maintained and updated internal BlockIo devices list
when there is new BlockIo PPI has installed, and it relied on BlockIo PPI
service to get data from devices. Because BlockIo Ppi leverage
NvmExpressPei Ppi to transit Nvm command to device, we should make sure
NvmePassThruPpi installed before BlockIo PPI.
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
This patch fixes a problem introduced by commit
61bb6eeb4d.
The PcdSnpCreateExitBootServicesEvent is not guaranteed to be FixedAtBuild,
so use PcdGetBool() to supports both fixed and patchable PCD.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Signed-off-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Jiaxin Wu <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2310
When target FV 99% used and only few bytes space left,
SplitFspBin.py may crash with below error:
File "SplitFspBin.py", line 457, in ParseFv
ffshdr = EFI_FFS_FILE_HEADER.from_buffer (self.FvData, offset)
ValueError: Buffer size too small
(40960 instead of at least 40968 bytes)
It was because the offset used by FFS_HEADER parser out of bounds.
It should stop parsing when offset equal or larger than
(buffer size - FFS_HEADER size).
This patch also fixed another crash issue when running script with
Python 3.x and no input parameter given:
File "SplitFspBin.py", line 868, in main
if args.which in ['rebase', 'split', 'genhdr', 'info']:
AttributeError: 'Namespace' object has no attribute 'which'
Test:
1. Ran script with both py2 and py3 with no input and no crash observed.
2. Compare the script result before and after the patch are identical.
Cc: Maurice Ma <maurice.ma@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
1. Add WIN_HOST_BUILD macro check for CLANG9 tool chain
build -p EmulatorPkg\EmulatorPkg.dsc -a IA32 -DWIN_HOST_BUILD=TRUE -t CLANG9
build -p EmulatorPkg\EmulatorPkg.dsc -a X64 -DWIN_HOST_BUILD=TRUE -t CLANG9
2. Append CLANG CC and LINK flags to generate windows HOST.
3. Fix WinHost issue to call GetProcessAffinityMask() API.
The input parameter should be UINTN pointer instead of UINT32 pointer.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1603
CLANG9 generated PE image exposes below two issues.
1. SectionSize is used to copy PE section data. It should be smaller than
section raw size.
2. The real data is required to be copied. So, copy the min size of
VirtualSize and SizeOfRawData.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2255
Update UefiCpuPkg.dsc to guarantee all libraries and
modules are always built. Add the following components.
* UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf
* UefiCpuPkg/Library/CpuCommonFeaturesLib/CpuCommonFeaturesLib.inf
ResetVector.inf is a binary INF, so no source builds are
triggered from adding this line. However, a build with
this component does verify the contents of the INF file.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Currently some tests check the value of SOURCE_DEBUG_ENABLE, and some
tests check if it's defined or not. Additionally, in UefiPayloadPkg as
well as some other trees, we define it as FALSE in the .dsc file.
This patch changes all of the Ovmf platforms to explicitly define it as
FALSE by default, and changes all of the checks to test if the value is
TRUE.
Signed-off-by: Peter Jones <pjones@redhat.com>
Message-Id: <20190920184507.909884-1-pjones@redhat.com>
[lersek@redhat.com: drop Contributed-under line, per TianoCore BZ#1373]
[lersek@redhat.com: replace "!= TRUE" with more idiomatic "== FALSE"]
Cc: Andrew Fish <afish@apple.com>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Cc: Peter Jones <pjones@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SRAT generator uses the configuration manager protocol
to obtain the affinity information for the GICC, GIC ITS,
Memory, Generic Initiator, etc. and generates the SRAT table.
The table generator supports ACPI 6.3, SRAT table revision 3.
The ACPI and PCI device handles of the Generic Initiator
Affinity structures are represented using tokens. The
generator invokes the configuration manager protocol
interfaces and requests for objects referenced by tokens
to get the device handle information.
The Configuration Manager object definition for the GICC has
been updated to include the Proximity Domain, Clock Domain
and associated flag information. Similarly the Configuration
Manager object for the GIC ITS has been updated to include
the Proximity Domain information. These changes should not
impact any existing implementations as the new fields have
been added towards the end of the Configuration Manager
Objects.
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Patch addresses Bugzilla #1974.
During ExitBootServices stage, drivers should not call any
functions known to use Memory Allocation Services. One of such
functions (as per UEFI spec) is UNDI->Shutdown().
Since UNDI drivers during ExitBootServices phase are expected
to put the adapter to such a state that it will not perform any DMA
operations, there is no need to interface UNDI by SNP driver during
that phase.
Finally, since ExitBootServices event notification function in SNP
only calls UNDI->Shutdown() and Stop() functions, there is no need
to create this event at all. Adding PCD to control creation of event
reacting to ExitBootServices() call so that systems with UNDIs relying
on SNP to call their Shutdown() and Stop() can still work.
Change-Id: Idd76f26d2e8ff7cf88b2d75e2d524c74211f2e89
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Maciej Rabeda <maciej.rabeda@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Add support for allocating aligned pages at an alignment higher
than 4K. The new function allocated memory taking into account
the padding required and then frees up unused pages before mapping
it.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
While allocating pages aligned at an alignment higher than
4K, allocate memory taking into consideration the padding
required for that alignment. The calls to free pages takes
care of this already.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
commit a7e2d20193 introduces the code to
get PcdTpm2AcpiTableRev in the driver entry point. This PCD is designed as
DynamicHii or DynamicHiiEx PCD. So, this PCD depends on Variable service.
To make sure PcdTpm2AcpiTableRev value be got, add Variable service as Depex.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: jiewen Yao <jiewen.yao@intel.com>
When c/h file use macro after #include, for example,
In this case, GenMake is not able to create a healthy dependency for the c
file. GenMake used to add $(FORCE_REBUILD) dependency in the c file, this
guarantee the c file is always compiled in incremental build. But, this
function is broken since 05217d210e which
enable /MP for MSVC compiler, in order to compile multiple c files in one
command multi-processing. The fix here is adding '$(FORCE_REBUILD)' back to
retain the original function.
Line number 1728 and 978 are the code pieces which handle this logic.
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
An extra 's' slipped into the 'processing' word.
Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
An extra 's' slipped into the FvIsBeingProcessed function
name. Drop it to fix the typo.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Similar to what we now do for OVMF, we need to consider the possibility
that PlatformBootManagerWaitCallback () may be called with a
PcdPlatformBootTimeOut that was set to zero, in which case the call should
simply return.
We also change the initial timeout variable name to make the code explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-3-pete@akeo.ie>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Independently of how we decide to address other aspects of the regression
introduced with commit 2de1f611be, it doesn't
make much sense to call for a progress update if PcdPlatformBootTimeOut is
zero.
PcdPlatformBootTimeOut 0, which is the cause of the bug (division by zero)
should be considered to indicate that a platform is not interested in
displaying a progress report, so we alter PlatformBootManagerWaitCallback
to behave that way.
We also change one variable name to make the code more explicit.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Message-Id: <20191014150311.16740-2-pete@akeo.ie>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2266
Commit 2de1f611be introduced a regression
whereas platforms that did set PcdPlatformBootTimeOut to 0 are now getting
an unexpected call to PlatformBootManagerWaitCallback().
This patch also ensures that, if PcdPlatformBootTimeOut is 0xFFFF we don't
call PlatformBootManagerWaitCallback() with a zero argument as doing so
would produce an unwarranted jump to full progress completion which is
likely to throw off users.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
- If a platform boots such that the boot CPU count is smaller than
PcdCpuMaxLogicalProcessorNumber, then the platform cannot use the "fast
AP detection" logic added in commit 6e1987f19a. (Which has been
documented as a subset of use case (2) in the previous patch.)
Said logic depends on the boot CPU count being equal to
PcdCpuMaxLogicalProcessorNumber. If the equality does not hold, the
platform either has to wait too long, or risk missing APs due to an
early timeout.
- The platform may not be able to use the variant added in commit
0594ec417c either. (Which has been documented as use case (1) in the
previous patch.)
See commit 861218740d. When OVMF runs on QEMU/KVM, APs may check in
with the BSP in arbitrary order, plus the individual AP may take
arbitrarily long to check-in. If "NumApsExecuting" falls to zero
mid-enumeration, APs will be missed.
Allow platforms to specify the exact boot CPU count, independently of
PcdCpuMaxLogicalProcessorNumber. In this mode, the BSP waits for all APs
to check-in regardless of timeout. If at least one AP fails to check-in,
then the AP enumeration hangs forever. That is the desired behavior when
the exact boot CPU count is known in advance. (A hung boot is better than
an AP checking-in after timeout, and executing code from released
storage.)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1515
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The last parameter of ReserveResourceInGcd() is "ImageHandle", forwarded
in turn to gDS->AllocateMemorySpace() or gDS->AllocateIoSpace() as "owner"
image handle.
But BlDxeEntryPoint() passes "SystemTable" as "ImageHandle".
Compilers have not flagged it because EFI_HANDLE (the type of
"ImageHandle") is unfortunately specified as (VOID*), and
(EFI_SYSTEM_TABLE*) converts to (VOID*) silently.
Hand the entry point function's "ImageHandle" parameter to
ReserveResourceInGcd(). This fixes an actual bug.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
(This patch is unrelated to the rest of this series; its purpose is to
enable building the UefiPayloadPkg DSC files with GCC.)
When building "UefiPayloadPkg/UefiPayloadPkgIa32.dsc" with GCC48 for the
DEBUG target, the compiler reports that "Entry32" may be used
uninitialized in ParseAcpiInfo(), in the XSDT branch.
Code inspection proves the compiler right. In the XSDT branch, the code
from the RSDT branch must have been duplicated, and "Entry32" references
were replaced with "Entry64" -- except where "MmCfgHdr" is assigned.
Fix this bug by introducing a helper variable called "Signature", so that
we have to refer to "Entry32" or "Entry64" only once per loop body.
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Guo Dong <guo.dong@intel.com>
Cc: Maurice Ma <maurice.ma@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The FvHasBeenProcessed() and FvIsBeingProcesssed() functions make sure
that every firmware volume is processed only once (every driver in every
firmware volume should be discovered only once). For this, the functions
use a linked list.
In MdeModulePkg's DXE Core and SMM Core, the key used for identifying
those firmware volumes that have been processed is the EFI_HANDLE on which
the DXE or SMM firmware volume protocol is installed. In the
StandaloneMmPkg core however, the key is the address of the firmware
volume header; that is, it has type (EFI_FIRMWARE_VOLUME_HEADER*).
(EFI_FIRMWARE_VOLUME_HEADER*) has nothing to do with EFI_HANDLE.
EFI_HANDLE just happens to be specified as (VOID*), and therefore the
conversion between (EFI_FIRMWARE_VOLUME_HEADER*) and EFI_HANDLE is silent.
(The FvHasBeenProcessed() and FvIsBeingProcesssed() functions were likely
copied verbatim from MdeModulePkg's DXE Core and/or the SMM Core, and not
flagged by the compiler in StandaloneMmPkg due to UEFI regrettably
specifying EFI_HANDLE as (VOID*), thereby enabling the above implicit
conversion.)
We should not exploit this circumstance. Represent the key type faithfully
instead.
This is a semantic fix; there is no change in operation.
Cc: Achin Gupta <achin.gupta@arm.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The EDK 1 Shell (available at <https://github.com/tianocore/edk-Shell>)
has a bug in its EFI_SHELL_ENVIRONMENT2.Execute() implementation that
edk2's UefiShellLib has no choice but to work around.
Improve the explanation in the code. Also, document the implicit
EFI_HANDLE -> (EFI_HANDLE*) conversion, which happens implicitly after
dereferencing ParentHandle, with an explicit cast.
In practice, this patch is a no-op.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
In the FileBufferSave() function, we invoke ShellCloseFile() if "Directory
Can Not Be Saved".
The ShellCloseFile() function takes a (SHELL_FILE_HANDLE*) parameter
called "FileHandle", and correctly passes the de-referenced (*FileHandle)
to EFI_SHELL_CLOSE_FILE, which takes a SHELL_FILE_HANDLE.
However, FileBufferSave() passes SHELL_FILE_HANDLE to ShellCloseFile(),
not the expected (SHELL_FILE_HANDLE*). Correct it.
This fixes an actual bug that has remained hidden for two reasons:
- pointer-to-VOID converts from/to any pointer-to-object type silently,
- the bug is on an error path which has likely never fired in practice.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The TouchFileByHandle() and IsDirectoryEmpty() functions are passed
SHELL_FILE_HANDLE parameters, and they use those parameters correctly.
However, their parameter lists say EFI_HANDLE.
Spell out the right type in the parameter lists.
In practice, this change is a no-op (because, quite regrettably, both
EFI_HANDLE and SHELL_FILE_HANDLE are specified to be typedefs of (VOID*)).
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The UefiShell*CommandsLib instances have constructor functions that do
something like:
gHiiHandle = HiiAddPackages (...);
...
ShellCommandRegisterCommandName (..., gHiiHandle, ...);
and destructor functions that implement the following pattern:
HiiRemovePackages (gHiiHandle);
The -- semantic, not functional -- problem is that "gHiiHandle" is
declared with type EFI_HANDLE, and not EFI_HII_HANDLE, in all of these
library instances, even though HiiAddPackages() correctly returns
EFI_HII_HANDLE, and HiiRemovePackages() takes EFI_HII_HANDLE.
Once we fix the type of "gHiiHandle", it causes sort of a butterfly
effect, because it is passed around widely. Track down and update all of
those locations.
The DynamicCommand lib instances use a similar pattern, so they are
affected too.
NOTE: in practice, this patch is a no-op, as both EFI_HII_HANDLE and
EFI_HANDLE are typedefs to (VOID*). However, we shouldn't use EFI_HANDLE
where semantically EFI_HII_HANDLE is passed around.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ShellCommandRunConnect() function passes EFI_HANDLE -- (VOID*) --
objects to ConvertAndConnectControllers(), and
ConvertAndConnectControllers() passes those to gBS->OpenProtocol().
Accordingly, ConvertAndConnectControllers() should specify EFI_HANDLE
parameter types, not (EFI_HANDLE*) -- (VOID**) -- types.
This typo is masked because (VOID*) converts to and from any
pointer-to-object type silently.
Note that functionally speaking there is no problem, so this patch does
not change beavior, only cleans up the code.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
This change is a no-op in practice; it's a semantic improvement.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are all in Unload() functions, which are probably exercised
infrequently. Fix the UninstallMultipleProtocolInterfaces() calls.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jiewen Yao <Jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
In the following call tree:
PlatformInit ()
mInstalledPackages = HiiAddPackages ()
GopInstalled ()
PopulateForm (PackageList = mInstalledPackages)
CreateResolutionOptions (PackageList)
HiiSetString (PackageList
HiiUpdateForm (PackageList)
PlatformDxe passes around an EFI_HII_HANDLE that (a) originates from
HiiAddPackages() and (b) is ultimately passed to HiiSetString() and
HiiUpdateForm(). The intermediate functions PopulateForm() and
CreateResolutionOptions() however take that parameter as an
(EFI_HII_HANDLE*).
There is no bug in practice (because the affected functions never try to
de-reference the "PackageList" parameter, they just pass it on), but the
function prototypes are semantically wrong. Fix that.
This could remain hidden so long because pointer-to-VOID silently converts
to/from any pointer-to-object type, and the UEFI spec mandates that
EFI_HII_HANDLE be a typedef to (VOID*).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The SignalEvent() boot service takes an EFI_EVENT, not an (EFI_EVENT*).
Fix the call in the notification function of
"EFI_SIMPLE_NETWORK_PROTOCOL.WaitForPacket".
This is an actual bug. The reason it's never been triggered is likely that
the "SNP.WaitForPacket" event is rarely waited for by applications -- edk2
itself has zero instances of that, for example.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
This is an actual bug. It must have remained hidden until now because it's
on an error path. Fix the UninstallMultipleProtocolInterfaces() call.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The SockFreeFoo() callback function for NetbufFromExt() has to match the
NET_VECTOR_EXT_FREE prototype, which takes a (VOID*) as callback argument
(Arg). EFI_EVENT has nothing to do with NET_VECTOR_EXT_FREE. Fix the
SockFreeFoo() parameter list.
This change is a no-op in practice.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both NetLibDestroyServiceChild() and EFI_SERVICE_BINDING_DESTROY_CHILD
take an EFI_HANDLE for the "ChildHandle" parameter, not an (EFI_HANDLE*).
This patch fixes a real bug.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Both the "ControllerHandle" parameter of CloseProtocol() and the "Handle"
parameter of UninstallMultipleProtocolInterfaces() have type EFI_HANDLE,
not (EFI_HANDLE*).
This patch fixes actual bugs. The issues have been dormant likely because
they are on error paths. (Or, in case of TlsAuthConfigDxe, because the
driver is unloaded likely very infrequently.)
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
NetLibGetSnpHandle() returns an EFI_HANDLE, not an (EFI_HANDLE*).
NetLibGetMacAddress() only uses the return value ("SnpHandle") for a
NULL-check. Fix the type of "SnpHandle".
This patch is a no-op.
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The HandleProtocol() boot service takes an EFI_HANDLE, not an
(EFI_HANDLE*). Remove the bogus cast in the
InternalImageHandleToFvHandle() function.
This is a semantic cleanup; there is no change in behavior.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The BootScriptInsert() and BootScriptLabel() functions take the in/out
parameter "Position" as (EFI_S3_BOOT_SCRIPT_POSITION*), and pass it to
S3BootScriptMoveLastOpcode() and S3BootScriptLabel(), respectively.
The callees take the in/out parameter "Position" as (VOID**). Add explicit
casts for clarity.
There is no change in functionality.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The SmiHandlerRegister() function explicitly casts "SmiHandler" (of type
(SMI_HANDLER*)) to EFI_HANDLE, when outputting "DispatchHandle".
Apply the same cast in the counterpart function SmiHandlerUnRegister(),
which compares multiple "SmiHandler"s against the input "DispatchHandle".
This is a semantic cleanup; there is no functional change.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Unlike the InstallMultipleProtocolInterfaces() boot service, which takes
an (EFI_HANDLE*) as first parameter, the
UninstallMultipleProtocolInterfaces() boot service takes an EFI_HANDLE as
first parameter.
These are actual bugs. They must have remained hidden until now because
they are on error paths. Fix the UninstallMultipleProtocolInterfaces()
calls.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Clean up two issues around FindFileEx():
- The "AprioriFile" parameter's type differs between the function
declaration and the function definition. The correct type is
(EFI_PEI_FILE_HANDLE*).
- "FfsFileHeader" has type (EFI_FFS_FILE_HEADER*); for clarity, we should
cast it explicitly to EFI_PEI_FILE_HANDLE when assigning it to
(*AprioriFile).
This is a semantic cleanup, there is no functional change.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The PI spec (v1.7) correctly specifies "EFI_RUNTIME_EVENT_ENTRY.Event" in
natural language, but the field type in the structure definition itself is
wrong -- it should be EFI_EVENT, not (EFI_EVENT*).
This spec bug is likely unfixable for compatibility reasons, and so edk2
works it around already. We should clearly document the workaround.
Functionally, this patch is a no-op.
(I've also requested a non-normative (informative) clarification for the
PI spec: <https://mantis.uefi.org/mantis/view.php?id=2017>.)
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
The HiiConstructConfigHdr() function takes the "DriverHandle" parameter in
order to fetch the device path from it, and then turn the device path into
PATH routing information.
The HiiConstructConfigHdr() function is called from
VariableCleanupHiiExtractConfig(), which is only installed when "Type" is
"VarCleanupManually" in PlatformVarCleanup().
In that case, we create "Private->DriverHandle" as a new handle, and
install "mVarCleanupHiiVendorDevicePath" on it. Then we pass
"Private->DriverHandle" to HiiAddPackages(), which consumes the device
path for routing purposes.
It follows that the "DriverHandle" argument passed to
HiiConstructConfigHdr() should be the same driver handle, for matching
routing.
Currently we pass "Private->HiiHandle", which is clearly a typo, because
it is the return value of HiiAddPackages(), and stands for the published
HII package list.
Therefore this patch addresses an actual bug.
The typo has not been flagged by compilers because the UEFI spec
regrettably defines both EFI_HANDLE and EFI_HII_HANDLE as (VOID*).
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EfiCreateProtocolNotifyEvent() takes a (VOID**) for "Registration",
similarly to gBS->RegisterProtocolNotify(). We should pass the address of
an actual pointer-to-VOID, and not the address of an EFI_EVENT. EFI_EVENT
just happens to be specified as (VOID*), and has nothing to do with the
registration.
The same applies to gMmst->MmRegisterProtocolNotify().
"mFtwRegistration", "mFvRegistration", and "mFvbRegistration" are used for
nothing else.
This change is a no-op in practice; it's a semantic improvement.
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
GetModuleInfoFromHandle() takes an EFI_HANDLE -- (VOID*) -- as first
parameter, but InsertFpdtRecord() passes (EFI_HANDLE*) -- (VOID**).
(VOID**) converts silently to (VOID*), which is why the wrong cast is
masked.
Note that the *value* that is passed is alright -- therefore this patch
does not change behavior --, it's just semantically wrong to pass an
(EFI_HANDLE*) where an EFI_HANDLE is expected.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
EFI_REGISTER_KEYSTROKE_NOTIFY and EFI_UNREGISTER_KEYSTROKE_NOTIFY require
the notification handle to have type (VOID*). The notification handle has
nothing to do with the EFI_HANDLE type.
This change is a semantic fix; functionally, it's a no-op.
Cc: Andrew Fish <afish@apple.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
The 3rd and 4th parameters of the CloseProtocol() call are wrong.
Given that we're not dissociating a child controller from a parent
controller (= closing a BY_CHILD_CONTROLLER open), but closing a BY_DRIVER
open, the 4th parameter (ControllerHandle) should equal the 1st parameter
(Handle).
It's unclear why this code hasn't crashed before.
Note that the patch doesn't fix the underlying driver model bug. I don't
understand what the loop in MmcDriverBindingStop() attempts to do. Is this
driver supposed to be a bus driver? It seems to create new handles, and to
append device path nodes. But it doesn't set up proper parent/child
protocol opens, and it doesn't close them.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
- The 2nd parameter of EFI_SERVICE_BINDING_CREATE_CHILD is:
IN OUT EFI_HANDLE *ChildHandle
- The 2nd parameter of EFI_SERVICE_BINDING_DESTROY_CHILD is:
IN EFI_HANDLE ChildHandle
Fix the DestroyChild() call in TcpFastbootTransportStop().
This is an actual bugfix; I don't know why the current code doesn't crash.
Perhaps the function is never reached in practice? (It could be tied to an
error path.)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch is unrelated to the rest of the series; it just makes sure that
"EmbeddedPkg/EmbeddedPkg.dsc" builds for all platforms advertised in
SUPPORTED_ARCHITECTURES (in particular, X64).
No functional changes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The existing loop is set to call PlatformBootManagerWaitCallback every
second except the last one. We believe this is a mistake as it prevents
the called code from performing timeout expiration tasks such as, for
instance, ensuring that the last segment of a progress bar is displayed
before continuing (which is a current issue for the RPi3 platform).
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
While looking at encoding and line ending errors, I found this file
in fact simply points to a sourceforge page which no longer exists.
Since there is nothing more to say than "this is an import of
libfdt", let's just delete it.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2232
Commit 0075ab2cec introduced an issue that causes an exception
when multiple workspace packages paths are specified. For example,
if edk2-platforms is used, the root directory will contain an edk
and edk2-platforms directory representing the respective
repositories.
In GenMake, the path to the package DEC file for a module is
discovered by getting the relative path of the INF to the
workspace root directory. Each directory in the relative path
is incrementally joined to the WORKSPACE directory. The file
list in the joined path is searched for a DEC file.
As an example, if the build command is used on a package outside
the edk2 repository, the INF file path is relative to the
edk2-platforms directory not edk2. This causes directory paths
to be built that do not exist. Commit 0075ab2cec replaced the
os.path.exists() call with a try except block that always fails
when os.listdir() is invoked to enumerate the list of files in
the built directory path on packages outside edk2.
This commit restores the original conditional statement which
avoids calling os.listdir() with an invalid directory path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Michael Kubacki <michael.a.kubacki@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=2216
This patch is going to fix the lib order in static_library_files.lst.
This issue is introduced by commit 673d09a2dd.
Before 673d09a2dd, build tool apply build rule for the module's library
firstly and then apply build rule for module itself. Now, build tool
apply build rule for module self and then for its library. That behavior
impact the lib order in static_library_files.lst.
This patch is to call module's LibraryAutoGenList function
explicitly, where the applying build rule action for
library is triggered.
Cc: Liming Gao <liming.gao@intel.com>
Cc: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Tested-by: dann frazier <dann.frazier@canonical.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
There is a bug in current driver code that makes
it impossible for it to work with devices that
only work in legacy speed mode since the function
EmmcSwitchToHighSpeed will return with EFI_INVALID_PARAMETER
for such bus mode. Since the logic in that function will
work well for SdMmcMmcLegacy this patch just allows
to call this function with SdMmcMmcLegacy bus mode.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
SD specification recommends switching card bus timing before
switching bus timing in controller. Emmc driver used to do
this switch other way around. This commit adds controller
timing switch in EmmcSwitchBusTiming function to enforce this
order and removes all controller timing programming from
EmmcSwitchToXXX functions.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2218
Stopping the SD clock before switching host controller
bus timing is only necessary if preset value enable is
set in host controller. Code that performs switch to
HS200 doesn't check this condition right now and we also
don't do the SD clock stop before any other bus timing switch
in host controller. Since the driver is generally not ready to support
host controller with preset value enable set we removed this
code.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Hao A Wu <hao.a.wu@intel.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1039
Current implementation not checks system mode before using
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.X64 or
PAGE_TABLE_LIB_PAGING_CONTEXT.ContextData.Ia32. This patch check the
mode before using the correct one.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
EBC compiler doesn't support C11 static_assert macro.
So, define STATIC_ASSERT as empty to pass EBC arch build.
STATIC_ASSERT macro is introduced @204ae9da230ecbf0910c21acac7aa5d5e8cbb8d0
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
There is no sourceX offset in case when
Configure->PixelFormat == PixelBlueGreenRedReserved8BitPerColor.
We are copying most left pixels instead of copying required rectangle.
Signed-off-by: Gris87 <Gris87@yandex.ru>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Tested-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in ShellPkg which don't have the policy to defer the
execution of the image.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the caller in PlatformDriOverrideDxe which don't have the policy to
defer the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in UefiBootManagerLib which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in DxeCapsuleLibFmp which don't have the policy to defer
the execution of the image.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
For the LoadImage() boot service, with EFI_SECURITY_VIOLATION retval,
the Image was loaded and an ImageHandle was created with a valid
EFI_LOADED_IMAGE_PROTOCOL, but the image can not be started right now.
This follows UEFI Spec.
But if the caller of LoadImage() doesn't have the option to defer
the execution of an image, we can not treat EFI_SECURITY_VIOLATION
like any other LoadImage() error, we should unload image for the
EFI_SECURITY_VIOLATION to avoid resource leak.
This patch is to do error handling for EFI_SECURITY_VIOLATION explicitly
for the callers in EmbeddedPkg which don't have the policy to defer the
execution of the image.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2182
Inorder to support VS2019, we add VS2019 config process
in Setup Batch Files,
Because VS2019 and VS2017 could using same vswhere.exe
to detect the InstallationPath,
So we add the -version as the parameter of vswhere
to get the correct VS2017/VS2019's InstallationPath
v3: In BaseTools\set_vsprefix_envs.bat,
move WINSDK10_PREFIX setting into VCToolsInstallDir check condition.
Cc: Amy Chan <amy.chan@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Ching JenX Cheng <ching.jenx.cheng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Pete Batard <pete@akeo.ie>
This reverts commit bc9e4194cf.
This change causes the dependent header files are missing in Makefile.
It makes the incremental build not work. So, revert this change.
Cc: Bob Feng<bob.c.feng@Intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng<bob.c.feng@Intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2150
v4:
The v3 posting didn't do what it promised to do, so do it now for real.
V3 changes:
change to mov instruction (non locking instuction) instead
of xchg to simplify design.
V2 changes:
Add xchg 16 bit instructions to handle sgdt and sidt base
63:48 bits and 47:32 bits.
Add comment to explain why xchg 64bit isnt being used
Split lock happens when a locking instruction is used on mis-aligned data
that crosses two cachelines. If close source platform enables Alignment
Check Exception(#AC), They can hit a double fault due to split lock being
in CpuExceptionHandlerLib.
sigt and sgdt saves 10 bytes to memory, 8 bytes is base and 2 bytes is limit.
The data is mis-aligned, can cross two cacheline, and a xchg
instruction(locking instuction) is being utilize.
Signed-off-by: John E Lofgren <john.e.lofgren@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Due to needs a tackling the deficiency of the AP API, it's necessary to
ensure that in non-blocking mode previous AP executed command is
finished before starting new one.
To remedy above:
1) execute AcquireSpinLock instead AcquireSpinLockOrFail - this will
ensure time "window" to eliminate potential race condition between
BSP and AP spinLock release in non-blocking mode.
This also will eliminate possibility to start executing new AP
function before last is finished.
2) remove returns EFI_STATUS - EFI_NOT_READY - in new scenario returned
status is not necessary to caller.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2201
An error occurs using special VpdPcd that is not used in the Inf file
In dsc:
[PcdsDynamicExVpd.common.DEFAULT]
gBoardModuleTokenSpaceGuid.test1|*|{CODE({
{0x0} // terminator
})}
In dec:
[PcdsDynamicEx]
# Vpd GPIO table
gBoardModuleTokenSpaceGuid.test1|{0}|GPIO_INIT_CONFIG[]|0x50000018 {
<HeaderFiles>
Library/GpioLib.h
<Packages>
MdePkg/MdePkg.dec
}
ValueError: invalid literal for int() with base 0: '*'
This Patch is going to fix issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The StandaloneMmPkg .DSC file went out of sync with the changes
applied to the package when I enabled this code on the Synquacer
platform in edk2-platforms. So apply the necessary changes to make
this package build in isolation.
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Build-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2188
build -p MdeModulePkg\MdeModulePkg.dsc -a IA32 -m
MdeModulePkg\Universal\PCD\Pei\Pcd.inf
Error:
AttributeError: 'PlatformInfo' object has no attribute
'DynamicPcdList'
The DSC data object used to build a separate module today
is PlatformInfo rather than PlatformAutoGen
'PlatformAutoGen' object has attribute 'DynamicPcdList'
This patch is going to fixed this issue
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The header files are used but missing in INF, which causes
warning message when building them.
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
After upgrading the CI system we use for building the ArmVirtPkg
targets, we started seeing failures due to the NOOPT build running
out of space when using the CLANG38 toolchain definition combined
with clang 7.
We really don't want to increase the FD/FV sizes in general to
accommodate this, so parameterize the relevant quantities and
increase them by 50% for NOOPT builds.
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Today's behavior is to enable 5l paging when CPU supports it
(CPUID[7,0].ECX.BIT[16] is set).
The patch changes the behavior to enable 5l paging when two
conditions are both met:
1. CPU supports it;
2. The max physical address bits is bigger than 48.
Because 4-level paging can support to address physical address up to
2^48 - 1, there is no need to enable 5-level paging with max
physical address bits <= 48.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
When building BaseTools, GNUmakefile builds create directory
BaseTools/Source/C/libs/. On the other hand, Makefile builds use libs
as an nmake pseudo target, so it either must NOT exist as a file or
directory, OR it must phony dependency like .PHONY. The latter
solution conflicts with NmakeSubdirs.py. Therefore, I make it go away
in the cleanall target. I could also add it to the clean target, but
it strikes me that cleanall should be more forceful.
Signed-off-by: Burt Silverman <burtms@gmail.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2157
Hii Pcd links to a efi variable. The Variable
default value is evaluated by related Hii Pcds
setting. If multiple Hii Pcds links to one variable,
and the offset overlap, the later Hii Pcds setting
should be effective. There is a tool bug that is if
the Pcds are in different dsc file which are included
into the platform dsc file, build tool does not get
the Pcds relative position correctly. That means
build tool does not know which Pcd is the later one. As
the result, the variable default value will be incorrect.
This patch is to fix this bug.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
To support auto-connection, EFI_BLUETOOTH_LE_SMP_DATA_TYPE needs to
add a new data type EfiBluetoothSmpPeerAddressList which associates
with a list of Bluetooth per address connected before.
This new data type was added in UEFI spec 2.7b.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1778
We are going to add keyword (lower case) 'static' for functions and global
variables which are not referenced outside their current C file.
However, the ECC tool only recognizes upper case 'STATIC' at this moment.
This will lead to issue reports for new codes that follow the above coding
style.
This patch is going to handle lower case 'static'
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The LoadImage() boot service is a bit unusual in that it allocates
resources in a particular failure case; namely, it produces a valid
"ImageHandle" when it returns EFI_SECURITY_VIOLATION. This is supposed to
happen e.g. when Secure Boot verification fails for the image, but the
platform policy for the particular image origin (such as "fixed media" or
"removable media") is DEFER_EXECUTE_ON_SECURITY_VIOLATION. The return code
allows platform logic to selectively override the verification failure,
and launch the image nonetheless.
ArmVirtPkg/PlatformBootManagerLib does not override EFI_SECURITY_VIOLATION
for the kernel image loaded from fw_cfg -- any LoadImage() error is
considered fatal. When we simply treat EFI_SECURITY_VIOLATION like any
other LoadImage() error, we leak the resources associated with
"KernelImageHandle". From a resource usage perspective,
EFI_SECURITY_VIOLATION must be considered "success", and rolled back.
Implement this rollback, without breaking the proper "nesting" of error
handling jumps and labels.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1992
Fixes: 23d04b58e2
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Incorporate the stack protector library into the AARCH64 build of
the Shell binaries as a NULL library resolution, to avoid build
errors when the compiler injects stack integrity checks.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In some cases, the CLANG38 toolchain profile in LTO mode emits GOT
based relocations in spite of our attempts to avoid this, by using
hidden visibility, -Bsymbolic etc.
On AARCH64, we managed to work around this by processing the GOT
based relocations in GenFw. As it turns out, the same issue exists
on 32-bit ARM, but unfortunately, we cannot use a similar trick to
get rid of the GOT entry, and the relocation metadata is insufficient
to locate the GOT entry in the binary.
Note that in this particular case, we are interested in PIE linking
only (i.e., producing a .rela section containing dynamic relocations
that the startup code can process directly), and not in position
independent code generation, and by passing the -pie option to the
linker directly using -Wl,-pie (and dropping -shared), we can coerce
the GOLD linker into doing only the former rather than both when it
performs its LTO code generation.
Acked-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2153
Current logic will skip searching EFI_PEI_CORE_FV_LOCATION_PPI when the
PPI in PpiList having EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag,
but platform may pass single PPI in PpiList that should be supported.
Changed the logic to verify PpiList first before checking
EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST flag.
Test: Verified both single EFI_PEI_CORE_FV_LOCATION_PPI and multiple
PPIs in PpiList cases and both can boot with the PeiCore
specified by EFI_PEI_CORE_FV_LOCATION_PPI.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
We take great care to avoid GOT based relocations in EDK2 executables,
primarily because they are pointless - we don't care about things like
the CoW footprint or relocations that target read-only sections, and so
GOT entries only bloat the binary.
However, in some cases (e.g., when building the relocatable PrePi SEC
module in ArmVirtPkg with the CLANG38 toolchain), we may end up with
some GOT based relocations nonetheless, which break the build since
GenFw does not know how to deal with them.
The relocations emitted in this case are ADRP/LDR instruction pairs
that are annotated as GOT based, which means that it is the linker's
job to emit the GOT entry and tag it with an appropriate dynamic
relocation that ensures that the correct absolute value is stored into
the GOT entry when the executable is loaded. This dynamic relocation is
not visible to GenFw, and so populating the PE/COFF relocation section
for these entries is non-trivial.
Since each ADRP/LDR pair refers to a single symbol that is local to the
binary (given that shared libraries are not supported), we can actually
convert the ADRP/LDR pair into an ADRP/ADD pair that produces the symbol
address directly rather than loading it from memory. This leaves the
GOT entry in the binary, but since it is now unused, it is no longer
necessary to emit a PE/COFF relocation entry for it.
Acked-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1955
Refer to PCI express base specification Reversion 5.0, Version
1.0, Table 7-33, Supported Link Speeds Vector bit 3 indicate
the speed 16 GT/s and bit 4 indicate the speed 32 GT/s.
Add the support to shell command 'pci ...'.
Change the MaxLinkSpeed other values' result from 'Unknown'
to 'Reserved' to make the result align.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdRealTimeClockUpdateTimeout is now defined in MdeModulePkg.dec.
This is the only reason that causes PcAtChipsetPkg depends on
MdeModulePkg.
Move the PCD from MdeModulePkg.dec to PcAtChipsetPkg.dec removes
such dependency.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
There are three PCDs that may impact the behavior of each other in
SMM environment:
PcdCpuSmmProfileEnable
PcdHeapGuardPropertyMask in MdeModulePkg
PcdCpuSmmRestrictedMemoryAccess
The patch updates the comments in DEC file to document it.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Today's behavior is to always restrict access to non-SMRAM regardless
the value of PcdCpuSmmRestrictedMemoryAccess.
Because RAS components require to access all non-SMRAM memory, the
patch changes the code logic to honor PcdCpuSmmRestrictedMemoryAccess
so that only when the PCD is true, the restriction takes affect and
page table memory is also protected.
Because IA32 build doesn't reference this PCD, such restriction
always takes affect in IA32 build.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch changes PiSmmCpu driver to consume PCD
PcdCpuSmmRestrictedMemoryAccess.
Because the behavior controlled by PcdCpuSmmStaticPageTable in
original code is not changed after switching to
PcdCpuSmmRestrictedMemoryAccess.
The functionality is not impacted by this patch.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The patch adds a new X64 only PCD PcdCpuSmmRestrictedMemoryAccess.
The PCD indicates access to non-SMRAM memory is restricted to
reserved, runtime and ACPI NVS type after SmmReadyToLock.
MMIO access is always allowed regardless of the value of this PCD.
Loose of such restriction is only required by RAS components in X64
platforms.
The PCD value is considered as constantly TRUE in IA32 platforms.
When the PCD value is TRUE, page table is initialized to cover all
memory spaces and the memory occupied by page table is protected by
page table itself as read-only.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since TianoCore EDK2 commit d65f2cea36 ("ShellPkg/CommandLib: Locate
proper UnicodeCollation instance") in edk2 the UEFI Shell crashes if EFI
variable PlatformLang is not defined due to dereferencing gUnicodeCollation
gUnicodeCollation (= NULL) in ShellCommandRegisterCommandName().
Furthermore CommandInit() is leaking PlatformLang if
gUnicodeCollation != NULL.
Close the memory leak and use the first UnicodeCollation instance if
PlatfomLang is not defined.
Fixes: d65f2cea36 ("ShellPkg/CommandLib: Locate proper UnicodeCollation
instance")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=2138
Added checks for return parameters of GetSupportedTypes
function calls in InternalHstiFindAip to improve error handling.
An issue was observed on Dell Poweredge R740, where the Dell
PERC H740P controller UEFI driver returned InfoTypesBuffer = NULL,
InfoTypesBufferCount = 0 and caused an FreePool assert.
Signed-off-by: Jayanth Raghuram <Jayanth.Raghuram@Dell.com>
Cc: Wei G Liu <Wei_G_Liu@Dell.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2136
SecPlatformMain is a platform hook function which let platform does
some update. Some platform may adjust SecCoreData->PeiTemporaryRamBase
which caused former saved AllSecPpiList variable invalid.
This patch update the logic to get AllSecPpiList after SecPlatformMain.
If SecPlatformMain() returns no platform-specific PPI list, then there
is nothing to merge, so we don't need "AllSecPpiList" at all.
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2104
When UEFI Applications or UEFI Drivers are unloaded,
the PeCoffLoaderUnloadImageExtraAction() needs to unload
the image using FreeLibrary() if the image was successfully
loaded using LoadLibrrayEx().
This is a regression from the Nt32Pkg that supported
unloading applications and drivers as well as loading
the same application or driver multiple times.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Andrew Fish <afish@apple.com>
Tested-by: Tim Lewis <tim.lewis@insyde.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2103
Current CopyFileOnChange() and SaveFileOnChange() in
BaseTools\Source\Python\Common\Misc.py don't use the dedicated
long file path API to handle the file path strings and cannot
support the long file path copy and save in windows. This patch
enhances them to support the long file path copy and save
correctly.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Introduce PcdXenGrantFrames to replace a define in XenBusDxe and allow
the same value to be used in a different module.
The reason for the number of page to be 4 doesn't exist anymore, so
simply remove the comment.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-33-anthony.perard@citrix.com>
On a Xen PVH guest, none of the existing serial or console interface
works, so we add a new one, based on XenConsoleSerialPortLib, and
implemented via SerialDxe.
That is a simple console implementation that can work on both PVH
guest and HVM guests, even if it is rarely going to be used on HVM.
Have PlatformBootManagerLib look for the new console, when running as a
Xen guest.
Since we use VENDOR_UART_DEVICE_PATH, fix its description and coding
style.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-32-anthony.perard@citrix.com>
When running as a Xen PVH guest, there is no CMOS to read the memory
size from. Rework GetSystemMemorySize(Below|Above)4gb() so they can
work without CMOS by reading the e820 table.
Rework XenPublishRamRegions to also care for the reserved and ACPI
entry in the e820 table. The region that was added by InitializeXen()
isn't needed as that same entry is in the e820 table provided by
hvmloader.
MTRR settings aren't modified anymore, on HVM it's already done by
hvmloader, on PVH it is supposed to have sane default. MTRR will need
to be done properly but keeping what's already been done by programs
that have run before OVMF will do for now.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-24-anthony.perard@citrix.com>
The ACPI Timer isn't present in a PVH guest, but local APIC works on
both PVH and HVM.
Note that the use of SecPeiDxeTimerLibCpu might be an issue with a
driver of type DXE_RUNTIME_DRIVER. I've attempted to find out which of
the DXE_RUNTIME_DRIVER uses the TimerLib at runtime. I've done that by
replacing the TimerLib evaluation in
[LibraryClasses.common.DXE_RUNTIME_DRIVER] by a different one and
checking every module that uses it (with the --report-file=report
build option).
ResetSystemRuntimeDxe is calling the TimerLib API at runtime to do the
operation "EfiResetCold", so this may never complete if the OS have
disabled the Local APIC Timer.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-10-anthony.perard@citrix.com>
This patch allows the ResetVector to be run indenpendently from build
time addresses.
The goal of the patch is to avoid having to create RAM just below 4G
when creating a Xen PVH guest while being compatible with the way
hvmloader currently load OVMF, just below 4G.
Only the new PVH entry point will do the calculation.
The ResetVector will figure out its current running address by creating
a temporary stack, make a call and calculate the difference between the
build time address and the address at run time.
This patch copies and make the necessary modification to some other asm
files:
- copy of UefiCpuPkg/.../Flat32ToFlat64.asm:
Allow Transition32FlatTo64Flat to be run from anywhere in memory
- copy of UefiCpuPkg/../SearchForBfvBase.asm:
Add a extra parameter to indicate where to start the search for the
boot firmware volume.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-9-anthony.perard@citrix.com>
This patch changes the flash device image of OvmfXen to make it look
like it's an ELF. For this, we replace the empty embedded variable store
by a binary array, which is a ELF file header.
The ELF header explain to a loader to load the binary at the address
1MB, then jump to the PVH entry point which will be created in a later
patch. The header also includes a Xen ELF note that is part of the
PVH ABI.
That patch include OvmfXenElfHeaderGenerator.c which can be use to
regenerate the ELF header, but this will be a manual step.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-6-anthony.perard@citrix.com>
Introduce XenPlatformPei, a copy of OvmfPkg/PlatformPei without some
of QEMU specific initialization, Xen does not support QemuFwCfg.
This new module will be adjusted to accommodate Xen PVH.
fw_cfg dependents that have been removed, which are dynamically skipped
when running PlatformPei on Xen:
- GetFirstNonAddress(): controlling the 64-bit PCI MMIO aperture via the
(experimental) "opt/ovmf/X-PciMmio64Mb" file
- GetFirstNonAddress(): honoring the hotplug DIMM area
("etc/reserved-memory-end") in the placement of the 64-bit PCI MMIO
aperture
- NoexecDxeInitialization() is removed, so PcdPropertiesTableEnable and
PcdSetNxForStack are left constant FALSE (not set dynamically from
fw_cfg "opt/ovmf/PcdXxxx")
- MaxCpuCountInitialization(), PublishPeiMemory(): the max CPU count is
not taken from the QemuFwCfgItemSmpCpuCount fw_cfg key;
PcdCpuMaxLogicalProcessorNumber is used intact and
PcdCpuApInitTimeOutInMicroSeconds is never changed or used.
- InitializeXenPlatform(), S3Verification(): S3 is assumed disabled (not
consulting "etc/system-states" via QemuFwCfgS3Enabled()).
- InstallFeatureControlCallback(): the feature control MSR is not set
from "etc/msr_feature_control"
(also removed FeatureControl.c as there is nothing been executed)
Also removed:
- SMRAM/TSEG-related low mem size adjusting (PcdSmmSmramRequire is
assumed FALSE) in PublishPeiMemory(),
- QemuInitializeRam() entirely,
Xen related changes:
- Have removed the module variable mXen, as it should be always true.
- Have the platform PEI initialization fails if Xen has not been
detected.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-5-anthony.perard@citrix.com>
Introduce XenResetVector, a copy of OvmfPkg/ResetVector, with one
changes:
- SEC_DEFAULT_CR0: enable cache (bit 30 or CD set to 0)
Xen copies the OVMF code to RAM, there is no need to disable cache.
This new module will later be modified to add a new entry point, more
detail in a following commit "OvmfPkg/XenResetVector: Add new entry point
for Xen PVH"
Value FILE_GUID of XenResetVector have not changed compare to ResetVector
because it is a special value (gEfiFirmwareVolumeTopFileGuid).
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-4-anthony.perard@citrix.com>
OvmfXen is a copy of OvmfX64, removing VirtIO and some SMM.
This new platform will be changed to make it works on two types of Xen
guest: HVM and PVH.
Compare to OvmfX64, this patch:
- changed: PLATFORM_GUID, OUTPUT_DIRECTORY, FLASH_DEFINITION
- removed: VirtioLib class resolution
- removed: all UEFI_DRIVER modules for virtio devices
- removed: DXE_SMM_DRIVER and SMM_CORE lib class resolutions
- removed: DXE_SMM_DRIVER and SMM_CORE FDF rules
- removed: Everything related to SMM_REQUIRE==true
- removed: Everything related to SECURE_BOOT_ENABLE==true
- removed: Everything related to TPM2_ENABLE==true
- changed: PcdPciDisableBusEnumeration dynamic default flipped to TRUE
- changed: default FD_SIZE_IN_KB to 2M.
- reverted d272449d9e, "OvmfPkg: raise DXEFV size to 11 MB"
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1689
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190813113119.14804-3-anthony.perard@citrix.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Below code is current implementation:
if (MsrRegister[ProcessorNumber].Bits.Lock == 0) {
CPU_REGISTER_TABLE_WRITE_FIELD (
ProcessorNumber,
Msr,
MSR_IA32_FEATURE_CONTROL,
MSR_IA32_FEATURE_CONTROL_REGISTER,
Bits.Lock,
1
);
}
1. In first normal boot, the Bits.Lock is 0, 1 will be added
into the register table and then will set to the MSR.
2. Trig warm reboot, MSR value preserves. After normal boot phase,
the Bits.Lock is 1, so it will not be added into the register
table during the warm reboot phase.
3. Trig S3 then resume, the Bits.Lock change to 0 and Bits.Lock is
not added in register table, so it's still 0 after resume. This
is not an expect behavior. The expect value is the value should
always 1 after booting or resuming from S3.
The root cause for this issue is
1. driver bases on current value to insert the "set value action" to
the register table.
2. Some MSRs may reserve their value during warm reboot.
The solution for this issue is using new added macros for the MSRs which
preserve value during warm reboot.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2040
Add below new micros which test the current value before write the new
value. Only write new value when current value not same as new value.
CPU_REGISTER_TABLE_TEST_THEN_WRITE32
CPU_REGISTER_TABLE_TEST_THEN_WRITE64
CPU_REGISTER_TABLE_TEST_THEN_WRITE_FIELD
Also add below API:
CpuRegisterTableTestThenWrite
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Cc: Star Zeng <star.zeng@intel.com>
Reclaim may free page table pages that are required to handle current page
fault. This causes a page leak, and, after sufficent number of specific
page fault+reclaim pairs, we run out of reclaimable pages and hit:
ASSERT (MinAcc != (UINT64)-1);
To remedy, prevent pages essential to handling current page fault:
(1) from being considered as reclaim candidates (first reclaim phase)
(2) from being freed as part of "branch cleanup" (second reclaim phase)
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Krzysztof Rusocki <krzysztof.rusocki@intel.com>
The Fpdt driver (FirmwarePerformanceDxe) saves a memory address across
reboots, and then does an AllocatePage for that memory address.
If, on this boot, that memory comes from a Runtime memory bucket,
the MAT table is not updated. This causes Windows to boot into Recovery.
This patch blocks the memory manager from changing the page
from a special bucket to a different memory type. Once the buckets are
allocated, we freeze the memory ranges for the OS, and fragmenting
the special buckets will cause errors resuming from hibernate (S4).
The references to S4 here are the use case that fails. This
failure is root caused to an inconsistent behavior of the
core memory services themselves when type AllocateAddress is used.
The main issue is apparently with the UEFI memory map -- the UEFI memory
map reflects the pre-allocated bins, but the actual allocations at fixed
addresses may go out of sync with that. Everything else, such as:
- EFI_MEMORY_ATTRIBUTES_TABLE (page protections) being out of sync,
- S4 failing
are just symptoms / consequences.
This patch is cherry pick from Project Mu:
a9be767d9b
With the minor change,
1. Update commit message format to keep the message in 80 characters one line.
2. Remove // MU_CHANGE comments in source code.
3. Update comments style to follow edk2 style.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=2079
The Basetool CopyFileOnChange() and SaveFileOnChange()
functions might raise the IOError occasionally when build
in Windows with multi-process and build cache enabled.
The CopyFileOnChange() and SaveFileOnChange() might be invoked
in multiple sub-processes simultaneously, and this patch adds
global locks to sync these functions invoking which can
harden their reliability.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1951
Current build cache use the module's [self.Arch][self.Name]
info as the ModuleAutoGen object key in hash list and dictionary.
The [self.Arch][self.Name] is not safe as the module key because
there could be two modules with same module name and arch name in
one platform. E.g. A platform can override a module or library
instance in another different path, the overriding module can has
the same module name and arch name as the original one.
Directly use the ModuleAutoGen obj self as the key, because
the obj __hash__ and __repr__ attributes already contain the
full path and arch name.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1927
Current cache hash algorithm does not parse and generate
the makefile to get the accurate dependency files for a
module. It instead use the platform and package meta files
to get the module depenedency in a quick but over approximate
way. These meta files are monolithic and involve many redundant
dependency for the module, which cause the module build
cache miss easily.
This patch introduces one more cache checkpoint and a new
hash algorithm besides the current quick one. The new hash
algorithm leverages the module makefile to achieve more
accurate and precise dependency info for a module. When
the build cache miss with the first quick hash, the
Basetool will caculate new one after makefile is generated
and then check again.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1941
The two CHAR16 array ChildCountStr and DeviceCountStr is
defined to hold the decimal string data of UINTN. The max
of UINTN is 18446744073709551615 and it contain 20 characters.
So make their size to 21 CHAR16s to hold the string data with
a null-terminate.
UnicodeValueToStringS regard the value input as INT64, and
21 CHARs is enough to hold the lowest value with minus '-'.
Although the value shouldn't be such big.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Oleksiy <oleksiyy@ami.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Linson Augustine <Linson.augustine@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The local variable PpiArray[10] is declared in the middle
of the SEC module _ModuleEntryPoint() with its own scope.
However, PpiArray has a dangling reference to its location
on the stack after the scope is closed. This causes issues
with some compilers (e.g. XCODE5).
The fix is to move the declaration of PpiArray[10] to
the beginning of the function, so it is scoped correctly
for all references to this local variable and references
to its location.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
Disable TftpDynamicCommand for XCODE5 because this command
places HII content in an PE/COFF resource section that is not
supported by the XCODE5 tool chain, and the missing HII
content causes the load of this command to ASSERT().
Disable the LogoDxe module that places the logo bitmap in
a PE/COFF resource section that is not supported by the
XCODE5 tool chain, and the missing HII content causes
the load of this module to ASSERT().
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Andrew Fish <afish@apple.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Acked-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2056
The IA32 build of the EmulatorPkg for VS20xx does not boot
because the default value of PCD PcdPeiServicesTablePage
rarely succeeds to be mapped on IA32 Windows Host Environments.
Change the DEC default value for this PCD to a value that
is compatible with Windows and POSIX host environments for
IA32 and X64. For IA32 builds, this 64-bit PCD is truncated
to a 32-bit value.
PcdPeiServicesTablePage is changed from 0x1003000000 to
0x1013000000. With this new value, no boot failures are
observed. However, the use of this hard coded value can
potentially cause a boot failure if this address specified
by the PCD is already allocated in the user process.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Tested-by: Andrew Fish <afish@apple.com>
Initialize PageMapLevel5Entry at the beginning of the function.
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
OvmfPkg build failure wtih gcc 4.8.5 still exists at latest edk2 version.
The commit 46f8a68916 seems not to fix
the build failure completely.
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1837
The tool is designed to generate Windows Firmware Update Drivers,
the input is one drivername.cap with related parameters, the output
Windows Driver package are composed by drivername.cap, drivername.inf
and drivername.cat to update the single payload in device.
usage:
GenerateWindowsDriver [-h] [--output-folder OUTPUTFOLDER]
[--product-fmp-guid PRODUCTFMPGUID]
[--capsuleversion-dotstring CAPSULEVERSION_DOTSTRING]
[--capsuleversion-hexstring CAPSULEVERSION_HEXSTRING]
[--product-fw-provider PRODUCTFWPROVIDER]
[--product-fw-mfg-name PRODUCTFWMFGNAME]
[--product-fw-desc PRODUCTFWDESC]
[--capsule-file-name CAPSULEFILENAME]
[--pfx-file PFXFILE] [--arch ARCH]
[--operating-system-string OPERATINGSYSTEMSTRING]
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Kinney Michael D <michael.d.kinney@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
Add PCD PcdFmpDeviceStorageAccessEnable. If this PCD is
TRUE, then the Firmware Management Protocol supports access
to the firmware storage device. This is the default setting.
If FALSE, then Firmware Management Protocol services that
access the firmware storage device return EFI_UNSUPPORTED
except GetImageInfo(). Setting this value to FALSE produces
the smallest possible FmpDxe driver that still advertises the
updatable firmware component in the ESRT.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
* Add Capsule Update Policy Protocol to FmpDevicePkg
* Add CapsuleUpdatePolicyLib instance that uses the services
of the Capsule Update Policy Protocol
* Add module that produces the Capsule Update Policy
Protocol using the services of the CapsuleUpdatePolicyLib
class.
* Update FmpDevicePkg DSC to build the new library instance
and the new module and update builds of FmpDxe modules
to demonstrate the use of the different CapsuleUpdatePolicyLib
instances.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
buildoptions is used by build.py and TargetTxtClassObj.py
Move buildoptions.py to Common folder so that
build tool and ECC tool work fine.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This commit will fix a GCC 4.8.5 build failure introduced by commit
b3527dedc3.
PageMapLevel5Entry may be uninitialized in original code, which means
uninitialized pointer will be modified at some circumstance.
So relocate the operation of PageMapLevel5Entry++ in order to make sure
the pointer could be modified only when it is initialized.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
This commit adds EDKII_UFS_HC_PLATFORM_PROTOCOL implementation
in UfsPassThruDxe driver in version 1. Driver assumes that at
most one instance of the protocol exists in the system. Presence
of the protocol is not mandatory.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
Private data has been refactored to use EDKII_UFS_HC_INFO structure
to store host controller capabilities and version
information. Getting host controller data has been moved
into single place and is done before host controller enable.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1343
EDKII_UFS_HC_PLATFORM_PROTOCOL will allow the platform to inject
platform specific logic into standard UFS flows. Right now we
support callbacks pre and post host controller enable and pre
and post link startup. Provided callbacks allow the platform
driver to inject UIC programming after HCE is set which is
a standard initialization step covered by UFS specification as
well as cover some additional use cases during other callbacks.
For instance platform driver may switch to fast mode after link
startup.
We also allow the platform to override host controller capabilities
and version which might be useful to manage silicon bugs or
allow testing experimental features from new versions of the
specification.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2049
ShellPkg\Library\UefiShellLevel2CommandsLib\Cp.c line 104 and
ShellPkg\Library\UefiShellLevel2CommandsLib\Mv.c line 640, the
pointer variable Response may be a NULL pointer. So we should
make sure that it isn't NULL before dereference it.
If Response is NULL that indicates a EFI_OUT_OF_RESOURCES
error, directly return SHELL_ABORTED.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Modify the SRAT parsing logic to prevent reading past the table buffer
length provided.
Check if the Static Resource Allocation Structure's buffer fits in the
SRAT table buffer before its contents are dumped.
Prevent buffer overruns when reading the Static Resource Allocation
Structure's header.
References:
- ACPI 6.3, January 2019, Section 5.2.16
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the PPTT table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Check if the Number of Private Resources specified in the Processor
Hierarchy Node (Type 0) is possible given the Type 0 Structure's buffer
length.
Make sure that the processor topology structure's buffer fits in the
PPTT table buffer before its contents are dumped.
Prevent buffer overruns when reading the processor topology structure's
header.
References:
- ACPI 6.3, January 2019, Section 5.2.29
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the parsing logic to prevent reading past the MADT table buffer
length provided when parsing the Interrupt Controller Structure header.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the IORT table parsing logic to prevent reading past the buffer
lengths provided.
Change DumpIortNodeIdMappings() function's signature and implementation
to simplify buffer overrun prevention. Update all calls to this
function accordingly.
Modify the parser for each type of IORT node such that the offset from
the start of the node's buffer is tracked as the parsing function is
executed. Again, this change helps prevent buffer overruns.
Test that the IORT node buffer fits in the table buffer before the
node's buffer contents are dumped.
References:
- IO Remapping Table (Issue D), Platform Design Document, March 2018
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the GTDT table parsing logic to prevent reading past the ACPI
buffer lengths provided and to make it consistent with other table
parsers. This includes converting the do-while loop in ParseAcpiGtdt()
into a while loop.
Remove a check which ensures that the entire Platform GT Block
Structure buffer has been parsed. The ACPI specification does not ban
from defining buffers which are larger than the size indicated by the
count and sizes of substructures which constitute it.
Change the data type of the Length parameter to the DumpGTBlock()
function to reflect the width of the respective ACPI structure's
field.
References:
- ACPI 6.3, January 2019, Table 5-124
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Modify the DBG2 table parsing logic to prevent reading past the ACPI
buffer lengths provided.
Modify the signature of the DumpDbgDeviceInfo() function to make it
consistent with the ACPI structure processing functions in other
acpiview parsers. Now, the length of the Debug Device Information
Structure is read before the entire structure is dumped.
This refactoring change makes it easier to stop reading beyond the
DBG2 table buffer if the Debug Device Information Structure Buffer
does not fit in the DBG2 buffer.
For processing the first two fields of the Debug Device Information
Structure (to get the length) a new ACPI_PARSER array is defined.
References:
- Microsoft Debug Port Table 2 (DBG2), December 10, 2015
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@inte.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2051
Original code GetConfigTable for AddrPtr first, if failed,
InstalConfigTable with allocated AddrPtr. So the AddrPtr
should not be NULL and the NULL pointer dereference case
should be false positive. This patch is just to address
the case raised from static analysis.
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1875
1. Separate the AutoGen.py into 3 small py files.
One is for AutoGen base class, one is for WorkspaceAutoGen class
and PlatformAutoGen class, and the one for ModuleAutoGen class.
2. Create a new class DataPipe to store the Platform scope settings.
Create a new class PlatformInfo to provide the same interface
as PlatformAutoGen. PlatformInfo class is initialized by
DataPipe instance.
Create a new class WorkspaceInfo to provide the same interface
as WorkspaceAutoGen. WorkspaceInfo class is initialized by
DataPipe instance.
3. Change ModuleAutoGen to depends on DataPipe, PlatformInfo and
WorkspaceInfo. Remove the dependency of ModuleAutoGen to PlatformAutoGen.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1928
1. Implement OpenSSL HKDF wrapped function in CryptHkdf.c file.
2. Implement stub implementation function in CryptHkdfNull.c file.
3. Add wrapped HKDF function declaration to BaseCryptLib.h file.
4. Add CryptHkdf.c to module information BaseCryptLib.inf file.
5. Add CryptHkdfNull.c to module information PeiCryptLib.inf,
RuntimeCryptLib.inf and SmmCryptLib.inf
Signed-off-by: Gary West <Gary.West@intel.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
The patch moves all files under UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register using following detailed approaches:
1. Move UefiCpuPkg/Include/Register/Amd/ to
MdePkg/Include/Register/Amd folder.
2. Move remaining in UefiCpuPkg/Include/Register/ to
MdePkg/Include/Register/Intel folder.
3. Create wrapper header files under UefiCpuPkg/Include/Register/
to include the accordingly files in MdePkg/Include/Register/Intel.
This is to avoid build break because code in other repos like
edk2-platform includes the file from UefiCpuPkg.
The wrapper header files will be removed after all consumers code
is updated.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
DxeIpl is responsible to create page table for DXE phase running
either in long mode or in 32bit mode with certain protection
mechanism enabled (refer to ToBuildPageTable()).
The patch updates DxeIpl to create 5-level page table for DXE phase
running in long mode when PcdUse5LevelPageTable is TRUE and CPU
supports 5-level page table.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Today's code defines macros like CR0_PG, CR0_WP, CR4_PSE, CR4_PAE
when checking whether individual bits are set in CR0 or CR4 register.
The patch changes the code to use IA32_CR0 and IA32_CR4 structure
defined in MdePkg/Include/Library/BaseLib.h so that the module
local macros can be removed.
There is no functionality impact to this change.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2008
MpInitLib is the library that's responsible to wake up APs to provide
MP PPI and Protocol services.
The patch synchronizes BSP's CR4.LA57 to each AP's CR4.LA57.
Without this change, AP may enter to GP fault when BSP's 5-level page
table is set to AP during AP wakes up.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1525
The patch is to merge multiple FMP instances into single ESRT entry
when they have the same GUID.
The policy to LastAttemptStatus/LastAttemptVersion of ESRT entry is:
If all the LastAttemptStatus are LAST_ATTEMPT_STATUS_SUCCESS, then
LastAttemptVersion should be the smallest of LastAttemptVersion. If
any of the LastAttemptStatus is not LAST_ATTEMPT_STATUS_SUCCESS,
then the LastAttemptVersion/LastAttemptStatus should be the values
of the first FMP instance whose LastAttemptStatus is not
LAST_ATTEMPT_STATUS_SUCCESS.
To detect possible duplicated GUID/HardwareInstance, a table of
GUID/HardwareInstance pairs from all the EFI_FIRMWARE_IMAGE_DESCRIPTORs
from all FMP instances is built. If a duplicate is found, then generate
a DEBUG_ERROR message, generate an ASSERT(), and ignore the duplicate
EFI_FIRMWARE_IMAGE_DESCRIPTOR.
Add an internal worker function called FmpGetFirmwareImageDescriptor()
that retrieves the list of EFI_FIRMWARE_IMAGE_DESCRIPTORs from a single
FMP instance and returns the descriptors in an allocated buffer. This
function is used to get the descriptors used to build the table of
unique GUID/HardwareInstance pairs. It is then used again to generate
the ESRT Table from all the EFI_FIRMWARE_IMAGE_DESCRIPTORs from all the
FMP instances. 2 passes are performed so the total number of
descriptors is known. This allows the correct sized buffers to always
be allocated.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
Make sure all libs that should be dynamically linked
are dynamically linked when XCODE5 compiler is used.
A previous change introduced the following pragma:
#pragma GCC visibility push (hidden)
When the EmulatorPkg is built using XCODE5 toolchain
for X64, this pragma is included and it generates a
linker error when building the Unix Host module. This
change uses !defined(__APPLE__) to prevent the use of
this pragma when building EmulatorPkg/Unix/Host.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=2046
* Clean up XCODE5 IA32 [BuildOptions] and fix IA32
X11 include path.
* Add -DEFIAPI=__attribute__((ms_abi)) to X64 XCODE5
[BuildOptions]
* Use -target x86_64-apple-darwin for X64 XCODE5
[BuildOptions]
* Add Wl,-no_pie to X64 XCODE5 [BuildOptions]
* Address function type mismatch reported by XCODE5
in reverse gasket callback between UEFI ABI and
MacOS ABI. Use a UINTN to pass function address
to assembly code.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This debug message may be called by BSP and APs. It may
caused ASSERT when APs call this debug code.
In order to avoid system boot assert, Remove this debug
message.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
This debug message may be called by BSP and APs. It may
caused ASSERT when APs call this debug code.
In order to avoid system boot assert, Remove this debug
message.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
1.Remove "out" attribute for " Buffer" parameter in function header.
2.Add "out" attribute for " Token" parameter in function header.
3.Update ProcedureArgument to ProcedureArguments.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
For all other bcfg commands the "#" (option number) argument(s) are
treated as hexedecimal values regardless of whether or not they are
prefixed by "0x". This change fixes '-opt' to handle its "#"
(option number) argument consistently with the other commands.
Making this change removes a potential footgun whereby a user that
has been using a number without a "0x" prefix with other bcfg
commands finds that, on using that exact same number with '-opt', it
has this time unexpectedly been interpreted as a decimal number and
they have modified (corrupted) an unrelated load option. For
example, a user may have been specifying "10" to other commands to
have them act on the 16th option (because simply "10", without any
prefix, is how 'bcfg boot dump' displayed the option number for the
16th option). Unfortunately for them, if they also use '-opt' with
"10" it would unexpectedly and inconsistently act on the 10th option.
CC: Jaben Carsey <jaben.carsey@intel.com>
CC: Ray Ni <ray.ni@intel.com>
Signed-off-by: Jonathan Watt <jwatt@jwatt.org>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Until now, during the USB device enumeration when its PortState
USB_PORT_STAT_CONNECTION bit was not set, the stack was not informed
that the device is not present. Fix that by returning appropriate
error code.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1982
MpInitLibInitialize in MpLib.c will be invoked on both PEI and DXE
CPU code, MicrocodeDetect would be performed twice and copy
Microcode from flash to memory twice as well, which consider as
duplicate work to lead longer boot time.
This patch just use microcode memory copied in PEI phase if exist.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Move Performance Monitoring Counter Group (PMCG) node ID mapping count
validation from the core IORT acpiview parser logic to a dedicated
function. Now, the pointer to the validation function is passed to the
IortNodePmcgParser[] ACPI_PARSER array.
This check does not affect the flow of IORT parsing and is limited to
a single table field in scope, therefore, it is better to keep it away
from the code responsible for traversing the table.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Split the Interrupt Controller Structure length validation in the
acpiview UEFI shell tool into two logical parts:
1. Ensuring MADT table parser forward progress.
2. Preventing MADT table buffer overruns.
Also, make the condition for infinite loop detection applicable to
all types of Interrupt Controller Structures (for all interrupt models
which can be represented in MADT). Check if the controller length
specified is shorter than the byte size of the first two fields
('Type' and 'Length') present in every valid Interrupt Controller
Structure.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
List ParseAcpi() function arguments one per line in order to make this
function call consistent with ParseAcpi() calls in other ACPI table
parsers.
Also, notify the user that XsdtAddress value of 0 results in RSDP
parsing being terminated and that the XSDT table will not be processed.
This effectively means that no more ACPI tables will be parsed because
of this RSDP table content error.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove a call to ParseAcpi() responsible for getting the XSDT table
length. This call is not needed because the ACPI table buffer length is
provided as an input argument to the ParseAcpiXsdt() function.
Modify remaining code to use the AcpiTableLength argument of the
ParseAcpiXsdt() function instead of a global static variable.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Modify the signature of the DumpGasStruct() function to include the
buffer length parameter and to return the number of bytes parsed by
the function.
This way it becomes possible to prevent buffer overruns when dumping
Generic Address Structure's (GAS) fields in the acpiview table
parsers.
Update all existing DumpGasStruct() calls in acpiview to add the
length argument.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2007
The following two PCI Capability Structure registers are updated as per
the PCI Base Specification Revision 4:-
(1) The PCI Device capability register 2(PCI_REG_PCIE_DEVICE_CAPABILITY2)
needs to be upgraded for the PCI features like -
LN system CLS (LnSystemCLS),
10b Tag completer/requester register fields
(TenBitTagCompleterSupported, TenBitTagRequesterSupported),
Emergency power reduction support and initialization requirement
(EmergencyPowerReductionSupported,
EmergencyPowerReductionInitializationRequired),
and FRS support (FrsSupported ).
(2) The PCI Device Control register 2(PCI_REG_PCIE_DEVICE_CONTROL2) needs
to be upgraded for the -
Emergency power reduction request enabling
(EmergencyPowerReductionRequest), and also the 10b Extended Tag
enabling (TenBitTagRequesterEnable).
The following two are defined as per the PCI Express Base Specification
Revision 2.1:-
(1) Defined macro definitions for all the ranges of Maximum Payload Sizes
and Maximum Read Request Sizes register fields
(2) Defined macro definitions for all the ranges of Completion Timeout
value.
Signed-off-by: Ashraf Javeed <ashraf.javeed@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In commit 1fce963d89 we reduced the level of information printed
by PeCoffLoaderRelocateImageExtraAction() but we did not update the
similar PeCoffLoaderUnloadImageExtraAction() function.
PeCoffLoaderUnloadImageExtraAction() prints helpful debugger commands
for source level debugging. These messages should not be printed on the
EFI_D_ERROR level; they don't report errors. Change the debug level
(bitmask, actually) to DEBUG_LOAD | DEBUG_INFO, because the messages are
printed in relation to image loading, and they are informative.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Andrew Jones <drjones@redhat.com>
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Specify the firmware to use via the newer '-drive if=pflash' syntax
which allows specifying the raw format parameter. This
avoids warnings with newer version of QEMU.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
$ADD_QEMU_HDA was added because QEMU used to refuse to run without a
disk. Since newer versions run without any disks, remove it.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 30f6148546.
Commit 30f6148546 causes a build failure, when building for IA32:
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c: In function
> 'PerformRemainingTasks':
> UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c:1440:9: error:
> 'mCpuSmmStaticPageTable' undeclared (first use in this function)
> if (mCpuSmmStaticPageTable) {
"mCpuSmmStaticPageTable" is an X64-only variable. It is defined in
"X64/PageTbl.c", which is not linked into the IA32 binary. We must not
reference the variable in such code that is linked into both IA32 and X64
builds, such as "PiSmmCpuDxeSmm.c".
We have encountered the same challenge at least once in the past:
- https://bugzilla.tianocore.org/show_bug.cgi?id=1593
- commit 37f9fea5b8 ("UefiCpuPkg\CpuSmm: Save & restore CR2 on-demand
paging in SMM", 2019-04-04)
The right approach is to declare a new function in "PiSmmCpuDxeSmm.h", and
to provide two definitions for the function, one in "Ia32/PageTbl.c", and
another in "X64/PageTbl.c". The IA32 implementation should return a
constant value. The X64 implementation should return
"mCpuSmmStaticPageTable". (In the example named above, the functions were
SaveCr2() and RestoreCr2().)
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: push revert immediately, due to build breakage that
would have been easy to catch before submitting the patch]
Commit c60d36b4d1
* UefiCpuPkg/SmmCpu: Block access-out only when static paging is used
updated page fault handler to treat SMM access-out as allowed
address when static paging is not used.
But that commit is not complete because the page table is still
updated in SetUefiMemMapAttributes() for non-SMRAM memory. When SMM
code accesses non-SMRAM memory, page fault is still generated.
This patch skips to update page table for non-SMRAM memory and
page table itself.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=2018
Current FSP SEC_IDT_TABLE structure is not natural aligned:
typedef struct _SEC_IDT_TABLE {
EFI_PEI_SERVICES *PeiService;
UINT64 IdtTable[];
} SEC_IDT_TABLE;
Compiler will insert DWORD padding between 2 elements and
GetPeiServicesTablePointer() in early phase then always
returns padding data from stack, which was not reset to 0
in SecMain.
Solution is to align FSP SEC_IDT_TABLE structure to UefiCpuPkg
to have UINT64 as PeiService field and reset it to 0.
Test: Verified on internal platform and booting successfully
with FSP API mode.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Enable multithreaded builds by default when building OvmfPkg
using build.sh.
This can drastically reduce build times. For example, on a
modern ThreadRipper system the time required to build decreases
from 3 minutes to 1 minute.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This is a (very minor) optimization: `pwd` runs the command (even as a
built-in), whereas $PWD simply evaluates the value of the variable.
ALso, modern scripts should generally use $(...) to run commands,
instead of `...`.
Signed-off-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Message-Id: <20190716165538.57960-1-rebecca@bsdio.com>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The BaseTools build feature introduced for TianoCore#1804 / in commit
1fa6699e6c ("BaseTools: Add a checking for Sources section in INF file",
2019-06-10) logs some (non-fatal) warnings about unlisted internal header
files. List those files explicitly.
Note: header files are added in lexicographical order only if the
underlying INF file already keeps the [Sources] and [LibraryClasses]
sections in lexicographical order. Otherwise, header files are added in
rough "logical" order.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=2003
lstrip(parameter) do the match based on the char
in parameter but not only the whole parameter string.
In GenMake line 1082,
CmdSign.lstrip('/Fo') will strip the '/' or
'F' or 'o' on the left of CmdSign. This is not expected.
This patch is going to fix such issue.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Replace multple use of literal values for GT Block Timer Frame
count/number validation with a macro definition.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Remove redundant forward function declarations by repositioning
blocks of code. This way the code structure is consistent across
ACPI table parsers and the code becomes more concise.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Add comment describing new F: and X: tags for associating maintainership
sections with specific filesystem paths, including wildcards.
Add global section associating *all* code with devel@edk2.groups.io,
with a default '*' F: tag directing all modifications that do not hit a
rule to the stewards.
Also tag all files in top directory as maintained by the stewards.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1972
AP calls CollectProcessorData() to collect processor info.
CollectProcessorData function finally calls PcdGetSize function to
get DynamicPCD PcdCpuFeaturesSetting value. PcdGetSize will use
PeiServices table which caused below assert info:
Processor Info: Package: 1, MaxCore : 4, MaxThread: 1
Package: 0, Valid Core : 4
ASSERT [CpuFeaturesPei] c:\projects\jsl\jsl_v1193\Edk2\MdePkg\Library
\PeiServicesTablePointerLibIdt\PeiServicesTablePointer.c(48):
PeiServices != ((void *) 0)
This change uses saved global pcd size instead of calls PcdGetSize to
fix this issue.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1968
The new VS2012 build failure is caused by 7a0df26.
xxx\registercpufeatureslib\dxeregistercpufeatureslib.c(258) :
warning C4701: potentially uninitialized local variable 'MpEvent' used
It is a false positive alarm.
MpEvent is assigned at line 238 and will be used at line 258, both
lines are controlled by "if (CpuFeaturesData->NumberOfCpus > 1)".
This patch initializes MpEvent to suppress incorrect compiler/analyzer
warnings.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The EDK II C Coding Standards Specification (v2.20) strongly discourages
variable declarations in nested block scope:
5 Source Files
5.4 Code File Structure
5.4.1 Scoping Rules
5.4.1.1 Scope
> Block (local) Scope
>
> [...]
>
> Data declarations may follow the opening brace of a compound statement,
> regardless of nesting depth, and before any code generating statements
> have been entered. Other than at the outermost block of a function body,
> this type of declaration is strongly discouraged.
Hoist such variable declarations in Base64Decode() to the outermost
function scope.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Zhichao Gao <zhichao.gao@intel.com>
Fixes: 35e242b698
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1980
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Rebecca Cran <rebecca@bsdio.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daude <philmd@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1937
EFI MM MP Protocol is defined in the PI 1.5 specification.
The MM MP protocol provides a set of functions to allow execution of
procedures on processors that have entered MM. This protocol has the
following properties:
1. The caller can invoke execution of a procedure on a processor, other
than the caller, that has also entered MM. Supports blocking and
non-blocking modes of operation.
2. The caller can invoke a procedure on multiple processors. Supports
blocking and non-blocking modes of operation.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Building with python3.8 shows a warning like:
SyntaxWarning: invalid escape sequence \(
GuidName = re.compile("\(GUID=[-a-fA-F0-9]+")
It seems harmless, but it's easy enough to fix: mark the string as
raw with the 'r' prefix like is used elsewhere in the file
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Fixes and assert seen when running ls under the shell. It appears the
assert was added in:
commit 99849a906e
ShellPkg/ls: Display the file time in local time.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
ToolDefinitionFile is generated by PlatformAutoGen.ToolDefinition()
Code assume ToolDefinition is always called before using
ToolDefinitionFile, but in some cases, it's not true.
This patch is to fix this issue.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PL031 interrupt mask register (IMSC) is not very clearly documented
in the PL031 specification. However, bit 0 (RTCIMSC) indicates whether
interrupts are enabled, not disabled.
So before this commit, we were actually *enabling* interrupts for the RTC.
This patch changes the logic to instead disable interrupts when they
are not disabled already.
Signed-off-by: Alexander Graf <graf@amazon.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Per SDM, for IA-32e 4-KByte paging, there are four layers in the page
table structure:
1. PML4
2. Page-Directory-Pointer Table (PDPT)
3. Page-Directory (PD)
4. Page Table (PT)
The patch changes the local variable names and comments to use
"PML4", "PDPT", "PD", "PT" to better align to terms used in SDM.
There is no functionality impact for this change.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
This issue happens when using Structured PCD.
Build tool use set to store the cflags for compile PcdValueInit.c,
that is the order of cflags is disorder.
This patch make -U, /U flags appear before -D, /D
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 3c59d94637 ("BaseTools/FCE: Add a tool FCE") added a new tool
that is always built. Pre-existing tools locate the makefile includes
with relative paths, but FCE uses EDK_TOOLS_PATH, adding a new dependency
on having sourced edksetup.sh before building BaseTools.
Change FCE GNUmakefile to match other tools.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
(a) OvmfPkg first had to resolve the TpmMeasurementLib class -- for
SECURE_BOOT_ENABLE only -- when the DxeImageVerificationLib instance
became dependent on TpmMeasurementLib. For details, refer to commit
0d28d286bf ("OvmfPkg: resolve TpmMeasurementLib dependency
introduced in r14687", 2013-09-21).
(b) At the time, only one instance of TpmMeasurementLib existed, namely
DxeTpmMeasurementLib. This lib instance didn't do anything -- like it
was desirable for OVMF --, because OVMF didn't include any Tcg / TrEE
protocol implementations.
(c) In commit 308521b133 ("MdeModulePkg: Move TpmMeasurementLib
LibraryClass from SecurityPkg", 2015-07-01), TpmMeasurementLibNull was
introduced.
(d) In commit 285542ebbb ("OvmfPkg: Link AuthVariableLib for following
merged variable driver deploy", 2015-07-01), a TpmMeasurementLib
resolution became necessary regardless of SECURE_BOOT_ENABLE. And so
TpmMeasurementLib was resolved to TpmMeasurementLibNull in OVMF, but
only in the non-SECURE_BOOT_ENABLE case. This step -- possibly, the
larger series containing commit 285542ebbb -- missed an opportunity
for simplification: given (b), the DxeTpmMeasurementLib instance
should have been simply replaced with the TpmMeasurementLibNull
instance, regardless of SECURE_BOOT_ENABLE.
(e) In commit 1abfa4ce48 ("Add TPM2 support defined in trusted computing
group.", 2015-08-13), the TrEE dependency was replaced with a Tcg2
dependency in DxeTpmMeasurementLib.
(f) Starting with commit 0c0a50d6b3 ("OvmfPkg: include Tcg2Dxe module",
2018-03-09), OVMF would include a Tcg2 protocol implementation,
thereby satisfying DxeTpmMeasurementLib's dependency. With
TPM2_ENABLE, it would actually make sense to consume
DxeTpmMeasurementLib -- however, DxeTpmMeasurementLib would never be
used without SECURE_BOOT_ENABLE.
Therefore, we have the following four scenarios:
- TPM2_ENABLE + SECURE_BOOT_ENABLE: works as expected.
- Neither enabled: works as expected.
- Only TPM2_ENABLE: this build is currently incorrect, because
Variable/RuntimeDxe consumes TpmMeasurementLib directly, but
TpmMeasureAndLogData() will never reach the TPM because we link
TpmMeasurementLibNull into the variable driver. This is a problem from
the larger series containing (f).
- Only SECURE_BOOT_ENABLE: this build works as expected, but it is
wasteful -- given that the protocol database will never contain Tcg2
without TPM2_ENABLE, we should simply use TpmMeasurementLibNull. This is
a problem from (d).
Resolving TpmMeasurementLib to DxeTpmMeasurementLib as a function of
*only* TPM2_ENABLE, we can fix / optimize the last two cases.
v2:
- Amend the title and description suggested by Laszlo
- Move TpmMeasurementLib to the existed TPM2_ENABLE block
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190704040731.5303-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
ArmVirtPkg was created before we introduced the Package Reviewer (R:)
role in Maintainers.txt. However, we have always had an informal
agreement that if Ard or Laszlo is absent, I can review patches by
the still present one for going into ArmVirtPkg.
Plus, as one of the ArmPkg maintainers, it makes sense for me to have
better visibility of goings-on in ArmVirtPkg.
So let's formalise that, and add myself as a Package Reviewer, to be
CC:d on patches (while not taking up full maintainer responsibilities).
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Make the -h command line option a binary flag. Now, colour
highlighting is enabled whenever this flag is set (stateless),
instead of being dependent on previous acpiview command
invocations.
By removing the parameter required with the -h flag the command
line parsing logic becomes simpler.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Remove redundant whitespace characters at the beginning of the strings
describing IORT table field names.
When dumping ACPI table contents, the indentation level for printing
field names is controled using the 'Indent' argument to the 'ParseAcpi'
function. In the IORT acpiview parser, both 'Indent' and extra
whitespace characters are used for indentation, which results in
excess indentation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
According to the acpiview documentation, the -v flag enables verbose
output and it is set on default.
Moreover, the acpiview UEFI shell tool dumps the same output with
and without this flag set.
Therefore this patch removes the superfluous -v flag from allowed
command line parameters.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The current documentation for the acpiview UEFI shell tool states
that the '-c' flag enables consistency checks on ACPI table data.
However, these checks are enabled anyway by default.
This patch keeps ACPI table validation as a default option, but it
makes it possible to turn ACPI table validation off by setting the
newly-introduced '-q' flag. Consequently, the '-c' flag is removed.
The remaining code changes in this patch make a number of consistency
checks optional (but enabled by default):
1. ACPI table field offset mismatch.
2. ACPI table field validation functions provided in the ACPI_PARSER
arrays.
3. Table checksum computation.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Print an extra newline character at the end DBG2 table parsing in order
to make the output resemble the one for other ACPI table parsers.
With this change, there is now a blank line between the DBG2 table dump
and the 'Table Statistics' section.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Move printing double newline character ('\n\n') from the beginning of
ACPI table checksum validation message to the end of the raw binary
data dump.
This way acpiview table dump looks similar regardless of whether Table
Checksum is validated or not.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Acpiview currently allows displaying help info by specifying both
-? and /? flags. This patch removes /? from valid command line
flags that can be passed to the acpiview tool, as this
flag is not used for such purpose in other UEFI shell commands.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Calling DisconnectController() on children isn't part of the job of
EFI_DRIVER_BINDING_PROTOCOL.Stop() as it only needs to deallocate
resources allocated in Start(). The disconnection will happen when
both DevicePath and XenBus protocols gets uninstalled.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190701111403.7007-1-anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
In XenBusDxe, the XenBusAddDevice() opens the gXenIoProtocolGuid on
behalf of child controllers. It is never closed and prevents us from
uninstalling the protocol.
Close it where we stop all the children in XenBusDxe->Stop().
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190701105012.25758-1-anthony.perard@citrix.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1678
Use the PcdPlatformRecoverySupport to control the function
of platform recovery in BDS.
First, set the variable's ("OsIndicationsSupported")
EFI_OS_INDICATIONS_START_PLATFORM_RECOVERY bit base on the pcd.
It would affect the variable "OsIndications".
While the platform does not support the platform recovery,
it is inappropriate to set a PlatformRecovery#### variable. So
skip setting the variable. But it should remain the behavior of
booting from a default file path (such as \EFI\BOOT\BOOTX64.EFI)
to be compatible with the previous version UEFI spec.
Add memory check before build platform default boot option. If
fail to allocate memory for the defualt boot file path, put the
system into dead loop to indicate it is unable to boot.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
Implement support for GetOperatingParamters notify phase
in SdMmcHcDxe driver. GetOperatingParameters notify phase
is signaled before we start card detection and initialization.
Code has been updated for both eMMC and SD card controllers to
take into consideration those new parameters. Initialization process
has been divided into 2 steps. In the first step we bring the link
up to the point where we can get card identification data(Extended
CSD in eMMC case and SWITCH command response in SD card case). This
data is later used along with controller capabilities and operating
parameters passed in GetOperatingParameters phase to choose preferred
bus settings in GetTargetBusSettings function. Those settings are later
on to start bus training to high speeds. If user passes incompatible
setting with selected bus timing driver will assume it's standard behavior
with respect to that setting. For instance if HS400 has been selected as a
target bus timing due to card and controller support bus width setting of
4 and 1 bit won't be respected and 8 bit setting will be chosen instead.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
https://bugzilla.tianocore.org/show_bug.cgi?id=1882
The new notify phase allows platform to configure additional
bus parameters in addition to parameters that can already be configured
with capability override. Specifically we allow to configure bus width,
clock frequency and driver strength. If platform doesn't wish to configure
some of the parameters it can left it on default values and driver will
assume it's standard behavior with respect to those parameters.
The definition of the SD_MMC_BUS_MODE has been extended to
incorporate SD card default speed and high speed.
Tests on Marvell boards were also performed by Marcin Wojtas
<mw@semihalf.com>:
https://edk2.groups.io/g/devel/message/42999
Board 1 (out of tree): SD - OK, MMC - OK
Board 2: (Armada80x0McBin): SD - OK, MMC - OK
Board 3: (Armada70x0Db): SD - problems, MMC - OK
Please note that the problem on Armada70x0Db SD devices are introduced by
adding new types of SD bus modes, a subsequent patch within edk2-platforms
repository will be proposed to address it.
(More details can be referred from the above link.)
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Regression-tested-by: Sumit Garg <sumit.garg@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1341
Since UFS specification requires the data buffer specified
in PRDT to be DWORD aligned in size we had a code in
UfsInitUtpPrdt that aligned the data buffer by rounding down
the buffer size to DWORD boundary. This meant that for SCSI
commands that wanted to perform unaligned data transfer(such as
SENSE command) we specified to small buffer for the data to fit
and transfer was aborted. This change introduces code that allocates
auxiliary DWORD aligned data buffer for unaligned transfer. Device
transfers data to aligned buffer and when data transfer is over driver
copies data from aligned buffer to data buffer passed by user.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Port the [LibraryClasses], [PcdsFixedAtBuild] and [Components] settings
that are related to NETWORK_TLS_ENABLE from OvmfPkg to ArmVirtPkg.
ArmVirtXen is not modified because it doesn't include the edk2 network
stack.
(This change is now simpler than it would have been when TianoCore#1009
was originally filed, due to ArmVirtPkg consuming the NetworkPkg include
fragments meanwhile, from TianoCore#1293 / commit 157a3b1aa50f.)
The usage hints from "OvmfPkg/README", section "HTTPS Boot", apply.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gary Lin <glin@suse.com>
Cc: Guillaume GARDET <guillaume.gardet@arm.com>
Cc: Julien Grall <julien.grall@arm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1009
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Guillaume Gardet <guillaume.gardet@arm.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1834
1)Add arguments "--embedded-driver" to support embedded driver
in command line.
2)Add arguments "--update-image-index" to identify ImageIndex
within the device in command line.
3)Add arguments "-j JSONFILE" to support multiple payloads and
embedded drivers with JSON file.
The update is in a backwards compatible manner, so all command
line options to support single payload are still supported. But
all the options associated with multiple payloads should be
provided in a JSON file.
Cc: Bob Feng <bob.c.feng@intel.com>
Signed-off-by: Eric Jin <eric.jin@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1934
0x0 MicrocodeBegin MicrocodeEntry MicrocodeEnd 0xffffffff
|--------------|---------------|---------------|---------------|
valid TotalSize
TotalSize is only valid between 0 and (MicrocodeEnd - MicrocodeEntry).
So add '(UINTN)MicrocodeEntryPoint > (MAX_ADDRESS - TotalSize)' before
'((UINTN)MicrocodeEntryPoint + TotalSize) > MicrocodeEnd' to make sure
((UINTN)MicrocodeEntryPoint + TotalSize) wouldn't overflow.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
In current implementation we are checking for device presence every
time we execute UIC command. To make UfsExecUicCommands more generic
checking device presence has been moved to UfsDeviceDetection.
Signed-off-by: Mateusz Albecki <mateusz.albecki@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1844
The commit will remove the below modules from PcAtChipsetPkg:
* PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf
* PcAtChipsetPkg/8254TimerDxe/8254Timer.inf
* PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
They are considered legacy framework components and will no longer be used
after the removal of IntelFramework[Module]Pkg.
Also, the unused (after the modules being removed) PCDs will be deleted in
package level DEC/UNI files.
Cc: Andrew Fish <afish@apple.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1617
This driver implements a common checker, verifier and reporter which is
independent of hardware based root-of-trust.
Usually the hardware based root-of-trust will not verify all BIOS but
part of it. For example, Boot Guard will only verify IBB segment. The IBB
needs to verify other part of BIOS, i.e. other FVs to transfer control to
from IBB. This driver plays the role in IBB to verify FVs not covered by
hardware root-of-trust to make sure integrity of the chain of trust.
To be hardware/platform independent, PPI
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid
is introduced for platform to pass digest information to this driver.
This PPI should include all information needed to verify required FVs in
required boot mode.
struct _EDKII_PEI_FIRMWARE_VOLUME_INFO_STORED_HASH_FV_PPI {
FV_HASH_INFO HashInfo;
UINTN FvNumber;
HASHED_FV_INFO FvInfo[1];
};
To avoid TOCTOU issue, all FVs to be verified will be copied to memory
before hash calculation. That also means this driver has to be run after
permanent memory has been discovered.
For a measured boot, this driver will install
gEdkiiPeiFirmwareVolumeInfoPrehashedFvPpiGuid
to report digest of each FV to TCG driver.
For a verified boot, this driver will verify the final hash value
(calculated from the concatenation of each FV's hash) for indicated
FVs against the hash got from platform/hardware.
If pass, it will build EFI_HOB_TYPE_FV (consumed by DXE core) and/or
install gEfiPeiFirmwareVolumeInfoPpiGuid (consumed by PEI core), and
then report status code PcdStatusCodeFvVerificationPass.
If fail, it just report status code PcdStatusCodeFvVerificationFail
and go to dead loop if status report returns.
The platform can register customized handler to process pass and fail
cases differently.
Currently, this driver only supports hash (sha256/384/512) verification
for the performance consideration.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1617
gEdkiiPeiFirmwareVolumeInfoStoredHashFvPpiGuid should be installed by
platform to pass FV hash information to the common FV verify/report
driver, in which the hash value will be calculated again based on the
information fed in and then verified.
The information passed in this PPI include:
- FVs location in flash and length
- Hash values for different boot mode
The hash value must be calculated in following way (if 3 FVs to calc):
FV1 -> Hash1
FV2 -> Hash2
FV3 -> Hash3
Hash1 + Hash2 + Hash3 -> HashAll
Only HashAll is stored in this PPI. The purposes for this algorithm
are two:
1. To report each FV's hash to TCG driver and verify HashAll at the
same time without the burden to calculate the hash twice;
2. To save hash value storage due to potential hardware limitation
Different boot mode may have its own hash value so that each mode can
decide which FV will be verified. For example, for the sake of performance,
S3 may choose to skip some FVs verification and normal boot will verify
all FVs it concerns.
So in this PPI, each FV information has flag to indicate which boot mode
it will be taken into hash calculation.
And if multiple hash values passed in this PPI, each has a flag to indicate
which boot mode it's used for. Note one hash value supports more than one
boot modes if they're just the same.
PcdStatusCodeFvVerificationPass and PcdStatusCodeFvVerificationFail are
introduced to report status back to platform, and platform can choose how
to act upon verification success and failure.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: "Hernandez Beltran, Jorge" <jorge.hernandez.beltran@intel.com>
Cc: Harry Han <harry.han@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Mostly, this is only necessary for devices that the CSM might have
native support for, such as VirtIO and NVMe; PciBusDxe will already
degrade devices to 32-bit if they have an OpROM.
However, there doesn't seem to be a generic way of requesting PciBusDxe
to downgrade specific devices.
There's IncompatiblePciDeviceSupportProtocol but that doesn't provide
the PCI class information or a handle to the device itself, so there's
no simple way to just match on all NVMe devices, for example.
Just leave gUefiOvmfPkgTokenSpaceGuid.PcdPciMmio64Size set to zero for
CSM builds, until/unless that can be fixed.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-5-dwmw2@infradead.org>
QemuVideoDxe installs its own legacy INT 10h handler for the benefit of
systems like Windows 2008r2 which attempt to use INT 10h even when booted
via EFI.
This interacts extremely badly with a CSM actually attempting to install
a real video BIOS.
The last thing done before invoking a legacy OpROM is to call INT 10h to
set a plain text mode. In the case where it's the video BIOS OpROM being
loaded, INT 10h will normally point to an iret stub in the CSM itself.
Unless QemuVideoDxe has changed INT10h to point to a location in the
0xC0000 segment that it didn't allocate properly, so the real OpROM has
been shadowed over them top of it, and the INT 10h vector now points to
some random place in the middle of the newly-shadowed OpROM.
Don't Do That Then. QemuVideoDxe doesn't do any acceleration and just
sets up a linear framebuffer, so we don't lose much by just
unconditionally using BiosVideoDxe instead when CSM is present.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-4-dwmw2@infradead.org>
Iterate over the available block devices in much the same way as
BdsLibEnumerateAllBootOption() does, but limiting to those devices
which are PCI-backed, which can be represented in the BbsTable.
One day we might need to extend the BbsTable to allow us to distinguish
between different NVMe namespaces on a device.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190626113742.819933-3-dwmw2@infradead.org>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
REF: https://github.com/tianocore/tianocore.github.io/wiki/
UEFI-Capsule-on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1840
1. Introduce an internal header file to put definitions in it.
2. Add missing '\n' in usage.
3. Fix the dead loop of CapsuleApp -L.
4. Fix the bug that CapsuleApp -OD cannot perform capsules in sub-
folder.
5. Optimize the handling for option -NR and -OD to support both
'CapsuleApp <Capsule> -OD -NR' and 'CapsuleApp <Capsule> -NR -OD'.
6. Check if Capsule-On-Disk is supported by "OsIndicationsSupported"
variable firstly before processing capsules. If not supported, prompt
an error message and quit the process.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1879
This commit will add the definitions of Nvm Express PassThru PPI.
This PPI will provide services that allow NVM commands to be sent
to NVM Express devices during PEI phase.
More specifically, the PPI will provide services to:
* Sends an NVM Express Command Packet to an NVM Express controller
or namespace (by service 'PassThru');
* Get the list of the attached namespaces on a controller
(by services 'GetNextNameSpace');
* Get the identification information (DevicePath) of the underlying
NVM Express host controller (by service 'GetDevicePath').
Signed-off-by: Maggie Chu <maggie.chu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Re-run process_files.py to generate OpensslLib[Crypto].inf.
CryptoPkg/Library/Include/openssl/opensslconf.h is coped from OpenSSL,
So keep the CR/LF style like OpenSSL source file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
CoDCheckCapsuleOnDiskFlag() is to check if CapsuleOnDisk flag in
"OsIndications" Variable is enabled. It is used to indicate whether
capsule on disk is provisioned in normal boot path.
CoDClearCapsuleOnDiskFlag() is to to clear CapsuleOnDisk flags,
including "OsIndications" and "BootNext" variable.
CoDRelocateCapsule() is to relocate the capsules from EFI system
partition. Depends on PcdCapsuleInRamSupport, there are two solutions
to relocate the capsule on disk images:
When Capsule In Ram is supported, the Capsule On Disk images are
relocated into memory, and call UpdateCapsule() service to deliver
the capsules.
When Capsule In Ram is not supported, the Capsule On Disk images are
relocated into a temp file which will be stored in root directory on
a platform specific storage device. CapsuleOnDiskLoadPei PEIM will
retrieve the capsules from the relocation temp file and report
capsule hobs for them.
CoDRemoveTempFile() is to remove the relocation temp file in the next
boot after capsules are processed.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1840
1. Add missing '\n' in usage.
2. Fix the dead loop of CapsuleApp -L.
3. Fix the bug that CapsuleApp -OD cannot perform capsules in sub-
folder.
4. Optimize the handling for option -NR and -OD to support both
'CapsuleApp <Capsule> -OD -NR' and 'CapsuleApp <Capsule> -NR -OD'.
5. Check if Capsule-On-Disk is supported by "OsIndicationsSupported"
variable firstly before processing capsules. If not supported, prompt
an error message and quit the process.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
https://github.com/tianocore/tianocore.github.io/wiki/UEFI-Capsule-
on-Disk-Introducation
This patch will add Capsule On Disk related definition, including
GUID, PPI and PCDs:
The Capsule On Disk Name GUID indicates the capsule is to store
Capsule On Disk file names.
The Pei Capsule On Disk PPI provides service to retrieve capsules
from Capsule On Disk temp relocation file on mass storage devices
and create capsule hob for these capsules.
Pei Boot In CapsuleOnDisk Mode Ppi indicates current boot mode is
capsule on disk mode.
PcdCapsuleOnDiskSupport is used to enable/disable Capsule On Disk.
PcdCapsuleInRamSupport is used to enable/disable Capsule In Ram.
PcdCoDRelocationFileName specifies the Capsule On Disk temp
relocation file name.
PcdCodRelocationDevPath specifies platform specific device to store
Capsule On Disk temp relocation file.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Chao B Zhang <chao.b.zhang@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
The ACPI 6.3 specification introduces a 'SPE overflow
Interrupt' field as part of the GICC structure.
Update the MADT parser to decode this field and validate
the interrupt ID used.
References:
- ACPI 6.3 Specification - January 2019
- Arm Generic Interrupt Controller Architecture Specification,
GIC architecture version 3 and version 4, issue E
- Arm Server Base System Architecture 5.0
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The comments describes the device as being 32-bit:
"the maximum time span is just over 136 years"
then uses a UINTN to hold the value.
Change to UINT32 so we don't get different behaviour for different architectures.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1894
Basetool need a CopyFileOnChange() function to avoid cache
file writing race in multi-thread build. Some platforms
build fail with file IO writing race issue when the
build cache is enabled to store cache files in multi-threads.
This is because common same library cache files (e.g. some
libs in MdePkg) can be stored by many different driver modules'
build threads at same time. Current build cache need a function
to check whether the same cache file already exist, and only
copy source file if it is different from the destination file.
This patch introduces an atomic copy function to avoid duplicated
cache files copy.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Christian Rodriguez <christian.rodriguez@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1895
Build cache cannot store cache for the same library modules
in different arch together. E.g. Both the below IA32 and X64
arch BaseLib caches should exist after build Ovmf3264, but now
only the one in X64 arch exist.
The reason is the current Basetool use a set() to same all
library AutoGen objects, but the different arch lib AutoGen
objects have same __hash_ value which comes from the lib
MetaFile(The path of module file):
def __hash__(self):
return hash(self.MetaFile)
So the different arch lib AutoGen objects are duplicated one
to the set() and only one can exist. This is why the Basetool
can only store one arch cache for library.
This patch adds the arch string into the PlatformAutoGen and
ModuleAutoGen __hash_ definitions and ensure the different
platform and module AutoGen objects have different __hash_ values.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Christian Rodriguez <christian.rodriguez@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1867
Current build cache cannot store the cache for library package.
build -p MdePkg\MdePkg.dsc -a IA32 -b DEBUG -t VS2015x86 --hash
--binary-destination=BinCache
After build, the expected result is the BinCache folder is generated
and the MdePkg build cache files (e.g. .hash and .lib) are stored in
the BinCache folder. But the BinCache folder is not generated at all.
This patch is going to fix that issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Zhiju.Fan <zhijux.fan@intel.com>
Signed-off-by: Steven Shi <steven.shi@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
SERIAL_DXE_FILE_GUID is now defined in MdeModulePkg as
EDKII_SERIAL_PORT_LIB_VENDOR_GUID, simply use it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20190606131459.1464-3-anthony.perard@citrix.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[lersek@redhat.com: drop "from MdeModulePkg" from the subject]
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
The DX register is supposed to contain the required alignment for the
allocation. It was zero, and SeaBIOS doesn't (well, didn't) cope well
with that. Set it appropriately.
Also set BX to indicate the regions it's OK to allocate in too. That
wasn't being initialised and was just using whatever the previous user
of the structure had left there.
Finally, actually return an error if the allocation fails. Instead of
going all the way through into the CSM and just letting it have a bogus
pointer to the E820 data.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of LegacyBiosDxe in IntelFrameworkModulePkg with the one
copied in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will update the driver's INF file to:
A) Assign a new file GUID;
B) Consume the PCDs duplicated in OvmfPkg DEC file;
C) Remove the IntelFramework[Module]Pkg DEC file dependency.
Please note that a subsequent commit (final patch of the series) will:
Replace the use of VideoDxe in IntelFrameworkModulePkg with the one copied
in OvmfPkg within DSC/FDF files.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1811
This commit will add the PCD definitions consumed by the duplicated
drivers:
* VideoDxe
* LegacyBiosDxe
into the OvmfPkg DEC file.
Please note that, instead of adding these PCDs under section:
[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx, PcdsPatchableInModule]
as in IntelFrameworkModulePkg.dec file, they are added in section:
[PcdsFixedAtBuild]
in OvmfPkg.dec instead.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: David Woodhouse <dwmw2@infradead.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1412
Original logic:
Connect the graphics device -> connect it as graphics consoles
and initialize its parameters(Mode = -1, invalid) -> connect it
as console spliter and add the device to the list(use SetMode to
set mode to the user defined mode or the best mode the devices
supported if the mode is invalid. *clear the screen at this phase*)
Changed logic:
Connect the graphics device -> connect it as graphics consoles
and initialize its parameters(initialize the mode to the user
defined mode or the best mode. *directly set the mode value without
using SetMode, that would not clear the screen) -> connect it as
console spliter and add the device to the list(use SetMode to set
mode to the user defined mode or the best mode the devices supported
if the mode is invalid. *now the mode is already set, so it would
not clear the screen*).
Also remove the section of SetMode for debug version.
Impact: as the text mode may not be an invalid value, the SetMode
may have no chance to be called during reconnect the graphics device.
That means the screen may not be cleaned after finishing reconnect
operation. There is one common condition: shell command "recoonect -r".
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Bret Barkelew <Bret.Barkelew@microsoft.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Before adding the git environment initialization script, add the
following files that will be pointed to after running said script:
- BaseTools/Conf/diff.order
- BaseTools/Conf/gitattributes
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When assigning a physical PCIe device to a QEMU/KVM guest, PciBusDxe may
find that the extended config space is not (fully) implemented. In
LocatePciExpressCapabilityRegBlock(), "CapabilityEntry" may be read as
0xFFFF_FFFF at a given config space offset, after which the loop gets
stuck spinning on offset 0xFFC (the read at offset 0xFFC returns
0xFFFF_FFFF most likely as well).
Another scenario (not related to virtualization) for triggering the above
is when a Conventional PCI bus -- exposed by a PCIe-to-PCI bridge in the
topology -- intervenes between a PCI Express Root Port and a PCI Express
Endpoint. The Conventional PCI bus limits the accessible config space of
the PCI Express Endpoint, even though the endpoint advertizes the PCI
Express capability. Here's a diagram, courtesy of Alex Williamson:
[PCIe Root Port]--[PCIe-to-PCI]--[PCI-to-PCIe]--[PCIe EP]
->| |<- Conventional PCI bus
Catch reads of 0xFFFF_FFFF in LocatePciExpressCapabilityRegBlock(), and
break out of the scan with a warning message. The function will return
EFI_NOT_FOUND.
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Changed the line endings to DOS line endings for
DynamicTablesPkg/DynamicTablesPkg.dsc
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
The ACPI 6.3 specification adds support for describing
ARMv8.1 EL2 virtual timers. Update GTDT Generator
to extend this support.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The PPTT generator uses the configuration manager protocol to
obtain information about platform's processor topology and caches.
This data is then used to generate the PPTT table.
The table generator supports ACPI 6.3, PPTT table revision 2.
The dynamic PPTT generator also carries out extensive input
validation which includes cycle detection and MADT-PPTT
cross-validation. A number of architectural compliance checks
are also performed.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1842
According to the discussion at:
https://edk2.groups.io/g/devel/topic/30918343#38093
For OVMF, we keep both ISA stacks:
* The legacy one in PcAtChipsetPkg/IntelFrameworkModulePkg
* The Sio bus based OVMF-specified one introduced by commit a5cc178aeb
for a period of time (includes 1 stable tag: edk2-stable201905). And we
also keep the Sio bus based OVMF-specified stack as the default one (via a
build option 'USE_LEGACY_ISA_STACK') to validate its stability.
This commit will propose to drop the legacy ISA stack from OVMF and remove
the usage of the build flag 'USE_LEGACY_ISA_STACK' at the same time. This
is considered as a preparation for the removal of
PcAtChipsetPkg/IsaAcpiDxe & IntelFrameworkModulePkg.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The Dynamic Tables Framework now supports generating Multiple APIC
Description Table (MADT) revision 5 for ARM platforms while maintaining
backward-compatibility with ACPI 6.2.
The relevant change is the enablement of the Statistical Profiling
Extension (SPE).
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate frame numbers when populating the GT Block Timer
Frames inside the GTDT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Check for duplicate ACPI Processor UIDs when populating the GIC CPU
(GICC) Interface structures inside the MADT table generator.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added generic function for detecting duplicate values in an array.
Also defined a function prototype to test if two objects are equal.
The prototype is used as an argument to the 'FindDuplicateValues'
function.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Added code to check if the Generic Timer Block Structure's frame number
provided by the platform repository is within the allowed range (0-7).
References:
- ACPI 6.2 Errata A, Table 5-122, September 2017
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
The ACPI 6.3 specification introduces support to describe
the ARMv8.1 virtual EL2 timers. This patch updates the GTDT parser
of acpiview to decode the EL2 virtual timer fields.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <Alexei.Fedorov@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1765
If RAW FFS File Rule has no section for its data.For RAW FFS File,
directly call GenFfs tool to generate FFS file.
Ffs Rule:
[Rule.Common.USER_DEFINED.MicroCode]
FILE RAW = $(NAMED_GUID) {
$(INF_OUTPUT)/$(MODULE_NAME).bin
}
[Rule.Common.USER_DEFINED.LOGO]
FILE RAW = $(NAMED_GUID) {
|.bmp
}
As shown in the rule above,if SectionType and FileType not defined,
FFS files are generated directly, and no other type of file is
generated.
The patch is to make the BaseTools support these two rules
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The patch fixes the bug that the memory under 1MB is modified by
firmware in S3 boot.
Root cause is a racing condition in MpInitLib:
1. BSP: WakeUpByInitSipiSipi is set by NotifyOnS3SmmInitDonePpi()
2. BSP: WakeUpAP() wakes all APs to run certain procedure.
2.1. AllocateResetVector() uses <1MB memory for wake up vector.
2.1. FillExchangeInfoData() resets NumApsExecuting to 0.
2.2. WaitApWakeup() waits AP to clear WAKEUP_AP_SIGNAL.
3. AP: ApWakeupFunction() clears WAKEUP_AP_SIGNAL to inform BSP.
5. BSP: FreeResetVector() restores the <1MB memory
4. AP: ApWakeupFunction() calls the certain procedure.
4.1. NumApsExecuting is decreased.
#4.1 happens after the 1MB memory is restored so the result is
memory below 1MB is changed by #4.1
It happens only when the AP executes procedure a bit longer.
AP returns back to ApWakeupFunction() from procedure after
BSP restores the <1MB memory.
Since NumApsExecuting is only used when InitFlag == ApInitConfig
for counting the processor count.
The patch moves the NumApsExecuting decrease to the path when
InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Nandagopal Sathyanarayanan <nandagopal.sathyanarayanan@intel.com>
NumApsExecuting is only used when InitFlag == ApInitConfig for
counting the processor count.
The patch changes Ia32 version of waking up vector assembly code
to align to x64 version of waking up vector assembly code.
After the change both versions of waking up vector increase
NumApsExecuting when InitFlag == ApInitConfig.
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1810
This patch covers two problems.
1. Current code gets CPUID_THERMAL_POWER_MANAGEMENT in
ClockModulationInitialize() and uses its ECMD bit for all processors.
But ClockModulationInitialize() is only executed by BSP, that means
the bit is just for BSP.
It may have no functionality issue as all processors may have same
bit value in a great possibility. But for good practice, the code
should get CPUID_THERMAL_POWER_MANAGEMENT in ClockModulationSupport
(executed by all processors), and then use them in
ClockModulationInitialize() for all processors.
We can see that Aesni.c (and others) have used this good practice.
2. Current code uses 3 CPU_REGISTER_TABLE_WRITE_FIELD for
MSR_IA32_CLOCK_MODULATION in ClockModulationInitialize(), they can
be reduced to 1 CPU_REGISTER_TABLE_WRITE64 by getting
MSR_IA32_CLOCK_MODULATION for all processors in
ClockModulationSupport() and then update fields for register table
write in ClockModulationInitialize().
We may argue that there may be more times of MSR_IA32_CLOCK_MODULATION
getting. But actually the times of MSR_IA32_CLOCK_MODULATION getting
could be also reduced.
The reason is in ProgramProcessorRegister() of CpuFeaturesInitialize.c,
AsmMsrBitFieldWrite64 (AsmReadMsr64 + AsmWriteMsr64) will be used for
CPU_REGISTER_TABLE_WRITE_FIELD, and AsmWriteMsr64 will be used for
CPU_REGISTER_TABLE_WRITE64.
The times of MSR accessing could be reduced with this patch.
Without the patch:
3 CPU_REGISTER_TABLE_WRITE_FIELD (in ClockModulationInitialize)
==> 3 AsmMsrBitFieldWrite64
==> 3 AsmReadMsr64 + 3 AsmWriteMsr64
With the patch:
1 AsmReadMsr64 (in ClockModulationSupport) +
1 CPU_REGISTER_TABLE_WRITE64 (in ClockModulationInitialize)
==> 1 AsmWriteMsr64
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1829
There will be ASSERT if LMCE is supported as below.
DXE_ASSERT!: [CpuFeaturesDxe]
XXX\UefiCpuPkg\Library\CpuCommonFeaturesLib\MachineCheck.c (342):
ConfigData != ((void *) 0)
The code should get Config Data and FeatureControlGetConfigData
could be used.
This issue is there since the code was added at the commit below.
Revision: 3d6275c113
Date: 2017/8/4 8:46:41
UefiCpuPkg CpuCommonFeaturesLib: Enable LMCE feature.
The commits below are also related to move the code.
Revision: 0233871442
Date: 2017/9/1 10:12:38
UefiCpuPkg/Lmce.c Remove useless file.
Revision: 306a5bcc6b
Date: 2017/8/17 11:40:38
UefiCpuPkg/CpuCommonFeaturesLib: Merge machine check code to same file.
So, the code may not be tested at all on a platform
that supports LMCE.
BTW: A typo in LmceInitialize is also fixed.
The typo is introduced by the commit below.
Revision: d28daaddb3
Date: 2018/10/17 9:24:05
UefiCpuPkg/CpuCommonFeaturesLib: Register MSR base on scope Info.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1808
In current code, the values of TopaEntryPtr->Uint64 for TopaTable
and the values of OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64
to register table write for RTIT_OUTPUT_BASE and RTIT_OUTPUT_MASK_PTRS
are not been initialized in whole. For example, the reserved bits in
OutputBaseReg.Uint64 are random that will cause GP fault like below
when SetProcessorRegister (in CpuFeaturesInitialize.c) sets register
based on register table.
!!!! X64 Exception Type - 0D(#GP - General Protection)
CPU Apic ID - 00000000 !!!!
ExceptionData - 0000000000000000
RIP -0000000064D69576, CS -0000000000000038, RFLAGS -0000000000010246
RAX -000000006B9F1001, RCX -0000000000000560, RDX -0000000000000000
RBX -0000000064EECA18, RSP -000000006CB82BA0, RBP -0000000000000008
RSI -0000000080000000, RDI -0000000000000011
R8 -000000006B9493D0, R9 -0000000000000010, R10 -00000000000000FF
R11 -000000006CB82A50, R12 -0000000064D70F50, R13 -0000000066547050
R14 -0000000064E3E198, R15 -0000000000000000
DS -0000000000000030, ES -0000000000000030, FS -0000000000000030
GS -0000000000000030, SS -0000000000000030
CR0 -0000000080010013, CR2 -0000000000000000, CR3 -000000006C601000
CR4 -0000000000000628, CR8 -0000000000000000
DR0 -0000000000000000, DR1 -0000000000000000, DR2 -0000000000000000
DR3 -0000000000000000, DR6 -00000000FFFF0FF0, DR7 -0000000000000400
GDTR -000000006B8CCF18 0000000000000047, LDTR -0000000000000000
IDTR -000000006687E018 0000000000000FFF, TR -0000000000000000
FXSAVE_STATE -000000006CB82800
And current code gets MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceInitialize() and uses their
values for all processors. But ProcTraceInitialize() is only executed
by BSP, that means the values just for BSP. For good practice, the code
should get MSR_IA32_RTIT_CTL, MSR_IA32_RTIT_OUTPUT_BASE and
MSR_IA32_RTIT_OUTPUT_MASK_PTRS in ProcTraceSupport (executed by all
processors), and then use them in ProcTraceInitialize() for all
processors. This can also resolve the issue that the values of
OutputBaseReg.Uint64 and OutputMaskPtrsReg.Uint64 are not been
initialized in whole.
For TopaEntryPtr->Uint64, this patch updates code to initialize it
in whole explicitly by TopaEntryPtr->Uint64 = 0 before updating its
fields.
At the same time, this patch also eliminates the ProcTraceSupported
field in PROC_TRACE_PROCESSOR_DATA and the TopaMemArrayCount field in
PROC_TRACE_DATA.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Cc: Kevin Li <kevin.y.li@intel.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The status code reporting functionality in PrePiLib is never invoked
so let's just remove it.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Query the supported attributes firstly, then bitwise AND (&) both VGA_IO
and VGA_IO_16. Since the supported attributes should only have one of
VGA_IO or VGA_IO_16 set, the result of bitwise AND (&) is either VGA_IO
or IO_16. Then the result can be passed to PciIo->Attributes() to set the
attributes.
Device driver should consider both since the mReserveVgaAliases in
PciBusDxe driver is default FALSE(implies that device driver can only set
VGA_IO_16 to PCI_ROOT_BRIDGE), and Platform code may not return
EFI_RESERVE_VGA_IO_ALIAS in GetPlatformPolicy of PciPlatformProtocol to
make mReserveVgaAliases become TRUE(implies that device driver can only
set VGA_IO to PCI_ROOT_BRIDGE), Currently OvmfPkg doesn't have problem
due to it has hard code value for PCI_ROOT_BRIDGE's attributes field, so
an IO access by PciIoProtocol will be successed due to
RootBridgeIoCheckParameter of PciRootBridgeIo.c will always get pass
result for legacy IO access.
Usually the attributes field of PCI_ROOT_BRIDGE should be 0, in that case
it will have issue since the VGA_IO may not be able to be enabled, then
IO access by PciIoProtocol will be failed, hence the QemuVideoDxe driver
will not work fine.
Signed-off-by: Marc Chen <marc.w.chen@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Julien Grall <julien.grall@arm.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Stefan Berger <stefanb@linux.ibm.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1880
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190606074237.81492-1-marc.w.chen@intel.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
CryptoPkg\Library\Include\CrtLibSupport.h maps strxxxx interfaces to
edk2 PrintLib interfaces but related module inf file don't claim the
use of it. This will cause unresolved symbol issue with VS2017 build
which has enabled strict symbol check. This patch resolves the problem
by adding PrintLib to inf files.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
When use clang-3.8 to build the NetworkPkg, compiler optimization
may use memcpy for memory copy. For example:
CryptoPkg/Library/OpensslLib/openssl/ssl/ssl_rsa.c:918: undefined
reference to `memcpy'`
Compiler optimization is sophisticated, but we can work around it
use __attribute__((__used__)) to informs the compiler that symbol
should be retained in the object file, even if it may be
unreferenced.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the list of additional licenses in Readme.md. For additional
licenses from a git submodule, provide a link to the license file
in the remote git repository. This makes the links in Readme.md
when viewed from the edk2 repository GitHub landing page
https://github.com/tianocore/edk2/ functional from a web browser.
* Remove references EdkCompatibilityPkg
* Update link to OpenSSL to license file in the git submodule link
to https://github.com/openssl/openssl
* Add link to license file in the git submodule like to
https://github.com/ucb-bar/berkeley-softfloat-3 for
ArmSoftFloatLib
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1878
This issue is specific to VS2017 which tries to resolve symbol referenced
by a symbol not really referenced eventually.
ossl_init_load_crypto_strings
-> err_load_crypto_strings_int (not really referenced)
-> ERR_load_OSSL_STORE_strings
Because OPENSSL_NO_ERR and OPENSSL_NO_AUTOERRINIT are not defined by
default, err_load_crypto_strings_int() will not be actually referenced
by ossl_init_load_crypto_strings().
Since err_load_crypto_strings_int() is not actually referenced at all,
the fix can be done simply by removing crypto/err/err_all.c from build.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Xiaoyu Lu <xiaoyux.lu@intel.com>
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with XCODE, blow error may result
* usr/lib/clang/9.0.0/include/stdatomic.h:105:17:
error: unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Jian Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
(This is a replacement for commit 39b9a5ffe6 ("OvmfPkg/PlatformPei: fix
MTRR for low-RAM sizes that have many bits clear", 2019-05-16).)
Reintroduce the same logic as seen in commit 39b9a5ffe6 for the pc
(i440fx) board type.
For q35, the same approach doesn't work any longer, given that (a) we'd
like to keep the PCIEXBAR in the platform DSC a fixed-at-build PCD, and
(b) QEMU expects the PCIEXBAR to reside at a lower address than the 32-bit
PCI MMIO aperture.
Therefore, introduce a helper function for determining the 32-bit
"uncacheable" (MMIO) area base address:
- On q35, this function behaves statically. Furthermore, the MTRR setup
exploits that the range [0xB000_0000, 0xFFFF_FFFF] can be marked UC with
just two variable MTRRs (one at 0xB000_0000 (size 256MB), another at
0xC000_0000 (size 1GB)).
- On pc (i440fx), the function behaves dynamically, implementing the same
logic as commit 39b9a5ffe6 did. The PciBase value is adjusted to the
value calculated, similarly to commit 39b9a5ffe6. A further
simplification is that we show that the UC32 area size truncation to a
whole power of two automatically guarantees a >=2GB base address.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
(This is a replacement for commit 75136b2954, "OvmfPkg/PlatformPei:
reorder the 32-bit PCI window vs. the PCIEXBAR on q35", 2019-05-16).
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, place the PCIEXBAR at 2816MB (0xB000_0000), and
start the 32-bit PCI window at 3 GB (0xC000_0000). This shrinks the 32-bit
PCI window to
0xFC00_0000 - 0xC000_0000 = 0x3C00_0000 = 960 MB.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 60e95bf509.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This reverts commit 9a2e8d7c65.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 75136b2954.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This reverts commit 39b9a5ffe6.
The original fix for <https://bugzilla.tianocore.org/show_bug.cgi?id=1814>
triggered a bug / incorrect assumption in QEMU.
QEMU assumes that the PCIEXBAR is below the 32-bit PCI window, not above
it. When the firmware doesn't satisfy this assumption, QEMU generates an
\_SB.PCI0._CRS object in the ACPI DSDT that does not reflect the
firmware's 32-bit MMIO BAR assignments. This causes OSes to re-assign
32-bit MMIO BARs.
Working around the problem in the firmware looks less problematic than
fixing QEMU. Revert the original changes first, before implementing an
alternative fix.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1859
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Commit c51f8bae7c ("CryptoPkg: Fix possible build problem with
Clang") added -std=c99 to the CLANG38 compiler command line of
packages that incorporate parts of OpenSSL, to ensure that the new
C atomics code used by OpenSSL for refcounting (which we don't care
about) does not pull in system C library headers, which we cannot
rely on when (cross)building EDK2 code.
Unsurprisingly, CLANG35 (which is only defined for ARM and AARCH64)
suffers from the exact same issue, so let's add the same flags
there as well.
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* Update OpenSSL submodule to OpenSSL_1_1_1b
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687)
* Run process_files.pl script to regenerate OpensslLib[Crypto].inf
and opensslconf.h
* Remove -DNO_SYSLOG from OPENSSL_FLAGS in OpensslLib[Crypto].inf,
due to upstream OpenSSL commit cff55b90e95e("Cleaning UEFI
Build with additional OPENSSL_SYS_UEFI flags", 2017-03-29),
which was first released as part of OpenSSL_1_1_1.
* Starting with OpenSSL commit 8a8d9e1905(first release in
OpenSSL_1_1_1), the OpenSSL_version() function can no longer
return a pointer to the string literal "compiler: information
not available", in the case CFLAGS macro is not defined.
Instead, the function now has a hard dependency on the global
variable 'compiler_flags'. This variable is normally placed
by "util/mkbuildinf.pl" into "buildinf.h". In edk2 we don't
run that script whenever we build OpenSSL, therefore we
must provide our own dummy 'compiler_flags'.
* BUFSIZ is used by crypto/evp/evp_key.c(OpenSSL_1_1_1b)
And it is declared in stdio.h. So add it to CrtLibSupport.h.
Here's a discussion about this.
Ref: https://github.com/openssl/openssl/issues/8904
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
* From OpenSSL_1_1_0i(97c0959f27b294fe1eb10b547145ebef2524b896) to
OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687), OpenSSL
updated DRBG / RAND to request nonce and additional low entropy
randomness from system(line 229 openssl/CHANGES).
Since OpenSSL_1_1_1b doesn't fully implement rand pool functions
for UEFI. We must provide a method to implenet these method.
TSC is used as first entropy source if it's availabe otherwise
fallback to TimerLib. But we are not sure the amount of randomness
they provide. If you really care about the security, one choice is
overrided it with hardware generator.
Add rand_pool.c to implement these functions required by OpenSSL
rand_pool_acquire_entropy
rand_pool_add_nonce_data
rand_pool_add_additional_data
rand_pool_init
rand_pool_cleanup
rand_pool_keep_random_devices_open
And add rand_pool_noise.* for getting entropy noise from different
architecture.
* We don't need ossl_store functions. We exclude relative files
through process_files.pl. And ossl_store_cleanup_int was first
added in crypto/init.c OpenSSL_1_1_1(71a5516d).
So add a new file(ossl_store.c) to implement ossl_store_cleanup_int
function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When building CryptoPkg with Clang, blow error may result
* /usr/lib/llvm-3.8/lib/clang/3.8.0/include/stdatomic.h:105:17: error:
unknown type name 'wchar_t'
Since the C native atomics are C11 feature we can explicitly
use C99 to work around it.
add -std=c99 to avoid it
* openssl/crypto/conf/conf_sap.c:71:12: error: variable 'ret' is
uninitialized
when used here [-Werror,-Wuninitialized]
Suppress warnings in OpenSSL so we don't break the build with -Werror.
add -Wno-error=uninitialized to disalbe this warning
Cc: Ting Ye <ting.ye@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
Disable warning for building OpenSSL_1_1_1b
add /wd4132 /wd4700 /wd4310 for Visual Studio in OpensslLib[Crypto].inf
add -Wno-error=unused-but-set-variable for GCC in OpensslLib[Crypto].inf
Although this option is set in some build environments by default.
But this is only for OpenSSL compilation, no matter how the
default options change.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
When running process_files.py to configure OpenSSL, we can exclude
some unnecessary files. This can reduce porting time, compiling
time and library size.
Upstream OpenSSL commit 71a5516dcc8a which was as part of
OpenSSL_1_1_1b, Add the STORE module(crypto/store/*).
But UEFI don't use them. So exclude these files.
Functions in crypto/rand/randfile.c OpenSSL and edk2 don't
call them. And it requires more crt runtime support.
So exclude it.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1089
OpenSSL configure mechanism use --with-rand-seed=xxx option to configure
random number generation.
OpenSSL_1_1_0j(74f2d9c1ec5f5510e1d3da5a9f03c28df0977762)
we use default --with-rand-seed=os option to for building it.
But OpenSSL_1_1_1b(50eaac9f3337667259de725451f201e784599687)
only support seeding NONE for UEFI(rand_unix.c line 93).
This OpenSSL change was introduced in commit
8389ec4b4950 ("Add --with-rand-seed", 2017-07-22).
So add --with-rand-seed=none to process_files.pl.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Xiaoyu Lu <xiaoyux.lu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
The upstream SoftFloat code that was recently incorporated into
ArmSoftFloatLib uses some parameterization to tweak the inlining
and optimization behavior for different compilers.
The custom platform.h file that sets these parameters is based on
the upstream version for Linux/ARM, but was updated to include the
'always_inline' GCC attribute into the INLINE macro, to ensure that
all definitions that are marked as inline are not only inlined into
their callers, but also to ensure that no version of the function is
ever emitted into the object file.
This works fine on recent GCC and Clang, but the latter part turns
out to break on GCC 4.x, resulting duplicate definition linker errors.
Fortunately, the synticatically more appriopriate 'static inline'
works fine on both the recent and the older compilers, so let's switch
to that instead.
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Clang 7 complains about the vmsr instruction in ArmV7Support.S,
which is only available on cores that implement some flavour of
VFP. So set the .fpu to NEON like we do in some other places.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Update the INF description and the top level .c files in order to
switch to the new version of the SoftFloat library imported as a
Git submodule in the previous patch.
Note that we no longer use the code that travelled a long way from
the 2002 version of the softfloat library via NetBsd and the StdLib
package. Instead, we are using the upstream version unmodified, with
the glue .c file adopted from the OP-TEE project. This approach is
much cleaner and much more maintainable.
Note that support for the RVCT toolchains is being dropped at the same
time. RVCT is mostly untested, and planned to be removed, and so it
makes little sense to go to the trouble of upgrading this library for
RVCT as well.
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1845
Acked-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1862
Current implementation of function AhciModeInitialization() has an
incorrect assumption that the value in the CAP (offset 00h) register will
always be greater than the highest bit set for the value in the PI (offset
0Ch) register.
This will lead to an issue that hard disk devices may not be found in the
non-S3 boot path for some AHCI controller capabilities.
More specifically, variable 'PortInitializeBitMap' will have the value
from 'Private->PortBitMap', which will be 0xFFFFFFFF in non-S3 boot path.
When the CAP register is of value 0x1 and PI register with value 0x4
(meaning port 2 is available), the current logic will only enumerate port
0. And the device attached behind port 2 will not be enumerated.
To address this issue, variable 'PortInitializeBitMap' will now take the
bitwise and result between 'Private->PortBitMap' and the value read from
the PI register.
Please note that there will be no function impact for S3 path, since in
this case, the bits being set in 'Private->PortBitMap' will be a subset
of the bits being set in the PI register. Their bitwise and operation will
still be the value of 'Private->PortBitMap'.
Cc: Maggie Chu <maggie.chu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Remove CorebootModulePkg and CorebootPayloadPkg, and add
UefiPayloadPkg to reflect recently change in UEFI payload.
wiki link for UefiPayloadPkg would be available soon.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
The devel mailing list has moved from 01.org to groups.io - update
the mailing list information to reflect this.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1806
Current Binary Cache use the PlatformInfo.Name to distinguish
the different platform cache paths in the database folder.
But the different platforms might use the same PLATFORM_NAME
in the DSC files. Different platform caches might overlay each
other inside Binary Cache database if they use same platform name
Use the PlatformInfo.Platform.OutputDirectory instead of the
PlatformInfo.Name can solve the problem.
This patch is going to fix that issue.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Steven Shi <steven.shi@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Network related modules have been included in NetworkPkg.dsc.
They can be removed from MdeModulePkg.dsc.
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1788
In V3: Must generate hashes before attempting to copy from cache for
hash verifcation
In V2: Build failure caused by passing incorrect boolean parameter to
SaveFileOnChange(). Fixed for patch instances.
Library hashing is now supported by the --hash feature. The --hash
feature implementation assumed that the hashing could be done in
place once per module, but that isn't true for libraries due to the
fact that they are built as dependencies. So on a clean build, we now
generate the .hash after the library dependencies are complete.
Added early escape as optimization, if hash already exists in memory.
Signed-off-by: Christian Rodriguez <christian.rodriguez@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1648
When a module in a DSC file uses a FILE_GUID override in the
module scoped <Defines> section, a copy of the modified INF file
is placed in the Conf/.cache directory. The check for private
includes uses the INF path to determine if the module is allowed
to use the private includes. Since the INF path in this case is
not in any package, this check always fails, and no private
include paths are possible.
The fix is to keep both the OriginalPath and the new Path in
the PathClass object, and always use the OriginalPath to see if
the module INF is in the package with private includes.
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
The ID Type Structure (Type 2) inside the Processor Properties
Topology Table (PPTT) has a VENDOR_ID field which identifies the
node vendor. The approved values are listed in the ACPI ID Registry
and they are meant to be interpreted as arrays of ASCII characters.
This change to the acpiview parser for PPTT aims to reflect that.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Removed conditional pre-compiling for ARM CPUs because function
ValidateCacheAttributes(..) is based on ACPI PPTT specification.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reported-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
The ACPI 6.2 specification mandates that the Generic Timer (GT) Block
Timer Structures must have a frame number in the range 0-7.
Update the GTDT parser to warn if this condition is violated.
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Zhichao Gao <zhichao.gao@intel.com>
Assume that we boot OVMF in a QEMU guest with 1025 MB of RAM. The
following assertion will fire:
> ASSERT_EFI_ERROR (Status = Out of Resources)
> ASSERT OvmfPkg/PlatformPei/MemDetect.c(696): !EFI_ERROR (Status)
That's because the range [1025 MB, 4 GB) that we try to mark as
uncacheable with MTRRs has size 3071 MB:
0x1_0000_0000
-0x0_4010_0000
--------------
0x0_BFF0_0000
The integer that stands for the uncacheable area size has 11 (eleven) bits
set to 1. As a result, covering this size requires 11 variable MTRRs (each
MTRR must cover a naturally aligned, power-of-two sized area). But, if we
need more variable MTRRs than the CPU can muster (such as 8), then
MtrrSetMemoryAttribute() fails, and we refuse to continue booting (which
is justified, in itself).
Unfortunately, this is not difficult to trigger, and the error message is
well-hidden from end-users, in the OVMF debug log. The following
mitigation is inspired by SeaBIOS:
Truncate the uncacheable area size to a power-of-two, while keeping the
end fixed at 4 GB. Such an interval can be covered by just one variable
MTRR.
This may leave such an MMIO gap, between the end of low-RAM and the start
of the uncacheable area, that is marked as WB (through the MTRR default).
Raise the base of the 32-bit PCI MMIO aperture accordingly -- the gap will
not be used for anything.
On Q35, the minimal 32-bit PCI MMIO aperture (triggered by RAM size 2815
MB) shrinks from
0xE000_0000 - 0xAFF0_0000 = 769 MB
to
0xE000_0000 - 0xC000_0000 = 512 MB
On i440fx, the minimal 32-bit PCI MMIO aperture (triggered by RAM size
3583 MB) shrinks from
0xFC00_0000 - 0xDFF0_0000 = 449 MB
to
0xFC00_0000 - 0xE000_0000 = 448 MB
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Commit 7b8fe63561 ("OvmfPkg: PlatformPei: enable PCIEXBAR (aka MMCONFIG
/ ECAM) on Q35", 2016-03-10) claimed that,
On Q35 machine types that QEMU intends to support in the long term, QEMU
never lets the RAM below 4 GB exceed 2 GB.
Alas, this statement came from a misunderstanding that occurred while we
worked out the interface contract. In fact QEMU does allow the 32-bit RAM
extend up to 0xB000_0000 (exclusive), in case the RAM size falls in the
range (0x8000_0000, 0xB000_0000) (i.e., the RAM size is greater than
2048MB and smaller than 2816MB).
In turn, such a RAM size (justifiedly) triggers
ASSERT (TopOfLowRam <= PciExBarBase);
in MemMapInitialization(), because we placed the 256MB PCIEXBAR at
0x8000_0000 (2GB) exactly, relying on the interface contract. (And, the
32-bit PCI window would follow the PCIEXBAR, covering the [0x9000_0000,
0xFC00_0000) range.)
In order to fix this, reorder the 32-bit PCI window against the PCIEXBAR,
as follows:
- start the 32-bit PCI window where it starts on i440fx as well, that is,
at 2GB or TopOfLowRam, whichever is higher;
- unlike on i440fx, where the 32-bit PCI window extends up to 0xFC00_0000,
stop it at 0xE000_0000 on q35,
- place the PCIEXBAR at 0xE000_0000.
(We cannot place the PCIEXBAR at 0xF000_0000 because the 256MB MMIO area
that starts there is not entirely free.)
Before this patch, the 32-bit PCI window used to only *end* at the same
spot (namely, 0xFC00_0000) between i440fx and q35; now it will only
*start* at the same spot (namely, 2GB or TopOfLowRam, whichever is higher)
between both boards.
On q35, the maximal window shrinks from
0xFC00_0000 - 0x9000_0000 = 0x6C00_0000 == 1728 MB
to
0xE000_0000 - 0x8000_0000 == 1536 MB.
We lose 192 MB of the aperture; however, the aperture is now aligned at
1GB, rather than 256 MB, and so it could fit a 1GB BAR even.
Regarding the minimal window (triggered by RAM size 2815MB), its size is
0xE000_0000 - 0xAFF0_0000 = 769 MB
which is not great, but probably better than a failed ASSERT.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1814
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1666941
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1701710
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
This patch updates the platform DSC/FDF files to use the include fragment
files provided by NetworkPkg.
The feature enabling flags in [Defines] section have been updated to use
the NetworkPkg's terms, and the value has been overridden with the original
default value on this platform.
v2:Add check for NETWORK_SNP_ENABLE and NETWORK_TLS_ENABLE.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Message-Id: <20190516081810.27840-4-shenglei.zhang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
[lersek@redhat.com: add TianoCore Bugzilla reference]
[lersek@redhat.com: undo spurious whitespace changes]
[lersek@redhat.com: clarify SNP and TLS rejection messages]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
For QA test and development, we may need to test Secure Boot with a
devel key instead of UEFI CA.
This commit adds an argument, "--no-default", to EnrollDefaultKeys.efi.
With the argument, the key from SMBIOS Type 11 will also be enrolled
into db. Besides, the keys in AuthData.c, i.e. Microsoft KEK CA,
Microsoft PCA, and Microsoft UEFI CA will be excluded, so the developer
can easily create a varstore template for a specific key.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Signed-off-by: Gary Lin <glin@suse.com>
Message-Id: <20190516030834.12203-1-glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1722
We plan to merge the BaseUefiTianoCustomDecompressLib
in MdeModulePkg into the BaseUefDecompressLib in MdePkg.
In order to reduce the duplicated codes and maintain
easily.
This patch adds a new fdf file in BaseUefDecompressLib
(BaseUefiTianoCustomDecompressLib.inf) to keep the same
functionality and usage model with the one in MdeModulePkg,
and then update consumer to use this new one one and
remove the one in MdeModulePkg finally.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1136
CVE: CVE-2018-12182
Customer met system hang-up during serial port loopback test in OS.
It is a corner case happened with one CPU core doing "out dx,al" and
another CPU core(s) doing "rep outs dx,byte ptr [rsi]".
Detailed code flow is as below.
1. Serial port loopback test in OS.
One CPU core: "out dx,al" -> Writing B2h, SMI will happen.
Another CPU core(s): "rep outs dx,byte ptr [rsi]".
2. SMI happens to enter SMM.
"out dx" (SMM_IO_TYPE_OUT_DX) is saved as I/O instruction type in
SMRAM save state for CPU doing "out dx,al".
"rep outs dx" (SMM_IO_TYPE_REP_OUTS) is saved as I/O instruction
type and rsi is save as I/O Memory Address in SMRAM save state for
CPU doing "rep outs dx, byte ptr [rsi]".
NOTE: I/O Memory Address (rsi) is a virtual address mapped by
OS/Virtual Machine.
3. Some SMM code calls EFI_SMM_CPU_PROTOCOL.ReadSaveState() with
EFI_SMM_SAVE_STATE_REGISTER_IO and parse data returned.
For example:
https://github.com/tianocore/edk2/blob/master/QuarkSocPkg/
QuarkNorthCluster/Smm/DxeSmm/QncSmmDispatcher/QNC/QNCSmmSw.c#L76
4. SmmReadSaveState() is executed to read save state for
EFI_SMM_SAVE_STATE_REGISTER_IO.
- The SmmReadSaveState() function in
"UefiCpuPkg/PiSmmCpuDxeSmm/PiSmmCpuDxeSmm.c" calls the
SmmCpuFeaturesReadSaveStateRegister() function, from the platform's
SmmCpuFeaturesLib instance.
- If that platform-specific function returns EFI_UNSUPPORTED, then
PiSmmCpuDxeSmm falls back to the common function
ReadSaveStateRegister(), defined in file
"UefiCpuPkg/PiSmmCpuDxeSmm/SmramSaveState.c".
Current ReadSaveStateRegister() in
UefiCpuPkg/PiSmmCpuDxeSmm/SmramSaveState.c is trying to copy data
from I/O Memory Address for EFI_SMM_SAVE_STATE_IO_TYPE_REP_PREFIX,
PF will happen as SMM page table does not know and cover this
OS/Virtual Machine virtual address.
Same case is for SmmCpuFeaturesReadSaveStateRegister() in platform-
specific SmmCpuFeaturesLib instance if it has similar implementation
to read save state for EFI_SMM_SAVE_STATE_REGISTER_IO with
EFI_SMM_SAVE_STATE_IO_TYPE_REP_PREFIX.
Same case is for "ins", 'outs' and 'rep ins'.
So to fix the problem, this patch updates the code to only support
IN/OUT, but not INS/OUTS/REP INS/REP OUTS for SmmReadSaveState().
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
None of the .c/.h in Arm/ are used any more => remove them.
Also merge the CC flags for MSFT ARM and ARM64, since these are the
only archs we support for this package.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
These files have \r\n line endings, but a few lines use \r\r\n which
is not a valid line ending. These lines were causing problems for git
and other tools.
Signed-off-by: Joe Richey <joerichey@google.com>
Review-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1752
This patch is to fix the code bug in StructurePcd overall
value assignment logic. If a Pcd Array size is fixed but the
size of actual value in Dsc or Dec is bigger than the Pcd
array size, the tool will report error about such setting and
stop build.
The patch is tested minplatform, Ovmf, structure pcd regression test
These tests are build pass. The patch also tested the following cases.
Our cases focused on PcdArraySize. 1.flexiable PcdArraySize.
2.Fixed PcdArraySize, Pcd overall value exceeds the size of PcdArray.
3.Fixed PcdArraySize, Pcd overall value Not exceeds the size of PcdArray.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update the QemuVideoDxe driver to not depend on the
OptionRomPkg to support moving OptionRomPkg to the
edk2-platforms repository.
The only dependency on the OptionRomPkg is the use of
PcdDriverSupportedEfiVersion to set the version value in the
EFI Driver Supported EFI Version Protocol.
Quoting the UEFI-2.8 spec, "This protocol is required for EFI
drivers that are *on* PCI and other plug in cards" (emphasis ours).
However, QemuVideoDxe is always part of the OVMF platform firmware,
and is never read by PciBusDxe from the PCI ROM BAR of QEMU's
emulated graphics cards.
Since this protocol does not apply to QEMU environment, remove
both the PCD and the installation of the EFI Driver Supported EFI
Version Protocol.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add batch scripts to generate the LVFS compatible capsule
update driver.
Add DSC/FDF files to build capsules and invoke post build
shell scripts for Linux build environments.
Make versions consistent.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
In preparation for moving Vlv2TbltDevicePkg to the
edk2-platforms repository, the batch scripts used to build
this platform are updated to not make any assumptions about
the directory location of Vlv2TbltDevicePkg.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Update the binary file that contains the default configuration
settings. This file is generated using FCE.exe during a
Windows build and this binary file needs to be updated when
there are changes to the configuration setting layout or
configuration setting default values.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Add the PcdInitSmm module that should not have been
removed. This module performs actions at Exit Boot
Services to place devices in an OS compatible state.
Without this module, some versions of Linux can not
boot.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
The NumberOfEnabledProcessors parameter to the MP Services
Protocol service GetNumberOfProcessors() is not optional and is
not allowed to be NULL. Add the CpuEnabledCount local variable
and pass it into GetNumberOfProcessors().
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Add the arch protocols gEfiVariableArchProtocolGuid and
gEfiVariableWriteArchProtocolGuid to the dependency expression
for the AcpiPlatform module to guarantee that the variables
that AcpiPlatform depends upon are set before they are used by
this module.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Change the type of the local variable Size in the function
AcpiPlatformEntryPoint() from UINT32 to UINTN. This local
variable is passed into the function ReadSection() that returns
a value of type UINTN. Using type UINT32 can potentially
corrupt an adjacent local on the stack.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
If the FLASH device cannot be erased or written, then the
flag FlashError is set to TRUE.
Add the missing logic to return an error if FlashError
is TRUE. The missing logic was found from a GCC build that
noticed a local variable was declared and assigned, but was
not being used.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1721
Remove two inf files form EmulatorPkg.
About IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf,
this inf file is not included in the EmulaotrPkg.fdf,
which means the StatusCodePei.inf does't work at all,
so it is ok to remove it from EmulatorPkg.
About IntelFrameworkModulePkg/Bus/Pci/IdeBusDxe/IdeBusDxe.inf,
in the inf file, we can see it consumes gEfiIdeControllerInitProtocolGuid.
there are only two inf files in the edk project that produce this Protocol,
as belows:
PcAtChipsetPkg\Bus\Pci\IdeControllerDxe\IdeControllerDxe.inf
MdeModulePkg\Bus\Pci\SataControllerDxe\SataControllerDxe.inf
However, neither of them is included in the EmulatorPkg.dsc.
It means the IdeBusDxe.inf can't work at all,
so it is ok to remove it from EmulatorPkg.
Signed-off-by: Zhiguang Liu <zhiguang.liu@intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
DEPEX from PEI storage stack.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1777
BootInRecoveryMode Ppi dependency should be removed from PEI storage stack
drivers. Besides recovery, more features are using the storage stack.
Platform can apply Ppi dependency in Recovery FV which contains full
storage driver stack. Platform storage stack modules, such as host
controller init PEI module, should also remove this dependency.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao A Wu <hao.a.wu@intel.com>
Signed-off-by: Wei6 Xu <wei6.xu@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Reviewed-by: Chao B Zhang <chao.b.zhang@intel.com>
This reverts commit df7c81b5b2.
In commint df7c81b5b219c9,used a function to test python module
But the Boolean value of the return value of this function is the
opposite of the Correct result, resulting in an unexpected result
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1782
After change behavior to send BlockSid command at EndOfDxe point,
check device ownership command will return un-authority error, it
finally caused opal driver can't show "Enable Feature" menu.
Update the code logic to send detect device ownership command
before send BlockSID command.
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
This patch provides a set of include segment files for platform owner to
easily enable/disable network stack support on their platform.
For DSC, there are:
- a "NetworkDefines.dsc.inc" for the [Defines] section(s),
- a "NetworkLibs.dsc.inc" for the [LibraryClasses*] section(s),
- a "NetworkPcds.dsc.inc" for the [Pcds*] section(s),
- a "NetworkComponents.dsc.inc" for the [Components*] section(s).
For FDF, there is:
- a "Network.fdf.inc" for the [Fv*] section(s).
These files can be added to the platform DSC/FDF file by using
!include NetworkPkg/xxx
where "xxx" is the *.inc file name.
A platform DSC file can diverge from the defaults in
"NetworkDefines.dsc.inc" by setting the individual DEFINEs before
including "NetworkDefines.dsc.inc".
And, build command line ("-D FLAG=VALUE") can be used to enable or
disable related feature set, please check "NetworkDefines.dsc.inc"
for a detail description of each flag.
The default value of these flags are:
DEFINE NETWORK_ENABLE = TRUE
DEFINE NETWORK_SNP_ENABLE = TRUE
DEFINE NETWORK_IP4_ENABLE = TRUE
DEFINE NETWORK_IP6_ENABLE = TRUE
DEFINE NETWORK_TLS_ENABLE = TRUE
DEFINE NETWORK_HTTP_BOOT_ENABLE = TRUE
DEFINE NETWORK_ALLOW_HTTP_CONNECTIONS = FALSE
DEFINE NETWORK_ISCSI_ENABLE = TRUE
DEFINE NETWORK_VLAN_ENABLE = TRUE
Related BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1293
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Cc: Ting Ye <ting.ye@intel.com>
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
This is a shell application to dump dynamic PCD settings.
Type DumpDynPcd -?/h/H to get help information.
Type DumpDynPcd -v/V to get version information.
Type DumpDynPcd [PcdName] to get Pcd information.
https://bugzilla.tianocore.org/show_bug.cgi?id=1541
v2:1.Add static for global variables.
2.Change the parameter amount of InternalStrnCatGrow in DumpDynPcd.c.
3.Add open brace according to EDK II C Coding Standards Specification.
4.Remove the dependency on ShellPkg.dec in DumpDynPcd.inf.
v3:Add static for all global variables and internal functions.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao A Wu <hao.a.wu@intel.com>
Some systems such as FreeBSD identify the platform as 'arm64'
and not 'aarch64' as Linux does.
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
[lersek@redhat.com: fix up DKIM damage in the "From:" address]
When building OvmfPkg/EnrollDefaultKeys for IA32 with gcc-4.8 for the
DEBUG target (and possibly under other build configurations too), the
compiler incorrectly reports,
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c: In function
> 'ShellAppMain':
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:631:10: error:
> 'SizeOfPkKek1' may be used uninitialized in this function
> [-Werror=maybe-uninitialized]
> Status = EnrollListOfCerts (
> ^
> OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c:703:12: error: 'PkKek1'
> may be used uninitialized in this function [-Werror=maybe-uninitialized]
> FreePool (PkKek1);
> ^
> cc1: all warnings being treated as errors
Suppress this warning, in the style suggested under
<https://bugzilla.tianocore.org/show_bug.cgi?id=607>.
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: be9470b3c9
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1764
Some compiler flags restrict the compiler from making
arbitrary decisions while handling undefined C/C++ behaviors.
Therefore they can be used to fix some issues caused by undefined behavior.
For example, for GCC, the following flags are available:
-fno-delete-null-pointer-checks tells
the compiler NOT to assume that null pointer deference does not exist.
-fwrapv tells the compiler that signed overflow always wraps.
This patch is going to add these 2 build options to
BaseTool GCC build option.
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The following commit removed the unconditional UC setting
just prior to closing the SMRAM region. This is a correct
change for most platforms.
bfc87aa78e
The Quark platforms still require this UC setting, so move
the UC setting into the Quark specific SMM Access Protocol
when the Close() service is called.
Cc: Kelly Steele <kelly.steele@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Kelly Steele <kelly.steele@intel.com>
The CpuMpPei module uses a services from the CpuLib class,
but the CpuLib class is missing from the INF file. This
update is required to use the new MpInitLibUp instance that
does not use the CpuLib class.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Add a new instance of the MpInitLib that is designed for
uniprocessor platforms that require the use of modules
that depend on the MP_SERVICES_PROTOCOL for dispatch
or to retrieve information about the boot processor.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Set PcdSpeculationBarrierType to use CPUID instead of the
default LFENCE in the BaseLib function SpeculationBarrier().
LFENCE requires SSE2, and Quark platforms do not support
SSE2.
Cc: Kelly Steele <kelly.steele@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Michael Kubacki <michael.a.kubacki@intel.com>
Use PcdSpeculationBarrierType in the x86 implementation
of SpeculationBarrier() to select between AsmLfence(),
AsmCpuid(), and no operation.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <brian.johnson@hpe.com>
Add gEfiMdePkgTokenSpaceGuid.PcdSpeculationBarrierType that
uses the PCD type FixedAtBuild. This performs a build time
selection for the type of speculation barrier to use in the
BaseLib function SpeculationBarrier(). The recommended
speculation barrier for x86 is LFENCE and this is the default
value for this PCD. x86 CPUs that do not support LFENCE must
select one of the other supported values which includes CPUID
and nothing.
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Brian J. Johnson <brian.johnson@hpe.com>
On Xen, hvmloader firmware leaves address decoding enabled for
enumerated PCI device before jumping into OVMF. OVMF seems to
expect it to be disabled and tries to size PCI BARs in several places
without disabling it which causes BAR64, for example, being
incorrectly placed by QEMU.
Fix it by disabling PCI address decoding explicitly before the
first attempt to size BARs on Xen.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
In case BAR64 is placed below 4G choose the correct aperture.
This fixes a failed assertion down the code path.
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
This aperture doesn't exist in QEMU-XEN and hvmloader places BARs
in arbitrary order disregarding prefetchable bit. This makes
prefetchable and non-prefetchable BARs to follow each other that's
quite likely with PCI passthrough devices. In that case, the existing
code, that tries to work out aperture boundaries by reading hvmloader
BAR placement, will report a bogus prefetchable aperture which overlaps
with the regular one. It will eventually trigger an assertion in
DXE PCI initialization code.
Do the same thing as OVMF on QEMU-KVM and pass a non-existing aperture
there. It's not necessary to pass additional allocation flags as we set
ResourceAssigned flag on the root bridge which means they will be ignored.
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Disconnect the certificate that is enrolled as both Platform Key and first
Key Exchange Key from Red Hat: expect the hypervisor to specify it, as
part of SMBIOS.
Example usage with QEMU:
* Generate self-signed X509 certificate:
openssl req \
-x509 \
-newkey rsa:2048 \
-outform PEM \
-keyout PkKek1.private.key \
-out PkKek1.pem
(where "PEM" simply means "DER + base64 + header + footer").
* Strip the header, footer, and newline characters; prepend the
application prefix:
sed \
-e 's/^-----BEGIN CERTIFICATE-----$/4e32566d-8e9e-4f52-81d3-5bb9715f9727:/' \
-e '/^-----END CERTIFICATE-----$/d' \
PkKek1.pem \
| tr -d '\n' \
> PkKek1.oemstr
* Pass the certificate to EnrollDefaultKeys with the following QEMU
option:
-smbios type=11,value="$(< PkKek1.oemstr)"
(Note: for the above option to work correctly, a QEMU version is needed
that includes commit 950c4e6c94b1 ("opts: don't silently truncate long
option values", 2018-05-09). The first upstream release with that commit
was v3.0.0.
Once <https://bugs.launchpad.net/qemu/+bug/1826200> is fixed, QEMU will
learn to read the file directly; passing the blob on the command will be
necessary no more.)
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
According to the edk2 coding standards, "[w]hen all letters in an acronym
are capitalized, it makes the prior and subsequent words visually
difficult to distinguish".
Fix the spellings of three acronyms, accordingly:
- "KEK" (Key Exchange Key) should be written as "Kek", in "mMicrosoftKEK",
- "CA" (Certificate Authority) should be written as "Ca", in
"mMicrosoftUefiCA",
- "PCA" (Production Certificate Authority) should be written as "Pca", in
"mMicrosoftPCA".
Generate the changes with:
sed --regexp-extended --in-place \
--expression='s,\<mMicrosoftKEK\>,mMicrosoftKek,g' \
--expression='s,\<mMicrosoftUefiCA\>,mMicrosoftUefiCa,g' \
--expression='s,\<mMicrosoftPCA\>,mMicrosoftPca,g' \
OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.c
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@arm.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Having removed VALID_ARCHITECTURES from
"OvmfPkg/EnrollDefaultKeys/EnrollDefaultKeys.inf", it now makes sense to
reflect the related platform DSC bits from OvmfPkg to ArmVirtPkg.
Build "EnrollDefaultKeys.efi" as part of ArmVirtQemu and ArmVirtQemuKernel
(which are the ArmVirtPkg platforms that include SecureBootConfigDxe too).
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1747
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Gary Lin <glin@suse.com>
Latest change allowed to add dependency on NvVarStoreFormattedLib
for the DXE_DRIVER modules. Although effectively it is hooked
using the 'NULL' class, extend the LIBRARY_CLASS with according
type for consistency sake.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Zailiang Sun <zailiang.sun@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1460
Add a new API ResetSystem to this ResetSystemLib instance.
It only adds the basic functions from ResetSystemRuntimeDxe.
Lacking of this interface may cause link error, if some drivers
use this new API and link to this library instance.
Notes:
This library API only provide a basic function of reset. Full
function should use the instance in the MdeModulePkg and make
sure the depex driver is dispatched.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Microsoft ASL is not verified now.
So remove tool chain with ASL tool. They are: VS2008xASL,
VS2008x86xASL, VS2010xASL, VS2010x86xASL, VS2012xASL, VS2012x86xASL,
VS2013xASL, VS2013x86xASL, VS2015xASL, VS2015x86xASL and CYGGCCxASL.
https://bugzilla.tianocore.org/show_bug.cgi?id=1667
v2:Remove definitions of WIN_ASL_BIN, MS_ASL_OUTFLAGS and MS_ASL_FLAGS.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1597
Currently RTData are allocated at/after ReadyToBoot to store the
contents in HiiDatabase and the HII configurations for OS runtime
utilization.
Some platforms may meet S4 resume issue since the allocation after
ReadyToBoot cause memory map change.
Now this patch is to do some overallocation to minimize the number
of memory allocations after ReadyToBoot and also add warning
message when do allocation after ReadyToBoot.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
After commit 57df17fe26, some static check reports suspicious NULL pointer
deference at line:
Entry->MachineType = Entry->Emulator->MachineType;
^^^^^^^^^^^^^^^
within function PeCoffEmuProtocolNotify().
However, 'Entry->Emulator' is guaranteed to have a non-NULL value when
previous call to the CoreHandleProtocol() returns EFI_SUCCESS.
This commit will re-write the return status check for CoreHandleProtocol()
to add explicit NULL pointer check for protocol instance pointer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Some modules (such as FaultTolerantWriteDxe) use the FlashNvStorage
PCDs (PcdFlashNvStorageFtw*). In case the flash contents are not
mapped in memory, the module loading order of the FVB driver
may become important.
To handle above, this patch allows to hook the dependency of
desired DXE_DRIVER type module in the .DSC file via
NvVarStoreFormattedLib NULL resolution.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
When building OpenSSL, the OpenBSD/FreeBSD/DFBSD code in crypto/uid.c
calls issetugid(). Add the declaration of this function to
CrtLibSupport.h to avoid the need to patch the openssl code on these
platforms.
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jian Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
This commit will add the PEI BlockIO (2) PPIs support for AHCI mode ATA
devices.
More specifically, the driver will consume the ATA AHCI host controller
PPI for ATA controllers working under AHCI code within the system. And
then produces the below additional PPIs for each controller:
EFI PEI Recovery Block IO PPI
EFI PEI Recovery Block IO2 PPI
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1483
Due to the limited resource on the VTd DMA buffer size in the PEI phase,
the driver will limit the maximum transfer block number for 48-bit
addressing.
According to PCDs:
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSize|0x00400000
gIntelSiliconPkgTokenSpaceGuid.PcdVTdPeiDmaBufferSizeS3|0x00200000
The default buffer size allocated for IOMMU mapping is:
* 4M bytes for non-S3 cases;
* 2M bytes for S3
For ATA devices in 48-bit address mode, the maximum block number is
currently set to 0xFFFF. For a device with block size equal to 512 bytes,
the maximum buffer allowed for mapping within AhciPei driver will be close
to 32M bytes. Thus, this commit will limit the 48-bit mode maximum block
number to 0x800, which means 1M-byte maximum buffer for mapping when the
block size of a device is 512 bytes. By doing so, potential failure on
calls to the IOMMU 'Map' service can be avoided.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
The DxeCapsuleLibFmp code accesses the ESRT table to decide whether
a certain capsule is an FMP capsule. Since the UEFI spec mandates
that the ESRT resides in EfiBootServicesData memory, this results
in problems at OS runtime, since the firmware implementation itself
cannot access memory that has not been virtually remapped.
So let's take a private copy of the ESRT at ReadyToBoot, and store
it in EfiRuntimeServicesData memory. The ESRT's size is order 10s
of bytes so the memory footprint is going to be negligigble.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Removed Gang Wei from reviewer as he already left.
Updated Wang Jian to Maintainer of CryptoPkg and Ye Ting to reviewer of CryptoPkg.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ting Ye <ting.ye@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1729
On some build environment, build fails but on the other build machines,
build success. This is the regression issue introduced by commit
05217d210e
As Dict is unordered, an error occurs when extract the index of the Dict
in the order of the keys after the creation of a new item.
Keys are indexed inconsistently before and after adding a new item.
The logic of the program is to store the key's corresponding index as
reference data in the MakeFile and use it as part of the macro.
The data model is: $(LIST_%d) % Dict.keys().index(Key)
So for now, use OrdereDict instead of Dict.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1695
Setup need provide an item for user to control IPV46 PXE boot.
Origin UefiPxeBcDxe driver doesn't have such interface.
This change added two PCD to control IPV4/6 PXE in PxeBcSupported().
Platform code should override this two PCD according to Setup value.
code change no side effect on current PXE function with default PCD.
Signed-off-by: Xue ShengfengX <shengfengx.xue@intel.com>
Cc: Siyuan Fu <siyuan.fu@intel.com>
Cc: Jiaxin Wu <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
The real mode interrupt vector table, which we modify for the sake of
Windows 7, starts at address 0, which happens to be the representation of
null pointers on all edk2 architectures. A null pointer may never undergo
pointer arithmetic, and RH covscan justifiedly reports:
> Error: CPPCHECK_WARNING (CWE-682):
> edk2-89910a39dcfd/OvmfPkg/QemuVideoDxe/VbeShim.c:105:
> error[nullPointerArithmetic]: Pointer addition with NULL pointer.
> # 103| //
> # 104| Segment0Pages = 1;
> # 105|-> Int0x10 = (IVT_ENTRY *)(UINTN)Segment0 + 0x10;
> # 106| Segment0AllocationStatus = gBS->AllocatePages (
> # 107| AllocateAddress,
Fix this by calculating the EFI_PHYSICAL_ADDRESS of IVT entry 0x10 first,
and by casting the address to the right type second.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1710
Issue: scan-1002.txt
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use HpetTimerDxe instead of SmartTimer protocol. Retire 8259 as well.
Tested boot to Win10x64 successfully.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
Use MdeModulePkg declaration of ResetSystem function, comment the one
in platform source code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Reviewed-by: Yi Qian <yi.qian@intel.com>
As reported by Gary, the recent LoadImage/StartImage changes to
accommodate dispatching PE/COFF images built for foreign architectures
may result in a crash when loading an IA32 option ROM into a X64 VM
running OVMF:
Loading driver at 0x0007E537000 EntryPoint=0x0007E53C06D 8086100e.efi
InstallProtocolInterface: BC62157E-3E33-4FEC-9920-2D3B36D750DF 7F003B98
ProtectUefiImageCommon - 0x7F002BC0
- 0x000000007E537000 - 0x000000000009F900
Image type IA32 can't be started on X64 UEFI system.
ASSERT MdeModulePkg/Core/Dxe/Mem/Pool.c(698): Head->Signature == ((('p') |
('h' << 8)) | ((('d') | ('0' << 8)) << 16)) || Head->Signature
== ((('p') | ('h' << 8)) | ((('d') | ('1' << 8)) << 16))
This turns out to be caused by the deferred image loading code in BDS,
which ends up trying to free an uninitialized 'ExitData' pointer.
Given that ExitData is never actually used, let's just get rid of it
entirely. While we're at it, drop the pointless assignment of Status
as well.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
GenerateCapsule: error: can not encode FMP Auth Header
The system cannot find the file specified.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1716
In API mode FSP wrapper will perform some post
FSP-S process but such process was skipped in Dispatch
mode which may impact some of the boot loaders.
To align behavior between API and Dispatch, an
End-of-Pei callback is introduced to perform same process
in Dispatch mode.
Note: If boot loader implemented its own
PostFspsHobProcess (), it has to check
PcdFspModeSelection and support each mode
properly.
Test: Verified on internal platform and both
FSP API and Dispatch modes booted successfully.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
CorebootModulePkg and CorebootPayloadPkg originally supports coreboot only.
In order to support other bootloaders, such as Slim Bootloader, they need
be updated to be more generic.
UEFI Payload (UefiPayloadPkg) a converged package from CorebootModulePkg
and CorebootPayloadPkg with following updates:
a. Support both coreboot and Slim Bootloader
b. Removed SataControllerDxe and BaseSerialPortLib16550 to use EDK2 modules
c. Support passing bootloader parameter to UEFI payload, e.g. coreboot
table from coreboot or HOB list from Slim Bootloader
d. Using GraphicsOutputDxe from EDK2 with minor change instead of FbGop
e. Remove the dependency to IntelFrameworkPkg and IntelFrameworkModulePkg
and QuarkSocPkg
f. Use BaseDebugLibSerialPort library as DebugLib
g. Use HPET timer, drop legacy 8254 timer support
h. Use BaseXApicX2ApicLib instead of BaseXApicLib
i. Remove HOB gUefiFrameBufferInfoGuid to use EDK2 graphics HOBs.
j. Other clean ups
On how UefiPayloadPkg could work with coreboot/Slim Bootloader, please
refer UefiPayloadPkg/BuildAndIntegrationInstructions.txt
Once UefiPayloadPkg is checked-in, CorebootModulePkg and CorebootPayloadPkg
could be retired.
Signed-off-by: Guo Dong <guo.dong@intel.com>
Reviewed-by: Maurice Ma <maurice.ma@intel.com>
Now that the EBC machine type is no longer classified as a
natively supported machine type on the architectures that can
support it via the EBC interpreter, the EBC specific handling
in DXE core is no longer used and can be removed.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Instead of classifying EBC as a supported machine type and have special
handling in DXE core for loading EBC images, make it a foreign type and
rely on the EDK2 PE/COFF image emulator protocol to claim the image when
the DXE core finds that it cannot be supported natively.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Implement the new EDK2 PE/COFF image emulator protocol so that we can
remove the EBC specific handling in the DXE core and other places in
the core code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Allow PE/COFF images that must execute under emulation for Driver####
options, by removing the redundant machine type check from the BDS code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Delete the explicit machine type check for option ROM images, and instead,
rely on the LoadImage() boot service to decide whether an option ROM can
be dispatched or not. This permits platforms to ship with emulators to
execute option ROMs that are not native to the processor architecture.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
When encountering PE/COFF images that cannot be supported natively,
attempt to locate an instance of the PE/COFF image emulator protocol,
and if it supports the image, proceed with loading it and register it
with the emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Introduce a protocol that can be invoked by the image loading services
to execute foreign architecture PE/COFF images via an emulator.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1153
The '-s' option of 'acpiview' do not support multiply invcation options.
So clarify it for users.
Modify the help decription for UefiShellAcpiViewCommandLib which the
description is equal or over 80 column. If the line include equal or over
80 characters. The display engine would display a blank line for those
equal 80 characters or a extra line with few words for those over 80
character. So it is better to keep each line less than 80 characters.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
This commit will remove the IntelFrameworkPkg DEC file dependency in the
driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8254TimerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8254TimerDxe driver in OVMF
DSC/FDF files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1496
Several updates have been made to the
OvmfPkg/8259InterruptControllerDxe driver to make it build under OvmfPkg:
A) Update the driver INF file to consume PCDs defined within OvmfPkg;
B) Remove the unnecessary dependency on the IntelFrameworkPkg header file
'FrameworkDxe.h';
C) Remove the IntelFrameworkPkg & PcAtChipsetPkg DEC files dependency in
the driver INF file.
A new GUID has been updated for the INF file.
Corresponding changes have been made in OVMF DSC files as well in order to
verify the build.
Please note that a subsequent commit (final patch of the series) will:
A) Add OvmfPkg/8259InterruptControllerDxe driver in OVMF FDF files;
B) Remove the consumption of PcAtChipsetPkg/8259InterruptControllerDxe
driver in OVMF DSC/FDF files;
C) Remove the consumption of
gPcAtChipsetPkgTokenSpaceGuid.Pcd8259LegacyModeEdgeLevel in OVMF DSC
files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ray Ni <ray.ni@intel.com>
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Fix a few typos in LegacyBiosBuildE820, and improve the debug output of
the E820 table to pad with zeros instead of spaces, remove extra hyphens
and display the memory type in decimal.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and Tiano
decompress functionality.
Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Andrew Fish <afish@apple.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
V2: Add a single UefiDecompressLib resolution to the
common section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in BeagleBoardPkg.fdf
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. A single UefiDecompressLib common resolution can
apply to all module types now. So add the single
UefiDecompressLib in MdePkg in [LibraryClasses.common]
section and remove all others.
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1683
V2: Use the common UefiDecompressLib resolution in
[LibraryClasses.common] section and drop all the others.
BaseUefiDecompressLib in MdePkg is the
base UEFI decompress Library.
BaseUefiTianoCustomDecompressLib in IntelFrameworkModulePkg
implements the base UEFI decompress functionality and
Tiano decompress functionality.
1. TIANOCOMPRESSED rule in ArmVirtRules.fdf.inc
is not used, so remove it.
2. Platform doesn't use the TianoCompress, so do
not have to use BaseUefiTianoCustomDecompressLib,
can use the BaseUefiDecompressLib in MdePkg directly.
3. UefiDecompressLib common resolution now can apply to
all module types. So keep the UefiDecompressLib resolution
in [LibraryClasses.common] section and remove all others.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1450
In the Multiple thread Genfds feature, build tool generates
GenSec, GenFFS command in Makefile.
The Non-Hii Driver does not generate .offset file for uni string offset,
but the build tool has not knowledge about this in autogen phase. So
in this patch, I add a check in Makefile for GenSec command. If the GenSec
input file does not exist, the GenSec will not be called. And if GenSec
command is not called, its output file, which is also the input file of
GenFfs command, will also not exist.So for GenFfs command,
I add a new command parameter -oi which means
the input file is an optional input file which would not exist. so
that I can generate GenFfs command with "-oi" parameter in Makefile.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1628
Current FbGop driver might bind to the wrong PCI device
if a system has multiple PCI display devices. The original
idea was to reuse the generic GraphicsOutputDxe to address
this issue. However, after exploring different approaches
discussed in the bugzilla, it turned out that the best
approach is to enhance the current FbGop driver to match
the PCI device BAR value with the framebuffer base address.
This patch implemented this enhancement by selecting the
PCI device with matched framebuffer base in its PCI BAR.
This has been tested with coreboot on QEMU and Apollo Lake
platform.
Cc: Prince Agyeman <prince.agyeman@intel.com>
Cc: Benjamin You <benjamin.you@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Maurice Ma <maurice.ma@intel.com>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Reserved6 is changed to Reserved7 because the bit width is changed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
GetProcessorLocation2ByApicId() extracts the
package/die/tile/module/core/thread ID from the initial APIC ID.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
Leaf 1FH is very similar to leaf 0BH. Both return the CPU topology
information.
Leaf 0BH returns 3-level (Package/Core/Thread) CPU topology info.
Leaf 1FH returns 6-level (Package/Die/Tile/Module/Core/Thread) CPU
topology info.
The logic to enumerate the topology info is the same.
But today's logic to handle 1FH is completely wrong.
The patch combines them together to fix the 1FH issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
Per SDM CPUID.0BH and CPUID.1FH outputs the same format of data in
EAX/EBX/ECX/EDX except CPUID.1FH reports more level types such as
module, tile, die.
The patch removes the unnecessary duplicated structure definitions
for CPUID.1FH because when the structure definitions for CPUID.0BH
can be used for CPUID.1FH.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Zhiqiang Qin <zhiqiang.qin@intel.com>
PcdCpuFeaturesSupport used to specify the platform policy about
what CPU features this platform supports. This PCD will be used
in IsCpuFeatureSupported only.
Now RegisterCpuFeaturesLib use this PCD as an template to Get the
pcd size. Update the code logic to replace it with
PcdCpuFeaturesSetting.
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
PcdCpuFeaturesUserConfiguration.
Merge PcdCpuFeaturesUserConfiguration into PcdCpuFeaturesSetting.
Use PcdCpuFeaturesSetting as input for the user input feature setting
Use PcdCpuFeaturesSetting as output for the final CPU feature setting
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1375
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
V2 changes:
Update the commit message and comments in the code.
When waking vector buffer allocated by CpuDxe is tested by MemTest86
in MP mode, an error is reported because the same range of memory is
modified by both CpuDxe driver and MemTest86.
The waking vector buffer is not expected to be tested by MemTest86 if
it is allocated out because MemTest86 only tests free memory. But
current CpuDxe driver "borrows" buffer instead of allocate buffer for
waking vector buffer (through allocate & free to get the buffer
pointer, backup the buffer data before using it and restore it after
using). With this implementation, if the buffer borrowed is not used
by any other drivers, MemTest86 tool will treat it as free memory
and test it.
In order to fix the above issue, CpuDxe changes to allocate the
buffer below 1M instead of borrowing it. But directly allocating
memory below 1MB causes LegacyBios driver fails to start. LegacyBios
driver allocates memory range from
"0xA0000 - PcdEbdaReservedMemorySize" to 0xA0000 as Ebda Reserved
Memory. The minimum value for "0xA0000 - PcdEbdaReservedMemorySize"
is 0x88000. If LegacyBios driver allocate this range failed, it
asserts.
LegacyBios also reserves range from 0x60000 to
"0x60000 + PcdOpromReservedMemorySize", it will be used as Oprom
Reserve Memory. The maximum value for "0x60000 +
PcdOpromReservedMemorySize" is 0x88000. LegacyBios driver tries to
allocate these range page(4K size) by page. It just reports warning
message if some pages are already allocated by others.
Base on above investigation, one page in range 0x60000 ~ 0x88000 can
be used as the waking vector buffer.
LegacyBios driver only reports warning when page allocation in range
[0x60000, 0x88000) fails. This library is consumed by CpuDxe driver
to produce CPU Arch protocol. LagacyBios driver depends on CPU Arch
protocol which guarantees below allocation runs earlier than
LegacyBios driver.
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
AsmFuncs.S is removed at c7d22535f7.
And also it should be removed in SecPeiDebugAgentLib.inf and
SmmDebugAgentLib.inf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1462
Original logic is that checking the CapsuleUpdate variable
and do the EnterS3WithImmediateWake if the system require a
capsule update. The EnterS3WithImmediateWake is usually
implemented in Platform ResetSystemLib instance and it may
do some operation for capsule update. For now, thess preparations
of capsule are platform reset notify functions' duty. Most
platforms need flush cache to memory before warm reset during
capsule update and this operation is added to capsule flow.
So it is safe to remove it and do not affect the capsule update
function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhichao Gao <zhichao.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PACKAGES_PATH is supposed to set manually by users. Remove the
assignment statement for PACKAGES_PATH from batch file in this commit.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zailiang Sun <zailiang.sun@intel.com>
Cc: David Wei <david.wei@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1495
This commit will add a static build flag 'USE_LEGACY_ISA_STACK' to select
the ISA driver stack.
If the flag is set to TRUE, the below driver stack will be used:
PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf
IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf
IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf
IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf
If the flag is set to FALSE, the below driver stack will be used:
OvmfPkg/SioBusDxe/SioBusDxe.inf
MdeModulePkg/Bus/Pci/PciSioSerialDxe/PciSioSerialDxe.inf
MdeModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2KeyboardDxe.inf
The default value is set to FALSE in OVMF DSC files.
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Anthony PERARD <anthony.perard@citrix.com>
EdkCompatibilityPkg will be removed from edk2/master.
The dependency about EdkCompatibilityPkg in Nt32Pkg.dsc should
also be removed.
Cc: Ray Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Commit 05fd2a9268
("MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox")
added a dependency on LockBoxLib to NvmExpressPei, causing builds using
MdeModulePkg.dsc to fail on architectures other than IA32/X64 with
missing reference to
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode.
Add a resolution for LockBoxNullLib for ARM/AARCH64 to restore builds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The system environment: virtual-CDROM(USB interface) via BMC, insert a
iso file to CDROM, like ubuntu-18.04.1-server-arm64.iso, change CDROM
to first boot option.
With release version bios, disconnecting CDROM when boot to
"1 seconds left, Press Esc or F2 to enter Setup"
then system will get a exception.
The root cause is the EFI_BLOCK_IO_PROTOCOL for UsbMass will be uninstalled
in this situation after print some transfer error. The status will be
invalid parameter. This line will get a exception for BlockIo not point
to right address:
AllocatePool (BlockIo->Media->BlockSize)
So, here need to judge the status after ASSERT_EFI_ERROR.
The Bugzilla tracker for this:
https://bugzilla.tianocore.org/show_bug.cgi?id=1631
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This patch was originally merged in edk2 master at
07f4e26eb6. However, this was
later reverted at 4c20a79133
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
d3a15f435f. However, this was
later reverted at 82c4426a17
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
6814256083. However, this was
later reverted at db8382ef5e
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch originally merged in edk2 master at
c788bdaba4. However, this was
later reverted at bdbbedea94
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
1d49a75367. However, this was
later reverted at 334111b0da
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch was originally merged in edk2 master at
bde673b2dc. However, this was
later reverted at 7d180efeaa
as it was merged during the Soft Feature Freeze for
edk2-stable201903.
Resubmitting this patch as the edk2 merge window is now open.
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Alexei Fedorov <alexei.fedorov@arm.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added conditional choice for Logo.inf in PlatformPkg.fdf, based on the build
ARCH information. And Changed the location of binary object files to align
with previous releases (%WORKSPACE%\silicon).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Moved stuff in the three old packages IA32FamilyCpuPkg, Vlv2BinaryPkg and
Vlv2MiscBinariesPkg into a new package Vlv2SocBinPkg. Updated the build scripts
and added build instructions in Readme.md.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Remove modules of EdkCompatibilityPkg from DSC/FDF of Vlv2TbltDevicePkg to make
this platform ECP free.
Test: Boot to 64-bit Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Having a top-level .dsc makes it easier to perform standalone build
tests of the core code, so add one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
This patch changes the stated dependency in AcpiDbg2LibArm.inf from
currently listed SerialPortLib to actually required PL011UartLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1621
According to Intel SDM as below, the BIT0 should be treated as
lock bit, and BIT1 should be treated as disable(1)/enable(0) bit.
"11b: AES instructions are not available until next
RESET.
Otherwise, AES instructions are available.
If the configuration is not 01b, AES
instructions can be mis-configured if a privileged agent
unintentionally writes 11b"
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Chandana Kumar <chandana.c.kumar@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
If SD doesn't support SD_HIGH_SPEED, function should still continue to
setup SD to go into 4 bits more if it is supported. Currently, the code
inadvertently exits early, but with a EFI_SUCCESS return code, and so
execution proceeds without ever attempting to enable 4-bit mode.
Since not having SD_HIGH_SPEED support is not an error, downgrade the
message that reports this to DEBUG_INFO.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Loh Tien Hock <tien.hock.loh@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Rework some file open().readlines to open, readlines, close.
This prevents excessive file handles being open at the same time,
which may be a problem with alternative python environments.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Michael Johnson <michael.johnson@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1620
This option is added to disable the include path check
for outside of package.
The original purpose of thie check is to make sure EDK II
modules must not reference header files outside of the packages
they depend on or within the module's directory tree.
However, we do see the usage to build EDKII as executable running
in the operating system which requires include path to outside.
For example, EmulatorPkg. The current solution (soft link) is
weird hack - EmulatorPkg\Unix\Host\X11IncludeHack.
With this solution, this can be supported easily.
The patch is validated with and without --disable-include-path-check.
If user does not use --disable-include-path-check, the build will fail
with outside path in the include path.
If user uses --disable-include-path-check, the build will pass
with outside path in the include path.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1499
Compiler cache can greatly improve the build performance and
guarantee the build result safe. In our testing, the compiler
cache can improve the overall clean build time usually by 30+%
in linux and 10+% in windows. The compiler cache are very fit
to improve the Continuous Integration (CI) build performance.
For linux compiler cache (ccache) enabling, there is no need
to update edk2 code.
Below link has the ccache enabling referencd steps:
https://github.com/shijunjing/edk2/wiki/
Edk2-compiler-cache-enabling-steps-on-Linux
For windows compiler cache (clcache) enabling, we need update
the .PDB debugging file producing option from /Zi to /Z7,
which is to let the C object file contain its full symbolic
debugging information rather than produces a separated PDB file
for all obj files per folder. "PDB files are generated by a different
process (mspdbsrv). They arrive or are updated on disk after
cl completes a compilation or linking operation. One huge problem
with caching them is that the pdb files are input files as well as
outputs. mspdbsrv updates the file with new debug information if
the file exists beforehand. If there are several compilations going
on at once targetting the same pdb then the order the pdb gets
updated is unpredictable. All this makes caching very hard."
The /Zi issue more detail disccusion can be found:
https://github.com/frerich/clcache/issues/30
Please be aware that this change has no any impact to edk2 module
level PDB file generation, and we still can get the PDB debug file
for a .efi module. The /Z7 only impact intermediate obj files level
PDB file, which is current one PDB file (vc140.pdb) per obj folder.
Below link has the clcache enabling referencd steps:
https://github.com/shijunjing/edk2/wiki/
Edk2-compiler-cache-enabling-steps-on-Windows
Have tested below tools which consume the .PDB file:
*Edk2 source code debugger
*Various hardware and software debuggers
*Uefi code coverage tools
Only update and test below most commonly used four msvc toolchains:
VS2012x86 VS2013x86 VS2015x86 VS2017
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Steven Shi <steven.shi@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The PCD PcdStandaloneMmEnable is unused, and shouldn't exist in the
first place since the value is implied by the context (it is never
valid to set it to FALSE for standalone MM or TRUE for traditional
MM). So drop it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Remove the support that permits calls into the MM context to dispatch
firmware volumes that are not part of the initial standalone MM firmware
volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Instead of deferring dispatch of the remaining MM drivers once the
CPU driver has been dispatched, proceed and dispatch all drivers.
This makes sense for standalone MM, since all dispatchable drivers
should be present in the initial firmware volume anyway: dispatch
of additional FVs originating in the non-secure side is not supported.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Standalone MM requires 4 KB section alignment for all images, so that
strict permissions can be applied. Unfortunately, this results in a
lot of wasted space, which is usually costly in the secure world
environment that standalone MM is expected to operate in.
So let's permit the standalone MM drivers (but not the core) to be
delivered in a compressed firmware volume.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Sending DEBUG output to the serial port should only be done via
DebugLib calls, which is in charge of initializing the serial
port when appropriate. So drop the explicit SerialPortInitialize ()
invocation, and rely on normal constructor ordering to get the
serial port into the appropriate state at the right time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Building StandaloneMmPkg from its .DSC is mainly intended for build
coverage, and so platform specific configuration such as UART addresses
don't belong here.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
gEfiMmConfigurationProtocolGuid is already defined in MdePkg, so drop
the duplicate definition from StandaloneMmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by "Yao, Jiewen" <jiewen.yao@intel.com>
In a system implementing the variable store in MM, there are no variable
arch protocol and variable write arch protocol installed into the
DXE_SMM protocol database. On such systems, it is not required to
locate these protocols by the DXE runtime variable drivers because
it can be assumed that these protocols are already installed in the
MM context. But then such an implementation will deviate from the
existing traditional MM based variable driver implementation.
So in order to maintain consistency with the traditional MM variable
driver implementation, allow platforms to install these protocols into
the DXE protocol database but these protocol will not be consumed
by non-secure variable service runtime driver.
The Platform which uses StandaloneMM based secure variable storage
have to include this library
Example
In edk2-platforms/Platform/ARM/SgiPkg/SgiPlatform.dsc
ArmPkg/Drivers/MmCommunicationDxe/MmCommunication.inf {
<LibraryClasses>
NULL|StandaloneMmPkg/Library/VariableMmDependency/VariableMmDependency.inf
}
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Acked-by "Yao, Jiewen" <jiewen.yao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Driver was supporting only 32b DMA support for V3 controllers. Add
support for 64b DMA as well for completeness.
For V4.0 64b support, driver was looking at incorrect capability
register bit. Fix for that is present as well.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1583
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Tested-by: Eugene Cohen <eugene@hp.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The current servers listed appear to be unusable. I suspect most
people will get correct DNS servers via DHCP, but the defaults
should work for anyone.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rebecca Cran <rebecca@bluestop.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1135
For 4bit BMP, there are only 2^4 = 16 colors in the palette.
But when a corrupted BMP contains more than 16 colors in the palette,
today's implementation wrongly copies all colors to the local
PaletteValue[16] array which causes stack overflow.
The similar issue also exists in the logic to handle 8bit BMP.
The patch fixes the issue by only copies the first 16 or 256 colors
in the palette depending on the BMP type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The Microcode region indicated by MicrocodePatchAddress PCD may contain
more than one Microcode entry. We should save InCompleteCheckSum32 value
for each payload. Move the logic for calculate InCompleteCheckSum32 from
the outsize of the do-while loop to the inside.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1576
The root cause of this issue is that non-stop mode of Heap Guard and
NULL Detection set TF bit (single-step) in EFLAG unconditionally in
the common handler in CpuExceptionLib.
If PcdCpuSmmStaticPageTable is FALSE, the SMM will only create page
table for memory below 4G. If SMM tries to access memory beyond 4G,
a page fault exception will be triggered and the memory to access
will be added to page table so that SMM code can continue the access.
Because of above issue, the TF bit is set after the page fault is
handled and then fall into another DEBUG exception. Since non-stop
mode of Heap Guard and NULL Detection are not enabled, no special
DEBUG exception handler is registered. The default handler just
prints exception context and go into dead loop.
Actually EFLAGS can be changed in any standard exception handler.
There's no need to do single-step setup in assembly code. So the fix
is to move the logic to C code part of page fault exception handler
so that we can fully validate the configuration and prevent TF bit
from being set unexpectedly.
Fixes: dcc026217f16b918bbaf
Test:
- Pass special test of accessing memory beyond 4G in SMM mode
- Boot to OS with Qemu emulator platform (Fedora27, Ubuntu18.04,
Windows7, Windows10)
Cc: Eric Dong <eric.dong@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1577
In WiFi Connection Manager scan process, the result received
from WiFi device driver will be freed twice, and will cause
unexpected errors, and even system crash.
This issue also exists in some other places potentially, this
patch is to fix these issues and also add Timer Cancelling
before Close to avoid potential NULL reference.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=864
REF: CVE-2018-3630
To follow PI spec, ensure FfsFileHeader 8 bytes aligned.
For the integrity of FV(especially non-MemoryMapped FV) layout,
let CachedFv point to FV beginning, but not (FV + FV header).
And current code only handles (FwVolHeader->ExtHeaderOffset != 0) path,
update code to also handle (FwVolHeader->ExtHeaderOffset == 0) path.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
This reverts commit 838bc257ba.
After further evaluation, there are the unclear behavior in for the
driver combination feature. To not impact Q1 stable tag, remove it first.
1. If the drivers to be combined have the different PCD or library instance
setting, build should not combine them and report build break. But this
commit doesn't consider this case.
2. When start the sub driver fail, continue to start other sub driver. This
behavior is required to be clarifed in build spec.
3. Unload the sub driver when the combined driver start fail. This case need
to call the sub driver unload function for the driver start fail only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
* V2
* Remove Arch dependency in Inf file
* Add a global guid for WiFi formset and set other guids to module levels
* Open supplicant and EapConfig by BY_DRIVER
* Remove token free function to avoid potential NULL reference
* Update WifiMgrUpdateConnectMessage() to only display message for Current Nic
* Fix the potential NULL reference in AIP call
* REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1492
Add WiFi Connection Manager in NetworkPkg to provide UI for users to scan
networks, connect or disconnect to networks.
This connection manager won't include the UNDI driver, supplicant driver,
or other device specific drivers and is therefor not a complete solution
stack for UEFI Wi-Fi, users can seek help for Wireless card vendors.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang Fan <fan.wang@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1521
We scan the SMM code with ROPgadget.
http://shell-storm.org/project/ROPgadget/https://github.com/JonathanSalwan/ROPgadget/tree/master
This tool reports the gadget in SMM driver.
This patch enabled CET ShadowStack for X86 SMM.
If CET is supported, SMM will enable CET ShadowStack.
SMM CET will save the OS CET context at SmmEntry and
restore OS CET context at SmmExit.
Test:
1) test Intel internal platform (x64 only, CET enabled/disabled)
Boot test:
CET supported or not supported CPU
on CET supported platform
CET enabled/disabled
PcdCpuSmmCetEnable enabled/disabled
Single core/Multiple core
PcdCpuSmmStackGuard enabled/disabled
PcdCpuSmmProfileEnable enabled/disabled
PcdCpuSmmStaticPageTable enabled/disabled
CET exception test:
#CF generated with PcdCpuSmmStackGuard enabled/disabled.
Other exception test:
#PF for normal stack overflow
#PF for NX protection
#PF for RO protection
CET env test:
Launch SMM in CET enabled/disabled environment (DXE) - no impact to DXE
The test case can be found at
https://github.com/jyao1/SecurityEx/tree/master/ControlFlowPkg
2) test ovmf (both IA32 and X64 SMM, CET disabled only)
test OvmfIa32/Ovmf3264, with -D SMM_REQUIRE.
qemu-system-x86_64.exe -machine q35,smm=on -smp 4
-serial file:serial.log
-drive if=pflash,format=raw,unit=0,file=OVMF_CODE.fd,readonly=on
-drive if=pflash,format=raw,unit=1,file=OVMF_VARS.fd
QEMU emulator version 3.1.0 (v3.1.0-11736-g7a30e7adb0-dirty)
3) not tested
IA32 CET enabled platform
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yao Jiewen <jiewen.yao@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Fix CVE-2018-12178
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=809
The DNS driver only checks the received packet size against the
minimum DNS header size in DnsOnPacketReceived(), later it accesses
the QueryName and QuerySection beyond the header scope, which might
cause the pointer within DNS driver points to an invalid entry or
modifies the memory content beyond the header scope.
This patch is to fix above problem.
Cc: Ye Ting <ting.ye@intel.com>
Cc: Fu Siyuan <siyuan.fu@intel.com>
Cc: Wang Fan <fan.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Wu Jiaxin <jiaxin.wu@intel.com>
Reviewed-by: Siyuan Fu <siyuan.fu@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1134
Originally, the block size of created Ram disks is hard-coded to 512
bytes. However, if the total size of the Ram disk is not a multiple of 512
bytes, there will be potential memory access issues when dealing with the
last block of the Ram disk.
This commit will adjust the block size of the Ram disks to ensure that the
total size is a multiple of the block size.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
According to ARM Generic Interrupt Controller Architecture
Specification, GIC architecture version 3.0 and version 4.0,
GICD_IROUTER<n> is a 64-bit register.
Fixed code to use 64 bit MMIO write operations so that the
Aff3 value (bits [39:32]) is written to GICD_IROUTER<n>.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reported-by: Carl van Schaik <carl@cog.systems>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
LibGetTime():
- Two variables were used for the epoch, where only one should have been [*].
- Also harmonize variable name to match the one used in LibSetTime.
LibSetTime():
- Address possible underflows if time is set to start of epoch.
- Ensure that time being read does actually match time that was manually
set (plus the time elapsed since), by subtracting number of seconds
since reset.
[*] This fixes a build breakage, since one of these variables was set but
never used, triggering a compiler diagnostic at some optimization levels.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Steps:
1. Download edk2 tree
2. Build BaseTools
3. Go to edk2\BaseTools\Scripts\PackageDocumentTools
to run packagedoc_cli.py
An error occurs if relative imports are used when running
a file alone
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
FirmwareVolume.UnDispatchedFfsDict is mutated during iteration,
convert the FirmwareVolume.UnDispatchedFfsDict.keys() to a new list
to resolve this problem.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The Eot will report error when python3 enabled.
We replaced sdict with collections.OrderedDict in python3
patch set, but the sdict implement "append" method which is not
implemented in collections.OrderedDict.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Minor updates to comments and typo fixes. Also removed
unused structure CM_ARM_CPU_INFO_LIST.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
According to ACPI 6.2 Specification - Errata A, 'One,
and only one, GIC distributor structure must be present
in the MADT for an ARM based system'. Therefore,
the GIC Distributor ID field in the ACPI MADT GICD
substructure can be set to zero and there is no need
for the Configuration Manager to provide this information.
Update the CM_ARM_GICD_INFO structure to remove the GicId
field. Similarly update the MADT Generator to set the GicId
field in the GICD substructure to zero.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2_DEBUG_PORT_DDI() macro supports adding only one
Generic Base Address Register. Therefore, removed the
superfluous parameter NumReg and updated the macro to
use DBG2_NUMBER_OF_GENERIC_ADDRESS_REGISTERS which has
a value 1.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Added option for OEMs to provide OEM Table ID and
OEM Revision for ACPI tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Renamed the enum EArmObjIdMapping to EArmObjIdMappingArray
and updated the IORT generator accordingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Updated the Protocols section to reflect the protocols
that are produced or consumed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Add support for 16550 UART to ACPI SPCR table as it is a
supported UART type by HLOS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The EFI_RETURN_STATUS_EXTENDED_DATA feature from PI-1.7
(<https://mantis.uefi.org/mantis/view.php?id=1885>) enables platform code
to learn about boot option failures (loading and launching) via status
codes reported by the UEFI Boot Manager.
In commit 59541d4163, we removed all status code support from
ArmVirtPkg. Reenable that support now, minimally, just to the extent so we
can benefit from the PI-1.7 feature mentioned above:
(1) Include the ReportStatusCodeRouterRuntimeDxe driver.
This driver produces two protocols, EFI_STATUS_CODE_PROTOCOL and
EFI_RSC_HANDLER_PROTOCOL. The former allows DXE phase modules and
runtime modules to report (produce) status codes. The latter allows
the same types of modules to register callbacks for status code
handling (consumption).
(Handler registration occurs only at boot time. Status codes are
delivered to each handler at runtime as well, unless the handler is
unregistered at ExitBootServices().)
(2) Resolve ReportStatusCodeLib to a non-Null instance, for DXE_DRIVER
modules only. This way DXE_DRIVER modules that use the
REPORT_STATUS_CODE_EX() macro and friends will reach
EFI_STATUS_CODE_PROTOCOL from point (1).
(3) Set PcdReportStatusCodePropertyMask to 3 (the default value is 0).
This causes the REPORT_STATUS_CODE_EX() macro and friends to let
Progress Codes (bit#0) and Error Codes (bit#1) through to point (1).
Debug Codes (bit#2) are filtered out.
(4) Include no driver, for now, that registers any status code handler via
EFI_RSC_HANDLER_PROTOCOL, from point (1). Status codes that reach
ReportStatusCodeRouterRuntimeDxe will be thrown away.
(5) Modify only the ArmVirtQemu* platforms. A status code handler will
be added to "ArmVirtPkg/Library/PlatformBootManagerLib" in the next patch,
and this library instance is not consumed by ArmVirtXen.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Introduce the Platform Boot Manager Print Status Code Library (for short,
PlatformBmPrintScLib) class for catching and printing the LoadImage() /
StartImage() preparations, and return statuses, that are reported by
UefiBootManagerLib.
In the primary library instance, catch only such status codes that
UefiBootManagerLib reports from the same module that contains
PlatformBmPrintScLib. The intent is to establish a reporting-printing
channel within BdsDxe, between UefiBootManagerLib and
PlatformBmPrintScLib. Ignore status codes originating elsewhence, e.g.
from UiApp's copy of UefiBootManagerLib.
Cc: Anthony Perard <anthony.perard@citrix.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Julien Grall <julien.grall@linaro.org>
Cc: Ray Ni <ray.ni@intel.com>
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1515418
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
In the EFI_RETURN_STATUS_EXTENDED_DATA structure from PI-1.7, there may be
padding between the DataHeader and ReturnStatus members. The
REPORT_STATUS_CODE_EX() macro starts populating the structure immediately
after DataHeader, therefore the source data must provide for the padding.
Extract the BmReportLoadFailure() function from EfiBootManagerBoot(),
prepare a zero padding (if any) in a temporary
EFI_RETURN_STATUS_EXTENDED_DATA object, and fix the
REPORT_STATUS_CODE_EX() macro invocation.
Cc: Dandan Bi <dandan.bi@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Star Zeng <star.zeng@intel.com>
Bugzilla: https://bugzilla.tianocore.org/show_bug.cgi?id=1539
Fixes: c2cf8720a5
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1474
Within UfsBlockIoPei, the current implementation of the Block IO(2)
services:
UfsBlockIoPeimGetMediaInfo
UfsBlockIoPeimReadBlocks
UfsBlockIoPeimGetMediaInfo2
UfsBlockIoPeimReadBlocks2
does not handle the input parameter 'DeviceIndex' properly.
According to both of the PI spec and the function description comments:
> DeviceIndex Specifies the block device to which the function wants
> to talk. ... This index is a number from one to
> NumberBlockDevices.
But current codes incorrectly treat the valid range of 'DeviceIndex' as 0
to (NumberBlockDevices - 1).
This commit is to address this issue.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
If the input parameter AsciiString length is greater
than 255, the GenFv will hang.
This patch is to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If the WORKSPACE environment variable has been set,The variables that
control stable sorting will not be set.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
When define [DEPEX] in lib inf to build, it will fail and report"
gUefiOvmfPkgTokenSpaceGuid.test1 used in [Depex] section should be
used as FixedAtBuild type and VOID* datum type in the module."
But we define this PCD to FixedAtBuild type and VOID* datum type indeed.
DEC:
[PcdsFixedAtBuild]
gUefiOvmfPkgTokenSpaceGuid.test1 |
{GUID("4096267b-da0a-42eb-b5eb-fef31d207cb4")}|VOID*|0x3c
DSC:
add pcd under lib inf as below:
NULL|TestPkg/TestLib/TestLib.inf
<PcdsFixedAtBuild>
gUefiOvmfPkgTokenSpaceGuid.test1 | {GUID(gUefiOvmfPkgTokenSpaceGuid)}
Lib inf:(TestPkg/TestLib/TestLib.inf)
[Depex]
gUefiOvmfPkgTokenSpaceGuid.test1
[FixedPcd]
gUefiOvmfPkgTokenSpaceGuid.test1
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1544
1) The GenC tool does not include the constructor/destructor for
USER_DEFINED module. It should be included.
Only constructor/destructor with BASE type is included here.
The constructor/destructor with PEI/DXE/SMM type is still excluded
to keep original behavior.
2) The GenC tool includes the UnloadImage code for BASE module.
It should NOT be included.
3) The GenC tool uses EFI_STATUS and ASSERT_EFI_ERROR for BASE type.
It should use RETURN_STATUS and ASSERT_RETURN_ERROR.
4) The GenC tool miss DebugLib.h for BASE or USER_DEFINED module
AutoGen.c. Only Base.h is there. It should add Library/DebugLib.h.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1529
This commit will add the 'Security feature set' support for ATA devices.
According to the AT Attachment 8 - ATA/ATAPI Command Set (ATA8-ACS)
specification, the Security feature set is an optional feature. In
summary, the feature is a password system that restricts access to user
data stored on an ATA device. A more detailed introduction of this feature
can be referred from the ATA8-ACS spec.
The HddPassword driver is composed of 2 parts:
* A DXE driver and
* A PEI driver
The DXE driver consumes EFI_ATA_PASS_THRU_PROTOCOL instances and installs
an HII GUI to manage the devices. If the managing device supports Security
feature set, the HII page will provide the user with the ability to
set/update/disable the password for this device. Also, if a password is
being set via the Security feature set, a popup window will show during
boot requesting the user to input password.
Another feature supported by this driver is that for those managing
devices with password set, they will be automatically unlocked during the
S3 resume. This is done by the co-work of the DXE driver and the PEI
driver:
The DXE driver will save the password and the identification information
for these devices into a LockBox, which is only allowed to restore during
S3 resume.
The PEI driver, during S3 resume, will restore the content in the LockBox
and will consume EDKII_PEI_ATA_PASS_THRU_PPI instances to unlock devices.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the current implementation of OpalPassword drivers, it has a feature
to support devices being automatically unlocked in the S3 resume. For this
feature, two types of devices are supported:
* ATA hard disks working under AHCI mode
* NVM Express devices
The support of this feature requires the above 2 types of device to be
initialized at the PEI phase during S3 resume, which is done by the
co-work of the OpalPasswordDxe driver and the OpalPasswordPei driver.
More specifically, the OpalPasswordDxe will handle:
* Pre-allocate MMIO resource and save it in a driver internal LockBox for
OpalPasswordPei to retrieve;
* Save the PCI configuration space of ATA controllers into boot script.
Meanwhile, the OpalPasswordPei will handle:
* Rely on the boot script for the PCI configuration space program of ATA
controllers;
* Restore the driver internal LockBox to get the MMIO resource;
* Complete the PCI configuration space program for ATA and NVME
controllers;
* Initialize ATA and NVME controllers and devices.
This commit will remove these hardware initialization related codes from
the OpalPassword drivers. The hardware initialization will be covered by
PEI storage device drivers (e.g. NvmExpressPei & AhciPei in the
MdeModulePkg).
After such codes removal, the OpalPasswordDxe will only handle:
* Construct/update the S3StorageDeviceInitList LockBox with the managing
ATA and NVME devices.
And the OpalPasswordPei will only handle:
* Locate Storage Security Command PPI instances to perform the device
automatic unlock during the S3 resume.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
The previous commit:
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
adds the support to enlarge a LockBox when using the LockBoxLib API
UpdateLockBox().
This commit is to sync the API description comment of UpdateLockBox() with
its counterparts in MdeModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. It is a refinement for the
PEI library instance within SmmLockBoxLib.
For the below ASSERT statement within function RestoreLockBox():
Status = SmmCommunicationPpi->Communicate (
SmmCommunicationPpi,
&CommBuffer[0],
&CommSize
);
if (Status == EFI_NOT_STARTED) {
//
// Pei SMM communication not ready yet, so we access SMRAM directly
//
DEBUG ((DEBUG_INFO, "SmmLockBoxPeiLib Communicate - (%r)\n", Status));
Status = InternalRestoreLockBoxFromSmram (Guid, Buffer, Length);
LockBoxParameterRestore->Header.ReturnStatus = (UINT64)Status;
if (Length != NULL) {
LockBoxParameterRestore->Length = (UINT64)*Length;
}
}
ASSERT_EFI_ERROR (Status);
It is possible for previous codes to return an error status that is
possible for happen. One example is that, when the 'if' statement
'if (Status == EFI_NOT_STARTED) {' is entered, function
InternalRestoreLockBoxFromSmram() is possible to return 'BUFFER_TOO_SMALL'
if the caller of RestoreLockBox() provides a buffer that is too small to
hold the content of LockBox.
Thus, this commit will remove the ASSERT here.
Please note that the current implementation of RestoreLockBox() is
handling the above-mentioned error case properly, so no additional error
handling codes are needed here.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
This commit is out of the scope for BZ-1409. It is a coding style
refinement for the SmmLockBoxLib.
More specifically, the commit will remove all the debug message display
level macros starting with 'EFI_D_' and replace them with macros starting
with 'DEBUG_'.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the AHCI mode ATA device support in the PEI phase.
More specifically, the newly add AhciPei driver will consume the ATA AHCI
host controller PPI for ATA controllers working under AHCI code within the
system. And then produces the below PPIs for each controller:
EDKII PEI ATA PassThru PPI
Storage Security Command PPI
Also, the driver will consume the S3StorageDeviceInitList LockBox in S3
phase. The purpose is to perform an on-demand (partial) ATA device
enumeration/initialization on each controller to benefit the S3 resume
performance.
The implementation of this driver is currently based on the below
specifications:
Serial ATA Revision 2.6
Serial ATA Advanced Host Controller Interface (AHCI) 1.3.1
AT Attachment with Packet Interface - 6 (ATA/ATAPI-6)
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
For the NvmExpressPei driver, this commit will update the driver to
consume the S3StorageDeviceInitList LockBox in S3 phase. The purpose is to
perform an on-demand (partial) NVM Express device
enumeration/initialization to benefit the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
This commit is out of the scope for BZ-1409. The commit will remove the
call of RegisterForShadow() at the entry point of the driver. By doing so,
the driver is now possible to be executed without being re-loaded into
permanent memory.
Thus, this commit will update the NvmExpressPei driver to avoid updating
the content of a global variable.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the GUID definitions for LockBox which is used to
save a list of storage devices that need to get initialized during the S3
resume.
The content of the LockBox will be a DevicePath structure that contains
zero or more DevicePath instances. Each instance denotes a storage device
that needs to get initialized during the S3 resume.
The producers of the content of this LockBox will be drivers like
OpalPassword DXE driver. This kind of drivers requires some specific
storage devices to be initialized during the PEI phase of in S3 resume.
(For the OpalPassword case, it requires the managing devices to be
automatically unlocked during the S3 resume).
The attribute of the LockBox should be set to
LOCK_BOX_ATTRIBUTE_RESTORE_IN_S3_ONLY.
The consumers of the content of this LockBox will be PEI storage device
controller/bus drivers (e.g. NvmExpressPei) during S3 resume. This kind of
drivers can use the DevicePath instances stored in the LockBox to get a
list of devices that need to get initialized. In such way, an on-demand
(partial) device enumeration/initialization can be performed to benefit
the S3 resume performance.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@Intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for Storage Security Command (SSC)
PPI. This PPI will be be used to abstract mass storage devices to allow
code running in the PEI phase to send security protocol commands to mass
storage devices without specific knowledge of the type of device or
controller that manages the device.
More specifically, the PPI will provide services to:
* Get the number of mass storage devices managed by a instance of the SSC
PPI (by service 'GetNumberofDevices');
* Get the identification information (DevicePath) of a managing mass
storage devices (by service 'GetDevicePath');
* Send security protocol commands to mass storage devices (by services
'ReceiveData' and 'SendData').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for EDKII PEI ATA PassThru PPI. This
PPI will provide services that allow ATA commands to be sent to ATA
devices attached to an ATA controller in the PEI phase.
More specifically, the PPI will provide services to:
* Send ATA commands to an ATA device (by service 'PassThru');
* Get the list of the attached ATA device on a controller (by services
'GetNextPort' and 'GetNextDevice');
* Get the identification information (DevicePath) of the underlying ATA
host controller (by service 'GetDevicePath').
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1409
This commit will add the definitions for ATA AHCI host controller PPI. The
purpose of the PPI in to provide:
* MMIO base address
* Controller identification information (DevicePath)
for ATA host controllers working under AHCI mode.
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
I don't watch much my Linaro e-mail anymore. So update my e-mail address
from Linaro to the Arm one.
Contributed-under: Tianocore Contribution Agreement 1.1
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1020
The following Microcode payload format is define in SDM spec.
Payload: |MicrocodeHeader|MicrocodeBinary|ExtendedHeader|ExtendedTable|.
When we verify the CheckSum32 with ExtendedTable, we should use the fields
of ExtendedTable to replace corresponding fields in MicrocodeHeader,
and then calculate the CheckSum32 with MicrocodeHeader+MicrocodeBinary.
This patch already verified on ICL platform.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1511
Currently the TCG config setup form defaults the physical presence action to
PHYSICAL_PRESENCE_ENABLE, this prevents the action from being called. When a TPM
1.2 device is in Disabled and Activated state it is not possible to issue the
PHYSICAL_PRESENCE_ENABLE using the menu action.
By having the form default to PHYSICAL_PRESENCE_NO_ACTION, the user is now able
to select PHYSICAL_PRESENCE_ENABLE and toggle the TPM 1.2 device enable state.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Rodrigo Gonzalez del Cueto <rodrigo.gonzalez.del.cueto@intel.com>
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1520
To save the image size without the compression, more than
one drivers can be combined into single one. When more than
one drivers are combined, their depex will be AND together.
Below is the example to combine BootManagerPolicyDxe into
DriverHealthManagerDxe.
Besides this patch, BaseTools also needs to check the module
type and make sure all module type are same. Otherwise,
BaseTools will report the error.
DRIVER INF has the parameter ENTRY_POINT
LIBRARY INF has the parameter LIBRARY_CLASS
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
externals.txt is to refer to the binary Win32. It is not used any longer.
BuildNotes.txt is to freeze BaseTools python. It is not used any longer.
BinaryFiles.txt is to list the file in Bin directory. But, Bin dir is empty.
building-gcc.txt and gcc is for mingw-gcc. It is not used any longer.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1533
When SecCore and PeiCore in different FV, current
implementation still assuming SecCore and PeiCore are in
the same FV.
To fix this issue 2 FVs will be input parameters for
FindAndReportEntryPoints () and SecCore and PeiCore will
be found in each FV and correct debug information will
be reported.
Test: Booted with internal platform successfully.
Cc: Eric Dong <eric.dong@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1537
Use 16-bit and 32-bit IO widths for SDMMC MMIO to prevent all register
accesses from being split up into 8-bit accesses.
The SDHCI specification states that the registers shall be accessible in
byte, word, and double word accesses. (SD Host Controller Simplified
Specification 4.20 Section 1.2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1140
In eMMC HS400 switch sequence flow eMMC driver attempted
to execute SEND_STATUS just after switching bus timing to high
speed and before downgrading clock frequency to 52MHz. Since link
was at that time in incorrect state SEND_STATUS was failing which
made driver think switch to HS400 failed.
This change makes driver always change clock frequency after
switching bus timing and before executing SEND_STATUS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Albecki Mateusz <mateusz.albecki@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
For example, PCD gUefiOvmfPkgTokenSpaceGuid.Test001 datatype is Array:
TEST1[2]
and the filed TEST1UINT64ARRAY in TEST1 is also an array:
UINT64 TEST1UINT64ARRAY[2];
Then the following filed assignment in DSC will cause build failure.
gUefiOvmfPkgTokenSpaceGuid.Test001[0].TEST1UINT64ARRAY|{'A','B'}
The root cause is build tool generate incorrect PcdValueInit.c File.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
If there are multiple sku used in a platform and
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer PCD
is used, build will fail.
This is a regression issue introduced by the commit:
5695877ec8 which only update the
Vpd offset for default SKU but not other SKUs.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In ParseDevPathValue, the binary data need to convert to string
for python3 and python2 compatiblity.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
MaxSizeUserSet is missing in Pcd deepcopy function.
This patch is to add it back to Pcd deepcopy function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The IORT generator uses the configuration manager protocol
to obtain information about the PCI Root Complex, SMMU,
GIC ITS, Performance Monitoring counters etc. and generates
the IORT table.
The mappings between the components are represented using
tokens. The generator invokes the configuration manager
protocol interfaces and requests for objects referenced by
tokens to establish the link.
This table data is then used by the Table Manager to install
the IORT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the IORT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MCFG generator uses the configuration manager protocol
to obtain the PCI Configuration space information from the
platform configuration manager and builds the MCFG table.
This table data is then used by the Table Manager to install
the MCFG table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MCFG table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The DBG2 generator uses the configuration manager protocol
to obtain the debug serial port information from the platform
configuration manager. It then updates a template DBG2 table
structure. This table data is used by the Table Manager to
install the DBG2 table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The SPCR generator uses the configuration manager protocol to
obtain the serial port information from the platform configuration
manager. It then updates a template SPCR table structure. This
table data is used by the Table Manager to install the SPCR table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The GTDT generator uses the configuration manager protocol to
obtain information about the architectural and platform timers
available on the platform and generates the ACPI GTDT table.
This table data is then used by the Table Manager to install
the GTDT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the GTDT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The MADT generator uses the configuration manager protocol to
obtain information about the Arm interrupt controllers (GICC,
GICD, etc.) and generates the ACPI MADT table. This table data
is then used by the Table Manager to install the MADT table.
The Table Manager then invokes the generator interface to free
any resources allocated by the MADT table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The FADT generator collates the relevant information required
for generating a FADT table from configuration manager using
the configuration manager protocol. It then updates a template
FADT table structure. This table data is used by the Table
Manager to install the FADT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Raw generator is a simple generator. This generator provides
the ability to install a binary blob (that contains ACPI table
data) as an ACPI table. The binary blob could be pre-generated
ACPI table data or it may be the pre-compiled output from an
iAsl compiler for a DSDT or SSDT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table manager implements the top level component
that drives the table generation and installation process.
It uses the configuration manager protocol to get the list
of tables to be installed from the configuration manager.
It iterates through the list of tables, requests the table
factories for corresponding generators and invokes the
generator interface to build the tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic table factory dxe implements the dynamic table
factory protocol. It also implements the ACPI, SMBIOS and
DT table factories. The table generators register themselves
with the respective table factories and the factories are
responsible for instantiating instances of the generators
to build the firmware tables.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the dynamic table factory protocol
that provides an interface to register and retrieve
registered generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A helper library that implements common functionality
for use by table generators.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch defines a helper macro 'GET_OBJECT_LIST()' that
expands to a function that uses the configuration manager
protocol to retrieve configuration manager object(s).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
Introduce configuration manager protocol interface
that is used by the dynamic tables framework core
to communicate with configuration manager.
Configuration manager is a platform specific module
that implements the configuration manager protocol.
Table generators use this interface to retrieve the
hardware information from the configuration manager.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
The configuration manager objects provides a convenient
way for wrapping up the namespaces using a well defined
configuration manager object Id.
The configuration manager is a platform specific component
that collates the platform information required for generating
firmware tables and represents them as configuration manager
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for the Arm namespace
objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables frameworks core communicates with the
platform specific implementation using the configuration
manager protocol interface. The dynamic tables framework
core uses this interface to retrieve information required
for generating the firmware tables. This information is
represented in the form of objects, which are classified
as standard namespace objects, Arm namespace objects or
as Custom/OEM namespace objects.
This patch introduces the definitions for standard
namespace objects.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the interfaces and definitions for
implementing a Device Tree table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing a SMBIOS table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
This patch introduces the required interfaces and definitions
for implementing an ACPI table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
A Table generator is a component that implements the logic
for building a firmware table. This is typically implemented
as a library and registers itself with a table factory.
Table generators are further classified based on type of table
it generates, a namespace that signifies if the implementation
is standard or an OEM specific implementation and a table Id.
This patch introduces the definitions used for describing a
table generator.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The dynamic tables framework is designed to generate standardised
firmware tables that describe the hardware information at
run-time. A goal of standardised firmware is to have a common
firmware for a platform capable of booting both Windows and Linux
operating systems.
Traditionally the firmware tables are handcrafted using ACPI
Source Language (ASL), Table Definition Language (TDL) and
C-code. This approach can be error prone and involves time
consuming debugging.
In addition, it may be desirable to configure platform hardware
at runtime such as: configuring the number of cores available
for use by the OS, or turning SoC features ON or OFF.
This patch introduces Dynamic Tables Framework which also provides
mechanisms to reduce the amount of effort required in porting
firmware to new platforms. A more detailed description is in
the Readme.md file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Alexei Fedorov <alexei.fedorov@arm.com>
The check for 1.[1-9][0-9].* was removed since qemu jumped to 2.0
after 1.7.
Changed 2.*.* to [2-9].*.* to match major releases 3 - 9.
Added [1-9][0-9]*.*.* to match major releses >= 10.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1481
Today's MtrrLib contains a bug, for example:
when the original cache setting is WB for [0xF_0000, 0xF_8000) and,
a new request to set [0xF_0000, 0xF_4000) to WP,
the cache setting for [0xF_4000, 0xF_8000) is reset to UC.
The reason is when MtrrLibSetBelow1MBMemoryAttribute() is called the
WorkingFixedSettings doesn't contain the actual MSR value stored in
hardware, but when writing the fixed MTRRs, the code logic assumes
WorkingFixedSettings contains the actual MSR value.
The new fix is to change MtrrLibSetBelow1MBMemoryAttribute() to
calculate the correct ClearMasks[] and OrMasks[], and use them
directly when writing the fixed MTRRs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1114
V2: simplify the code logic.
update
if (!mHaveExitedBootServices &&
(StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer)) {
gBS->FreePool (StatusCodeData);
}
to
if (StatusCodeData != (EFI_STATUS_CODE_DATA *) StatusCodeBuffer) {
gBS->FreePool (StatusCodeData);
}
V3:
And the code below into the else condition (stack buffer is not enough)
in /DxeReportStatusCodeLib/ReportStatusCodeLib.c
if (gBS == NULL || gBS->AllocatePool == NULL || gBS->FreePool == NULL) {
return EFI_UNSUPPORTED;
}
V4:
Refine code logic.
When report status code with ExtendedData data,
and the extended data can fit in the local static buffer,
there is no need to use AllocatePool to hold the ExtendedData data.
This patch is just to do the enhancement to avoid using AllocatePool.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Michael Turner <Michael.Turner@microsoft.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
If use a structure pcd in fdf, build tool crash
This is a regression issue introduced by py3 patch set.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Generate report fail when -Y EXECUTION_ORDER in build command.
This patch is going to fix this issue.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This is designed to be used on platforms where a a real RTC is not
available and relies on an RtcEpochSeconds variable having been set or,
if that is not the case, falls back to using the epoch embedded at
compilation time.
Note that, in order to keep things simple for the setting of the
compilation time variable, only GCC environments with UNIX-like shells
and where a 'date' command is available are meant to be supported for
now.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1505
When a device under PPB contains option ROM but doesn't require 32bit
MMIO, ProgrameUpstreamBridgeForRom() cannot correctly restore the
PPB MEM32 RANGE BAR. It causes the 32bit MMIO conflict which may
cause system hangs in boot.
The root cause is when ProgrameUpstreamBridgeForRom() calls
ProgramPpbApperture() to restore the PPB MEM32 RANGE BAR, the
ProgramPpbApperture() skips to program the BAR when the resource
length is 0.
This patch fixes this issue by not calling ProgramPpbApperture().
Instead, it directly programs the PPB MEM32 RANGE BAR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
Per PCI Spec, the option ROM BAR is 32bit so the maximum option ROM
size can be hold by UINT32 type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ray Ni <ray.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
This issue is caused by FileInfoBuffer variable. This is a pointer array
and each elements also pointer to a memory buffer that is allocated and
returned by AllocateCopyPool function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-1}
(6 builds in total), PcdOptionRomImageVerificationPolicy,
PcdFixedMediaImageVerificationPolicy, and
PcdRemovableMediaImageVerificationPolicy are not used in any of those
builds.
Restrict the settings to the ArmVirtQemu and ArmVirtQemuKernel platforms
(preserving the -D SECURE_BOOT_ENABLE restriction in the process).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Restrict the setting to the ArmVirtQemu and ArmVirtQemuKernel platforms.
Restrict the TTY_TERMINAL define similarly.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Xen} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Restrict
the PCD setting to ($(TARGET) != RELEASE).
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {Qemu,QemuKernel,Xen} x {RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds.
Rather than just restrict the PCD setting to ($(TARGET) != RELEASE),
remove the setting completely. The current value is identical to the 0xAF
default in "MdePkg/MdePkg.dec", which recognizes Andrew Fish, and so it's
unlikely to ever change.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The PcdCoreCount dependency in the "ArmVirtPrePiUniCoreRelocatable.inf"
file is false; the module doesn't consume the PCD. Clean up the INF.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds.
Move the setting from "ArmVirt.dsc.inc" to "ArmVirtQemu.dsc", to reflect
reality.
We originally moved the PCD setting in the opposite direction in commit
8aab575c26 ("ArmVirtPkg: enable non-executable DXE stack for all
platforms", 2017-03-07), generalizing it. However, as the comment itself
states, and according to all 36 ArmVirt build reports:
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
the PCD is only consumed by "MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf", and
that module is only included in the ArmVirtQemu platform.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(24 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x
{Qemu,QemuKernel,Xen} x
{DEBUG,NOOPT,RELEASE} x
{feat-0,feat-1}
(36 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
According to the
PCDs not used by modules or in conditional directives
sections of all the build reports for
{AARCH64,ARM} x {QemuKernel} x {DEBUG,NOOPT,RELEASE} x {feat-0,feat-1}
(12 builds in total), the PCD is not used in any of those builds. Remove
the setting.
("feat-1" stands for "-D HTTP_BOOT_ENABLE -D NETWORK_IP6_ENABLE -D
SECURE_BOOT_ENABLE -D TTY_TERMINAL", while "feat-0" stands for "".)
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1408
According to the information of the above BZ-1408 and other platform
owners, NVM Express devices are becoming more likely to be a critical
part during the boot process.
This commit will add the calls to 'REPORT_STATUS_CODE' when there is a
failure happens during the NVM Express controller/device initialization
process.
Cc: Sean Brogan <sean.brogan@microsoft.com>
Cc: Bret Barkelew <brbarkel@microsoft.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Replace the dummy C implementation of SpeculationBarrier() with
implementations consisting of the recommended DSB SY + ISB sequence,
as recommended by ARM in the whitepaper "Cache Speculation Side-channels"
version 2.4, dated October 2018.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Fix various typos in CorebootModulePkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
Fix various typos in CorebootPayloadPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Coeur <coeur@gmx.fr>
Reviewed-by: Benjamin You <benjamin.you@intel.com>
This patch adds the TCG2 Configuration menu to the Device Manager
menu. We can apparently reuse the sample Tcg2ConfigDxe from
SecurityPkg/Tcg/Tcg2Config without obvious adverse effects. The
added TCG2 Configuration menu now shows details about the attached
TPM 2.0 and lets one for example configure the active PCR banks
or issue commands, among other things.
The code is added to Ovmf by building with -DTPM2_ENABLE and
-DTPM2_CONFIG_ENABLE.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
With Python3, the dict.value() method returns an iterator.
If a dictionary is updated while an iterator on its keys is used,
a RuntimeError is generated.
Converting the iterator to a list() forces a copy of the mutable
keys in an immutable list which can be safely iterated.
Commit f8d11e5a4a converted various uses but missed one:
When specifying multiple BUILDTARGET, the first target builds
successfully, but then the PGen.BuildDatabase._CACHE_ dictionary is
updated, and accessing the next target triggers a RuntimeError.
Convert this iterator to an immutable list, to solve this build error:
$ build -a IA32 -t GCC5 -b RELEASE -b NOOPT -p OvmfPkg/OvmfPkgIa32.dsc
[...]
Processing meta-data ...
build.py...
: error C0DE: Unknown fatal error when processing [OvmfPkg/OvmfPkgIa32.dsc]
(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)
(Python 3.5.3 on linux) Traceback (most recent call last):
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2387, in Main
MyBuild.Launch()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 2141, in Launch
self._MultiThreadBuildPlatform()
File "BaseTools/BinWrappers/PosixLike/../../Source/Python/build/build.py", line 1921, in _MultiThreadBuildPlatform
self.Progress
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 304, in __init__
self._InitWorker(Workspace, MetaFile, Target, Toolchain, Arch, *args, **kwargs)
File "BaseTools/Source/Python/AutoGen/AutoGen.py", line 477, in _InitWorker
for BuildData in PGen.BuildDatabase._CACHE_.values():
RuntimeError: dictionary changed size during iteration
Note: The culprit commit (f8d11e5a4a) can not be found with bisection.
In 9c2d68c0a2 the build tools default to the python version provided
by the ${PYTHON} environment variable, however the Python3 transition is
not functional before d943b0c339. f8d11e5a4a falls between the
previous two.
Reported-by: Leif Lindholm <leif.lindholm@linaro.org>
Fixes: f8d11e5a4a
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Philippe Mathieu-Daude <philmd@redhat.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
The goal of commit 97c8f5b9e7 ("BaseTools:StructurePCD value display
incorrect in "Not used" section.", 2019-02-02) was to display the full
contents of such structure PCDs in the build report that were set in the
platform DSC or the FDF, but not used in any module INFs. The listings
would appear in the
PCDs not used by modules or in conditional directives
section of the build report.
Commit 97c8f5b9e7 assumed that any (platform, architecture) combination
would have a (possibly empty) set of structure PCD (and so the set of the
structure PCDs could be filtered for set-but-unused ones).
This is not the case: in "DscBuildData.py", in method
UpdateStructuredPcds(), if "S_pcd_set" remains an empty OrderedDict(),
then it is not added to "GlobalData.gStructurePcd" *at all*, for the
current (platform, architecture) combination.
As a result, when the PCD report tries to fetch the set of structure PCDs
for the current (platform, architecture), "GlobalData.gStructurePcd" does
not return an empty OrderedDict(); instead, it raises a KeyError. Fix it
by defaulting to an empty OrderedDict(), with the get() method.
Reported-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1513
Fixes: 97c8f5b9e7
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
This package is used by several platforms in edk2-platforms, so ensure it
can be built directly by adding AARCH64/ARM to SUPPORTED_ARCHITECTURES.
Also force-include CompilerIntrinsicsLib, BaseStackCheckLib and create a
resolution for ArmSoftFloatLib for ARM.
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
The CompilerIntrinsicsLib and BaseStackCheckLib need to be included in
order for an ARM build of the package .dsc to succeed - so add them.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: jiewen.yao@intel.com
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added - so do that.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
Contrary to what the name suggests, some modules in this package are used
on other architecture. ARM is already listed in SUPPORTED_ARCHITECTURES
in the .dsc, but AARCH64 was never added.
Add that, and force inclusion of CompilerIntrinsicsLib and
BaseStackCheckLib for AARCH64/ARM to make the build successful.
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The WebServer application is not meant to be Ia32/X64 specific, and would
build for other architectures, if it wasn't for the
#include <Register/Msr.h>
in WebServer.h. Move that statement to Mtrr.c instead, which is the only
consumer, and is already being filtered out for other architectures.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
To avoid potential NULL pointer dereference issue. Initialize them at
the beginning of the function.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Uninitialized pointer variable may randomly point to a block of memory.
In This case, FreePool function will free a block of memory that is not
belongs to this function.
Cc: Ruiyu Ni <ray.ni@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
StructurePCD value display incorrect in "Not used" section,
that the value defined in structure does not show.
StructurePCD will not display in "Not Used" section if
main structure not define in dsc and pcd not in inf
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Add a new type of exception for function body checkpoint.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hess Chen <hess.chen@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Defined 2 PCDs(Test4 & Test401) and 2 SKUs(DEFAULT & _),
then set "SKUID_Defines" to ALL, for FixedAtBuild
gEfiStructuredPcdPkgTokenSpaceGuid. Test401 in this case,
its value should get from "Default" SKU, not from "_" SKU,
but we does not set value in SKU "_" in dsc, so Test401
should only display the value get from dec.
Missing the map() function causes SKU specific items to
not be deleted
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Update header file function name for FfsFindFileByName to match
implementation function name.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
Eot tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
v2:
The python files under CParser4 are generated by antlr4 and for
python3 usage. They have python3 specific syntax, for example
the data type declaration for the arguments of a function. That
is not compitable with python2. this patch is to remove these syntax.
ECC tool Python3 adaption.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1493
Pkcs7GetAttachedContent() implementation in current CryptPkcs7Verify.c
is actually shared by RuntimeCryptLib.inf, SmmCryptLib.inf and
BaseCryptLib.inf, which are not correct since there's no use scenario
for runtime and AllocatePool() used in this method can only be called
in boot time.
This patch fix this issue by splitting file CryptPkcs7Verify.c into 3 parts.
CryptPkcs7VerifyCommon.c (shared among Base, SMM, Runtime)
CryptPkcs7VerifyBase.c (shared between Base, SMM)
CryptPkcs7VerifyRuntime.c (for Runtime only)
CryptPkcs7VerifyBase.c will have original implementation of
Pkcs7GetAttachedContent() as CryptPkcs7Verify.c. CryptPkcs7VerifyRuntime.c
provide a NULL version of Pkcs7GetAttachedContent().
No functionality and interface change is involved in this patch.
Cc: Ting Ye <ting.ye@intel.com>
Cc: Qin Long <qin.long@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Ting Ye <ting.ye@intel.com>
Introduce two public functions CharToUpper and AsciiCharToUpper.
They have the same functions as InternalCharToUpper and
InternalBaseLibAsciiToUpper.Considering the internal functions will
be removed,so directly I change their function names to the public ones'.
https://bugzilla.tianocore.org/show_bug.cgi?id=1369
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Shenglei Zhang <shenglei.zhang@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1482
CapsuleApp is used for trigger capsule update.
Add -OD option in CapsuleApp to support doing capsule update via storage.
Add -F and -L options to support dumping information feature.
Finish unit test for -F and -L options.
Already verify this feature on Denlow platform, success to update capsule
via hard disk with -OD option.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
In some cases, such as MD RAID1 in Linux, the bootloader may be in a
nested EFI system partition partition. For example, sda1 and sdb1 are
combined as md0 and the first partition of md0, md0p1, is an EFI system
partition. Then, the bootloader can be located by the following device
paths:
PCI()/SATA(sda)/Partition(sda1)/Partition(md0p1)/File(bootloader.efi)
PCI()/SATA(sdb)/Partition(sdb1)/Partition(md0p1)/File(bootloader.efi)
To make the boot option more resilient, we may create a boot option with
the short-form device path like "Partition(md0p1)/File(bootloader.efi)".
However, BmMatchPartitionDevicePathNode() only matched the first
partition node and ignored the nested partitions, so the firmware would
refuse to load bootloader.efi since "Partition(md0p1)" doesn't match
either "Partition(sda1)" or "Partition(sda2)".
This commit modifies BmMatchPartitionDevicePathNode() to iterate all
nested partitions so that the above boot option could work.
v2 - Simplify the node matching logic
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Gary Lin <glin@suse.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
Issue : SD read failure for high capacity cards e.g. 64 GB
Reason : Command argument value exceeds 32 bit for block number 0x3787FFF
and cant be fit into 32 bit wide SD host controller register.
Fix :
AccessMode bits [29:30] of OCR is a valid definition to calculate
data address for eMMC cards.
For SD cards, data address is calculated on the basis of
card capacity status bit[30] of OCR.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Currently, we always invalidate the TLBs entirely after making
any modification to the page tables. Now that we have introduced
strict memory permissions in quite a number of places, such
modifications occur much more often, and it is better for performance
to flush only those TLB entries that are actually affected by
the changes.
At the same time, relax some system wide data synchronization barriers
to non-shared. When running in UEFI, we don't share virtual address
translations with other masters, unless we are running under virt, but
in that case, the host will upgrade them as appropriate (by setting
an override at EL2)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1491
This patch is to update the data type of variable "Offset"
from UINT8 to UINT32 to fix following build issue.
...\Parsers\Pptt\PpttParser.c(193): error C2220:
warning treated as error - no 'object' file generated
...\Parsers\Pptt\PpttParser.c(193): warning C4244: '=':
conversion from 'UINT32' to 'UINT8', possible loss of data
Cc: Krzysztof Koch <krzysztof.koch@arm.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ray Ni <ray.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
ArmSetMemoryAttributes() still chokes in some cases, i.e., when the
length of the region exceeds 4 GB, the subtraction overflows, which
results in the region being misidentified as being 32-bit addressable.
Let's update the logic to trim the length to what we can address with
32 bits. This fixes the issue, and also deals with the issue where an
entire region is disregarded if part of it exceeds beyond what we can
map with 32 bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The newly added standalone MM versions of the FTW and variable runtime
drivers were included in MdeModulePkg.dsc to get test coverage when
building the package from its own .dsc, but the resulting modules are
non-functional since they incorporate some dummy libraries.
Dandan reports that these modules don't build cleanly when using the
EBC or XCODE5 compilers, so given the above, let's just ignore them
in this case.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Bi Dandan <dandan.bi@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1485
Current FSP utilizes pre-allocated temporary memory from
boot loader for both heap and stack. To reduce overall
temporary memory usage FSP may share the same stack with
boot loader and only needs a smaller memory for heap,
no separate memory required for stack.
Setting PcdFspHeapSizePercentage to 0 to enable FSP sharing
stack with boot loader, in this case boot loader stack
has to be large enough for FSP to use. Default is 50
(half memory heap and half memory stack) for backward
compatible with original model.
Test: Verified on internal platform and booting successfully
with both modes.
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Nate DeSimone <nathaniel.l.desimone@intel.com>
delete the shared global variable from Common.Misc
delete the uncalled users of the variable from build.build
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Refactor to 'dict' from 'IterableUserDict' which was only required for old
python interpreter.
Sort imports according to PEP8
Remove those we dont need.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Added the acpiview parser for the PPTT table.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Krzysztof Koch <krzysztof.koch@arm.com>
Reviewed-by: Sami Mujawar <sami.mujawar@arm.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
CacheOffset could be removed in UpdateVariable() after
//
// update the memory copy of Flash region.
//
CopyMem (
(UINT8 *)mNvVariableCache + CacheOffset,
(UINT8 *)NextVariable, VarSize
);
is moved to be before mVariableModuleGlobal->NonVolatileLastVariableOffset
value is updated, like right before
mVariableModuleGlobal->NonVolatileLastVariableOffset +=
HEADER_ALIGN (VarSize);
Except for the movement above, the patch also capitalizes the first
character of "update the memory copy of Flash region".
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1323
Merge EmuVariable and Real variable driver.
Add macro NV_STORAGE_VARIABLE_BASE.
Not get NV PCD in VariableWriteServiceInitialize, but in
FtwNotificationEvent/SmmFtwNotificationEvent, then
VariableWriteServiceInitialize could be not aware the NV
storage is real or emulated.
This patch prepares for adding emulated variable NV mode
support in VariableRuntimeDxe.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Julien Grall <julien.grall@arm.com>
ArmPkg/Include/IndustryStandard/ArmTrustZoneSmc.h contains definitions
contradicting the SMC Calling Convention (ARM DEN0028B).
It also has no users in public trees. So delete before it can cause
damage.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
TE images take up less space when using 4 KB section alignment, since
the FFS/FV generation code optimizes away the redundant, nested padding.
This saves 4 KB of space, which is a worthwhile improvement for code
that executes in place in secure context.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The dispatcher uses the PE/COFF loader to load images into the heap,
but only does so after copying the entire image first, leading to
two copies being made for no good reason.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
The special handling of the EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER
attribute is only necessary for images that are relocated twice, i.e.,
in the context of SetVirtualAddressMap (). This does not apply to
standalone MM modules, so drop the check.
Drop some redundant DEBUG output while at it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
ASSERT_EFI_ERROR (x) is a shorthand for ASSERT(!EFI_ERROR(x)), and so
it should only be used with EFI_STATUS type expressions.
So drop two instances that operate on other types, since neither looks
particularly useful.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Supreeth Venkatesh <supreeth.venkatesh@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Remove MM_STANDALONE from the list of permitted modules for this library.
It should only be used by the standalone MM core.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This MemoryAllocationLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- use correct MODULE_TYPE
- include MmServicesTableLib instead of declaring gMmst directly
- update code comments referring to the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
This HobLib code is based on the staging implementation of
StandaloneMmPkg, with the following changes:
- drop the unused AArch64/StandaloneMmCoreHobLibInternal.c source file
- remove hack from HobLibConstructor()
- update code comments referring the MM core
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Permit CheckUefiLib to be used by MM_STANDALONE modules. Since this
library has a constructor, change the library's module type into
BASE so its constructor prototype is compatible with MM_STANDALONE
as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Add MM_STANDALONE to the list of module types that are permitted to
link to this library. Also, since the constructor prototype is
different between MM_STANDALONE and DXE_DRIVER type libraries,
convert the library into BASE type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Jiewen Yao <jiewen.yao@intel.com>
Permit SmmCryptLib to be used by MM_STANDALONE modules
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Move PackRegistryFormatGuid logic from Common.Misc to this file.
There were no other consumers of the function.
As it is one line, just replace the logic without the separate function.
v2 - change to fix the import statement
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move SplitOption and ConvertStringToByteArray from
Common.Misc to this file.
There were no other consumers of the functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move IsFieldValuieAnArray from Common.Misc to this file.
There were no other consumers of the function.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move ProtocolValue and PpiValue from Common.Misc to this file.
There were no other consumers of these 2 functions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
In GenFds.py, Due to the second assignment, the value is wrong
Its value should a list, not a string.and this line is not required
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Move DataDump and DataRestore from Common.Misc to this file.
There were no other consumers of these 2 functions.
Import threading since that module is used in build.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
GenFdsCommand returned dictionary with elements that
are not compatible with GenFdsApi.
As a result the following options were not processed by GenFdsApi:
-v, -q, -d, --genfds-multi-thread, --ignore-sources
The issue is introduced by commit b3497bad12.
V2: Remove EFI_SOURCE references
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Felix Polyudov <felixp@ami.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Update _FixedPcdVoidTypeDict to FixedVoidTypePcds
'_FixedPcdVoidTypeDict' no longer exists because edk2 version (b23414f6).
'ModuleAutoGen' object has no attribute '_FixedPcdVoidTypeDict'.
Build fail when PCD use in the [DEPEX] section of INF files
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
When calculating the address of RelocBaseEnd,
the RelocBase address is ImageBase + RelocDir->VirtualAddress,
the size of RelocDir is RelocDir->Size.
So the RelocBaseEnd address is:
ImageBase + RelocDir->VirtualAddress + RelocDir->Size - 1
not
ImageBase + RelocDir->VirtualAddress + RelocDir->Size
This patch is to fix this issue when call PeCoffLoaderImageAddress
function to calculate the address of RelocBaseEnd.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Tested-by: Gary Lin <glin@suse.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1466
DEC file defines PCD default value and PCD supported type.
DSC can configure PCD type and value.
If the value is same to default value in DEC file,
DSC can only configure PCD type and leave empty for value.
This usage supports all type PCD except for DynamicHii type.
So, DynamicHii PCD should support this usage. Below is one example in DSC.
for example,
[PcdsDynamicHii.common.DEFAULT]
PcdPkgTokenSpaceGuid.PcdCName|L"VarName"|gVarGuid|0x00||NV,BS
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 31f5388006 ("ArmPkg/DefaultExceptionHandlerLib: use console
if available") added calls to AsciiPrint() to the default exception
handler code, but the ARM version did not include UefiLib.h yet
(even though the .INF declares it unconditionally), resulting in
build breakage. So add the missing include.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The library's MODULE_TYPE and the module type restrictions it
defines are needlessly strict. Just change the library to BASE
type and drop the restrictions entirely. Also, drop a bogus
library dependency on DxeServicesLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Print the minimal 'exception occurred' message to the console as well
as to the serial port if the console is available. This makes such
messages visible on systems where the console is graphical and the
serial is not connected.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Drop the redundant BASE variant, which is no longer used anywhere
now that DebugAgentSymbolsBaseLib no longer incorporates a vector
table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop the reference to ArmPkg/DefaultExceptionHandlerLibBase, which
is no longer used anywhere now that DebugAgentSymbolsBaseLib no
longer incorporates a vector table and exception handling.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Declare that this library is only usable in the context of DXE core
or a DXE driver. Set the MODULE_TYPE to BASE: this only affects the
prototype of the constructor (if present) but doesn't actually
restrict the usage context otherwise.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
DebugAgentSymbolsBaseLib is an optional library that is in charge
of extracting debug headers from SEC and PEI_CORE images in memory
so the filename and the offset in memory can be reported via the
UART, allowing a developer to load debugging symbols into his
debugger.
Interestingly enough, DebugAgentSymbolsBaseLib is also in charge of
exception handling before this duty is taken over by either the PEI
core, or the CPU DXE driver when running under PrePi.
Since exceptions are not actually handled at all on AArch64, and simply
routed to the DefaultExceptionHandlerLib (for which a special version
has been created to be usable this early), let's get rid of this
dubious functionality altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
For build testing coverage, add the newly introduced MM_STANDALONE
versions of the fault tolerant write (FTW) and variable runtime
driver to MdeModulePkg.dsc. Note that the resulting binaries will
not be able to run, since they rely on dummy implementations of
MemoryAllocationLib and HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
VarCheckLib library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
Add MM_STANDALONE to the list of permitted module types of the
AuthVariableLibNull library implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
MdeModulePkg/Universal/DebugSupportDxe/DebugSupportDxe.inf does not
build for AARCH64 since it does not provide the needed PlDebugSupport.h
header. So move the module to a x86 only section.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of
MemoryAllocationLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
In order to permit MM_STANDALONE modules to be built without relying
on StandaloneMmPkg, provide a BASE type NULL implementation of HobLib.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>.
The newly introduced generic MmServicesTableLib can be implemented
for traditional SMM (as we did already), but MM_STANDALONE drivers
require an implementation that is based on standalone MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reuse most of the existing code to implement a variable runtime
driver that will be able to execute in the context of standalone
MM.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based variable runtime
driver, move the existing SMM driver to the new MM services table,
and factor out some pieces that are specific to the traditional
driver, mainly related to the use of UEFI boot services, which are
not accessible to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Implement a new version of the fault tolerant write driver that can
be used in the context of a standalone MM implementation.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
In preparation of providing a standalone MM based FTW driver, move
the existing SMM driver to the new MM services table, and factor out
some pieces that are specific to the traditional driver, mainly
related to the use of UEFI boot services, which are not accessible
to standalone MM drivers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various Vlv2TbltDevicePkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Michael D Kinney <michael.d.kinney@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various QuarkPlatformPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to various OvmfPkg .dsc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
The SMM based FTW and variable drivers are going to depend on
MmServicesTableLib after a subsequent patch, so add a resolution
for it to MdeModulePkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1426
V2:
(1) Add NULL pointer check for the input parameters
(2) Add check for the "Adjust" value before applying fix ups.
In function PeCoffLoaderRelocateImageForRuntime, it doesn't
do much check when do relocation. For API level consideration,
it's not safe enough.
So this patch is to replace the same code logic with function
PeCoffLoaderImageAddress which will cover more validation.
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
XCODE5 reports warning "equality comparison with extraneous parentheses".
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Yonghong Zhu <yonghong.zhu@intel.com>
Warning message is that "equality comparison with extraneous parentheses"
Remove extraneous parentheses around the comparison to silence this warning.
This issue is caused by commit 8daa4278e8.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Feng Bob C <bob.c.feng@intel.com>
Reviewed-by: Feng Bob C <bob.c.feng@intel.com>
In AcquireSpinLock function, it may call GetPerformanceCounter which
final calls PeiService table. This code may also been used by AP but
AP should not calls PeiService. This patch update code to avoid use
AcquireSpinLock function.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Jian Wang <jian.j.wang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
((Facs->Flags & EFI_ACPI_4_0_OSPM_64BIT_WAKE__F) != 0))
In above code, Facs->OspmFlags should be used instead.
EFI_ACPI_4_0_OSPM_64BIT_WAKE__F is a bit in OSPM Enabled Firmware
Control Structure Flags field, not in Firmware Control Structure
Feature Flags.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1430
Cc: Aleksiy <oleksiyy@ami.com>
Cc: Ray Ni <ray.ni@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Take care not to dereference BlockEntry if it may be pointing past
the end of the page table we are manipulating. It is only a read,
and thus harmless, but HeapGuard triggers on it so let's fix it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Ignore calls to ArmSetMemoryAttributes () when the region described
is outside of the 32-bit addressable range. This memory is not
mapped in the first place, and the current code does not deal with
the high bits correctly, resulting in hangs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GCC for 32-bit ARM chokes on .aslc files when running with LTO
enabled. Since LTO has no benefit whatsoever here, just disable
it globally for GCC5 and up when building .aslc files.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The definitions of the rebranded MM protocol stack were chosen such
that the existing SMM based core drivers can be reused. So let's
implement MmServicesTableLib based on gEfiMmBaseProtocolGuid, which
is simply gEfiSmmBase2ProtocolGuid under the hood.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
SMM has been rebranded as MM, and can be implemented in traditional
mode or standalone mode, using the same prototype for the services
table. Expose this table via MmServicesTableLib, permitting the
respective implementations to expose a traditional or standalone
version.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
V3:
Define union to specify the ppi or protocol.
V2:
1. Initialize CpuFeaturesData->MpService in CpuInitDataInitialize
and make this function been called at the begin of the
initialization.
2. let all other functions use CpuFeaturesData->MpService install
of locate the protocol itself.
V1:
GetProcessorIndex function calls GetMpPpi to get the MP Ppi.
Ap will calls GetProcessorIndex function which final let AP calls
PeiService.
This patch avoid GetProcessorIndex call PeiService.
BZ: https://bugzilla.tianocore.org/show_bug.cgi?id=1411
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Ray Ni <ray.ni@intel.com>
BZ:https://bugzilla.tianocore.org/show_bug.cgi?id=1427
1. UserIdentifyManagerDxe is used to provide UserManagerProtocol.
2. UserProfileManagerDxe provides UI setting
3. PwdCredentialProviderDxe & UsbCredentialProviderDxe are implementation
examples.
Remove above features because of no platform use it.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chen A Chen <chen.a.chen@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
PopulateLevel2PageTable () is invoked for [parts of] mappings that
start or end on a non-1 MB aligned address (or both). The size of
the mapping depends on both the start address modulo 1 MB and the
length of the mapping, but the logic that calculates this size is
flawed: subtracting 'start address modulo 1 MB' could result in a
negative value for the remaining length, which is obviously wrong.
So instead, take either RemainLength, or the rest of the 1 MB
block, whichever is smaller.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Eugene Cohen <eugene@hp.com>
Commit 829633e3a8 ("ArmPkg/ArmMmuLib: Add new attribute
WRITE_BACK_NONSHAREABLE") introduced support for non-shareable
cached mappings to the AArch64 version of ArmMmuLib, but the ARM
version was left behind, so fix that.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Build tool do not support SET syntax in DSC.
If the SET statement is used in DSC, build tool just ignore it.
That behavior confused some users that
they think SET statement works in DSC like in FDF.
To avoid such confusion, build tool report ERROR
if there is "SET" statement in Dsc file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Cc: Liming Gao <liming.gao@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1433
v2: Remove an unused variable.
Current logic of shell tftp download was writing file after tftp
download finished, when the file is large, it looks like the shell
tftp command hanged after download was finished. To improve
end-user experience, the solution is using split file writing
instead.
This patch update the code to open and close file inside
DownloadFile(), and save each packet to file within callback
function CheckPacket().
Since AllocatePage() is no-longer needed, This patch can also
remove the memory limitation. The download file can be larger
than system free memory now.
Cc: Jaben Carsey <jaben.carsey@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Wu Jiaxin <jiaxin.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Songpeng Li <songpeng.li@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Wu Jiaxin <jiaxin.wu@intel.com>
Provided functions in UEFILib that abstract driver model protocol
uninstallation. This helps drivers to install and uninstall protocols
using a library to keep things seemless.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1429
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
1 - Some of these imports are cascaded from another file. Import them locally.
2 - Some of these imports are not used. Remove them.
3 - Some of these were missing the namespace used to import them.
These changes facilitate optimization of BaseTools:
https://bugzilla.tianocore.org/show_bug.cgi?id=42
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1415
When an integer constant specified in the .vfr file is
too large for the varstore field it is being used with,
the VFR compiler reports an overflow warning like this:
Test.vfr(693): WARNING: Overflow: Value 1024 is too large to
store in a UINT8
: String to UINT* Overflow
Since Warning does not break the build process,
and it is easy to miss it.
This patch is to update the code to report error and break
the build if meet this kind of issue.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
"tools_def.template" currently suggests, in the documentation of the
LzmaF86Compress utility, that said tool is generally unhelpful on binaries
built with the GCC44 toolchain, relative to LzmaCompress.
This statement doesn't apply to the GCC48 toolchain. I compressed 126
NOOPT_GCC48/IA32 unique EFI modules (built with gcc-4.8.5, as part of
OVMF) with both LzmaCompress and LzmaF86Compress. I repeated the same for
117 NOOPT_GCC48/X64 unique EFI modules. On average, the LzmaF86Compress
output size was 92.4% of the LzmaCompress output size in the IA32 case
(best relative compression: 86.01%, poorest relative compression: 97.47%
-- still a win). In the X64 case, the LzmaF86Compress output size was
92.95% of the LzmaCompress output size, on avarege (best relative
compression: 87.69%, poorest relative compression: 97.65% -- again, still
a win).
Given the consistent improvement from LzmaCompress to LzmaF86Compress,
remove the statement (rather than updating it to GCC48).
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains, or by multiple
definitions of a given toolchain (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
- GCC44_IA32_X64_DLINK_FLAGS (!)
(b) those that are only used by GCC48 (refcount == 1):
- GCC44_ASM_FLAGS
- GCC44_IA32_CC_FLAGS
- GCC44_IA32_DLINK2_FLAGS
- GCC44_IA32_X64_ASLDLINK_FLAGS
- GCC44_X64_CC_FLAGS
- GCC44_X64_DLINK2_FLAGS
- GCC44_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC44_IA32_PREFIX
- GCC44_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
(It's easier to review this patch with "git show --word-diff".)
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC45_ASM_FLAGS
- GCC45_IA32_CC_FLAGS
- GCC45_IA32_DLINK2_FLAGS
- GCC45_IA32_X64_ASLDLINK_FLAGS
- GCC45_IA32_X64_DLINK_FLAGS
- GCC45_X64_CC_FLAGS
- GCC45_X64_DLINK2_FLAGS
- GCC45_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC45_IA32_PREFIX
- GCC45_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC46_ASM_FLAGS
- GCC46_IA32_CC_FLAGS
- GCC46_IA32_DLINK2_FLAGS
- GCC46_IA32_X64_ASLDLINK_FLAGS
- GCC46_IA32_X64_DLINK_FLAGS
- GCC46_X64_CC_FLAGS
- GCC46_X64_DLINK2_FLAGS
- GCC46_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC46_IA32_PREFIX
- GCC46_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The last patch decremented references on a number of DEFs. They can be
classified into three groups:
(a) those that remain used by multiple toolchains (refcount >= 2):
- GCC_ASLCC_FLAGS
- GCC_ASLPP_FLAGS
- GCC_HOST_PREFIX
- GCC_IA32_RC_FLAGS
- GCC_PP_FLAGS
- GCC_VFRPP_FLAGS
- GCC_X64_RC_FLAGS
- IASL_FLAGS
- IASL_OUTFLAGS
- UNIX_IASL_BIN
(b) those that are only used by GCC48 (refcount == 1):
- GCC47_ASM_FLAGS
- GCC47_IA32_CC_FLAGS
- GCC47_IA32_DLINK2_FLAGS
- GCC47_IA32_X64_ASLDLINK_FLAGS
- GCC47_IA32_X64_DLINK_FLAGS
- GCC47_X64_CC_FLAGS
- GCC47_X64_DLINK2_FLAGS
- GCC47_X64_DLINK_FLAGS
(c) those that are no longer used (refcount == 0):
- GCC47_IA32_PREFIX
- GCC47_X64_PREFIX
For the members of class (b), expand their definitions at the referring
sites, and remove their definitions.
For the members of class (c), remove their definitions.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
DLINK_COMMON definitions are not consumed by "build_rule.template";
instead, DLINK_COMMON definitions (internal to "tools_def.template") were
invented for sharing options between ASLDLINK_FLAGS and DLINK_FLAGS.
However, this intent doesn't actually apply to
GCC48_IA32_X64_DLINK_COMMON: it is never consumed. Furthermore, the
GCC45..GCC47 instances of IA32_X64_DLINK_COMMON too lead up to
GCC48_IA32_X64_DLINK_COMMON only -- they form a dead-end. Remove them
altogether, in order to simplify the subsequent patches.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This drops ARM and AARCH64 support from the GCC46 and GCC47 toolchain
definitions, which are on the list to be removed, along with VS2003,
VS2005, VS2008, VS2010, DDK3790, UNIXGCC, GCC44, GCC45, ELFGCC, CYGGCC,
ICC, ICC11 and MYTOOLS.
Since GCC46 and GCC47 are the only ones on that list that support ARM
and/or AARCH64, let's give Liming a hand and cover the ARM side of
things first, so that everything that remains to be removed is x86
only.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ref: https://bugzilla.tianocore.org/show_bug.cgi?id=1377
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Liming Gao <liming.gao@intel.com>
[lersek@redhat.com: add bugzilla reference and CCs]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
AuthVariableLib library can be used by MM_STANDALONE drivers as well.
So add MM_STANDALONE to the list of module types this library supports.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jagadeesh Ujja <jagadeesh.ujja@arm.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The standalone MM core is executed in place, and resides in a
separate execution context which may be space constrained.
Since code and data may be mapped with different attributes for
security reasons, the PE/COFF binary could have a section
alignment of 4 KB.
This means that any relocation data is not only useless, but it
will also take up 4 KB of valuable space.
So add support for the RELOCS_STRIPPED attribute on FFS files of
this type, so that we can get rid of the .reloc section altogether.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1410
BaseTools should not generate C structure array initial value
if the value is not specified with CODE style.
This patch is going to remove the incorrect initial value statement
and correct the Pcd Array value assignment statement.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
This patch is going to fix the regression issue
by 72a1d77694
After enable PCD array, the Pcd.OverrideStruct has a new
key, array index, but the build report is not changed correspondingly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Addressed warnings and remarks reported by IASL.EXE. Some methods had
unused arguments. A method was returning a value when it should not.
Cc: Zhang Chao B <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Thomas Rydman <thomas.j.rydman@intel.com>
Reviewed-by: Zhang Chao B <chao.b.zhang@intel.com>
Add SDMA, ADMA2 and 26b data length support.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
SDMA registers supporting 64 bit addresses.
If V4 64 bit address mode is supported in capabilities register,
program controller to enable V4 host mode and use appropriate
ADMA descriptors supporting 64 bit addresses.
If host controller version is above V4.0, enable ADMA2 with 26b data
length support for better performance. HC 2 register is configured to
use 26 bit data lengths and ADMA2 descriptors are configured appropriately.
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1359
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Use __builtin_unreachable instead of infinite recursion to fix an
infinite recursion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
According to the POSIX standard, cc_t, speed_t, and tcflag_t should be
unsigned integer types. Define cc_t as unsigned to match POSIX and fix
an implicit conversion error when building StdLib with XCODE5/CLANG38.
Cc: Daryl McDaniel <edk2-lists@mc2research.org>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Alex James <theracermaster@gmail.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1091
Previously, when compiling NASM source files, BaseTools did not support
including files outside of the NASM source file directory. As a result, we
duplicated multiple copies of "StuffRsb.inc" files in UefiCpuPkg. Those
INC files contain the common logic to stuff the Return Stack Buffer and
are identical.
After the fix of BZ 1085:
https://bugzilla.tianocore.org/show_bug.cgi?id=1085
The above support was introduced.
Thus, this commit will merge all the StuffRsb.inc files in UefiCpuPkg into
one file. The merged file will be named 'StuffRsbNasm.inc' and be placed
under folder UefiCpuPkg/Include/.
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Eric Dong <eric.dong@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1418
This patch is going to fix a regression issue that is introduced
by commit b3497bad12.
Before commit b3497b, build launched a external GenFds.py to generate
Fd, so the global variable in GenFds.py was reset in each execution.
After commit b3497b, each GenFds run in the same python interpeter, so
we need to explicitly reset global variable in each GenFdsApi call.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
Since BaseLib API AsmLfence() is a x86 arch specific API and should be
avoided using in generic codes, this commit replaces the usage of
AsmLfence() with arch-generic API SpeculationBarrier().
Please note that speculation execution barriers are intended to be
asserted for SMM codes, hence, this commit still preserve an empty
implementation of the speculation execution barrier for the DXE codes.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF:https://bugzilla.tianocore.org/show_bug.cgi?id=1417
X86 specific BaseLib API AsmLfence() was introduced to address the Spectre
Variant 1 (CVE-2017-5753) issue. The purpose of this API is to insert
barriers to stop speculative execution. However, the API is highly
architecture (X86) specific, and thus should be avoided using across
generic code.
To address this issue, this patch will add a new BaseLib API called
SpeculationBarrier(). Different architectures will have different
implementations for this API.
For IA32 and x64, the implementation of SpeculationBarrier() will
directly call AsmLfence().
For ARM and AARCH64, this patch will add a temporary empty implementation
as a placeholder. We hope experts in ARM can help to contribute the actual
implementation.
For EBC, similar to the ARM and AARCH64 cases, a temporary empty
implementation is added.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Cc: Laszlo Ersek <lersek@redhat.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Hao Wu <hao.a.wu@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The 'arm-linux-gnueabihf' target triplet we use for CLANG35 and
CLANG38 specifies a hardfloat target, and so the binaries that are
emitted are annotated as using VFP registers for passing floating
point arguments, even though no VFP is used anywhere in the code.
This works fine as long as we don't try to link against code
that uses software floating point, but combining object files
with different floating point calling conventions is not permitted.
So switch to the softfloat arm-linux-gnueabi triplet instead.
This affects both the name Clang uses when invoking the linker,
and the arguments it passes to it, and we are mostly interested
in the latter (since any version of GNU ld.bfd will do the right
thing as long as it targets EABI ARM)
For native builds, this change has no effect, since the unprefixed
system linker will take priority, and so Clang will pass the right
arguments to whichever linker happens to be the system linker.
For cross builds, the fact that Clang composes the name of the
linker by prefixing '-ld' with the target triplet implies that
users will have to switch to a version of binutils that targets
arm-linux-gnueabi rather than arm-linux-gnueabihf. Note that the
GCCx toolchain targets can use either when building for ARM so this
does not create a need to install two versions of the ARM cross
toolchain. Also, note that all ARM toolchains in the GCC family
are already documented as requiring a toolchain that targets
arm-linux-gnueabi and not arm-linux-gnueabihf.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Add function to allow enabling and disabling of the clock using the SCMI
interface. Add gArmScmiClock2ProtocolGuid to distinguish platforms that
support new API from those that just have the older protocol.
SCMI_CLOCK2_PROTOCOL also adds a version parameter to allow for future
changes. It is placed after the functions that are present in the
existing protocol to allow SCMI_CLOCK2_PROTOCOL to be cast to
SCMI_CLOCK_PROTOCOL so that only a single implementation of those
function are needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Use an untyped PCD reference for PcdSerialRegisterBase, so that the
library gets built without hardcoded values, permitting modules to
override the default serial port. This allows SerialDxe to use a
different serial port from the one used for DEBUG output (which
often gets occluded due to the console driver clearing the screen).
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Even though UEFI does not appear to use it, let's implement the
complete PI watchdog protocol, including handler registration,
which will be invoked before the ResetSystem() runtime service
when the watchdog timer expires.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Clean up the code, by adding missing STATIC modifiers, drop
redundant casts, and get rid of the 'success handling' anti
pattern in the entry point code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The SP805 watchdog driver doesn't implement the PI watchdog protocol
fully, but always simply resets the system if the watchdog time runs
out.
However, the hardware does support the intended usage model, as long
as the SP805 is wired up correctly. So let's implement interrupt based
mode involving a handler that is registered by the DXE core and invoked
when the watchdog runs out. In the interrupt handler, we invoke the
notify function if one was registered, before calling the ResetSystem()
runtime service (as per the UEFI spec)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Before fixing the SP805 driver, let's clean it up a bit. No
functional changes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Instead of #defining MAX_ALLOC_ADDRESS to MAX_ADDRESS as intended,
it is #defined to itself, causing all ARM builds to break.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The current ArmVirtMemoryInitPeiLib code splits the memory region passed
via PcdSystemMemoryBase/PcdSystemMemorySize in two if the region extends
beyond the MAX_ADDRESS limit. This was introduced for 32-bit ARM, which
may support more than 4 GB of physical address space, but cannot address
all of it via a 1:1 mapping, and a single region that is not mappable
in its entirety is unusable by the PEI core.
AArch64 is in a similar situation now: platforms may support more than
256 TB of physical address space, but only 256 TB is addressable by the
CPU, and so a memory region that extends from below this limit to above
it should be split.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Limit the PEI memory region so it will not extend beyond what we can
address architecturally when running with 4 KB pages.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When creating the page tables for the 1:1 mapping, ensure that we don't
attempt to map more than what is architecturally permitted when running
with 4 KB pages, which is 48 bits of VA. This will be reflected in the
value of MAX_ALLOC_ADDRESS once we override it for AArch64, so use that
macro instead of MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Take MAX_ALLOC_ADDRESS into account in the implementation of the
page allocation routines, so that they will only return memory
that is addressable by the CPU at boot time, even if more memory
is available in the GCD memory map.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Update the GCD memory map initialization code so it disregards
memory that is not addressable by the CPU at boot time. This
only affects the first memory descriptor that is added, other
memory descriptors are permitted that describe memory ranges
that may be accessible to the CPU itself only when executing
under the OS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
On some architectures, the maximum representable address deviates from
the virtual address range that is accessible by the firmware at boot
time. For instance, on AArch64, UEFI mandates a 4 KB page size, which
limits the address space to 48 bits, while more than that may be
populated on a particular platform, for use by the OS.
So introduce a new macro MAX_ALLOC_ADDRESS, which represent the maximum
address the firmware should take into account when allocating memory
ranges that need to be accessible by the CPU at boot time.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Ensure that we prevent the CPU from proceeding after having taken an
unhandled exception on a RELEASE build, which does not contain the
ASSERT() which ensures this on DEBUG and NOOPT builds.
Retain the code following the deadloop so that we can keep going when
running in a debugger.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The ARM linker may emit veneers, i.e., trampolines, when ordinary
direct relative branches cannot be used, e.g., for Thumb interworking
or branch targets that are out of range.
Usually, such veneers carry an absolute reference to the branch
target, which is problematic for us, since these absolute references
are not covered by annotations that are visible to GenFw in the
PE/COFF conversion, and so these absolute references are not fixed
up by the PE/COFF loader at runtime.
So switch to all ARM GNU ld toolchains to position independent veneers.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The GdbDebugAgent library is unused and unmaintained, and now it
turns out it doesn't build with Clang, so let's just get rid of it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The following Pcds
- gArmTokenSpaceGuid.PcdArmLinuxSpinTable
- gArmTokenSpaceGuid.PcdArmLinuxAtagMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtMaxOffset
- gArmTokenSpaceGuid.PcdArmLinuxFdtAlignment
remained defined, without actual users.
So get rid of them.
One reference to be deleted separately from edk2-platforms.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fix a bug because of b3497bad12.
Before the patch, when GenFds fail, the build continue and return success.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Derek Lin <derek.lin2@hpe.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPpiSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update PeiCore to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxFvSupported in Tcg(2)Pei.
Cc: Chao Zhang <chao.b.zhang@intel.com>
Cc: Jiewen Yao <jiewen.yao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Chao Zhang <chao.b.zhang@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1405
Background as below.
Problem:
As static configuration from the PCDs, the binary PeiCore (for example
in FSP binary with dispatch mode) could not predict how many FVs,
Files or PPIs for different platforms.
Burden:
Platform developers need configure the PCDs accordingly for different
platforms.
To solve the problem and remove the burden, we can update code to
remove the using of PcdPeiCoreMaxFvSupported, PcdPeiCoreMaxPeimPerFv
and PcdPeiCoreMaxPpiSupported by extending buffer dynamically for FV,
File and PPI management.
This patch removes the using of PcdPeiCoreMaxPeimPerFv in PeiCore.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Cc: Michael D Kinney <michael.d.kinney@intel.com>
Cc: Nate DeSimone <nathaniel.l.desimone@intel.com>
Cc: Chasel Chiu <chasel.chiu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Jian J Wang <jian.j.wang@intel.com>
Reviewed-by: Chasel Chiu <chasel.chiu@intel.com>
current edk2\BaseTools\Conf\build_rule.template, the compile of nasm
source files does not have the $(INC) support.
The '-I' option only includes the directory of the nasm source file
(${s_path}(+)). Hence, it will be impossible for nasm files to include
files outside of the nasm source file directory.
As a comparison, the compile of both .s and .asm have $(INC) support
in their compile commands.
Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=1085
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Zhiju.Fan <zhijux.fan@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1390
1. support hex number for array index
2. support Non-Dynamic Pcd for array data type
3. support {} and {CODE()} for array data type
4. Change GetStructurePcdMaxSize to be a static function since it need to
be called in another static function. And this function does not depend on
it's class instance.
5. Add unittest for RemoveCComments function and
ArrayIndex regular expression.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Philippe Mathieu-Daud? <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") incorrectly added the BaseCryptLib, OpensslLib
and IntrinsicLib to "ArmVirtPkg/ArmVirtQemuKernel.dsc", it's redundant
and the library instances from "ArmVirt.dsc.inc" is already sufficient.
This patch also adjust the order of network drivers in "ArmVirtPkg/
ArmVirtQemuFvMain.fdf.inc" to make it same as the DSC file.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
UEFI SCT crashed and failed in NonDiscoverablePciDeviceDxe becase
required checks were not performed. Perform parameters validation in
NonDiscoverablePciDeviceDxe.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel at linaro.org>
Our default is already armv7-a, so no need to rewrite the PLATFORM_FLAGS
for that. Also, setting -mfpu=neon is not entirely inappropriate, since
NEON is not mandatory under v7.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Commit 9a67ba261f ("ArmVirtPkg: Replace obsoleted network drivers
from platform DSC/FDF") failed to take into account that the now
unconditionally included IScsiDxe.inf from NetworkPkg requires a
resolution for TcpIoLib. Since specifying such a resolution is harmless
for platforms that have no networking enabled, let's just fix things
by dropping the conditionals around it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch replaces the MdeModulePkg TCP, PXE and iSCSI driver with those
ones in NetworkPkg. These 3 drivers in MdeModulePkg are not being actively
maintained and will be removed from edk2 master soon.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Julien Grall <julien.grall@linaro.org>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Fu Siyuan <siyuan.fu@intel.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Drop the -mno-movt command line option override, which is no longer
needed, and actually incompatible with versions of Clang before 3.6.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
PE/COFF only has a very limited id space for runtime relocations, and
so it defines only a single relocation for movw/movt instruction pairs,
which can be combined to load a 32-bit symbol reference into a register.
For this to work as expected, these instructions must always appear in
the same order and adjacently, and this is something few compilers take
into account, unless they target PE/COFF explicitly (and this is not the
case for our ELF based toolchains)
For Clang 3.6 and later, we can pass the -mno-movt option to suppress
movw/movt pairs entirely, which works around the issue. Unfortunately,
for Clang 3.5, the option is called differently (-mllvm -arm-use-movt=0)
and mutually incompatible between 3.5 and 3.6.
Since it is desirable for the CLANG35 toolchain to be usable on newer
versions of Clang as well (given that it is the only non-LTO alternative
to CLANG38), let's work around this issue in a way that permits versions
3.5 and newer of Clang to be used with the CLANG35 profile.
So pass the -mkernel flag instead (and add -Qunused-argument so Clang
does not complain about the -mno-unaligned-access in ARM_CC_XIPFLAGS).
This also inhibits movw/movt generation, along with some other changes
(e.g., long calls) which do affect code generation but not in an
undesirable manner.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
ARM uses the low order bit of a branch target address to decide in
which execution mode (ARM or Thumb) a function needs to be called.
In order for this to work across object files, ELF function symbols
will have the low bit set if they were emitted in Thumb mode and
cleared otherwise. This annotation is only emitted if the ELF symbols
are annotated as function, since taking the address of some data
symbol (e.g., a literal) should not produce a value with the low bit
set, even if it appears in an object file containing Thumb code.
This means that all functions coded in assembler must have this
function annotation, or they may end up getting called in the
wrong mode, crashing the program.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
We currently permit R_ARM_GOT_PREL relocations in the ELF32 conversion
routines, under the assumption that relative relocations are fine as
long as the section layout is the same between ELF and PE/COFF.
However, as is the case with any proxy generating relocation, it is
up to the linker to emit an entry in the GOT table and populate it
with the correct absolute address, which should also be fixed up at
PE/COFF load time. Unfortunately, the relocations covering the GOT
section are not emitted into the static relocation sections processed
by GenFw, but only in the dynamic relocation section as a R_ARM_RELATIVE
relocation, and so GenFw fails to emit the correct PE/COFF relocation
data for GOT entries.
Since GOT indirection is pointless anyway for PE/COFF modules running
in UEFI context, let's just drop the references to R_ARM_GOT_PREL from
GenFw, resulting in a build time failure rather than a runtime failure
if such relocations do occur.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The self-relocating PrePi module that is used by the ArmVirtQemuKernel
and ArmVirtXen targets runs the linker in PIE mode so that it emits
dynamic relocations into the final image in a way that permits the
module to relocate itself into place before calling into the C code.
When building these targets using the CLANG38 toolchain, we switch
from the BFD to the GOLD linker, which behaves a bit differently when
building PIE executables, and insists on emitting GOT indirected symbol
references throughout, which means a) that we end up with absolute
addresses (which need to be fixed up at load time) for no good reason,
and b) we have to add support for handling GOT entries to GenFw if we
want to convert them into PE/COFF.
So instead, let's emit a shared library. Since the ELF image only serves
as the input to GenFw, this does not lead to any loss of functionality,
although it does require the -Bsymbolic linker option to be added to
ensure that no symbol based dynamic relocations are emitted (which
would, e.g., permit lazy binding for shared libraries). So for all
other toolchains, the linker option changes are a no-op.
Then, we have to convince CLANG38/GOLD that there is no need to refer
to symbols via a GOT entry. This is done by forcing hidden visibility
for all symbols in all components that make up the PrePi SEC module:
this informs the linker that a symbol is never exported or preempted,
making it safe to refer to it directly from anywhere in the code,
rather than indirectly via a GOT entry.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Move some PCD settings outs of the [PcdsFixedAtBuild.AARCH64] block,
so that they apply to 32-bit ARM as well. Without this change, the
ARM build doesn't work.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Since 4 KB section alignment is required when mapping PE/COFF images
with strict permissions, update the default section alignment when
using GCC49 and GCC5 in RELEASE mode. Note that XIP modules such as
SEC, PEIMs or PEI core are not affected by this change, since the
override to 32 byte aligment remains in effect.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Struct packing is only necessary for data structures whose in-memory
representation is covered by the PI or UEFI specs, and may deviate
from the ordinary C rules for alignment.
So in case of FileExplorerLib, this applies to the device path struct
only, and other structures used to carry program data should not be
packed, or we may end up with alignment faults on architectures such
as ARM, which don't permit load/store double or multiple instructions
to access memory locations that are not 32-bit aligned.
E.g., the following call in FileExplorerLibConstructor()
InitializeListHead (&gFileExplorerPrivate.FsOptionMenu->Head);
which is emitted as follows for 32-bit ARM/Thumb2 by Clang-5.0
3de0: b510 push {r4, lr}
3de2: 4604 mov r4, r0
...
3de8: e9c4 4400 strd r4, r4, [r4]
3dec: bd10 pop {r4, pc}
will perform a double-word store on the first argument, passed in
register r0, assuming that the pointer type of the argument is
enough to guarantee that the value is suitably aligned.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1376
Today's implementation reuses the 32bit MMIO resource requested by
all PCI devices MMIO BARs when shadowing the option ROM.
Take a simple example, a system has only one PCI device. It requires
8MB 32bit MMIO and contains a 4MB option ROM. Today's implementation
only requests 8MB (max of 4M and 8M) 32bit MMIO from
PciHostBridgeResourceAllocation protocol. Let's assume the MMIO range
[3GB, 3GB+8MB) is allocated. The 3GB base address is firstly
programmed to the option ROM BAR for option ROM shadow. Then the
option ROM decoding is turned off and 3GB base address is programmed
to the 32bit MMIO BAR.
It doesn't cause issues when the device doesn't request too much
MMIO.
But when the device contains a 64bit MMIO BAR which requests 4GB MMIO
and a 4MB option ROM. Let's assume [3GB, 3GB+8MB) 32bit MMIO range is
allocated for the option ROM. When the option ROM is being shadowed,
64bit MMIO BAR is programmed to value 0, which means [0, 4GB) MMIO is
given to the 64bit BAR.
The range overlaps with the option ROM range which may cause the
device malfunction (e.g.: option ROM cannot be read out) when the
device has two separate decoders: one for MMIO BAR, the other for
option ROM.
The patch requests dedicated MEM32 resource for Option ROMs and
moves the Option ROM shadow logic after all MMIO BARs are programmed.
The MMIO BAR setting to 0 when shadowing Option ROM is also skipped
because the MMIO BAR already contains the correct value.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ruiyu Ni <ruiyu.ni@intel.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
The StandaloneMM image executes in S-EL0 on reference Arm platforms
and is deployed by the trusted firmware as BL32 image. Memory for the
Standalone MM drivers is marked as RW+XN initially, allowing the
drivers to be loaded into the memory. Once loaded, the memory
attributes need to be changed to RO+XN for rodata sections and RO+X
for code sections.
Achieve this through the extra action 'UpdatePeCoffPermissions' to
request the privileged firmware in EL3 to update the permissions.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
The MMU functions needed for StandaloneMM image are now exported
through a separate library class. Make the corresponding change in the
core's entry point inf file so that it references the correct library
class for modifying the MMU attributes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
Introduction of the -mstrict-align flag results in GCC attempting
to use memset to zero out the InitMmFoundationSvcArgs structure.
In the absence of this C library function, this patch explicitly
zeroes this data structure prior to use.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
On AArch64, Standalone MM during the SEC phase runs in S-EL0 with
SCTLR_EL1.A=1. This patch adds the -mstrict-align compiler flag to
ensure that the generated code is compliant with the runtime
alignment checks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This patch fixes the dependency PL011UartLib has on PL011UartClockLib by
including its implementation path in the StandaloneMm DSC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Achin Gupta <achin.gupta@arm.com>
This reverts commit 82379bf660.
On AArch64, we can only use 48 address bits while running in UEFI,
while the GCD and UEFI memory maps may describe up to 52 bits of
physical address space. For this reason, MAX_ADDRESS was reduced
to 48 bits, to ensure that the firmware does not inadvertently
attempt to allocate memory that we cannot access.
However, MAX_ADDRESS is used in runtime drivers as well, and
runtime drivers may deal with kernel virtual addresses, which have
bits [63:48] set. In fact, the OS may be running with 64 KB pages
and pass addresses into the runtime services that use up to 52
bits of address space, either with the top bits set or cleared,
even if the physical address space does not extend beyond 48 bits.
In summary, changing MAX_ADDRESS is a mistake, and needs to be
reverted.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to customize the deepcopy function for
SkuClass, PcdClassObject and python dictionary.
python deepcopy copy everything of a object, but for our current
usage we just need to copy the data we care about recursively.
By implementing __deepcopy__ for SkuClass, PcdClassObject, we can customize
deepcopy function for them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
This patch is one of build tool performance improvement
series patches.
This patch is going to use join function instead of
string += string2 statement.
Current code use string += string2 in a loop to combine
a string. while creating a string list in a loop and using
"".join(stringlist) after the loop will be much faster.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
[V2]
Optimize this patch so that it can be easy to review.
This patch is just apply the change to original files while
not create new similar files.
[V1]
This patch is one of build tool performance improvement
series patches.
This patch is going to use python list to store the parser data
instead of using sqlite database.
The replacement solution is as below:
SQL insert: list.append()
SQL select: list comprehension. for example:
Select * from table where field = “something”
->
[ item for item in table if item[3] == “something”]
SQL update: python map function. for example:
Update table set field1=newvalue where filed2 = “something”.
-> map(lambda x: x[1] = newvalue,
[item for item in table if item[2] == “something”])
SQL delete: list comprehension.
With this change, We can save the time of interpreting SQL statement
and the time of write database to file system
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: BobCF <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
V2:
Extract the common part of new API and the original main() function
into one function.
V1:
https://bugzilla.tianocore.org/show_bug.cgi?id=1288
Currently, AutoGen and GenFds run in different python interpreters. The
parser are duplicated. This patch is going to create new API for GenFds
and have the build to call that API instead of executing GenFds.py. As
such, the GenFds and build can share the parser data.
This patch is expected to save the time of GenFds about 2~3 seconds.
More details will be logged in BZ.
This is the summary measure data generated from python cProfile for
building Ovmf.
Currently:
8379147 function calls (8135450 primitive calls) in 12.580 seconds
After applying this patch:
3428712 function calls (3418881 primitive calls) in 8.944 seconds
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: ZhiqiangX Zhao <zhiqiangx.zhao@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Cc: Carsey Jaben <jaben.carsey@intel.com>
Cc: Bob Feng <bob.c.feng@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
V2:
Fixed the issue that V1 adds new check
to the Pcds in the platform unused library INF files.
It breaks the existing platform.
V1?
The current code handle all the structure pcds
even if there is no module or library use them.
This patch is going to filter out the unused structure pcds.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Add dummy RPC handler for RPCs that are not implemented as control
should be returned back to OP-TEE in case any RPC is invoked.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
1) remove an identical function and import it from Common.LongFilePathSupport
2) remove an import that is not needed/used.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Yonghong Zhu <yonghong.zhu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by : Bob Feng <bob.c.feng@intel.com>
The macro MAX_ADDRESS represents the largest virtual address that
is valid for a certain architecture. For the BaseTools, this quantity
is irrelevant, since the same tools can be used to build for different
targets.
Since we only refer to it in a single place, which is an ASSERT() that
doesn't seem particularly useful (it ensures that memcpy() will not
be called with arguments that will make it read beyond the end of the
address space and wrap around), let's drop the ASSERT and all references
to MAX_ADDRESS.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
The maximum value that can be represented by the native word size
of the *target* should be irrelevant when compiling tools that
run on the build *host*. So drop the definition of MAX_UINTN, now
that we no longer use it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Parsing a string into an integer variable of the native word size
is not defined for the BaseTools, since the same tools may be used
to build firmware for different targets with different native word
sizes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace the default size limit of IsDevicePathValid() with a value
that does not depend on the native word size of the build host.
4 GiB seems sufficient as the upper bound of a device path handled
by UEFI.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Since we will be dropping the definition of MAX_UINTN, whose meaning
is ambiguous for the BaseTools, add a definition of MAX_UINT32 that
we can switch to.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Replace invocations of StrHexToUintn() with StrHexToUint64(), so
that we can drop the former.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Don't use the native word size string to number parsing routines,
but instead, use the 64-bit one and cast to UINTN.
Currently, the only user is in Source/C/DevicePath/DevicePathFromText.c
which takes care to use Strtoi64 () unless it assumes the value fits
in 32-bit, so this change is a no-op even on 32-bit build hosts.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Jaben Carsey <jaben.carsey@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In the context of the BaseTools, there is no such thing as a native word
size, given that the same set of tools may be used to build a firmware
image consisting of both 32-bit and 64-bit modules.
So update StrToIpv4Address() and StrToIpv6Address() to use UINT64
types instead of UINTN types when parsing strings.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
As Yonghong has some other focus, change him from maintainer
to reviewer, Bob will be the new maintainer.
Cc: Bob Feng <bob.c.feng@intel.com>
Cc: Liming Gao <liming.gao@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Yonghong Zhu <yonghong.zhu@intel.com>
Reviewed-by: Bob Feng <bob.c.feng@intel.com>
QEMU/mach-virt is rather unhelpful when it comes to tracking down
NULL pointer dereferences that occur while running in UEFI: since
we have NOR flash mapped at address 0x0, inadvertent reads go
unnoticed, and even most writes are silently dropped, unless you're
unlucky and the instruction in question is one that KVM cannot
emulate, in which case you end up with a QEMU crash like this:
error: kvm run failed Function not implemented
PC=000000013f7ff804 X00=000000013f7ab108 X01=0000000000000064
X02=000000013f801988 X03=00000000800003c4 X04=0000000000000000
X05=0000000096000044 X06=fffffffffffd8270 X07=000000013f7ab4a0
X08=0000000000000001 X09=000000013f803b88 X10=000000013f7e88d0
X11=0000000000000009 X12=000000013f7ab554 X13=0000000000000008
X14=0000000000000002 X15=0000000000000000 X16=0000000000000000
X17=0000000000000000 X18=0000000000000000 X19=0000000000000000
X20=000000013f81c000 X21=000000013f7ab170 X22=000000013f81c000
X23=0000000009000018 X24=000000013f407020 X25=000000013f81c000
X26=000000013f803530 X27=000000013f802000 X28=000000013f7ab270
X29=000000013f7ab0d0 X30=000000013f7fee10 SP=000000013f7a6f30
PSTATE=800003c5 N--- EL1h
and a warning in the host kernel log that load/store instruction
decoding is not supported by KVM.
Given that the first page of the flash device is not actually
used anyway, let's reduce the mappings of the peripheral space
and the flash device (both of which cover page #0) to only cover
what is actually required:
ArmVirtQemu.fdf:
> 0x00001000|0x001ff000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
ArmVirtQemuKernel.fdf:
> 0x00008000|0x001f8000
> gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
For ArmVirtQemu, the resulting virtual mapping looks roughly like:
- [0, 4K) : flash, unmapped
- [4K, 2M) : flash, mapped as WB+X RAM
- [2M, 64M) : flash, unmapped
- [64M, 128M) : varstore flash, will be mapped by the NOR flash driver
- [128M, 256M) : peripherals, mapped as device
- [256M, 1GB) : 32-bit MMIO aperture, translated IO aperture, ECAM,
will be mapped by the PCI host bridge driver
- [1GB, ...) : RAM, mapped.
After this change, any inadvertent read or write from/to the first
physical page will trigger a translation fault inside the guest,
regardless of the nature of the instruction, without crashing QEMU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The primary FV contains the firmware boot image, which is not
runtime updatable in our case. So exposing it to the NOR flash
driver is undesirable, since it may attempt to modify the NOR
flash contents. It is also rather pointless, since we don't
keep anything there that we care to expose. (the SEC and PEI
phase modules are not executable from DXE context, and the
contents of the embedded DXE phase FV are exposed by the DXE
core directly via the FVB2 protocol)
So let's disregard the NOR flash block that covers the primary
FV.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The ARM ArmMmuLib code currently does not take into account that
setting permissions on a region should take into account that a
region may not be mapped yet to begin with.
So when updating a section descriptor whose old value is zero,
pass in the address explicitly.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
GetMemoryRegion() is used to obtain the attributes of an existing
mapping, to permit permission attribute changes to be optimized
away if the attributes don't actually change.
The current ARM code assumes that a section mapping or a page mapping
exists for any region passed into GetMemoryRegion(), but the region
may be unmapped entirely, in which case the code will crash. So check
if a section mapping exists before dereferencing it.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
PcdPrePiCpuMemorySize is no longer used so drop the declarations from
the package DEC file.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
PcdPrePiCpuMemorySize is no longer used so drop the PCD overrides
from all platform descriptions in ArmVirtPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the reference to gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
which is never used.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Drop some PCD references that are not actually referenced from the
PlatformPei code.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Derive the size of the GCD memory space map directly from the CPU's
information registers rather than from the PcdPrePiCpuMemorySize PCD,
which will be removed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In preparation of dropping PcdPrePiCpuMemorySize entirely, base the
maximum size of the identity map on the capabilities of the CPU.
Since that may exceed what is architecturally permitted when using
4 KB pages, take MAX_ADDRESS into account as well.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Use the new ArmLib helper to read the CPU's physical address limit
so we can drop our own homecooked one.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add a helper function that returns the maximum physical address space
size as supported by the current CPU.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
AArch64 supports the use of more than 48 bits for physical and/or
virtual addressing, but only if the page size is set to 64 KB,
which is not supported by UEFI. So redefine MAX_ADDRESS to cover
only 48 address bits.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Liming Gao <liming.gao@intel.com>
Currently, we map DRAM as EFI_MEMORY_WB, and the remainder of the
entire virtual address space is mapped with EFI_MEMORY_UC attributes,
regardless of whether any devices actually reside there.
Now that we are relaxing the address space limit to more than 40 bits,
mapping all that address space actually takes up more space in page
tables than we have so far made available as temporary RAM. So let's
get rid of the mapping rather than increasing the available RAM, given
that the mapping is not particularly useful anyway.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Up until now, we have been getting away with not declaring the ECAM
and translated I/O spaces at all in the GCD memory map, simply because
we map the entire address space with device attributes in the early PEI
code, and so the ECAM space will be mapped wherever it ends up.
Now that we are about to make changes to how ArmVirtQemu reasons
about the size of the address space, it would be better to get rid
of this mapping of the entire address space, since it can get
arbitrarily large without real benefit.
So start by mapping the ECAM and translated I/O spaces explicitly,
instead of relying on the early PEI mapping.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Drop the declaration and the implementation of CreateHoblist(),
which is not used anywhere.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Remove this module: it is unused, and should not be used as an
example going forward.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
As Star has some other focus, change Star from maintainer
to reviewer, Jian will be the first maintainer, and add
Hao as the second maintainer.
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Star Zeng <star.zeng@intel.com>
Acked-by: Hao Wu <hao.a.wu@intel.com>
Acked-by: Jian J Wang <jian.j.wang@intel.com>
This function is exposed by the MemoryAllocationLib header.
An AllocateZeroPool() function has been added to fix modules depending on
this library and this function.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1297
When the header files are not found for the used C structure, this script will
report the warning, let user know there is no header file to define C structure.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Wang BinX A <binx.a.wang@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
In V2, change his to the, and add new maintainers follow up.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
While this isn't the only Aarch64 directory in the tree, let's
keep from adding more of them.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
ArmMmuStandaloneMmLib.inf cannot be built for ARM so move it to the
[Components.AARCH64] section in ArmPkg.dsc.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
The Standalone MM environment runs in S-EL0 in AArch64 on ARM Standard
Platforms. Privileged firmware e.g. ARM Trusted Firmware sets up its
architectural context including the initial translation tables for the
S-EL1/EL0 translation regime. The MM environment will still request ARM
TF to change the memory attributes of memory regions during
initialization.
The Standalone MM image is a FV that encapsulates the MM foundation
and drivers. These are PE-COFF images with data and text segments.
To initialise the MM environment, Arm Trusted Firmware has to create
translation tables with sane default attributes for the memory
occupied by the FV. This library sends SVCs to ARM Trusted Firmware
to request memory permissions change for data and text segments.
This patch adds a simple MMU library suitable for execution in S-EL0 and
requesting memory permissions change operations from Arm Trusted Firmware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
PI v1.5 Specification Volume 4 defines Management Mode Core Interface
and defines EFI_MM_COMMUNICATION_PROTOCOL. This protocol provides a
means of communicating between drivers outside of MM and MMI
handlers inside of MM.
This patch implements the EFI_MM_COMMUNICATION_PROTOCOL DXE runtime
driver for AARCH64 platforms. It uses SMCs allocated from the standard
SMC range defined in DEN0060A_ARM_MM_Interface_Specification.pdf
to communicate with the standalone MM environment in the secure world.
This patch also adds the MM Communication driver (.inf) file to
define entry point for this driver and other compile
related information the driver needs.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
This patch defines PCDs to describe the base address and size of
communication buffer between normal world (uefi) and standalone MM
environment in the secure world.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Sughosh Ganu <sughosh.ganu@arm.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
We no longer use per-instance GUIDs to identify NOR flash banks so
there is no longer a need to define them. Drop the Guid member from
the NOR_FLASH_DESCRIPTION type.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
https://bugzilla.tianocore.org/show_bug.cgi?id=1356
Current PcdVpdBaseAddress is 32bit static Pcd. NON SPI platform needs to
configure it as Dynamic PCD. Emulator platform (such as NT32) may set its
value to 64bit address.
To meet with this usage, 64bit DynamicEx PcdVpdBaseAddress64 is introduced.
If its value is not zero, it will be used.
If its value is zero, static PcdVpdBaseAddress will be used.
When NON SPI platform enables VPD PCD, they need to set PcdVpdBaseAddress64.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Liming Gao <liming.gao@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Dandan Bi <dandan.bi@intel.com>
NorFlashQemuLib is one of the last remaining drivers in ArmVirtPkg
that are not based on the device tree received from QEMU.
For ArmVirtQemu, this does not really matter, given that the NOR
flash banks are always the same: the PEI code is linked to execute
in place from flash bank #0, and the fixed varstore PCDs refer to
flash bank #1 directly.
However, ArmVirtQemuKernel can execute at any offset, permitting it
to be used as an intermediary loader when running QEMU with secure
world emulation enabled, in which case NOR flash bank #0 is secure
only and contains the secure world firmware. In this case,
NorFlashQemuLib should not expose the first flash bank at all.
To prevent introducing too much internal knowledge about which flash
bank is accessible under which circumstances, let's switch to using
the DTB to decide which flash banks to expose to the NOR flash driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
DT has a [pseudo-]standardized 'status' property that can be set on
any node, and which signifies that a node should be treated as
absent unless it is set to 'ok' or 'okay'. So take this into account
when iterating over nodes.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently, each flash bank controlled by ArmPlatformPkg/NorFlashDxe
has its own VendorHw GUID, and instances of NorFlashPlatformLib
describe each bank to the driver, along with the GUID for each.
This works ok for bare metal platforms, but it would be useful for
virtual platforms if we could obtain this information from a
device tree, which would require us to invent GUIDs on the fly,
given that the 'cfi-flash' binding does not include a GUID.
So instead, let's switch to a single GUID for all flash banks,
and update the driver's device path handling to include an index
to identify each bank uniquely.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
A subsequent patch will change the layout of devicepath nodes
produced by this driver. In preparation, make some tweaks to
the code to use a packed struct for the devicepath and to pass
the device index to NorFlashCreateInstance(). These are cosmetic
changes only, the resulting binaries should be identical.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Thomas Abraham <thomas.abraham@arm.com>
The last remaining users of the BdsLib.h header reside in the
edk2-platforms tree, and so it has been copied there. This
allows us to remove the original from ArmPkg.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Remove unused module type restriction for NULL instance.
Cc: Star Zeng <star.zeng@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jiewen Yao <jiewen.yao@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Remove the duplicated IScsiDxe driver from FDF; Add required shell libraries; Update SYSTEM_CONFIGURATION data structure.
Test: Install and boot Windows 10.
Cc: Zailiang Sun <zailiang.sun@intel.com>
Cc: Yi Qian <yi.qian@intel.com>
Cc: Michael Kinney <michael.d.kinney@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: David Wei <david.wei@intel.com>
Print debug messages if size of the VariableName plus DataSize exceeds
Max(Auth|Voltaile)VariableSize bytes. The messages will be useful if any
platform specific value of Max(Auth|Voltaile)VariableSize PCDs have to
be changed.
Cc: Star Zeng <star.zeng@intel.com>
Cc: Jian J Wang <jian.j.wang@intel.com>
Cc: Ruiyu Ni <ruiyu.ni@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Vijayenthiran Subramaniam <vijayenthiran.subramaniam@arm.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Our poor man's implementation of EnterS3WithImmediateWake () currently
sets a high TPL level to disable interrupts, and simply calls the
PEI entrypoint again after disabling the MMU.
Unfortunately, this is not sufficient: DMA capable devices such as
network controllers or USB controllers may still be enabled and
writing to memory, e.g., in response to incoming network packets.
So instead, do the full ExitBootServices() dance: allocate space and
get the memory map, call ExitBootServices(), and in case it fails, get
the memory map again and call ExitBootServices() again. This ensures
that all cleanup related to DMA capable devices is performed before
doing the warm reset.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
In function UiDisplayMenu, the NewPos ptr which used to point to the
highlight menu entry. It will always point to the menu entry which
need to be highlighted or the gMenuOption menu if the highlight menu
is not found.
So we can remove the NULL ptr check for NewPos in this function.
And add the ASSERT code to avoid if any false positive reports
of NULL pointer dereference issue raised from static analysis.
Cc: Liming Gao <liming.gao@intel.com>
Cc: Eric Dong <eric.dong@intel.com>
Cc: Star Zeng <star.zeng@intel.com>
Cc: Hao Wu <hao.a.wu@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Dandan Bi <dandan.bi@intel.com>
Reviewed-by: Star Zeng <star.zeng@intel.com>
Reviewed-by: Liming Gao <liming.gao@intel.com>
BAR | std vga | vmsvga
---------------------------------
0 | Framebuffer | I/O space
1 | Reserved | Framebuffer
2 | MMIO | FIFO
- We cannot recognize VMW SVGA as BOCHS because that would confuse the
IsQxl setting in QemuVideoControllerDriverStart(),
- We cannot recognize VMW SVGA as BOCHS_MMIO because BAR2 on VMW SVGA is
not the BOCHS MMIO BAR (we can only use port IO).
Therefore the list of reasons for which we should introduce
QEMU_VIDEO_VMWARE_SVGA should name three reasons:
(1) Get framebuffer from correct PCI BAR
(2) Prevent using BAR2 for MMIO
(3) Prevent mis-recognizing VMW SVGA as QXL
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
This reverts commit 05a5379458.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we reverted the initialization of VMWare SVGA device,
we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 438ada5aa5)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit c137d95081.
The VMWare SVGA model now -- since commit 104bd1dc70 in QEMU --
falls back to stdvga (that is, Bochs) if we don't setup VMWare SVGA
FIFO.
To simplify QemuVideoDxe, we don't intend to implement the VMWare SVGA
FIFO setup feature. It means our current VMW SVGA driver code is
basically dead. To simplify the problem, we will replace the old
VMWare SVGA driver to Bochs interface. It should work on all QEMU
version.
The first step for using Bochs interface is to revert old driver.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit 98856a724c)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This reverts commit b2959e9f1a.
The VMWare SVGA display device implemented by Qemu (-vga vmware) uses
an I/O-type BAR which is laid out such that some register offsets are
not aligned to the read/write width with which they are expected to be
accessed. However, we will revert the initialization of VMWare SVGA
device later, we don't need such unaligned I/O.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: yuchenlin <yuchenlin@synology.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Regression-tested-by: Laszlo Ersek <lersek@redhat.com>
(cherry picked from commit e038bde267)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Some SdMmc host controllers are run by clocks with different
frequency than it is reflected in Capabilities Register 1.
It is allowed by SDHCI specification ver. 4.2 - if BaseClkFreq
field value of the Capability Register 1 is zero, the clock
frequency must be obtained via another method.
Because the bitfield is only 8 bits wide, a maximum value
that could be obtained from hardware is 255MHz.
In case the actual frequency exceeds 255MHz, the 8-bit BaseClkFreq
member of SD_MMC_HC_SLOT_CAP structure occurs to be not sufficient
to be used for setting the clock speed in SdMmcHcClockSupply
function.
This patch adds new UINT32 array ('BaseClkFreq[]') to
SD_MMC_HC_PRIVATE_DATA structure for specifying
the input clock speed for each slot of the host controller.
All routines that are used for clock configuration are
updated accordingly.
This patch also adds new IN OUT BaseClockFreq field
in the Capability callback of the SdMmcOverride,
protocol which allows to update BaseClkFreq value.
The patch reuses original commit from edk2-platforms:
20f6f144d3a8 ("Marvell/Drivers: XenonDxe: Allow overriding base clock
frequency")
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controlers need to do additional operations after clock
frequency switch.
This patch add new callback type to NotifyPhase of the SdMmcOverride
protocol. It is called after SdMmcHcClockSupply.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Some SD Host Controllers use different values in Host Control 2 Register
to select UHS Mode. This patch adds a new UhsSignaling type routine to
the NotifyPhase of the SdMmcOverride protocol.
UHS signaling configuration is moved to a common, default routine
(SdMmcHcUhsSignaling). After it is executed, the protocol producer
can override the values if needed.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
In order to ensure bigger flexibility in the NotifyPhase
routine of the SdMmcOverride protocol, enable using an
optional phase-specific data. This will allow to exchange
more information between the protocol producer driver
and SdMmcPciHcDxe in the newly added callbacks.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
REF: https://bugzilla.tianocore.org/show_bug.cgi?id=1300
Provides PCD selection for FSP Wrapper to support Dispatch
mode. Also PcdFspmBaseAddress should support Dynamic for
recovery scenario (multiple FSP-M binary in flash)
Test: Verified on internal platform and both API and
DISPATCH modes booted successfully.
Cc: Jiewen Yao <Jiewen.yao@intel.com>
Cc: Desimone Nathaniel L <nathaniel.l.desimone@intel.com>
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Chasel Chiu <chasel.chiu@intel.com>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
When setting up the stack in the startup code and jumping into C code
for the first time, ensure that the frame pointer register is cleared
so that backtraces terminate correctly. Otherwise, output like the
below is shown when encountering an exception on a DEBUG build:
Synchronous Exception at 0x0000000078A14780
PC 0x000078A14780 (0x000078A00000+0x00014780) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A10634 (0x000078A00000+0x00010634) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11CF0 (0x000078A00000+0x00011CF0) [ 0] ArmVeNorFlashDxe.dll
PC 0x000078A11DD0 (0x000078A00000+0x00011DD0) [ 0] ArmVeNorFlashDxe.dll
PC 0x00007BC9D87C (0x00007BC98000+0x0000587C) [ 1] PartitionDxe.dll
PC 0x00007BC99B3C (0x00007BC98000+0x00001B3C) [ 1] PartitionDxe.dll
PC 0x00007F362F50 (0x00007F359000+0x00009F50) [ 2] DxeCore.dll
PC 0x00007BD63BB0 (0x00007BD5B000+0x00008BB0) [ 3] BdsDxe.dll
PC 0x00007BD6EE00 (0x00007BD5B000+0x00013E00) [ 3] BdsDxe.dll
PC 0x00007BD67C70 (0x00007BD5B000+0x0000CC70) [ 3] BdsDxe.dll
PC 0x00007F3724F0 (0x00007F359000+0x000194F0) [ 4] DxeCore.dll
PC 0x00004008FC30
PC 0x000040090130
PC 0x5800F6025800F5E1
Recursive exception occurred while dumping the CPU state
which is rather unhelpful, given that this prevent the remaining debug
output from being printed (register dump, stack dump, fault related
system registers etc)
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
SdReadWrite can be called with a NULL Token for synchronous operations.
Add guard for DEBUG print to only print event pointer with Token is not
NULL.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Jeff Brasen <jbrasen@nvidia.com>
Reviewed-by: Hao Wu <hao.a.wu@intel.com>
Fix a typo in the 32-bit ARM version of the GICv3 driver, which uses
the wrong system register encoding to access ICC_IAR1, and attempted
to access ICC_IAR0 instead. This results in boot time hangs both
under QEMU emulation and on real hardware.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
BaseIoLibIntrinsicArmVirt was created to prevent LTO from merging
accesses to MMIO regions, resulting in instructions with multiple
output registers that KVM on ARM cannot emulate (since the exception
syndrome information that KVM relies on can only describe a single
output register)
However, using double word loads on ARM amounts to the same thing,
and so code that relies on doing 64-bit MMIO to regions that are
emulated under KVM (such as the GICv3 TYPER register) will still
suffer from the original issue.
So replace ldrd and strd with equivalent two instruction sequences.
Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org>
2018-11-15 04:31:42 -08:00
15841 changed files with 288512 additions and 2849287 deletions
* PyTools - https://github.com/tianocore/edk2-pytool-extensions and https://github.com/tianocore/edk2-pytool-library
## Lessons Learned
### Templates and parameters
They are great but evil. If they are used as part of determining the steps of a build they must resolve before the build starts. They can not use variables set in a yml or determined as part of a matrix. If they are used in a step then they can be bound late.
### File matching patterns
On Linux this can hang if there are too many files in the search list.
### Templates and file splitting
Suggestion is to do one big yaml file that does what you want for one of your targets. Then do the second one and find the deltas. From that you can start to figure out the right split of files, steps, jobs.
### Conditional steps
If you want the step to show up in the log but not run, use a step conditional. This is great when a platform doesn't currently support a feature but you want the builders to know that the features exists and maybe someday it will.
If you want the step to not show up use a template step conditional wrapper. Beware this will be evaluated early (at build start). This can hide things not needed on a given OS for example.
This folder contains azure pipeline yml templates for "Core" and "Platform" Continuous Integration and PR validation.
## Common CI templates
### basetools-build-steps.yml
This template compiles the Edk2 basetools from source. The steps in this template are
conditional and will only run if variable `pkg_count` is greater than 0.
It also has two conditional steps only used when the toolchain contains GCC. These two steps
use `apt` to update the system packages and add those necessary for Edk2 builds.
## Core CI templates
### pr-gate-build-job.yml
This templates contains the jobs and most importantly the matrix of which packages and
targets to run for Core CI.
### pr-gate-steps.yml
This template is the main Core CI template. It controls all the steps run and is responsible for most functionality of the Core CI process. This template sets
the `pkg_count` variable using the `stuart_pr_eval` tool when the
build type is "pull request"
### spell-check-prereq-steps.yml
This template installs the node based tools used by the spell checker plugin. The steps
in this template are conditional and will only run if variable `pkg_count` is greater than 0.
## Platform CI templates
### platform-build-run-steps.yml
This template makes heavy use of pytools to build and run a platform in the Edk2 repo
Also uses basetools-build-steps.yml to compile basetools
#### Special Notes
* For a build type of pull request it will conditionally build if the patches change files that impact the platform.
* uses `stuart_pr_eval` to determine impact
* For manual builds or CI builds it will always build the platform
* It compiles basetools from source
* Will use `stuart_build --FlashOnly` to attempt to run the built image if the `Run` parameter is set.
* See the parameters block for expected configuration options
* Parameter `extra_install_step` allows the caller to insert extra steps. This is useful if additional dependencies, tools, or other things need to be installed. Here is an example of installing qemu on Windows.
All of the modules that are included in the `Components` section of this
DSC should be of type HOST_APPLICATION.
### GUID Uniqueness Test - GuidCheck
This test works on the collection of all packages rather than an individual
package. It looks at all FILE_GUIDs and GUIDs declared in DEC files and ensures
that they are unique for the codebase. This prevents, for example, accidental
duplication of GUIDs when using an existing INF as a template for a new module.
### Cross-Package Dependency Test - DependencyCheck
This test compares the list of all packages used in INFs files for a given
package against a list of "allowed dependencies" in plugin configuration for
that package. Any module that depends on a disallowed package will cause a test
failure.
### Library Declaration Test - LibraryClassCheck
This test scans at all library header files found in the `Library` folders in
all of the package's declared include directories and ensures that all files
have a matching LibraryClass declaration in the DEC file for the package. Any
missing declarations will cause a failure.
### Invalid Character Test - CharEncodingCheck
This test scans all files in a package to make sure that there are no invalid
Unicode characters that may cause build errors in some character
sets/localizations.
### Spell Checking - cspell
This test runs a spell checker on all files within the package. This is done
using the NodeJs cspell tool. For details check `.pytool/Plugin/SpellCheck`.
For this plugin to run during ci you must install nodejs and cspell and have
both available to the command line when running your CI.
Install
* Install nodejs from https://nodejs.org/en/
* Install cspell
1. Open cmd prompt with access to node and npm
2. Run `npm install -g cspell`
More cspell info: https://github.com/streetsidesoftware/cspell
## PyTool Scopes
Scopes are how the PyTool ext_dep, path_env, and plugins are activated. Meaning
that if an invocable process has a scope active then those ext_dep and path_env
will be active. To allow easy integration of PyTools capabilities there are a
few standard scopes.
| Scope | Invocable | Description |
| :---- | :----- | :---- |
| global | edk2_invocable++ - should be base_abstract_invocable | Running an invocables |
| global-win | edk2_invocable++ | Running on Microsoft Windows |
| global-nix | edk2_invocable++ | Running on Linux based OS |
| edk2-build | | This indicates that an invocable is building EDK2 based UEFI code |
| cibuild | set in .pytool/CISettings.py | Suggested target for edk2 continuous integration builds. Tools used for CiBuilds can use this scope. Example: asl compiler |
| host-based-test | set in .pytool/CISettings.py | Turns on the host based tests and plugin |
| host-test-win | set in .pytool/CISettings.py | Enables the host based test runner for Windows |
## Future investments
* PatchCheck tests as plugins
* MacOS/xcode support
* Clang/LLVM support
* Visual Studio AARCH64 and ARM support
* BaseTools C tools CI/PR and binary release process
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.